WELKER VFD PANEL BOXES
|
|
|
- MargaretMargaret Dalton
- 5 years ago
- Views:
Transcription
1 ISO 9001 REGISTERED WELKER VFD PANEL BOXES NOTE: CUSTOMER SUPPLIED VFD MUST HAVE A MINIMUM OF FOUR (4) INPUTS. FOR PROPER FUNCTION, BOTH DECELERATION SWITCHES AND BOTH IN-POSITION SWITCHES MUST BE WIRED DIRECTLY TO THE DRIVE, NOT THROUGH A COMMUNICATION BLOCK. SWITCHES: VERIFY YOUR VFD REQUIREMENT PNP (OPEN) OR PNP (CLOSED) ON THE APPLICATION TEMPLATE Features: Installed program conventions: Fully connectorized = no field wiring required. Switches (6) wired directly to drive for best repeatability and safety. Sealed panel with no fans or filters. Basic program installed in drive. Forward is away from motor. All prox cables must be active to run shuttle. Use extreme caution and slow speed when using laptop controlled jog mode. The switches will be disabled and over-travel crash is possible. ETHERNET SAFETY PLC PANEL BOXES NOTE: WILL ONLY FUNCTION WITH ETHERNET SAFETY PLC Application Welker Part number Customer Part Number, per Spec Single axis 1HP S02102 FCA PPSL# SO2102-WELKER-PF525-SINGLE-1HP S02498 Ford Spec Double axis 1HP S02103 FCA PPSL#SO2103-WELKER-PF525-DBL 1HP S02499 Ford Spec Single axis 3HP S02104 FCA PPSL#SO2104-WELKER-PF525-SINGLE-3HP S02498 Ford Spec Double axis 3HP S02105 FCA PPSL#SO2105-WELKER-PF525-DBL-3HP S02499 Ford Spec Single axis 5HP S02242 ETHERNET STANDARD PLC PANEL BOXES Safety inputs, outputs and other safety hardware are not included. The VFD has built-in Safe-Torque-Off inputs that are ready for connection to external safety relays and other components that can be wired to this panel or added to this panel to achieve a desired Safety Category. Application Part number Single axis 1HP S02165 Double axis 1HP Single axis 3HP Double axis 3HP Single axis 5HP S02166 S02167 S02168 S02243 RELEASED 6/15/18 Welker Engineered Products 1401 Piedmont, Troy MI (800)
2 WELKER VFD PANEL BOX COMPONENTS & CABLES ETHERNET SAFETY PLC PANEL BOXES ETHERNET STANDARD PLC PANEL BOXES X Box Components S02102 S02104 S02242 S02103 S02105 S02165 S02167 S02243 Enclosure, 20x32x10, w/ galvanized subplate X X X X Circuit breaker, 3-pole, 30amp X X X X Rotary handle, yellow/red, 12" rod, CB mechanism X X X X Motor protector, 3-pole X X X X Circuit breakers, 2-pole, 3amp (brake) X X X X Powerflex 525 VFDs, 480VAC (no EMC filter) w/extended temp range piggyback fan X X X X Contactors, 3-pole, 24VDC for VFD motor output X X Contactors, 3-pole, 24VDC for brake X X X X Safety relays, 24VDC 2DPDT (interposing between VFD & input relays) X X Relays, 24VDC, 2NO/2NC (steering contacts for VFD inputs) X X X X Power supply, 24VDC 5amp out, 480VAC-2ph in X X X X Ethernet switch, 5-port, unmanaged X X X X Point I/O ethernet adapter. dual port X X 1 point I/O safety input module - 8pt X X 2 point I/O safety output modules - 8pt X X Point I/O terminal bases X X Terminals X X X X (12) M12 4-pin receptacles for slide prox sensors X X X X M35, 3-phase power male receptacle for incoming 480VAC X X X X M35, 3-phase power female receptacles for outgoing power to motors X X X X 4-pin mini female receptacles, 16AWG, 1/2"-14 NPT for brake on motors X X X X 3-pin mini, female receptacles, 16AWG, 1/2"-14 NPT for dyn. brake option X X X X Supplied Cables* Motor Brake Cable: 4-pin Mini DE Patchcord, 30ft Motor Power Cable: 4-pin M35 DE Patchcord, 8m Motor Brake Receptacle: 4-pin Mini Male Receptacle (in motor CB) Motor Power Receptacle: 4-pin M35 Male Receptacle (in motor CB) Inductive Prox Sensor Cable: 4-pin DC Micro M12 DE patch cord, 5M S02166 S02168 *Prox cables can be extended with 4-pin M-12 in field to suit SHEET 2
