Silicon 5 Watt Zener Diodes
|
|
- Kimberly Ray
- 5 years ago
- Views:
Transcription
1 Compliant Silicon 5 Watt Zener Diodes DESCRIPTION The 1N5334Be3 through IN5388Be3 JEDEC registered series of axial-leaded 5.0 watt Zeners provides a voltage selection of 3.6 V to 200 V with different tolerances as indentified by a suffix letter on a part number. These plastic encapsulated Zeners have a moisture classification of level 1 with no dry pack required. They may be operated at high maximum dc currents with adequate heat sinking due to their comparatively low thermal resistance design. DO-201AE comes in tape and reel only, TR7 and TR13. Important: For the latest information, visit our website FEATURES JEDEC registered 1N5336 through 1N5388 numbers Zener voltage available 3.6 volts to 200 volts Plus/minus 10%, 5% and 2% voltage tolerances available. (See Part Nomenclature for all available options.) Low inductance RoHS compliant Plastic package classification 94V-0 APPLICATIONS / BENEFITS D0-201AE Package Also available in: T-18 Package (leaded alternative) 1N5333B 1N5388B Built-in strain relief Flexible axial lead mounting terminals Minimal changes of voltage vs current Regulates voltage over broad operating current and temperature ranges MAXIMUM 25 ºC unless otherwise stated Parameters/Test Conditions Symbol Value Unit Junction and Storage Temperature T J and T STG -65 to +150 ºC Thermal Resistance Junction-to-Lead (1) R ӨJL 25 o C/W Thermal Resistance Junction-to-Ambient (2) R ӨJA 85 o C/W DC Power T L=75 o C, measured at zero P D 5 W lead length. Derate above 75 o C (3) Solder 10 s T SP 260 o C Notes: 1. At 3/8 (10 mm) lead length from body. 2. Mounted on 100 mm 2 copper pads to each terminal. MSC Lawrence 6 Lake Street, Lawrence, MA Tel: or (978) Fax: (978) MSC Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) Fax: +353 (0) Website: RF01117, Rev. B (9/23/13) 2013 Microsemi Corporation Page 1 of 5
2 MECHANICAL and PACKAGING CASE: JEDEC DO-201AE molded plastic body in compliance with specification 94V-0 TERMINALS: RoHS compliant matte/tin plated axial leads. Solderable per MIL-STD-750, method MARKING: Part number POLARITY: Cathode indicated by band. (Diode to be operated with the banded end positive with respect to the opposite end.) TAPE & REEL option: Seven and thirteen inch reel sizes (add TR suffix to part number, TR7 or TR13, e.g. 1N5352Be3/TR13). Consult factory for quantities. WEIGHT: Approximately grams See Package Dimensions on last page. PART NOMENCLATURE 1N5336 B e3 Type number (see Electrical Characteristics table) RoHS Compliant Tolerance A = 10% B = 5% C = 2% SYMBOLS & DEFINITIONS Symbol Definition α VZ Temperature Coefficient of Regulator Voltage: The change in regulator voltage divided by the change in temperature that caused it expressed in %/C or mv/ C. I R Reverse Current: The dc current flowing from the external circuit into the cathode terminal at the specified voltage V R. I Z, I ZT, I ZK Regulator Current: The dc regulator current (I Z), at a specified test point (I ZT), near breakdown knee (I ZK). I ZSM Reverse Surge Current, Nonrepetitive Peak: The peak reverse current in the breakdown region including all nonrepetitive transient currents but excluding all repetitive transients (also known as maximum Zener surge current). P D Steady-State Power Dissipation: The dc power resulting from the product of V Z x I Z. V R Reverse Voltage: A positive dc cathode-anode voltage below the breakdown region. V Z Zener Voltage: The Zener voltage the device will exhibit at a specified current (I Z) in its breakdown region. Z Z or Z ZK Regulator Impedance: The small signal impedance of the diode when biased to operate in its breakdown region with I ZT applied at I Z or I ZK respectively. This has also been known as Zener or dynamic impedance (Z ZT or Z ZK). RF01117, Rev. B (9/23/13) 2013 Microsemi Corporation Page 2 of 5
