CONTROL MICROSYSTEMS and 5402 Digital I/O Module. Hardware Manual

Size: px
Start display at page:

Download "CONTROL MICROSYSTEMS and 5402 Digital I/O Module. Hardware Manual"

Transcription

1 50 and 50 Digital I/O Module Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance Steacie Drive Telephone: Kanata, Ontario Facsimile: KK A9 Technical Support: Canada -CONTROL

2 50 and 50 Digital I/O Module Hardware Manual Control Microsystems Inc. All rights reserved. Printed in Canada. Trademarks TeleSAFE, TelePACE, SmartWIRE, SCADAPack, TeleSAFE Micro6 and TeleBUS are registered trademarks of Control Microsystems Inc. All other product names are copyright and registered trademarks or trade names of their respective owners. Material used in the User and Reference manual section titled SCADAServer OLE Automation Reference is distributed under license from the OPC Foundation. 50/50 Digital I/O Module Hardware Manual October 9, 007

3 Table of Contents OVERVIEW... 3 IMPORTANT SAFETY INFORMATION... 3 INSTALLATION I/O Module Installation I/O Module Installation Field Wiring AC Modules DC Modules Termination Connector Selection Selection Selection... OPERATION AND MAINTENANCE LED Indicators Troubleshooting SPECIFICATIONS Module Specifications Module Specifications I/O Module Specifications APPROVALS AND CERTIFICATIONS... 5 Index of Figures Figure : 50 Digital I/O Module... 5 Figure : 50 Digital I/O Module... 6 Figure 3: Field Wiring Examples... 7 Figure : Model 50 Digital I/O Module Switches... 9 Figure 5: Model 50 Digital I/O Module Switches /50 Digital I/O Module Hardware Manual October 9, 007

4 Overview The Model 50 Digital Input/Output module adds eight, plug-in I/O modules to a 5000 Series input/output system. Up to eight Model 50 modules may be installed on the 5000 Series I/O bus, for a total of 6 discrete inputs and 6 discrete outputs. Input and output I/O modules can mixed in any combination. The Model 50 Digital Input/Output module adds sixteen, plug-in I/O modules to a 5000 Series input/output system. Up to sixteen Model 50 modules may be installed on the 5000 Series I/O bus, for a total of 56 discrete inputs and 56 discrete outputs. Each 50 module must be all inputs or all outputs. 50 input and output modules can mixed in any combination. The 50 module is highly cost effective for applications with fewer than eight discrete I/O points. Both the 50 and 50 modules are useful for high power discrete output applications. These plug in I/O modules have higher current carrying capacity than either the 5000 Series triac or FET output modules. The I/O modules plug into sockets, to facilitate field replacement and point configuration. Each I/O point is individually isolated, and has two poles on the field wiring terminal block. A large selection of I/O signal ranges is available. A light emitting diode (LED) shows the status of each I/O point. The LEDs are controlled directly by the I/O module. The SmartWIRE, SCADAPack or TeleSAFE Micro6 controller addresses the 50 module as both a digital input module and a digital output module. Therefore the 50 module consumes one input and one output address. The 50 module is addressed either as an input or an output module. It consumes one input or one output address (but not both). 50/50 Digital I/O Module Hardware Manual October 9, 007 3

5 Important Safety Information Power, input and output (i/o) wiring must be in accordance with Class I, Division wiring methods Article 50- (b) of the National Electrical Code, NFPA 70 for installations in the U.S., or as specified in Section -J of the Canadian Electrical Code for installations within Canada and in accordance with the authority having jurisdiction. WARNING! EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS, DIVISION. WARNING! EXPLOSION HAZARD WHEN IN HAZARDOUS LOCATIONS, TURN OFF POWER BEFORE REPLACING OR WIRING MODULES. WARNING! EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NONHAZARDOUS. 50/50 Digital I/O Module Hardware Manual October 9, 007

6 3 Installation The installation of the 50 and 50 Digital Input/Output modules requires mounting the modules on the 7.5mm by 35mm DIN rail and connecting the modules to the system I/O Bus. Refer to the System Configuration Guide, at the beginning of this manual, for complete information on system layout, I/O Bus cable routing and module installation I/O Module Installation The 50 modules support input and output solid-state I/O modules. An input or output module may be installed at any I/O point. There are positions on the 50 for I/O modules. They are labeled IO0 to IO7 (see Figure : 50 Digital I/O Module). A dip-switch configures each point as an input or output. They are numbered 0 to 7 on the circuit board, corresponding to sockets IO0.0 to IO0.7 and IO.0 to IO.7. Ignore the numbers printed on the dip-switch case. To select an input point, press down on the INPUT (left) side of the switch. To select an output point, press down on the OUTPUT (right) side of the switch. To install an I/O module: Remove the module cover. Insert the I/O module into the sockets on the board. Press the module firmly into the sockets. Set the I/O type switch corresponding to the I/O module. Set the switch to INPUT if the I/O point is an input. Set the switch to OUTPUT if the I/O point is an output. Replace the cover. It holds the I/O modules in place. Switches I/O Bus Connector Status LEDs I/O Type Switches I/O Bus Connector I/O Module Sockets Termination Connector Figure : 50 Digital I/O Module 50/50 Digital I/O Module Hardware Manual October 9, 007 5

