CARD-EDGE CONNECTORS (AXC)

Size: px
Start display at page:

Download "CARD-EDGE CONNECTORS (AXC)"

Transcription

1 XC FOR PC OR TO PC OR CR-EGE CONNECTORS (XC) Solder-dip type with flange Solder-dip type without flange FETURES 1. Long insertion and removal life. Thanks to our original contact shape, low insertion force is required and it is designed so that the contact position shifts at the start and end of card insertion. This reduces metal abrasion. Standard type: 1, times Low-insertion-force, long life type: 3, times Contact shape 3. Incorrect or reverse insertion can be prevented. y means of the key to prevent incorrect insertion and the slit fabrication of the printed circuit board, reverse insertion into a printed circuit board block or incorrect insertion into a similarly appearing printed circuit board block can be prevented. Compliance with RoHS irective Guide face PC board Contact PPLICTIONS Communication equipment Measuring equipment Factory automation related equipment Guide face contact position Final contact position 2. Low insertion types are also available. mong solder-dip types, low insertion types are available with approximately.49n, 5gf/ contact and less than 1/4 of the standard connector with a good fit feel. Insertion/removal force comparison between low insertion and standard types What is the low-insertion/long-life type? This connector employs a unique softinsertion construction with a step provided in the contact. Low insertion power (less than 3% of standard connector) and long life (over 3, insertion/removal times) is realized. Soft insertion construction with step provided in the contacting element Long Short 88.3N {9kgf} Insertion power Removal power 49.N {-5kgf} Standard connector Low profile connector 7.mm

2 ORERING INFORMTION XC 4: Card-edge connectors <No. of contacts (2 digits)> 34: 34 contacts 36: 36 contacts 44: 44 contacts 56: 56 contacts 6: 6 contacts 62: 62 contacts 72: 72 contacts 86: 86 contacts : 1 contacts <Mounting flange shape and type> 1: Without flange (Standard type) 2: With flange (Standard type) 4: Without flange (Low insertion force/long life type) 5: With flange (Low insertion force/long life type) <Terminal shape> : IP straight terminal XC 4 <Surface treatment (Contact portion/terminal portion)> 1: u plating.2 µm/sn plating (Standard type) 3: u plating.76 µm/sn plating (Low insertion force/long life type) PROUCT TLE Type Standard type Low insertion force/long life type Solder-dip straight terminals Solder-dip straight terminals Contact pitches 2.54mm 2.54mm Spaces between rows 5.8mm 5.43mm No. of contacts 6, 62 6, , 36 34, 36 Terminal shape Note) Each connector is available with or without flanges. Solder-dip straight terminal Solder-dip straight terminal PROUCT TYPES 1. Connector Standard type (solder-dip straight terminal) No. of No flange type Flange type Packing quantity contacts Part No. Part No. Inner carton Outer carton 34 XC43411 XC XC43611 XC XC44411 XC XC45611 XC XC4611 XC pcs. 62 XC46211 XC XC47211 XC XC48611 XC XC411 XC421 Note) The row pitch between solder-dip straight terminals of the low-insertionpower/long-life type is different from the card edge connector standard type. Low insertion force/long life type (solder-dip straight terminal) No. of No flange type Flange type Packing quantity contacts Part No. Part No. Inner carton Outer carton 34 XC43443 XC XC43643 XC XC44443 XC XC45643 XC XC4643 XC pcs. 62 XC46243 XC XC47243 XC XC48643 XC XC443 XC453 Low insertion force/long life type: 5.43mm Standard type: 5.8mm

3 XC 2. Keys (Standard type, low insertion force and long life type) Name SPECIFICTIONS 1. Characteristics (Standard type) Electrical Mechanical Life time Environmental Part No. Inner carton Packing quantity Outer carton Incorrect insertion prevention key XC81 5 pcs. 2 pcs. Item Specifications Conditions Rated current 3 Rated voltage 25V C reakdown voltage 1, V C for 1 min. etection current: 1m Insulation resistance Min. 1,MΩ at 5V C Contact resistance Max. 2mΩ Measured based on the HP4338 measurement method of JIS C 542 Insertion force (unit) Max. 4.45N {453.6gf} Measured by steel gauge with 1.78mm thickness and smoothness.1s. Measured by steel gauge with 1.37mm thickness and Removal force (unit) Min..279N {28.4gf} smoothness.1s after 3 times insertion of 1.78mm thickness gauge Holding force for contact Min. 9.81N {1kgf} Insertion and removal life 1, times Replace the PC board within 2, times. mbient temperature 55 C to +15 C No freezing at low temperatures Soldering temperature resistance 26 C: Within 1 sec.; 3 C: Within 5 sec. 35 C: Within 3 sec. 2. Characteristics (Low insertion force/long life type) Item Specifications Conditions Rated current 2 Rated voltage 25V C Electrical reakdown voltage 1, V C for 1 min. etection current: 1m Insulation resistance Min. 1,MΩ at 5V C Contact resistance Max. 2mΩ Measured based on the HP4338 measurement method of JIS C 542 Mechanical Life time Environmental Insertion force (Composite) Removal force (Composite) Max. 39.2N {4.kgf} (1 contacts) Max. 28.4N {2.9kgf} (72 contacts) Max. 13.7N {1.4kgf} (34 contacts) Min. 5.88N {.6kgf} (1 contacts) Min. 4.21N {.43kgf} (72 contacts) Min. 1.96N {.2kgf} (34 contacts) The contact face of the 1.6±.15 mm PC board is gold plated. Guide portion of PC board is chamfered 15. Insertion and removal life 3, times Replace the PC board within 2, times. mbient temperature 55 C to +15 C No freezing at low temperatures Soldering temperature resistance 26 C: Within 1 sec.; 3 C: Within 5 sec. 35 C: Within 3 sec. 3. Material and surface treatment Material Surface treatment Part name Low insertion force/ Standard type Long life type Standard type Low insertion force/long life type Molded portion Glass reinforced PT (UL94V-) Contact Copper alloy 4. pplicable PC board Standard type, low insertion force and long life type Inserting PC board thickness: 1.6±.15mm Mounting PC board thickness: 1.6 to 2.4mm Pattern pitch: 2.54±.5mm Pattern width: 1.4mm Contact portion: u plating Contact portion: Ni plating on base, u plating (.2µm) on surface Terminal portion: Ni plating on base, Sn plating on surface Contact portion: Ni plating on base, u plating (.76µm) on surface Terminal portion: Ni plating on base, Sn plating on surface

