Fiber Optic Digital Extension Modules in 19 1RU Frame for Broadcast
|
|
- Joel Pope
- 5 years ago
- Views:
Transcription
1 Fiber Optic Digital Extension Modules in 19 1RU Frame for Broadcast User s Manual (BR-100) Doc No. : OSE-SDI BR100 / Rev
2 Contents Welcome! Product Description BR VT-1xx/VR AT-1xx/AR DX-1/DX EX-1/EX WM Installation BR VT-1xx/VR AT-1xx/AR DX-1/DX EX-1/EX Maintenance Technical Support and Service Warranty Information Appendix
3 Welcome! Congratulations on your purchase of the 19 1RU Power Unit, BR-100 and Fiber-Optic Extension modules, VT-1xx/VR-100, AT-1xx/AR-100, DX-1/DX-2, EX-1/EX-2 and WM-81. This manual contains information that will assist you in installing and operating the product. Product Description 1. BR-100 OPTICIS BR RU frame is an modular and systematic fiber-optic solution providing a variety of optical extenders with flexibility to handle multi-rate SDI formats such as 3G-SDI (SMPTE-424M), HD-SDI (SMPTE-292M), SD-SDI (SMPTE-259M) by 8-channel of CWDM, AES-3id audio compatible with SMPTE- 276 and Dolby-E, RS-232/422 and 100Base Ethernet. All extenders and dual power supplying modules are hot-swappable to allow system maintenance without any disruption or disconnection. All extenders are also available in a compact stand-alone type to be incorporated into any broadcast workflow from small studio and OB vans to master control room. BR-100 can deploy 1 slot sized extender up to 16 slots and has LED indicators on the front panel to monitor status of BR-100 and mounted extenders (ID, SD, Status, Power and FAN alarm). 2. VT-1xx/VR-100 Multi-rate SDI extender, VT-1xx/VR-100 can handle multi-rate SDI formats such as 3G-SDI (SMPTE-424M), HD-SDI (SMPTE-292M), SD-SDI (SMPTE-259M) and DVI-ASI by 8-channel of CWDM. Where XX refers to 2 digits in wavelength of transmitter, VT-133: 1330nm DFB-LD VT-135: 1350nm DFB-LD VT-137: 1370nm DFB-LD VT-143: 1430nm DFB-LD VT-145: 1450nm DFB-LD VT-147: 1470nm DFB-LD VT-149: 1490nm DFB-LD VT-151: 1510nm DFB-LD * VR-100 is commonly used receiver at any wavelengths. Fig. 1: VT AT-1xx/AR-100 AES-3id audio extender, AT-1xx/AR-100 transmits 8-channel of AES-3id signals by CWDM over one(1) fiber. It also has 8 wavelengths transmitters to be used with CWDM multiplexer/de-multiplexer. Where XX refers to 2 digits in wavelength of transmitter, AT-133: 1330nm DFB-LD AT-135: 1350nm DFB-LD AT-137: 1370nm DFB-LD AT-143: 1430nm DFB-LD AT-145: 1450nm DFB-LD AT-147: 1470nm DFB-LD AT-149: 1490nm DFB-LD AT-151: 1510nm DFB-LD * AR-100 is commonly used receiver at any wavelengths. Fig. 2: AT
4 4. DX-1/DX-2 RS-422/232 extenders, DX-1 and DX-2 transmit and receive RS-422 and RS-232 signals at 10Mbps over one(1) fiber. DX-1 and DX-2 must be used as a pair to make bi-directional serial data communication. DX-1 (1310nm FP-LD, 1550nm PD) DX-2 (1550nm FP-LD, 1310nm PD) 5. EX-1/EX-2 Ethernet extender, EX-1 and EX-2 transmit and receive Ethernet (100Base-Tx) signal over one (1) fiber. EX-1 and EX-2 must be used as a pair to make bi-directional Ethernet communication. DX-1 (1310nm FP-LD, 1550nm PD) DX-2 (1550nm FP-LD, 1310nm PD) Fig. 3: DX-1 Fig. 4: EX-1 6. WM-81 Multiplexer/De-multiplexer, WM-81 combines 8-different wavelength fiber-optic inputs into 1-fiber and also divides combined signal into 8-different wavelength outputs. User can configure 8 x SDI extenders and WM-81 in one BR-100 to transmit 8 different 3G-SDI signals over 1-fiber. It has 1330nm, 1350nm 1370nm, 1430nm, 1450nm, 1470nm, 1490nm and 1510nm filters. * Be sure to match each wavelength of transmitters to marked inlet of WM-81. For example, fiber optic output of VT-147 must be connected to inlet of WM-81, marked 1470nm. Fig. 5: WM
5 Installation 1. BR-100 Step 1 Connect two (2) AC plugs to inlets of BR-100. Fig. 6: Connect AC plugs to BR-100 BR-100 has load shared dual power suppliers to run the system stable without any disruption or disconnection from the power failure. So it is highly recommend to connect separate power source to AC IN1 and AC IN2 to avoid power failure problem. Step 2 Turn on PS1 and PS2 and check the status LED of Powers and Fans. Fig. 7: Frame status LEDs on front panel BR-100 has four (4) fans. Two fans are attached on the main frame and each of two fans are in the power supplier 1 (PS1) and power supplier 2 (PS2). If user turns on PS1 and PS2, all of power LEDs (PWR) and fan status LEDs (FAN) will be lit on. But in case of any failure of power or fan, it will be blackout (PWR) and blinking (FAN). For example, if PS 1 is not turned on or defective and PS 2 is turned on and normal; MAIN PS 1 PS 2 PWR ON OFF ON FAN ON Blinking ON - 5 -
6 Each power supplier has enough electric capacity to run fully configured BR-100 even though another one has been damaged or deactivated. In that case, just removed failed power supplier and replace it without power shut down (Hot swappable). Fig. 8: Hot-swapping of power supplier On the rear side of BR-100, it has 16 slots to adopt various extenders like VT-1xx/VR-100, AT- 1xx/AR-100, DX-1/DX-2, and EX-1 /EX-2. In case of WM-81, it does not need electric power because of no existence of active components in it. User can leave WM-81 as stand-alone box beside BR-100 or plug it into BR-100, if it has available space. Looking at the rear side, left side is slot 1 and right side is slot 16. Slot 1 Slot 16 Fig. 9: Slots for extenders on rear side Each extender has its own width that occupies the number of slots in BR-100 as below. Model name Number of slots occupancy VT-1xx, VR AR-1xx, AR DX-1, DX-2 3 EX-1, EX-2 2 WM-81 8 All extenders are Hot pluggable in BR-100 while turned on and also available in a compact standalone type to be incorporated into any broadcast workflow, if connected with supplied DC power adapter in shipping group. Once the extenders are plugged in BR-100, Slot status LED indicator shows the status of each slot as shown Fig. 10. For more detail information, please see appendix
