General Specifications

Size: px
Start display at page:

Download "General Specifications"

Transcription

1 Series CW Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications CWS CWS CWT Electrical Capacity Power Level: or Resistive Load 50V C Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance: 500 megohms 500V DC Dielectric Strength:,500V C minimum between contacts for minute minimum 3,000V C minimum between contacts & case for minute minimum Mechanical Life: 30,000 operations minimum Electrical Life: 0,000 operations minimum with Resistive Load & 6,000 operations with Inductive Load Nominal Operating orce:.50n ngle of Throw: 30 Operating Temperature Range: 0 C ~ +70 C (+4 ~ +58 ) Materials & inishes Rocker: Polycarbonate Stationary Contacts: Silver alloy Housing: Polyamide ase: Laminated thermosetting sheets Movable Contactor: rass with silver alloy plating Contact Terminals: Copper with silver plating Movable Contacts: Silver alloy Common Terminals: rass with silver plating Electrical Capacity Power Level: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating orce: or Resistive Load 50V C 0 milliohms maximum 500 megohms 500V DC,500V C minimum between contacts for minute minimum 3,000V C minimum between contacts & case for minute minimum 30,000 operations minimum 0,000 operations minimum with Resistive Load & 6,000 operations with Inductive Load 6.50N for single pole models; 0.0N for double pole models ngle of Throw: 30 Operating Temperature Range: 0 C ~ +70 C (+4 ~ +58 ) Materials & inishes Rocker: Polycarbonate Stationary Contacts: Silver alloy Housing: Polyamide ase: Laminated thermosetting sheets Movable Contactor: eryllium copper w/silver alloy plating Terminals: rass with silver plating Movable Contacts: Silver Electrical Capacity Power Level: or Resistive Load 5V C; 50V C; 30V DC Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance:,000 megohms 500V DC Dielectric Strength:,000V C minimum between contacts for minute minimum,500v C minimum between contacts & case for minute minimum Mechanical Life: 50,000 operations minimum Electrical Life: 5,000 operations minimum Nominal Operating orce:.0n ngle of Throw: 30 Operating Temperature Range: 5 C ~ +70 C ( 3 ~ +58 ) Materials & inishes Rocker: Glass fiber reinforced polyamide ase: LCP (Liquid Crystal Polymer) Housing: Polyamide Contact Terminals: rass + silver with silver plating Movable Contactor: Phosphor bronze w/silver plating Common Terminals: rass with silver plating Movable Contacts: Silver alloy

2 Miniature Power Rockers Series CW Distinctive Characteristics CWS Low cost molded rocker. See-saw contact mechanism Stable stationary contact construction for high reliability. Easily installed with snap-in mounting. Large terminal hole dimensioned.067 x.098 (.7mm x.5mm) simplifies wiring and soldering. Wave Soldering (PC version): See Profile in Supplement section. Manual Soldering: See Profile in Supplement section. CWS Low cost molded rocker. Snap-acting contact mechanism gives smooth actuation and audible feedback. Stable stationary contact construction for high reliability. ront panel, snap-in mounting for labor-saving installation. Solder lug/quick connect terminals can be used with connectors. Manual Soldering: See Profile in Supplement section. CWT Low cost molded rocker in compact, slim design. See-saw contact mechanism Outstanding insulation resistance and dielectric strength. Dust proof construction protects contact area. Stable stationary contact construction for high reliability. ront panel, snap-in mounting for labor-saving installation. Terminals are molded in and epoxy sealed to lock out flux, dust, and other contaminants. Manual Soldering: See Profile in Supplement section. Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 3

3 Series CW Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks CWS STNDRDS & CERTIICTIONS Specific CWS models listed below are qualified for Underwriters Laboratories Inc. recognition and Canadian Standards ssociation certification. culus marking on case is standard as noted in following table. CWS Model C culus ile No. Marking on Case CWS 50V E4445 Standard CWS 50V E4445 Standard Specific CWS models listed below are qualified for Underwriters Laboratories Inc. recognition and Canadian Standards ssociation certification. culus marking on case is standard as noted in following table. CWT Model C culus ile No. Marking on Case CWS 50V E4445 Standard CWS 50V E4445 Standard Specific CWT model listed below is qualified for Underwriters Laboratories Inc. recognition and Canadian Standards ssociation certification. culus marking on case is standard as noted in following table. Model C culus ile No. Marking on Case CWT 5V E4445 Standard 50V 4

4 Miniature Power Rockers Series CW CWS Pole SPST & SPDT TYPICL ORDERING EXMPLE CWSNS CWS Poles SPST DPST CWT Pole SPDT Circuits ON NONE O ON NONE ON Circuit ON NONE O TYPICL SWITCH ORDERING EXMPLES TYPICL ORDERING EXMPLE CWS Circuit ON NONE ON Cap Color lack Cap Color lack Cap Color lack Housing lack Housing lack Housing lack Terminals S Solder Lug N Inscription or SPST & SPDT No Code None or SPST Horizontal Vertical 3 Dot Marking No Code Inscription None (SPST only) Horizontal Vertical Dot Marking 3 (SPST only) S S H S Terminals Solder Lug Right ngle PC Terminals Quick Connect H Right ngle PC TYPICL ORDERING EXMPLE CWTS Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 5