7 3. 50 I/O Module Installation The 50 modules support input and output solid state I/O modules. There are 6 positions on the 50 for I/O modules. They are labeled IO0 to IO5 (see Figure : 50 Digital I/O Module). 6 input modules or 6 output modules may be installed. Input and output modules cannot be mixed on the same 50 module. The OUTPUTS dip-switch configures the 50 for input or output modules. To use the 50 with output modules, close the OUTPUTS switch. To use the 50 with input modules, open the OUTPUTS switch. To install an I/O module: Remove the module cover. Insert the I/O module into the sockets on the board. Press the module firmly into the sockets. Replace the cover. It holds the I/O modules in place. I/O Bus Connector Status LEDs Configuration Switches I/O Bus Connector 0 Termination Connector I/O Module Sockets Termination Connector Figure : 50 Digital I/O Module 3.3 Field Wiring Field wiring connects to the termination connectors at the bottom of the module (see Figure : 50 Digital I/O Module and Figure : 50 Digital I/O Module). Each I/O point has two poles. On the 50 module the pairs are numbered 0 to 7 corresponding to I/O module sockets IO0 to IO7. On the 50 module the pairs are numbered 0 to 5 corresponding to I/O module sockets IO0 to IO5. The + and symbols indicate the polarity of the poles. All I/O points are isolated from each other. Isolation between I/O points allows multiple power sources to be used within in the same module. Figure 3: Field Wiring Examples shows typical wiring for AC and DC inputs and outputs. 50/50 Digital I/O Module Hardware Manual October 9, 007 6

8 3.3. AC Modules Loads can be connected to the Hot or Neutral side of the power source. They are shown connected to the neutral side in Figure 3: Field Wiring Examples. You may ignore the signal polarity labels on the terminal block when wiring AC input and output modules DC Modules Observe the signal polarity when wiring DC input and output modules. Digital output modules should be fused, particularly in primary voltage carrying modules. See Figure 3: Field Wiring Examples for fusing examples. Consult the individual I/O module specifications for the suggested ratings for external fuses. IDCM-5 ODCM-5 IACM-5 OACM-5 DC INPUT DC OUTPUT AC INPUT AC OUTPUT F U S E 5 Amp maximum current F U S E 5 Amp maximum current L O A D L O A D + FUSE Volts FUSE HOT 0VAC Neutral NOTES: These are typical wiring examples. Only four I/O points are shown. Choose individual fuses or line fuses. Both types are shown. Figure 3: Field Wiring Examples Termination Connector Controller, modem and I/O modules use screw termination style connectors for termination of field wiring. They accommodate solid or stranded wires from to AWG. The connectors are removable. This allows module replacement without disturbing the field wiring. Leave enough slack in the wiring for the connector to be removed. CAUTION: To remove the connector: Remove power before servicing unit. Pull the connector upward from the board. Apply even pressure to both ends of the connector. To install the connector: 50/50 Digital I/O Module Hardware Manual October 9, 007 7

9 Line up the pins on the module with the holes in the connector. Make sure all the pins line up properly. Push the connector onto the pins. Apply even pressure to both ends on the connector. The 50 module uses a two piece connector. Positions to are on the first connector. Positions 9 to 6 are on the second connector. The 50 module has an additional two piece connector. Positions 7 to are on the third connector. Positions 5 to 3 are on the fourth connector. Be sure not to confuse the connectors. 3. Selection The 5000 Series I/O bus will support a maximum of forty I/O (input/output) modules Series I/O module types may be combined in any manner to the maximum supported by the controller used. The types of input and output modules available are: Digital Input modules Digital Output modules Analog Input modules Analog Output modules Counter Input modules Each type of I/O module, connected to the I/O bus, must have a unique I/O module address. Different types of I/O modules may have the same module address. The address range supported by the SmartWIRE, SCADAPack or TeleSAFE Micro6 controller module may restrict the I/O module address range. Refer to the controller manual for the maximum address supported Selection The model 50 Digital I/O module acts as both an input and an output module. The three address switches labeled,, and set the input and output module address. To set the address: Open all three switches by pressing down the left side of the switch. Close the switches that total to the desired address. Figure : Model 50 Digital I/O Module Switches shows the switch settings for each of the module addresses. Note: The 50 module uses one digital input address and one digital output address per module. No other digital I/O module (input or output) may use the address set on the 50 module Selection The model 50 Digital I/O module acts as either an input or an output module. If the OUTPUTS switch is closed, the 50 module uses digital output module address. If the OUTPUTS switch is open the 50 module uses digital input module address. The four address switches labeled,, and set the input and output module address. To set the address: 50/50 Digital I/O Module Hardware Manual October 9, 007

10 Open all four switches by pressing down the left side of the switch. Close the switches that total to the desired address. Figure 5: Model 50 Digital I/O Module Switches shows the switch settings for each of the 6 module addresses How to Set Switches Determine the module address. Press the side of the switches shown in gray above. Press this side to ignore switch value Press this side to add switch value Figure : Model 50 Digital I/O Module Switches How to Set Switches Determine the module address. Press the side of the switches shown in gray above. Press this side to ignore switch value Press this side to add switch value Figure 5: Model 50 Digital I/O Module Switches 50/50 Digital I/O Module Hardware Manual October 9, 007 9

