INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
|
|
|
- Evangeline Chandler
- 5 years ago
- Views:
Transcription
1 TNC Connectors Flexible Cable... 3 In-Series Adapters... 4 Specifications... 2 RF Adapter Kit Adapters... 6 N Connectors Panel Mount and In-Series Adapters Flexible Cable... 8 Specifications... 7 F Series Connectors Flexible Cable Straight, Right Angle PC Mount, Terminations, Adapters Specifications UHF Connectors Bulkhead Mounts and Adapters Flexible Cables Specifications Mini-UHF Connectors Flexible Cable Specifications
2 TNC Connectors Specifications The TNC connector is a threaded version of the BNC mating interface. All contacts are captivated for ruggedness. The TNC is a commercial quality connector that provides additional coupling retention for shock and vibration applications. The TNC connector intermates with all standard 50 Ohm TNC connectors. Electrical Characteristics Impedance: 50 Ohm nominal (except where noted) Frequency range: 0-11 GHz Working voltage: 500 volts RMS at sea level Dielectric withstanding voltage: 1500 volts RMS at sea level Corona level: 375 volts minimum at 70,000 feet Contact resistance: Outer milliohms maximum Center milliohms maximum Insulation resistance: 5000 megohms minimum Environmental Characteristics Recommended temperature range: -55 O C to +85 O C Moisture Resistance: MIL-STD-202 Mechanical Characteristics Durability: 500 cycles Cable retention: 20 lbs., RG-58 C/U cable Materials Body and coupling nut: Zinc or brass Contact: Beryllium copper, phosphor bronze or brass Crimp Sleeve: Brass Insulator: Teflon, TPX or Delrin Hardware: Brass Plating: Specifications* Body - Nickel Crimp sleeve - Nickel Hardware - Nickel Contact - Gold * These values are typical and may not apply to all connectors. Delrin and Teflon are registered trademarks of Dupont Corporation. 164
3 TNC Connectors For Flexible Cable Straight Crimp Type Plug - Solder or Crimp Contact - 3 Piece CABLE TYPE CONTACT I.D. BODY I.D. SLEEVE I.D. CPMC-TNC-1 RG-58, (1.12).126 (3.20).206 (5.23) CPMC-TNC-2 RG-59, (0.86).173 (4.39).261 (6.63) CPMC-TNC-13 RG-142, 223, 400, (1.12).126 (3.20).220 (5.59) CPMC-TNC-16 Proflex RG (1.40).173 (4.39).261 (6.63) CPMC-TNC-17 RG-8X (MINI 8), LMR (1.65).173 (4.39).261 (6.63) Assembly instructions page 253. Straight Crimp Type Plug - Solder or Crimp Contact - 4 Piece CABLE TYPE CONTACT I.D. BODY I.D. SLEEVE I.D. TERMINATION CPM-TNC-19 RG-174, 188, (0.62).167 (4.24).118 (3.00) Crimp Insert CPM-TNC-20 RG-179, (0.42).167 (4.24).118 (3.00) Crimp Insert Assembly instructions page
4 TNC Connectors For Flexible Cable and In-Series Adapters Straight Crimp Type, Rear Mount Bulkhead Jack - Solder or Crimp Contact - 3 Piece CABLE TYPE CP-TNC BM RG-174, 188, 316 Assembly instructions page 253. Mounting hole layout figure 24 page 203. Right Angle Bulkhead Jack Receptacle - Shielded CPM-TNC-PC-002 Mounting hole layout figures 24 and 28 page
5 TNC Connectors In-Series Adapters Jack to Jack Adapter CP-AD355 Jack to Bulkhead Jack Adapter CP-AD356 Mounting hole layout figure 24 page
6 RF Adapter Kit Specifications RF Adapter Kit New DESCRIPTION QTY. DESCRIPTION QTY SMA Jack to Bkhd. Jack, Gold Pl. 4 CP-AD515 BNC Plug to RCA Jack SMA Jack to Jack, Gold Pl. 2 CP-AD555 BNC Jack to Jack SMA Plug to Plug, Gold Pl. 4 CP-AD556M BNC Jack to Bkhd. Jack SMA Plug to Jack, Gold Pl. 4 CP-AD582 SMA Plug to BNC Plug RA SMA Jack to Jack, Gold Pl. 2 CP-AD583 SMA Jack to BNC Plug RA SMA Plug to Plug, Gold Pl. 2 CP-AD800 N Plug to Plug RA SMA Plug to Jack, Gold Pl. 4 CP-AD356 TNC Jack to Bkhd. Jack SMA Dummy Load Plug, Gold Pl. 2 CP-AD809 N Plug to BNC Jack 2 CP-AD503 BNC RA BNC Plug to Jack 2 CP-AD810 N Plug to SMA Jack 2 CP-AD505 BNC Jack to Plug to Jack (T) 2 CP-AD817 N Plug to SMA Plug 2 CP-AD506 BNC Jack to Jack to Jack (T) 2 CP-AD818 N Jack to SMA Plug 2 CP-AD507 SMA Jack to BNC Jack 3 CP-AD819 N Jack to SMA Jack 2 CP-AD508 SMA Plug to BNC Jack 3 CP-AD850 N Jack to Jack 2 CP-AD511 BNC Plug to Plug 3 CP-AD851 N Jack to Bkhd. Jack 2 TOTAL: 72 Adapters 168
