Electronic timer CT-SDS.23 Star-delta change-over with 2 n/o contacts

Transcription

1 Data sheet Electronic timer CT-SDS. Star-delta change-over with n/o contacts The CT-SDS. is an electronic timer from the CT-S range with Star-delta change-over and 7 time ranges. All electronic timers from the CT-S range are available with two different terminal versions. You can choose between the proven screw connection technology (double-chamber cage connection terminals) and the completely tool-free Easy Connect Technology (push-in terminals). CDC 00 V00 Characteristics Rated control supply voltage 80 0 V AC Star delta change over 7 time ranges (0.0 s 0 min) Precise adjustment by front-face operating controls Screw connection technology or Easy Connect Technology available Housing material for highest fire protection classification UL 9 V-0 Tool-free mounting on DIN rail as well as demounting n/o contacts. mm (0.89 in) width LEDs for the indication of operational states Various certifications and approvals (see overview, document no. CDCD00) Order data Electronic timers Type Rated control supply voltage Connection technology Time ranges Order code CT-SDS.P 80 0 V AC Push-in terminals 0.0 s 0 min SVR 70 R00 CT-SDS.S 80 0 V AC Screw type terminals 0.0 s 0 min SVR 70 R00 Accessories Type Description Order code ADP.0 Adapter for screw mounting SVR 0 09 R000 MAR.0 Marker label for devices without DIP switches SVR 07 R000 COV. Sealable transparent cover SVR R000

2 Connection technology Maintenance free Easy Connect Technology with push-in terminals Type designation CT-xxS.yyP Approved screw connection technology with double-chamber cage connection terminals Type designation CT-xxS.yyS CDC 0 F00 CDC 0 F00 Push-in terminals Tool-free connection of rigid and flexible wires with wire end ferrule Easy connection of flexible wires without wire end ferrule by opening the terminals No retightening necessary One operation lever for opening both connection terminals For triggering the lever and disconnecting of wires you can use the same tool (Screwdriver according to DIN ISO 80- Form A 0.8 x mm (0.0 x 0.7 in), DIN ISO 87- PZ ø. mm (0.77 in)) Constant spring force on terminal point independent of the applied wire type, wire size or ambient conditions (e. g. vibrations or temperature changes) Opening for testing the electrical contacting Gas-tight Double-chamber cage connection terminals Terminal spaces for different wire sizes One screw for opening and closing of both cages Pozidrive screws for pan- or crosshead screwdrivers according to DIN ISO 80- Form A 0.8 x mm (0.0 x 0.7 in), DIN ISO 87- PZ ø. mm (0.77 in) Both the Easy Connect Technology with push-in terminals and screw connection technology with double-chamber cage connection terminals have the same connection geometry as well as terminal position. - Electronic timer CT-SDS. Data sheet

3 Functions Operating controls Rotary switch for the preselection of the time range Fine adjustment of the time delay CDC 00 V00 Indication of operational states U/T: green LED control supply voltage / timing R: yellow LED - status of output relay R: yellow LED - status of output relay Marker label Application The CT S range timers are designed for use in industrial applications. They operate over an universal range of supply voltages and a large time delay range, within compact dimensions. The easy to set front face potentiometers, with direct reading scales, provide accurate time delay adjustment. Operating mode The CT SDS. has n/o contacts and includes separated timing circuits: an adjustable motor starting delay, the time the star contactor is energized, and an 0 ms fixed open transition delay before the delta contactor is energized. A rotary switch, on the front of the unit, allows selection of one of 7 time ranges from 0.0 s to 0 min. The fine adjustment of the time delay is made via an internal potentiometer, with a direct reading scale, on the front of the unit. Timing is displayed by a flashing green LED labelled U/T. Examples of application L F L L L F S F I S K KT K K -K -K -K K K -F N KT A K K K A A A Y N CDC 8 F0b0 W V U -M M ~ W V U CDC 009 F00 Star delta change over, control circuit diagram Star delta change over, power circuit diagram Data sheet Electronic timer CT-SDS. -