11 Operation and Maintenance This 50 and 50 modules require no routine maintenance or calibration. If a module is not functioning correctly, contact Control Microsystems Technical Support for more information and instructions for returning the module for repair.. LED Indicators The models 50 and 50 modules have one red status LED per I/O point. This LED is on when an I/O module is installed and an output is turned on or the input is monitoring a voltage greater than the minimum rated input voltage. The LEDs are always enabled when an I/O module is installed. They are not affected by the LED power signal on the I/O bus.. Troubleshooting Problem Input LED does not come on when input signal is applied. Output LED does not come on when output is turned on. Output LED comes on but output is not energized. Action Check that the I/O module is the correct type. Check that the I/O module is properly seated in the sockets. If this is a DC input, check the polarity of the signal. Check the magnitude of the input voltage. It must be greater than the I/O module turn on voltage. Check that the I/O module is properly seated in the sockets. Check that the I/O module is the correct type. Check the external fuse if one is installed. Check the field wiring. 50/50 Digital I/O Module Hardware Manual October 9, 007 0

12 5 Specifications Disclaimer: Control Microsystems reserves the right to change product specifications without notice. For more information visit Module Specifications I/O points Voltage Range Load Current Surge Current Off-State Leakage Transient Protection Response Time Isolation ing Input/Output Assignment Power Requirements Visual Indicators Field Terminations Dimensions Mounting Packaging Environment 500 VAC DIP switch configurable able up to modules. DIP switch selection for each I/O point 90mA red LEDs permanently enabled Two pole, removable terminal block to AWG 5 amp contacts.5 inch (0 mm) wide.65 inch ( mm) high.75 inch ( mm) deep 7.5 x 35 DIN rail Corrosion resistant zinc plated steel with black enamel paint 5% RH to 95% RH, non-condensing 0 o C to 60 o C 0 o F to 0 o F 50/50 Digital I/O Module Hardware Manual October 9, 007

13 5. 50 Module Specifications I/O points 6 Voltage Range Load Current Surge Current Off-State Leakage Transient Protection Response Time Isolation ing Input/Output Assignment Power Requirements Visual Indicators Field Terminations Dimensions Mounting Packaging Environment 500 VAC DIP switch configurable able up to 6 modules, depending on controller module. All inputs or outputs. Selectable by DIP switch. 50mA 6 red LEDs permanently enabled Four pole, removable terminal block to AWG 5 amp contacts.37 inch (5 mm) wide.65 inch ( mm) high.75 inch ( mm) deep 7.5 x 35 DIN rail corrosion resistant zinc plated steel with black enamel paint 5% RH to 95% RH, non-condensing 0 o C to 60 o C 0 o F to 0 o F 50/50 Digital I/O Module Hardware Manual October 9, 007

14 5.3 I/O Module Specifications The following specifications are for four common I/O modules. Specifications for other modules are available, upon request from Control Microsystems. These specifications apply to I/O modules supplied by Control Microsystems. Specifications for I/O modules from other suppliers may be different. Common Specifications Size 0. width X.7 length X.0 height Isolation 000 V RMS at 60 Hz. Operating temperature Insulation resistance 0C to +0C 0F to +76F 00 M at 500 VDC IACM-5 Type Color Input voltage range Must operate voltage Must release voltage Turn-on/turn-off time AC input Yellow 90-0 VAC/VDC nominally 0 VAC 90 VAC 5 VAC 0 ms maximum IDCM-5 Type Color Input voltage range Must operate voltage Must release voltage Turn-on/turn-off time DC Input White 3-3 VDC 3 VDC VDC 0.0/0.0 ms maximum OACM-5 Type Color Output voltage range Load current Single cycle surge current On-state voltage drop AC Output, zero crossing turn on Black -0 VAC typically 0 VAC Amps at 5C de-rate to. Amps at 70C 0 Amps.5 volts max. 50/50 Digital I/O Module Hardware Manual October 9, 007 3

15 Leakage current Turn-on time Turn-off time Fuse ma maximum / 60 Hz cycle maximum / cycle maximum 5 Amp recommended on output. See Figure 3: Field Wiring Examples for information. ODCM-5 Type Color Output voltage range Load current One second surge current On-state voltage drop Leakage current Turn-on time Turn-off time Fuse DC Output Red 3-60 VDC Amps at 5C de-rate to. Amps at 70C 5 Amps. volts maximum.5ma DC maximum 0.0 ms maximum 0.05 ms maximum 5 Amp recommended on output See Figure 3: Field Wiring Examples for information. 50/50 Digital I/O Module Hardware Manual October 9, 007

16 6 Approvals and Certifications Safety Digital Emissions Non-Incendive Electrical Equipment for Use in Class I, Division Groups A, B, C and D Hazardous Locations. FCC Part 5, Subpart B, Class A Verification 50: EN : EN : 00 Electromagnetic Compatibility Generic Emission Standard Part: Industrial Environment C-Tick compliance. Registration number N57. Immunity 50: EN : EN : 999 Electromagnetic Compatibility Generic Standards Immunity for Industrial Environments Declaration This product conforms to the above Emissions and Immunity Standards and therefore conforms with the requirements of Council Directive 9/336/EEC (as amended) relating to electromagnetic compatibility. Models with digital inputs configured below 30Vdc/60Vac are eligible to bear the CE mark. The Low Voltage Directive is not applicable to this product in applications below 30Vdc/60Vac. 50/50 Digital I/O Module Hardware Manual October 9, 007 5