7 N Connectors Specifications The N connector employs a large diameter threaded interface for excellent strength and reliability. This commercial quality connector handles high power applications such as antenna feeds for radios and cell sites. Termination options include crimp and clamp styles for rugged service. Specifications* Electrical Characteristics Impedance: 50 Ohm nominal Frequency range: 0-11 GHz Working voltage: 500 volts RMS at sea level Dielectric withstanding voltage: 1500 volts RMS at sea level Corona level: 375 volts minimum at 70,000 feet Contact resistance: Outer milliohms maximum Center milliohms maximum Insulation resistance: 5000 megohms minimum Environmental Characteristics Recommended temperature range: -55 O C to + 85 O C Moisture Resistance: MIL-STD-202 Mechanical Characteristics Durability: 500 cycles Cable retention: 20 lbs., RG-58 C/U cable Materials Body and coupling nut: Brass Contact: Brass, phosphor bronze or beryllium copper Crimp sleeve: Brass Insulator: Teflon or Delrin Hardware: Brass Plating: Body - Nickel Crimp sleeve - Nickel Hardware - Nickel Contact - Gold * These values are typical and may not apply to all connectors. Delrin and Teflon are registered trademarks of Dupont Corporation. 169
8 N Connectors For Flexible Cable and Bulkhead Mount Straight Crimp Type Plug - Solder or Crimp Contact CABLE TYPE A CONTACT I.D. BODY I.D. SLEEVE I.D. CPN-68-1 RG-58; BELDEN (33.78).042 (1.07).125 (3.18).212 (5.38) CPN-68-8 RG-8, (35.18).093 (2.36).293 (7.44).430 (10.92) CPN RG-142, 223, (33.78).042 (1.07).127 (3.23).223 (5.66) Assembly instructions page 254. Straight Crimp Type Plug Second Termination - 3 Piece CABLE TYPE A CONTACT I.D. BODY I.D. SLEEVE I.D. CPN-1 RG (36.83).044 (1.12).125 (3.18).206 (5.23) CPN-2 RG-59, (36.83).0325 (0.83).173 (4.39).261 (6.63) CPN-8 RG-8 Types (39.37).089 (2.26).300 (7.62).420 (10.67) CPN-8/110 RG-8, 213, LMR (39.37).110 (2.79).300 (7.62).420 (10.67) CPN-16 PROFLEX RG (36.96).055 (1.40).173 (4.39).261 (6.63) CPN-17 RG8X (MINI 8) (36.96).065 (1.65).173 (4.39).261 (6.63) CPN-142T RG-142 TFE (36.96).044 (1.12).125 (3.18).220 (5.59) Assembly instructions page
9 N Connectors For Flexible Cable Straight Crimp Type Bulkhead Jack - Diecast Body CABLE TYPE RG-161/U, 174,188, 316 RG-188 DS, RG-316 DS RG-58/U, 141, 303 RG-55/U, 142, 223, 400 Assembly instructions page 241. Mounting hole layout figure 11 page 201. N connector plug also available. ELECTRICAL RATINGS Impedance: 50 Ohms Frequency Range: 0-11 GHz VSWR: (f = GHz) Typical VSWR Frequency Range (GHz) RG-316 cable RG-58 cable RG-142 cable Working Voltage: (VRMS maximum) Connectors for Cable Type Sea Level 70K Feet RG RG RG Dielectric Withstanding Voltage: (VRMS minimum at sea level) RG RG RG Insulation Resistance: 5000 megohms minimum Contact Resistance: (milliohms maximum) After Initial Environmental Center contact Outer contact N/A Braid to body N/A ** All gold plated parts include a.00005" min. nickel underplate barrier layer. Avoid user injury due to misapplication. See safety advisory definitions inside front cover. MECHANICAL RATINGS Engagement Design: MIL-STD-348, series N Engagement Force/Disengagement Force: 6 inch-pounds maximum Mating Torque: 6 to 10 inch-pounds Cable Retention: Axial Force (lbs)* RG RG RG * Or cable breaking strength whichever is less. Durability: 500 cycles minimum ENVIRONMENTAL RATINGS (Meets or exceeds the applicable paragraph of MIL-C-39012) Temperature Range: - 65 C to C Thermal Shock: MIL-STD-202, Method 107, Condition B Corrosion: MIL-STD-202, Method 101, Condition B Shock: MIL-STD-202, Method 213, Condition I Vibration: MIL-STD-202, Method 204, Condition B Moisture Resistance: MIL-STD-202, Method 106 MATERIAL SPECIFICATIONS Bodies: Main body - zinc per ASTM B86-71, nickel plated per QQ-N-290 Rear body - brass per QQ-B-626, nickel plated per QQ-N-290 Contacts: Beryllium copper per QQ-C-530, gold plated** per MIL-G-45204,.00001" min. Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 Crimp Sleeves: Copper per WW-T-799, nickel plated per QQ-N-290 Mounting Hardware: Nut - brass per QQ-B-626, nickel plated per QQ-N-290 Lockwasher - steel per QQ-S-700, zinc plated per QQ-Z
10 N Connectors Panel Mount and In-Series Adapters Flange Mount Jack Receptacle CP-AD801 Mounting hole layout figure 34 page 204. Jack to Jack Adapter CP-AD850 Jack to Bulkhead Jack Adapter CP-AD851 Mounting hole layout figure 33 page 204. Plug to Plug Adapter CP-AD
11 F Series Connectors Specifications The F Connector provides economical distribution of audio/video TV signals. The F Plug Connector typically employs the center conductor of the cable as the male contact for quick assembly in the field. Specifications* F Series Electrical Characteristics Impedance: 75 Ohms Frequency range: MHz Working voltage: 500 VRMS max at sea level Dielectric withstanding voltage: 1500 VRMS max at sea level Insulation resistance: 5000 megohms Environmental Characteristics Temperature range: -55 O C to +85 O C Moisture resistance: MIL-STD-202 Mechanical Characteristics Durability: 100 cycles Cable retention: 20 lbs. * These values are typical and may not apply to all connectors. 173
12 F Series Connectors For Flexible Cable F Series Connectors For RG-59 w/separate 1/4 crimp ring w/separate 1/2 crimp ring for standard RG-59 cable compression F RG-59 dual Tri/Shield CPF-59-1/4 Crimp Tool Hex Size (6.48) CPF-59-1/2 Crimp Tool Hex Size (6.48) CPF-59-ALM Crimp Tool Hex Size (8.18) CPF-59-CP Compression Tool P F Series Connectors For RG-6 for RG-6 for Tri-Shield for RG-6 Quad Shield for Teflon/Plenum RG-6 CPF-56-ALM Crimp Tool Hex Size (8.18) CPF-56-ALX Crimp Tool Hex Size (8.18) CPF-56-ALS Crimp Tool Hex Size P.359 (9.12) CPF-56-P Crimp Tool Hex Size (8.18).324 dia., chrome plated/ interior gasket for water proofing Straight Plug twist on (no crimp) compression F RG-6 Dual/Tri/Shield CPF-56-ALMWP Crimp Tool Hex Size (8.18) CPFI-56 CPF-56-CP Compression Tool P F Series Connector For RG-11 for standard RG-11 CPF-11-ALM Crimp Tool Hex Size P.448 (11.38) 174
13 F Series Connectors F Straight Right Angle PC Mount Connectors, Plug Termination and Adapters F Series Connectors F Straight and Right Angle PC Mount Connectors Side Edge Mount PCB Jack Vertical Mount PCB Jack Right Angle Mount PCB Bulkhead Jack CPF-61-SE CPF-61-PC CPF-61-SR Board Thickness.062 (1.57) F Plug Termination Plug Termination 75 Ohm F, 1/2 watt 5% terminator CPF-59-T F In-Series Adapters Jack to Jack Adapter 3/4 inline splice Jack to Jack Adapter 3/4 w/ nut and washer Jack to Jack Adapter 1 inline splice Nut and Washer For use with all F Bulkhead mounts/splices CPF-81 CPF-81-NW CPF-81-L CPF-NW 175
14 UHF Connectors Specifications The UHF connectors are low cost, general purpose units designed for low frequency system applications. These commercial quality connectors are equipped with threaded coupling interfaces for secure and reliable connections. The standard UHF and Mini-UHF connectors are not intermateable. Specifications* Standard UHF Electrical Characteristics Impedance: Non-constant Frequency range: MHz Working voltage: 500 volts RMS at sea level Dielectric withstanding voltage: 1500 volts RMS at sea level Insulation resistance: 5000 megohms minimum Environmental Characteristics Recommended temperature range: -55 O C to +85 O C Mechanical Characteristics Durability: 500 cycles Cable retention: 20 lbs., RG-58 C/U cable Materials Body and coupling nut: Zinc or Brass Contact: Beryllium copper or Brass Crimp Sleeve: Brass Insulator: Delrin Plating: Body - Nickel Crimp sleeve - Nickel Contact - Gold or Nickel * These values are typical and may not apply to all connectors. Delrin is a registered trademark of Dupont Corporation. 176
