7SR45 Argus 7SR45 Self Powered/Dual Powered Non-Directional Overcurrent and Earth Fault Relay
|
|
- Percival Hardy
- 5 years ago
- Views:
Transcription
1 7SR5 Argus 7SR5 Self Powered/Dual Powered Non-Directional Overcurrent and Earth Fault Relay Energy Management
2 7SR5 Argus 7SR5 Argus Self Powered/Dual Powered Non-Directional Overcurrent and Earth Fault Relay Features Password Protection Self Monitoring Trip Timers Healthy shut-down below operating ranges Remote reset (binary input based) of flag with/without CT power and Auxiliary power Two Settings Groups User Interface Description The 7SR5 Argus Self Powered/Dual Powered Non- Directional Overcurrent and Earth Fault Relay is developed using the latest generation of hardware technology and is available in multiple variants depending on the Current Transformer (CT), binary input/binary output, power supply, and communication configuration. 7SR5 is a member of Siemens Reyrolle protection devices Argus product family. The 7SR5 Argus Self Powered/Dual Powered Non- Directional Overcurrent and Earth Fault Relay is housed either in a U high, size or height reduced non draw-out case and provides protection, monitoring, instrumentation, and metering with integrated input and output logic and fault reports. The relay functionality can be configured via a front USB port for local PC connection or rear electrical RS85 (optional) port for remote connection. By using the Reydisp Evolution software, the user can update the settings and view the fault records (trip log) and the event records (event log). 7SR5 Argus Self Powered/Dual Powered Non-Directional Overcurrent and Earth Fault Relay supports the IEC and Modbus communication protocols. 7SR5 Argus Self Powered/Dual Powered Non-Directional Overcurrent and Earth Fault Relay can indicate the trip with local and remote flag indicator. Function Overview Protection 50 Instantaneous Overcurrent Protection 50N/G Instantaneous Derived/Measured Earth Fault Protection 5 Time Delayed Overcurrent Protection 5N/G Time Delayed Derived/Measured Earth Fault Protection 50LC/SOTF Switch-On-To-Fault 6 Character x Line Backlit LCD Menu Navigation Keys 9 non-programmable LEDs Local Flag Indicator Monitoring Functions Primary/Secondary Current Phases and Earth Binary Input/Binary Output Status Time and Date Fault Records (Trip Log) Event Records (Event Log) Hardware CT ( A or 5 A, via ordering option) BI, BO BI, BO Local Flag Indication via ordering option Remote Flag Output Pulse Output 9 LEDs Rear RS85 Communication Port Auxiliary Power Input Data Storage and Communication Front USB port + Rear RS85 port (optional) Protocols IEC , Modbus RTU Fault Records (Trip Log) Event Recording (Event Log) Time Synchronism Viewing and Changing Settings Battery Profiling Siemens Protection Devices Limited
3 Application 7SR5 Argus Self Powered/Dual Powered Relay is a numerical overcurrent and earth fault protection relay primarily intended for secondary distribution electrical networks. The 7SR5 Argus Self Powered/Dual Powered Non- Directional Overcurrent and Earth Fault Relay is designed to operate with/without an auxiliary supply. The 7SR5 Dual Powered Non-Directional Overcurrent and Earth Fault relay is powered primarily from the auxiliary voltage even though all other power sources are available. In the absence of auxiliary voltage, the relay is powered by CT input. The relay offers definite-time and inverse-time overcurrent and earth fault protection functions in accordance to IEC and ANSI standards. 7SR5 Argus Self Powered/Dual Powered Non-Directional Overcurrent and Earth Fault Relay are built in with a capacitor discharge pulse output for low-energy trip coil of the circuit breaker. Changeover binary outputs are also available for trip via an auxiliary powered shunt trip coil. 7SR5 Argus Self Powered/Dual Powered Non-Directional Overcurrent and Earth Fault Relay are targeted for the following applications: Protection Relay for Ring Main Units (RMU) Back up protection relay for the medium voltage applications Protection applications in remote locations where auxiliary supply is not available Control and relay panels refurbishment of old electromechanical protection relays 50/5 Phase Overcurrent Fault 50 INST/DTL and 5 IDMTL/DTL elements provide overcurrent protection, each with independent settings for pickup current, time-multiplier (5), and time-delays. User can select IEC or ANSI time current characteristics. The IDMT curve has a user selectable reset characteristic, either DTL or IEC or ANSI decaying to improve the grading with electromechanical protection. 50G/5G/50N/5N Measured/Derived Earth fault Two earth fault measurement modes are available. One mode directly measures the earth current from an independent CT (50G/5G) and the second mode derives the residual current internally from the line CTs (50N/5N). 50G/50N INST/DTL and 5G/5N IDMTL/DTL elements provide earth fault protection, each with independent settings for pickup current, time-multiplier (5G/5N), and time-delays. User can select IEC or ANSI time current characteristics. The IDMT curve has a user programmable reset characteristic either DTL or IEC or ANSI decaying to improve grading with electromechanical protection Time (sec) Functional Diagram 0 Long Time Inverse 7SR5 Normal Inverse IL (I A) 50LC/ SOTF 50 (x) 5 Very Inverse IL (I B) 50LC/ SOTF 50 (x) 5 Extremely Inverse IL (I C) 50LC/ SOTF 50 (x) 50N (x) 5 5N Current (multiples of setting) Fig. IEC Overcurrent Curves IL (I G) 50G (x) 5G Fig. Functional Diagram of 7SR5 Argus Self Powered/Dual Powered Non-Directional Overcurrent and Earth Fault Relay Siemens Protection Devices Limited
4 Time (sec) 0 Fig 5. Operating Time for Switch-On-To fault with Pulse Output Moderately Inverse Very Inverse Extremely Inverse Multi-phase faults will result in shorter operating time. Sensitivity In the absence of auxiliary voltage, the sensitivity of the relay is the minimum phase current required for the relay to energize, detect a fault and trip as per the configuration Current (multiples of setting) Fig. ANSI Overcurrent Curves 50LC/SOTF SOTF functionality provides high speed tripping if a fault is still present on the feeder after the reclosure of the circuit breaker (Close-on-to-Fault) or if earthing clamps are left connected after maintenance. The sensitivity of 7SR5 Argus Self Powered/Dual Powered Non-Directional Overcurrent and Earth Fault Relay is 0 % of nominal current for single phase and 0 % of nominal current in three phases. The PROTECTION HEALTHY LED and TRIP READY LED TURN ON when the relay is TRIP ready at the above mentioned current levels. The following graphs show the sensitivity of the relay and corresponding operating time for different start up currents. The following graph shows the SOTF operating time depending on the fault currents. Fig 6. Sensitivity for Single Phase Fault with Binary Output Fig. Operating Time for Switch-On-To fault with Binary Outputs Siemens Protection Devices Limited
