2U Congestion Alert Rack Insert for UK

Transcription

1 2U Congestion Alert Rack Insert for UK 2U Congestion Alert Rack Insert for UK The 2U congestion alert rack insert comes fully assembled, wired and ready to be installed in a rack. The rack provides communications, power conversion and surge protection for a SmartSensor HD. Features Comes preassembled on a 2U rack insert for easy installation into existing 19-inch racks Provides convenient, off-the-shelf support for your SmartSensor HD installation Includes terminal blocks, power supply and battery, and surge suppression for the complete rack assembly Included power supply converts AC power to DC; attached battery provides power for up to 30 minutes in case of power outage Provides protection against lightning electrostatic surges on power inputs and on sensor cables Includes trip-free circuit breaker that can be quickly and easily reset after a current interruption Color-coded terminal blocks match colors on Wavetronix cable for foolproof cable landing Preassembled, prewired and tested for first-try functionality Insulation displacement terminal blocks for no-fuss cable termination WX

2 Technical Specifications Assembly Components 1 Click 203 uninterrupted power supply and battery 1 Click A circuit breaker 1 Click 200 surge protector 1 Click VAC AC surge protector 1 T-bus 5-screw terminal block (left end) 2 T-bus connectors (power and communication) 2 end brackets with labels 2 end brackets without labels 3 terminal blocks for AC line input: spring cage to plug spring cage 10 AWG (1 grounded) 12 terminal blocks for cable termination: insulation displacement to plug insulation displacement platform: 2U rack insert 1 5-ft. white RJ-11 patch cable Click 203 Specifications UPS module weight: 1.1 lbs. (0.5 kg) Battery module weight: 1.9 lbs. (0.9 kg) dimensions: 2.7 in. x 3.9 in. x 4.2 in. (6.9 cm x 9.9 cm x 10.7 cm) for each module Ambient operating temperature: 32 F to 212 F (0 C to 40 C) Humidity: up to 95% RH Output current: 2 A Output voltage: between 22.5 and 29.5 VDC (depends on device configuration) Output voltage in buffer mode: between 19.2 and 27.9 VDC (depends on device configuration) Input Voltage Range: 85 to 264 VAC Has pluggable screw terminals, letting you wire input and output before installation Configuration Features UPS module has potentiometer, which adjusts the power output UPS module has buffer time selection dial; it adjusts the length of time that the Click 203 remains on battery power after a power outage before it automatically shuts down UPS has three LEDs: red LED for alarm, yellow LED for battery mode, green LED for power Battery Rechargeable Charges when wired to the power supply module 5 A fuse protects battery in case of a short Ordering Information 2U congestion alert rack insert for UK ACCESSORIES CLK-110 Click 110 rack cards Wavetronix 78 East 1700 South Provo, UT sales@wavetronix.com Efficiency Efficiency when converting AC input to DC: 82% or greater UL Listed Listed with UL under the following standards: UL 508, UL Passes manufacturer s test before shipping (see Click datasheet for complete details) Click 210 Specifications Weight: 0.07 lbs. (31.8 g) dimensions: 0.3 in. x 2.5 in. x 3.4 in. (0.08 cm x 6.4 cm x 8.6 cm) Ambient operating temperature: -4 F to 140 F (-20 C to 60 C) Nominal operating voltage: 250 VAC, 65 VDC Click 210 nominal current: 0.5 A Two screw terminals for wiring in and out Configuration Feature Push-button used to reset device after a current interruption 2

3 Fuse Slow-blow fuse Switching Capacity Switching capacity: 6x IN for nominal currents 0.25 A to 4 A Life Expectancy Life expectancy: 3000 cycles Passes manufacturer s test before shipping (see Click datasheet for complete details) Click 200 Specifications Weight: 0.3 lbs. (0.14 kg) dimensions: 4.5 in. 4 in. 0.9 in. (11.4 cm x 10.2 cm x 2.3 cm) Ambient operating temp: -29 F to 165 F (-34 C to 74 C) Humidity: up to 95% RH Hot-swappable Pluggable screw terminals for easy pre-wiring Other ports: DB-9 connector for RS-232 communication; RJ-11 connector for RS-485 communication; 5-position connector for power and RS-485 to and from the T-bus Three-stage protection Three stages of protection: gas tubes; inductors on the DC power lines and TVS diodes on the communication buses; resettable fuse on the DC power line and varistors on all communication buses DC Protection Complies with the applicable standards stated in the IEC Standard for DC power lines Test results available for the following test conditions: surge voltages ±0.5kVA, 1kVA, 2kVA and 4kVA; common mode (input to ground); differential mode (input to input); 8x20µs waveform; 2 ohm generator impedance; minutelong pause between surges RS-485 Protection Complies with the applicable standards stated in the IEC Standard for communication lines Clamping voltage: 8 VDC Differential clamping voltage: 12 VDC Test results available for the following test conditions: surge voltages ±0.5kVA, 1kVA, 2kVA and 4kVA; common mode (input to ground); differential mode (input to input); 8x20µs waveform; 12 ohm generator impedance; minutelong pause between surges RS-232 with CTS/RTS Protection Complies with the applicable standards stated in the IEC Standard for communication lines. Clamping voltage: 11 VDC Test results available for the following test conditions: surge voltages ±0.5kVA, 1kVA, 2kVA and 4kVA; common mode (input to ground); differential mode (input to input); 8x20µs waveform; 12 ohm generator impedance; minutelong pause between surges Device is tested by the manufacturer before shipment (see Click datasheet for complete details) Click Specifications Weight: 0.2 lbs. (0.1 kg) dimensions: 0.7 in. X 2.6 in. X 3.5 in. (1.8 cm x 6.6 cm x 8.9 cm) Ambient operating temperature: -40 F to 185 F (-40 C to 85 C) Nominal operating voltage: 230 VAC Nominal current In: 26 A Maximum continuous operating voltage: 253 VAC Maximum discharge current (8/20μS): 10 ka Eight screw terminal connections: line, neutral and ground out; line, neutral and ground in; and two testing terminals Surge Protection Three-stage surge protection: fast-responding surge-arresting diodes; high-powered current-handling gas discharge tubes; series decoupling elements (see Click datasheet for complete details) T-bus 5-screw Terminal Block Specifications imensions: 0.8 in. x 0.7 in. x 0.43 in. (2 cm x 1.7 cm x 1.1 cm) 3

