For More Information Please contact your local sales office for additional information about Cypress products and solutions.

Size: px

Start display at page:

Download "For More Information Please contact your local sales office for additional information about Cypress products and solutions."

Lawrence Glenn
5 years ago
Views:

The following document contains information on Cypress products. The document has the series name, product name, and ordering part numbering with the prefix MB.

1 The following document contains information on Cypress products. The document has the series name, product name, and ordering part numbering with the prefix MB. However, Cypress will offer these products to new and existing customers with the series name, product name, and ordering part number with the prefix CY. How to Check the Ordering Part Number 1. Go to 2. Enter the keyword (for example, ordering part number) in the SEARCH PCNS field and click Apply. 3. Click the corresponding title from the search results. 4. Download the Affected Parts List file, which has details of all changes For More Information Please contact your local sales office for additional information about Cypress products and solutions. About Cypress Cypress is the leader in advanced embedded system solutions for the world's most innovative automotive, industrial, smart home appliances, consumer electronics and medical products. Cypress' microcontrollers, analog ICs, wireless and USB-based connectivity solutions and reliable, high-performance memories help engineers design differentiated products and get them to market first. Cypress is committed to providing customers with the best support and development resources on the planet enabling them to disrupt markets by creating new product categories in record time. To learn more, go to

F 2 MC-16FX Family MB96300 Series Setup Guide Doc. No. 002-06378 Rev.

2 F 2 MC-16FX Family MB96300 Series Setup Guide Doc. No Rev. *A Cypress Semiconductor 198 Champion Court San Jose, CA Phone (USA): Phone (Intnl):

3 Copyrights Cypress Semiconductor Corporation, This document is the property of Cypress Semiconductor Corporation and its subsidiaries, including Spansion LLC ( Cypress ). This document, including any software or firmware included or referenced in this document ( Software ), is owned by Cypress under the intellectual property laws and treaties of the United States and other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except as specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with Cypress governing the use of the Software, then Cypress hereby grants you a personal, nonexclusive, nontransferable license (without the right to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code form, to modify and reproduce the Software solely for use with Cypress hardware products, only internally within your organization, and (b) to distribute the Software in binary code form externally to end users (either directly or indirectly through resellers and distributors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress s patents that are infringed by the Software (as provided by Cypress, unmodified) to make, use, distribute, and import the Software solely for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the Software is prohibited. TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. To the extent permitted by applicable law, Cypress reserves the right to make changes to this document without further notice. Cypress does not assume any liability arising out of the application or use of any product or circuit described in this document. Any information provided in this document, including any sample design information or programming code, is provided only for reference purposes. It is the responsibility of the user of this document to properly design, program, and test the functionality and safety of any application made of this information and any resulting product. Cypress products are not designed, intended, or authorized for use as critical components in systems designed or intended for the operation of weapons, weapons systems, nuclear installations, life-support devices or systems, other medical devices or systems (including resuscitation equipment and surgical implants), pollution control or hazardous substances management, or other uses where the failure of the device or system could cause personal injury, death, or property damage ( Unintended Uses ). A critical component is any component of a device or system whose failure to perform can be reasonably expected to cause the failure of the device or system, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from or related to all Unintended Uses of Cypress products. You shall indemnify and hold Cypress harmless from and against all claims, costs, damages, and other liabilities, including claims for personal injury or death, arising from or related to any Unintended Uses of Cypress products. Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, PSoC, CapSense, EZ-USB, F-RAM, and Traveo are trademarks or registered trademarks of Cypress in the United States and other countries. For a more complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their respective owners. F 2 MC-16FX Family MB96300 Series Setup Guide, Doc. No Rev. *A 2

4 Contents 1. Setup Procedures Hardware Configuration Hardware Setup Setting up the emulator and each board Jumper settings on the adapter board... 8 Revision History Document Revision History F 2 MC-16FX Family MB96300 Series Setup Guide, Doc. No Rev. *A 3

5 1. Setup Procedures This document explains the debug environment and setup procedures for the Cypress MB96300 series of 16-bit microcontrollers. Figure 1-1 shows the flow for the setup procedure for the MB96300 series debug environment. The connections for the emulator and each board, as well as the procedures and descriptions for settings on the adapter board are explained in the following chapters. Refer to the SOFTUNE Setup Guide for procedures on launching SOFTUNE and the debugger. Figure 1-1. Flow of Setup Procedures Start of Setup Connect emulator, each board (see P7) Setup the adapter board (see P8) Power up the emulator Power up the target board Launch SOFTUNE (*) Launch the debugger (*) Start debugging *Refer to SOFTUNE Setup Guide. F 2 MC-16FX Family MB96300 Series Setup Guide, Doc. No Rev. *A 4