5 To Control System Term A/+ GND B/- Ext Wire loop to Include line terminating Res Rear terminals RS85 Screened RS85 Screened twisted pair twisted pair Fig 8. Typical RS85 Connection Rear terminals The rear RS85 can be user selected to be OFF, IEC or Modbus RTU. Fig 7. Sensitivity for Single Phase Fault with Pulse Output Multi-phase current will improve the sensitivity. Data Acquisition - Via Communication Interface Sequence of Event Records (Event Log) Up to 00 events can be stored and time tagged to ms resolution. The events are stored on first-in-first-out basis. The events are available through the communication interface. Fault Records (Trip Log) The last 0 fault records are displayed on the relay fascia and are also available through the communication interface with time and date of trip, measured quantities, and type of fault. Real Time Clock The time and date can be set and is maintained while the relay is de-energised by a coin cell battery. Communications The relay offers a USB port as a standard on the front of all units. All of the relay functions can be set on a PC using Reydisp Evolution software via the USB port. The connection is made with a USB cable and operates with a plug and play connection, so no pre-setting of the relay is required. The front port can be switched off or set to use either the Modbus RTU or IEC protocols for testing purposes. A rear RS85 electrical connection is optionally available on the relay for system interface connections. An internal terminating resistor is provided, which can be connected into the circuit by adding a wire loop between the relevant terminals. Siemens Protection Devices Limited 5
6 Construction User Interface The relay is housed in a non draw-out U high, size case. The rear connection comprises of user friendly pluggable type terminals for pulse and flag output, binary inputs, binary outputs, RS85 communication and auxiliary input. The CT terminals are suitable for ring type lug connection to provide a secure and reliable termination. Fig 9. 7SR50 Front view Fig. 7SR50 Front view Fig 0. 7SR50Rear view Fig. 7SR50 Rear view Fig 5. User Interface The operator interface is designed to provide a user friendly method of viewing menus, entering settings, and retrieving data from the relay. Five buttons are provided for navigation around the menu structure. Additionally, two buttons are provided for battery ON/OFF and Backlight ON/OFF functionality. LCD A line by 6 character liquid crystal display with power save operation indicates the relay identifier, settings, instrumentation, and fault data. LEDs 9 non-programmable LEDs are available eliminating the need for expensive panel mounted pilot lights and associated wiring. Each LED shows clear indication of the associated functions state and has a label for identification. Flag Indicator local flag indicator is provided and configured for the trip indication. Relay Information The device is identified by the rating label on the fascia. The user can also give the device its own identity by editing the Relay Identifier displayed on the LCD. Power 7SR5 Argus Self Powered/Dual Powered Non-Directional Overcurrent and Earth Fault Relay can be powered in the following modes and their priority is as follows: Auxiliary Power Supply CT Power USB Power Battery Power Fig. 7SR50 Front view Fig. 7SR50 Rear view Siemens Protection Devices Limited 6
7 Indication of Conformity This product complies with the directive of the Council of the European Communities on the harmonization of the laws of the Member States relating to electromagnetic compatibility (EMC Directive 0/0/EU) and concerning electrical equipment for use within specified voltage limits (Low Voltage Directive 0/5/EU) as well as restriction on usage of hazardous substances in electrical and electronic equipment (RoHS Directive 0/65/EU). This conformity has been proved by tests conducted by Siemens AG in accordance of the Council Directive in accordance with the product standard IEC/EN for the EMC directives, and with the standard IEC/EN for the low-voltage directive. RoHS directive 0/65/EU is met using the standard EN The device has been designed and produced for industrial use. Technical Data For full technical data, refer to the Technical Specification Section of the User Manual. Technical Data Overview Product Family Case and LEDs Measuring Inputs (Current) Auxiliary voltage Communication Protection Functions Binary Input and Binary Output Remote flag Non Directional Self Powered/ Dual Powered Overcurrent and Earth Fault Relay Non draw-out Polycarbonate case (Size standard, Non draw-out design), 9 non-programmable LEDs A or 5 A (ordering option), 50 Hz/60 Hz V to 60 V DC, 60 V to 0 V AC/DC Front communication port: USB (IEC or Modbus RTU) Rear communication port: RS85 (IEC or Modbus RTU) 50, 50G/N, 5, 5G/N, 50LC/SOTF BI and BO * V, 0.0 Ws Local flag Mechanical Flag Indicator * Normal Green colour Trip Red colour Pulse output V, 0. Ws pulse output Overvoltage Category III Pollution Degree Altitude above sea Maximum up to 000 m level Sensitivity Minimum phase current for relay operation Mechanical Specifications Design Enclosure Weight 0 % of nominal current in single phase 0 % of nominal current in three phases Panel mounting, Non draw-out Polycarbonate moulded case IP 5 (front panel) IP 0 (enclosure sides) IP 0 (rear side) Depth is 0 mm.97 kg (appx) 7SR50/7SR50/7SR50/7SR50 Argus Self/Dual Powered Relay Recommended Terminal Lugs Specifications Current Inputs Auxiliary Supply Rear Communication Port Front Communication Port Binary Input/Binary Output/Pulse Output/Flag Output Ground Terminal TE connectivity PIDG series insulated tin plated crimp ring terminal, M.5 stud size,.6 mm² to 6.6 mm², AWG Insulated tin plated crimp pin connector,.6 mm² to 6.6 mm², AWG to 0 AWG Pin type lug/.5 mm control cable USB, Type B Insulated tin plated crimp pin connector,.6 mm² to 6.6 mm², AWG to 0 AWG Tin plated crimp ring terminal, M stud size, mm² to 6 mm², AWG to 0 AWG, Yellow * Depending on the ordering option Siemens Protection Devices Limited 7