7 Fig. 10: Slots status LEDs 2. VT-1xx/VR-100 Step 1 Plug fiber-optic SDI transmitter, VT-1xx to any slots of back side of BR-100, located in local side and fasten it by thumb screw. Then Power LED (PWR) will be lit ON (Red). Step 2 Connect the SDI source like camera output to SDI input of VT-1xx over BNC cable. Then optic video LED (LD) will be lit ON (Green). Step 3 Connect SC single mode fiber to SC receptacle of VT-1xx as shown in Fig. 11. Fig. 11: Plugging SC fiber-optic cable to VT-1xx Step 4 Plug fiber-optic SDI receiver, VR-100 to any slots of rear side of BR-100, located in remote side and fasten it by thumb screw. Then Power LED (PWR) will be lit ON (Red). Step 5 Connect the SDI display to SDI output of VR-100 over BNC cable. Step 6 Connect SC single mode fiber from VT-1xx to SC receptacle of VR-100. Then optic signal detect LED (SD) will be lit ON (Green)
8 Transmit multiple SDI signals (up to eight) over one fiber I. Let s assume to transmit 2 x SDI signals, we choose VT-143 and VT-151. Follow the step 1 to step 3 for VT-143 and VT-151. Fig. 12: Setup of 2xVT-1xx II. Place WM-81 (multiplexer) beside local BR-100. (WM-81 is composed of passive optical components. It does not need power) III. Connect the other side SC connector from VT-143 to inlet of WM-81, marked IV. Connect the other side SC connector from VT-151 to inlet of WM-81, marked V. Connect another SC single mode fiber to IN/OUT of WM-81 to send combined optical signal as shown in Fig 13. Fig. 13: WM-81 multiplexer to combine optical signal VI. Place another WM-81 (de-multiplexer) beside remote BR-100. VII. Follow the step 4 to step 5 for two units of VR-100 (Please remind that VR-100 is commonly used receiver at any wavelengths). VIII. To extract the signal, connect the other side SC connector from WM-81 (multiplexer, located in local site) to IN/OUT of WM-81 (de-multiplexer). IX. Connect the outlet of WM-81 (de-multiplexer), marked 1430 and one of SC receptacle of VR-100 over SC-SC fiber cable. X. Connect the outlet of WM-81 (de-multiplexer), marked 1510 and one of SC receptacle of VR-100 over SC-SC fiber cable
9 To understand it more clearly, please see the diagram as below. 8 x VT-1xx BR-100 in local site WM-81 8 x SDI inputs Up to 20Km 8 x VR-100 BR-100 in remote site WM-81 8 x SDI outputs Fig. 14: Connection with WM AT-1xx/AR-100 Step 1 Plug fiber-optic audio transmitter, AT-1xx to any slots of rear side of BR-100, located in local side and fasten it by thumb screw. Then power LED (PWR) will be lit on (Red) and if AT-1xx is normal, status LED (ST) will be lit on (Green). Step 2 Connect the audio sources (up to eight) to any of audio inputs of AT-1xx over BNC cable. Then audio input detect LEDs (From 1 to 8) will be lit on (Green). Fig. 15: 4 audio inputs and SC output of AT-1xx - 9 -
10 Step 3 Connect SC single mode fiber to SC receptacle of AT-1xx as shown in Fig. 15. Step 4 Plug fiber-optic audio receiver, AR-100 to any slots of rear side of BR-100, located in remote side and fasten it by thumb screw. Then power LED (PWR) will be lit on (Red). Step 5 Connect SC single mode fiber from AT-1xx to SC receptacle of VR-100. Then optic audio signal detect LED (SD) will be lit on (Green) and audio output detect LEDs (From 1 to 8) will be lit on (Green). Step 6 Connect the audio input devices to active audio outputs channels of AR-100 over BNC cables. To transmit more than eight audio signals (up to 8 x 8 = 64) over one fiber, please refer to CWDM transmission explained in AT-1xx/AR DX-1/DX-2 Step 1 To make bi-directional serial data extension link, DX-1 and DX-2 should be used as a pair. Plug fiberoptic serial data transceiver, DX-1 or DX-2 to any slots of rear side of BR-100, located in local side and fasten it by thumb screw. Then power LED (PWR) will be lit on (Red). Step 2 Connect the serial communication device and DX-1 or DX-2 over D-sub 9 cable. (Please see pin assignment of D-sub 9 connector below) D-sub 9 pin female connector on DX-1/DX Pin # For RS-232 For RS Data In+ 2 Data Out - 3 Data In Data In - 5 GND GND Data Out Data Out Fig. 16: Pin assignment of D-sub 9 connector Step 3 Connect SC single mode fiber to SC receptacle of DX-1 or DX-2 as shown in Fig. 16. Step 4 Plug fiber-optic serial data transceiver, DX-2 or DX-1 to any slots of rear side of BR-100, located in remote side and fasten it by thumb screw. Then power LED (PWR) will be lit on (Red). Step 5 Connect the serial communication device and DX-2 or DX-1 over D-sub 9 cables. Step 6 Connect SC single mode fiber from DX-1 or DX-2 from local site to SC receptacle of DX-2 or DX
11 Step 7 Once the connection done, optic signal detect LED (SD) will be lit on (Green) and TxD and RxD LED will be blinking (Green) while data in and out. Fig. 16: Connection of DX-1 5. EX-1/EX-2 Step 1 To make bi-directional Ethernet extension link, EX-1 and EX-2 should be used as a pair. Plug fiberoptic Ethernet transceiver, EX-1 or EX-2 to any slots of rear side of BR-100, located in local side and fasten it by thumb screw. Then power LED (PWR) will be lit on (Red). Step 2 Connect the Ethernet device and EX-1 or EX-2 over RJ45 cable. (EX-1 and EX-2 are worked with both of strait and twist type RJ45 cables) Step 3 Connect SC single mode fiber to SC receptacle of EX-1 or EX-2 as shown in Fig. 17. Fig. 17: Connection of EX-1 Step 4 Plug fiber-optic Ethernet transceiver, EX-2 or EX-1 to any slots of rear side of BR-100, located in remote side and fasten it by thumb screw. Then power LED (PWR) will be lit on (Red). Step 5 Connect the Ethernet device and EX-2 or EX-1 over RJ45 cables