3 WELKER VFD PANEL BOX FEATURES WELKER VFD PANEL SINGLE OR DOUBLE DRIVE REPEATABLE POSITIONING USING VFD NO FANS OR FILTERS, BETTER FOR WELD ENVIRONMENT COMES WITH PRE-INSTALLED STARTER PROGRAM WORKS WITH BELT AND SCREW CONFIGURATIONS SAFETY FEATURES AVAILABLE ALLEN BRADLEY 525 DRIVES 100% CONNECTORIZED ETHERNET TO PLC ALL SWITCHES WIRED DIRECT TO DRIVE UP REPEATABILITY INCOMING POWER OUTGOING MOTOR POWER SWITCH INPUTS BRAKE RESISTOR IF REQUIRED MOTOR BRAKE TYPICAL PANEL LAYOUT: TYPICAL PANEL BOX: SHEET 3
4 SOME FEATURES PROVIDED IN COMPLETE PLUG & PLAY SYSTEMS FROM WELKER: MANUAL BRAKE RELEASE CONNECTORIZED MOTOR POWER CONNECTORIZED BRAKE CONTROL CABLE SHEET 4
5 TYPICAL CONTROLS & PALLET SENSORS: EXAMPLE PART NEST TOOLING (SUPPLIED BY CUSTOMER) WIRELESS PART PRESENT SWITCHES WIRELESS POWER AND COMMUNICATION BLOCK (BY CUSTOMER) CUSTOMER PROVIDED WIRELESS POWER AND COMMUNICATION BLOCK TRANSMITTER DECEL IN-POSITION STOP OVER TRAVEL SHEET 5
SmartWire-DT In panel and on machine wiring solutions. Revolutionizing in-panel control wiring and on-machine connection of sensors and actuators
SmartWire-DT In panel and on machine wiring solutions Revolutionizing in-panel control wiring and on-machine connection of sensors and actuators SmartWire-DT Changing the way panels... Reduce cost throughout
Variable Frequency Drive Design Guidelines
Variable Frequency Drive Design Guidelines The Variable Frequency Drive Design Standard provides design criteria and specifications used in the procurement and application of variable frequency drives
SmartWire-DT In-panel and on-machine wiring solutions. Revolutionizing in-panel control wiring and on-machine connection of sensors and actuators
In-panel and on-machine wiring solutions Revolutionizing in-panel control wiring and on-machine connection of sensors and actuators Changing the way panels... Reduce cost throughout the value chain. T
ArmorStart Distributed Motor Controllers
ArmorStart Distributed Motor Controllers ArmorStart ST Expands the ArmorStart Portfolio with Safety Features/Benefits Features built-in dual port for EtherNet/IP allowing a DLR to enhance efficiency and
For normal duty, design the VFD voltage level at 480 Volt, 3 Phase, 60 Hertz. (In Canada, 600 Volt, 3 Phase, 60 Hertz.)
Introduction The Variable Frequency Drive Design Guidelines provides design criteria and specifications used in the procurement and application of variable frequency drives (VFDs). Table of Contents 1.
INTERSAFE Data Interface Ports are mounted on an enclosure to allow programming access to devices inside without opening the enclosure door.
Spec-00131 INTERSAFE Data Interface Ports, Type 4/4X/12 INDUSTRY STANDARDS Mild Steel Painted Ports UL 508A Component Recognized; Type 4, 12; File No. E61997 cul Component Recognized per CSA C22.2 No 94;
AC Micro Style Cordsets and Receptacles
AC Micro Style Cordsets and Receptacles Description Rockwell Automation/Allen-Bradley offers a wide variety of connection products for interfacing field devices to I/O, junction boxes, PLCs, etc. Connection
Instruction Manual HPH-8
Specifications HPH-8 Trigger cable 120-volt, Nema 1-15 Main Power 50-amps @ 240-volt AC Power receptacles (4) Nema 5-15 or 6-15 Maximum HID wattage 8000 watts (on 240-volt) 4800 watts (on 120-volt) Maximum
USER S MANUAL. CNC Stepper Motor Control Box CS3EA4-1 Rev. 1
USER S MANUAL CNC Stepper Motor Control Box CS3EA4-1 Rev. 1 April, 2012 USER'S MANUAL TABLE OF CONTENTS Page # Contents 1.0 FEATURES... 2 2.0 SPECIFICATIONS... 3 3.0 SYSTEM REQUIREMENTS... 3 4.0 WARNING...