8 Inputs and Outputs Binary Outputs Auxiliary Supply Rated Voltage Frequency Allowable Alternating component in DC (Ripple) Typical Power consumption (DC) Typical Power consumption (AC) Max Interruption time (Collapse to Zero) Current Inputs Quantity Rated Current (In) Measuring Range Instrumentation Frequency Rated CT Burden [measured at Nominal Currents ( A and 5 A)] Binary Inputs 60 V to 0 V AC/DC, Tolerance 0 % to +0 % V to 60 V DC, Tolerance 0 % to +0 % (ordering option) 50 Hz (Range: 5 Hz to 55 Hz) 60 Hz (Range: 5 Hz to 66 Hz) 5 % of DC voltage < 7 W < VA 0 ms (9. V DC) 0 ms (8 V DC) 500 ms (0 V AC) x Phase and x Earth A or 5 A (ordering option) 0.xIn to 0xIn ± 5 % (Typical) ( 0.0xIn to xin) ± % (> xin to 0xIn) 50 Hz (Range: 5 Hz to 55 Hz) 60 Hz (Range: 5 Hz to 66 Hz).5 VA per phase and 0. VA earth for A CT input.0 VA per phase and 0. VA earth for 5 A CT input Number Operating Voltage ( NO contact and C/O contact) or ( NO contact and C/O contact) Potential free Operating Mode User selectable - BO and BO Self or Hand/Electrical Reset BO and BO Self Reset (Operated only with Auxiliary input is present) Operating Time from energizing Binary Input Making Capacity: Carry continuously Make and carry (L/R 0 ms and V 00 V AC) Breaking Capacity ( 5 A and 50 V): AC Resistive AC Inductive DC Resistive DC Inductive Electrical Endurance Disengaging time < 0 ms 5 A AC or DC 0 A AC or DC for 0.5 s 0 A AC or DC for 0. s 50 VA 50 VA at p.f W 0 W at L/R 0 ms 50 W at L/R 0 ms 0000 operations, 50 A, 5 A AC < 0 ms Front Communication Port Quantity Electrical USB, Type B connection Protocol Support Modbus RTU, IEC Number or Rear Communication Port BI Threshold / Operating Range Maximum AC/DC current for operation Pick Up Delay Drop Off Delay 9. V DC Range V to 66 V DC 88 V AC/DC Range 88 V to 65 V DC 68 V to 65 V AC.5 ma User selectable 0 to 600 s (up to 0 min) User selectable 0 to 600 s (up to 0 min) Quantity (Optional) Electrical RS85, wire electrical, twisted pair connection Protocol Support Modbus RTU, IEC Rate Data Transfer rate: 00 bps to bps Data Storage Fault Record (Trip Log) Events (Event Log) 0 records 00 events ( ms resolution) Siemens Protection Devices Limited 8
9 Mechanical Tests Test Degree of Protection Standard IEC 6059, IP5 front IP0 rear Vibration IEC , Response and Endurance, Class I Shock and Bump IEC , Shock response and withstand, Class I Bump, Class I Seismic IEC , Class I Contact Performance Electrical Tests Test Insulation Resistance Impulse Voltage Withstand AC Dielectric voltage Slow Damped Oscillatory Wave $ Electrostatic Discharge Electrical Fast Transient or Burst $ IEC 6055-, (Ref: Std IEC 680-) Standard IEC # Insulation resistance >00 MOhm at 500 V DC Test Duration: > 5 s (Between any terminal and earth, independent circuits) ^ IEC # 5 kv,./50 µs, 0.5 J 5, pulses (Between all terminals and case earth and any two independent circuits) ^ IEC #.0 kv AC RMS for min (Between any terminal and earth, independent circuits) ^.0 kv AC RMS for min (across normally open contacts) IEC Common-mode: Test voltage:.5 kv peak voltage Differential mode: Test voltage:.0 kv peak voltage Test duration: s Source impedance: 00 Ω Voltage oscillation frequency: MHz Repetition frequency: 00 Hz IEC kv air discharge 6 kv contact discharge Zone B Test severity Amplitude: ± kv Repetition frequency: 5 khz IEC Surge Immunity * $ Test Level : Zone A Line to Line : 0.5,, kv Line to Earth : 0.5,,, kv Front time/time to half-value :./50 µs Source Impedance : Ohm Radiated Immunity IEC MHz to.0 GHz and. GHz to.7 GHz Field strength: 0 V/m (RMS) Amplitude Modulated: 80 % AM Conducted Radio Frequency Interference $ Power Frequency Magnetic Field IEC khz to 80 MHz, 0 V (RMS), Dwell time: 0.5 s IEC A/m applied min, 00 A/m applied for s Radiated Emissions IEC Conducted IEC Emissions Thermal Withstand IEC # Functional Performance Maximum Allowable Temperature Gradual shutdown/start-up test Continuous withstand: xin Short time withstand: Test duration s 50 A ( A Current input) 50 A (5 A Current input) IEC and IEC IEC Max. temperature limit +00 C IEC Shut down/start up ramp 60 s Power off 5 min * Additional 50 ms DTL pick-up delay applied to binary inputs. # All aspect of IEC have been covered under IEC ^ Flag output and Pulse output are excluded between any terminals and earth. $ Not applicable for Flag output and Pulse output. Siemens Protection Devices Limited 9
10 Climatic Environmental Tests Product Safety Test Temperature IEC /IEC /IEC Ambient Operating Temperature Permissible Temporary Operating Temperature, (Tested for 6 h) * Storage Temperature (Non-operational) -0 C to + 60 C -0 C to + 70 C -5 C to + 70 C * Applicable for the following: Self powered relay with the rated current. Dual powered relay with the rated auxiliary voltage of 0 V DC and above # For battery - To retain the battery life during the transportation and storage, it is recommended to maintain the permissible temperature range from -0 C to +5 C Humidity IEC /IEC /IEC Damp heat test, Cyclic C, RH > 9 % RH (6 cycles) At lower temperature, 97 %, - % + % RH At upper temperature, 9 %, ± % RH Damp heat test, Steady State 0 days at 9 ± % RH, + 0 C Clearances and Creepage Distances IEC/EN : Edition mm IP Rating IEC/EN : Edition IP5 (Front side) IP0 (Rear side) Impulse Voltage IEC/EN : Edition 5 kv, 5, pulses AC Dielectric Voltage Insulation Resistance Protective Bonding Resistance Protective Bonding Continuity IEC/EN : Edition.0 kv AC, 50 Hz, min IEC/EN : Edition 500 V DC, > 5 s, >00 Mohm IEC/EN : Edition < V AC/DC, min, < 0. Ohm IEC/EN : Edition Flammability IEC/EN : Edition Single Fault Condition Performance 50 Instantaneous & DTL OC&EF IEC/EN : Edition Operation Non-directional Elements Phase, Derived Earth, Measured Earth Setting Range Is 0., 0., xIn (50/50N/50G) Time Delay 0,0.0, s Operate Level Iop 00 % Is, ± 5 % Reset level > 0.xIn to 0.9xIn setting: 90 % Iop > xin to 0xIn setting: 9 % Iop Basic Operate time (with auxiliary power / load current): xis 5 ms, ± 5 ms, 5xIs 0 ms, ± 5 ms 50, 50G, 50N Operate time delay Tbasic+Td, ± % or ± 0 ms Inhibited by Binary Input Disengaging time < 50 ms * * With auxiliary power supply Siemens Protection Devices Limited 0