5 Series CW Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks No Code Solder Lug None Not available in double pole. CWSNS Right ngle CWSNH Horizontal Orientation Only On-None-Off models are available with the horizontal inscription. INSCRIPTIONS TYPICL SWITCH DIMENSIONS OR CWS Single Pole No Inscription Vertical Orientation Only On-None-Off models are available with the vertical inscription. Single Pole Horizontal On-Off Inscription 3 Dot Marking Only Single Pole On-None- Off models are available with the dot inscription. The IEC symbols for On-Off are supplied with Single Throw models only. Orientation of inscription must be selected. Inscription color is white ink on black. (0.8).89 (5.5).60 (4.8).583 (0.).40 (5.5).60 (0.).40 (4.8).583 (0.8) (3.3).54 (.0).079 (.0).079 (5.5).7 (5.5).7 (5.6).64 NKK P/N This Side (.7) x (.5) Typ.067 x.098 b a (0.8).03 (7.0).669 (7.0) Typ.76 (0.5) Typ.00 (0.).008 (.9).4 Single throw model does not have terminal b (4.0).55 (6.0).630 (.0).47 (.).047 Single throw model does not have terminal b (.3).484 (0.8) Typ.03 b a (.3).484 (3.0).8 Terminal numbers are on side of switch body a b (8.5).78 (8.5).78 (7.0) Typ.76 Terminal numbers are on side of switch body (9.).756 Panel Thickness.030 ~.079 (0.75mm ~.0mm) b a (4.0).55 (.8) Dia Typ.07 6

6 Miniature Power Rockers Series CW (.).83 (5.8).6 (0.6).47 (5.).594 (6.).638 (4.8).89 (9.0) (0.6).47 (5.).594 (5.8).6 (.) (.0).079 (.0) (3.45).530 (5.7).4 (5.7).4 (5.5).7 (.5).059 TYPICL SWITCH DIMENSIONS OR CWS NKK P/N This Side (6.).638 (4.).559 Double Pole Vertical On-Off Inscription Single Pole Dot Inscription TYPICL SWITCH DIMENSIONS OR CWT (5.5).60 (7.8).70 (.0).039 (8.).39 (.5).886 (.3) Dia Typ.09 (.6) Dia Typ.063 (5.0).97 (.65).04 (4.0).57 (.0).039 (0.8).03 a Single Pole No Inscription NKK P/N This Side (.) x (.0) Typ.043 x.079 (0.8) Typ.03 3 (4.7) Typ.85 (3.5).38 (8.6).73 (7.4).685 (.6).496 (4.0).57 (8.0).709 a a a a (4.9).93 (5.0).97 (.6).496 (.5) Typ.098 (4.0) Typ.57 (4.75) Typ.87 a (0.8) Typ.03 Terminal numbers are on bottom of switch (.3) Typ.05 Terminal numbers are on bottom of switch 3 (5.0).97 (6.8).68 (.0).87 (.0) Typ.079 Terminal numbers are on side of switch body (4.0) Typ.57 Panel Thickness.030 ~.079 (0.75mm ~.0mm) (.5) Typ.098 a (4.9).93 (5.0).97 ootprint SPST (4.9).93 (5.0).97 (6.8).68 a a ootprint DPST (9.).756 (9.).756 Panel Thickness.030 ~.079 (0.75mm ~.0mm) (.8) Dia Typ.07 (4.7).85 (.8) Dia Typ.07 Quick Connect CWS Right ngle CWS3H Solder Lug CWTS Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 7

7 Series CWS Neon Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications Electrical Capacity (Resistive Load) Power Level: 5V C Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating orce: 0.0N ngle of Throw: 30 Materials & inishes Rocker: Housing: Movable Contactor: Movable Contacts: Stationary Contacts: Switch Terminals: Lamp Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Installation Soldering Time & Temp: Standards & Certifications UL: CS: 0 milliohms maximum 500 megohms 500V DC,500V C minimum between contacts for minute minimum; 3,000V C minimum between contacts & case for minute minimum 30,000 operations minimum 0,000 operations minimum Polycarbonate Polyamide eryllium copper with silver plating Silver alloy Silver alloy rass with silver plating rass with silver plating 0 C through +85 C ( 4 through +85 ) 90 ~ 95% humidity for C (04 ) 0 ~ 55Hz with peak-to-peak amplitude of 0.75mm traversing the frequency range & returning in minute; 3 right angled directions for hours 50G (490m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Manual Soldering: See Profile in Supplement section. ile No. E4445 5V C Markings on case are standard. ile No _0_000 5V C Markings on case are standard. 8

8 Neon Miniature Power Rockers Series CWS Distinctive Characteristics ull face, Neon illumination in choice of red, amber, or green. Neon lamp suited to 5V C applications. 9-amp electrical capacity in compact body. uilt-in resistor for direct connection to 5V C power source. Low cost molded rocker. ront panel, snap-in mounting assures labor-saving installation. Single-break, snap-acting contact mechanism gives smooth actuation and audible feedback. Quick-make, quick-break characteristic limits arcing and prolongs electrical life. Stable stationary contact construction for high reliability. Offset terminal alignment gives outstanding insulation resistance and dielectric strength. Solder lug/.87 quick connect terminals can be used with connectors. ctual Size Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 9

