Troubleshooting Guide
|
|
- Melissa Ellis
- 5 years ago
- Views:
Transcription
1 Troubleshooting Guide
2 Updated Information Revision Description Creator 1.0 Initial release Jay Mullen 2 7xi Troubleshooting Guide Johnson Health Tech North America
3 Table of Contents: A. No Netpulse Network Connectivity... 4 B. You are unable to access the internet... 6 C. TV Tuner... 8 D. Virtual Active content not found E. Touch Screen user and register buttons unresponsive F. BootMgr Error G. Weather map won t load H. The time on my machine is incorrect I. Touch Screen Unresponsive J. Unable to Boot into Matrix Home screen xi Troubleshooting Guide Johnson Health Tech North America
4 A. No Netpulse Network Connectivity 1. Occasionally, you may experience issues when you attempt to access On Demand TV, On Demand Music Videos, Personal Playlist, Virtual Active, Workout Tracking and more. See Figures A-1A, A-1B & A-1C FIG. A-1A FIG. A-1B FIG. A-1C Usually the issue can be resolved by doing the following: 2. If you have a Netpulse Gateway at your location, make sure it is plugged in and all connections to it are secure. 3. Check your router to make sure all connections are correct and secure. Other things to check: 4. Unplug both the router and gateway for 30 seconds. 5. Plug your gateway back in first. Wait until the gateway is connected, indicated by green light. 6. Plug your router back in and try to view the On Demand program again. 7. If the Netpulse gateway still doesn t connect, the Matrix Fitness 7xi needs to get sync up and running. 8. Open the 7xi Service Mode screen. Press the Enter key, , Enter key. 9. Tap or click Netpulse. 10. If you see the following message, This machine has never been installed on the Netpulse network, then your machine will need to be synchronized with the Netpulse system. See Figure A-2 4 7xi Troubleshooting Guide Johnson Health Tech North America
5 FIG.A Tap or click Test Network. 12. Verify initial connectivity and all network tests passed. See Figure A-3 FIG. A Tap or click Install. 14. Verify server installation was successful. See Figure A-4 5 7xi Troubleshooting Guide Johnson Health Tech North America
6 FIG.A-4 Note: You must wait at least 5 minutes for network configuration before accessing the On Demand program. 15. If you still cannot access the internet, go to step B. B. You are unable to access the internet 1. Open the 7xi Service Mode screen. Press the Enter key, , Enter key. 2. To view connectivity information, tap or click Network. See Figure B-1A & B-1B FIG. B-1A FIG. B-1B 3. If the Network Setup fields are empty, if the IP Address is not present, you are not connected. Either the Ethernet cable is not connected or there is a problem with the network connection. (Wired Connection) 4. Turn off the console. 5. To connect any devices with a wire, simply plug the Ethernet cable from the output jack of the Ethernet hub or switch to the Matrix Fitness 7xi, no passwords will be required for wired connection. 6 7xi Troubleshooting Guide Johnson Health Tech North America
7 6. Turn on the console. Go to 7xi Service Mode screen. Press the Enter key, , Enter key. Check the Network Setup fields again. Check the IP Address for a valid IP Address. See Figure B-2 FIG.B-2 (Wireless Connection) 7. Using the wireless networking requires the use of the integrated wireless adapter built-in. 8. The console features a wireless network mode that allows you to set up a wireless network connection. 9. To enter Matrix 7xi Update Manager, press the Enter key, , Enter key. 10. Tap or click Settings. 11. Tap or click Set Wireless Defaults for automatic network configuration. After a few moments, ensure that the message Successfully connected to wireless network is displayed. If the message shows Failed to connect to wireless network! you will need to diagnose your networking issue. See Figures B-3A & B-3B FIG. B-3A FIG. B-3B 12. Go to 7xi Service Mode screen. Press the Enter key, , Enter key. Check the Network Setup fields again. Check the IP Address for a valid IP Address. See Figure B-4 7 7xi Troubleshooting Guide Johnson Health Tech North America
8 FIG. B If you are still having trouble connecting, there could be a problem with the server you are trying to connect to. For assistance, contact your network administrator. 14. If you determine that the equipment needs service, contact a Matrix Fitness authorized service provider in your area. C. TV Tuner i. Black screen in the TV app preview window. See Figure C-1 FIG.C-1 a 1. The console does not detect a device or cable connected to it. Check that the coaxial cable from the wall outlet to the Matrix Fitness 7xi is connected properly and firm. 2. If the video signal can be verified up to the tuner, connect a known good signal directly into the tuner. If the channel lineup on the console has been confirmed correct, the signal is good, the unit has been rebooted, the software is correct, and the screen is still black, the tuner has likely failed. Replace the tuner. 8 7xi Troubleshooting Guide Johnson Health Tech North America