11 5 Time Delayed OC&EF Operation Non directional Elements Phase, Derived Earth, Measured Earth Setting Range Is (5) 0., 0..0xIn Setting Range Is (5G) 0.06, xIn Setting Range Is (5N) 0.0, xIn Time Multiplier 0.0, Time Delay (DTL) 0.00, s Operate Level 0 % Is, ± 5 % or ± %xin Reset level 90 % Iop Operate time (with auxiliary power/ load K top = Tm current) I α [ Is ] IEC A top = + B Tm P [ Is ] IEEE/ANSI ± 5 % or ± 50 ms # Follower Delay 0.00, s Reset IEC/ANSI decaying, 0, s Inhibited by Binary Input # Add current tolerance of ± 5 % or ± %xin (whichever is greater) to the operating time tolerance for TMS below 0. and Is below LC/SOTF (Switch-On-To-Fault) Inrush Response Test Test Conditions Test Result Simulated Inrush current with 5 % nd harmonic content The immunity against inrush currents is up to times of the peak value with 95 % fundamental current (Iset). Setting range,,...0xin Operate level 00 % Is, ± 5 % Disengaging time < 50 ms For more information about 50LC/SOTF, refer to SOTF. Real Time Digital Simulation Test (RTDS) Trip Response at different fault currents Influence on Accuracy Trip response at recurring faults Fault current:.,,, 5, 0 times of set value Influence of DC components DC content at first peak : 00 % Decay time: 5 ms, 50 ms, 00 ms Immunity to inrush current nd harmonic content : up to 8 % Relay behaviour at primary CT saturation Fault currents: 0 A, 0 A, 0 A Fault Current: times and 5 times of set value. Delay between recurring faults: 00 ms, s, s Siemens Protection Devices Limited
12 Case Dimensions Current Inputs Additional Binary Inputs Additional Binary Outputs Rear Communication Port Binary Inputs, Binary Outputs, Flag Output, Pulse Output Auxiliary Power Supply Fig 6a. Front View (7SR50) Fig 6b. Front View (7SR50/7SR50) Fig 7. Rear View (Dual Powered Full Version) Holes Holes mm clearance for Terminal Wiring Fig 9a. Side View (7SR50/7SR50) mm clearance for Terminal Wiring Fig 8a. Panel Cut-out View (7SR50/7SR50) Fig 8b. Panel Cut-out View (7SR50/7SR50) Fig 9b. Side View (7SR50/7SR50) Siemens Protection Devices Limited
13 7SR50/7SR50 Terminal/Wiring Diagram 7SR50 Terminal Label 5 X BI BI X IL A/5A A/5A NO 6 COM 7 BO IL NC BO A/5A 5 IL PO A/5A 6 7 GND 5 6 FO IL 8 NOTES Items shown in BOLD are ordering options Figure 0 Terminal Diagram of Self Powered (7SR50-xGB0-AA0) and (7SR50-xGB0-AA0) Non-Directional Overcurrent and Earth Fault Relay with Flag 7SR50 Terminal Label X BI BI X5 IL A/5A A/5A NO X IL COM NC 5 6 BO BO IL A/5A 5 X PO A/5A 6 7 IL GND 8 NOTES Items shown in BOLD are ordering options Figure Terminal Diagram of Self Powered (7SR50-xGA0-AA0) and (7SR50-xGA0-AA0) Non-Directional Overcurrent and Earth Fault Relay without Flag Siemens Protection Devices Limited
14 7SR50 Terminal/Wiring Diagram 7SR50 Terminal Label - ve X5 BI BI 5 X - ve BI BI X IL A/5A A/5A X TERM A/+ GND B/- RS85 X6 NO COM NC 5 NO 6 COM BO NC BO BO BO IL IL A/5A 5 L N E X GND ve - ve PO FO IL A/5A NOTES Items shown in BOLD are ordering options Figure Terminal Diagram of Dual Powered (7SR50) Non-Directional Overcurrent and Earth Fault Relay Siemens Protection Devices Limited
15 Ordering Information 7SR5 Argus Product description Variants Order No SR5 Argus 7 S R A A 0 Nondirectional Overcurrent and Earth Fault Relay Case, I/O and fascia Size Moulded Case, CT ), BI/ BO, pulse output, 9 LEDs G A/B Size Moulded Case, CT ), BI/ BO, pulse output, 9 LEDs H/J A Size Moulded Case, CT ), BI/ BO, pulse output, 9 LEDs H/J B Size Moulded Case (Height Reduced), CT ), BI/ BO,pulse output, 9 LEDs G A/B Size Moulded Case (Height Reduced), CT ), BI/ BO,pulse output, 9 LEDs H/J A Size Moulded Case (Height Reduced), CT ), BI/ BO,pulse output, 9 LEDs H/J B Measuring Input A, 50/60Hz 5 A, 50/60Hz Auxiliary Voltage Self Powered (CT Powered: BI Threshold 9 V DC) Dual powered (CT Powered+Aux.Powered: to 60 V DC, BI threshold 9V DC) Dual powered (CT Powered+Aux.Powered:60 to 0 V AC/DC, BI threshold 88V AC/DC) G H J Front Fascia Standard Version Standard Version - with Trip Flag Indicator A B Communication Options Front port : USB Front Port : USB and Rear Port : RS-85 supporting IEC and Modbus RTU (user selectable setting) Protection Function Packages - Standard version 50 Instantaneous phase fault overcurrent 50G/50N Instantaneous earth fault 5 Time delayed phase fault overcurrent 5G/5N Time delayed earth fault 50LC/SOTF Switch-On-To-Fault A Additional functionality No additional functionality A ) CT is configured as PF + EF Use the following ordering information to order 7SR5 Argus Self Powered/Dual Powered Non-Directional Overcurrent and Earth Fault Relay battery spares. Variants 7XG900-AA00-0AA0 7XG900-AA00-0AA0 7XG900-AA00-0AA0 Description Main Battery CRA RTC Battery CR6 Main Battery CRA + RTC Battery CR6 Siemens Protection Devices Limited 5
16 Published by and copyright 08 Siemens Protection Devices Limited P.O. Box 8 North Farm Road Hebburn Tyne & Wear NE TZ United Kingdom Phone: + (0) Fax: + (0) marketing.spdl.gb@siemens.com EMEA-C GB June 08 For enquires please contact our Customer Support Center Phone: +9 80/5 87 (hrs) Fax: +9 80/5 7 support.energy@siemens.com Subject to change without notice, Printed in the UK. www. siemens.com/energy Siemens Protection Devices Limited 6
Reyrolle 7SR45 Self/Dual Powered Overcurrent Protection. Catalogue Reyrolle 7SR45 Edition 1. siemens.com/reyrolle
Reyrolle 7SR45 Self/Dual Powered Overcurrent Protection Catalogue Reyrolle 7SR45 Edition 1 siemens.com/reyrolle 2 Digital Grid 7SR45 Self Powered/Dual Powered Non-Directional Overcurrent and Earth Fault
More informationReyrolle Protection Devices. 7SG117 Argus 7 Synchronising Relay. Answers for energy
Reyrolle Protection Devices 7SG117 Argus 7 Synchronising Relay Answers for energy 7SG117 Argus 7 Synchronising Relay Fig 1. Independent check & system synchronising settings Adjustable slip frequency,
More informationReyrolle Protection Devices. 7SR10 Argus Overcurrent and Earth Fault Relay
Reyrolle Protection Devices 7SR10 Argus Overcurrent and Earth Fault Relay 7SR10 Argus Overcurrent and Earth Fault Relay Control 79 Auto Reclose 86 Lockout CB Control CB Trip/Close Features Cold Load Settings
More informationSIPROTEC easy 7SJ45 Numerical Overcurrent Protection Relay Powered by CTs
SIPROTEC easy 7SJ4 Numerical Overcurrent Protection Relay Powered by CTs Function overview Fig. /1 Description The SIPROTEC easy 7SJ4 is a numerical overcurrent protection relay which is primarily intended
More informationRelion 605 series. Self-powered feeder protection REJ603 Product Guide
Relion 605 series Relion 605 series Relion 605 series Self-powered feeder protection Product Guide Product version: 3.0 Contents 1. Description... 3 2. Relay functions... 3 3. Protection functions... 4
More information7SR18 Solkor Line Differential Protection Energy Management