INTERSAFE DATA INTERFACE PORTS, TYPE 4/4X/12
SPEC-00131 INTERSAFE Data Interface Ports INTERSAFE Data Interface Ports, Type 4/4X/12 INTERSAFE DATA INTERFACE PORTS, TYPE 4/4X/12 INDUSTRY STANDARDS Mild Steel Painted Ports UL 508A Component Recognized;
Standard Options. Model 4100 Position Indicating Meter. Three Phase Motor Control. Positran Transmitter
Standard Options Model 4100 Position Indicating Meter A percent-of-full-travel meter is supplied with a trim potentiometer resistor, terminal block and connectors. A potentiometer is required in the actuator
- Electronic Limit Switches - Very Accurate - Easy to use - Robust - Dependable - High Resolution - Non Contact Measurement - Wide Temp.
1-30-2018 EPS 02 Operating Instructions RACO Electronic Position Sensor - Electronic Limit Switches - Very Accurate - Easy to use - Robust - Dependable - High Resolution - Non Contact Measurement - Wide
ReFlx 100 PLUS COLLISION AVOIDANCE SYSTEM
100 PLUS COLLISION AVOIDANCE SYSTEM The 100 Plus collision avoidance system is intended for use with bridges and trolleys to prevent collisions or to limit the approach of adjacent bridges or trolleys.
Bulletin 280/281 ArmorStart Distributed Motor Controller Overview
Overview 1 2 3 5 6 7 8 9 10 11 12 13 The Bulletin 280/281 ArmorStart Distributed Motor Controller is an integrated, pre-engineered, starter for full-voltage and reversing applications. The ArmorStart offers
Safety Systems Safety Integrated
3SE2 / SE3 Molded plastic /metal enclosure with separate actuator Application Safety interlock switches with separate actuator are used where the position of doors, covers or safety screens must be monitored
Unidrive M400 (Frame 1 to 4) Quick Start Guide
This guide is intended to provide basic information required in order to set-up a drive to run a motor. For more detailed installation information, please refer to the Unidrive M400 User Guide which is
For additional PowerFlex 4M data and general drive information, refer to the following publications:
Product Overview Providing users with powerful motor speed control in a compact, space saving design, the Allen-Bradley PowerFlex 4M AC drive is the smallest and most cost effective member of the PowerFlex
78 Series Electromechanical Relay Selection Guide
78 Series Electromechanical Relay Selection Guide Specification 781 Series 782 Series 783 Series 784 Series Coil Voltages Configuration SPDT DPDT 3PDT 4PDT Contact Rating 15A 15A 15A 15A Base Socket 5
Product Description. Table of Contents
Product Providing users with easy installation in mechanical fan and pump systems, the Allen-Bradley PowerFlex 400 AC drive offers a wide range of built-in features allowing for seamless building system
Revolutionizing control wiring
SmartWire-DT Panel Wiring Solutions Revolutionizing control wiring 797-6925 Fax: (215) 221-1201 www.royalelectric.com SmartWire-DT Changing the way panels are wired. Reduce cost throughout the value chain.
Series LC6D/LC6C. LJ1 LG1 LC1 LX LC6D/LC6C Switches LC6C LC6D. Series LX Dedicated Stepper Motor Driver and Positioning Driver
Series LCD To power supply Stepper Motor Driver LCD Electric Actuator Series LCC Series LX Dedicated Stepper Motor Driver and Positioning Driver Series LCD/LCC PLC Positioning unit (Not incl. To be provided
Temperature Switches
ETS 00 Series Temperature Switch for Inline and Tank Mounting Applications Description The ETS 00 is a compact electronic temperature switch with 4-digit digital display. Pressure resistant to 8700 psi,
Advantys ETB. DATA SHEET Advantys ETB IP 67 Ethernet Digital I/O Modules. Description. Features
Advantys ETB DATA SHEET Advantys ETB IP 67 Ethernet Digital I/O Modules The Advantys ETB family of IP 67 digital I/O modules with direct connection to the Ethernet ( Modbus TCP/IP ) Communication Network.