3 PART NUMBER ELECTRICAL T A = 25 o C unless otherwise noted Nominal Zener Voltage Maximum Zener Test Current Maximum Zener Impedance Maximum Leakage Current V I ZT I ZT Z I ZT Z I ZK I V R Nom V Min V Max V ma Ω Ω ma µa V 1N5334Be N5335Be N5336Be N5337Be N5338Be N5339Be N5340Be N5341Be N5342Be N5343Be N5344Be N5345Be N5346Be N5347Be N5348Be N5349Be N5350Be N5351Be N5352Be N5353Be N5354Be N5355Be N5356Be N5357Be N5358Be N5359Be N5360Be N5361Be N5362Be N5363Be N5364Be N5365Be N5366Be N5367Be N5368Be N5369Be N5370Be N5371Be N5372Be N5373Be N5374Be N5375Be N5376Be N5377Be N5378Be N5379Be N5380Be N5381Be N5382Be N5383Be N5384Be N5385Be N5386Be N5387Be N5388Be RF01117, Rev. B (9/23/13) 2013 Microsemi Corporation Page 3 of 5
4 GRAPHS Pd, MAXIMUM POWER DISSIPATION (Watts) T A on FR4 PC board T L T L, LEAD TEMPERATURE ( o C) 3/8 from body or T A AMBIENT TEMPERATURE on FR4 PC Board Figure 1 Power temperature Derating Curve V Z, ZENER I ZT (Volts) Figure 2 V Z Temperature Coefficient IZSM, PEAK SURGE CURRENT (Amps) αvz, TEMPERATURE COEFFICIENT IZT IZ, ZENER CURRENT (ma) Figure 3 Peak Surge Current vs. Pulse Width Figure 4 Zener Voltage vs Zener Current V Z = 11 through 39 Volts RF01117, Rev. B (9/23/13) 2013 Microsemi Corporation Page 4 of 5
5 PACKAGE DIMENSIONS Dimensions Ltr Inch Millimeters Min Max Min Max LL BL BD LD RF01117, Rev. B (9/23/13) 2013 Microsemi Corporation Page 5 of 5
500 mw AXIAL-LEADED ZENER DIODES
Available on commercial versions 0 mw AXIAL-LEADED ZENER DIODES DESCRIPTION Screening in reference to MIL-PRF-190 available The series of 0.5 watt Zener voltage regulators provides a selection from 1.8
More information500 mw SURFACE MOUNT ZENER DIODES
Available on commercial versions 0 mw SURFACE MOUNT ZENER DIODES DESCRIPTION Screening in reference to MIL-PRF-190 available The 1N4678UR-1 thru 1N4717UR-1 series of 0.5 watt glass surface mount DO-213AA
More information500 W, Bidirectional Low Capacitance TVS Array
Available 500 W, Bidirectional Low Capacitance TVS Array DESCRIPTION This Transient Voltage Suppressor (TVS) is assembled in a QFN-143 package which has the same pinout and footprint as the SOT-143 package.
More informationMCC. Revision: /06/09 1N5338B THRU 1N5369B
Features Zener Voltage From 5.V to 5V Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 For Available Tolerances See Note Marking : Cathode band and type number Maximum Ratings:
More informationELECTROSÓN. 1N53 Series. 5 Watt Surmetic 40 Zener Voltage Regulators
5 Watt Surmetic 40 Zener Voltage Regulators This is a complete series of 5 Watt Zener diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon oxide
More informationtechnický list 1N5333B through 1N5388B 5 Watt Surmetic 40 Silicon Zener Diodes TECHNICAL DATA str 1
Dodavatel: GM electronic, spol. s r.o., Křižíkova 77, 86 Praha 8 zákaznická linka: 84 6 7 technický list TECHNICAL DATA Watt Surmetic 4 Silicon Zener Diodes This is a complete series of Watt Zener Diodes
More informationZ1SMA4736A Z1SMA4757A
1W Surface Mount Zener Diodes Features For surface mounted applications in order to optimize board space Built-in strain relief Glass passivated junction Low inductance High temperature soldering guaranteed:
More informationSurface Mount Silicon Zener Diodes
FEATURES CREAT BY ART - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Low inductance - Typical IR less than 0.5μA above 11V - ESD Rating of
More informationMCC SMA2EZ5.1D5 THRU SMA2EZ75D5. Features. 2 W Glass Passivated Junction Silicon Zener Diode Volts.