9 Series CWS Neon Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks Pole CWS Model Poles DPST Circuit ON NONE O TYPICL SWITCH ORDERING EXMPLE C C IMPORTNT: DESCRIPTION OR TYPICL ORDERING EXMPLE Red Rocker Cap DPST ON-NONE-O Circuit Solder Lug/ Quick Connect Terminals CWSCC POLE & CIRCUIT Red Neon Lamp lack Housing Rocker Position Connected Terminals Throw & Switch/Lamp Schematic Down Center Up Down Center Up Housing DP CWS ON NONE O -a -a OPEN OPEN DPST C D Neon Lamp Colors Red mber Green Switches are supplied with UL & CS markings on the case. Specific models & ratings noted on the General Specifications page. lack C D Cap Colors Red mber Green Terminals Note: Terminal numbers a & a are actually on the switch. Solder Lug/.87 (4.75mm) Quick Connect a a 0

10 Neon Miniature Power Rockers Series CWS (.).83 The Neon lamp is factory assembled and not available separately. The lamp circuit is synchronous to switching circuit. The electrical specifications shown are determined at a basic temperature of 5 C. Values for the built-in resistors are given in the accompanying table. HOUSING lack Housing with Snap-in Mounting On Off (I O) symbols are molded on the bezel. Cap Colors vailable C D Red mber Green (5.8).6 (0.6).47 (5.) (.0).079 (5.7).4 NEON LMP COLORS & SPECIICTIONS (6.).638 L o a d Colors Red mber Green Voltage V 5V C 5V C 5V C Internal Series Resistance 33K ohms 33K ohms 68K ohms Current I.4m.4m 0.6m Endurance Hours 5,000 5,000 8,000 TYPICL SWITCH DIMENSIONS (.0).039 (8.).39 (.3) Dia Typ.09 (.6) Dia Typ.063 (4.75) Typ.87 (.65).04 Neon Lamp Double Pole (7.4).685 (8.6).73 a Source CP COLOR CODES a a (.6).496 a C TERMINLS Solder Lug/.87 (4.75mm) Quick Connect (.5) Typ.098 (4.0) Typ.57 (4.0).57 (5.0).97 (0.8) Typ.03 (.5)R.045 (0.8)R.03 (4.75).87 Thk = (0.8).03 (9.).756 Panel Thickness.030 ~.079 (0.75mm ~.0mm) (8.).39 (.65).04 D Caps are factory assembled and are not available separately. Neon Illuminated CWSCC Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

11 Series CWSC LED Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications Electrical Capacity (Resistive Load) Power Level: 5V C or 50V C Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: 0 milliohms maximum 500 megohms 500V DC,500V C minimum between contacts for minute minimum; 3,000V C minimum between contacts & case for minute minimum 30,000 operations minimum 0,000 operations minimum Mechanical Life: Electrical Life: Nominal Operating orce: Single Pole 4.50N; Double Pole 0.0N ngle of Throw: 33 Materials & inishes Rocker: Housing: Movable Contactor: Movable Contacts: Stationary Contacts: Switch Terminals: Lamp Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Installation Soldering Time & Temp: Standards & Certifications UL: Polycarbonate Polyamide eryllium copper with silver plating Silver alloy Silver alloy rass with silver plating rass with silver plating 0 C through +50 C (+4 through + ) 90 ~ 95% humidity for C (04 ) 0 ~ 55Hz with peak-to-peak amplitude of.5mm traversing the frequency range & returning in minute; 3 right angled directions for hours 50G (490m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Manual Soldering: See Profile in Supplement section. ile No. E4445 ll models recognized at 5V C & 50V C. culus marking on case is standard.

12 LED Miniature Power Rockers Series CWSC Distinctive Characteristics ull face, bright LED illumination in choice of red, amber, or green for visible status indication. 9-amp or 6-amp electrical capacity in compact body. Interior shield prevents contamination of the rocker by carbon from arcing. ront panel, snap-in mounting assures labor-saving installation. Single-break, snap-acting contact mechanism gives smooth actuation and audible feedback. Quick-make, quick-break characteristic limits arcing and prolongs electrical life. Stable stationary contact construction for high reliability. Offset terminal alignment gives outstanding insulation resistance and dielectric strength. Solder lug/.0 quick connect terminals can be used with connectors. ctual Size Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 3

13 Series CWSC LED Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks CWSC Poles SPST DPST Circuit ON NONE O TYPICL SWITCH ORDERING EXMPLE JC IMPORTNT: Cap/Diffuser Colors JC JD J Clear/Red Clear/mber Clear/Green Switches are supplied with culus marking on the case. Specific models & ratings noted on the General Specifications page. Clear Rocker Cap with Red Diffuser DPST ON-NONE-O Circuit Solder Lug/ Quick Connect Terminals TYPICL ORDERING EXMPLE CWSCJCCS Housing lack C D Red LED LED Colors Red mber Green lack Housing C S S Terminals Solder Lug/.0 (.79mm) Quick Connect 4