ArmorConnect Power and Control Media
Selection Guide ArmorConnect Power and Control Media Bulletins 280, 888, 889, 898 2 Bulletin 280, 888, 889, 898 Power Media Product Overview Media Description Features Trunk Cable Cordset - Cable with
USER S MANUAL. CNC Servo Stepper Motor Control Box CH4EV12-1 Rev. 1
USER S MANUAL CNC Servo Stepper Motor Control Box CH4EV12-1 Rev. 1 January, 2013 i USER'S MANUAL TABLE OF CONTENTS Page # Contents 1.0 FEATURES... 1 2.0 SPECIFICATIONS... 2 3.0 SYSTEM REQUIREMENTS... 2
Installation Instructions
Installation Instructions This document provides information on: important pre-installation considerations power supply requirements installing the module connecting the wiring using the indicators for
Application Technique. Safety Function: Safe Limited Speed and Safe Maximum Speed
Application Technique Safety Function: Safe Limited Speed and Safe Maximum Speed Products: TLSZR-GD2 Guard Locking Switch/Guardmaster Safety Relay/ PowerFlex 70 Drive Safety Rating: PLd, Cat. 3 to EN ISO
Adapter Kit - QSI Electronics to G-Series Meter Installation Instructions
Adapter Kit - QSI Electronics to G-Series Meter Installation Instructions These installation instructions cover the adapter kit installation of the QSI1, QSI2 and QSI3 versions of communications electronics
SC SERIES. Up to 16 I/O devices can be connected at once using MIL connectors. Sensor-PLC Connection System WIRE-SAVING UNITS.
SERIES Sensor-PLC Connection System Up to 6 I/O devices can be connected at once using MIL connectors Conforming to EMC Directive Up to 6 I/O devices can be connected at once using MIL connectors Up to
Integrated Battery Control System LBCS Step-by-Step Setup Guide
Integrated Battery Control System LBCS Step-by-Step Setup Guide 1. Components of the System 2. Components of the System 3. LBCS Overview 4. Battery Connections 5. Sense Board Installation 6. Sense Board
PowerFlex 4-Class Options
Catalogs > AC and DC Drives Catalog > PowerFlex 4-Class Options PowerFlex 4-Class Options Human Interface Modules and Accessories Description Cat. No. Used with PowerFlex Drive Remote (Panel Mount) LCD
Research Concepts RC2500 Antenna Interface Unit (AIU) Board Set
Research Concepts RC2500 Antenna Interface Unit (AIU) Board Set A board set has been developed that can be incorporated into an AIU for an RC2500 antenna controller. This board set is the basis of RC2500
SSW06. Soft Starters.
The is WEG s third generation Soft Starter line. The keypad, with dual display, has red LED digits which provide visibility and make programming easier. Integral bypass contacts eliminate heat dissipation
V: kw / Hp / A Ratings
PowerFlex 4 AC Drive Designed to meet global OEM and end-user demands for simplicity, space savings, and cost efficiency, this drive provides intuitive features such as an integral keypad with local potentiometer
Expansion Unit Catalog Nos , - 152, - 153, - 154, - 156, -E157
PRODUCT DA TA SLC 150 110 Expansion Unit Catalog Nos. 1745-151, - 152, - 153, - 154, - 156, -E157 7 : The EXpdnSiQn Unit The SLC 150 expansion unit can be used with either the SLC 150 processor unit or
Schematic Diagrams In this session, the schematic diagrams and control panel layout are covered. The control panel is 21 wide by 27 tall, and
s In this session, the schematic diagrams and control panel layout are covered. The control panel is 21 wide by 27 tall, and typically it would be housed in a 24 wide by 30 tall enclosure. For our demonstration
Applications Cookbook Metering Solutions Version 3.0 FOR REFERENCE ONLY
Applications Cookbook Metering Solutions Version 3.0 FOR REFERENCE ONLY METERING SOLUTIONS COOKBOOK NOTES Measurement & Verification - Data Collection GENERAL NOTES 1. Refer to installation instructions
Safety Light Curtains GuardShield Remote Teach
Specifications Presence Sensing Safety Devices Description The system provides a remote means of changing a fixed blanking configuration within the GuardShield safety light curtain. This keyswitch box
ReFlx. ReFlx 100 Collision Avoidance System Instruction Manual Page 1 6/30/99
100 COLLISION AVOIDANCE SYSTEM The 100 collision avoidance system is intended for use with bridges and trolleys to prevent collisions or to limit the approach of adjacent bridges or trolleys. The system
Electrical Demand Specification (Reference SOP: )
Project: Equipment Description: Location: Equipment No.: Project No: Protocol No.: Content Index 1. GENERAL...3 Design Standards...3 1.1. Standards...3 2. DESIGN...3 2.1. Safety...3 2.2. Circuit protection...3
Unidrive M200, M201 (Frame 1 to 4) Quick Start Guide
This guide is intended to provide basic information required in order to set-up a drive to run a motor. Please refer to the Unidrive M200 / M20 User Guide which is available to download from www.controltechniques.com/user
Module Wiring Standard. Concord Model Railroad Club May 3, 2017
Module Wiring Standard Concord Model Railroad Club May 3, 2017 CMRC DCC V2.0 Power Bus 30A Andersen Powerpole Connectors 12AWG Wiring Non-mainline tracks are electrically isolated from the mainline and
Pump Data Sheet - Patterson HVAC Pumps Company: Intermountain Hydron Name: Cache County Mountain Crest Date: 09/24/2018
Pump Data Sheet - Patterson HVAC Pumps Company: Intermountain Hydron Name: Cache County Mountain Crest Date: 09/24/2018 Tags: P-8 1800RPM Premium Efficient Motor 460/3/60 Pump and Motor Weight: 183lbs
MAIN PRODUCTS. To provide value product which satisfy customer in Quality, Reliability, Performance and Durability.