9 3. If you still are having a problem, please contact a Matrix Fitness authorized service provider in your area or cable service. ii. FIG.C-2 You may receive a Please wait, initializing TV message when you select the TV app. See Figure C-2 4. Go to 7xi Service Mode screen. Press the Enter key, , Enter key. Check if the tuner hardware has been detected. See Figure C-3 FIG.C-3 5. The TV signal cannot be configured because no tuner hardware detected. 6. First, try rebooting the system. You may have to update the drivers for the TV tuner. 7. If you are still getting the above error, install the latest driver for your Hauppauge WinTv product. 8. Type to start the installation procedure. See Figure C-4 9 7xi Troubleshooting Guide Johnson Health Tech North America
10 FIG.C-4 9. When finished you will be prompted to reboot. Once you reboot, the Hauppauge driver will be installed and ready for use for your product. D. Virtual Active content not found. See Figures D-1A & D-1B FIG.D-1A FIG.D-1B 1. This problem is usually related to an incorrect configuration or a component that has not been installed. 2. Verify the USB Flash Drive is installed into the USB Drive Port inside of the Matrix 7xi console. 3. Go to 7xi Service Mode screen. Press the Enter key, , Enter key. Tap or click Virtual Active. Verify that the path variable is set, Root Path = D: E. Touch Screen user and register buttons unresponsive. See Figure E xi Troubleshooting Guide Johnson Health Tech North America
11 FIG.E-1 1. Reboot the machine. This will clear the memory and restore the unit to normal operation. 2. If the user and register buttons are still unresponsive, go to section A, No Netpulse Network Connectivity. 3. If you have performed all procedures described in section A, No Netpulse Network Connectivity and the buttons still not work, then replace the entire console. F. BootMgr Error. See Figure F-1 FIG.F-1 1. The following may be reasons if your system has encountered the BOOTMGR is missing error shortly when the console is turned on: a. Corrupt and misconfigured files b. Operating system upgrade issues c. Your system is attempting to boot from the drive that s not properly configured, such as a non-bootable source. 2. Firstly, reboot your system. The BOOTMGR error could be a fluke. 3. Reseat the internal CF Flash card. 4. Check the boot sequence in BIOS and make sure the correct bootable device is listed first. G. Weather map won t load. See Figure G xi Troubleshooting Guide Johnson Health Tech North America
12 FIG.G-1 1. The message Loading appears when your Matrix 7xi device loads a new map or when your device is not connected to the network. 2. If the message Loading appears for a long time, verify that your device is connected to the network. H. The time on my machine is incorrect. 1. Specify your time zone. 2. Go to 7xi Service Mode screen, to access the General settings. Press the Enter key, , Enter key. 3. To select a time zone settings tap or click RIGHT ARROW button to move forward between frames. 4. Select your region (or country) and time zone form the Time Zone drop-down list. I. Touch Screen Unresponsive. Touch screen does not respond to any touches. Console has locked up. 1. Reboot the machine. 2. If touch screen has failed entirely, console will need to be replaced. J. Unable to Boot into Matrix Home screen. You are unable to boot normally due to file system errors (data corruption and loss). 1. Shut down the Matrix 7xi console. 2. Disconnect all peripheral devices (if connected), such as flash drives, ipods and any Ethernet cables. 3. Start up your Matrix 7xi console. 4. If the issue persists, check your cables and power source. 12 7xi Troubleshooting Guide Johnson Health Tech North America
13 5. If the issue persists after you follow the above steps, in many cases, you may need to completely reinstall the operating system. This process will erase all files from your Compact Flash Media. Common causes of data corruption and loss include: 6. Power outages or other power-related problems. 7. Improper shutdowns, such as caused by power outages or performing a hard restart: restarting a frozen or hung system via the power button. (Strongly recommend to use the safe reboot key code: ) 8. Hardware problems or failures, including hard drive failures, bad sectors, bad RAM, and the like. 13 7xi Troubleshooting Guide Johnson Health Tech North America
TROUBLESHOOTING GUIDE
TROUBLESHOOTING GUIDE Difficulty installing apps on LeapFrog Epic tablet Q: While purchased apps appear in the App Manager on the "Not installed" tab, the Install button is grayed out. How can I install
More informationGetting Started. HP Business PCs
Getting Started HP Business PCs Copyright 2010, 2012-2014, 2016 HP Development Company, L.P. Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
More informationGetting Started. HP Business PCs
Getting Started HP Business PCs Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Windows is a U.S. registered trademark of
More informationWhat this Guide Covers. Additional Info. 1. Linux based Servers. 2. Windows Servers. 3. GoldLite and Virtual Servers. 4. Other servers. 5.
