FTP-629USL010/011 FTP-629USL011* Overview

Size: px

Start display at page:

Download "FTP-629USL010/011 FTP-629USL011* Overview"

Harry Todd
5 years ago
Views:

24V driven receipt, ticket printer 2 KIOSK printer unit FTP-629USL010/011 Overview The FTP-629USL Series is 24V driven receipt printer unit with cutter for 2 inch wide paper.

1 24V driven receipt, ticket printer 2 KIOSK printer unit FTP-629USL010/011 Overview The FTP-629USL Series is 24V driven receipt printer unit with cutter for 2 inch wide paper. The unit has our high-speed FTP-629MCL mechanism, cutter and control board, with an integrated paper feed and built-in paper guide section. The receipt printer unit is most suitable for applications such as POS, ATM, and receipt and ticket issuing printers for various other equipment. features Medium duty unit (mounting is easy) High speed printer (200mm / sec.) Auto cutter included Paper near end-detection function Up to 3.25 inch paper diameter Low power consumption Printer double tilt function Prints 2-D barcodes DESIGNATION Printer module interface Cables USB (Ver. 1.1) Serial (RS-232C) USB Interface Serial Interface Part Number FTP-629USL010* FTP-629USL011* FTP-629Y301 FTP-629Y302 Power for logic, head, motor FTP-629Y60 1 *: Interface board is FTP-629DSL100 series

2 specifications Specifications Part number Printing method Dot structure Dot pitch (Horizontal) Dot pitch (Vertical) FTP-629USL010/011 Thermal-sensitive line dot method 432 dots/line mm (8 dots/mm) Dot density mm (8 dots/mm) Line feed pitch Effective printing area 54 mm Paper width 58-1 mm Paper thickness 60 to 150 µm +0 Paper print length Cutting type Number of columns Maximum printing speed 50 to 250mm Full or partial 36 columns/line (12 24 dot font) 600 dotlines/s (200 mm/s) Page mode Low speed mode 40mm/sec Middle speed mode High speed mode Ultra high speed mode 80mm/sec. 125 mm/sec. 200 mm/sec. Character types Character composition, dimensions (H W), Number of characters Interface Alphanumeric KANA: 159 International characters : 195 JIS KANJI (FTP-622DSL107, DSL112): approximately dots, ( mm), 48 columns dots, ( mm), 24 columns 6 8 dots, ( mm), 72 columns 6 16 dots, ( mm), 36 columns Serial RS232C, USB Power supply Dimensions For head For print motor For conveyance motor For cutter For logic 24VDC ± 5%, Voltage Current : average *1 ( ): Peak TBA (2.04) A (at 200 mm/s printing speed, 12.5% printing ratio) TBA (1.03) A (at 80 mm/s printing speed, 12.5% printing ratio) TBA (0.51) A (at 40 mm/s printing speed, 12.5% printing ratio) 24VDC ± 5%, 1.0 A maximum 24VDC ± 5%, 1.0 A maximum 24VDC ± 5%, 1.2 A maximum 5VDC ± 5%, 0.2 A maximum 9.5(W) 170.5(D) 104(H) mm Weight (mechanism, cutter, board, frame) Approximately 1.1 kg (Continued) 2

3 (Continued) Expected life Mechanism Cutter Specifications Pulse durability : 100 million pulse/dot (using Fujitsu's standard driving method) Wear resistance: 100 km (at 12.5% printing ratio) 500,000 cuts Environmental conditions Operating temperature Operating humidity Storage temperature Storage humidity Head temperature 0 C to +50 C 20 to 85% RH (no condensation) 20 C to +65 C (excluding paper) 5 to 95% RH (no condensation) By thermistor (applied energy control, abnormal temperature detection) Detection Paper out/mark detect By photointerrupter Platen open Near end paper Recommended thermal sensitive paper By microswitch By mechanical switch For front insertion use (80 mm width) : FTP-030P0701/P0102 Recommended papers Oji Paper : PD150R,PD160R-N,PD170R NIPPON Paper : TF50KS-E,TF60KS-E, TF50KS-E4 MITSUBISHI Paper Mills : P220VBB-1,AFP-233 Paper diameter Standard Extended (attachment) 83mm 20mm *1: 24VDC, minimum head resistance. FUNCTIONS 1. T est print function 9. Internal RAM abnormality detection 2. P aper feed 10. Cutter abnormality detection 3. P aper out detection 11. Mark detection 4. P aper near end detection 12. MCU operation abnormality detection 5. P laten open detection 13. Motor power saving 6. T hermal head temperature abnormality detection 14. Power supply disconnection protection 7. M otor temperature detection 15. Motor protection 8. V oltage abnormality detection 16. Thermal head protection INTERFACE, COMMAND, OPTIONS Please refer to the FTP-629DSL100 series. Interface command options, please see FTP-609 datasheet. 3

4 dimensions Integrated unit Note: 1. Nominal value 2. Distance from paper roll to enclosure must be 20mm for loading. 3. Basic reference line. 4