ELECTROPLATING To provide value product which satisfy customer in Quality, Reliability, Performance and Durability. To strive continuously to improve quality through Kaizen, employee safety & motivation,
4/8/ nd Annual OTCO WW Workshop W/WW Product Overview ACQ550. ABB Slide 1
4/8/2015 52 nd Annual OTCO WW Workshop W/WW Product Overview ACQ550 Slide 1 Drive Basics Why Use Adjustable Speed Drives? Reduced Energy Consumption Improved Process Control / Efficiency Increased Product
Owner s Manual SGA 100 And SGA 100C NOTE NOTE. 1. Safety Symbol Definitions. 2. Weld Control Specifications. 3. Duty Cycle
Owner s Manual SGA 100 And SGA 100C October 2001 FORM: OM-190 753H Use above FORM number when ordering extra manuals. 1. Safety Symbol Definitions Warning! Watch Out! There are possible hazards as shown
Introduction to Designing Machine Control Systems, Part 2
Introduction to Designing Machine Control Systems, Part 2 by Ed Thompson Introduction: This course is the second part of a two part series, as an introduction for designing Machine Control Systems for
CONTROL SYSTEMS SOLUTIONS FOR PRECISION MOTION TECHNOLOGY. Your First Choice. for Control Systems Solutions
CONTROL SYSTEMS SOLUTIONS FOR PRECISION MOTION TECHNOLOGY Your First Choice for Control Systems Solutions DUFF-NORTON CONTROL SYSTEMS FOR PRECISION MOTION TECHNOLOGY Whether you need a custom turn-key
Galil Motion Control. EDD 3701x
Galil Motion Control EDD 3701x Datasheet : Digital Drive 1-916-626-0101 Galil Motion Control 270 Technology Way, Rocklin, CA [Type here] [Type here] (US ONLY) 1-800-377-6329 [Type here] Product Description
F1000 User's Manual. (Version: V1.01)
(Version: V1.01) Contents Chapter 1 Overview... 2 Chapter 2 Installation... 3 2.1 Installation guide... 3 2.1.1 Installation position... 3 2.1.2 NEMA4 standard installation... 3 2.1.3 Environment precautions...