4 XC IMENSIONS (Unit: mm) The C data of the products with a C ata mark can be downloaded from: 1. Standard type Without flange C ata E imension table (mm) No. of contacts E ± ±.25 Recommended PC board pattern (ottom view) () ±.1 () 2.54±.5 General tolerance: ± dia. 5.8±.5 With flange 3.3 dia. 4.3 E +.3 C pplicable PC board dimensions to 1.5 Key way.91± ±.1 ±.1 G±.1 1±.2 1.4± ± ± ± ±.25 General tolerance: ±.3 Recommended PC board pattern (ottom view) 2.54± dia. () 5.8±.5 imension table (mm) No. of contacts C E G C±.1 Mounting hole cut-out C±.1 M3 or 3.3 dia

5 XC 2. Low insertion force/long life type ) With flange type 3.3 dia. 4.3 E +.3 C ) Without flange type C ata ± ±.25 General tolerance: ±.3 Recommended PC board pattern (ottom view) ± ± dia. () 5.43±.5 Terminal pitches are different from standard type. Low insertion force/long life type : 5.43mm Standard type : 5.8mm C±.1 pplicable PC board dimensions 15 imension table (mm) No. of contacts C E G Note) imensions of,, E and G are common for both types. 2 Key way.91±.1.5 to ±.1 ±.1 G±.1 1±.2 1.4± ±.5 1.6±.15 2.

6 NOTES 1. Cautions regarding printed circuit board fabrication 1) ppropriate dimensions for the board insertion width should be provided for the connector connection section of the printed circuit board. If the clearance between the printed circuit board insertion width and that of the connector is large, defective contact or short circuit can be caused. The drawing for the printed circuit board pattern design should provide reference to the clearance as being small. Clearance Connector connection section oard insertion width (G) oard acceptance width (E) Printed circuit board Connector Clearance 2) The pattern shift of the front and back connector connection section of the printed circuit board should be within.2mm. 4) The proper thickness of printed circuit board should be used. 5) Care must be taken with printed circuit board warp. The extent of the warpage may be exacerbated when the electronic components are mounted on the printed circuit board due to the contraction of the solder on the board. For this reason, ensure that the maximum warp of the area where the connector is mated is.1mm. 2. Regarding insertion of printed circuit board 1) Care should be taken to avoid having any oil, flux, or other foreign matter adhere to the insertion section contact surface of the printed circuit board. Foreign matter can lead to defective contact. If such a condition exists, the adhering matter should be removed with alcohol, freon, or other suitable solvent. 2) Insert into connector at least 8.2 mm from the insertion edge of the PC board. XC 3. Regarding the operations for dip type soldering The dip type soldering operations should be carried out under the following conditions. 26 C Within 1 seconds 3 C Within 5 seconds 35 C Within 3 seconds For other details, please verify with the product specification sheets. PC board Min mm Max. 3) evelling should be provided without fail for the insertion width of the connector connection section. When the printed circuit board is inserted in the connector, the bevelling will keep distortion of the contacts and insertion force small, improving the insertion capability along with preventing defective contact due to dropping out of the printed circuit board end surface. Connector 3) y means of a groove fabricated at a designated position, a key (special accessory part) is inserted for the prevention of reverse insertion or incorrect insertion of a similarly appearing printed circuit board. mm 1 Standard type mm.5 to 1.5 Printed circuit board Low insertion force/long life type Max. 15 mm Max Printed circuit board.5 to

FOR CELLULAR PHONE; ULTRA LOW PROFILE TYPE FOR PORTABLE EQUIPMENT (0.5mm PITCH)

FOR CELLULAR PHONE; ULTRA LOW PROFILE TYPE FOR PORTABLE EQUIPMENT (0.5mm PITCH) FOR CELLULR PHONE; ULTR LOW PROFILE TYPE FOR PORTBLE EQUIPMENT (0.5mm PITCH) XR(3/5) SYSTEM CONNECTORS ULTR-LOW PROFILE TYPE (XR3) I/O CONNECTORS FOR PORTBLE EQUIPMENT (XR5) for portable equipment Receptacle