15 UHF Connectors For Flexible Cables Straight Crimp Type Plug - Crimp Contact PART CABLE WIRE WIRE JACKET NO. TYPE A B GAUGE DECIMAL O.D. CPL RG (19.15).810 (20.57) (0.83).185 (4.70)-.205 (5.21) CPL RG-59, (17.48).810 (20.57) (0.64).220 (5.59)-.250 (6.35) CPL RG-58 COPHASE.700 (17.78).832 (21.13) 2/20 2/.032 (0.81) 2/.185 (4.70)-.205 (5.21) CPL RG (17.63).820 (20.83) (2.16).400 (10.16)-.410 (10.41) CPL RG-59 COPHASE.700 (17.78).856 (21.74) 2/22 2/.025 (0.64) 2/.220 (5.59) CPL * RG-59 PLENUM.696 (17.68).710 (18.03) (0.83).205 (5.21)-.220 (5.59) CPL RG-8X (MINI 8).696 (17.68).710 (18.03) (1.28).220 (5.59)-.250 (6.35) Assembly instructions page 256. *1-Piece Straight Crimp Type Plug - Crimp Contact, Double Nut PART CABLE WIRE WIRE JACKET NO. TYPE GAUGE DECIMAL O.D. CPL RG (0.88).185 (4.70)-.205 (5.21) Assembly instructions page
16 UHF Connectors For Flexible Cable, Bulkhead and Adapters Straight Solder Type Plug CABLE TYPE DESCRIPTION CP-AD250 RG-8, 213 Standard, PL-259 Straight Crimp Type Jack to Center - Conductor Twist-On - 2 Piece PART CABLE WIRE WIRE JACKET NO. TYPE GAUGE DECIMAL O.D. CPF RG (0.83).185 (4.70)-.205 (5.21) Assembly instructions page Hole Flange Mount Jack CP-AD
17 UHF Connectors Adapters Jack to Jack Adapter CP-AD204 Bulkhead Jack to Bulkhead Jack Adapter CP-AD207 Jack to Jack to Jack T Adapter CP-AD
18 Mini-UHF Connector Specifications Mini-UHF connectors are low cost, general purpose units designed for low frequency system applications. These commercial quality connectors are equipped with threaded coupling interfaces for secure and reliable connections. The standard UHF and Mini-UHF connectors are not intermateable. Specifications* Mini-UHF Electrical Characteristics Impedance: Non-constant Frequency range: 0-2 GHz Working voltage: 500 volts RMS at sea level Dielectric withstanding voltage: 1500 volts RMS at sea level Insulation resistance: 5000 megohms minimum Environmental Characteristics Recommended temperature range: -55 O C to +85 O C Mechanical Characteristics Durability: 500 cycles Cable retention: 20 lbs., RG-58 C/U cable Materials Body and coupling nut: Zinc or Brass Contact: Brass Crimp Sleeve: Brass Insulator: TPX Polymethylpetene Plating: Body - Nickel Crimp sleeve - Nickel Contact - Gold or Nickel * These values are typical and may not apply to all connectors. 180
19 Mini-UHF Connector For Flexible Cable Straight Crimp Type Plug - Solder or Crimp Contact CABLE TYPE A CONTACT I.D. BODY I.D. SLEEVE I.D. MINI-UHF-1 RG (15.49).044 (1.12).126 (3.20).206 (5.23) MINI-UHF-1B RG-58 Black UV Coating.613 (15.57).044 (1.12).126 (3.20).206 (5.23) MINI-UHF-2 RG-59, (15.57).034 (0.86).173 (4.39).261 (6.63) MINI-UHF-16 PROFLEX RG (15.49).055 (1.40).173 (4.39).261 (6.63) MINI-UHF-17 RG-8X (MINI 8).600 (15.24).065 (1.65).173 (4.39).261 (6.63) Assembly instructions page
MCX Connectors. Alphabetical Index. Johnson Components P.O. Box 1732 Waseca, MN Fax:
MCX Connectors Alphabetical Index 133-3701-201 3 133-3701-206 3 133-3701-211 3 133-3701-216 3 133-3701-221 3 133-3701-226 3 133-3701-231 4 133-3701-236 4 133-3701-301 5 133-3701-306 5 133-3701-311 5 133-3701-316
SMA - 50 Ohm Connectors
142-0701-621 4 142-0701-626 4 142-0701-631 4 142-0701-636 4 142-0701-701 7 142-0701-706 7 142-1701-011 5 142-1701-016 5 142-1701-031 4 142-1701-036 4 142-1701-041 5 142-1701-046 5 142-1701-121 5 142-1701-126
SMA - 50 Ohm Connectors