Features Mechanical Data TERMINALS : Solder plated, solderable per MIL-STD-7, method 6 POLARITY : Color band denotes positive end (cathode) omponents 76 Marilla Street Chatsworth!"# $%!"# Lead Free Finish/Rohs
More informationMCC. Revision: E 2014/02/26 1N5338B THRU 1N5388B. Features. 5 Watt Zener Diode 5.1 to 200 Volts. Maximum Ratings:
Features Zener Voltage From 5.V to 00V Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level Lead Free Finish/RoHS Compliant (Note) ("P"Suffix designates Compliant. See ordering information)
More informationCZRB5338B-HF Thru. CZRB5388B-HF Voltage: 5.1V to 200V Power: 5 W RoHS Device Halogen Free
CZRB5338B-HF Thru. CZRB5388B-HF Voltage: 5.1V to 200V Power: 5 W RoHS Device Halogen Free Features - Glass passivated chip - Low leakage - Built-in strain relief - Low inductance - High peak reverse power
More information1N47- Series DO-41. Mechanical Data. Page <1> 18/07/08 V1.1
Features: Low profile package. Built-in strain relief. Glass passivated junction. Low inductance. Typical I R less than 5.0µA above 11V. High temperature soldering guaranteed: 260 C/10 seconds at terminals
More information2M6.8Z - 2M200Z Taiwan Semiconductor
2W, 6.8V - 200V Glass Passivated Junction Silicon Zener Diodes FEATURES - Glass passivated chip junction - Typical I R less than μa - Compliant to RoHS Directive 20/65/EU and in accordance to WEEE 2002/96/EC
More informationBZD17C SERIES Taiwan Semiconductor
0.8W, 11V - 220V Voltage Regulator Diodes FEATURES - Silicon zener diodes - Low profile surface-mount package - Zener and surge current specification - Low leakage current - Excellent stability - Compliant
More informationZener Voltage Regulators
Zener Voltage Regulators 200 mw SOD 323 Surface Mount This series of Zener diodes is packaged in a SOD 323 surface mount package that has a power dissipation of 200 mw. They are designed to provide voltage
More informationM3Z2V4~M3Z75V ZENER DIODES 200mW ZENER VOLTAGE REGULATORS
DESCRIPTION This series of Zener Diodes is packaged in a SOD-323 surface mount package that has a power dissipation of 200mW. They are designed to provide voltage regulation protection and are especially
More informationMPLAD36KP14A MPLAD36KP400CA
Available Surface Mount 36,000 Watt Transient Voltage Suppressor DESCRIPTION These high power 36 kw rated transient voltage suppressors in a surface mount package are provided with design features to minimize
More informationMPLAD18KP7.0A MPLAD18KP200CA
Available Surface Mount 18,000 Watt Transient Voltage Suppressor DESCRIPTION These high power 18 kw rated transient voltage suppressors in a surface mount package are provided with design features to minimize
More informationACZRC5340B-G Thru. ACZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device
CZRC5340B-G Thru. CZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device Features - Glass passivated chip. - Low leakage. - Built-in strain relief. - Low inductance. - High peak reverse power
More information500mW 5% Zener Diodes
MMSZ522B - MMSZ5262B 500mW 5% Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V VZ Tolerance Selection of ± 5% Surface device type mountin Compliant to RoHS directive 20/65/EU and in
More information1N5333B Series. 5 Watt Surmetic 40 Zener Voltage Regulators
Preferred Device Watt Surmetic 40 Zener Voltage Regulators This is a complete series of Watt Zener diodes with tight limits and better operating characteristics that reflect the superior capabilities of
More informationSZAF5.1A~SZAF220A ZENER DIODE 1.5W
DESCRIPTION The are available in SMAF Package ORDERING INFORMATION Package Type Part Number SZAF5.1A SZAF36A SZAF5.6A SZAF39A SZAF6.2A SZAF43A SZAF6.8A SZAF47A SZAF7.5A SZAF51A SZAF8.2A SZAF56A SZAF9.1A
More informationCHENMKO ENTERPRISE CO.,LTD
CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT ZENER SILICON PLANAR POWER ZENER DIODES VOLTAGE RANGE.V TO 9V MMPZBGP THRU MMPZBGP FEATURE * High temperature soldering type. * ESD rating of class (> kv) per human
More informationMCC 2EZ5.1D5 THRU 2EZ75D5. Features Glass Passivation Junction. 2 W Glass Passivated Junction Silicon Zener Diode 5.