14 LED Miniature Power Rockers Series CWSC Pole Model Rocker Cap/Diffuser Caps are factory assembled and are not available separately. On Off (I O) symbols are molded on the bezel. HOUSING lack Housing with Snap-in Mounting The LED is factory assembled and not available separately. LED circuit is isolated and requires an external power source. Polarity marks are on the bottom of the switch. The electrical specifications shown are determined at a basic temperature of 5 C. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement. POLE & CIRCUITS Rocker Position Connected Terminals Throw & Switch/Lamp Schematics Down Center Up Down Center Up SP CWSC ON NONE O -a OPEN OPEN SPST CP TYPES & COLORS LED SPECIICTIONS & COLORS S (+) (-) Colors: Cap/Diffuser Colors vailable JC JD J Clear/Red Clear/mber Clear/Green TERMINLS Solder Lug/.0 (.79mm) Quick Connect C (3.).6 (.6).063 Thk = (0.5).00 (7.).80 (.79).0 D Red mber Green Maximum orward Current I M 30m 30m 30m Typical orward Current I 0m 0m 0m orward Voltage V.95V.0V.V Maximum Reverse Voltage V RM 5V 5V 5V Current Reduction Rate above 5 C mbient Temperature Range Notes: Terminal numbers and polarity are actually on the switch. DP CWSC ON NONE O -a -a OPEN OPEN DPST (+) (-) (COM) (COM) a a I 0.4m/ C 0.9m/ C 0.39m/ C 0 C ~ +50 C (+) (-) a Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 5

15 Series CWSC LED Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks LED Illuminated CWSCJCCS LED Illuminated CWSCJCCS (5.7).68 (.).83 (5.7).68 (.).83 (0.6).47 (5.).594 (0.6).47 (5.).594 TYPICL SWITCH DIMENSIONS (.0).079 (.0).079 (5.7).4 (5.7).4 Single Pole NKK P/N This Side (7.7).697 Double Pole NKK P/N This Side (7.7).697 (7.).80 (7.).80 (.79) Typ.0 (0.5).00 (.79) Typ.0 (0.5).00 (5.5).7 (.6) Typ.063 (3.) Typ.6 (5.5).7 (.6) Typ.063 (3.) Typ.6 (4.5).77 (4.5).77 (8.6).73 (8.6).73 (4.95) Typ.95 (.7) Typ.067 a (.7) Typ.067 a a (4.95).95 (.6).496 a (.6).496 (0.5) Typ.00 (0.5) Typ.00 (.5) Typ.089 (.5) Typ.089 (9.).756 Panel Thickness.030 ~.079 (0.75mm ~.0mm) (9.).756 Panel Thickness.030 ~.079 (0.75mm ~.0mm) 6

16 Notes 7

General Specifications

General Specifications Series CW Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications CWS CWS Electrical Capacity Power Level:

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Full face, bright LED illumination in choice of red, green, and amber for visible status indication. 9-amp or 6-amp electrical capacity in compact body. Interior shield prevents

More information

General Specifications

General Specifications Series M00 Tipped Toggles Toggles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity

More information

General Specifications

General Specifications Series Process Sealed Subminiature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity

More information

General Specifications

General Specifications Series M00 Tipped Toggles Toggles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity

More information

General Specifications

General Specifications Series M00 Tipped Rockers & Paddles Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical

More information

General Specifications

General Specifications Miniature Rockers Slides Rotaries Programmable Illuminated P Pushbuttons eneral Specifications Electrical Capacity (Resistive Load) Power Level (silver): Logic Level (gold): Logic/Power Level (gold over

More information

General Specifications

General Specifications Series F Ultra-Thin Process Sealed Tactiles General Specifications Electrical Capacity (Resistive Load) Low/Logic Level: m @ V DC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength:

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Low Profile Pushbuttons Series UB Bright, full face, or spot illumination with red, amber, or green single-element LEDs (an integral part of the switch), plus square or rectangular

More information

Contents Rockers. A Series... B4 Process Sealed 0.4VA Logic Level Straight, Right Angle, & Vertical PC

Contents Rockers. A Series... B4 Process Sealed 0.4VA Logic Level Straight, Right Angle, & Vertical PC Contents Rockers Toggles Rockers Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons A Series... 4 Process Sealed 0.4VA Logic Level Straight,

More information

General Specifications

General Specifications Series M2 Process Sealed Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks eneral Specifications Electrical

More information

Distinctive Characteristics

Distinctive Characteristics Low Profile Process Sealed Tactiles Series J Distinctive Characteristics Special bracket for right angle mounting provides added design variations. igher operating force type provides more pronounced operating

More information

General Specifications

General Specifications Series M Slides Rotaries Programmable Illuminated P Pushbuttons eneral Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ 5V AC or A @ 50V AC; 4A @ 0V DC (On-On circuit) & A

More information

General Specifications

General Specifications Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level: 5A @ 25/250V AC or 5A @ 30V DC Other Ratings Contact Resistance: 0 milliohms

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Subminiature size (/ size of Series M switches) saves space on PC boards. Specifically developed for logic-level applications. Totally sealed body construction prevents contact

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Industry s first molded rocker with TV rating. Designed to handle large inrush current. JWM models certified for TV-5 rating and JWL models for TV-8 rating. Special 5A @ 7V

More information

General Specifications

General Specifications Series Illuminated Low Profile Process Sealed Tactiles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles General Specifications

More information

6mm 3VA DC Power Level or 0.4VA Logic Level Straight PC PCB Mount. 6mm SMT 3VA DC Power Level & 0.4VA Logic Level Gull Wing Terminals Upright Mount

6mm 3VA DC Power Level or 0.4VA Logic Level Straight PC PCB Mount. 6mm SMT 3VA DC Power Level & 0.4VA Logic Level Gull Wing Terminals Upright Mount Contents Tactiles C Series... mm Process Sealed m Low/Logic Level PC Mount C Series...8 mm SMT Process Sealed m Low/Logic Level Gull Wing Terminals Upright Mount HP Series... mm V DC Power Level or.v Logic