12 Step 6 Connect SC single mode fiber from EX-1 or EX-2 from local site to SC receptacle of EX-2 or EX-1. Step 7 Once the connection done, optic signal detect LED (SD) will be lit on (Green) and TP and FX will be blinking while data in and out. Maintenance No special maintenance is required for the BR-100 and converters. Ensure that the cables and power modules are stored or used in a benign environment free from liquid or dirt contamination. There are no user serviceable parts. Refer all service and repair issues to Opticis. Technical Support and Service For commercial or general product support, contact your reseller. For technical service, contact Opticis by techsupp@opticis.com or visit its website at Warranty Information 1 (One) Year Warranty Opticis warrants BR-100 and extenders to be free from defects in workmanship and materials, under normal use and service, for a period of one (1) year from the date of purchase from Opticis or its authorized resellers. If a product does not work as warranted during the applicable warranty period, Opticis shall, at its option and expense, repair the defective product or part, deliver to customer an equivalent product or part to replace the defective item, or refund to customer the purchase price paid for the defective product. All products that are replaced will become the property of Opticis. Replacement products may be new or reconditioned. Any replaced or repaired product or part has a ninety (90) day warranty or the reminder of the initial warranty period, whichever is longer. Opticis shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to Opticis for repair under warranty or not. Warranty Limitation and Exclusion Opticis shall have no further obligation under the foregoing limited warranty if the product has been damaged due to abuse, misuse, neglect, accident, unusual physical or electrical stress, unauthorized modifications, tampering, alterations, or service other than by Opticis or its authorized agents, causes other than from ordinary use or failure to properly use the Product in the application for which said Product is intended. Dispose of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment
13 By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Appendix A. Slot status LEDs 1) Status LEDs on the front panel of BR-100 Slot ID SD Status ID and SD are status indicators of the plugged transmitter, receiver and transceiver. Case 1. Plugged extenders are Transmitter or Receiver such as VT-1xx/VR-100 or AT-1xx/AR- 100 ID ON, SD OFF: Transmitter plugged and operating condition ID OFF, SD ON: Receiver plugged and operating condition ID BLINK, SD OFF: Transmitter plugged and standby condition ID OFF, SD BLINK: Receiver plugged and standby condition Case 2. The plugged extenders are transceiver such as DX-1/DX-2 or EX-1/EX-2 ID ON, SD ON: Transceiver plugged ID OFF, SD OFF: Not plugged The meanings of Status are different depending on the plugged extender. VT-1xx EX-1 DX-1 AT-1xx VR-100 EX-2 DX-2 AR-100 ID ID x ID x x ID x x x x SD SD x SD x x SD ch1 ch2 ch3 ch4 Video FX TP x x x x ch5 ch6 ch7 ch8 2) Status LEDs Example 1) If the plugged extenders are Slot 1: VT-1xx, Slot2: AT-1xx, Slot7: DX-1, Slot10: EX-1, Slot 12: VT-1xx, Slot 13~14: VR-100 and Slot15: EX-1, the status LEDs would be as below. Slot ID SD Status
14 2) If the plugged extenders are Slot1~8: VT-1xx and Slot 9~16: VR-100, the status LEDs would be as below. Slot ID SD Status 3) If the plugged extenders are Slot1: AT-1xx, Slot6: AR-100, Slot11: DX-1, and Slot14: DX-2, the status LEDs would be as below. Slot ID SD Status
15 2015 Opticis Co., Ltd. All Rights Reserved Revision , Jan, 2015 Opticis Locations Headquarters Opticis Co., Ltd. 7F, 166, Jeongjail-ro, Bundang-gu, Seongnam-si, Gyunggi-do, South Korea Te l: +82 (31) Fax: +82 (31) For order support, please contact your Distributor or Reseller. For technical support, check with the Opticis web site or contact
User s Manual. Two (2) PCs Switchable Dual-head DVI Optical KVM Extender, KVMX-100-TR. Opticis Locations.
2015 Opticis Co., Ltd. All Rights Reserved Revision 1.1 2, Jan, 2015 www.opticis.com Two (2) PCs Switchable Dual-head DVI Optical KVM Extender, KVMX-100-TR User s Manual Headquarters Opticis Co., Ltd.
All-Optical Cable for Electrical Isolation. User s Manual (For M1-1000) Doc No. : OEC-D M / Rev2.3
All-Optical Cable for Electrical Isolation User s Manual (For M1-1000) Doc No. : OEC-D150102-M1-1000 / Rev2.3 Manual Contents Manual Contents 1-0 Welcome!, Product Description 1-1 System Requirements for
User s Manual. Multi-format to 1-fiber DVI converter, OMVC-200. Manual Contents.
Manual Contents www.opticis.com Multi-format to 1-fiber DVI converter, OMVC-200 User s Manual Manual Contents 1-0 Welcome! Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Self-EDID
User s Manual. VGA to 1-fiber DVI converter, VGDF-200. Manual Contents. dpd
dpd Manual Contents www.opticis.com VGA to 1-fiber DVI converter, VGDF-200 User s Manual Manual Contents 1-0 Welcome! Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Self-EDID
One (1) fiber Detachable HDMI Extender
ㅋㅕ Manual Contents Manual Contents 1-0 Welcome! Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Troubleshooting 1-5 Maintenance, Technical Support 1-6 Product Specifications
Optical VGA/Audio/RS-232 Extender User s Manual AVFX-100-TR
z Manual Contents www.opticis.com Optical VGA/Audio/RS-232 Extender User s Manual AVFX-100-TR Manual Contents 1-0 Welcome, Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 RS-232
Optical DVI Module. User s Manual M1-2R2-TR. Doc No. : OEB-D R2 / Rev2.6
Optical DVI Module User s Manual M1-2R2-TR Doc No. : OEB-D161219-2R2 / Rev2.6 Manual Contents Manual Contents 1-0 Welcome!, Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Troubleshooting,
User s Manual. 2-Fiber Detachable Dual Link DVI module, DDFX-100. Manual Contents.