4 Function diagram FC Star delta change over with impulse This function requires continuous control supply voltage for timing. Applying control supply voltage to terminals A, energizes the star contactor connected to terminals 7 8 and begins the set starting time t. The green LED flashes during timing. When the starting time is complete, the first output contact de energizes the star contactor. Now, the fixed transition time t of 0 ms starts. When the transition time is complete, the second output contact energizes the delta contactor connected to terminals 7 8. The delta contactor remains energized as long as control supply voltage is applied to the unit. -A green LED t t t = adjusted starting time t = transition time (0 ms) CDC 00 F00 Electrical connection st n/o contact 7 8 nd n/o contact 7 A Rated control supply voltage U S 80-0 V AC A A CDC 0 F0b0 Connection diagram - Electronic timer CT-SDS. Data sheet

5 Technical data Data at T a = C and rated values, unless otherwise indicated Input circuits Versorgungskreis -A Rated control supply voltage U S 80 0 V AC Rated control supply voltage U S tolerance...+0 % Rated frequency DC n/a AC 0/0 Hz Frequency range AC 7 Hz Typical current / power consumption 00 V DC ma /. VA Power failure buffering time 00 V DC min. 0 ms Release voltage > 0 % of the min. rated control supply voltage U s Timing circuit Kind of timer Single function timer Star delta change over Time ranges 0.0 s 0 min 0.0 s, 0. s, 0. 0 s,. 0 s, 00 s, 00 s, 0. 0 min Recovery time < 0 ms Repeat accuracy (constant parameters) Δt <± 0. % Accuracy within the rated control supply voltage tolerance Δt < 0.00 %/V Accuracy within the temperature range Δt < 0.0 %/ C Setting accuracy of time delay ± % of full-scale value Star delta transition time fixed, 0 ms Star delta transition time tolerance ± ms User interface Indication of operational states Control supply voltage / timing U/T: green LED V: control supply voltage applied U/T: green LED W: timing Relay status R: yellow LED V: output relay energized R: yellow LED V: output relay energized Output circuits Kind of output 7 8 relay, st n/o contact 7 8 relay, nd n/o contact Contact material Cd free Rated operational voltage U e 0 V Minimum switching voltage / Minimum switching current V / 0 ma Maximum switching voltage / Maximum switching current see Load limit curves on page 8 Rated operational current I e AC- (resistive) at 0 V A AC- (inductive) at 0 V A DC- (resistive) at V A DC- (inductive) at V A AC rating (UL 08) utilization category (Control B 00 Circuit Rating Code) max. rated operational voltage 00 V AC max. continuous thermal A current at B 00 max. making / breaking 00/0 VA apparent power at B 00 Mechanical lifetime 0 x 0 switching cycles Electrical lifetime AC-, 0 V, A 0. x 0 switching cycles Frequency of operation, with/without load 0/7000 h - Maximum fuse rating to achieve short-circuit n/c contact A fast acting protection n/o contact 0 A fast acting Data sheet Electronic timer CT-SDS. -

