Medium Capacity Standard Size Toggles Series S
|
|
|
- Jonas Charles
- 5 years ago
- Views:
Transcription
1 GENERAL SPECIFICATIONS FOR S ~ S9 (Resistive & Inductive Load) Power Level: Shown in the following tables Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: (): 0 milliohms maximum,000 megohms 00V,000V minimum for minute minimum 0,000 operations minimum for SAW, S8AW, S9AW, SAW, S8AW, S9AW 0,000 operations minimum for all other models,000 operations minimum Shown in tables on following pages Materials & Finishes Toggle: Bushing: Case: Case Cover: Movable Contactor: Movable Contacts: Stationary Contacts: Terminals: Brass with chrome plating Brass with chrome plating Phenolic resin Steel with zinc plating Copper with silver plating Silver alloy capped on copper with silver plating Silver alloy capped on copper with silver plating Brass with tin plating for S ~ S9AW; brass with silver plating for S ~ S9AW Environmental Data Operating Temp Range: Sealing: -0 C through +70 C (- F through +8 F) for Splashpro models; -0 C through +70 C (+ F through +8 F) for all other models Splashpro & lever lock panel seal models meet IP7 standard Installation Mounting Torque:.7Nm ( lb in) for single nut on AW & AL models.9nm ( lb in) for double nut on other models Maximum Panel Thickness: Shown beneath panel cutout in switch dimension drawings Soldering Time & Temperature: 0 C or 70 C Standards & Certifications UL Recognized: CSA Certified: Designated with UL recognized symbol beside part numbers on following pages See Supplement Index (page Z) to find UL rating details. UL File No. WOYR.E Add "/U" to end part number to order UL mark on switch. Designated with CSA certified symbol beside part numbers on following pages See Supplement Index (page Z) to find CSA rating details. File No Add "/C" to end part number to order CSA mark on switch. NKK Switches sales@nkkswitches.com Phone (80) Fax (80)
2 SINGLE POLE WITH SOLDER LUG SA ON - NONE OFF A A 0A 8A SA ON - NONE ON - A A 0A 8A SA ON - OFF ON - A A 0A 8A V 0V V PF 0. & (COM) Standard Hardware: AT0 Knurled Nut, AT08 Lockwasher, AT7M Backup Hex Nut. See Accessories & Hardware section. Solder lug terminal hole accommodates one -gauge solid or stranded wire. M P (.) Dia Typ.09.0 (.) Dia.9 (.8) Typ.89 (0.0).8 (.).. (.) (8.0) (7.) (0.0).9 (.7).9..0mm (.8") SA SA does not have terminal. DOUBLE POLE WITH SOLDER LUG SA ON - - NONE OFF A A A 8A SA ON - - NONE ON - - 0A 0A 0A 8A S7A ON - - OFF ON - - 0A 0A 0A 8A 8 V 0V V PF 0. & (COM) Standard Hardware: AT0 Knurled Nut, AT08 Lockwasher, AT7M Backup Hex Nut. See Accessories & Hardware section. Solder lug terminal hole accommodates one -gauge solid or stranded wire. M P (.) Dia Typ.09 (.) Dia.9 (.8) Typ.89 (.).8 (.). (8.).7. (7.) (0.0) (.).0mm (.8") SA SA does not have terminals &. NKK Switches sales@nkkswitches.com Phone (80) Fax (80)
3 SINGLE POLE WITH QUICK CONNECT SF ON - NONE OFF A A 0A 8A SF ON - NONE ON - A A 0A 8A SF ON - OFF ON - A A 0A 8A V 0V V PF 0. & (COM) Standard Hardware: AT0 Face Hex Nut, AT08 Lockwasher, AT7M Backup Hex Nut. See Accessories & Hardware section. M P (7.9). (7.) Typ.9 (.) Dia.9 (.) Typ.0 (0.0).8 (.).. (.) Dia Typ (.) (8.0) (7.) (0.0).9 (9.7).9 (.7)..0mm (.8") SF SF does not have terminal. Pole DOUBLE POLE WITH QUICK CONNECT SF ON - - NONE OFF A A A 8A SF ON - - NONE ON - - 0A 0A 0A 8A S7F ON - - OFF ON - - 0A 0A 0A 8A 8 V 0V V PF 0. & (COM) Standard Hardware: AT0 Face Hex Nut, AT08 Lockwasher, AT7M Backup Hex Nut. See Accessories & Hardware section. M P (7.9). (.) Dia Typ (7.) Typ.9 (.) Dia.9 (8.).7. (7.) (0.0).9 (.8). (.8). (.) Typ.0 SF (.7)..0 (.).8 (.) (.)..0mm (.8") SF SF does not have terminals &. NKK Switches sales@nkkswitches.com Phone (80) Fax (80)