Manual Contents www.opticis.com 2-Fiber Detachable Dual Link DVI module, Manual Contents 1-0 Welcome! Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Self-EDID Programming Procedure
Stretch HDMI TM. User s Manual HDFC-200. Doc No. : OEC-H M1 / Rev1.1
Stretch HDMI TM User s Manual HDFC-200 Doc No. : OEC-H170425-M1 / Rev1.1 Manual Contents Manual Contents 1-0 Welcome!, Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Troubleshooting,
Stretch HDMI TM. User s Manual HDFC-100. Doc No. : OEC-H M1 / Rev1.1
Stretch HDMI TM User s Manual HDFC-100 Doc No. : OEC-H161012-M1 / Rev1.1 Manual Contents Manual Contents 1-0 Welcome!, Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Troubleshooting,
Optical DVI Dual Link Extension Module
Manual Contents Manual Contents 1-0 Welcome!, Product Description 1-1 System Requirements for Setup 1-2 Installation Direct DDC 1-3 Installation Virtual DDC 1-5 Troubleshooting, Maintenance, Technical
Four (4) fibers Detachable HDMI Extender
ㅕ Four (4) fibers Detachable HDMI Extender Manual Contents Manual Contents 1-0 Welcome! Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Troubleshooting 1-5 Maintenance, Technical
DVI/USB/RS-232 and Audio Optical Extender. User s Manual for the M Opticis Locations. Headquarters
2015 Opticis Co., Ltd. All Rights Reserved Revision 1.6 2, Jan, 2015 www.opticis.com DVI/USB/RS-232 and Audio Optical Extender User s Manual for the M5-1003 Headquarters Opticis Co., Ltd. 7F, 166, Jeongjail-ro,
Two (2) fibers Detachable HDMI Extender
ㅕ Two (2) fibers Detachable HDMI Extender Manual Contents Manual Contents 1-0 Welcome! Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Troubleshooting 1-5 Maintenance, Technical
Digital Video/Audio Optical Extender User s Manual
Manual Contents Manual Contents 1-0 Welcome! Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Self-EDID Programming Procedure 1-5 Troubleshooting, Maintenance, Technical Support
CONT S HDMI and DVI to 3G-SDI Video Converter, New HDMS-200 Contents 1-1 Specification / Supporting resolution 1-2 Installation 1-4 Firmware update
CONTENTS HDMI and DVI to 3G-SDI Video Converter, New HDMS-200 Contents 1-1 Specification / Supporting resolution 1-2 Installation 1-4 Firmware update 1-5 Warranty Information 1-8 Troubleshooting 1-9 User
User s Manual (For M1-201SA-TR)
User s Manual (For M1-201SA-TR) Manual Contents Manual Contents 1-0 Welcome! Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Troubleshooting, Maintenance, Technical Support 1-5
User s Manual. 2-Fiber Detachable Dual Link DVI module, DDFX-100. Manual Contents.
Manual Contents www.opticis.com 2-Fiber Detachable Dual Link DVI module, User s Manual Manual Contents 1-0 Welcome! Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Self-EDID
Express All-Fiber DVI. User s Manual (For M1-1000)
Express All-Fiber DVI User s Manual (For M1-1000) Manual Contents Manual Contents 1-0 Welcome!, Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Troubleshooting, Maintenance,
Stretch USB TM. User s Manual (For Windows and Mac Systems) Manual Contents
Manual Contents Manual Contents 1-0 Welcome!, Product Description (2 Pages) 1-1 System Requirements for Setup 1-2 Installation 1-3 Troubleshooting, Maintenance, Technical Support 1-4 Product Specifications
User Manual. OLC II Fiber Optic DVI Extension Cable. Dtrovision Locations. Dtrovision LLC 9A Bergen Turnpike Little Ferry, NJ 07643
2009 Dtrovision Co., Ltd. All Rights Reserved Revision 1.0 2009 OLC II Fiber Optic DVI Extension Cable User Manual Dtrovision LLC 9A Bergen Turnpike Little Ferry, NJ 07643 U.S.A Dtrovision Locations Dtrovision
1-Fiber Detachable DVI module, DVFX-110
Manual Contents www.opticis.com 1-Fiber Detachable DVI module, User s Manual Manual Contents 1-0 Welcome! Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Self-EDID Programming
Stretch FireWire TM. User s Manual M4-200 & 201. Manual Contents.
Manual Contents www.opticis.com Manual Contents 1-0 Welcome!, Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Troubleshooting, Maintenance, Technical Support 1-6 Product Specifications
User Manual. OLC II Fiber Optic DVI Extension Cable
2013 Dtrovision Co., Ltd. All Rights Reserved Revision 2.0 2013 OLC II Fiber Optic DVI Extension Cable User Manual PureLink TM 535 East Crescent Ave Ramsey, NJ 07446 Tel: 201.488.3232 Fax: 201.621.6118
Wireless HDMI Extender, HDWX-100-TR
Ver. 2.0 WWW.OPTICIS.COM Wireless HDMI Extender, HDWX-100-TR User s Manual Doc No. : OE-HW150102 / Rev2.0-1 - Contents Welcome!...- 3 - Product Description...- 3 - Shipping Group...- 3 - Supporting Resolutions...-
Digital Video/Audio and Serial I/O Optical Extender. User s Manual for the M5-2A2-TR. Manual Contents.