6 General data MTBF on request Duty time 00 % Dimensions Weight see Dimensional drawing Screw connection technology Easy Connect Technology (push-in) net 0.8 kg (0.0 lb) 0. kg (0.7 lb) Mounting DIN rail (IEC/EN 07), Mounting position Minimum distance to other units vertical not necessary horizontal snap on mounting without any tool any not necessary Material of housing UL 9 V-0 Degree of protection housing IP0 terminals IP0 Electrical connection Connecting capacity Stripping length Tightening torque Recommended screw driver fine strand with(out) wire end ferrule rigid Screw connection technology x 0.-. mm² ( x 8- AWG) x 0.-. mm² ( x 8- AWG) x 0.- mm² ( x 0- AWG) x 0.-. mm² ( x 0- AWG) 8 mm (0. in) Nm (7.08 lb.in) Easy Connect Technology (push-in) x 0.-. mm² ( x 8- AWG) x 0.-. mm² ( x 0- AWG) DIN ISO 80-: Form A / 0.8x.0 mm DIN ISO 87-: PZ / Ø. mm - Environmental data Ambient temperature ranges operation...+0 C storage C Relative humidity range % to 8 % Vibration, sinusoidal (IEC/EN 008 ) functioning 0 m/s, 0-8/0-0 Hz resistance 0 m/s, 0-8/0-0 Hz, 0 cycles Vibration, seismic (IEC/EN 008 ) functioning 0 m/s² Shock, half sine (IEC/EN 008 7) functioning 0 m/s, ms, shocks/direction resistance 00 m/s, ms, shocks/direction Isolation data Rated insulation voltage U i input circuit / output circuit 00 V output circuit / output circuit 00 V Rated impulse withstand voltage U imp input circuit / output circuit kv;./0 µs output circuit / output circuit kv;./0 µs Power frequency withstand voltage between all isolated circuits (test voltage).0 kv; 0 Hz, min Basic insulation (IEC/EN 0) input circuit / output circuit 00 V Protective separation (IEC/EN 0; EN 078) input circuit / output circuit 0 V Pollution degree Overvoltage category III Standards / Directives - Electronic timer CT-SDS. Data sheet

7 Standards IEC/EN 8 Low Voltage Directive EMC Directive RoHS Directive 0//EU 0/0/EU 0//EU Electromagnetic compatibility Interference immunity to IEC/EN 000 electrostatic discharge IEC/EN 000 Level, kv / 8 kv radiated, radio-frequency, electromagnetic field IEC/EN 000 Level, 0 V/m ( GHz) / V/m ( GHz) / V/m (.7 GHz) electrical fast transient / burst IEC/EN 000 Level, kv / khz surge IEC/EN 000 Level, kv A conducted disturbances, induced by radio-frequency fields IEC/EN 000 Level, 0 V harmonics and interharmonics IEC/EN 000 Class Interference emission IEC/EN 000 high-frequency radiated IEC/CISPR, EN 0 Class B high-frequency conducted IEC/CISPR, EN 0 Class B Technical diagrams Load limit curves AC voltage [V] resistive load DC voltage [V] resistive load CDC 0 F00 AC current [A] CDC 9 F00 DC current [A] CDC 0 F00 AC load (resistive) DC load (resistive) Derating factor F Switching cycles 0 V resistive load CDC 8 F cos ϕ CDC F00 Switching current [A] CDC 8 F00 Derating factor F for inductive AC load Contact lifetime Data sheet Electronic timer CT-SDS. - 7

8 Dimensions in mm and inches CDC 009 F00 Accessories in mm and inches CDC 008 F front to back 0.. ADP.0 Adapter for screw mounting MAR.0 Marker label COV. Sealable transparent cover 8. CDC 8 F000 CDC 00 F00 Further documentation Document title Document type Document number Electronic relays and controls Catalog CDC 0 00 C0xx CT-APS, CT-ERS, CT-MVS, CT-SDS Instruction manual SVC M0000 You can find the documentation on the internet at -> Automation, control and protection -> Electronic relays and controls -> Electronic timers. CAD system files You can find the CAD files for CAD systems at -> Low Voltage Products & Systems -> Control Products -> Electronic Relays and Controls. 8 - Electronic timer CT-SDS. Data sheet

9 Contact us ABB STOTZ-KONTAKT GmbH P. O. Box Heidelberg, Germany Phone: +9 (0) Fax: +9 (0) info.desto@de.abb.com You can find the address of your local sales organization on the ABB home page -> Low Voltage Products and Systems Document number CDC 8 D00 (0/07) Note: We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB AG does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents in whole or in parts is forbidden without prior written consent of ABB AG. Copyright 07 ABB All rights reserved