More information

FOR PC BOARD TO FLAT CABLE

FOR PC BOARD TO FLAT CABLE AXM FOR PC BOARD TO FLAT CABLE MIL CONNECTORS (AXM) Density mounting Long lever type Short lever type Compliance with RoHS Directive FEATURES 1. High density mounting is possible. Even with mounting right

More information

NARROW PITCH (0.4 mm) CONNECTORS F4S SERIES

NARROW PITCH (0.4 mm) CONNECTORS F4S SERIES NARROW-PITCH, THIN AN SLIM CONNECTOR FOR BOAR-TO-FPC CONNECTION FEATURES 1. Space-saving (3.6 mm widthwise) The required space is smaller than our F4 series (40-contact type): 27% smaller, 38% smaller

More information

SYSTEM CONNECTORS FOR W-CDMA

SYSTEM CONNECTORS FOR W-CDMA SYSTEM CONNECTORS COMPLINT WITH EIJ RC-5238 (CONNECTOR FOR IMT-2000 MOBILE PHONES) SYSTEM CONNECTORS FOR W-CDM Receptacle Signal 10 contacts with coaxial, with charging terminals ( type) Plug Signal 10

More information

SYSTEM CONNECTORS ULTRA-LOW PROFILE TYPE (AXR3) I/O CONNECTORS FOR PORTABLE EQUIPMENT (AXR5)

SYSTEM CONNECTORS ULTRA-LOW PROFILE TYPE (AXR3) I/O CONNECTORS FOR PORTABLE EQUIPMENT (AXR5) System connector ultra low profile 18, 22 and 24 contacts I/O connectors for portable equipment 18, 22, 24 and 26 contacts 50 contacts FOR CELLULR PHONE; ULTR LOW PROFILE TYPE FOR PORTBLE EQUIPMENT (0.5mm

More information

NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES

NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES Socket Header Compliance with RoHS Directive FETURES 1. The product lineup consists of the low profile of 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 7.0 mm, 8.0 mm, 11.5 mm, and 13.0 mm 14.0

More information

onlinecomponents.com

onlinecomponents.com YF53 For FPC/FFC* FPC connectors (0.5mm pitch) Back lock / Series New Low profile and space saving body of 1.0 mm high and mm deep (3.70 mm including the lever) and can have a minimum of four and two contacts

More information

The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment.

The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. Compliance with RoHS Directive The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. FEATURES 1. 2.5 mm wide ultra-slim two-piece connectors

More information

EXCELLENT FOR MASS PRODUCTION THESE SOP IC SOCKETS RESIST VIBRATION AND SHOCK

EXCELLENT FOR MASS PRODUCTION THESE SOP IC SOCKETS RESIST VIBRATION AND SHOCK EXCELLENT FOR MSS PRODUCTION THESE SOP IC SOCKETS RESIST VIRTION ND SHOCK SOP IC SOCKETS (600 mil contacts 1.27mm pitch) SSOP IC SOCKETS (600 mil contacts 0.8mm pitch) Compliance with RoHS Directive FETURES

More information

2.2 mm Ultra-slim body with the inherited high reliability

2.2 mm Ultra-slim body with the inherited high reliability For board-to-fpc Narrow pitch connectors DVNCED Series 0.4mm pitch 2.2 mm Ultra-slim body with the inherited high reliability 2011.07 panasonic-electric-works.net/ac XE1/XE2 For board-to-fpc Narrow pitch

More information

CS Series. Automation Controls Catalog

CS Series. Automation Controls Catalog utomation Controls Catalog For board-to-micro coaxial wire Micro coaxial connectors (Space saving) CS Series 2. with strong resistance to various environments provides high contact reliability and facilitates

More information

onlinecomponents.com

onlinecomponents.com 0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.

More information

FPC connectors (0.2mm pitch) Back lock

FPC connectors (0.2mm pitch) Back lock 0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with

More information

NARROW PITCH (0.4mm) CONNECTORS P4 SERIES

NARROW PITCH (0.4mm) CONNECTORS P4 SERIES Without soldering terminal With soldering terminal NARROW-PITH ONNTORS FOR BOARD-TO-BOARD AND BOARD-TO-FP ONNTION FATURS 1. 0.4 mm pitch and support for mated heights of up to 1.5 mm, 2.0 mm, 2.5 mm, 3.0

More information

For board-to-board. Narrow pitch connectors (0.5mm pitch)

For board-to-board. Narrow pitch connectors (0.5mm pitch) Discontinued Discontinued as as of of September September 30, 30, 013 013 For board-to-board Narrow pitch connectors (0.5mm pitch) P5KL Series 5.8mm 3.3mm Products are discontinued. FEATURES 1. Low profile

More information

Product Change Notice: Y5B/Y5BW Series FPC Connectors (0.5mm pitch) Back Lock

Product Change Notice: Y5B/Y5BW Series FPC Connectors (0.5mm pitch) Back Lock Product Change Notice: Y5B/Y5BW Series FPC Connectors (0.5mm pitch) Back Lock PEWA Ref # ACBD257 1.17.2014 About this Notice: Addition of a manufacturing plant. Effective Date: March 2014 Change Details:

More information

Narrow pitch connectors (0.8mm pitch)

Narrow pitch connectors (0.8mm pitch) For board-to-board Narrow pitch connectors (0.8mm pitch) P8 Series 5.88mm 6.83mm Socket Header RoHS compliant 3. Ideal for portable devices, the bellows-type contacts provide a strong resistance against

More information

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) 20 pins signal terminals used. With power terminal. 20 pins signal terminals can be reduced.