This guide is designed to assist in shutting down the Gold Servers ensuring a clean reboot of the systems. This should be done by the System Administrators with all users logged off the system and any
More informationChapter 14: Advanced Troubleshooting
Chapter 14: Advanced Troubleshooting IT Essentials v6.0 ITE v6.0 1 Chapter 14 - Sections & Objectives 14.0 Introduction Review Troubleshooting Steps 14.1 Computer Components and Peripherals Troubleshoot
More informationHip Smarthome - Systems User Manual
Hip Smarthome - Systems User Manual Contents 1. Hip SmartHub Connection / Setup... 3 1.1. Setup Guide... 3 2. Hip SmartTV Connection / Setup... 5 2.1. Setup Guide... 5 3. Hip SmartMusic Connection / Setup...
More informationHome automation hub installation and setup guide
installation and setup guide is placed in a closed off area, the wireless signal strength may be compromised. Note: To prevent radio frequency (RF) interference, we recommend that you place the away from
More informationST-HD-CVR4CH ST-HD-CVR8CH ST-HD-CVR16CH. Professional Digital Video Recorders QUICK START GUIDE
ST-HD-CVR4CH ST-HD-CVR8CH ST-HD-CVR16CH Professional Digital Video Recorders QUICK START GUIDE 1 Thank you for your purchase of this SecurityTronix HD-COAXINATOR Video Recorder (CVR). Documentation for
More informationHow To Force Restore A Computer That Won Boot Up After System
How To Force Restore A Computer That Won Boot Up After System If your computer won't start up normally, you may need to use a disk repair utility This can occur after an improper shutdown, forced restart,
More informationFinding information on your computer
Important Be sure to create recovery discs immediately after your computer is ready for use because there are no recovery discs provided with the computer. For instructions on how to create the recovery
More informationTroubleshooting. Troubleshooting Overview CHAPTER
CHAPTER 4 This chapter provides basic installation troubleshooting information. The chapter includes the following sections: Overview Initialization and Self-Test Problems Subsystems Further Contacts This
More informationSTART HERE. Wireless USB Wired. Do you want to connect the printer to a wireless network? Use the Wireless Setup and Connection.
START HERE If you answer yes to any of these questions, turn to the section indicated for Setup and Connection instructions. Do you want to connect the printer to a wireless network? Use the Wireless Setup
More informationiphone, ipad & ipod troubleshooting guide
iphone, ipad & ipod troubleshooting guide FREE checklist of things to try and get your device working again Page 1 of 11 visit: http://www.netchimp.co.uk/ Contents Why have this guide? 3 Troubleshooting
More informationAction Items SYSTEM REQUIREMENTS
Admin Training Guide Version 1.9 January 2018 ... Action Items Prior to setting up and installing your BlueJeans Room with Dolby Conference Phone, it is recommended that the following items are reviewed
More informationST-HVR8704 ST-HVR8708 ST-HVR8716. Professional Digital Video Recorders QUICK START GUIDE
ST-HVR8704 ST-HVR8708 ST-HVR8716 Professional Digital Video Recorders QUICK START GUIDE 1 Thank you for purchasing this SecurityTronix Hybrid Video Recorder! The documentation for this HVR comes in 2 formats;
More informationThe following documents are included with your Sony VAIO computer.
Documentation The following documents are included with your Sony VAIO computer. Printed Documentation Quick Start Guide Describes the process from unpacking to starting up your VAIO. Troubleshooting and
More informationWELCOME USING SONOS COPYRIGHT TVTI ALL RIGHTS RESERVED
WELCOME HOW TO RECONNECT YOUR SONOS SYSTEM TO A NEW ROUTER OR WIFI NETWORK IF YOU VE HAD ENOUGH OF LONG BUFFERING TIMES WHEN STREAMING MOVIES, SLOW DOWNLOAD RATES AND FREQUENT INTERRUPTIONS TO YOUR WIFI
More informationQuick Setup & Getting Started Business PCs
Quick Setup & Getting Started Business PCs Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft, Windows, and Windows
More informationInstructions for SimplicityTouch ST-700 Gen 3 TECHNICAL TRAINING GUIDE
Page 1 Instructions for SimplicityTouch ST-700 Gen 3 TECHNICAL TRAINING GUIDE Manuals included in guide: 1. Update panel firmware and reinstall applications. page 2 2. Update router firmware page 10 3.