6 2. Hardware Configuration Figure 2-1 shows the configuration of the MB96300 series debug environment. The debug environment consists of a host PC, emulator (MB ), evaluation chip (MB96V300BRB-ES), adapter board (MB ), header board, and target board (user board). The SOFTUNE integrated development environment must be setup on the host PC. (Refer to the SOFTUNE First Step Guide for setup procedures.) Select and use the header board that matches the chip and package for the device to be used. The model numbers for the header boards with matching device types are listed in Table 2-1. Also note it is necessary to install a socket (NQPACK) for connecting the header board to the target board (user board). Figure 2-1. Configuration of Debug Environment Host PC Oscillator clock Header board Evaluation chip Target board (user board) Emulator Adapter board F 2 MC-16FX Family MB96300 Series Setup Guide, Doc. No Rev. *A 5

7 Hardware Configuration Table 2-1. Debug Environment Parts for Each Device Type Evaluation product Evaluation chip Emulator Adapter board Header board Remarks MB96320 MB96V300BRB-ES MB MB MB LQFP-80 MB96340 MB QFP-100 MB LQFP-100 MB96350 MB LQFP-64 (0.5 mm, mm) MB LQFP-64 (0.65 mm, mm) MB96380 MB FX- 120P-M21 LQFP-120 *The user must also supply a target board (user board), and oscillator clock (crystal oscillator). F 2 MC-16FX Family MB96300 Series Setup Guide, Doc. No Rev. *A 6

8 3. Hardware Setup This chapter explains the setup procedures the MB96300 series debug environment. 3.1 Setting up the emulator and each board Figure 3-1 shows the connections for the emulator and each board. Connect each board shown in Figure 3-1. The included AC adapter must be used to provide power to the emulator. Also, the evaluation chip (MB96V300BRB-ES) must be mounted to the adapter board. Figure 3-1. Connections for the Emulator and Each Board Host PC Connect host PC to emulator External trigger/ program execution General purpose measuring device AC in AC adapter Connect AC adapter Emulator (MB ) Mount evaluation chip (MB96V300BRB-ES) in IC socket Evaluation M C U (MB96V300 BRB-ES) 1 pin Adapter board Adapter board (MB ) Use flat cable (supplied with adapter board) to connect to the header board Flat cable (supplied with adapter board) User system Header board F 2 MC-16FX Family MB96300 Series Setup Guide, Doc. No Rev. *A 7

Hardware Setup 3.2 Jumper settings on the adapter board Jumper pins are provided on the adapter board and must be set according to the operating conditions.

9 Hardware Setup 3.2 Jumper settings on the adapter board Jumper pins are provided on the adapter board and must be set according to the operating conditions. The figure below shows the location for the jumper pins that need to be set. Each jumper pin setting is described in Table 3-1 to Table 3-4. The recommended jumper pin settings are shown highlighted in gray ( ). Set the jumper pins on the adapter board according to the descriptions in the tables. Figure 3-2. Jumper Pin Locations on the Adapter Board X0A, X1A =EML side AVSS_OUT =USR side X0, X1 =EML side AVRH_OUT =USR side Oscillator clock *1 (crystal oscillator) AVRL_OUT =USR side *1 User must supply a crystal oscillator rated for the frequency used in the user system. AVRL_IN = A-B side CLKSEL0, CLKSEL1 =PORT side *2 C =EML side DVDD =USR side RTSX =USR side AVRH_IN = A-B side AVCC_OUT =USR side AVCC_IN =A-B side MD0_SEL, MD1_SEL, MD2_SEL=L side MD0, MD1, MD2 = USR side *2 If a sub clock is to be used, set the jumper on the adapter board to the CLK side, then connect the sub clock to the IC socket for the crystal oscillator. F 2 MC-16FX Family MB96300 Series Setup Guide, Doc. No Rev. *A 8