5 COMMANDS Command Contents HT LF FF ESC FF ESC EM+n ECS RS ESC US ESC SP+n ESC! + n ESC $+n1+n2 ESC % + n ESC & +y+c1+c2+x+d1to dn ESC *+m+n1+n2+d1+dn ESC _ +n ESC 2 ESC 3+n ESC? + n ESC A+n ESC C+n ESC D+d1+dN +NUL ESC E+n ESC G+n ESC J+n ESC K+n ESC L+n ESC Q+n+!+j ESC R+n ESC S+n ESC T+n ESC V+n Moves print position to the next tab. Line feed. Feeds forms (new page). Data printing in page printing mode. Setting the amount of the feeding at automatic paper feed. Sets reverse printing. Resets reverse printing. Character spacing setting. Sets print mode. Absolute position spacing. External registration character specification/cancellation. External registration character definition. Sets bit image mode. Undeline setting. Sets 1/6 inch line feed length. Sets the line feed length. External registration character deletion. Printer initialization. Sets the space between the line. Sets the page length by character line. Sets the tab position. Highlighted printing specification/cancellation. Double printing specification/cancellation. Feeds paper in forward direction and prints. Reverse paper feed. Page printing mode selection. Frame overlay function. Selects international character. Line printing mode. Print direction setting (only page mode). Right Rotation 90 specification / cancellation. 5

6 Commands continued Command ESC W+X1+X2+1+Y2+dX1+dX2+dX1+dY2 ESC X+m+n ESC Y+01h+ESC+x+a+m+d~ ESC Y+01h+ESC+x+a+m+d~ ESC\+n1+n2 ESC a+n ESC c+1+n ESC c+4+n ESC c+5+n ESC d+n ESC e+n ESC i ESC m ECS s+n ECS t+n ESC u+n ESC v ESC {+n FS!+n FS & FS_+n FS *+ m+n1+n2+d1 to dn FS. FS 2+c1+c2+d1 to dn FS 9+n FS C+n FS E+n FS S+n+n1+n2 FS W+n FS r+n* 1 GS! + n Contents Page printing mode printing area setting. Setting the turning time of the motor excitation. Program download. Printer test. Relative position setting. Positional alignment. Sets internal processing. Paper-out detector selection. Panel switch enable/disable setting. Printing and n-line feeding. Prints and reverse feeds n-lines. Full cut Partial cut Sets printing speed. Character code table selection. Status of peripherals. The status of the paper sensor is notified. Sets/resets upside down printing. Kanji printing mode collective specification. Kanji printing mode specification. Kanji underline specification/cancellation. High speed collective image printing specified. Kanji printing mode cancellation. External character definition. Sets the detection functions. Kanji code system selection. Correction of impressed energy. Kanji spacing setting. Kanji double height adn width printing specification/cancellation. Parameter transmission. Character size specification. 6

7 Commands continued Command GS $ + n1 + n2 GS & +m + x + y1 + y2 + d1 to dn GS' + m + n GS *+x+y+d1 to dx*y*8 GS/ +m GS : GS < GS A+m+n GS B+m GS E+n GS H+n GS I+n+m GS L+n1+n2 GS R+n GS W + n1 + n2 GS\ +n1 + n2 GSˆ + r + t + m G a+n GS e+n+m GS f + n GS h+n Contents Vertical absolute position specification in page printing mode. Registered bit image definition. Registered bit image printing. Registered bit image definition. Registered bit image printing. Macro definition start/end. Line feeds to the next mark. Sets the line feed length after mark detection. Angle setting of bar code. Sets print quality. HRI character printing position selection. Printer ID registration Left margin position setting. Printer ID demand. Printing area width setting. Vertical relative position specification in page printing mode (vertical direction of characters). Mark detection execution. Automatic notification setting status. Sets bar code width. HRI character font selection. Sets bar code height. y) GS k+m +d1to dk + NUL Bar code printing. x) GS k+m+n+ d1 to dn GS k+m+k1+k2+k3+k4+{[p1][d(1,1)] ~ [d(1,i)} ~ {[pi][d(i,1)]~[d(i,j)} [00]16 Print of 2Dcode (QR). GS k+m+k1+k2+k3+k4+k5+d1~dn Print of 2 Dcode (maxi). GS k+m+k1+k2+k3+k4+k5+k6+d1~dn GS v GS w+n Print of 2 Dcode (PDF417). Notification of firmware version. Sets bar code length. * 1 : These commands are valid with FTP-629DSL100 series. 7

8 Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo , Japan Tel: (81-3) Fax: (81-3) Web: North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA U.S.A. Tel: (1-408) Fax: (1-408) Web: Europe Fujitsu Components Europe B.V. Diamantlaan WV Hoofddorp Netherlands Tel: (31-23) Fax: (31-23) Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore Tel: (65) Fax: (65) Web: Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. April 15,

DISCONTINUED FTP-632UCL531 / USL530 DESIGNATION

DISCONTINUED FTP-632UCL531 / USL530 DESIGNATION 24V driven receipt printer unit 3 printer unit FTP-632UCL531 / USL530 Overview The FTP-632 UCL/USL Series is 24V driven receipt printer unit with cutter for 3 inch wide paper. The unit has our high-speed