More informationREAD ME FIRST Windows 98/ME/2000
READ ME FIRST Windows 98/ME/2000 *DSL Equipment Installation Guide: Alcatel Speed Touch PC *Digital Subscriber Line Part Number: AlcatelPC9x02A Version 1.2-A Table of Contents Follow Steps 1 through 7
More information7XI Console Set-Up. Warehouse Set-Up. 1 P age
7XI Console Set-Up Warehouse Set-Up 1. Using the keypad, type in ENTER 4005 ENTER. A message will pop up asking if you would like to set to default settings. Select Yes. Unit will reboot and take you to
More informationStep 1: Find a spot for your Wifi point
Let's get you set up with your new Google Wifi system. Here s what you ll need to get started: Google Wifi point(s) Google Account Google Wifi app for Android 4 and up or ios 9 and up Broadband connection
More informationNOTE: If the printer is connected with a USB or Ethernet cable, the printer cannot connect wirelessly.
HP Printers - Wireless Troubleshooting Restart the router and printer Restart the router and printer to resolve any connectivity error states. NOTE: The following steps temporarily disconnect network and
More informationTranquil T7-HSA. Harmony Home Server
Tranquil T7-HSA Harmony Home Server Protect Connect Organise Grow Iss1.0 Thank you for purchasing the Tranquil Harmony Home Server This appliance, if cared for and used correctly will provide many years
More informationUsing memory cards (not supplied)
Chapter 1. Getting to know your computer Using memory cards (not supplied) Your computer supports the following types of memory cards: Secure Digital (SD) card Secure Digital High Capacity (SDHC) card
More informationTitan V9 BIOS and Shell Upgrade ECN For all Titan Consoles
Titan V9 BIOS and Shell Upgrade ECN 0204 For all Titan Consoles Version 1.2 This document, the product and procedures it describes within are intellectual property of Avolites Ltd. at all times. The use
More informationHP Notebook PCs - Keyboard and TouchPad or ClickPad Guided Troubleshooter
HP Notebook PCs - Keyboard and TouchPad or ClickPad Guided Troubleshooter This document applies to HP notebook computers. The keyboard, TouchPad, or ClickPad on your laptop is not working as expected:
More informationThis Upgrade Is Only Valid For The US Cellular SCH-I500 (Mesmerize). It Is Incompatible With All Other Models. Requirements
Samsung has released a software update for the US Cellular SCH-I500 (Mesmerize) which is recommended to be installed. This software will update your Samsung SCH-I500 (Mesmerize) to Android 2.3.4 software
More informationGETTING CONNECTED Installation instructions for your NBN Modem Sagemcom 5356
GETTING CONNECTED Installation instructions for your NBN Modem Sagemcom 5356 This guide is designed to help you get started with your new modem. It relates to services being delivered over NBN FTTN connections.
More informationFiery proserver User Guide
Fiery proserver User Guide Congratulations on your purchase of the Fiery proserver, a powerful production solution for your printer. Before you begin Make sure that you have: About this document Installed
More informationFiery proserver User Guide
Fiery proserver User Guide Congratulations on your purchase of the EFI Fiery proserver, a powerful production solution for your printer. Before you begin Make sure that you have: About this document Installed
More informationTroubleshooting. Troubleshooting Overview CHAPTER
CHAPTER 4 This chapter provides basic installation troubleshooting information. The chapter includes the following sections: Overview Initialization and Self-Test Problems Subsystems Using the Reset Switch
More informationInstalling macos High Sierra
Install macos High Sierra on a blank hard drive. Written By: Arthur Shi ifixit CC BY-NC-SA www.ifixit.com Page 1 of 8 INTRODUCTION If you have recently upgraded or replaced the hard drive for your MacBook
More informationContents. Getting Started...1. Managing Your Drives...9. Backing Up & Restoring Folders Synchronizing Folders...52
Contents Getting Started.....................................................1 Installing the Software...........................................1 Using the Maxtor System Tray Icon................................6