10 Hardware Setup Table 3-1. Jumper Settings on the Adapter Board (Debug power supply selection) Jumper Setting Description DVDD DBG side Supply DC regulated power supply from connection at UVCC connector (CN7). USR side (default) Supply DVCC power supply from the user system. RSTX DBG side Fix RSTX to H using DC regulated power supply from connection at UVCC connector (CN7). MD2,MD1, MD0 MD2_SEL, MD1_SEL MD0_SEL USR side (default) DBG side USR side (default) H side L side (default) Supply the RTSX signal from the user system. Supply the mode pin signal on the adapter board. Supply the mode pin signal from the user system. These jumpers set the mode pins for the evaluation MCU. These settings are enabled when the MD2-MD0 jumpers are set to the DBG side. Each signal level is set to the output level of the DC regulated power supply connect to the UVCC connector (CN7). Table 3-2. Jumper Settings on the Adapter Board (Short plug settings for clock changeover) X1, X0 X1A, X0A Jumper Setting Description CLKSEL1, CLKSEL0* USR side EML side (default) USR side EML side (default) PORT side (default) CLK side Supply the main clock from the user system Supply the main clock from the crystal oscillator IC socket on the adapter board Supply the sub clock from the user system Supply the sub clock from the crystal oscillator IC socket on the adapter board Use the port/sub clock input pin (P040/X0A, P041/X1A) as a port Use the port/sub clock input pin (P040/X0A, P041/X1A) as the sub clock input pin * If a sub clock is to be used, set the jumper on the adapter board to the CLK side, and then connect the sub clock to the IC socket for the crystal oscillator. F 2 MC-16FX Family MB96300 Series Setup Guide, Doc. No Rev. *A 9

11 Hardware Setup Table 3-3. Jumper Settings on the Adapter Board (Short plug settings for analog power supply changeover Jumper Setting Description AVCC_IN A-B side (default) Select the analog power supply (AVCC) from the user system A-C side B-D side C-D side Select the analog power supply (AVCC), with an RC filter, from the user system Select the analog power supply (VDD) from the UVCC connector Select the analog power supply (VDD), with an RC filter, from the UVCC connector AVCC_OUT USR side (default) Supply the power supply selected by AVCC_IN to the evaluation MCU analog power supply (AVCC) FLT side Add an RC filter to the power selected by AVCC_IN and supply to the evaluation MCU analog power supply (AVCC) AVRH_IN A-B side (default) Select the analog power supply (AVRH) from the user system A-C side B-D side C-D side Select the analog power supply (AVRH), with an RC filter, from the user system Select the analog power supply (UVDD) from the UVCC connector Select the analog power supply (UVDD), with an RC filter, from the UVCC connector AVRH_OUT USR side (default) Supply the power supply selected by AVRH_IN to the evaluation MCU analog power supply (AVRH) FLT side Add an RC filter to the power selected by AVRH_IN and supply to the evaluation MCU analog power supply (AVRH) AVRL_IN A-B side (default) Select the analog power supply (AVRL) from the user system A-C side B-D side C-D side Select the analog power supply (AVRL), with an RC filter, from the user system Select the analog power supply (VDD) from the UVCC connector Select the analog power supply (VDD), with an RC filter, from the UVCC connector. AVRL_OUT USR side (default) Supply the power supply selected by AVRL_IN to the evaluation MCU analog power supply (AVRL) FLT side Add an RC filter to the power selected by AVRL_IN and supply to the evaluation MCU analog power supply (AVRL) AVSS_OUT USR side (default) Connect the analog power supply (AVSS) from the user system to the evaluation MCU analog power supply (AVSS) GND side Connect the GND and evaluation MCU analog power supply (AVSS) Table 3-4. Jumper Settings on the Adapter Board (Short plug settings for C pin supply) Jumper Setting Description C USR side Connect the capacitor on the user system to the C pin on the evaluation MCU EML side (default) Connect the capacitor on the adapter to the C pin on the evaluation MCU Refer to the Instruction Manual for the Adapter MB for details on settings of the adapter board. F 2 MC-16FX Family MB96300 Series Setup Guide, Doc. No Rev. *A 10

Revision History Document Revision History Document Title: F 2 MC-16FX Family MB96300 Series Setup Guide Document Number: 002-06378 Revision Issue Date Origin of Change Description of Change

12 Revision History Document Revision History Document Title: F 2 MC-16FX Family MB96300 Series Setup Guide Document Number: Revision Issue Date Origin of Change Description of Change ** 09/11/2008 KHAS Initial release. *A 05/16/2016 KHAS Migrated Spansion Guide from AN E to Cypress format. F 2 MC-16FX Family MB96300 Series Setup Guide, Doc. No Rev. *A 11

For More Information Please contact your local sales office for additional information about Cypress products and solutions.

For More Information Please contact your local sales office for additional information about Cypress products and solutions. The following document contains information on Cypress products. The document has the series name, product name, and ordering part numbering with the prefix MB. However, Cypress will offer these products