omponents 76 Marilla Street Chatsworth!"# $%!"# EZ.D THRU EZ7D Features Glass Passivation Junction Lead Free Finish/RoHS Compliant (Note C) ("P"Suffix designates Compliant. See ordering information) Excellent
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Surface mounting device (SMD) type Moisture sensitivity level: level, per J-STD-020
More informationP1SMA5914-AU ~ 1SMA5945-AU Series
SILICON ZENER DIODE oltage 3.6~68 Power 1.5 W Features Silicon planar Zener diode Low profile surface-mount package Low leakage current Excellent stability High temperature soldering: 260 o C/ seconds
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V V Z tolerance selection of ± 5% Moisture sensitivity level: level, per J-STD-020 Compliant to RoHS directive
More information500mW, 2% Tolerance Zener Diodes
500mW, 2% Tolerance Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 2% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC Halogen-free
More information500mW 5% Zener Diodes
5mW 5% Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 36V VZ Tolerance Selection of ± 5% Surface device type mountin Compliant to RoHS directive 211/65/EU and in accordance to WEEE 22/96/EC
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide Zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC
More informationSEMICONDUCTOR GENERAL DATA
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 0 mw DO-35 Glass Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN THIS GROUP 0 Milliwatt Hermetically Sealed Glass Silicon Zener Diodes Specification
More information200mW, 2% Tolerance Zener Diodes
200mW, 2% Tolerance Zener Diodes FEATURES Wide zener voltage range selection: 3.6V to 36V V Z tolerance selection of ± 2% Moisture sensitivity level: level 1, per J-STD-020 Compliant to RoHS directive
More information500mW, 2% Tolerance SMD Zener Diode
500mW, 2% Tolerance SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 75V - Surface mount device type - Moisture sensitivity level - Pb free and RoHS compliant - V Z Tolerance Selection
More informationSurface Mount 18,000 W Transient Voltage Suppressor
MPLAD18KP7.0A MPLAD18KP200CA Datasheet Surface Mount 18,000 W Transient Voltage Suppressor Released June 2017 Contents 1 Revision History... 1 1.1 Revision 1.0... 1 2 Product Overview... 2 2.1 Features...
More informationContinental Device India Limited
5W AXIAL LEAD ZENER DIODES Axial Lead Plastic Package Features 1). Silicon Planar Power Zener Diodes. 2). For use in Stabillizing and Clipping Circuits with High Power Rating. 3). Standard Zener Voltage
More informationBAT42W/BAT43W SURFACE MOUNT SCHOTTKY BARRIER DIODE
Features: Low Turn-on Voltage Fast Switching PN Junction Guard Ring Transient and ESD Protection Designed for Surface Mount Application Plastic Material UL Recognition Flammability Classification 94V-O
More informationSurface-Mount 36,000 W Transient Voltage Suppressor
Surface-Mount 36,000 W Transient Voltage Suppressor 1 Product Overview These high-power, 36 kw rated transient voltage suppressors in a surface-mount package are provided with design features to minimize
More informationSmall Signal Zener Diodes
MMSZ22 to MMSZ267 Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 3.3 to 7 V Test current I ZT 1.7 to 2 ma V Z specification Thermal equilibrium Int. construction
More informationPart Number Compliance Case Packaging (Type Number)-7* Commercial SOD323 3,000/Tape & Reel
SURFACE MOUNT PRECISION ZENER DIODE Features Very Sharp Breakdown Characteristics Very Tight Tolerance on V Z Ideally Suited for Automated Assembly Processes Very Low Leakage Current Totally Lead-Free
More informationThe Powermite Family. Contents. Introduction. Outperforms Conventional SMT
The Powermite Family Introduction Powermite is Microsemi s patented low-profile architecture for packaging surface mount devices with the industry's highest power density in the smallest possible footprint.