Alphabetical Index 142-0701-201 4 142-0701-206 4 142-0701-231 4 142-0701-235* 4 142-0701-236 4 142-0701-301 5 142-0701-306 5 142-0701-335* 6 142-0701-421 5 142-0701-426 5 142-0701-491 5 142-0701-496 5
In-Series and Between-Series Adapters SMA
Adapters SMA In-Series and Between-Series Adapters SMA If your choice of SMA Adapter is not shown in this section, please refer to the Table below to determine other possible locations. Should you not
The Custom Interconnect Leader
7-16 Series.354.276.843.811 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR: Intermodulation: 50 ohms DC to 7 GHz 2,700 volts
SMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions
Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,
Series PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
SMA SERIES COAXIAL CONNECTORS
General Information Features Part Number Index Applications Coupling types and interface mating dimensions Semi-rigid conformable cable connectors Flexible cable connectors Connectors for modules Bulkhead
Corona 70,000 Ft. Permeability Risetime Degradation (Mated Pair) 2.0 max MH z
NDL Ultraminiature Triaxial Connectors Connector Specifications Interface Dimensions Ø.020 Ø.082 Ø.168 Ø.162 Electrical Specifications Dielectric Center contact to intermediate contact: 1000 Vrms min Withstanding
SMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
Cannon 50 Ohm Connectors
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
Prices, specifications, statement of warranty, and other terms and conditions are subject to change without notice by Lighthorse Technologies, Inc.
Section Index Connectors Specifications... 93 Flexible Cable... 95 Panel Mount... 99 Bulkhead... 100 PCB Mount... 101 In Series Adaptors... 103 Other Information Assembly Instructions... 176 Cable Assembly...
The Custom Interconnect Leader
SC Series.337.307.040.003.085.194 MIN FLARE TO MEET GAGE TEST.276 MIN.549.781 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR:
Mating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
2.92mm (SMK) Connectors
2.92mm (SMK) Connectors Catalog belfuse.com/cinch The Johnson 2.92mm Connector provides an excellent solution for demanding applications requiring high frequency transmission. Although similar to the SMA
Ganged Board to Board SMP Solutions. Catalog. belfuse.com/cinch
Ganged Board to Board SMP Solutions Catalog belfuse.com/cinch SMP CONNECTORS One of the key benefits of the SMP connector interface is its use in high frequency blind-mate applications. The design of the
TNC SERIES Miniature Coaxial Connectors
SERIES Miniature Coaxial Connectors FEATURES connectors, medium sized coaxial connectors with thread coupling, are designed for applications where extreme vibration is encountered.the increased rigidity
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents SSMA Introduction... 12-4 Characteristics... 12-4 Plugs... 12-5 Receptacles...
OSMP Microminiature Push-On Coaxial Connectors
Introduction Features Intermateable with Gilbert GPO Series Enhanced performance features Simplified ssembly etween Series dapters For OSMP etween Series dapters, see Page 438. OSMP microminiature push-on
Series SMPM-T. Description. Compatibility. Content. Interface dimensions (mm/inches) SMPM-T male (pin contact), smooth bore
Series Description The is the smallest threaded open source connector on the market. Its unique and innovative combination of a MIL- STD-348 SMPM female interface connector together with a retractable
Connectors. High Performance to 65 GHz. Applications. PDF Volume 1. Click Here for Table of Contents Click Here for Specifications
SMP/SMPM Applications DELTA ELECTRONICS MANUFACTURING CORP. Connectors High Performance to 65 GHz PDF Volume 1 Click Here for Table of Contents Click Here for Specifications (978) 927-1060 FAX (978) 922-6430
N Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount Bulkhead In Series Adaptors...