Manual Contents www.opticis.com Manual Contents 1-0 Welcome, Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Troubleshooting, Maintenance, Technical Support 1-6 Product Specifications
Optical DVI Dual Link Extension Module
Manual Contents Manual Contents 1-0 Welcome!, Product Description 1-1 System Requirements for Setup 1-2 Installation Direct DDC 1-3 Installation Virtual DDC 1-5 Troubleshooting, Maintenance, Technical
DVI/USB/RS-232 and Audio Optical Extender. User s Manual for the M Opticis Locations. Headquarters
2011 Opticis. All Rights Reserved Revision 1.3 www.opticis.com DVI/USB/RS-232 and Audio Optical Extender User s Manual for the M5-1003 Headquarters Opticis Co., Ltd. Opticis Locations #304, Byucksan Technopia,
Optical DVI Daisy-chain Extender
Manual Contents Manual Contents 1-0 Welcome!, Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Troubleshooting, Maintenance, Technical Support 1-5 Product Specifications 1-6 Warranty
Wireless HDMI Extender, HDWX-100-TR
Ver. 1.2 WWW.OPTICIS.COM Wireless HDMI Extender, HDWX-100-TR User s Manual Doc No. : OE-HW130903 / Rev1.2-1 - Contents Welcome!...- 3 - Product Description...- 3 - Shipping Group...- 3 - Supporting Resolutions...-
DVI-DOC. Digital Signal Isolator. Owner s Manual
DVI-DOC Digital Signal Isolator Owner s Manual PureLink TM 535 East Crescent Avenue Ramsey, NJ 07446 USA Tel: +1.201.488.3232 Fax: +1.201.621.6118 E-mail: sales@purelinkav.com www.purelinkav.com For order
SPIDER TM. User s Manual. 1x4/1x8 HDMI Distributor ( / ) Contents. Contents 1-1. Introduction 1-2. Specification 1-3
Contents Contents 1-1 Introduction 1-2 SPIDER TM 1x4/1x8 HDMI Distributor (25-0334/25-0336) Specification 1-3 Product picture(25-0334) 1-4 Product picture(25-0336) 1-5 Features 1-6 Installation 1-7 Installation(25-0334)
1. Digital extender logo is our own trademark of RTcom USA.,Inc.
Total Digital Connectivity Solutions User s Manual 1x2 HDMI Distribution Amplifier HD-D102N Cautions: 1. Digital extender logo is our own trademark of RTcom USA.,Inc. 2. Any of the products may be changed
DVI LINK OC Cable. User Manual. Fiber Optical DVI Extension System. Dtrovision LLC
DVI LINK OC Cable Fiber Optical DVI Extension System User Manual Dtrovision LLC 131 Main Street, Suite 150 Hackensack, NJ 07601 USA Tel: +1.201.488.3232 Fax: +1.781.207.0351 Email: support@dtrovision.com
User Manual. VGA I DVI-D / HDMI to Single Cat Transmitter Universal Wall Interface. Model Name: UWITX. Total Digital Connectivity Solutions
User Manual Total Digital Connectivity Solutions VGA I DVI-D / HDMI to Single Cat Transmitter Universal Wall Interface Model Name: UWITX Cautions: 1. Digital Extender logo is our own trademark of RTcom
4K HDMI IPKVM Extender, IPKVM-500-ED. User s Manual
WWW.OPTICIS.COM 4K HDMI IPKVM Extender, IPKVM-500-ED User s Manual Doc No. : OIPKVM-D160322 / Rev1.0-1 - Index 1. Product Description...- 3-2. Main Features...- 4-3. Supporting Video Resolutions for Input
SE-DDL Dual Link DVI EDID Emulator & Equalizer Owner s Manual
SE-DDL Dual Link DVI EDID Emulator & Equalizer Owner s Manual PureLink TM 535 East Crescent Ave Ramsey, NJ 07446 Tel: 201.488.3232 Fax: 201.621.6118 Website : www.purelinkav.com E-mail : info@purelinkav.com
UHD-120 Owner s Manual 1 x 2 4K HDMI Distribution Amplifier
UHD-120 Owner s Manual 1 x 2 4K HDMI Distribution Amplifier PureLink TM 535 East Crescent Avenue Ramsey, NJ 07446, USA Tel: 201.488.3232 Fax: 201.621.6118 E-mail: info@purelinkav.com www.purelinkav.com
1-Fiber Detachable DVI module, DVFX-100
Manual Contents www.opticis.com 1-Fiber Detachable DVI module, User s Manual Manual Contents 1-0 Welcome, Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Self-EDID Programming
TRENDnet User s Guide. Cover Page
Cover Page Table of Contents Contents Product Overview... 2 Package Contents... 2 Features... 2 Product Hardware Features... 3 Application Diagram... 4 Installation - Hardware... 4 Adapter... 4 Fiber Cable...
Instruction Manual MX2-MM-LX-SC MXR2-MM-LX-SC MX2-SM-LX-SC MXR2-SM-LX-SC Media Converter
Instruction Manual MX2-MM-LX-SC MXR2-MM-LX-SC MX2-SM-LX-SC MXR2-SM-LX-SC Media Converter Copyright 2008, American Fibertek, Inc. 1107JD Table of Contents Functional Description... 3 Installation... 3 MX2
Separate Video from Audio and Peripheral Data
VelocityKVM Thinklogical s VelocityKVM systems offer best-in-class fiber optic performance with advanced video, audio and peripheral capabilities. VelocityKVM extenders offer 6.25Gbps bandwidth, to achieve
OPERATOR MANUAL OSD461A/OSD463A AUDIO FIBER OPTIC TRANSMISSION SYSTEM
OPERATOR MANUAL OSD461A/OSD463A AUDIO FIBER OPTIC TRANSMISSION SYSTEM OSD461A/OSD463A AUDIO FIBER OPTIC TRANSMISSION SYSTEM Document No. 101052 Rev. 01 PAGE 2 INDEX 1 1 TECHNICAL SUMMARY... 4 1.1 BRIEF
Instruction Manual RT-91685SL RR-91685SL Sixteen Channel Video Multiplexer With Two Bi-directional Data Channels
Instruction Manual RT-91685SL RR-91685SL Sixteen Channel Video Multiplexer With Two Bi-directional Data Channels Copyright 2007, American Fibertek, Inc. 0501JD Table of Contents Functional Description...3
TC1880 Series. 4/5/6/8 Channel RS-232 FIBER OPTIC MICRO MUX User's Manual
Series 4/5/6/8 Channel RS-232 FIBER OPTIC MICRO MUX MODEL: S/N: DATE: Notice! Although every effort has been made to insure that this manual is current and accurate as of date of publication, no guarantee
3.5 TFT LCD CCTV Service Viewer with Wristband LCD35SV
User Manual 3.5 TFT LCD CCTV Service Viewer with Wristband LCD35SV LCD35SV is a type of product that summarizes views of first-line safety engineers and it is developed specially for technical personnel
RC702-FX Ethernet over SDH User Manual
RC702-FX Ethernet over SDH User Manual Raisecom Technology Co., Ltd 1. Caution Please carefully read the following precautions before installing and deploying RC702-FX equipment, and operate strictly according
Instruction Manual Series 46 PoE Ethernet Fiber Optic Transceivers
Instruction Manual Series 46 PoE Ethernet Fiber Optic Transceivers 10/01/2012 JPK Table of Contents INTRODUCTION... 3 FUNCTIONAL DESCRIPTION... 3 MODULE INSTALLATION... 3 PoE POWER SUPPLY INSTALLATION...