More informationInstallation Manual. February 21, Integra Interactive Inc. All rights reserved
Installation Manual February 21, 2011 2000-2011 Integra Interactive Inc. All rights reserved TABLE OF CONTENTS mymedia ConneXion (MMCX) Computer Installation Pre-Installation Checklist 3 Assembly 3 MMCX
More informationBEFCMU10 EtherFast Cable Modem with USB and Ethernet Connection. 12V-DC (0.6A min) power is connected. OFF
LED Table LED Color Mode Function Power Green ON 12V-DC (0.6A min) power is connected. OFF Power is not connected, power supply is incorrect or bad, or BEFCMU10 is bad. Activity Green ON Connection to
More informationCLIQ.mini Installation and Setup Guide
CLIQ.mini Installation and Setup Guide Last modified: 04/06/18 Description The Clare Controls CLIQ.mini controller provides all device management services, supports all Clare user interface services, and
More informationREAD ME FIRST Windows 95/98/Me/2000
READ ME FIRST Windows 95/98/Me/2000 *DSL Equipment Installation Guide: Efficient Networks 5260 *Digital Subscriber Line Part Number: 52609x02 Version 1.2-A Table of Contents Follow Steps 1 through 8 to
More informationTABLE OF CONTENTS COPYRIGHT INTRODUCTION...3 PRODUCT OVERVIEW...3 COMPONENTS AND FEATURES...3 HARDWARE INSTALLATION
TABLE OF CONTENTS COPYRIGHT...2 1. INTRODUCTION...3 PRODUCT OVERVIEW...3 COMPONENTS AND FEATURES...3 HARDWARE INSTALLATION...3 2. MFP SERVER INSTALLATION...5 PREPARATION...5 CONFIGURATION SOLUTION TABLE...5
More informationNetworking the printer
Networking the printer General networking Networking overview A network is a collection of devices such as computers, printers, Ethernet hubs, wireless access points, and routers connected together for
More informationSetup Instructions for Upgrading the Windows XP Panasonic CF-19 Toughbook to Windows 7
Setup Instructions for Upgrading the Windows XP Panasonic CF-19 Toughbook to Windows 7 Installation Setup Please ensure that the Windows XP CF-19 Toughbook to be upgraded is plugged in but powered OFF
More informationFAQ No Q: What should we know before we start Windows 10 upgrade?
FAQ No. 01695 Important Cautions of Windows 10 Upgrade Affected Model: All Q: What should we know before we start Windows 10 upgrade? A: MSI recommends that user should create system recovery before Windows
More informationREAD ME FIRST. Windows NT. *DSL Equipment Installation Guide: Efficient Networks 5260
READ ME FIRST Windows NT *DSL Equipment Installation Guide: Efficient Networks 5260 *Digital Subscriber Line Part Number: 5260NT02A Version 1.2-A. Table of Contents Follow Steps 1 through 8 to complete
More informationnettalk DUO WiFi Configuration (using an Android smartphone)
nettalk DUO WiFi Configuration (using an Android smartphone) Step 1. Activate your Device a. Locate your username and password inside of the box. b. Go to www.nettalk.com/activate and follow the activation
More informationSamsung Galaxy S 2.1 to 2.3 Update Instructions
Samsung Galaxy S 2.1 to 2.3 Update Instructions NOTE: Based on the software version you are upgrading from, the upgrade will perform different procedures and will required multiple mobile device reboots.
More informationMagic Card User Manual
Table of Contents Magic Card User Manual Magic Card Introduction 2 What is Magic card? 2 Magic Card Features 2 Working Modes 3 Magic card editions 3 Installation 4 System Requirements 4 Pre-installation
More informationGENERAL SET-UP & APP GENERAL SET-UP & APP PAIRING/SYNCING FEATURES BATTERY ACCOUNT & DEVICE SETTINGS PRIVACY WARRANTY. For IOS:
For IOS: GENERAL SET-UP & APP PAIRING/SYNCING FEATURES BATTERY ACCOUNT & DEVICE SETTINGS PRIVACY WARRANTY GENERAL SET-UP & APP WHICH PHONES ARE COMPATIBLE WITH MY SMARTWATCH? Wear OS by Google works with
More informationRestore Ipod Classic To Factory Settings Without Computer
Restore Ipod Classic To Factory Settings Without Computer Introduction to Restoring Your ipod to Factory Settings following these steps, make sure your sync your ipod in order to back up its data to your
More informationGetting Started. Here's how to get started using your Zip 250 drive: 1. Unpack the Zip 250 drive and accessories.