CONTROL MICROSYSTEMS and 5404 Digital Input Module. Hardware Manual

CONTROL MICROSYSTEMS and 5404 Digital Input Module. Hardware Manual 503 and 50 Digital Input Module Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance Steacie Drive Telephone: 63-59-93 Kanata, Ontario Facsimile: 63-59-0 KK A9 Technical Support: -6-676

More information

CONTROL MICROSYSTEMS and 5407 Relay Output Module. Hardware Manual

CONTROL MICROSYSTEMS and 5407 Relay Output Module. Hardware Manual 506 and 507 Relay Output Module Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance Steacie Drive Telephone: 63-59-93 Kanata, Ontario Facsimile: 63-59-0 KK A9 Technical Support: -6-676

More information

CONTROL MICROSYSTEMS Analog Output Module. Hardware Manual

CONTROL MICROSYSTEMS Analog Output Module. Hardware Manual 5304 Analog Output Module Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance 48 Steacie Drive Telephone: 613-591-1943 Kanata, Ontario Facsimile: 613-591-1022 K2K 2A9 Technical Support:

More information

CONTROL MICROSYSTEMS High Speed Counter Input Module. Hardware Manual

CONTROL MICROSYSTEMS High Speed Counter Input Module. Hardware Manual 50 High Speed Counter Input Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance Steacie Drive Telephone: 63-59-93 Kanata, Ontario Facsimile: 63-59-0 KK A9 Technical Support: -6-676

More information

CONTROL MICROSYSTEMS Analog Input Module. Hardware Manual

CONTROL MICROSYSTEMS Analog Input Module. Hardware Manual 550 Analog Input Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance Steacie Drive Telephone: 63-59-93 Kanata, Ontario Facsimile: 63-59-0 KK A9 Technical Support: -6-676 Canada -CONTROL

More information

5401 and 5402 Digital I/O Modules

5401 and 5402 Digital I/O Modules 50 and 50 Digital I/O Modules Installation, Operation and Maintenance Setup Manual 5/9/0 Safety Information The information provided in this documentation contains general descriptions and/or technical

More information

CONTROL MICROSYSTEMS Differential Analog Input Module. Hardware Manual

CONTROL MICROSYSTEMS Differential Analog Input Module. Hardware Manual 550 Differential Analog Input Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance Steacie Drive Telephone: 63-59-93 Kanata, Ontario Facsimile: 63-59-0 KK A9 Technical Support: -6-676

More information

CONTROL MICROSYSTEMS Toggle Switch Digital Input Module. Hardware Manual

CONTROL MICROSYSTEMS Toggle Switch Digital Input Module. Hardware Manual 5 Toggle Switch Digital Input Module Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance 8 Steacie Drive Telephone: 63-59-93 Kanata, Ontario Facsimile: 63-59-0 KK A9 Technical Support:

More information

CONTROL MICROSYSTEMS Potentiometer Analog Input Module. Hardware Manual

CONTROL MICROSYSTEMS Potentiometer Analog Input Module. Hardware Manual 55 Potentiometer Analog Input Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance Steacie Drive Telephone: 63-59-93 Kanata, Ontario Facsimile: 63-59-0 KK A9 Technical Support: -6-676

More information

CONTROL MICROSYSTEMS Thermocouple Analog Input Module. Hardware Manual

CONTROL MICROSYSTEMS Thermocouple Analog Input Module. Hardware Manual 550 Thermocouple Analog Input Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance Steacie Drive Telephone: 63-59-93 Kanata, Ontario Facsimile: 63-59-0 KK A9 Technical Support: -6-676

More information

CONTROL MICROSYSTEMS SDI-12 Interface Module. Hardware Manual

CONTROL MICROSYSTEMS SDI-12 Interface Module. Hardware Manual 5915 SDI-12 Interface Module Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance 48 Steacie Drive Telephone: 613-591-1943 Kanata, Ontario Facsimile: 613-591-1022 K2K 2A9 Technical Support:

More information

5403 and 5404 Digital Input Modules

5403 and 5404 Digital Input Modules 503 and 50 Digital Input Modules Installation, Operation and Maintenance Setup Manual //07 Copyright 0-07 Schneider Electric Canada Inc. All rights reserved. 503 and 50 Digital Input Modules The information

More information

CONTROL MICROSYSTEMS and 5601A Input/Output (I/O) Module. Hardware Manual

CONTROL MICROSYSTEMS and 5601A Input/Output (I/O) Module. Hardware Manual 5601 and 5601A Input/Output (I/O) Module Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance 48 Steacie Drive Telephone: 613-591-1943 Kanata, Ontario Facsimile: 613-591-1022 K2K 2A9

More information

SCADAPack E 5405 Digital Input Hardware Manual

SCADAPack E 5405 Digital Input Hardware Manual SCADAPack E 5405 Digital Input Hardware Manual 2 SCADAPack E 5405 Digital Input Hardware Manual Table of Contents Part I 5405 Digital Input Module 3 1 Technical... Support 3 2 Safety... Information 4 3

More information

5502 Differential Analog Input Module

5502 Differential Analog Input Module 550 Differential Analog Input Installation, Operation and Maintenance Setup Manual //07 Copyright 0-07 Schneider Electric Canada Inc. All rights reserved. 550 Differential Analog Input The information