Section Index Connectors Specifications... 137 Flexible Cable... 139 Semi-Rigid Cable... 145 Panel Mount... 147 Bulkhead... 148 In Series Adaptors... 149 Other Information Assembly Instructions... 176
SMP. Description. Compatibility. Content. Interface dimensions (mm/inches) SMP female. Interface dimensions conformable to the following standards:
Description Compatibility HUBER+SUHNER Astrolab connectors provide a robust, proven and fully compatible plug-in solution for applications up to 40 GHz. HUBER+SUHNER Astrolab connectors have been MIL-SPEC
ndl-q & ndl-t SerieS CONNECTORS
ndl-q & ndl-t SerieS CONNECTORS TRIAXIAL CONNECTORS Interface Dimensions Mechanical & Environmental Specifications (Ø.168) Temperature Rating Corrosion -65 C to + 165 C MIL-STD-202 Method 101, Test Condition
Applications & Features, Type SSMP When using blind mate connectors in an application, careful consideration has to be given to choosing the right con
SSMP Push-On Connectors & Adapters THE SSMP (Sub-Sub-Miniature-Push-On) is a 1.7 mm connector, using solid dielectric interface. The connector is 70% of the size of the SMP and therefore allows even higher
SMK Connectors. General Description. Contents (Click on any line to go to the indicated page) Test Data
SMK Connectors General Description These high-performance SMK (2.92 mm) connectors feature maximum VSWR for cable connectors of 1.15:1 from DC to 18 GHz, and 1.3:1 from 18 to 40 GHz. The maximum VSWR for
Our Most Important Connection is with You. SECTION 3. Board-to-Board: MMBX / SMP-MAX R223 / R222M
SECTION 3 Board-to-Board: MMBX / R223 / R222M Contents MMBX Introduction... 3-4 Interface... 3-5 Characteristics... 3-6 Plugs... 3-7 PCB receptacles... 3-7 to 3-8 Adapters... 3-9 Demo board... 3-10 Panel
SMA Connectors Series
SMA Connectors Series Content Page Description.. 2 Interface Dimensions.. 2 Interface Dimensions in mm/inches.. 2 Characteristics. 3 Cable Connectors 4 PCB Connectors 11 Panel Receptacles.. 13 Adapter
SERIES MCX 50 MICRO MINIATURE CONNECTORS
SERIES MCX 50 MICRO MINIATURE CONNECTORS DESCRIPTION CONTENT PAGE HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size, weight, durability and performance for applications
SMA Series - Crimp Plug and Jack
Plug Features: SMA connectors are semi-precision, subminiature devices that provide repeatable electrical performance. These devices offer broadband performance with low reflection. These properties, along
PERFORMANCE SPECIFICATION ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES SMA TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH POUND MIL-PRF-55339/48B w/amendment 1 15 June 2017 SUPERSEDING MIL-PRF-55339/48B 30 April 2015 PERFORMANCE SPECIFICATION ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES SMA TO SERIES
PERFORMANCE SPECIFICATION SHEET CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES C (UNCABLED-RECEPTACLE, FEMALE, JAM NUT MOUNTED, HERMETIC SEAL, CLASS 2)
INCH-POUND MIL-PRF-39012/14C 10 August 2016 SUPERSEDING MIL-PRF-39012/14B 18 September 1977 PERFORMANCE SPECIFICATION SHEET CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES C (UNCABLED-RECEPTACLE, FEMALE,
N Series Connectors Medium sized connector for high-voltage applications Suited for critical applications and environments Performance to 11 GHz (commercial) and 18 GHz (hi frequency) Intermateable with
GMS Interconnect Series Product Information
GMS Interconnect Series Product Information Microwave Products Product Features: Frequency range: DC up to 23 GHz, Force to engage/disengage: 10 ounces min./2.5 pounds max., Male connectors have full self-centering
BMA. 1. Applications & Features, Specifications & Interface Dimensions 2. Connectors of Type BMA 3. Adapters to BMA
CONTENT BMA INTRODUCTION to CONNECTORS & ADAPTERS Page 9 7/16 Page 15 N BMA Page 45 SBX SBY Page 61 Page 85 1. Applications & Features, Specifications & Interface Dimensions 2. Connectors of Type BMA 37
SMP / SMP-COM / SMP-MAX series R222
3 SMP / SMP-COM / SMP-MAX series R222 SMP-MAX INTRODUCTION BOARD TO BOARD SOLUTIONS The Best Systems Radiall s engineers work with your engineers allowing us to develop the best competitively priced misalignment
Type SMP Connectors Product Catalog
Type SMP Connectors Product Catalog Connectivity for SMP Connectors Table of Content Connectivity for Table of Contents PAGE Introduction....................................3-4 Specifications...................................5-8
SMA. Precision 26.5GHz Connectors
SMA Precision 26.5GHz Connectors SMA Precision Connectors SMA subminiature connectors are 50 ohm precision connectors initially designed for performance through 18GHz, however the standard interface is
Board-to-Board connections
Board-to-Board connections MBX/MFBX/MMBX connectors Edition 2014/08 Innovative connections Your partner for system solutions The HUBER+SUHNER Group is a leading global supplier of components and systems
Amphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
Microwave Gilbert Push-on Interconnects
Microwave Gilbert Push-on Interconnects Table of Contents Table of Contents Connect to Precision and Performance 4 Custom Designs 5 Corning Optical Communications RF LLC 6 Reference Guide 8 GPO Products
Introduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
Amphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