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) 20 pins signal terminals used. With power terminal. 20 pins signal terminals can be reduced. For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) A35US With Power Terminal 5. Power terminal type means power line is ensured without having to use signal line. Contributes to space savings New

More information

For FPC. FPC connectors (0.3mm pitch) Back lock. FEATURES 1. Slim (width: 3.15 mm, including the lever) and low profile design (height: 0.9 mm) 3.

For FPC. FPC connectors (0.3mm pitch) Back lock. FEATURES 1. Slim (width: 3.15 mm, including the lever) and low profile design (height: 0.9 mm) 3. 0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B/Y3BW Y3B Y3BW RoHS compliant FEATURES 1. Slim (width: 3.15 mm, including the lever) and low profile design (height: 0.9 mm) 3.15 Unit: mm 2. Mechanical

More information

Narrow pitch connectors (0.4mm pitch)

Narrow pitch connectors (0.4mm pitch) For board-to-board For board-to-fpc Narrow pitch connectors (0.4mm pitch) P4S Series FETURES 1. Space-saving (3.6 mm widthwise) Smaller compared to P4 series with soldering terminals (30 pin contacts):

More information

For board-to-board. Narrow pitch connectors (0.5mm pitch)

For board-to-board. Narrow pitch connectors (0.5mm pitch) For board-to-board Narrow pitch connectors (0.5mm pitch) P5K/ P5K 5.8mm 5.4mm Socket Socket 4.6mm 5.0mm Header Header Note: The external appearance and PC board pattern differs between the P5K and. RoHS

More information

Narrow pitch connectors (0.4mm pitch)

Narrow pitch connectors (0.4mm pitch) For board-to-board For board-to-fp Narrow pitch connectors (0.4mm pitch) P4 Series Without soldering terminals 5.1mm 3.96mm With soldering terminals FATURS 1. 0.4 mm pitch and support for mated heights

More information

A35P ORDERING INFORMATION. Narrow pitch connectors (0.35mm pitch) RoHS compliant. Rated current

A35P ORDERING INFORMATION. Narrow pitch connectors (0.35mm pitch) RoHS compliant. Rated current High current type For board-to-fpc Narrow pitch connectors (0.35mm pitch) A35P Rated current Number of power contacts Max. 4 pins Max. 8 pins Rated current Power contact Signal contact Total 1.5 A/pin

More information

For board-to-fpc. High Current Connectors. 20 pins signal terminals used. With power terminal. 20 pins signal terminals can be reduced.

For board-to-fpc. High Current Connectors. 20 pins signal terminals used. With power terminal. 20 pins signal terminals can be reduced. For board-to-fpc High Current Connectors A35US With Power Terminal 4. Power terminal type means power line is ensured without having to use signal line. Contributes to space savings New Power terminals

More information

PC/104, PC/104 Plus Specification

PC/104, PC/104 Plus Specification PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch

More information

P4S. High reliability, space saving type, 1.5 to 3.0 mm mated height

P4S. High reliability, space saving type, 1.5 to 3.0 mm mated height For board-to-board For board-to-fpc Narrow pitch connectors (0.4mm pitch) P4S High reliability, space saving type, 1.5 to 3.0 mm mated height FEATURES 1. TOUGH CONTACT construction provides high resistance

More information

XH5 SMT-compatible Connectors with a 1.27-mm Pitch

XH5 SMT-compatible Connectors with a 1.27-mm Pitch New Product Half-pitch SMT Connectors (oard to oard and oard to Cable Connectors) XH5 SMT-compatible Connectors with a -mm Pitch These SMT Connectors can be mounted on the back surfaces of circuit boards.

More information

Narrow pitch connectors (0.4mm pitch)

Narrow pitch connectors (0.4mm pitch) For board-to-board For board-to-fpc AXK7, 8 Narrow pitch connectors (0.4mm pitch) P4 Series Without soldering terminals 5.1mm 5.1mm 3.96mm With soldering terminals 3.96mm Compliance with RoHS Directive

More information

For board-to-fpc. Narrow pitch connectors (0.35mm pitch)

For board-to-fpc. Narrow pitch connectors (0.35mm pitch) For board-to-fpc Narrow pitch connectors (0.35mm pitch) A35S Contributes to device miniaturization and advanced functionality with 2.5 mm width, 0.35 mm pitch and 0.8 mm mated height! FEATURES 1. 0.35

More information

Narrow pitch connectors (0.4mm pitch) Radiation noise reduced by multi-point ground and shield construction

Narrow pitch connectors (0.4mm pitch) Radiation noise reduced by multi-point ground and shield construction For board-to-board For board-to-fpc Narrow pitch connectors (0.4mm pitch) P4S Shield type Radiation noise reduced by multi-point ground and shield construction FEATURES 1. Radiation noise is reduced thanks

More information

For board-to-fpc. Narrow pitch connectors (0.4mm pitch)