More information

CONTROL MICROSYSTEMS. SCADAPack Micro 16. Quick Start Guide

CONTROL MICROSYSTEMS. SCADAPack Micro 16. Quick Start Guide SCADAPack Micro 16 Quick Start Guide CONTROL MICROSYSTEMS SCADA products... for the distance 48 Steacie Drive Telephone: 613-591-1943 Kanata, Ontario Facsimile: 613-591-1022 K2K 2A9 Technical Support:

More information

5504 Thermocouple Analog Input Module

5504 Thermocouple Analog Input Module 550 Thermocouple Analog Input Installation, Operation and Maintenance Setup Manual 5/9/0 Safety Information The information provided in this documentation contains general descriptions and/or technical

More information

CONTROL MICROSYSTEMS Input/Output (I/O) Module. Hardware Manual

CONTROL MICROSYSTEMS Input/Output (I/O) Module. Hardware Manual 5604 Input/Output (I/O) Module Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance 48 Steacie Drive Telephone: 613-591-1943 Kanata, Ontario Facsimile: 613-591-1022 K2K 2A9 Technical

More information

5607 Input/Output (I/O) Module

5607 Input/Output (I/O) Module 5607 Input/Output (I/O) Module Installation, Operation and Maintenance Setup Manual 5/19/2011 Safety Information The information provided in this documentation contains general descriptions and/or technical

More information

SCADAPack E 5505 RTD Input Hardware Manual

SCADAPack E 5505 RTD Input Hardware Manual SCADAPack E 5505 RTD Input Hardware Manual 2 SCADAPack E 5505 RTD Input Hardware Manual Table of Contents Part I 5505 RTD Input Module 3 1 Technical... Support 3 2 Safety... Information 4 3 Overview...

More information

CONTROL MICROSYSTEMS. TeleSAFE Micro16 Controller. Hardware Manual

CONTROL MICROSYSTEMS. TeleSAFE Micro16 Controller. Hardware Manual TeleSAFE Micro16 Controller Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance 48 Steacie Drive Telephone: 613-591-1943 Kanata, Ontario Facsimile: 613-591-1022 K2K 2A9 Technical Support:

More information

5521 Potentiometer Analog Input Module

5521 Potentiometer Analog Input Module 55 Potentiometer Analog Input Installation, Operation and Maintenance Setup Manual 5/9/0 Safety Information The information provided in this documentation contains general descriptions and/or technical

More information

5910 Ethernet Gateway Module

5910 Ethernet Gateway Module Hardware Manual 2/24/2017 Copyright 2014-2017 Schneider Electric Canada Inc. All rights reserved. 5910 Ethernet Gateway Module The information provided in this documentation contains general descriptions

More information

CONTROL MICROSYSTEMS. SCADAPack 100 Controller. Hardware Manual

CONTROL MICROSYSTEMS. SCADAPack 100 Controller. Hardware Manual SCADAPack 100 Controller Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance 48 Steacie Drive Telephone: 613-591-1943 Kanata, Ontario Facsimile: 613-591-1022 K2K 2A9 Technical Support:

More information

SCADAPack E 5607 I/O Hardware Manual

SCADAPack E 5607 I/O Hardware Manual SCADAPack E 5607 I/O Hardware Manual 2 SCADAPack E 5607 I/O Hardware Manual Table of Contents Part I 5607 Input/Output Module 3 1 Technical... Support 3 2 Safety... Information 4 3 Overview... 6 4 Installation...

More information

PM Series Power Meter

PM Series Power Meter PM Series Power Meter Quick Setup Guide - PMC-1000, PMC- 1001, PMM-1000, PMB-1960 Safety Information DANGER! HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Follow safe electrical work practices. See

More information

QUICK SETUP GUIDE PMC-1000, PMC-1001, PMM-1000, PMB PM Series Power Meter. Safety Information. Equipment Maintenance and Service.

QUICK SETUP GUIDE PMC-1000, PMC-1001, PMM-1000, PMB PM Series Power Meter. Safety Information. Equipment Maintenance and Service. PM Series Power Meter QUICK SETUP GUIDE PMC-1000, PMC-1001, PMM-1000, PMB-1960 Safety Information DANGER! HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Follow safe electrical work practices. See NFPA

More information

SCADAPack E I/O Module Hardware Manual (337E Only) Version: Date: August 2017

SCADAPack E I/O Module Hardware Manual (337E Only) Version: Date: August 2017 SCADAPack E 5606 I/O Module Hardware Manual (337E Only) Version: Date: August 2017 Table of Contents 1 Legal...5 Information 2 Technical...6 Support 3 Safety...7 Information 4 Overview...10 5 Installation...11

More information

PACSystems* RX3i and Series IC693MDL940 / IC694MDL940

PACSystems* RX3i and Series IC693MDL940 / IC694MDL940 May 2015 PACSystems* RX3i and Series 90-30 IC693MDL940 / IC694MDL940 Output Module, Relay, NO, 2 Amp, 16 Point The Series 90*-30 and PACSystems * MDL940 2 Amp Relay Output module provides 16 normally-open

More information

60W Power over Ethernet Waterproof Adapter PoE IEEE BT Single Port Injector for Outdoor Application

60W Power over Ethernet Waterproof Adapter PoE IEEE BT Single Port Injector for Outdoor Application WWW.PHIHONG.COM 60W Power over Ethernet Waterproof Adapter PoE IEEE BT Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3bt Standard Non-Vented Case with Mounting Bracket