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics vailable in flat frame and bracketed PC mounting types. Over-center actuator block and plunger design gives crisp actuation with clear indication of circuit status; this design

More information

TYPICAL SWITCH ORDERING EXAMPLE BARRIER TYPES. R No Barrier B With Barrier CAP COLORS. A Black B Ivory. Red. H Gray INSCRIPTION ORIENTATION

TYPICAL SWITCH ORDERING EXAMPLE BARRIER TYPES. R No Barrier B With Barrier CAP COLORS. A Black B Ivory. Red. H Gray INSCRIPTION ORIENTATION TYPICAL SWITC ORDERING EXAMPLE JW L R C A M L RATINGS TV5 Rated 0A @ 5/50V AC TV8 Rated 6A @ 5/50V AC ARRIER TYPES R No arrier With arrier OUSING COLORS A lack POLES SPST SPDT * DPST DPDT * DPST must have

More information

General Specifications

General Specifications Series General Specifications Electrical Capacity (Resistive Load) Low/Logic Level: m @ V DC maximum for Standard Operating Force models m @ V DC maximum for igh Operating Force models Other Ratings Standard

More information

General Specifications

General Specifications General Specifications Electrical apacity (Resistive Load) Low/Logic Level: m @ V D Other Ratings ontact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal

More information

General Specifications

General Specifications Series SK General Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ 5V AC for low & medium security; A @ 50V AC for low security Other Ratings Contact Resistance: Insulation

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Low Profile Pushbuttons Series UB Bright or super bright LEDs (an integral part of the switch) of red, amber, green, blue, or white, in full face or spot illumination plus square

More information

Rockers Contents M S eries... Snap-in Mount A Power Level & 0.VA Logic Level Solder Lug, Quick Connect, Straight PC, & Wirewrap M S eries... 7 rackete

Rockers Contents M S eries... Snap-in Mount A Power Level & 0.VA Logic Level Solder Lug, Quick Connect, Straight PC, & Wirewrap M S eries... 7 rackete Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons 日本 NKK 官网的英文船型开关说明书 Contents Rockers A S eries... Process Sealed 0.VA Logic Level Straight, Right Angle, & Vertical PC

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Top or side actuation permits flexible board design. Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively

More information

General Specifications

General Specifications Series M Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks eneral Specifications Electrical Capacity

More information

General Specifications

General Specifications Ultra-Miniature Slides General Specifications Electrical Capacity (Resistive Load) ower Level (silver): 0.A @ 0V DC Logic Level (gold): 0.VA maximum @ 8V AC/DC maximum (Applicable Range 0.mA ~ 0.A @ 0mV

More information

General Specifications

General Specifications Series NP01 Subminiature Smooth ctuation Pushbuttons General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4V maximum @ 28V C/C maximum (pplicable Range 0.1m ~ 0.1 @ 20mV ~ 28V) Other

More information

General Specifications

General Specifications Half-Inch Diameter Process Sealed Rotaries Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications Electrical

More information

CK Series...F3 16mm & 19mm High Security 3A Power Level Solder Lug Bushing Mount

CK Series...F3 16mm & 19mm High Security 3A Power Level Solder Lug Bushing Mount Contents Keylocks Toggles A Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers CK Series... 6mm & 9mm High Security A Power Level

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Top or side actuation permits fl exible board design. Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively

More information

General Specifications

General Specifications Series GT Process Sealed Ultra-Miniature SMT Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical

More information

General Specifications

General Specifications Miniature Rockers Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical Capacity (Resistive Load) Power Level (silver): Logic Level (gold):

More information

General Specifications

General Specifications Series BB Process Sealed Subminiature Antistatic Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA maximum @ 8V A/D maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V)

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Ultra-miniature size allows high density mounting, and extremely light weight of 0. gram makes these switches ideal for handheld equipment. Totally sealed body construction

More information

General Specifications

General Specifications Series NP01 Subminiature Smooth ctuation Pushbuttons General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4V maximum @ 28V C/C maximum (pplicable Range 0.1m ~ 0.1 @ 20mV ~ 28V) Other

More information

Standard Size Rotaries Series HS TS PS

Standard Size Rotaries Series HS TS PS Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical

More information

GENERAL SPECIFICATIONS FOR S1 ~ S29

GENERAL SPECIFICATIONS FOR S1 ~ S29 Medium Capacity Standard Size GENERL SPECIFICTIONS FOR S ~ S9 (Resistive & Inductive Load) Power Level: Shown in the following tables 800--087 Fax: 78-7-70 Other Ratings Contact Resistance: Insulation

More information

Standard Size Rotaries Series HS TS PS

Standard Size Rotaries Series HS TS PS Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical

More information

Switches Unlimited Contact: Fax: GENERAL SPECIFICATIONS

Switches Unlimited Contact: Fax: GENERAL SPECIFICATIONS Series HS TS PS 00--0 Fax: --0 Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Indexing: Contact Timing:

More information

Standard Size Rotaries Series HS TS PS

Standard Size Rotaries Series HS TS PS Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical

More information

Distinctive Characteristics

Distinctive Characteristics Ultra-Miniature SMT Slides Series SS3 Distinctive Characteristics Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively indicates circuit

More information

Distinctive Characteristics

Distinctive Characteristics Tilt Switch Series DS Distinctive Characteristics DSA Environmentally friendly, contains no mercury. High contact reliability due to sealed body. The switch is triggered when tilted beyond ±10 of the horizontal.