Reyrolle Protection Devices 7SR18 Solkor Line Differential Protection Energy Management 7SR18 Solkor five or eight user-programmable binary output contacts and three or six user programmable status inputs
More informationReyrolle Protection Devices. 7SG21 DDB20 Multi Range Digital Setting Time Delay Relay. Energy Management
Reyrolle Protection Devices 7SG21 DDB20 Multi Range Digital Setting Time Delay Relay Energy Management 7SG21 DDB20 Digital Time Delay Induction disc reset emulation Replacement of induction disc timing
More informationReyrolle Protection Devices. 7SG118 Argus 8 Voltage & Frequency Relay. Answers for energy
Reyrolle Protection Devices 7SG118 Argus 8 Voltage & Frequency Relay Answers for energy 7SG118 Argus 8 Voltage and Frequency Relay Data Storage and Communication Serial communications conform to IEC60870-5-103
More informationReyrolle Protection Devices. 7SR45 Argus Self Powered/Dual Powered Non-Directional Overcurrent and Earth Fault Relay
Reyrolle Protection Devices 7SR45 Argus Self Powered/Dual Powered Non-Directional Overcurrent and Earth Fault Relay 2018 Siemens Protection Devices Limited 2 7SR45 Argus Contents Contents Technical Manual
More informationRelion 611 series. 611 series Type Test Certificate
Relion 611 series 611 series Document ID: 1MRS757466 Issued: 2016-02-22 Revision: B Product version: 2.0 Copyright 2016 ABB. All rights reserved Table of contents Table of contents Section 1 Section
More information7SR23 DAD High Impedance Protection Relay Energy Management
Reyrolle Protection Devices 7SR23 DAD High Impedance Protection Relay Energy Management 2 Siemens Protection Devices Limited 7SR23 DAD High Impedance Relay User Interface 20 character x 4 line backlit
More informationType MVTT 14 and MVTT 15: Static Digital Time delay relays
Type MVTT 4 and MVTT 5: Static Digital Time delay relays Features 000/ setting range Time settings easily selected by means of thumbwheel switches Provide time delayed pick-up, or drop-off Compact construction
More informationReyrolle Protection Devices. 7SR11 and 7SR12 Argus Overcurrent Relays. Answers for energy
Reyrolle Protection Devices 7SR11 and 7SR12 Argus Overcurrent Relays Answers for energy 7SR11 and 7SR12 Argus Overcurrent Relays Control 79 Auto Reclose 86 Lockout CB Control Features Cold Load Settings
More informationProtection Relays PHASE & RESIDUAL OVERCURRENT
Protection Relays PHASE & RESIDUAL OVERCURRENT Application The relay type NA016 can be used in radial networks as feeder or power transformer protection. In solidly grounded systems the residual overcurrent
More informationReyrolle Protection Devices. 7SR11 and 7SR12 Argus Overcurrent Relays. Answers for energy
Reyrolle Protection Devices 7SR11 and 7SR12 Argus Overcurrent Relays Answers for energy 7SR11 and 7SR12 Argus Overcurrent Relays 74T/CCS Trip & Close Circuit Supervision 60VTS VT Supervision Control 79
More informationIRI1-ES Sensitive Earth Fault Current Relay. Manual IRI1-ES (Revision A)
IRI1-ES Sensitive Earth Fault Current Relay Manual IRI1-ES (Revision A) Woodward Manual IRI1-ES GB Woodward Governor Company reserves the right to update any portion of this publication at any time. Information
More informationFeeder protection relay SPAA 121 C. Product Guide
Issued: April 1999 Status: Updated Version: C/06.03.2006 Data subject to change without notice Features Two-phase low-set phase overcurrent unit with definite time or inverse time characteristic Two-phase
More informationReyrolle Protection Devices. 7SR242 Duobias Transformer Protection Relay. Energy Management. Unrestricted
Reyrolle Protection Devices 7SR4 Duobias Transformer Protection Relay Energy Management Unrestricted Unrestricted Siemens Protection Devices Limited 7SR4 Duobias Transformer Protection Relay User Interface
More informationHigh-Tech Range IRI1-ES- Sensitive Earth Fault Current Relay
High-Tech Range IRI1-ES- Sensitive Earth Fault Current Relay IE ON RESET.5 X1 t IE X1.6%.2.4.8 1.6 X1.1s.2.4.8 1.6 X2 OFF ON S1 S2 IRI1-ES IRI1-ES C&S Electric Limited (Protection & Control Division) Contents
More informationRE22R2CMR Off-delay Timing Relay s 300h V AC/DC - 2C/O
Characteristics Off-delay Timing Relay - 0.05s 300h - 24 240V AC/DC - 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Complementary Contacts
More informationGRD130 - FEATURES APPLICATION
FEATURES Phase undervoltage protection with IDMTL or DTL. Phase overvoltage protection with IDMTL or DTL. Zero phase sequence overvoltage (neutral voltage displacement) protection with IDMTL/DTL. Negative
More informationRE22R2AMR On-delay Timing Relay s 300h V AC/DC - 2C/O
Characteristics On-delay Timing Relay - 0.05s 300h - 24 240V AC/DC - 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Complementary Contacts
More informationAuxiliary Units for 7SR23 High Impedance Protection Energy Management
Reyrolle Protection Devices Auxiliary Units for High Impedance Protection Energy Management Siemens Protection Devices Limited 2 Auxiliary Units for High Impedance Protection Description 7XG15 High Impedance
More informationCombined Overcurrent and Earth-fault Relay SPAJ 140 C. Product Guide
Combined Overcurrent and Earth-fault Product Guide Issued: April 1999 Status: Updated Version: C/18.04.2006 Data subject to change without notice Features Three-phase, low-set phase overcurrent unit with
More informationRE22R2KMR Off-delay Timing Relay s 10min V AC/DC - 2C/O
Characteristics Off-delay Timing Relay - 0.05s 10min - 24 240V AC/DC - 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Complementary Contacts
More informationRE22R2QGMR Star-Delta Timing Relay s 300h V AC/DC - 2C/O
Characteristics Star-Delta Timing Relay - 0.05s 300h - 24 240V AC/DC - 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Complementary Contacts
More informationRE17LAMW on-delay timing relay - 1 s..100 h V AC/ DC - solid state output
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC/ DC - solid state output Main Range of product Product or component type Discrete output type Width Component name Time delay type Time
More informationTM3AI4 module TM3-4 analog inputs
Characteristics module TM3-4 analog inputs Main Range of product Product or component type Range compatibility Analogue input number 4 Analogue input type Complementary Analogue input resolution Permissible
More informationEarth-fault Relay SPAJ 110 C. Product Guide
Issued: April 1999 Status: Updated Version: C/12.04.2006 Data subject to change without notice Features Low-set neutral overcurrent stage with definite time or inverse time characteristic High-set neutral
More information7SR158 Argus Voltage and Frequency Relay Energy Management.