Getting Started IMPORTANT! Before installing or using your Zip 250 drive, read and follow the USB guidelines to ensure reliable performance of your USB devices. Here's how to get started using your Zip
More informationStart Here! wireless phones and devices within your home or small business environment. The 3G MicroCell is secure and can deliver maximum cellular
AT&T 3G MicroCell User Manual AC Power Adapter AT&T 3G MicroCell TM Getting Started Guide Start Here! Congratulations on the purchase of your new AT&T 3G MicroCell TM. The 3G MicroCell provides voice and
More informationTroubleshooting Initial Startup Problems
Your Cisco ASR 1000 Series Router went through extensive testing before leaving the factory. However, if you encounter problems starting the router, use the information in this chapter to help isolate
More informationHomeTroller Zee S2 Getting Started Guide
HomeTroller Zee S2 Getting Started Guide Congratulations on your purchase! Your HomeTroller Zee S2 is ready to put you in control of your home. Please take a few minutes to read through this guide to familiarize
More informationGENERAL SET-UP & APP PAIRING/SYNCING FEATURES BATTERY ACCOUNT & DEVICE SETTINGS PRIVACY WARRANTY GENERAL SET-UP & APP ANDROID
ANDROID GENERAL SET-UP & APP PAIRING/SYNCING FEATURES BATTERY ACCOUNT & DEVICE SETTINGS PRIVACY WARRANTY GENERAL SET-UP & APP WHICH PHONES ARE COMPATIBLE WITH MY SMARTWATCH? Wear OS by Google works with
More informationREAD ME FIRST Windows 95/98/Me/2000
READ ME FIRST Windows 95/98/Me/2000 *DSL Equipment Installation Guide: Efficient Networks 5260 *Digital Subscriber Line Part Number: 52609X02 Version 1.2 Table of Contents Follow Steps 1 through 8 to complete
More informationLongshine Technologie Europe GmbH LCS-MFP101-2 Multifunction Printserver
Longshine Technologie Europe GmbH LCS-MFP101-2 Multifunction Printserver www.longshine.de TABLE OF CONTENTS COPYRIGHT...2 1. INTRODUCTION...3 PRODUCT OVERVIEW...3 COMPONENTS AND FEATURES...3 HARDWARE INSTALLATION...3
More informationRelease Notes Version of Windows Mobile 5.0 Operating System for the Field PC
Release Notes Version 2.1.5 of Windows Mobile 5.0 Operating System for the Field PC Dec 2008 These release notes describe improvements and important information of Release 2.1.5 of Windows Mobile 5.0 for
More informationConnecting Tablo to Wi-Fi with PC
Connecting Tablo to Wi-Fi with PC Once you have taken your Tablo out of the box and you have attached the power, antenna and hard drive, you are ready to set up Tablo via Wi-Fi. Begin by opening your Chrome
More informationMicroBloggingMD (MBMD) Support Documentation
MicroBloggingMD (MBMD) Support Documentation Contents Index MBMD Mobile Device Installation 2 ios 2 Android 5 MBMD Configuration and Setup 8 MBMD Home Screen 11 MBMD Troubleshooting Matrix 12 Mobile Device
More informationProduct Family: Networking Hardware Number: AN-NH-012
APPLICATION NOTE THIS INFORMATION PROVIDED BY AUTOMATIONDIRECT.COM TECHNICAL SUPPORT These documents are provided by our technical support department to assist others. We do not guarantee that the data
More informationFor Disklavier ENSPIRE Users. powered by RemoteLive. User s Guide
For Disklavier ENSPIRE Users powered by RemoteLive User s Guide Table of Contents Introduction...4 Names of Parts and Their Functions...4 Switch Box (Front and Bottom Panel)...4 Switch Box (Rear Panel)...6
More informationSAMSUNG POWERED WIFI SURROUND SPEAKER
SAMSUNG POWERED WIFI SURROUND SPEAKER MODEL:CAW-02013 PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE OPERATION AND KEEP IT FOR FUTURE REFERENCE FCC Warnings WARNING:Changes or modifications to this
More informationOmniLogic. Consumer Network Troubleshooting Guide. CTSG-OLN150a. Copyright 2016 Hayward Industries Inc.