More informationMM3ZxxxT1G Series, SZMM3ZxxxT1G Series. Zener Voltage Regulators. 300 mw SOD 323 Surface Mount
MM3ZxxxT1G Series, SZMM3ZxxxT1G Series Zener Voltage Regulators 3 mw Surface Mount This series of Zener diodes is packaged in a surface mount package that has a power dissipation of 3 mw. They are designed
More information2 Anode. Parameter Symbol Value Units. Max Reverse Leakage Current V IZT IZT IZK VR Nom. V Min. V Max.
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4~33 Volt POWER 25 mwatt FEATURES.42(.5).37(.95) Planar Die construction 25mW Power Dissipation Zener Voltages from 2.4~ Ideally Suited for Automated Assembly
More informationSEMICONDUCTOR GENERAL DATA
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 5 mw SOT- Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN THIS GROUP Zener Voltage Regulator Diodes Manufacturing Locations: WAFER FAB: Phoenix,
More information1N4728A-G SERIES SILICON ZENER DIODE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS FEATURES MECHANICAL DATA
SILICON ZENER DIODE VOLTAGE 3.3 to 75 Volt POWER 1 Watt FEATURES Low inductance High temperature soldering : 260 C /10 seconds at terminals Glass package has Underwriters Laboratory Flammability Classification
More informationZener Voltage Regulators
Zener Voltage Regulators 200 mw SOD-323 Surface Mount This series of Zener diodes is packaged in a SOD 323 surface mount package that has a power dissipation of 200 mw. They are designed to provide voltage
More informationMMSZ5221B-AU~MMSZ5262B-AU
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 51 Volt POWER 500 mwatt FEATURES 0.154(3.90) 0.141(3.60) Planar Die construction 500mW Power Dissipation Ideally Suited for Automated Assembly Processes
More informationMM3ZxxxST1G Series, SZMM3ZxxxST1G Series. Zener Voltage Regulators. 300 mw SOD 323 Surface Mount Tight Tolerance Portfolio
MM3ZxxxST1G Series, SZMM3ZxxxST1G Series Zener Voltage Regulators 3 mw Surface Mount Tight Tolerance Portfolio This series of Zener diodes is packaged in a surface mount package that has a power dissipation
More informationBZT52-C2V4S SERIES SURFACE MOUNT SILICON ZENER DIODES FEATURES MECHANICAL DATA
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 75 Volt POWER 200 mwatt FEATURES Planar Die construction 200mW Power Dissipation Zener Voltages from 2.4~75V 0.078(1.95) 0.068(1.75) Ideally Suited for
More informationMolded plastic body over glass passivated junction Plated axial leads, solderable per MIL-STD-750, Method 2026
T6L Features Stand-off voltage from 5.0 to 250 volts Glass passivated junction 5000W Peak Pulse Power capability on 10/1000μs waveform repetition rate(duty cycle): 0.05% Fast response time: typically less
More informationSOD123F (Type B) Top View. Part Number Compliance Case Packaging (Type Number)-7* AEC-Q101 SOD123F (Type B) 3,000/Tape & Reel
SURFACE MOUNT ZENER DIODE Features Flat Lead Package Design for Low Profile and High Power Dissipation Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note
More informationBZT52-B2V4~BZT52-B75 SURFACE MOUNT SILICON ZENER DIODES FEATURES MECHANICAL DATA
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 75 Volt POWER 4 mwatt FEATURES Planar Die construction 4mW Power Dissipation.154(3.9).141(3.6).1(2.8).98(2.5) Zener Voltages from 2.4~75V Ideally Suited
More informationSurface Mount Zener Diode
Surface Mount Zener Diode FEATURES - Zener voltages from : 2.4V - 39V - Planar die construction - Ideally suited for automated assembly processes - Moisture sensitivity : Level 1 per J-STD-2 MECHANICAL
More informationP6KE6.8A - 600CA. 600W Transient Voltage Suppressor. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise) DO-15
Features Glass passivated chip junction 600W peak pulse power capability on 10/1000μs waveform repetition rate(duty cycle): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR Min. 600W
More informationSOD123. Top View. Date Code Key Year Code A B C D E H I J K L