4 Weight: lbs. (0.39 g) Pitch: 0.15 in (0.38 cm) Comes in left and right end models for correct assembly (this backplate comes with left end model) Nominal current: 8 A Nominal voltage: 160 V Type of connection: screw terminal connection Number of positions: 5 Wire: AWG Passed manufacturer s mechanical, electrical and material tests (see Click datasheet for complete details) T-bus Connector Specifications Dimensions: 1.4 in. x 1.2 in. x 0.7 in. (3.5 cm x 3 cm x 1.7 cm) Weight: 0.01 lbs. (4.5 g) Comes in two models: green for data and power, gray for power only Nominal current IN: 8 A Nominal voltage UN: 150 V Passed manufacturer s mechanical, electrical and material tests (see Click datasheet for complete details) End Bracket Specifications Weight: 0.01 lbs. (6.2 g) dimensions: 0.37 in. x 2.2 in. x 1.6 in. (0.9 cm x 5.5 cm x 4 cm) Passed manufacturer s mechanical and material tests (see Click datasheet for complete details) SC to Plug SC 10 AWG Terminal Blocks Specifications dimensions: with plug 0.25 in. x 2.2 in. x 2.4 in. (0.6 cm x 5.5 cm x 6 cm); without plug 0.25 in. x 2.2 in. x 1.4 in. (0.6 cm x 5.5 cm x 3.6 cm) Insulating material: PA Insulating material group: I Flammability: UL 94 V0 Number of connections: 2 Pollution degree: 3 Ambient operating temperature: -67 F to 212 F (-55 C to 100 C) Plug connector comes in left, middle and right models for correct assembly Matching end cover protects exposed conductor Nominal current IN: 32 A Nominal voltage UN: 800 V Maximum load current: 32 A Terminal block base connect: spring cage Terminal block plug connect: spring cage Removable plug Wire: AWG Stripping length: 3/8 in. (0.95 cm) Internal cylindrical gage: A3 Color Coding Comes in three different models: gray (standard); green (earth ground); and blue (used to color-code plugs to ensure correct placement) Ground Green block is grounded via metal foot to DIN rail Rated surge voltage: 6 kv Surge voltage category: III Connection in acc. with standard: IEC Passed manufacturer s mechanical, electrical and material tests (see Click datasheet for complete details) IDC to Plug IDC Terminal Blocks Specifications dimensions: with plug: 0.2 in. x 2.1 in. x 2.6 in. (0.5 cm x 5.3 cm x 6.6 cm); without plug 0.2 in. x 2.1 in. x 1.45 in. (0.5 cm x 5.3 cm x 3.7 cm) Insulating material: PA Insulating material group: I Flammability: UL 94 V0 4

5 Pollution degree: 3 Ambient operating temperature: -67 F to 212 F (-55 C to 100 C) Plug connector comes in left, middle and right models for correct assembly Matching end cover protects exposed conductor Nominal current IN: 17.5 A Nominal voltage UN: 500 V Maximum load current: 17.5 A Number of connections: 2 Terminal block base connect: insulation displacement Terminal block plug connect: insulation displacement Removable plug Wire: AWG Ground Green block is grounded via metal foot to DIN rail Rated surge voltage: 6 kv Surge voltage category: III Connection in acc. with standard: IEC Passed manufacturer s mechanical, electrical and material tests (see Click datasheet for complete details) 2U Rack Insert Specifications Material: aluminum Thickness: 0.1 in. (2.54 mm) Fits in 19-inch rack Rack space required: 2U (3.5 in./8.9 cm) dimensions: 9 in. x in. x in. (22.86 cm x 8.81 cm x cm) Number of DIN rails: 5 5

6 2U Congestion Alert Rack Insert for UK Bid Specification 1.0 General. This item shall govern the purchase of a 2U congestion alert rack insert (RI) equivalent to the Wavetronix 2U congestion alert rack insert designed for use in the UK, as part of a system involving a radar presence detector system. 2.0 Product Description. The RI shall be a preassembled 2U rack insert to be installed in a 19-inch rack. The RI shall include the following elements: an uninterrupted power supply and battery equivalent to the Click 203; a circuit breaker equivalent to the Click 210; an AC surge suppresion device equivalent to the Click ; a surge protection device equivalent to the Click 200; T-bus connectors; terminal blocks for sensor cable termination; terminal blocks for AC line input; end blocks for stabilization and spacing; and a 2U rack insert as a mounting platform. 6