1-Fiber Detachable DVI module, DVFX-100
1-Fiber Detachable DVI module, DVFX-100 DATA SHEET Contents Description Features Applications Technical Specifications Functions Drawing Fiber Connection DVI Pin Description Revision History OPTICIS HQ
TC /100Base-T Ethernet Fiber Optic Switch User's Manual. 4 Ethernet 10/100Base-T Auto-Sensing Twisted Pair Ports with RJ-45 Connectors
TC3705 10/100Base-T Ethernet Fiber Optic Switch User's Manual 1. Features 4 Ethernet 10/100Base-T Auto-Sensing Twisted Pair Ports with RJ-45 Connectors 1 Fiber Optic 100Base-FX Port MDI/MDIX Auto Detection
Fast Ethernet Converter. User Guide MICROSENS
Fast Ethernet Converter User Guide MICROSENS Rev.1.25 Jan-2010 Content Introduce... 1 Features... 2 Package Contents... 3 Hardware Description... 4 Front Panel... 4 Ports... 5 LED Indicators... 5 DIP-switch...
1-Fiber Detachable DVI module, DVFX-110
1-Fiber Detachable DVI module, DVFX-110 DATA SHEET Contents Description Features Applications Technical Specifications Functions Drawing Fiber Connection DVI Pin Description OPTICIS HQ Opticis Co., Ltd.
Technical Specification. for. 10 Gbps SFP+ Checker
Technical Specification for 10 Gbps SFP+ Checker Contents 1. General Description...1 2. Features...1 3. Applications...2 4. Specification...2 5. Elements & Operating Instructions...3 6. Maintenance...5
CMSA-100 Manual. Cinema Media Server Automation
CMSA-100 Manual Cinema Media Server Automation 181 Bonetti Drive San Luis Obispo, CA 93401-7397 USA Phone: +1 805 549 0161 Fax: +1 805 549 0163 www.uslinc.com Table of Contents 1. Safety Notice... 3 2.
100Base-FX to 10/100Base-TX. PoE. Media Converter. FCU-1802Px. User s Manual
100Base-FX to 10/100Base-TX PoE Media Converter FCU-1802Px User s Manual Trademarks Copyright Antaira Technologies 2013. Contents subject to revision without prior notice. Antaira is a registered trademark
DP400 HD-SDI to SDI Encoder/Decoder using DIRAC PRO by NuMedia
DP400 HD-SDI to SDI Encoder/Decoder using DIRAC PRO by NuMedia The DP-400 range of products provides an optimum solution for the transport of SD & HD-SDI video over a variety of interfaces including SDI/DVB
INSTRUCTION MANUAL FOR MODEL IOC537 LOW LATENCY FIBER OPTIC TRANSMIT / RECEIVE MODULE
210 South Third Street North Wales, PA USA 19454 (T) 215-699-2060 (F) 215-699-2061 INSTRUCTION MANUAL FOR LOW LATENCY FIBER OPTIC TRANSMIT / RECEIVE MODULE i TO THE CUSTOMER Thank you for purchasing this
User Manual Revision English
Document code: MN67152_ENG Revision 1.002 Page 1 of 17 User Manual Revision 1.002 English HD67152-A1 DeviceNet Master / Modbus TCP Slave - Converter (Order Code: HD67152-A1 HD67152-B2) for Website information:
16x16 Multicast supportable HDMI / DVI IPKVM Extender, IPKVM-310-ED
WWW.OPTICIS.COM 16x16 Multicast supportable HDMI / DVI IPKVM Extender, IPKVM-310-ED User s Manual Front Back The design can be chaned without notice Doc No. : OIPKVM-D150911 / Rev1.4-1 - Contents Welcome...
10G SFP+ Checker 2012 VER B. Page 1 of 9 3F-5, No. 30 Taiyuan Street, Chupei City, Hsinchu County 302, Taiwan
10G SFP+ Checker Page 1 of 9 Copyright 2012, reserves the right to modify specifications without prior notice Table of Contents 1. Description and Features..... 3 2. Specification..... 4 3. Element & Operating
USER MANUAL. Kramer Electronics, Ltd. Models:
Kramer Electronics, Ltd. USER MANUAL Models: VM-10FW, 1:10 FireWire Distributor/Hub VM-15FW, 1:15 FireWire Distributor/Hub VM-20FW, 1:20 FireWire Distributor/Hub Contents Contents 1 Introduction 1 2 Getting
ST-2FODVI-LC DVI Extender via Fiber Optic Cable Installation and Operation Manual
XTENDEX Series DVI Extender via Fiber Optic Cable Installation and Operation Manual FIBER-D-LCLC-50-xxM (Sold Separately) MAN115 Rev Date 09/1/2017 TRADEMARK XTENDEX is a registered trademark of Network
Preface. Media Converter
Preface This manual describes how to install and use the Ethernet Media Converter with the link-fault-pass-through function. The Converter introduced here provides one channel media conversion between
Kramer Electronics, Ltd. USER MANUAL. Model: RC-52N. Room Controller