SURFACE MOUNT ZENER DIODE Features Mechanical Data Planar Die Construction 5mW Power Dissipation General Purpose, Medium Current Ideally Suited for Automated Assembly Processes Totally Lead-Free & Fully
More informationBZT52-B2V4S SERIES SURFACE MOUNT SILICON ZENER DIODES FEATURES MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 75 Volt POWER 200 mwatt FEATURES Planar Die construction 200mW Power Dissipation Zener Voltages from 2.4~75V Ideally Suited for Automated Assembly Processes
More informationVoltage Regulator Example Ying Sun
Voltage Regulator Example Ying Sun Voltage Regulator Circuit Vin is 9V. We want to regulate Vout at 5V. We use a zener diode of 3.3 V as shown in the attached data sheet. 1) Determine R1. R1 provides the
More informationUsed to help achieve electromagnetic compliance of end products Replace larger surface mount TVS Zeners in many applications.
RoHS Description The ML Series family of transient voltage surge suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of
More informationTSZL52C2V4 thru TSZL52C39 Taiwan Semiconductor. SMD Zener Diode. Small Signal Product FEATURES MECHANICAL DATA
SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 39V - Designed for mounting on small surface - Extremely thin / leadless package - Packing code with suffix "G" means green compound
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More information1N5333B-1N5388B. Features. Mechanical Data DO - 201AE POWER DISSIPATION: 5.0 W. Zener Diodes MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
N333B-N388B POWER DISSIPTION:.0 W Features DO - E Silicon planar power zener diodes For use in stabilizing and clipping curcuits with high power rating. Standard zener voltage tolerance is ±%. dd suffix
More informationM C C. 1N5221 THRU 1N5267
omponents 736 Marilla Street Chatsworth!"# $%!"# N522 THRU N5267 Features Wide Voltage Range Available Glass Package High Temp Soldering: 260 C for Seconds At Terminals Marking : Cathode band and type
More informationSM320A~SM3200A SCHOTTKY DIODE REVERSE VOLTAGE 20 TO 200V FORWARD CURRENT 3.0A
320A~3200A DESCRIPTION The 320A~3200A are available in A Package. ORDERING INFORMATION Package Type Part Number 320A 340A 360A 380A A 3100A 3120A 3150A 3200A Note 5,000pcs/Reel AiT provides all RoHS Compliant
More informationMM5Z2V4 - MM5Z75V Zener Diodes
June 2015 MM5Z2V4 - MM5Z75V Zener Diodes Features Wide Zener Voltage Range Selection, 2.4 V to 75 V Flat Lead, Surface Mount Device Under 0.70 mm Height Extremely Small Outline Plastic Package SOD523F
More informationCHIP DIODE. Zener Diodes CDZ55B Series. Zener Diodes CDZ55B Series 1:6
Zener Diodes CDZ55B Series 1:6 Zener Diodes CDZ55B Series FEATURES Silicon planar power zener diodes SMD chip pattern, available in various dimension included 0805 (CDZ55B-S series) Leadfree and RoHS compliance
More informationMaintenance/ Discontinued
Zener Diodes Silicon planar type For stabilization of power supply Features Extremely low noise voltage caused from the diode (2.4 V to 39V, /3 to /0 of our conventional MAZ3xxx series) Extremely good
More information5KP_A. VRM : Volts PPK : 5000 Watts MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Features 5000W Peak Pulse Power Excellent clamping capability Low incremental surge resistance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min) Typical IR less then 1μA above 10V
More information1Z6.2~1Z390, 1Z6.8A~1Z30A
TOSHIBA ZENER DIODE SILICON DIFFUSED JUNCTION TYPE 1Z6.2~1Z390, 1Z6.8A~A CONSTANT REGULATION TRANSIENT SUPPRESSORS Unit: mm Average Power Dissipation : P = 1 W Peak Reverse Power Dissipation : P RSM =
More informationFeatures. Case Material: Molded Plastic, Green Molding Compound. Computers and Peripheral
LOW CAPACITANCE BIDIRECTIONAL TVS DIODE Product Summary V BR (Min) I PP (Max) C T (Typ) 15V 9A 2pF Description This new generation TVS is designed to protect sensitive electronics from the damage due to
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V BR (uni-directional) 6.4 V to 49.1 V V BR (bi-directional) 6.4 V to 49.1 V V WM
More informationNZQA5V6AXV5 Series. Transient Voltage Suppressors