Reyrolle Protection Devices 7SR158 Argus Voltage and Frequency Relay Energy Management. Siemens Protection Devices Limited 2 7SR158 Argus Voltage & Frequency Relay User Interface 20 Character x 4 Line
More informationReyrolle Protection Devices. 7SG13 Delta Protection and Control Relays. Answers for energy
Reyrolle Protection Devices 7SG13 Delta Protection and Control Relays Answers for energy 7SG13 Delta Protection and Control Relays User Interface 20 character x 2 line backlit LCD Menu navigation keys
More informationRM35JA32MR Current control relay 0.15A 15A, 2 C/O
Characteristics Current control relay 0.15A 15A, 2 C/O Main Range of product Product or component type Relay type Relay name Relay monitored parameters Time delay type Switching capacity in VA Measurement
More informationRE17LCBM off-delay timing relay - control - 1 s..100 h V - solid state output
Characteristics off-delay timing relay - control - 1 s..100 h - 24..240 V - solid state output Main Range of product Product or component type Discrete output type Width Component name Time delay type
More informationArc protection relay. Features Three-phase overcurrent function. Application
Arc protection relay REA 10_ Page 1 Issued: May 1999 Status: New Data subject to change without notice Features Three-phase overcurrent function Loop-type or radial sensor fibre for arc detection Two high-speed
More informationRE22R1QMQ star-delta timing relay - 230VAC/440VAC - 1 C/O
Characteristics star-delta timing relay - 230VAC/440VAC - 1 C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Complementary Contacts type
More informationTM3TI8T module TM3-8 inputs temperature
Characteristics module TM3-8 inputs temperature Main Range of product Product or component type Range compatibility Analogue input number 8 Analogue input type Complementary Analogue input resolution Input
More informationSensitive definite time or inverse time earth-fault stage for back-up residual earthfault
Issued: April 1999 Status: Updated Version: B/09.11.2001 Data subject to change without notice Features Sensitive restricted earth-fault protection stage for fast, selective earth-fault protection Sensitive
More informationTM3TI4 module TM3-4 inputs temperature
Characteristics module TM3-4 inputs temperature Main Range of product Product or component type Range compatibility Analogue input number 4 Analogue input type Complementary Analogue input resolution Permissible
More informationReyrolle Protection Devices. 7SR210 & 7SR220 Argus Overcurrent Protection Relay. Answers for energy
Reyrolle Protection Devices 7SR10 & 7SR0 Argus Overcurrent Protection Relay Answers for energy 7SR10 7SR0 Argus Overcurrent Protection Relay Additional Functionality 7SR0n Directional Relay 7/59 Under/Over
More informationTM3TM3 module TM3-2 temperature inputs and 1 analog output
Characteristics module TM3-2 temperature inputs and 1 analog output Main Range of product Product or component type Range compatibility Analogue input number 2 Analogue input type Analogue output number
More information7XG225-3RMLG Test Block System Answers for infrastructure & cities.
Reyrolle Protection Devices 7XG5-3RMLG Test Block System Answers for infrastructure & cities. Siemens Protection Devices Limited 7XG5-3RMLG Test Block System Application Test blocks enable test technicians
More informationBus Bar Protection Relay B-PRO 4000
Bus Bar Protection Relay B-PRO 4000 Product Overview The IEC 61850 station bus embedded B-PRO 4000 relay provides complete bus and substation differential protection (low impedance) with CT saturation
More informationReyrolle Catalogue Answers for Energy
Reyrolle Protection Devices Reyrolle Catalogue Answers for Energy Index Compact Overcurrent Argus C 7SR11 & 7SR12 1 Multifunction Overcurrent Argus M 7SR21 & 7SR22 2 Multifunction Reclose Controller Recloser
More informationINSTRUCTION MANUAL TRIP CIRCUIT SUPERVISION RELAY GKAD1
INSTRUCTION MANUAL TRIP CIRCUIT SUPERVISION RELAY GKAD1 TOSHIBA Corporation 2004 All Rights Reserved. ( Ver. 1.6 ) Safety Precautions Before using this product, please read this chapter carefully. This
More informationOvercurrent and Arc Protection by Reyrolle Alexander Erokhin. 21, 2017 I Berlin
Overcurrent and Arc Protection by Reyrolle Alexander Erokhin VAR Partner Day September 20-21, 21, 2017 I Berlin Reyrolle Product Range by SIEMENS Challenges We Meet for our Customers Easy-to-use protection
More informationReyrolle Protection Devices. 7PG2113/4/5/6 Solkor Pilot Wire Current Differential Protection with integrated Overcurrent Guard. Answers for energy
Reyrolle Protection Devices 7PG2113/4/5/6 Solkor Pilot Wire Current Differential Protection with integrated Overcurrent Guard Answers for energy 7PG2113/4/5/6 Solkor Pilot Wire Current Differential Protection
More informationRT4F-110V/25A RECTIFIER
The RT4F-110V/25A is a hot-pluggable switched mode rectifier (SMR) module designed to provide up to 25A of output current into a 110V nominal system. Examples of such systems are 60 cells lead acid (136V
More informationTM3DI16 module TM3-16 inputs
Characteristics module TM3-16 inputs Main Range of product Product or component type Range compatibility Jun 30, 2018 Modicon TM3 Discrete input module Modicon M241 Modicon M251 Modicon M221 Discrete input
More informationSensitive Earth-fault Relay SPAJ 111 C. Product Guide
Issued: April 1999 Status: Update Version: C/12.04.2006 Data subject to change without notice Features Sensitive low-set neutral overcurrent stage with definite time characteristic High-set neutral overcurrent
More informationContact protection relay
Contact protection relay Ordering details SVR 450 08 F0000 The protects sensitive control contacts from excessive load. It can be used with latching function or without. Bounce time of control contacts
More informationTM221CE40R controller M IO relay Ethernet
Characteristics controller M221 40 IO relay Ethernet Main Range of product Product or component type [Us] rated supply voltage Jan 6, 2019 Modicon M221 Logic controller 100...240 V AC Discrete input number
More informationTM221M16TG controller M IO transistor PNP spring
Characteristics controller M221 16 IO transistor PNP spring Main Range of product Product or component type [Us] rated supply voltage Discrete input number Analogue input number Discrete output type Discrete