More information

RSTI-EP Slice I/O. Digital Output Module

RSTI-EP Slice I/O. Digital Output Module GFK-2959B December 2015 RSTI-EP Slice I/O Digital Output Modules EP-2214, EP-2614, EP-2634, EP-2218, EP-225F Relay Output Module Solid-state Relay Output Module EP-2814 Module Status LED Channel Status

More information

TM3DI16 module TM3-16 inputs

TM3DI16 module TM3-16 inputs Characteristics module TM3-16 inputs Main Range of product Product or component type Range compatibility Jun 30, 2018 Modicon TM3 Discrete input module Modicon M241 Modicon M251 Modicon M221 Discrete input

More information

RSTI-EP Slice I/O. PROFINET Scanner EPXPNS001. GFK-2965C November 2017

RSTI-EP Slice I/O. PROFINET Scanner EPXPNS001. GFK-2965C November 2017 November 2017 Ethernet Ports PWR, SF, BF, MT, LINK 1, ACT 1, LINK 2, and ACT 2 LEDs Door for Micro USB Port PROFINET Scanner Power Supply LED RSTI-EP Slice I/O PROFINET Scanner The PROFINET Scanner is

More information

RSTI-EP Slice I/O. EtherCAT Network Adapter Module EPXETC001. GFK-2967B Septembery 2016

RSTI-EP Slice I/O. EtherCAT Network Adapter Module EPXETC001. GFK-2967B Septembery 2016 Septembery 2016 RSTI-EP Slice I/O EtherCAT Network Adapter Module PWR, BF, MT, L/A IN, L/A OUT, RUN, and ERROR LEDs Ethernet Ports Door for Micro USB Port EtherCAT Network Adapter Power Supply LED The

More information

TM3TM3 module TM3-2 temperature inputs and 1 analog output

TM3TM3 module TM3-2 temperature inputs and 1 analog output Characteristics module TM3-2 temperature inputs and 1 analog output Main Range of product Product or component type Range compatibility Analogue input number 2 Analogue input type Analogue output number

More information

TM3AI4 module TM3-4 analog inputs

TM3AI4 module TM3-4 analog inputs Characteristics module TM3-4 analog inputs Main Range of product Product or component type Range compatibility Analogue input number 4 Analogue input type Complementary Analogue input resolution Permissible

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS www.altroniccontrols.com INSTALLATION INSTRUCTIONS EXACTA 21 MONITORING AND CONTROL SYSTEM CAUTION: The EXACTA 21 CONTROL SYSTEM is CSA CERTIFIED FOR use in Class I, GROUPS C & D, Division 2 hazardous

More information

PanelView Plus/VersaView CE Terminals and Display Modules

PanelView Plus/VersaView CE Terminals and Display Modules Installation Instructions PanelView Plus/VersaView CE Terminals and Display Modules (Catalog Numbers 2711P-xxxxxx, 6182H-xxxxxx) English Inside: Overview...2 For More Information...2 Modular Components...3

More information

MCX08M2 Programmable controller

MCX08M2 Programmable controller Data sheet MCX08M2 Programmable controller MCX08M2 is an electronic controller that holds all the typical functionalities of MCX controllers in the compact size of 8 DIN modules: programmability connection

More information

RM17UB3. Product data sheet Characteristics. voltage control relay RM17-U - range V AC. Main. Complementary

RM17UB3. Product data sheet Characteristics. voltage control relay RM17-U - range V AC. Main. Complementary Characteristics voltage control relay RM17-U - range 183..528 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters Time delay

More information

TM3TI8T module TM3-8 inputs temperature

TM3TI8T module TM3-8 inputs temperature Characteristics module TM3-8 inputs temperature Main Range of product Product or component type Range compatibility Analogue input number 8 Analogue input type Complementary Analogue input resolution Input

More information

FP-PS-4. Features. Installation

FP-PS-4. Features. Installation OPERATING INSTRUCTIONS FP-PS-4 FieldPoint Power Supply These operating instructions describe the installation, features, and characteristics of the FP-PS-4. Features The FP-PS-4 is a FieldPoint power supply

More information

Industriefunkuhren. Technical Manual. Signal Converter. for DIN Rail Mounting Series 4800xx-yy ENGLISH

Industriefunkuhren. Technical Manual. Signal Converter. for DIN Rail Mounting Series 4800xx-yy ENGLISH Industriefunkuhren Technical Manual Signal Converter for DIN Rail Mounting Series 4800xx-yy ENGLISH Version: 01.01-19.07.2007 2 / 23 Signal Converter 4800 - V01.01 INPORTANT NOTES Downloading Technical

More information

SCADAPack 530E 535E. remote Programmable Automation Controller

SCADAPack 530E 535E. remote Programmable Automation Controller SCADAPack 530E 535E remote Programmable Automation Controller 1 With the SCADAPack 500E range, Schneider Electric introduces the first ever remote Programmable Automation Controller (rpac). This data sheet

More information

TM3TI4 module TM3-4 inputs temperature

TM3TI4 module TM3-4 inputs temperature Characteristics module TM3-4 inputs temperature Main Range of product Product or component type Range compatibility Analogue input number 4 Analogue input type Complementary Analogue input resolution Permissible