Transient Suppressors ESD Protection Diode with Low Clamping This integrated transient voltage suppressor device (TVS) is designed for applications requiring transient overvoltage protection. It is intended
More informationFeatures U-DFN Pin Description (Top View)
4 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Product Summary V BR (Min) I PP (Max) C I/O (Typ) 5.5V 3.5A 0.45pF Description The is a high-performance device suitable for protecting four high speed I/Os. These
More informationJEDEC DO-214AB(SMC) molded plastic. Solder plated, solderable per MIL-STD-750, Method 2026 Cathode indicated by color band except Bi-directional
3000W Surface Mount Transient Voltage Suppressor 3000W Surface Mount Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 220 volts Glass passivated junction Excellent clamping capability
More informationPESD2CAN CAN BUS ESD PROTECTION DIODE DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
CAN BUS ESD PROTECTION DIODE DESCRIPTION The is designed to protect Controller Area Network (CAN) bus lines and other industrial applications such as DeviceNet Bus lines from the damaging effects of Electrostatic
More informationCRY62~CRZ47 CRY62~CRZ47. Applications: Communication, Control and Measurement Equipment Constant Voltage Regulation Transient Suppressors
TOSHIBA Zener Diode Silicon Epitaxial Type CRY62~CRZ47 Applications: Communication, Control and Equipment Constant Regulation Transient Suppressors Unit: mm Average power dissipation: P = 0.7 W Zener voltage:
More informationML Varistor Series. Surface Mount Varistors
Pb The ML Series family of Transient Voltage Surge Suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of transient events,
More informationCM and SB Series Single Phase Bridge Rectifiers
Features: Electrically isolated metal case for maximum heat dissipation. Metal case with an electrically isolated mylar. Rating to 0 Volts PRV. Ampere surge capability. High efficiency. Mounting: Through
More informationML Varistor Series. Surface Mount Varistors
The ML Series family of Transient Voltage Surge Suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of transient events,
More informationESD4-DFN LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
LOW CAPACITANCE TVS ARRAY Description The is a multi-line, low capacitance, 7pF @ 2.5V bias transient voltage suppressor array. This device is designed to protect applications such as wireless telecommunication
More informationTBU-DT Series - TBU High-Speed Protectors
*RoHS COMPLIANT Features n Superior circuit protection n Overcurrent and overvoltage protection n Blocks surges up to rated limits n High-speed performance n Small SMT package n RoHS compliant* n Agency
More informationMaximun Ratings and Electrical Characteristics at 25 C
SOD123W Voltage Power Dissipation 9.1 to 220 V 1 W FEATURE Low profile package Ideal for automated placement Low leakage current High surge current and zener capability Low differential resistance Low
More informationML Varistor Series. Surface Mount Varistors. Features. Size Metric EIA
The ML Series family of Transient Voltage Surge Suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of transient events,
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W TVS Diode1.5KE Series
The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Dimension Dim Millimeters Inches Min
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UDD32CXXL01 series
Product specification November 05, 2018 V.0 DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection Devices
More informationDual back-to-back Zener diode
Rev. 01 28 January 2008 Product data sheet 1. Product profile 1.1 General description in a SOD323 (SC-76) very small Surface-Mounted Device (SMD) plastic package. 1.2 Features Non-repetitive peak reverse
More informationTBU-KE Series - TBU High Speed Protectors
*RoHS COMPLIANT E2550 0072 Features Superior circuit protection Overcurrent and overvoltage protection Blocks surges up to rated limits High speed performance Small SMT package RoHS compliant* Agency recognition:
More informationSDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical
More informationSF5x Series DO-201AD. Page <1> 26/07/08 V1.1. Dimensions : Inches (Millimetres)
Features: High efficiency, low V F. High current capability. High reliability. High surge current capability. Low power loss. For use in low voltage, high frequency inventor, free wheeling, and polarity
More informationI/O 4 NC I/O 3 I/O 1 V SS I/O 2
4 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Features Low Clamping Voltage Typical 9V at 10A 100ns, TLP Typical 9V at 10A 8μs/20μs IEC 61000-4-2 (ESD): Air ±30kV, Contact ±30kV IEC 61000-4-4 (EFT): 60A(5/50ns,
More informationSmall Signal Zener Diodes
BZX8-G-Series Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT range nom.. to V Test current T ; specification Pulse current Int. construction Single FEATURES Silicon planar Zener
More informationTransient Voltage Suppressor
Features: Glass Passivated Junction Low Incremental Surge Resistance, Excellent Clamping Capability Low Profile Package With Built-In Strain Relief for Surface Mounted Applications 600W Peak Pulse Power
More informationPAM2CAN CAN BUS ESD PROTECTION DIODE DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
CAN BUS ESD PROTECTION DIODE DESCRIPTION The is designed to protect Controller Area Network (CAN) bus lines and other industrial applications from the damaging effects of Electrostatic Discharge (ESD)
More informationUM5075/5079 Single Line ESD Protection Diode Array UM5075 SOD523 UM5079 DFN General Description Applications Features
General Description Single Line ESD Protection Diode Array UM5075 SOD523 UM5079 DFN2 1.0 0.6 The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as
More informationLow Capacitance Bidirectional Single Line TVS Protection Diode UM5080T DFN
General Description UM5080T Low Capacitance Bidirectional Single Line TVS Protection Diode UM5080T DFN2 1.0 0.6 The UM5080T TVS protection diode is designed to replace multilayer varistors (MLVs) in portable
More informationPLC497 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. Designed for protection against Electrostatic Discharge (ESD), Electrical Fast Transients
More informationUESD6V8L1F. Low Capacitance Single Line ESD Protection Diode Array UESD6V8L1F DFN General Description
Low Capacitance Single Line ESD Protection Diode Array DFN2 1.0 0.6 General Description The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell
More informationSMAJ SERIES 400 Watts Suface Mount Transient Voltage Suppressor SMA/DO-214AC. RoHS. Features
Pb RoHS COMPLIANCE creat by art SMAJ SERIES 4 Watts Suface Mount Transient Voltage Suppressor SMA/DO-214AC Features UL Recognized File # E-326243 Low profile package Built-in strain relief Glass passivated
More informationBZW04-5V8 thru BZW TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors DO-41 (DO-204AL) FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 400 W peak pulse power capability with a 10/0 μs waveform,
More information20 Zener rise operating resistance RZK IZ = 0.5 ma. 60 Reverse current. 0.1 A Temperature coefficient of zener voltage *3 SZ IZ = 5 ma IR VR = 4 V
Established : 009--09 Revised : 03-07- Doc No. TT4-EA-78 Silicon epitaxial planar type For constant voltage / For surge absorption circuit DZJ068 in SSMini type package Features Excellent rising characteristics
More informationTBU-DT Series - TBU High-Speed Protectors
Features n Superior circuit protection n Overcurrent and overvoltage protection n Blocks surges up to rated limits n High-speed performance n Small SMT package n RoHS compliant* n Agency listing: Applications
More informationSDC36C. TVS Diode Array for Proximity Switch Input Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The is a highsurge transient voltage suppressor (TS) optimized for protection of sensitive digital sensors used in proximity switches and industrial control applications. The protects the components
More information