More informationRT4B-110V/12A RECTIFIER
The RT4B-110V/12A is a switched mode rectifier (SMR) module designed to provide up to 12A of output current into a 110V nominal system. It can be used with or without a cooling fan. With a fan it runs
More information02/11/2015
DIN Rail Mount 22.5 mm TU2R1 Part number 88865305 Product with 1 relays (88 865 100/103/105/115/125/135/145/155/185/503) : Replaced by the 17,5 mm range For instance : previous part number 88 865 XXX /
More informationRE22R2AMR On-delay Timing Relay s 300h V AC/DC - 2C/O
Characteristics Ondelay Timing Relay 0.05s 300h 24 240V AC/DC 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Zelio Time Modular timing
More informationTM221M32TK controller M IO transistor PNP
Characteristics controller M221 32 IO transistor PNP Main Range of product Product or component type [Us] rated supply voltage Discrete input number Analogue input number Discrete output type Discrete
More informationRE22R2QTMR Star-Delta Timing Relay s 300h V AC/DC - 2C/O
Characteristics StarDelta Timing Relay 0.05s 300h 24 240V AC/DC 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Zelio Time Modular timing
More informationTM221M16R controller M IO relay
Product data sheet Characteristics TM221M16R controller M221 16 IO relay Complementary Main Discrete I/O number 16 Number of I/O expansion module Supply voltage limits Inrush current Power consumption
More informationTM241C40U controller M IO transistor NPN
Characteristics controller M241 40 IO transistor NPN Main Range of product Product or component type [Us] rated supply voltage 15/12/2018 Modicon M241 Logic controller 24 V DC Discrete input number 24
More information7SR11 and 7SR12 Argus Overcurrent Relays Answers for infrastructure & cities.
Reyrolle Protection Devices 7SR11 and 7SR12 Argus Overcurrent Relays Answers for infrastructure & cities. 7SR11 and 7SR12 Argus Overcurrent Relays Supervision 60CTS CT Supervision 74T/CCS Trip & Close
More informationMonitoring technique. VARIMETER Voltage relay MK 9064N, MH 9064
Monitoring technique VARIMETER Voltage relay MK 9064N, MH 9064 0269462 Your Advantages Preventive maintenance For better productivity Quicker fault locating Precise and reliable Min-, Max. value or window
More information02/11/2015
35 mm - 1 Relay 8A OUR1 Part number 88867105 Multi-function or mono-function Multi-range Multi-voltage Relay output 1 or 2 : 8 A - 250 V (10 A UL) LED status indicator Option of connecting an external
More informationTM241C24T controller M IO transistor PNP
Characteristics controller M241 24 IO transistor PNP Main Range of product Product or component type [Us] rated supply voltage Feb 13, 2018 Modicon M241 Logic controller 24 V DC Discrete input number 14
More informationRE17LAMW on-delay timing relay - 1 s..100 h V AC/DC - solid state output
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC/DC - solid state output Complementary Control type Voltage range Main Range of product Product or component type Discrete output type Width
More informationSafety Standards. Model Number:
040APS Highlights & Features Compliant to IEC 60601-1 3rd edition IT and medical safety approvals Low earth leakage Current (
More informationSafety Standards. Model Number:
040APS15 B Highlights & Features Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationCommunication Gateway COM 610. Product Guide
Communication Gateway COM 610 Product Guide Issued: September 2004 Status: Updated Version: D/17.10.2006 Data subject to change without notice Features Protocol conversion gateway for substation automation:
More informationSafety Standards. Model Number: Unit Weight:
MEA-250A24C Highlights & Features Meet Efficiency Level VI Safety Approvals to IEC 60601-1 3.1 Ed. & IEC 60950-1 Compliant with IEC 60601-1-2 3 th and 4 th Ed. Requirements IP22 ingress protection rating
More informationRE22R1AMR On-delay Timing Relay s 300h V AC/DC - 1C/O
Characteristics On-delay Timing Relay - 0.05s 300h - 24 240V AC/DC - 1C/O Product availability : Stock - Normally stocked in distribution facility Price* : 59.76 USD Main Range of product Product or component
More informationRM22TG. Product data sheet Characteristics. three-phase control relay Vac, 2 C/O. Main. Complementary. Network number of phases
Characteristics three-phase control relay 183 528Vac, 2 C/O Main Range of product Product or component type Relay type Network number of phases Relay name Relay monitored parameters Time delay type Switching
More informationCombined Overcurrent and Earth-fault Relay SPAJ 141 C. Product Guide
Combined Overcurrent and Earth-fault Product Guide Issued: April 1999 Status: Updated Version: C/19.04.2006 Data subject to change without notice Features Three-phase, low-set phase overcurrent unit with
More informationTM3SAC5RG SAFETY MODULE FOR PLC TM2xx, 1 FUNCTION, CAT3, SPRING TERMINALS
Characteristics SAFETY MODULE FOR PLC TM2xx, 1 FUNCTION, CAT3, SPRING TERMINALS Main Range of product Product or component type Device short name Safety module application Function of module Jun 29, 2018
More informationVoltage regulator. SPAU 341 C 1MRS MBG Issued: July 1998 Status: Revised Version: C/ Data subject to change without notice
Issued: July 1998 Status: Revised Version: C/08.10.2003 Data subject to change without notice Features Comprehensive voltage regulation for power transformers with on-load tapchangers in distribution substations
More informationRT4F-48V/50A-WAC RECTIFIER
The RT4F-48V/50A-WAC is a switched mode rectifier (SMR) module designed to provide up to 58A of output current into a 48V nominal system, over a wide range of AC input voltage. This rectifier has been
More informationGRE130. Protection and Control for MV Systems
Protection and Control for MV Systems FEATURES Phase undervoltage protection with IDMTL or DTL(27). Phase overvoltage protection with IDMTL or DTL(59). Zero phase sequence overvoltage (neutral voltage
More informationTM3TI4 module TM3-4 inputs temperature
Characteristics module TM3-4 inputs temperature Complementary Analogue input resolution Permissible continuous overload Input impedance LSB value Conversion time Sampling duration Main Range of product
More informationTM241C40R controller M IO relay