Kramer Electronics, Ltd. USER MANUAL Model: RC-52N Room Controller Contents Contents 1 Introduction 1 2 Getting Started 1 3 Overview 2 4 Your RC-52N 3 4.1 The RC-52N Front Panel 3 4.2 The RC-52N Rear Panel
6100E Series DIGITAL FIBER OPTIC MULTI-CHANNEL AUDIO TRANSPORT SYSTEM
00E Series DIGITAL FIBER OPTIC MULTI-CHANNEL AUDIO TRANSPORT SYSTEM WITH DATA OPTIONS BCI reserves the right to make changes to the products described herein without prior notice or consent. No liability
Owner s Manual. Media Converters
Owner s Manual Media Converters Models: N784-001-SC & N784-001-ST Overview 2 Package Contents 2 Model Description 2 Wiring the Power Inputs 3 Communication Connection 4 DIP Switch Setting 5 Link Fault
UTAH-100/XHDA SERIES
Utah Sandar AS User Manual & Installation Guide UTAH-100/XHDA SERIES SD & HD3G Digital Distribution 1:4 & 1:8 CONTENTS CONTENTS... 2 INTRODUCTION... 3 WARRANTY... 3 DOCUMENT REVISION HISTORY... 3 SAFETY
FB-10/100MMC Series Managed/Unmanaged. 10/100Mbps Fiber Media Converter User Manual
FB-10/100MMC Series Managed/Unmanaged 10/100Mbps Fiber Media Converter User Manual (Version 1.5) Beijing Fibridge Co., Ltd. Content 1. Overview... 3 2. Features... 3 2.1. Hardware Features... 3 2.2. Software
User Manual Revision English
Document code: MN67140_ENG Revision 1.011 Page 1 of 18 User Manual Revision 1.011 English DeviceNet Slave / Modbus TCP Slave - Converter (Order Code: HD67140-A1 HD67140-B2) for Website information: www.adfweb.com?product=hd67140
5U CWDM Managed Platform SML-5000
CWDM Managed Platform 5U CWDM Managed Platform 5000 The SigmaLinks5000 is a flexible, cost-effective optical transport system, designed to multiplex, de-multiplex and switch high-speed data for storage,
KUMO. Compact SDI Routers
Compact SDI Routers Compact Single Link 12G and 3G SDI Routers Compact, robust and built for critical environments, KUMO 12G-SDI and KUMO 3G-SDI routers offer flexibility and quality that exceeds SMPTE
PRICE LIST 2015 TEL: (May 2015) Broadcasting Fiber Optic Transmission. VGA, DVI, HDMI, SDI Vedeo Transmission Fiber Optic
COMMUNICATION PRODUCTS Broadcasting Fiber Optic Transmission VGA, DVI, HDMI, SDI Vedeo Transmission Fiber Optic Telephone Extender Video Transmission HD-SDI Video Transmission Fiber Optic PRICE LIST 2015
MODEL No. SW1X8 RS422 SWITCHER
12843 Foothill Blvd. Suite C Sylmar, California 91342 V: 818.898.3380 F: 818.898.3360 sales@dnfcontrols.com MODEL No. SW1X8 RS422 SWITCHER User Manual TABLE OF CONTENTS I. REVISION HISTORY... 2 II. INTRODUCTION...
Full HD 1920x1200 DVI USB Matrix Extender over IP
Full HD 1920x1200 DVI USB Matrix Extender over IP IP-controlled matrix switching 1920x1200 DVI USB extension Model No. : DSE-1025 DSE-1025 is the state-of-the-art Over-IP DVI USB Matrix Extender which
General and Copyright Notice Warranty OmniConverter Limitation of Warranty Environmental Notices User Manual
OmniConverter GPoE+/Sx Unmanaged 8-Port PoE/PoE+ Switch User Manual General and Copyright Notice This publication is protected by U.S. and international copyright laws. All rights reserved. The whole or
F8008. Fiber Modem for up to 4E1 /8E1 +RS232+Ethernet. + optional V.35/QFXS/QFXO
F8008 Fiber Modem for up to 4E1 /8E1 +RS232+Ethernet + optional V.35/QFXS/QFXO Description F8008 is a fiber optical multiplexer of new generation different from the traditional PDH, multiplexing 1 full
10/100BASE-TX to 100BASE-FX Media Converter. User s Guide. Rev. 01 (JUN. 2002) 1907M110MM16003 RECYCLABLE
10/100BASE-TX to 100BASE-FX Media Converter User s Guide Rev. 01 (JUN. 2002) 1907M110MM16003 RECYCLABLE TABLE OF CONTENTS TABLE OF CONTENTS... 2 INTRODUCTION... 3 ABOUT MEDIA CONVERTER...3 PRODUCT FEATURES...3
INDUSTRIAL 1000BASE-T TO 1000BASE-X MEDIA CONVERTERS. KCD-400 Series. Installation Guide
INDUSTRIAL 1000BASE-T TO 1000BASE-X MEDIA CONVERTERS KCD-400 Series Installation Guide DOC.060227-KCD-400-1- (C) 2005 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced
OPERATOR MANUAL OSD860 SERIES DIGITAL 2/4/8 CHANNEL VIDEO/AUDIO/DATA/IP FIBER OPTIC MULTIPLEXER
OPERATOR MANUAL OSD860 SERIES DIGITAL 2/4/8 CHANNEL VIDEO/AUDIO/DATA/IP FIBER OPTIC MULTIPLEXER 1 TECHNICAL SUMMARY... 2 1.1 PRODUCT DESCRIPTION... 2 1.1.1 APPLICATIONS... 3 1.1.2 FEATURES AND BENEFITS...