Motors Automation Energy Transmission & Distribution Coatings CFW300. Variable Frequency Drive US.CFW300(03/2017)
Motors Automation Energy Transmission & Distribution Coatings Variable Frequency Drive US.(03/2017) Variable Frequency Drives The variable frequency drive is a high-performance VFD for three-phase induction
Torque Series LCD Remote Panel Installation/Operation Manual Model: TQ-DSP-12/24
Torque Series LCD Remote Panel Installation/Operation Manual Model: TQ-DSP-12/24 Section Page Introduction 1 Materials Provided 1 I) Safety Instructions 1 A) Inverter Safety Instructions 1 B) Battery Safety
PACSystems* RX3i and Series IC693MDL940 / IC694MDL940
May 2015 PACSystems* RX3i and Series 90-30 IC693MDL940 / IC694MDL940 Output Module, Relay, NO, 2 Amp, 16 Point The Series 90*-30 and PACSystems * MDL940 2 Amp Relay Output module provides 16 normally-open
IEC Power Control Contactors and Contactor Assemblies
IEC Power Control Contactors and Contactor ssemblies Contents Pages Contents Pages Section Overview......................... / - /5 Product Overview......................... /6 - /7 Contactors 3RT0 / 3RT0,
ArmorStart ST Motor Controllers: Safety and Standard Versions
Selection Guide ArmorStart ST Motor Controllers: Safety and Standard Versions Bulletins 281E and 284E (With RRG Gland) ArmorStart ST Motor Controllers: Safety and Standard Versions What s Inside Topic
802B Compact, Precision and Small Precision
02B Compact, Precision and Small Precision Compact Precision Small Precision Description Bulletin 02B consists of different body styles: compact, precision and small precision. Each style has been designed
Drive Technology \ Drive Automation \ System Integration \ Services. Manual. Electronic Motor DRC Functional Safety
Drive Technology \ Drive Automation \ System Integration \ Services Manual Electronic Motor DRC Functional Safety Edition 02/2012 19376812 / EN SEW-EURODRIVE Driving the world Contents Contents 1 General
Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Two-hand control unit for press controllers and safety circuits Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous 1
Industrial Pressure Transmitter
NAT 8 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The industrial transmitter
NHP SAFETY REFERENCE GUIDE
NHP SAFETY REFERENCE GUIDE GSR SAFETY FUNCTION DOCUMENTS Safe Limited Speed and Safe Maximum Speed Table of Contents: General Safety Information 6-83 Introduction 6-85 Safety Function Realization: Risk
Company, Simplex Onsite, providing nationwide load bank rentals.
Trident 2500 1500KW - 2500KW Overview Integrated design, load module, trailer, reels, cam-lock style connections, digital control Very high capacity, 1500-2500kw Dual voltage: 208-240/416-480vAC Digital
Commercial and Residential Turntables. Motion Control User Manual Model MC-2
Commercial and Residential Turntables Motion Control User Manual Model MC-2 Introduction The control system for the Carousel Turntables offers four modes of operation: 1. Manual 2. Camera 3. Preset 4.
Omron Adept Hornet 565 Robot Quick Setup Guide
Omron Adept Hornet 565 Robot Quick Setup Guide P/N: 14692-000, Rev A July, 2015 1.1 Introduction This Quick Setup Guide steps you through the installation and start-up of your Omron Adept Hornet 565 robot.
Motion Controller. MXC Series Multi-Axis Motion Controller Compact Motion Controller with up to 6 Axes of Control
MXC Series Multi-Axis Motion Controller Compact Motion Controller with up to 6 Axes of Control Allied Motion s MXC motion controller is a very compact, multi-axis servo and/or step motor motion controller,
PowerXL DG1 Product Overview Eaton Corporation. All rights reserved.
PowerXL DG1 Product Overview Product line overview Machinery OEM drives DE1, DC1, DA1, M-Max HVAC drives H-Max General purpose industrial drives DG1, SVX High performance drives SPX, LCX, SPI Low harmonic
Bulletin 294 ArmorStart LT Distributed Motor Controllers Feature Diagram
Feature Diagram E Feature Diagram On/Off Switch Wiring Access LockOut/TagOut Provision HOA Keypad (optional) Status and Diagnostic LEDs Reset IP Address Switches ECM (Electronic Control Module) Gland Plate
When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description
Vision OPLC V350-35-R34/V350-J-R34 Installation Guide The Unitronics V350-35-R34/V350-J-R34 offers the following onboard I/Os: 22 Digital Inputs, configurable via wiring to include 2 Analog and 3 HSC/Shaft-encoder
PTC/PT100 board 2.0 Option
PTC/PT100 board 2.0 Option Instruction Manual - English PTC/PT100 board 2.0 Option Instruction Manual - English Document number: 01-3873-01 Edition: r1 Date of release: 2006-10-30 Copyright Emotron AB
Three Phase Systems-International PC302-I/MTD
Three Phase Systems-International PC302-I/MTD Enclosure Power Distribution Units (epdu ) sales@pulizzi.com 800-870-2248 Fax: 605-334-4999 Front RACK MOUNTED 19 x 3.4 (2U) x 8.5 with recess mounting Approximate
AC300/AC400 SERIES DYNAMIC BRAKING and ADDITIONAL FORM C RELAY. INSTALLATION INSTRUCTIONS Document Number:
Minarik Variable Speed AC Motor Drives AC300/AC400 SERIES DYNAMIC BRAKING and ADDITIONAL FORM C RELAY INSTALLATION INSTRUCTIONS Document Number: 250-0297 These instructions apply to models rated: 7.5 25
E510. Compact Drive IP 20/ NEMA HP (230V) 1-75 HP (460V)
E510 Compact Drive IP 20/ NEMA 1 0.5-40 HP (230V) 1-75 HP (460V) Control Mode Application & Selection Guide The E510 compact AC Drive is an easily configurable product that controls many motor driven applications.