Characteristics controller M241 40 IO relay Main Range of product Product or component type [Us] rated supply voltage Mar 09, 2017 Modicon M241 Logic controller 100...240 V AC Discrete input number 24
More informationArc protection relay. Features Three-phase overcurrent function. Application
Arc protection relay REA 10_ Issued: May 1999 Status: Updated Version: B/12.11.2001 Data subject to change without notice Features Three-phase overcurrent function Loop-type or radial sensor fibre for
More informationATV310H075N4E variable speed drive ATV kw - 1 hp V - 3 phase
Characteristics variable speed drive ATV310-0.75 kw - 1 hp - 380...460 V - 3 phase Main Range of product Altivar Easy 310 Product or component type Product specific application Assembly style Device short
More informationSyr-line TMR48D Digital Timer
yr-line MR48D Digital imer Front Panel 48x48 (1/16 DIN) Large LED or LCD creen (13.2 mm) Multi-function and single-function Basic & Advance configuration modes Multi-range (0.05 s 9999 h) Multi-voltage
More informationMultifunction Transducer MT440
Multifunction Transducer MT440 Voltage and current auto range measurements up to 600V, 12.5A Universal wide auxiliary power supply range 24 300 Vdc, 40 276 Vac Power accuracy class 0.5 (EN 60 688), Up
More informationATV930U30M3 variable speed drive - ATV930-3kW - 200/240Vwith braking unit - IP21
Characteristics variable speed drive - ATV930-3kW - 200/240Vwith braking unit - IP21 Main Range of product Product or component type Device application Device short name Variant Product destination Mounting
More information08/07/2015
DIN Rail Mount 22.5 mm TUR1 Part number 88865105 Product with 1 relays (88 865 100/103/105/115/125/135/145/155/185/503) : Replaced by the 17,5 mm range For instance : previous part number 88 865 XXX /
More informationINTRODUCTION. The PL-50 MO and PM-250 families represent the. PM-250-H: Horizontal box. PM-250-V: Vertical box
INTRODUCTION The PL-50 MO units are available in the next mechanical version: The PL-50 MO and PM-250 families represent the different solutions that Team Arteche offers for motor protection. Both families
More informationTM221ME32TK controller M IO transistor PNP Ethernet
Product data sheet Characteristics TM221ME32TK controller M221 32 IO transistor PNP Ethernet Complementary Main Discrete I/O number 32 Number of I/O expansion module Supply voltage limits Inrush current
More informationTM221CE24R controller M IO relay Ethernet
Product data sheet Characteristics TM221CE24R controller M221 24 IO relay Ethernet Complementary Main Discrete I/O number 24 Number of I/O expansion module Supply voltage limits Network frequency Inrush
More informationInstallation / Control Technique
Installation / Control Technique Interface Relay, Interface Relay System Input-Output Interface Relay IK 3070, I_ 3070 0633 IK 3070 Circuit Diagrams IS 3070 According to IEC/EN 61 810-1 Relay, triac or
More informationTM221ME16T controller M IO transistor PNP Ethernet
Characteristics controller M221 16 IO transistor PNP Ethernet Main Range of product Product or component type [Us] rated supply voltage Discrete input number Analogue input number Discrete output type
More informationRT4F-120V/20A-WAC RECTIFIER
The RT4F-120V/20A-WAC is a switched mode rectifier/charger module designed to provide up to 20A of output current into a 120V nominal system. This charger has been designed for use in conjunction with
More informationElectronic timer CT-ERS.21
2CDC 251 057 F0t07 Features Rated control supply voltage 24 240 V AC/DC Single function ON delay timer One device includes 10 time ranges (0.05 s 300 h) 2 c/o contacts 2 LEDs for status indication Width
More informationEngyVolt RV12 and RV15
Technical Information EngyVolt RV12 and RV15 Multifunctional electrical energy meters for top-hat rail installation or panel mounting Application For measuring voltage, frequency, current, power, as well
More information1S20. Arc Fault Monitor Relay. Features. Introduction. ARC Fault Protection
Technical Bulletin Arc Fault Monitor Relay Features Compact, economic design Simple panel mounting for retrofit applications Two or three arc sensor inputs Two high speed tripping duty arc sense output
More informationElectronic timer CT-ERD.12
2CDC 251 092 F0t06 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied
More information040APS12 B MDS. MDS Medical AC-DC Open Frame 12Volt, 40Watt / MDS-040APS12 B ``` Highlights & Features. Safety Standards.
040APS12 B Highlights & Features Safety Approvals to IEC 60601-1 3rd ed. & IEC 60950-1 Risk management report available Low touch current (
More informationTM3DI16G module TM3-16 inputs spring
Characteristics module TM3-16 inputs spring Main Range of product Product or component type Range compatibility Modicon TM3 Discrete input module Modicon M221 Modicon M241 Modicon M251 Discrete input number
More informationMillenium 3. General Characteristics. General environment characteristics for CB, CD, XD, XR and XE product types
Millenium 3 General Characteristics Millenium 3 Compact Range Millenium 3 Expandable Range Millenium 3 Communication Options Millenium 3 Range General environment characteristics for CB, CD, XD, XR and
More informationAPU 200 Automatic DATA SHEET Gen-set Controller DATA SHEET
APU 200 Automatic DATA SHEET Gen-set Controller DATA SHEET Measurement input, auto range Up to 1000 V AC L-L Up to 12.5 A (sinusoidal) 16 400 Hz Output Up to four analogue outputs Relay output RS 485 Modbus
More informationResidual overvoltage relay
Page 1 Issued: April 1999 Status: New Data subject to change without notice Features Definite-time residual overvoltage earthfault protection and supervision Two independent operation stages, e.g. one
More information400AUS24 B MDS AUS. MDS Medical AC-DC Open Frame 24Volt, 400Watt / MDS-400AUS24 B. General Description. Model Information. Model Numbering ```
400AUS24 B Highlights & Features Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationElectronic timer CT-EBD.12 Flasher starting with ON with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-EBD.12 Flasher starting with ON with 1 c/o (SPDT) contact The CT-EBD.12 is an electronic time relay with the function flasher starting with ON. It is from the CT-D range.
More information