OmniLogic Consumer Network Troubleshooting Guide CTSG-OLN150a Copyright 2016 Hayward Industries Inc. Safety Precautions Warning! High Voltage Electrocution Hazard Hazardous voltage can shock, burn, cause
More information2. A Wi-Fi Ethernet router (802.11)
What hardware and software do I need? 1. An ipad, iphone or ipod touch with ios 3.1.3 or higher. (the ios version can be verified by opening the Settings App and selecting General, then selecting About
More informationPerform Manual System Restore Xp Safe Mode Not Working
Perform Manual System Restore Xp Safe Mode Not Working If you computer has system problem, you first priority should be to make sure you Windows Advanced Options Menu Please select an option: Safe Mode
More informationApple iphone Troubleshooting-Authorized Service Centers
Store Type Authorized Service Device Type Apple iphones 4, 4S and 5 Overview: The following instructions provide information on troubleshooting the Apple iphone 4, 4S and 5. ASC Techs should attempt to
More informationUser Manual HIGHPOWER TM TOUCH SCREEN WI-FI RANGE EXTENDER S1
User Manual HIGHPOWER TM TOUCH SCREEN WI-FI RANGE EXTENDER S1 1 Table of Contents INTRODUCTION...4 Product view...4 Package Contents...5 Product Description...5 SETUP GUIDE (TOUCH SCREEN)...6 Find a Setup
More informationTaurus Series Multimedia Players XI'AN NOVASTAR TECH CO.,LTD. Common Problems & Remedies Document Version: V1.4.0 Document Number: NS
Taurus Series Multimedia Players Document Version: V1.4.0 Document Number: NS120100420 Copyright 2019 Xi an NovaStar Tech Co., Ltd. All Rights Reserved. No part of this document may be copied, reproduced,
More informationModels Affected: Matrix T7xe/7xe consoles
Effective Date: June 12, 2015 Prepared by: Eric Chen Models Affected: Service Bulletin Matrix T7xe/7xe consoles troubleshooting Matrix T7xe/7xe consoles Bulletin Num. NB-1507008 Ver.2 DESCRIPTION Troubleshooting
More informationParts List: Assembly Instructions:
My Ride SERVICE MANUAl MyRide ASSEMBLY GUIDE 1.1 ASSEMBLY INSTRUCTIONS ASSEMBLING THE MYRIDE Parts List: Heavy Plate Stabilizer Fin - Right Stabilizer Fin - Left Stabilizer Fin - Large Middle Power Cord
More informationHomeTroller Zee Quick-Start Guide
HomeTroller Zee Quick-Start Guide Congratulations on your purchase! Your HomeTroller Zee is ready to put you in control of your home. Please take a few minutes to read through this guide to familiarize
More informationA+ Guide to Software: Managing, Maintaining, and Troubleshooting, 5e. Chapter 7 Fixing Windows Problems
: Managing, Maintaining, and Troubleshooting, 5e Chapter 7 Fixing Windows Problems Objectives Learn what to do when a hardware device, application, or Windows component gives a problem Learn what to do
More informationLongshine Technologie Europe GmbH
Longshine Technologie Europe GmbH www.longshine.de TABLE OF CONTENTS COPYRIGHT...2 1. INTRODUCTION...3 PRODUCT OVERVIEW...3 COMPONENTS AND FEATURES...3 HARDWARE INSTALLATION...3 2. MFP SERVER INSTALLATION...5
More informationHomeTroller S6 Quick-Start Guide
HomeTroller S6 Quick-Start Guide Congratulations on your purchase! Your HomeTroller S6 is ready to put you in control of your home. Please take a few minutes to read through this guide to familiarize yourself
More informationHow to Jailbreak an ipod. Felicia Jimenez Bao Lam Elmer Martinez Lauren Messenger TECM 2700 Terry Smith class
How to Jailbreak an ipod Felicia Jimenez Bao Lam Elmer Martinez Lauren Messenger TECM 2700 Terry Smith 11-12 class 1 Table of Contents Jailbreaking Terminology... 3 Materials Needed for Jailbreaking...
More informationInstalling an OptoBlue Adaptor on Windows 8 Operating System:
Installing an OptoBlue Adaptor on Windows 8 Operating System: Before beginning this process, be sure to save all your work in any open programs. Your computer will reboot during this process. Settings
More information2x2 Video Wall - NEC P Series Displays - Installation Guide
2x2 Video Wall - NEC P Series Displays - Installation Guide Materials Checklist Suggested Tools for Installation Supporting Documents NEC P Series LCD (x4) OPS Media Player (x1) OPS Media Player Caddie
More informationMFC790CW Windows Network Connection Repair Instructions
Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine
More informationTroubleshooting Guide HP Business Desktops dx5150 model
Troubleshooting Guide HP Business Desktops dx5150 model Document Part Number: 375373-002 August 2005 This guide provides helpful hints and solutions for troubleshooting the above products as well as scenarios
More informationHigh Speed Cable Modem
Model CM700 User Manual October 2016 202-11696-02 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register
More informationInstallation guide. A. No, I do not have a router. Choose this option if you have a standard DSL or cable modem and no router.