SECTION 7 SMA/SMA-COM/BMA R125/R124/R128 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 7 /COM/BMA R125/R124/R128 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents BMA Introduction... 74 Characteristics... 75 Plugs... 76 Jacks... 77 to 78 Receptacles...78
PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES N (CABLED), PIN CONTACT, CLASS 2)
INCH-POUND MIL-PRF-39012/1J 21 November 2016 SUPERSEDING MIL-PRF-39012/1J 26 February 2016 PERFORMNCE SPECIFICTION SHEET CONNECTORS, PLUG, ELECTRICL, COXIL, RDIO FREQUENCY, (SERIES N (CLED), PIN CONTCT,
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
Extensive range of QPL standard and custom audio connectors trusted by our fighting forces for 35 years. MIL-DTL audio connectors
Extensive range of QPL standard and custom audio connectors trusted by our fighting forces for 35 years MIL-DTL-55116 audio connectors MIL-DTL-55116 solutions Eaton s MIL--DTL--55116 connectors and cable
EN3 SERIES WEATHERTIGHT CONNECTORS NEW PRODUCT BULLETIN 602
FEATURES & BENEFITS Sealed to IP68 NEMA 250 (6P) Patented grommet & o-ring free design Available in ribbed or winged coupling ring Cable, panel & cable to cable options Gold plated contacts standard Solder,
2M Series Selection Table. 2M801, 2M803, 2M804 and 2M805
M Series Selection Table M0, M0, M0 and M0 SERIES M0 M0 M0 M0 PAGES Page -0 Pages - Pages - Pages -0 TYPE Dual-Start ACME Thread Bayonet Push-Pull Tri-Start ACME Thread DESCRIPTION More rugged keys and
Amphenol. The Company. What is a Filtered Connector? Benefits. Choosing the Right Capacitance for Your Filter Connector
Amphenol The Company Amphenol Canada Corp. a subsidiary of Amphenol Corporation, is an international leader in the manufacture of Filtered Connectors and Specialty Interconnect Devices, and has been pioneering
SECTION 1 IMP / UMP R107
1 SECTION 1 / UMP R107 Contents Introduction... 1-4 to 1-6 Characteristics...1-7 Board to board connectors...1-8 Receptacle packaging...1-9 Assembly instructions... 1-9 to 1-10 UMP Characteristics...1-11
PIN CONTACT MATING FACE
Differential Twinax Contacts General Description AMPHENOL DIFFERENTIAL TWINAX CONTACTS Offer several advantages for high data transfer rates, low power consumption and excellent EMI compatibility: Two
SSMC Connectors. Microminiature, screw-on mating High performance to 12.4 GHz. General Description
SSMC Connectors Microminiature, screw-on mating High performance to 12.4 GHz General Description Delta SSMC connectors are microminiature, 50Ω impedance connectors with 6-40 threaded coupling. SSMC connectors
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
Dura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
Amphenol High Density HDB 3 /HSB 3 Connectors
Amphenol HDB 3 /HSB 3 Connectors TABLE OF CONTENTS Amphenol HDB 3 and HSB Connectors 3 Table of Contents..............................45 Introduction - Features, Options, Performance...............................
0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY
![0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY](/thumbs/83/88977257.jpg "0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY")
ONLINE CATALOG SWITCHCRAFT, INC. N. Elston Ave. Chicago, IL 00 77 79-700 FAX: 77 79-19 www.switchcraft.com EN MINI WEATHERTIGHT CONNECTOR SERIES EN CORD CONNECTOR 1.8 [9.8] 0. REF 0.70 dia. [17.8] PIN
M-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc
Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:
triaxial CONtaCts Overview Features
triaxal CONtaCts triaxial CONtaCts Overview Smiths Connectors concentric twinax/triax contacts provide flexibility in the design of high speed data systems. The contacts, including the unique sizes 10
RTX series EN
RTX series EN3716 10 CONTENTS RTX series Page RTX series Introduction... 10-4 Applications... 10-4 Product overview... 10-5 Technical characteristics... 10-6 & 10-7 How to order connectors... 10-8 Dimensions
Commercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
RF Connectors Technical Data Sheet. Gold over Nickel Plated Brass Contact. Size 0.5 in [12.7 mm] . Weight lbs [2.27 g].
![RF Connectors Technical Data Sheet. Gold over Nickel Plated Brass Contact. Size 0.5 in [12.7 mm] . Weight lbs [2.27 g].](/thumbs/76/74366494.jpg "RF Connectors Technical Data Sheet. Gold over Nickel Plated Brass Contact. Size 0.5 in [12.7 mm] . Weight lbs [2.27 g].")
RP SMA Female Connector Solder Attachment for PE-SR402AL, PE-SR402FL, PE-SR402FLJ, PE- SR402TN, RG402, Gold Plated Brass Body RF Connectors Technical Data Sheet PE44723 Configuration SMA Female Reverse
Hex and O Crimp [.572] Dia. Max. Interchangeable Dies for Interchangeable Termination
![Hex and O Crimp [.572] Dia. Max. Interchangeable Dies for Interchangeable Termination](/thumbs/89/97658082.jpg "Hex and O Crimp [.572] Dia. Max. Interchangeable Dies for Interchangeable Termination")
BNC Connectors, 75 Ohm Plugs, Crimp Hex and O Crimp These connectors have been designed for optimum performance and have a true 75 ohm impedance the complete length of the connector. The crimp die tooling
Labs. Introduction. Application Notes
Introduction Application Notes Florida RF has provided an extensive collection of Application Notes in this section to help designers select and specify cable assemblies. These Application Notes cover
Product Performance Specification Mini Coaxial Connector
Product Performance Specification Mini Coaxial Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Coaxial connector and connector system.
FISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-55302/65H 3 February 2004 SUPERSEDING MIL-C-55302/65G 8 April 1993 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE
Electrical Test voltage (Vrms) Service sea level at m M I II
Applications Compact profile and high density connectors for all military and aeronautical purposes Standards MIL-C 38999 Series II - QPL approved NFC 93422 HE 309 VG 96912 series II PAN 6433-1 BS 9522
Electrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
RJF TV Ethernet Connection System for Harsh Environment
RJF TV Ethernet Connection System for Harsh Environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarisation Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation capability
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
.093 Commercial Pin and Socket Connectors
Product Facts Polarised Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel-mounting
RF & MW Connectors RF & MW Adapters RF Connectivity. RF & MW Connectors
RF & MW Connectors - 2.4 mm Connectors - 2.92 mm(k) Connectors - Hermetic Seal (0.02 Glass Bead) - SMP Connectors - BMA Connectors - High Performance End Lanch Connectors - High Performance SMA Connectors
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-553/3F w/amendment 8 July 7 SUPERSEDING MIL-DTL-553/3F May 6 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT-THRU, 3 thru CONTACT POSITIONS,
Labs. Introduction. Application Notes
Introduction Application Notes Florida RF has provided an extensive collection of Application Notes in this section to help designers select and specify cable assemblies. These Application Notes cover
ULTRA-RESISTANT STERILIZABLE EASY TO HANDLE KEY FEATURES
B7 CHAPTER FISCHER CORE SERIES ULTRA-RESISTANT STERILIABLE EASY TO HANDLE KEY FEATURES IP68 or hermetic Nuclear decontamination fluids compatible Easy to handle with gloves or remotely B7-1 Table of contents
Elma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma
QSL RF Connector System
QSL RF Connector System DESCRIPTION Coaxial Cable Insulation Displacement Interface Low profile Highly reliable ruggedized interface Surface mount technology Excellent price-to-performance ratio APPLICATIONS
CONNECTORS & RECEPTACLES
TINI Q-G MINIATURE CONNECTORS DESIGN FEATURES STYLE Streamlined, miniaturized with nickel-plated metal and contrasting black plastic parts. Designed for light weight and unobtrusiveness. Also available
Mini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
Distributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Standard Products Assembly Equipment Table 3M Electronic Products Division
Plug Connectors 3M plug connectors can be used with either flat cable or discrete wire and are the ideal interface for standard sockets. They can be used as a T-tap from a cable bus, a splice connector
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
Series 3400 lightning EMP protectors Quarter-wave stub technology
Series 3400 lightning EMP protectors Quarter-wave stub technology Description HUBER+SUHNER quarter-wave lightning EMP protectors offer the best lightning protection available in the market, as they form
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. HIGH POWER CONNECTORS Panel Mounts and Cord Plugs HPC Series Switchcraft
PRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
CONTENTS. Center Contact Configuration. Specifications, Materials etc Receptacles. Plug Receptacles Adapters. Convertible Adapters
CONTENTS Center Contact Configuration Specifications, Materials etc. Receptacles Plug Receptacles Adapters Convertible Adapters Connectors for Semi-Rigid Cable Connectors for Flexible Cable 3 4 5-9 10-11
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
AXOMACH E-16. High data rate links for faster data transmission. Microwave coaxial cables. Panel mount connector QUASI-FLEX. Cable mount connector 2
AXOMACH High data rate links for faster data transmission AXON proposes AXOMACH, a range of high data rate links composed of low loss microwave coaxial cables and different connector types: AXOMACH Micro-D
Modular FLATPAQ. provided, and Elcon will provide samples, typically within one week.
Modular FLATPAQ Modular FLATPAQ connectors provide custom solutions to hot pluggable AC and DC power needs in a board-to-board format. By using off-the-shelf modular components, power and signal modules,
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-55302/64H 21 June 2016 SUPERSEDING MIL-DTL-55302/64H w/amendment 1 31 March 2011 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET
8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
Series 3402 lightning EMP protectors Gas discharge tube (GDT) technology up to 2.5 GHz
lightning EMP protectors Gas discharge tube (GDT) technology up to 2.5 GHz Description HUBER+SUHNER gas discharge tube protectors make the best of the traditional spark gap protection principle for general