For board-to-fpc. Narrow pitch connectors (0.4mm pitch) For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4S Being 2.5 mm in width, it facilitates ever-increasing device miniaturization and advanced functionality! FEATURES 1. TOUGH CONTACT construction

More information

For board-to-board. Narrow pitch connectors (0.5mm pitch)

For board-to-board. Narrow pitch connectors (0.5mm pitch) Automation Controls Catalog Partly to Be Discontinued: P5KS 120, 130, 160 pin contacts For board-to-board Narrow pitch connectors (0.5mm pitch) P5K, P5KS Series P5K P5KS 5.8mm 5.4mm 4.6mm 5.0mm Note: The

More information

RX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm

RX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible

More information

NEW ITEM THERMOPLASTIC A - TYPE FLANGE 3 CONTACT

NEW ITEM THERMOPLASTIC A - TYPE FLANGE 3 CONTACT NEW ITEM AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A - TYPE FLANGE 3 CONTACT Features: Thermoplastic Shell Industry standard PC footprints. Vertical or Horizontal PC mounting. Precision machined pin contacts.

More information

For board-to-fpc. Narrow pitch connectors (0.4mm pitch) FEATURES 1. Slim body width of 2.0/2.2 mm contributes to space-saving.

For board-to-fpc. Narrow pitch connectors (0.4mm pitch) FEATURES 1. Slim body width of 2.0/2.2 mm contributes to space-saving. For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4US FEATURES 1. Slim body width of 2.0/2.2 mm contributes to space-saving. Soldering terminals at each corner 2. ensures high resistance to various

More information

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) Excellent contact reliability and mating in a super miniature size (width 1.

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) Excellent contact reliability and mating in a super miniature size (width 1. For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) S35 Excellent contact reliability and mating in a super miniature size (width 1.7 mm) FEATURES 1. Slim: width 1.7mm 2. Low profile construction:

More information

For board-to-fpc. Narrow pitch connectors (0.4mm pitch)

For board-to-fpc. Narrow pitch connectors (0.4mm pitch) For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4S 2.5mm 2.0mm Socket Header RoHS compliant FEATURES 1. Width 2.5 mm slim two-piece type connector Compact and slim structure contributes overall

More information

For board-to-board. Narrow pitch connectors (0.8mm pitch)

For board-to-board. Narrow pitch connectors (0.8mm pitch) To Be Discontinued For board-to-board Narrow pitch connectors (0.8mm pitch) P8 5.88mm 6.83mm Socket Header RoHS compliant FEATURES 1. The product lineup includes low profile heights of 3.0 mm, 3.5 mm,

More information

Narrow pitch connectors (0.35mm pitch)

Narrow pitch connectors (0.35mm pitch) AXT1, 2 For board-to-board For board-to-fpc Narrow pitch connectors (0.35mm pitch) P35S Series FEATURES 1. Small size 0.35 mm pitch contributes to device miniaturization. Smaller compared to P4S series

More information

Narrow pitch connectors (0.4mm pitch)

Narrow pitch connectors (0.4mm pitch) AXT5, 6 For board-to-fpc Narrow pitch connectors (0.4mm pitch) F4S Series FEATURES 1. Space-saving (3.6 mm widthwise) Smaller compared to F4 series (40 pin contacts): 27% smaller, 38% smaller 3. Simple

More information

For board-to-fpc. Narrow pitch connectors (0.4mm pitch)

For board-to-fpc. Narrow pitch connectors (0.4mm pitch) For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4US Series FEATURES 1. Slim body width of 2.0 mm/2.2 mm contributes to space-saving. 2. A wide lineup contributes to the design freedom. 3. ensures

More information

Narrow pitch connectors (0.4mm pitch)

Narrow pitch connectors (0.4mm pitch) For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4S Series 2.5mm Socket 2.0mm Header FEATURES 1. 2.5 mm wide slim two-piece type connector Compact and slim structure contributes overall miniaturization

More information

For FPC. FPC/FFC connectors (0.2mm pitch) Back lock. Slim, 0.2 mm pitch and double top and bottom contacts construction

For FPC. FPC/FFC connectors (0.2mm pitch) Back lock. Slim, 0.2 mm pitch and double top and bottom contacts construction For FPC FPC/FFC connectors (0.2mm pitch) Back lock Y2B Slim, 0.2 mm pitch and double top and bottom contacts construction FEATURES 1. Slim (width: 3.15 mm) and low profile design 2. Double top and bottom

More information

For board-to-fpc. Narrow pitch connectors (0.4mm pitch)

For board-to-fpc. Narrow pitch connectors (0.4mm pitch) For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4US FEATURES 1. Slim body width of 2.0 mm/2.2 mm contributes to space-saving. 2. A wide lineup contributes to the design freedom. 3. ensures high

More information

XC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics

XC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics DIN-style Twin-contact Connectors Expanding the DIN Concept Mates with DIN connectors. Ideal for automated soldering because the Connectors sit on top of the board. Mounting dimensions of the DIN Style-1

More information

For board-to-board. Narrow pitch connectors (0.8mm pitch)

For board-to-board. Narrow pitch connectors (0.8mm pitch) Automation Controls Catalog For board-to-board Narrow pitch connectors (0.8mm pitch) P8 Series 5.88mm 6.83mm Socket Header RoHS compliant FEATURES 1. The product lineup includes low profile heights of