4 SINGLE POLE WITH PANEL SEAL SAW ON - NONE OFF A A 0A 00W SAW ON - NONE ON - A A 0A 00W SAW ON - OFF ON - A A 0A 00W 8 SAW ON - NONE MOM - A A 0A 00W 0 S8AW MOM - OFF MOM - A A 0A 00W S9AW ON - OFF MOM - A A 0A 00W V 0V V & (COM) Standard Hardware: AT0 Face Hex Nut, AT08 Lockwasher, AT7 O-ring. See Accessories & Hardware section. Solder lug terminal hole accommodates one -gauge solid or stranded wire. Contact factory for availability.0" quick connect terminals. (7.0) Dia (.) Dia Typ.09.0 (0.9).9 (.8) Typ.89 (0.0).8 (.).7 Dia. M P (.) Dia.9 (8.0) (7.) (7.).9 (.).9 (.7).9..0mm (.8") SAW SAW model does not have terminal. DOUBLE POLE WITH PANEL SEAL SAW ON - - NONE OFF A A A 00W SAW ON - - NONE ON - - 0A 0A 0A S7AW ON - - OFF ON - - 0A 0A 0A 8 SAW ON - - NONE MOM - - A A 0A 0 S8AW MOM - - OFF MOM - - A A 0A S9AW ON - - OFF MOM - - A A 0A V 0V V & (COM) Standard Hardware: AT0 Face Hex Nut, AT08 Lockwasher, AT7 O-ring. See Accessories & Hardware section. Solder lug terminal hole accommodates one -gauge solid or stranded wire. Contact factory for availability.0" quick connect terminals. (7.0) Dia (.) Dia Typ.09 (0.9).9 (8.).7 Dia. M P (7.) (7.).9 (.).9.0. (.8) Typ.89.0 (.).8 (.).7 (.) Dia.9.0mm (.8") SAW SAW model does not have terminals &. NKK Switches sales@nkkswitches.com Phone (80) Fax (80)
5 SINGLE POLE WITH LOCKING LEVER & PANEL SEAL SAL ON - NONE OFF A A 0A 8A SAL ON - NONE ON - A A 0A 8A SAL ON - OFF ON - A A 0A 8A 8 V 0V V & (COM) Standard Hardware: AT0 Face Hex Nut, AT08 Lockwasher, AT7 O-ring. See Accessories & Hardware section. Solder lug terminal hole accommodates one -gauge solid or stranded wire. (7.) Dia.9 (7.8) Dia.07 (.) Dia Typ.09.0 (.8) Typ.89 (0.0).8 (.). (8.0) (0.7) Dia. (7.) M P.9 (.) (.0).9.7 (.) (7.0).09 (.7).9. (.) Dia.80.0mm (.8") SAL SAL model does not have terminal. DOUBLE POLE WITH LOCKING LEVER & PANEL SEAL SAL ON - - NONE OFF A A A 8A SAL ON - - NONE ON - - 0A 0A 0A 8A S7AL ON - - OFF ON - - 0A 0A 0A 8A 8 V 0V V & (COM) Standard Hardware: AT0 Face Hex Nut, AT08 Lockwasher, AT7 O-ring. See Accessories & Hardware section. Solder lug terminal hole accommodates one -gauge solid or stranded wire. (7.) Dia.9 (7.8) Dia.07 (.) Dia Typ.09 (8.).7 (0.7) Dia. M P (.).9 (.).09 (7.).9 (.0).7 (7.0).0. (.8) Typ.89.0 (.).8 (.). (.) Dia.80.0mm (.8") SAL SAL model does not have terminals &. NKK Switches sales@nkkswitches.com Phone (80) Fax (80)
GENERAL SPECIFICATIONS FOR S1 ~ S29
Medium Capacity Standard Size GENERL SPECIFICTIONS FOR S ~ S9 (Resistive & Inductive Load) Power Level: Shown in the following tables 800--087 Fax: 78-7-70 Other Ratings Contact Resistance: Insulation
Standard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
General Specifications
Series SK General Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ 5V AC for low & medium security; A @ 50V AC for low security Other Ratings Contact Resistance: Insulation
Standard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
Standard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
Switches Unlimited Contact: Fax: GENERAL SPECIFICATIONS
Series HS TS PS 00--0 Fax: --0 Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Indexing: Contact Timing:
Distinctive Characteristics
Distinctive Characteristics Full face, bright LED illumination in choice of red, green, and amber for visible status indication. 9-amp or 6-amp electrical capacity in compact body. Interior shield prevents
TYPICAL SWITCH ORDERING EXAMPLE BARRIER TYPES. R No Barrier B With Barrier CAP COLORS. A Black B Ivory. Red. H Gray INSCRIPTION ORIENTATION
