Click Desktop Kit. Click Desktop Kit

Transcription

1 Click Desktop Kit Click Desktop Kit The Click Desktop Kit is a desktop-mounted set that gives you the building blocks necessary to work with your Click modules at your computer, whether you re testing the link on a Click communication device, configuring a Click contact closure card, or developing custom applications on the Click 500. Features Purchase along with desired Click modules for easy development, configuration or testing Professional power pack protects modules, and comes prewired to T-bus and to edge connector slot Eleven-inch DIN rail features five T-bus expansion slots for landing modules One 44-pin edge connector socket allows use with systems involving rack cards Also includes: RS-232 cable connects Click devices to computer Precision screwdriver for control of DIP switches and easy wiring Can be purchased along with Click 500 development kit to provide you with all the equipment needed to develop the Click 500 Click 210 Click 230 Click 201 Click Desktop Kit 8-ft. AC Cord 6-ft. Straight Serial Cable WX

2 Click Desktop Kit Technical Specifications Assembly Components Click desktop stand with 44-pin edge connector socket and 11- inch DIN rail Click power plant DIN rail mounted plug with 120 VAC input power cable Click 210 circuit breaker Click 230 AC surge protector Click 201 AC to DC power converter prewired to T-bus and edge connector slot T-bus 2 T-bus 5 screw terminal blocks (1 left, 1 right) 4 green T-bus connectors (power and communication) 1 gray T-bus connector (power only) Straight-through RS-232 cable Precision screw driver Pelican-brand carrying case Click Desktop Stand Specifications Weight: 1.4 lb (0.64 kg) dimensions: Folded: 12 in. x 5.5 in. x 0.88 in. (30.5 cm x 14 cm x 2.2 cm) Standing: 12 in. x in. x 5 in. (30.5 cm x cm x 12.7 cm) Made of 1/8-in. aluminimum 1 11-in. (28-cm) DIN rail Edge connector socket for inserting rack cards: Dual edge 44-position socket Accommodates 0.62±0.008 in. (1.57±0.2 cm) PC board 3 A rating per contact Cable and Plug Specifications 120 VAC Cable 8 ft. (2.4 m) in length Plug mounts on DIN rail Click 210 Weight: 0.07 lbs. (31.8 g) dimensions: 0.3 in. x 2.5 in. x 3.4 in. (0.08 cm x 6.4 cm x 8.6 cm) Ambient operating temperature: -4 F to 140 F (-20 C to 60 C) Nominal operating voltage: 250 VAC, 65 VDC Nominal current: 0.5 A for Click 210, 2 A for Click , 8 A for Click Ordering Information Click Desktop Kit CLK-DSK ACCESSORIES CLK-500-ADD Click 500 development add-on Wavetronix 78 East 1700 South Provo, UT sales@wavetronix.com Two screw terminals for wiring in and out Configuration Feature Push-button used to reset device after a current interruption Fuse Slow-blow fuse Switching Capacity Switching capacity: 6x IN for nominal currents 0.25 A to 4 A, 8x IN for nominal currents 6 A to 10 A Life Expectancy Life expectancy: 3000 cycles Passes manufacturer s test before shipping Click 230 (see Click datasheet for complete details) Weight: 0.2 lbs. (0.1 kg) dimensions: 0.7 in. X 2.6 in. X 3.5 in. (1.8 cm x 6.6 cm x 8.9 cm) Ambient operating temperature: -40 F to 185 F (-40 C to 85 C) 2

3 Click Desktop Kit Ratings Nominal operating voltage: 120 VAC for Click 230, 230 VAC for Click Nominal current In: 26 A Maximum continuous operating voltage: 150 VAC for Click 230, 253 VAC for Click Maximum discharge current (8/20μS): 10 ka Has eight screw terminal connections: line, neutral and ground for power coming in; line, neutral and ground for power going out; two testing terminals Surge Protection Three-stage surge protection: fast-responding surge-arresting diodes; high-powered current-handling gas discharge tubes; series decoupling elements Passes manufacturer s test before shipping Tested under NEMA TS Click 201 (see Click datasheet for complete details) Weight: 0.46 lbs. (0.21 kg) dimensions: 4.5 in. 3.9 in. 0.9 in. (11.4 cm x 9.9 cm x 2.3 cm) Ambient operating temperature: -29 F to 140 F (-34 C to 60 C) with between 140 F and 165 F (60 C and 74 C) derating Humidity: up to 95% RH Pluggable screw terminals for easy pre-wiring output at -29 F to 140 F (-34 C to 60 C): 1 A At temperatures between 140 F to 165 F (60 C and 74 C), output will decrease at a rate of 2.5% per degree Celsius temperature increase input: VAC at Hz Surge Protection Complies with the applicable standards stated in the IEC Standard for AC input power lines Efficiency Efficiency in converting AC input to DC: 80% or greater UL Listed Listed with UL under UL 508; complies with all applicable UL 508 standards NEMA TS Complies with the applicable standards stated in the NEMA TS Standard Test results available for each of the following tests for the Click 201/202: Shock pulses of 10g, 11 ms half sine wave Vibration of.5 Grms up to 30 Hz 300 V positive/negative pulses applied at one pulse per second at minimum and maximum DC supply voltage Stored at -49ºF (-45ºC) for 24 hours Stored at 185ºF (85ºC) for 24 hours Operation at -29.2ºF (-34ºC) and 10.8 VDC Operation at -29.2ºF (-34ºC) and 26.5 VDC Operation at 165.2ºF (74ºC) and 26.5 VDC Operation at 165.2ºF (74ºC) and 10.8 VDC Device is tested by the manufacturer before shipment Tested under NEMA TS (see Click datasheet for complete details) T-bus 5 screw Terminal Block Specifications imensions: 0.8 in. x 0.7 in. x 0.43 in. (2 cm x 1.7 cm x 1.1 cm) Weight: lbs. (0.39 g) Pitch: 0.15 in (0.38 cm) Comes in left and right end models for correct assembly (this backplate comes with left end model) Nominal current: 8 A Nominal voltage: 160 V Type of connection: screw terminal connection Number of positions: 5 Wire: AWG Passed manufacturer s mechanical, electrical and material tests (see Click datasheet for complete details) 3

4 Click Desktop Kit T-bus Connector Specifications Dimensions: 1.4 in. x 1.2 in. x 0.7 in. (3.5 cm x 3 cm x 1.7 cm) Weight: 0.01 lbs. (4.5 g) Comes in two models: green for data and power, gray for power only Nominal current IN: 8 A Nominal voltage UN: 150 V Passed manufacturer s mechanical, electrical and material tests (see Click datasheet for complete details) RS-232 Cable Specifications Straight-through cable 6 ft. (1.8 m) in length 2 DB-9 connectors, 1 male and 1 female Other Precision flathead screwdriver (2.5 mm) with Click branding 4

5 Click Desktop Kit Click Desktop Kit Bid Specification 1.0 General. This item shall govern the purchase of a hardware kit (HK) equivalent to the Wavetronix Click Desktop Kit. 2.0 Product Description. The HK shall includes the following elements: a desktop stand with DIN rail and 44-pin edge connector; an AC power cable with plug; a circuit breaker equivalent to the Click 210; an AC surge suppresion device equivalent to the Click 230; a DC power supply equivalent to the Click 201; T-bus connectors and end blocks; a straightthrough cable; and a precision screwdriver. 5