More information

For FPC. FPC/FFC connectors (0.3mm pitch) Back lock

For FPC. FPC/FFC connectors (0.3mm pitch) Back lock For FPC FPC/FFC connectors (0.3mm pitch) Back lock Y3BL 0.6 mm low profile, with soldering terminal type FEATURES 1. Low profile (0.6 mm) and slim design 2. Compatible with FPC 0.2 mm thickness 3. High

More information

Y3B/Y3BW. Slim, pitch 0.3 mm and double top and bottom contacts construction

Y3B/Y3BW. Slim, pitch 0.3 mm and double top and bottom contacts construction For FPC FPC/FFC connectors (0.3mm pitch) Back lock Y3B/Y3BW Slim, pitch 0.3 mm and double top and bottom contacts construction FEATURES 1. Double top and bottom contacts construction 2. Time and effort

More information

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch)

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) A35US FEATURES 1. 0.6 mm Mated Height with 2.2 mm width. 2. Proprietary Fine Fitting Construction Our proprietary design provides a comfortable and

More information

D2F. Ultra Subminiature Basic Switch with plenty of terminal variations. Model Number Legend. Ultra Subminiature Basic Switch

D2F. Ultra Subminiature Basic Switch with plenty of terminal variations. Model Number Legend. Ultra Subminiature Basic Switch Ultra Subminiature Basic Switch with plenty of terminal variations Incorporating a snapping mechanism made with two highly precise split springs that ensures long durability. Using insertion molded terminals

More information

Y3BC. Pitch 0.3 mm and double top and bottom contacts construction

Y3BC. Pitch 0.3 mm and double top and bottom contacts construction For FPC FPC/FFC connectors (0.3mm pitch) Back lock Y3BC Pitch 0.3 mm and double top and bottom contacts construction FEATURES 1. Double top and bottom contacts construction 2. Lever open/close operation

More information

FLZ CONNECTOR. 1Certified LR Connectors for FFC and FPC. Features. Specifications. Standards. 0.5mm

FLZ CONNECTOR. 1Certified LR Connectors for FFC and FPC. Features. Specifications. Standards. 0.5mm 0.5mm (.020") pitch FLZ CONNECTOR Connectors for FFC and FPC Emboss Tape Features Zero insertion force mechanism ZIF mechanism increases wear resistance and extends the connector's mating life. Heat resistant

More information

Narrow pitch connectors (0.35mm pitch)

Narrow pitch connectors (0.35mm pitch) AXE7, 8 For board-to-fpc Narrow pitch connectors (0.35mm pitch) A35S Series FEATURES 1. Small size (Terminal pitch: 0.35 mm, width: 2.5 mm and Mated height: 0.8 mm) When mated, the footprint is reduced

More information

For board-to-fpc. Narrow pitch connectors (0.35mm pitch)

For board-to-fpc. Narrow pitch connectors (0.35mm pitch) For board-to-fpc AXT7, 8 Narrow pitch connectors (0.35mm pitch) F35S Series FEATURES 1. Space-saving (0.35 mm pitch) When mated, the footprint is reduced by approx. 12% from F4S series (40 pin contacts).

More information

Narrow pitch connectors (0.5mm pitch)

Narrow pitch connectors (0.5mm pitch) For board-to-board For board-to-fpc Narrow pitch connectors (0.5mm pitch) P5KF 5.8mm Socket 3.3mm Header 2. Strong resistance to adverse environments! Utilizes construction for high contact reliability.

More information

Narrow pitch connectors (0.4mm pitch)

Narrow pitch connectors (0.4mm pitch) AXK7L, 8L For board-to-fpc Narrow pitch connectors (0.4mm pitch) F4 Series 5.0mm 4.1mm 3. Improved mating strength between the socket and header The simple locking structures provided for the soldering

More information

Automation Controls Group Catalog. Connectors High Current Connectors. industrial.panasonic.com/ac/e/ Active Optical Connectors

Automation Controls Group Catalog. Connectors High Current Connectors. industrial.panasonic.com/ac/e/ Active Optical Connectors Automation Controls Group Catalog Connectors industrial.panasonic.com/ac/e/ 2016-2017 High Current Connectors Active Optical Connectors T A B L E O F C O N T E N T S Page Feature of TOUGH CONTACT...2 Guide

More information

For board-to-fpc. Narrow pitch connectors (0.4mm pitch)

For board-to-fpc. Narrow pitch connectors (0.4mm pitch) To Be Discontinued Last time buy: September 30, 2017 For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4F 3.0mm Socket 2.4mm RoHS compliant Header FEATURES 1. 0.6 mm mated height low profile two-piece

More information

Introduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series

Introduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector

More information

ERNIPRESS Trapezoidal-Connectors Series TMC

ERNIPRESS Trapezoidal-Connectors Series TMC ERNIPRESS Trapezoidal-Connectors Series TMC Subminiatur-D Connectors to DIN 41 652/IEC 807-3 with Press-fit zone General Solderless press-in technology for connectors in bus systems permits rationalized

More information

1Certified LR R Inner-housing lock. Outer-housing lock

1Certified LR R Inner-housing lock. Outer-housing lock .mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector

More information

D3SK. The smallest detection switch in the industry with high precision operation. ( mm (W D H)) List of Models. Surface Mount Switch

D3SK. The smallest detection switch in the industry with high precision operation. ( mm (W D H)) List of Models. Surface Mount Switch The smallest detection switch in the industry with high precision operation. (OMRON's data as of pril 2008) (.0.5 0.9 mm (W H)) Ultra small size and ultra low profile contributing to down-sizing of sets

More information

Up to 8 GHz small microwave relays

Up to 8 GHz small microwave relays Up to 8 GHz small microwave relays RJ RELYS (RJ) 1..1 1..1..3 8.2..3 8.2 FETURES Excellent high frequency characteristics (, at GHz) V.S.W.R.: 1.2 Insertion loss:.db Isolation: Min. 3dB (Between open contacts)

More information

XH2. Half-pitch Board-to-Board Connectors

XH2. Half-pitch Board-to-Board Connectors Half-pitch Board-to-Board Connectors XH2 Allows High-density Mounting for Electronic Devices. A Half-Pitch Connector with a 1.27-mm Pitch for Compactness. A pitch of 1.27 mm for high-density mounting of

More information

DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability

DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end

More information

Quick-connect terminals (#110)

Quick-connect terminals (#110) Sealed Subminiature Basic Switch D2SW-P Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealed to IEC IP67. Switch rating of 2 at 250 VC possible with a single-leaf

More information

Impact dispersion key. Header

Impact dispersion key. Header Automation Controls Catalog Partly To Be Discontinued For board-to-board For board-to-fpc Narrow pitch connectors (0.4mm pitch) P4 Series Without soldering terminals 5.1mm 3.96mm With soldering terminals

More information

XSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION

XSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) XSLS SERIES KEL CORPORATION KEL CONNECTORS,INC KEL Taiwan Co., Ltd. KEL Shanghai Co.,Ltd. www.kel.jp

More information

D-Sub SEaled subminiature D connectors, 2.54 mm pitch

D-Sub SEaled subminiature D connectors, 2.54 mm pitch SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with

More information

XC7. DIN Sequence Connectors. An improved DIN-standard Sequence. Connectors. connectors. Ratings and Characteristics. Materials and Finish

XC7. DIN Sequence Connectors. An improved DIN-standard Sequence. Connectors. connectors. Ratings and Characteristics. Materials and Finish DIN Sequence Connectors XC7 An improved DIN-standard Sequence Connector ows power line to daughter board connection first and removal last. Used the same way as regular DIN connectors. Dimensions are those

More information

Product Compliant to DIN41612/IEC603-2 Standard

Product Compliant to DIN41612/IEC603-2 Standard Product ompliant to IN41612/IE603-2 Standard PN Series Pin Header Side Straight through hole type Receptacle Side Straight through hole PN10E- * *P-2.54S PN10E-* *S-2.54S PN10-* *S-2.54S PN10E-* *S-2.54S

More information

2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays

2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays .6 GHz capable, W carrying power (at.6 GHz), 5Ω/75Ω impedance and Form C relays RE RELAYS (ARE)..44..44 mm inch FEATURES Excellent high frequency characteristics (to.6ghz) Surface-mount type also available

More information

7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits

More information

Connector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less

Connector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less mm Pitch Connectors DIC series mm Pitch Connectors Outline The DIC series provides various connectors for switching between circuits on PCB in combination with various male connectors, for various-pattern

More information

Ordering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121

Ordering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121 Snap ction Switch V General Purpose Snap ction Switch Industry standard design with switching currents of 10 to 21 Widely used for applications where long life expectancy and high reliability is required.

More information

KM025B Series. Features. Application. 025 ( 0.64 mm ) / Standard. Rev. 002 (' ) 1. 표준소형커넥터제품 2. 강화된체결음, 커넥터삽입력을만족한감성품질이우수한커넥터

KM025B Series. Features. Application. 025 ( 0.64 mm ) / Standard. Rev. 002 (' ) 1. 표준소형커넥터제품 2. 강화된체결음, 커넥터삽입력을만족한감성품질이우수한커넥터 Features 1. 표준소형커넥터제품 2. 강화된체결음, 커넥터삽입력을만족한감성품질이우수한커넥터 3. 자동차의소형, 경량화요구에대응한제품 4. 세경전선에대응가능한 W/H 작업성구현 5. 신소재를적용하여외부온도및충격에의한제품파손을개선 Application 1. Switch Unit, Heater Control Unit, Cluster, AVN etc 차량용

More information

2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J

2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature

More information

TX1/TX2/TX3 SERIES CONNECTORS

TX1/TX2/TX3 SERIES CONNECTORS TX 1 to 3 Series connectors are two-piece PC connectors with 1.27mm (.050") contact spacing. They are designed for board-to-cable applications. Configurations include IDC sockets (TX1 and TX2) for flat

More information

1mm Pitch Double Rows Low Profile Wire-to-Board Connectors

1mm Pitch Double Rows Low Profile Wire-to-Board Connectors mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective

More information

Connectors DIN 41612/IEC

Connectors DIN 41612/IEC Connectors DIN 41612/IEC 60603-2 and completions General information The DIN 41612/IEC 60603-2 connector family consists of 13 basic sizes and many complementary versions. It was developed for use in 19"

More information

PSI CONNECTOR. 1Certified LR R Specifications. Standards. 4.0mm pitch/disconnectable Crimp style connectors

PSI CONNECTOR. 1Certified LR R Specifications. Standards. 4.0mm pitch/disconnectable Crimp style connectors PSI ONNETOR.0mm pitch/disconnectable rimp style connectors Wire-to-wire type Secure locking structure Mis-mating prevention mechanism by keying ( to circuits/ kinds of keying) Finger-friendly design Large

More information

BOARD-TO-BOARD HEADERS & RECEPTACLES

BOARD-TO-BOARD HEADERS & RECEPTACLES TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.