More information

Distinctive Characteristics

Distinctive Characteristics istinctive haracteristics Low profile body of MRF model accommodates space limitations required for P mounting. For the MR and MRK bushing mount models, the range of behind panel body depths is. to. (.mm

More information

Process Sealed Rotaries

Process Sealed Rotaries New Product N-0 NR0 Series Process Sealed Rotaries Subminiature Rotaries with Positive, Distinctive Detent 07-07-7 Series NR0 Subminiature Process Sealed Rotaries General Specifications Electrical apacity

More information

Medium Capacity Standard Size Toggles Series S

Medium Capacity Standard Size Toggles Series S GENERAL SPECIFICATIONS FOR S ~ S9 (Resistive & Inductive Load) Power Level: Shown in the following tables Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life:

More information

General Specifications

General Specifications eries J0 & J0 Ultra-Miniature lide & Piano DIP General pecifications Electrical Capacity (Resistive Load) witching Rating: ma @ V DC Nonswitching Rating: 0.A @ 0V DC Other Ratings Contact Resistance: Insulation

More information

日本轻触开关 jf- 带灯轻触开关 - 轻触开关规格贴片轻触开关英文说明书 pdf 防水轻触开关 x 无声轻触开关 x 带灯轻触开 Tactiles Contents S eries... mm Process Sealed m or m Low/Logic Level Straight or Ri

日本轻触开关 jf- 带灯轻触开关 - 轻触开关规格贴片轻触开关英文说明书 pdf 防水轻触开关 x 无声轻触开关 x 带灯轻触开 Tactiles Contents S eries... mm Process Sealed m or m Low/Logic Level Straight or Ri Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 日本轻触开关 jf- 带灯轻触开关 - 轻触开关规格贴片轻触开关英文说明书 pdf 防水轻触开关 x 无声轻触开关 x 带灯轻触开 Contents

More information

0.4VA Logic Level Straight, Right Angle & Vertical PC. Extended & Piano Actuated DIP Slides 24V DC Straight PC

0.4VA Logic Level Straight, Right Angle & Vertical PC. Extended & Piano Actuated DIP Slides 24V DC Straight PC Contents Slides AS Series... 0.VA Logic Level Straight, Right Angle & Vertical PC CS Series... 0 A Power Level Straight PC PCB Mount FS Series... igh Frequency 90Mz to Gz Straight PC JS0, JS0 Series...

More information

Series Single and double-pole rocker switches

Series Single and double-pole rocker switches H Series 1800 - Single and double-pole rocker switches Rocker switches Product features 100 million times proven switching principle High, flexible design variety Excellent actuating characteristic Illuminated

More information

D2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -

D2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- - Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water

More information

V-Series. Contura Rotary Switch

V-Series. Contura Rotary Switch V-Series Contura Rotary Switch The V-Series Contura Rotary Switch was designed for maximum performance and reliability leveraging the features of the widely popular V-series Contura Rocker Switches. Available

More information

Actuator Terminal Model

Actuator Terminal Model Sealed Snap ction Switch D2VW Watertight Miniature Snap ction Switch High-quality watertight, high-precision miniature Snap ction switch. Switch Body meets IP67 requirements Use of epoxy resin assures

More information

Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers

Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Miniature Hydraulic/Magnetic Circuit Breaker M-Series M-Series PDF elibrary The M-Series miniature hydraulic/magnetic circuit breakers

More information

AZ420 MINIATURE GENERAL PURPOSE RELAY

AZ420 MINIATURE GENERAL PURPOSE RELAY MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 100 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available

More information

Ordering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121

Ordering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121 Snap ction Switch V General Purpose Snap ction Switch Industry standard design with switching currents of 10 to 21 Widely used for applications where long life expectancy and high reliability is required.

More information

SERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY. B1 Ultra Small 2A 100,000 N/A SPST, SPDT

SERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY. B1 Ultra Small 2A 100,000 N/A SPST, SPDT SWITCH SELECTION GUIDE Basic Switches SERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY (Resistive) B1 Ultra Small 2A 100,000 N/A SPST, SPDT B1-5 Levers 2A 1,000,000 N/A SPST, SPDT B2 Subminiature

More information

General Specifications

General Specifications Series ND mm Process Sealed SMT DIP otaries eneral Specifications Electrical apacity (esistive Load) Switching ating: ma @ 5V D Nonswitching ating: ma @ 5V D Other atings ontact esistance: Insulation esistance:

More information

Specifications. Description TABLE OF CONTENTS. Page. Description 2. Specifications 2 3. Additional Options 3. How to Order 4 5

Specifications. Description TABLE OF CONTENTS. Page. Description 2. Specifications 2 3. Additional Options 3. How to Order 4 5 TABLE OF CTENTS Page Description Specifications Additional Options How to Order Circuit Descriptions Dimensions 0 Icons into the body of the switch; mounting hardware or special tools are not necessary.