Kramer Electronics, Ltd. USER MANUAL. Model: VA-1DVIN. Virtual EDID
Kramer Electronics, Ltd. USER MANUAL Model: VA-1DVIN Virtual EDID Contents Contents 1 Introduction 1 2 Getting Started 1 3 Overview 2 3.1 Defining EDID 3 4 Your VA-1DVIN Virtual EDID 3 5 Connecting the
Owner s Manual. Media Converters Models: N SC & N ST
200605219 93-2565 N784 SMC OM.qxd 6/7/2006 3:54 PM Page 1 Warranty Registration Register online today for a chance to win a FREE Tripp Lite product! www.tripplite.com/warranty Owner s Manual Media Converters
T-Series. High Reliability - Rack Space Saving KVM Extension Solution. The Logical Solution - Modular KVM Extension - DVI and SDI Support in One Unit
MRTS Technology T-Series High Reliability - Rack Space Saving KVM Extension Solution T-4200 Chassis Dual Interface Modules Available Modules: Module 4 - One DVI display Module 5 - One DVI or RGB display
F2238A and F2245A Fiber-Optic EIA-530/MIL-STD Modem Technical Manual
F2238A and F2245A Fiber-Optic EIA-530/MIL-STD-188-114 Modem Technical Manual Revision C October 2013 VERSITRON, Inc. 83 Albe Drive / Suite C Newark, DE 19702 www.versitron.com PROPRIETARY DATA All data
DATA SHEET. Two (2) PCs Switchable Dual-head DVI Optical KVM Extender, KVMX-100-TR
DATA SHEET Two (2) PCs Switchable Dual-head DVI Optical KVM Extender, KVMX-100-TR Contents Description Features Applications Absolute Maximum Ratings Recommended Operating Conditions Electrical Power Supply
HD-3500 Series. HD Video, Audio, Data & Tally/GPIO Channels FEATURES
FEATURES w w 1 SDI, up to 3Gbs Supports SMPTE -424M -259M -292M -310M Ethernet EQ s and re-clocks w w 4 analog audio or 2 (AES to Base) Two 4-wires for intercom 3 data (RS232, 422, 485) 4 GPIO 1 1, 2 or
Instruction Manual RR-915C Video Receiver With Bi-directional Multi-Protocol Data And Bi-directional Contact Closure
Instruction Manual RR-915C Video Receiver With Bi-directional Multi-Protocol Data And Bi-directional Contact Closure Copyright 2012, American Fibertek, Inc. 0812JPK INSTALLATION AND OPERATION INSTRUCTIONS
2-Fiber Detachable Dual Link DVI module, DDFX-100
2-Fiber Detachable Dual Link DVI module, DDFX-100 DATA SHEET Contents Description Features Applications Technical Specifications Functions Drawing Fiber Connection DVI Pin Description OPTICIS HQ Opticis
Kramer Electronics, Ltd. USER MANUAL. Models: RC-2C, Wall Plate / RS-232 / IR Controller RC-2, Wall Plate / RS-232 Controller
Kramer Electronics, Ltd. USER MANUAL Models: RC-2C, Wall Plate / RS-232 / IR Controller RC-2, Wall Plate / RS-232 Controller Contents Contents 1 Introduction 1 2 Getting Started 1 3 Overview 2 4 Your RC-2C/RC-2
8 Chanel HD SDI Over Fiber. Transmitter and Reciever Extender. User Manual L-8SDI-FE-HD-TX/RX
8 Chanel HD SDI Over Fiber Transmitter and Reciever Extender User Manual L-8SDI-FE-HD-TX/RX Contents CHAPTER 1. INTRODUCTION... 2 1.1 OVERVIEW...2 1.2 FEATURE...2 1.3 APPLICATION...3 CHAPTER 2. L-8SDI-FE-HD-TX/RX
ECT-1-PoE+ & ECR-1-PoE+ Series Instruction Manual
ECT-1-PoE+ & ECR-1-PoE+ Series Instruction Manual Overview The ECT-1-PoE+ and ECR-1-PoE+ provide transmission of a 10/100Base-TX Ethernet signal over coaxial cable with PoE+ & PoC. This quick start guide
Compact SDI Routers KUMO 1604 KUMO 1616 KUMO CP
C O N V E R T Compact SDI Routers KUMO 1604 KUMO 1616 KUMO CP B e c a u s e i t m a t t e r s. KUMO Compact SDI Routers Compact SDI Routers 1616 Rear Panel 1604 Rear Panel KUMO compact SDI routers are
EXT-DVI-3600HD User Manual
EXT-DVI-3600HD User Manual www.gefen.com ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday through
PCMCIA Flash Card User Guide
R R PCMCIA Flash Card User Guide For the CoreBuilder 3500 System Introduction The CoreBuilder 3500 PCMCIA Flash Card is a 20 MB flash card that you can use to save your system software. When you have saved
Industrial 5-Port Fast Ethernet Switches with SFP Slot and optional 4 PoE PSE Ports. Basic Model: KSD-541 PoE Model: KSD-541-P. Installation Guide
Industrial 5-Port Fast Ethernet Switches with SFP Slot and optional 4 PoE PSE Ports Basic Model: KSD-541 PoE Model: KSD-541-P Installation Guide DOC.080104-1- (C) 2008 KTI Networks Inc. All rights reserved.
PoE Powered Gigabit Ethernet Media Converters 1000BASE-T TO 1000BASE-SX/LX. KGC-352 Series. Installation Guide
PoE Powered Gigabit Ethernet Media Converters 1000BASE-T TO 1000BASE-SX/LX KGC-352 Series Installation Guide DOC.070820-KGC-352-1- (C) 2007 KTI Networks Inc. All rights reserved. No part of this documentation
User Manual Revision English
Document code: MN67251_ENG Revision 1.001 Page 1 of 18 User Manual Revision 1.001 English NMEA 2000 / DeviceNet - Converter (Order Code: HD67251-A1 - HD67251-A3 - HD67251-A4) for Website information: www.adfweb.com?product=hd67251-a1
Omnitron Systems Technology, Inc. 1. iconverter. 19-Module Managed Power Chassis User s Manual
Omnitron Systems Technology, Inc. 1 iconverter 19-Module Managed Power Chassis User s Manual 27 Mauchly, #201, Irvine, CA 92618 Phone: (949) 250-6510; Fax: (949) 250-6514 2 Omnitron Systems Technology,
1-Fiber Detachable DVI module, DVFX-110
1-Fiber Detachable DVI module, DVFX-110 DATA SHEET Contents Description Features Applications Technical Specifications Functions Drawing Fiber Connection DVI Pin Description OPTICIS HQ Opticis Co., Ltd.
Installation Guide. QBox-V6. Standalone/Spare V6 SDI QBox. Standalone/Spare V6 SDI QBox. Part No. A
Installation Guide Standalone/Spare V6 SDI QBox QBox-V6 Standalone/Spare V6 SDI QBox Part No. A9009-0004 EN www.autocue.com Copyright 2017 All rights reserved. Original Instructions: English All rights
OPERATOR MANUAL OSD157 FIBER OPTIC RS422/RS232 MODEM/MULTIPLEXER
/ OPERATOR MANUAL OSD157 FIBER OPTIC RS422/RS232 MODEM/MULTIPLEXER PAGE 2 OF 17 INDEX 1 1. TECHNICAL SUMMARY... 4 1.1 BRIEF DESCRIPTION... 4 1.1.1 OVERVIEW... 4 1.1.2 APPLICATIONS... 4 1.1.3 FEATURES AND