Installation guide This installation guide will show you how to get your voip phone service working. First, we need to know which set of instructions to give you. Please choose the option below that describes
More informationIPS265T / IPS275T. TimeIPS Server. Installation Guide
IPS265T / IPS275T Server Installation Guide FCC Declaration of Conformity (DoC) Compliance Information (according to FCC 2.1077) (1) Product: IPS265T / IPS275T. The above device complies with Part 15 of
More informationStudent 1 Printer Issues
Student 1 Printer Issues A customer complains that his inkjet printer (attached to a computer with a USB cable) is printing funny characters instead of what it should print. He has been using the printer
More informationCM500 High Speed Cable Modem User Manual
User Manual November 2014 202-11472-03 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label
More informationREAD ME FIRST. *DSL Equipment Installation Guide: Efficient Networks 5260
READ ME FIRST *DSL Equipment Installation Guide: Efficient Networks 5260 *Digital Subscriber Line Part Number: 5260MC02 Version 1.2 Table of Contents Follow Steps 1 through 8 to complete the DSL Equipment
More informationEthernet (CAT5 UTP/Straight-Through) Cable. 5V DC Power Adapter
1 This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. Before You Begin Check Your Package Contents DI-824VUP+ 2.4GHz Wireless VPN Router and
More informationTroubleshooting. Diagnosing Problems CHAPTER
CHAPTER 5 Troubleshooting There are several ways to troubleshoot installation and performance problems. For instance, the front-panel LEDs provide the quickest way to evaluate switch operation. The statistics
More informationFios installation instructions inside
Fios installation instructions inside Here are the items you may need for installation. Fios equipment Router + power cord (You will receive one of the two router models shown below). Video Media Server
More informationReadyNAS OS 6 Desktop Storage Systems Hardware Manual
ReadyNAS OS 6 Desktop Storage Systems Hardware Manual Model ReadyNAS 102, 104 ReadyNAS 202, 204, 212, 214 ReadyNAS 312, 314, 316 ReadyNAS 422, 424, 426, 428 ReadyNAS 516, 524X, 526X, 528X ReadyNAS 626X,
More informationHigh Speed Cable Modem
Model CM1000 User Manual September 2017 202-11804-02 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register
More informationVendor: CompTIA. Exam Code: Exam Name: CompTIA A+ Certification Exam (902) Version: Demo
Vendor: CompTIA Exam Code: 220-902 Exam Name: CompTIA A+ Certification Exam (902) Version: Demo DEMO QUESTION 1 Which of the following best practices is used to fix a zero-day vulnerability on Linux? A.
More informationFirmware Update for the DTR-40.3 and DTR-50.3
Firmware Update for the DTR-40.3 and DTR-50.3 The following outlines the methods to update the firmware via network and via USB storage. Please choose either one that suits your condition. Please note
More informationPTZOptics IP Joystick Controller
PTZOptics IP Joystick Controller Third Generation IP Joystick Controller Installation & Operation Manual Please visit www.ptzoptics.com for the most up to date version of this manual Page1 Table of Contents.
More informationTroubleshooting. Resetting the System. Problems Following Initial System Installation. First Steps Checklist CHAPTER
CHAPTER 6 This chapter helps you identify and solve problems that might occur while you are using the Cisco CDE110. If you are unable to resolve your server problems on your own, contact Cisco Technical
More informationLenovo N22. User Guide. included manuals before using your computer. included manuals before using your computer.
Lenovo N22 User Guide Read Read the the safety safety notices notices and and important important tips tips in in the the included manuals before using your computer. included manuals before using your
More informationItunes Won T Restore My Ipad 2 Won't Connect
Itunes Won T Restore My Ipad 2 Won't Connect Apple Store Mac iphone Watch ipad ipod itunes Support. Search Support If your iphone, ipad, or ipod touch won't connect to a Wi-Fi network Tap Settings _ General
More informationItunes Won T Restore My Ipad 2 Won To Connect
Itunes Won T Restore My Ipad 2 Won To Connect Apple Store Mac iphone Watch ipad ipod itunes Support Forcing your device to restart won't erase the content currently on your device. If you don't see the
More informationQNC Best Practices. System Affected. Description. QNC Configuration Procedure. Technical Bulletin CS-18-04
This technical bulletin explains the best approach to using the QNC tool when deploying handsets and provides tips and tricks on QNC behaviors to help smooth your deployment process. System Affected QNC
More informationIpAlarm Module Set Up
Page 1 IpAlarm Module Set Up Note: This device is shipped configured for Ethernet connectivity. To use in this mode, connect the BLUE Jack (marked WAN) to your router and wait for the LEDs to stabilize.
More informationCM500 High Speed Cable Modem User Manual
User Manual February 2015 202-11477-03 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label
More informationTroubleshooting the System Hardware
CHAPTER 5 This chapter provides basic troubleshooting information to help you identify some common problems that might occur with your Wide Area Virtualization Engine (WAVE). This chapter contains the
More information