TYPICAL SWITC ORDERING EXAMPLE JW L R C A M L RATINGS TV5 Rated 0A @ 5/50V AC TV8 Rated 6A @ 5/50V AC ARRIER TYPES R No arrier With arrier OUSING COLORS A lack POLES SPST SPDT * DPST DPDT * DPST must have
General Specifications
Series M00 Tipped Toggles Toggles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity
CK Series...F3 16mm & 19mm High Security 3A Power Level Solder Lug Bushing Mount
Contents Keylocks Toggles A Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers CK Series... 6mm & 9mm High Security A Power Level
Distinctive Characteristics
Distinctive Characteristics Low Profile Pushbuttons Series UB Bright, full face, or spot illumination with red, amber, or green single-element LEDs (an integral part of the switch), plus square or rectangular
General Specifications
Series M00 Tipped Toggles Toggles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity
Distinctive Characteristics
Distinctive Characteristics vailable in flat frame and bracketed PC mounting types. Over-center actuator block and plunger design gives crisp actuation with clear indication of circuit status; this design
General Specifications
Series M Slides Rotaries Programmable Illuminated P Pushbuttons eneral Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ 5V AC or A @ 50V AC; 4A @ 0V DC (On-On circuit) & A
General Specifications
Series M2 Process Sealed Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks eneral Specifications Electrical
General Specifications
Series CW Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications CWS CWS Electrical Capacity Power Level:
General Specifications
Series M00 Tipped Rockers & Paddles Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical
General Specifications
Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level: 5A @ 25/250V AC or 5A @ 30V DC Other Ratings Contact Resistance: 0 milliohms
Distinctive Characteristics
Distinctive Characteristics Industry s first molded rocker with TV rating. Designed to handle large inrush current. JWM models certified for TV-5 rating and JWL models for TV-8 rating. Special 5A @ 7V
General Specifications
Series CW Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications CWS CWS CWT
General Specifications
Miniature Rockers Slides Rotaries Programmable Illuminated P Pushbuttons eneral Specifications Electrical Capacity (Resistive Load) Power Level (silver): Logic Level (gold): Logic/Power Level (gold over
General Specifications
Half-Inch Diameter Process Sealed Rotaries Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications Electrical
Distinctive Characteristics
Distinctive Characteristics Top or side actuation permits flexible board design. Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively
Distinctive Characteristics
Distinctive Characteristics Top or side actuation permits fl exible board design. Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively
Process Sealed Rotaries
New Product N-0 NR0 Series Process Sealed Rotaries Subminiature Rotaries with Positive, Distinctive Detent 07-07-7 Series NR0 Subminiature Process Sealed Rotaries General Specifications Electrical apacity
Distinctive Characteristics
istinctive haracteristics Low profile body of MRF model accommodates space limitations required for P mounting. For the MR and MRK bushing mount models, the range of behind panel body depths is. to. (.mm
Distinctive Characteristics
Distinctive Characteristics Low Profile Pushbuttons Series UB Bright or super bright LEDs (an integral part of the switch) of red, amber, green, blue, or white, in full face or spot illumination plus square