More information

Series Single and double-pole rocker switches

Series Single and double-pole rocker switches Series 10 - Single and double-pole rocker switches to 1 (4) A 0 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches

More information

3 Series Thumbwheel Switches

3 Series Thumbwheel Switches Features/Benefits Most complete product offering in the industry Spacers available to fit most panel cutouts Front or rear mounting options Illuminated models available Typical Applications Test & measurement

More information

Only 19.8mm depth behind panel with built-in resistor

Only 19.8mm depth behind panel with built-in resistor Miniature Lighted Pushbutton Switch R Only 19.8mm depth behind panel with built-in resistor Built-in Resistor LED illumination makes free from wiring resistor. FEATURES Depth behind panel : Only 19.8mm

More information

Mini-Universal MATE-N-LOK Connectors

Mini-Universal MATE-N-LOK Connectors MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used

More information

rocker switches rocker switches diagrams Series with Pilot Lights, 25A One Pilot Light Off-On SPST, independent Off-On SPST, dependent

rocker switches rocker switches diagrams Series with Pilot Lights, 25A One Pilot Light Off-On SPST, independent Off-On SPST, dependent WETHER-RESISTNT SWITCHES STNDRD SERIES, PSTIC EZE STNDRD SERIES, MET EZE NRROW ODY SWITCHES RCKET-MOUNTING SWITCHES DU SWITCHES CCESSORIES 7 WIRING DIGRMS 8 WETHER-RESISTNT ROCKER SWITCHES Switches for

More information

Quick-connect terminals (#110)

Quick-connect terminals (#110) Sealed Subminiature Basic Switch D2SW-P Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealed to IEC IP67. Switch rating of 2 at 250 VC possible with a single-leaf

More information

SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES

SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES SERIES 10 - SINGLE AND DOUBLE-POLE ROCKER SWITCHES TO 1 (4) A 0 V AC ROCKER SWITCHES PRODUCT FEATURES Inrush currents (capacitive) up to 0 A Two housing variants (with fl ange or lower lying) With mechanical

More information

Electrical Components Catalog Universal MATE-N-LOK Connector System

Electrical Components Catalog Universal MATE-N-LOK Connector System Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation

More information

D2SW-3L1HS D2SW-01L1HS

D2SW-3L1HS D2SW-01L1HS Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures

More information

Contact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect

Contact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect VX Miniature Snap Action Switch Compact snap action switch with low force operation Internal mechanism assures outstanding contact reliability Models available for micro load up through 5 Amps ROHS Compliant

More information

Contact form. Operating Force. Plunger SPDT 204g Dust- Proof (in closed position) Plunger SPST-NC 204g Dust- Proof (in closed position)

Contact form. Operating Force. Plunger SPDT 204g Dust- Proof (in closed position) Plunger SPST-NC 204g Dust- Proof (in closed position) D3D Miniature Door Switch Appliance industry standard plunger and lever actuator styles High contact reliability ensured using gold alloy crossbar contacts Drip/spill sealing in free position (plunger

More information

(MR) Miniature Rectangular Connectors (Continued)

(MR) Miniature Rectangular Connectors (Continued) Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug

More information

Pin plunger D2JW-011 D2JW-011-MD. Short hinge lever D2JW-01K1A1 D2JW-01K1A1-MD. Hinge lever D2JW-01K11 D2JW-01K11-MD

Pin plunger D2JW-011 D2JW-011-MD. Short hinge lever D2JW-01K1A1 D2JW-01K1A1-MD. Hinge lever D2JW-01K11 D2JW-01K11-MD Sealed Snap ction Switch DJW Immersion-Proof Subminiature Snap ction Switch Ultra-small and highly sealed Water-tight housing conforming to IEC IP67 Wide range of operating temperature from -40 to 85 C

More information

Custom-Designed Switches,

Custom-Designed Switches, Custom-Designed Switches, Connectors and Assemblies NEW PRODUCT BULLETIN Mil Spec Connectors Full line of high density rectangular connectors QPL Approved to MIL-DTL-83503, MIL-DTL-24308 and MIL-DTL-28804

More information

SEALED, ILLUMINATED ROCKER SWITCHES

SEALED, ILLUMINATED ROCKER SWITCHES K1/K2 The K series rockers are rugged, high performance sealed switches designed for use under severe conditions found in marine, appliance, heavy equipment and industrial control applications. They are

More information

SEALED, ILLUMINATED ROCKER SWITCHES

SEALED, ILLUMINATED ROCKER SWITCHES K1/K2 LOW COST, ROCKER FOR WET AND DUSTY ENVIRONMENTS; 1 AND 2 POLES The K series rockers are rugged, high performance sealed switches designed for use under severe conditions found in marine, appliance,

More information

Mini-Universal MATE-N-LOK 2 Connectors

Mini-Universal MATE-N-LOK 2 Connectors MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide

More information

Commercial MATE-N-LOK Connectors

Commercial MATE-N-LOK Connectors MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe

More information

Distributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings

More information

Push Button Switches. Switches 163. Miniature, round and rectangular push button switches available

Push Button Switches. Switches 163. Miniature, round and rectangular push button switches available Push utton Switches ulgin s broad line of pushbutton switches are available in various sizes and configurations. This includes a variety of illumination and terminal options as well as several with high

More information

Devices raised mounting

Devices raised mounting Devices raised mounting Illuminated actuator pushbutton Front protection Switching system Ø 29 mm Contacts Typ-Nr. e Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.36 1 4 17 12.15 M UT 14-436.36