29 $ Manual Motor Starters FREESHIPPING. MOTOR CONTROLS 25. Features: MMS-32H Frame. MMS-63H Frame.
www.factorymation.com/motorcontrols MOTOR CONTROLS 25 Manual Motor Starters High interrupt capacity Din rail and surface mounting Lockable handle (OFF position) IP20 finger safe terminals Class 10 thermal
Shuttle Oven Models: S1200, S2000, S2000NC
Shuttle Oven Models: S100, S000, S000NC Need help? Call our hour, toll-free Ovention Hotline Replacement Parts List IMPORTANT NOTE: Locate the Specification Label on the unit to determine the exact Model
Version 1.9. Reference for Part Numbers: EQUBE-P EQUBE-N EQUBE-AI-P
Version 1.9 January 2018 Reference for Part Numbers: EQUBE-P EQUBE-N EQUBE-AI-P Publication EQ-1000 Module firmware and functionality is protected by U.S. and international patents. For complete patent
Q-LINK SMART BYPASS. SIZING INFORMATION TABLE Q-Link Variable Frequency Drive - 3-Phase 208 VAC 230 VAC VAC HP FLA HP FLA HP FLA TECHNOLOGIES
Q-LINK SMRT BYPSS 1 28, 208 480VC, 3Ø UL Type 1 Enclosure The is an integrated solution for critical applications without compromising for communications and motor protection. Unlike traditional bypasses,
Thermometer / Barometer System
TBX USER S MANUAL Thermometer / Barometer System 616TA Pg.2of12 TABLE OF CONTENTS QUICK START GUIDE... 3 INTRODUCTION... 6 SPECIFICATIONS... 6 TERMINAL COMPARTMENT LAYOUT... 7 FEATURES... 8 OPERATION...
Quantum III. Compact DC Drive Package. Slitter DC Drive Package. Quantum III
Compact DC Drive Package The delivers a DC drive package that integrates the intelligence of the Mentor II with a space saving design that incorporates many accessories typically required in the North
Bulletin 290/291 ArmorStart LT Distributed Motor Controllers Specifications
Power Circuit Control Circuit (External Source) Control Circuit (Internal Source) Short Circuit Current Rating (SCCR) Application Electrical Ratings Three-phase Number of Poles 3 Input Power Terminals
Digital DRIVE for Brushless motor MD Serial
Digital DRIVE for Brushless motor MD Serial Installation guide Read manual before installing and respect all indications with this icon: MD-GI/EN Table of Contents 1- Introduction... 3 1-1- Warning...
Multipin Plugs & Receptacles
DN9c DN9c Multipin 20A Plugs & Receptacles Ratings Voltage 50 VAC or 480 VAC Max/ 130 VDC + + For DC order model Amperage Rating 20A Non-Current Interrupting Environmental Ratings IP54/IP55 Temperature
Product Overview. PowerFlex 520-Series AC Drives Feature. Modular Design. Packaging and Mounting. Optimized Performance
Product Overview The PowerFlex 520-Series AC drive delivers an innovative design that is remarkably versatile and can accommodate systems ranging from standalone machines to simple system integration.
Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
CNC4PC. MULTIFUNCTION CNC BOARD Rev2
CNC4PC Manual MULTIFUNCTION CNC BOARD Rev2 Overview This card has been designed to provide a flexible interface and functions to your computer projects, by using the parallel port control software. This
Level-Lance Model 5400A
Sales Manual Section 100 PRODUCT SPECIFICATION 5400A GENERAL DESCRIPTION The ROBERTSHAW Level-Lance Model 5400A is a microprocessor based, multi-point On-Off capacitance type level detection system. Utilizing
Custom Switchracks: Built to Comply with NEC/CEC Standards From Design to Installation, Appleton is The Switchrack Authority
From Design to Installation, Appleton is The Switchrack Authority With over 80 years in the industry, Appleton is one of the first and the most respected names in custom switchracks for hazardous and adverse
VLT 2800 DRIVE SPECIFICATIONS
VLT 2800 DRIVE SPECIFICATIONS Drive Input Power Input voltage 3 phase... 200 through 240, or 380 through 460; 3-phase all ratings 200 through 240, 1-phase through 2 HP Input voltage range for full output...