Specifications. Description TABLE OF CONTENTS. Page. Description 2. Specifications 2 3. Additional Options 3. How to Order 4 5
TABLE OF CTENTS Page Description Specifications Additional Options How to Order Circuit Descriptions Dimensions 0 Icons into the body of the switch; mounting hardware or special tools are not necessary.
Sensing and Control the Interactive Catalog.
Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to
Contents Rockers. A Series... B4 Process Sealed 0.4VA Logic Level Straight, Right Angle, & Vertical PC
Contents Rockers Toggles Rockers Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons A Series... 4 Process Sealed 0.4VA Logic Level Straight,
Distinctive Characteristics
Ultra-Miniature SMT Slides Series SS3 Distinctive Characteristics Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively indicates circuit
General Specifications
Series General Specifications Electrical Capacity (Resistive Load) Low/Logic Level: m @ V DC maximum for Standard Operating Force models m @ V DC maximum for igh Operating Force models Other Ratings Standard
Distinctive Characteristics
Distinctive Characteristics Subminiature size (/ size of Series M switches) saves space on PC boards. Specifically developed for logic-level applications. Totally sealed body construction prevents contact
D-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
8 Series. Toggle Switches. Introduction. Applications. Features of 8 Series Toggles
8 Series Toggle Switches Introduction The 8 Series Toggles is Copal Electronics' highreliability miniature switch product offering. This product line meets and exceeds all basic international switch standards.
General Specifications
Ultra-Miniature Slides General Specifications Electrical Capacity (Resistive Load) ower Level (silver): 0.A @ 0V DC Logic Level (gold): 0.VA maximum @ 8V AC/DC maximum (Applicable Range 0.mA ~ 0.A @ 0mV
8 Series Pushbutton Switches
8 Series Pushbutton Switches Features. Contacts Silver or gold-plated contacts.. Epoxy resin case UL94V-0 self-extinguishing epoxy. 3. Actuator style Over 30 actuator variations. 4. Insulation between
Distinctive Characteristics
Distinctive Characteristics Ultra-miniature size allows high density mounting, and extremely light weight of 0. gram makes these switches ideal for handheld equipment. Totally sealed body construction
Distinctive Characteristics
Low Profile Process Sealed Tactiles Series J Distinctive Characteristics Special bracket for right angle mounting provides added design variations. igher operating force type provides more pronounced operating
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 100 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
General Specifications
Series Process Sealed Subminiature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity
The Custom Interconnect Leader
SC Series.337.307.040.003.085.194 MIN FLARE TO MEET GAGE TEST.276 MIN.549.781 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR:
6mm 3VA DC Power Level or 0.4VA Logic Level Straight PC PCB Mount. 6mm SMT 3VA DC Power Level & 0.4VA Logic Level Gull Wing Terminals Upright Mount
Contents Tactiles C Series... mm Process Sealed m Low/Logic Level PC Mount C Series...8 mm SMT Process Sealed m Low/Logic Level Gull Wing Terminals Upright Mount HP Series... mm V DC Power Level or.v Logic
SERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY. B1 Ultra Small 2A 100,000 N/A SPST, SPDT
SWITCH SELECTION GUIDE Basic Switches SERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY (Resistive) B1 Ultra Small 2A 100,000 N/A SPST, SPDT B1-5 Levers 2A 1,000,000 N/A SPST, SPDT B2 Subminiature
MULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting Selector switch positions up to 16 Switching torque up to 6 Ncm Gold plated contacts Rugged design
SINGLE BARREL 1/2 9/16 3/4 7/ /2 1/2 5/8 11/ /8 1 1 /4 1 9 / /4 SINGLE BARREL NEMA TANG DRILLING CTN /8 1 3 /16 CTN 71055
PAGE MECHANICAL LUGS ALUMINUM SAL SERIES AL OR CU DIMENSIONS (IN) MAX. MIN. L W H BOLT B SINGLE BARREL 00 00 00 0 00 00 00 00 00 00 000 *A- *A- *A-/0 A-/0 A-0 A-00 A-0 A-00 A-00 A-00 A-000 # STR /0 STR
Terminals, Lugs, and Fasteners
Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying
General Specifications
Series BB Process Sealed Subminiature Antistatic Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA maximum @ 8V A/D maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V)
MULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting 10, 12 and 16 selector switch positions Switching torque up to 6 Ncm Gold plated contacts Rugged
v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc.
v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc. JAE JL10 Series Circular Waterproof Connector Application Examples Industrial machineries Servo
General Specifications
Miniature Rockers Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical Capacity (Resistive Load) Power Level (silver): Logic Level (gold):
Item No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
General Specifications
Series M Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks eneral Specifications Electrical Capacity
General Specifications
General Specifications Electrical apacity (Resistive Load) Low/Logic Level: m @ V D Other Ratings ontact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal
Series 47A: Miniature Rocker and Paddle Switches
SERIES 7A Miniature and Paddle Switches FEATURES Save Space and Weight,, PDT and PDT Circuitry Choice of Actuators and Terminations UL Recoginized DIP Switches S In inches (and millimeters) SP SP SP SP
Series 47A: Miniature Rocker and Paddle
Series 47A: Miniature Rocker and Paddle SERIES 47A Miniature Rocker and Paddle Switches FEATURES Save Space and Weight,, PDT and 4PDT Circuitry Choice of Actuators and Terminations UL Recoginized S in
Male connector; 6-pole; pin spacing 3.5 mm / in; 100% protected against mismating
Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Item Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Marking Business data Supplier
Single Pole Circuit Breakers 83 Multi-Pole Circuit Breakers 84 APGHX/UPGHX Breakers 86 APGX/UPGX Breakers 87 APGN/UPGN Breakers 88 APG/UPG Handles
Single Pole Circuit Breakers 83 Multi-Pole Circuit Breakers 84 APGHX/UPGHX Breakers 86 APGX/UPGX Breakers 87 APGN/UPGN Breakers 88 APG/UPG Handles and Actuators 89 IPG Breakers 90 Configurations 9 Operating
Multiple Density Solder Eyelet
Series 400 Multiple Density Solder Eyelet FEATURES For use in cable-to-cable and cable-to-panel applications. Designed for medium duty. prongs are.50" (6.35mm) wide and.055" (1.40mm) thick. contacts have
MCX Connectors. Alphabetical Index. Johnson Components P.O. Box 1732 Waseca, MN Fax:
MCX Connectors Alphabetical Index 133-3701-201 3 133-3701-206 3 133-3701-211 3 133-3701-216 3 133-3701-221 3 133-3701-226 3 133-3701-231 4 133-3701-236 4 133-3701-301 5 133-3701-306 5 133-3701-311 5 133-3701-316
General Specifications
Series GT Process Sealed Ultra-Miniature SMT Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical
Time Delay Values (E-Series)
Time Delay Values (ESeries) AC Instantaneous 00 0 INSTANTANEOUS CURVE NO. 20 00 0 DC D.C. INSTANTANEOUS CURVE NO. 0 0. 0..0.0.00 200 300 400 500 700 800 900 0 200.00 200 300 400 500 700 800 900 0 200 Short
INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
TNC Connectors Flexible Cable... 3 In-Series Adapters... 4 Specifications... 2 RF Adapter Kit Adapters... 6 N Connectors Panel Mount and In-Series Adapters... 10 Flexible Cable... 8 Specifications... 7
Quick-connect terminals (#110)
Sealed Subminiature Basic Switch D2SW-P Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealed to IEC IP67. Switch rating of 2 at 250 VC possible with a single-leaf
CROWN LINE Power Bus Bar Distribution System
COWN LINE Power Bus Bar Distribution System COWN LINE Power Bus Bar Distribution System The pluggable bus bar system Currents up to 300 Amps Up to 2 meters in length Pluggable breakers VDE finger proof
ALLEN BRADLEY RELAY Bulletin 700-HF
ALLEN BRADLEY RELAY Bulletin 700-HF Contact Rating DPDT, 3PDT, 4PDT Plug-in Quick Connect Solder Terminals Options: LED, Push-to-Test Operator DEMENSIONS: Bulletin 700-HF Relay (DPDT) Bulletin 700-HF (3PDT)
D2SW-3L1HS D2SW-01L1HS
Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures
CONNECTORS & RECEPTACLES
TINI Q-G MINIATURE CONNECTORS DESIGN FEATURES STYLE Streamlined, miniaturized with nickel-plated metal and contrasting black plastic parts. Designed for light weight and unobtrusiveness. Also available
Introduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
PUSH BUTTON SWITCHES(Momentary)
PUSH BUTTON SWITCHES(Momentary) Series - 7 DESCRIPTION Integral Series7 Push Button Switches is a unique design wherein the operative portion is separate from the Switch Element.The Basic Switch Series
Sales: Technical: Fax:
DATA SHEET Weatherproof Order code Manufacturer code Description 23-2650 PX0410/02S/5560 2 WAY FREE SOCKET MICRO BUCCANNEER 23-2652 PX0410/03S/5560 3 WAY FREE SOCKET MICRO BUCCANNEER (RC) 23-2654 PX0410/04S/4550
General Purpose Phenolic
Switch Features 8 Contact Ratings DC ratings optional Standard or light force versions available High temperature versions optional Agency approved long life versions optional Electrical Ratings and Operating
Selection guide - Section B1 «I» range
Selection guide - Section «I» range Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1 NPN 1 1 Maximum current 5A 28VDC
General Specifications
Series F Ultra-Thin Process Sealed Tactiles General Specifications Electrical Capacity (Resistive Load) Low/Logic Level: m @ V DC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength:
APG/UPG/IPG Series Existing Designs Only APG/UPG/IPG
APG/UPG/IPG Series Existing Designs Only APG/UPG/IPG APG/UPG/IPG Series Hydraulic Magnetic Circuit Protectors INTRODUCTION IMPORTANT NOTICE: The APG/UPG is a legacy product and no new design-in orders
Terminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks
Series A2000, LP2000 & C2000 Single Row Terminal A20510807WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* C2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG CU Screw Size:
Terminal Blocks - Single Row. Series A3000, LP3000 & CB3000 Single Row Terminal Blocks
Series A3000, LP3000 & CB3000 Single Row Terminal SPECIFICATIONS Rating: A3: 30A, 600V* #12-22 AWG LP3: 30A, 150V #12-22 AWG CB3: 30A, 600V #12-22 AWG Wire Range: #12-22 AWG CU Center Spacing: 0.437 or
Male connector; with fixing flanges; 6-pole; pin spacing 5.08 mm / 0.2 in; for screw or similar mounting types; for parallel or perpendicular mounting
Male connector; with fixing flanges; 6-pole; pin spacing 508 mm / 02 in; for screw or similar mounting types; for parallel or perpendicular mounting Item No: 231-636/019-000 Male connector; with fixing
Terminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks. Terminal Blocks: Single Row. EuroMag Series.