More information

ILLUMINATED PUSHBUTTON SWITCH

ILLUMINATED PUSHBUTTON SWITCH Jay-El P/N 10888 JAY-EL 10888 JAY-EL P/N 10888 ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-2288 Catalog No. 081 11-03 GOLD CONTACTS Sea Level and 0,000 Feet JAY-EL 10888 ENGINEERING SPECIFICATIONS

More information

JAY-EL JAY-EL P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885

JAY-EL JAY-EL P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885 Jay-El P/N JAY-EL JAY-EL P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S- Catalog No. - For more information, contact our sales team at.. or hmisales@ducommun.com GOLD CONTACTS Sea Level

More information

Push Button Switches. 186 Switches. Miniature, round and rectangular push button switches available

Push Button Switches. 186 Switches. Miniature, round and rectangular push button switches available Push utton Switches ulgin s broad line of pushbutton switches are available in various sizes and configurations. This includes a variety of illumination and terminal options as well as several with high

More information

Sealed Rocker Switches V-Series: Contura IV & V

Sealed Rocker Switches V-Series: Contura IV & V Sealed Rocker Switches V-Series: Contura IV & V The V-Series Contura IV & V snap-in rocker switches offer countless unique options including choices for ratings, circuits, colors, illuminations and symbols.

More information

Oiltight Switches & Pilot Devices

Oiltight Switches & Pilot Devices LED and Incandescent ilot Lights (Sub-Assembled) Removable Terminal* + Operator + Lamp + Lens = Completed Unit * Removable terminals are applicable for CB terminated types only. art Numbers: ilot Light

More information

KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 Amp 150VDC Load Switching KUMP 15 Amp 277VAC

KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 Amp 150VDC Load Switching KUMP 15 Amp 277VAC P& KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 mp 150VDC Load Switching KUMP 15 mp 2VC File E2255 File LR1534 0435 Registration 12 (KUIP) 0435

More information

Sealed Rocker Switches. V-Series: Contura X, XI & XII

Sealed Rocker Switches. V-Series: Contura X, XI & XII Sealed Rocker Switches V-Series: Contura X, XI & XII The V-Series Contura X, XI & XII snap-in rocker/paddle switches offer countless unique options including choices for ratings, circuits, colors, illuminations

More information

Introduction to High Current Card Edge Connectors

Introduction to High Current Card Edge Connectors Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled

More information

16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever

16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,

More information

PUSHWHEEL SWITCHES SEE PUSHWHEEL SWITCH SELECTION GUIDE ON NEXT PAGE

PUSHWHEEL SWITCHES SEE PUSHWHEEL SWITCH SELECTION GUIDE ON NEXT PAGE PUSHWHEEL SWITCHES SEE PUSHWHEEL SWITCH SELECTION GUIDE ON NEXT PAGE 1 PUSHWHEEL SWITCHES PUSHWHEEL SWITCH SELECTION GUIDE: This section contains an extensive variety of pushwheel switches with numerous

More information

Mini-Universal MATE-N-LOK Connectors

Mini-Universal MATE-N-LOK Connectors MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used

More information

Pushbutton Switches, 16mm, Illuminated

Pushbutton Switches, 16mm, Illuminated Pushbutton Switches, 16mm, lluminated lluminated Pushbuttons are instrument-grade switches having snap-acting double break contacts, silver clad and gold plated to satisfy the requirements of logic level

More information

UB Indicators UB. Red, Bright LED. Silver, Straight PC Terminals. Part Numbers for Alternating Legends

UB Indicators UB. Red, Bright LED. Silver, Straight PC Terminals. Part Numbers for Alternating Legends UB ounting Types PCB ounting 01 Square 03 Rectangular * Snap-in ounting 04 Square 06 Rectangular Rectangular with 06B Side Barriers * Standard with Solder Lug terminals K Housing Black Terminals W01 Silver

More information

Mini-Universal MATE-N-LOK Connectors

Mini-Universal MATE-N-LOK Connectors MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used

More information

Switches & Pilot Devices

Switches & Pilot Devices Key features: 21/64 (8mm) round mounting hole Compact Design Saves Space Bright and Vivid Illumination Choice of Shapes and Functions old Clad Silver Contacts for reliable low level switching Snap action

More information

Series 47A: Miniature Rocker and Paddle

Series 47A: Miniature Rocker and Paddle Series 47A: Miniature Rocker and Paddle SERIES 47A Miniature Rocker and Paddle Switches FEATURES Save Space and Weight,, PDT and 4PDT Circuitry Choice of Actuators and Terminations UL Recoginized S in

More information

KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 Amp 150VDC Load Switching KUMP 15 Amp 277VAC

KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 Amp 150VDC Load Switching KUMP 15 Amp 277VAC KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 mp 150VDC Load Switching KUMP 15 mp 2VC File E2255 File LR1534 0435 Registration 12 (KUIP) 0435

More information

Series 47A: Miniature Rocker and Paddle Switches

Series 47A: Miniature Rocker and Paddle Switches SERIES 7A Miniature and Paddle Switches FEATURES Save Space and Weight,, PDT and PDT Circuitry Choice of Actuators and Terminations UL Recoginized DIP Switches S In inches (and millimeters) SP SP SP SP

More information

Terminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB

Terminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept Insert molded base and improved case-to-base seal provides enhanced resistance to

More information