ATV340D75N4E variable speed drive - 75kW- 400V - 3 phases - ATV340 Ethernet
Characteristics variable speed drive - 75kW- 400V - 3 phases - ATV340 Ethernet Main Range of product Product or component type Device application Device short name Variant Product destination Mounting
in widespread use with Simplex sister Company, Simplex Onsite, providing nationwide load bank rentals.
600KW - 1250KW Overview Integrated design, load module, trailer, reels, cam-lock style connections, digital control High capacity, 600-1250kw Dual voltage: 208-240/416-480vAC Digital load control, 5 kw
Vision OPLC V TR6/V350-J-TR6
Vision OPLC V350-35-TR6/V350-J-TR6 Installation Guide The Unitronics V350-35-TR6/V350-J-TR6 offers the following onboard I/Os: 8 Digital Inputs, configurable via wiring to include 2 Analog (current/voltage)
G9SX-GS. Safety Guard Switching Unit. A Safety Measure for Hazardous Operations That Does Not Lower Productivity. Auto Switching Function
Safety Guard Switching Unit CSM DS_E_6_1 A Safety Measure for Hazardous Operations That Does Not Lower Productivity Two functions support two types of application: Auto switching: For applications where
USER S MANUAL. C35S- QUICK SETUP BREAKOUT BOARD Rev. 1.3
USER S MANUAL C35S- QUICK SETUP BREAKOUT BOARD Rev. 1.3 FEBRUARY, 2015 USER'S MANUAL TABLE OF CONTENTS Page # Contents 1.0 OVERVIEW... 1 2.0 FEATURES... 1 3.0 SPECIFICATIONS.... 2 4.0 BOARD DESCRIPTION...
Connecting a Cisco Input Module
CHAPTER 4 Overview The optional Cisco Input Module (Figure 4-1) is attached to a Cisco Physical Access Gateway or Cisco Reader Module to provide additional connections for up to ten input devices. Each
E-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Block diagram Unit features Positive-guided relay outputs: 6 safety contacts (N/O), instantaneous 4 auxiliary
CFW-09HD LINE DC LINK POWER SUPPLY
CFW-09HD LINE DC LINK POWER SUPPLY CFW-09HD Line Addendum to the CFW-09 Manual Addendum to the CFW-09 Manual CFW-09HD Line I. GENERAL INFORMATION This addendum has information about the CFW-09HD line
T62 - Next Generation of Compact AC Drives
T62 - Next Generation of Compact AC Drives PUBLIC INFORMATION Rev 5058-CO900E 2 Agenda PowerFlex 520-Series Why the PowerFlex 527? PowerFlex 527 AC Drive Target Applications Application Benefits of PowerFlex
EIO /2009. Advantys ETB. IP67 Ethernet Block I/O Modules for Modbus TCP/IP User Guide 7/2009 EIO
EIO0000000158 7/2009 Advantys ETB IP67 Ethernet Block I/O Modules for Modbus TCP/IP User Guide 7/2009 EIO0000000158.00 www.schneider-electric.com Schneider Electric assumes no responsibility for any errors
Butterfly Laser Diode Mount
LM14S2 Butterfly Laser Diode Mount Operating Manual LM14S2 Laser On TEC Driver LD Driver THORLABS, Inc. Ph: (973) 579-7227 435 Route 206N Fax: (973) 383-8406 Newton, NJ 07860 USA www.thorlabs.com 10614-D02
ARMORSTART DISTRIBUTED MOTOR CONTROLLER SAFETY VERSION
QUICK START ARMORSTART DISTRIBUTED MOTOR CONTROLLER SAFETY VERSION Getting Started BULLETIN 280G/281G Introduction This guide provides the basic information required to start up your ArmorStart Distributed
Contactors and Contactor Assemblies
Contactor Industrial Controls Product Catalog 07 Section c o n t e n t s Section Overview / - /5 Product Overview /6 - /7 Contactors 3RT0, 3-pole to 95 /8 3RT0, 3-pole to 500 /9 3RT, 3-pole Vacuum to 500
SSW06. Soft Starters. Applications. Standard Features. Pumps Fans Blowers Compressors Crushers Saws Grinders Mixers.
General Information CFW10 CFW100 CFW08 CFW500 CFW700 CFW701 CFW11 EDP11 CFW11M SSW05 SSW07 GPH2 TPH2 The is WEG s third generation Soft Starter line. The keypad, with dual display, has red LED digits which