More information

Panel-to-Wire / Board-to-Wire, Crimp and Solder Connection Lever Mating Type Rectangular Connector with EMI Countermeasure QE6 Series

Panel-to-Wire / Board-to-Wire, Crimp and Solder Connection Lever Mating Type Rectangular Connector with EMI Countermeasure QE6 Series COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Panel-to-Wire / Board-to-Wire, Crimp and Solder Connection Lever Mating Type Rectangular Connector with EMI Countermeasure QE6 Series CONNECTOR MB-0281-3

More information

Terminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB

Terminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept Insert molded base and improved case-to-base seal provides enhanced resistance to

More information

Without Indicator. With Indicator Model XM9B XM9B Contact Plating Specification 4: Gold Flash Plating

Without Indicator. With Indicator Model XM9B XM9B Contact Plating Specification 4: Gold Flash Plating LAN Modular Jack Connectors XM9B Compact LAN Modular Jack Connectors Category 5e transmission performance met for 1, 2-3, 6 pairs. (Verified with connection to Omron XS5W-T421.) Models available with and

More information

GENERAL CATALOG CONNECTORS

GENERAL CATALOG CONNECTORS GENERAL CATALOG CONNECTORS Table of Contents Introduction... 2 Selector chart... 10 A35S Series... 16 F35S Series... 20 P35S Series... 24 A4US Series... 31 A4S Series... 35 A4F Series... 41 F4S Series...

More information

POWER ROCKER SWITCH. Standard actuator type Wide actuator type UL/C-UL, ENEC/VDE UL/C-UL, ENEC/VDE

POWER ROCKER SWITCH. Standard actuator type Wide actuator type UL/C-UL, ENEC/VDE UL/C-UL, ENEC/VDE POWER ROCKER SWITCH SWITCHES AJ8 switch Standard actuator AJ8 switch Wide actuator FEATURES 1. Power rocker switches for safety requirements. All versions comply with ClassII EN61058-1 insulation grade.

More information

Memory Stick Connectors

Memory Stick Connectors Memory Stick Connectors CB1 Series Card Push Insert/Push Eject Card ejection distance of 1 mm Mounting height of mm Mounting area: Smaller design is 78% of former size Outline Receptacle

More information

Construction. Mechanical data Number of Contacts 7. Electrical data Insulation resistance Contact resistance max. Environmental data.

Construction. Mechanical data Number of Contacts 7. Electrical data Insulation resistance Contact resistance max. Environmental data. 1136 ITT - CCM Catalog 11/20/00 12:29 PM Page 59 The is a connector for MultiMediaCards. These cards have been developed as small form factor memory cards with ROM and RAM capabilities. The connector provides

More information

D-SUBMINIATURE PIN-IN-PASTE CONNECTORS

D-SUBMINIATURE PIN-IN-PASTE CONNECTORS INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,

More information

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

6.2mm pitch/disconnectable Crimp style connectors. 1Certified LR R <Inner-housing lock>

6.2mm pitch/disconnectable Crimp style connectors. 1Certified LR R <Inner-housing lock> 6.mm pitch/disconnectable Crimp style connectors a 0 This VL connector is designed for wire-towire and wire-to-board 6.mm pitch connector corresponding to large current. Secondary retainer, which prevents

More information

CABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7

CABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7 CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION

More information

Meet requirements of USB 2.0

Meet requirements of USB 2.0 NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission

More information

Directory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch

Directory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................

More information

40-Position BGA/LGA PCBeam Connector for Texas Instruments Series 310 DMD

40-Position BGA/LGA PCBeam Connector for Texas Instruments Series 310 DMD PCBeam Connector for 40-Position BGA/LGA PCBeam Connector for Texas Instruments Series 310 DMD Neoconix P/N: FBX0040CMFF6AU00 FEATURES High density 0.7424mm area-array pitch Low profile, 1.06mm mated height

More information

Filtered Combo D-Subminiature Connectors

Filtered Combo D-Subminiature Connectors Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,

More information

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Dynamic Series Connectors

Dynamic Series Connectors D-5000 Series Series profile The Dynamic 5000 series was developed for up to 5 amperes in response to the demand for improved reliability and productivity for the main power lines in equipment. They can

More information

Construction. Mechanical data Number of Contacts 6, 8 or 16. Electrical data Insulation resistance Contact resistance max. Switch contact resistance

Construction. Mechanical data Number of Contacts 6, 8 or 16. Electrical data Insulation resistance Contact resistance max. Switch contact resistance 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 45 CCM04 MKII The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided

More information