More information

Series AMEL10-MJZ 10 Watt AC-DC / DC-DC Converter

Series AMEL10-MJZ 10 Watt AC-DC / DC-DC Converter Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: Input Voltage (VDC) Max Output wattage (W) Output Voltage (V) Output Current max (A) Maximum

More information

TM5C12D6T6L compact I/O expansion block TM5-24 I/0-12 DI - 6 DO transistor - 4 AI - 2 AO

TM5C12D6T6L compact I/O expansion block TM5-24 I/0-12 DI - 6 DO transistor - 4 AI - 2 AO Characteristics compact I/O expansion block TM5-24 I/0-12 DI - 6 DO transistor - 4 AI - 2 AO Main Range of product Product or component type Complementary Enclosure material Colour Input/Output number

More information

RSTI-EP Slice I/O Digital Input Modules EP-1214, EP-1218, EP-1318, EP-125F, EP-1804 Digital Input Module with Time Stamp EP-12F4

RSTI-EP Slice I/O Digital Input Modules EP-1214, EP-1218, EP-1318, EP-125F, EP-1804 Digital Input Module with Time Stamp EP-12F4 GFK-2975C August 2016 Module Status LED Channel Status LEDs Digital Input Connector Ground 24 V DC FE Digital Input Module RSTI-EP Slice I/O Digital Input Modules EP-1214, EP-1218, EP-1318, EP-125F, EP-1804

More information

RM35UB3. Product data sheet Characteristics. voltage control relay RM35-U - range V AC. Main. Complementary

RM35UB3. Product data sheet Characteristics. voltage control relay RM35-U - range V AC. Main. Complementary Characteristics voltage control relay RM35-U - range 194..528 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters Time delay

More information

SCADAPack 312E 313E. Smart RTUs for water

SCADAPack 312E 313E. Smart RTUs for water SCADAPack 312E 313E Smart RTUs for water 1 SCADAPack 312E and 313E Smart RTUs feature 32-bit processing, serial and US communications, integrated 12-30Vdc power supply, advanced power-management and a

More information

RM17UAS. Product datasheet Characteristics. voltage control relay RM17-U - range V DC. Main. Complementary. Price* : 70.

RM17UAS. Product datasheet Characteristics. voltage control relay RM17-U - range V DC. Main. Complementary. Price* : 70. Characteristics voltage control relay RM17-U - range 9..15 V DC Price* : 70.64 GBP Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters

More information

RM35TF V AC

RM35TF V AC Characteristics multifunction phase control relay RM35-T - range 194..528 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters

More information

78 Series Electromechanical Relay Selection Guide

78 Series Electromechanical Relay Selection Guide 78 Series Electromechanical Relay Selection Guide Specification 781 Series 782 Series 783 Series 784 Series Coil Voltages Configuration SPDT DPDT 3PDT 4PDT Contact Rating 15A 15A 15A 15A Base Socket 5

More information

PHOENIX CONTACT - 07/2006

PHOENIX CONTACT - 07/2006 Buffer module with maintenance-free capacitor-based power storage device INTERFACE Data sheet 102035_03_en PHOENIX CONTACT - 07/2006 Description Short-term mains interruptions are bridged by QUINT BUFFER,

More information

SCADAPack E Input/Output Module Hardware Manual. Version: Date: August 2017

SCADAPack E Input/Output Module Hardware Manual. Version: Date: August 2017 SCADAPack E Version: Date: August 2017 Table of Contents 1 Legal Information...5 2 Technical Support...6 3 Safety Information...7 4 Documentation Check...10 5 About this Manual...11 6 About the 5610 I/O

More information

Rhino Buffer Module PSM24-BFM600S. Operating Instructions

Rhino Buffer Module PSM24-BFM600S. Operating Instructions Rhino Buffer Module PSM24-BFM600S Operating Instructions RHINO BUFFER MODULE PSM24-BFM600S Description The PSM24-BFM600S Buffer Module will hold the output voltage of a 24 VDC power supply after brownouts

More information

INSTRUCTION MANUAL. Universal AC Input Switching Power Supply 24 Vdc Output DIN-Rail Models PSD1000, PSD1000F PSD PSD1000F

INSTRUCTION MANUAL. Universal AC Input Switching Power Supply 24 Vdc Output DIN-Rail Models PSD1000, PSD1000F PSD PSD1000F PSD1000 - PSD1000F INSTRUCTION MANUAL Universal AC Input Switching Power Supply 24 Vdc Output DIN-Rail Models PSD1000, PSD1000F PSD1000 - Universal AC Input Switching Power Supply 24 Vdc Output ISM0089-4

More information

FLEX Ex Spring Clamp Terminal Base

FLEX Ex Spring Clamp Terminal Base Installation Instructions FLEX Ex Spring Clamp Terminal Base (Cat. No. 1797-TB3S) 1 10 11 4 Only remove this cover plug if connecting another terminal base unit. 3 5 6 12 2 7 8 9 41253 Component Identification

More information

BCM2 Series Branch Circuit Monitors Quick Setup Guide

BCM2 Series Branch Circuit Monitors Quick Setup Guide BCM2 Series Branch Circuit Monitors Quick Setup Guide Safety Information DANGER! HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Follow safe electrical work practices. See NFPA 70E in the USA, or applicable

More information

QUICK SETUP GUIDE. BCM2 Series Branch Circuit Monitors. Safety Information. Equipment Maintenance and Service. Raritan DANGER!