Series A2000, LP2000 & C2000 Terminal locks A201108WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* C2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG Cu Screw Size: #6-32
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. HIGH POWER CONNECTORS Panel Mounts and Cord Plugs HPC Series Switchcraft
Applications. Introduction
Introduction The 8 Series Toggles is Copal Electronics' highreliability miniature switch product offering. This product line meets and exceeds all basic international switch standards. With 8 toggle options,
Terminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB
Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept Insert molded base and improved case-to-base seal provides enhanced resistance to
1 POLE 8 A (MEDIUM LOAD CONTROL)
FUJITSU TAKAMISAWA COMPONENT CATALOG POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) FEATURES UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (130 C) insulation 1 form A (SPST-NO) or 1 form
USB Buccaneer BUCCANEER
Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling USB adaptor Sealing Cap Clip Standard USB O ring maintains IP68 seal at interface Panel gasket
PRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
Filtered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
Technical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
0.4VA Logic Level Straight, Right Angle & Vertical PC. Extended & Piano Actuated DIP Slides 24V DC Straight PC
Contents Slides AS Series... 0.VA Logic Level Straight, Right Angle & Vertical PC CS Series... 0 A Power Level Straight PC PCB Mount FS Series... igh Frequency 90Mz to Gz Straight PC JS0, JS0 Series...
General Specifications
eries J0 & J0 Ultra-Miniature lide & Piano DIP General pecifications Electrical Capacity (Resistive Load) witching Rating: ma @ V DC Nonswitching Rating: 0.A @ 0V DC Other Ratings Contact Resistance: Insulation
Limit Switches E47 Precision Switches
June 09 E7 Precision Switches PG.0C.0.T.E 1 E7 Precision The Cost-Effective Solution for Highly Accurate Switching Applications Contents Overview...................... 1 Model Selection, Basic Switches................
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
400 Series Buccaneer BUCCANEER FOR POWER. IP68 rating tested at 1.054kg/sq cm (15lb/sq in) 10m depth for 2 weeks
IP68 rating tested at 1.054kg/sq cm (15lb/sq in) m depth for 2 weeks IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k 2 and 3 pole -, 250V rating 4, 6 and 8 pole -, 125V rating and 12 pole -, 50V
Distinctive Characteristics
Tilt Switch Series DS Distinctive Characteristics DSA Environmentally friendly, contains no mercury. High contact reliability due to sealed body. The switch is triggered when tilted beyond ±10 of the horizontal.
Standard Buccaneer BUCCANEER FOR POWER
IP8 rating tested at 1.05kg/sq cm (15lb/sq in) 10m depth for weeks and.8kg/sq cm (10lb/sq in) 100m depth for hours IPK, Tested in accordance with DIN 0050/Part IPkk Water and dustproof to IP8 when mated,,,,,,
Item No.: /
Angled female connector; with snap-in mounting foot; 3-pole; pin spacing 5 mm / 097 in; 00% protected against mismating; for panel mounting; Plate thickness 06x2 mm; Fixing holes 35 mm Ø Item Angled female
Commercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever
Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,
Amphenol. The Company. What is a Filtered Connector? Benefits. Choosing the Right Capacitance for Your Filter Connector
Amphenol The Company Amphenol Canada Corp. a subsidiary of Amphenol Corporation, is an international leader in the manufacture of Filtered Connectors and Specialty Interconnect Devices, and has been pioneering
Actuator Terminal Model
Sealed Snap ction Switch D2VW Watertight Miniature Snap ction Switch High-quality watertight, high-precision miniature Snap ction switch. Switch Body meets IP67 requirements Use of epoxy resin assures
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used