QUICK SETUP GUIDE. BCM2 Series Branch Circuit Monitors. Safety Information. Equipment Maintenance and Service. Raritan DANGER! QUICK SETUP GUIDE BCM2 Series Branch Circuit Monitors Safety Information DANGER! HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Follow safe electrical work practices. See NFPA 70E in the USA, or applicable

More information

Installation Instructions

Installation Instructions Installation Instructions (Cat. No. 1794-PS1) 1 2 3 4 5 7 6 Component Identification 1 Supply module 1794-PS1 2 Indicator 3 120/230V ac ground 4 120/230V ac common L2/N connections 5 120/230V ac power

More information

TRC-190 User s Manual

TRC-190 User s Manual First Edition, November 2008 www.moxa.com/product 2008 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. The software described in this manual is furnished under a license agreement

More information

Priva Blue ID Digital input module DI4/DI8/DI16

Priva Blue ID Digital input module DI4/DI8/DI16 Priva Blue ID Digital input module Modular design An Priva Blue ID DI4 Digital input module, Priva Blue ID DI8 Digital input module or Priva Blue ID DI16 Digital input module are used to take status and

More information

Installation and commissioning guide SmartLink PSD Power Supply Module (DC)

Installation and commissioning guide SmartLink PSD Power Supply Module (DC) Installation and commissioning guide SmartLink PSD Power Supply Module (DC) Rev. 1 September 2012 Part No. 4417551 Enraf B.V. P.O. Box 812 2600 AV Delft Netherlands Tel. : +31 15 2701 100 Fax : +31 15

More information

Table of Contents. Introduction... 2 Description...2 Specifications...3 Installation.. 5 Calibration.. 6 General Maintenance...7

Table of Contents. Introduction... 2 Description...2 Specifications...3 Installation.. 5 Calibration.. 6 General Maintenance...7 User's Manual: Series 330I Model 330I DC-Powered Three-Way Isolator Table of Contents Page Introduction... 2 Description....2 Specifications....3 Installation.. 5 Calibration.. 6 General Maintenance...7

More information

Discrete Output Modules IC697MDL750 24/48 Volt DC, 0.5 Amp, 32 Point Output Module

Discrete Output Modules IC697MDL750 24/48 Volt DC, 0.5 Amp, 32 Point Output Module March 2002 Discrete Output Modules IC697MDL750 24/48 Volt DC, 0.5 Amp, 32 Point Output Module Features 32 Points - Four isolated groups of eight points each 0.5 amp capacity per point High inrush capacity

More information

OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m

OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m Characteristics I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Main Range of product Product or component type Integrated connection type Mar 31, 2018 Modicon OTB I/O distributed module Discrete

More information

Description. Green. Red. Orange

Description. Green. Red. Orange GP3000 Series DIO Interface Installation Guide Caution Be sure to read the Warning/Caution Information on the attached sheet before using the product. CAUTION This manual describes the part names and general

More information

RE48ATM12MW on-delay timing relay s..300 h V AC - 2 OC

RE48ATM12MW on-delay timing relay s..300 h V AC - 2 OC Characteristics on-delay timing relay - 0.02 s..300 h - 24..240 V AC - 2 OC Product availability : Stock - Normally stocked in distribution facility Price* : 73.00 USD Main Range of product Product or

More information

Industrial Power Supplies

Industrial Power Supplies 50-600 Watt Features Switch mode power supplies for DIN-rail mounting 6 power ranges with 2, 3, 6, 12, 20 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise

More information

5.1. Motor Protection and Monitoring. Contents. Product Overview. Monitoring Relays. D64R Series Digital Ground Fault Relays...

5.1. Motor Protection and Monitoring. Contents. Product Overview. Monitoring Relays. D64R Series Digital Ground Fault Relays... .1 Ground Fault Relays and Monitors Contents Description Current.................. Phase................... Voltage.................. Ground Fault Relays and Monitors D64R Series Digital Ground Fault Relays....

More information

TM3DI16G module TM3-16 inputs spring

TM3DI16G module TM3-16 inputs spring Characteristics module TM3-16 inputs spring Main Range of product Product or component type Range compatibility Modicon TM3 Discrete input module Modicon M221 Modicon M241 Modicon M251 Discrete input number

More information

5601/5601A Input / Output (I/O) Module

5601/5601A Input / Output (I/O) Module 5601/5601A Input / Output (I/O) Module Installation, Operation and Maintenance Setup Manual 5/19/2011 Safety Information The information provided in this documentation contains general descriptions and/or

More information

SCADAPack Input/Output Module Hardware Manual. Version: February 2016

SCADAPack Input/Output Module Hardware Manual. Version: February 2016 SCADAPack Version: Date: February 2016 Table of Contents 1 Legal Information...6 2 Technical Support...7 3 Safety Information...8 4 Documentation...11 Check 5 About this Manual...13 6 About the 5607 I/O

More information

SCADAPack 350E 357E. Smart Remote Terminal Unit

SCADAPack 350E 357E. Smart Remote Terminal Unit SCADAPack 350E 357E Smart Remote Terminal Unit 1 The SCADAPack 300E Smart RTU is a platform built on a 32-bit processor and fitted with a 12-30 Vdc supply, various communication links and a wide range

More information

DX561 Digital Input/Output Module

DX561 Digital Input/Output Module Ordering Data DATA SHEET DX561 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R2301 1TNE 968 901 R3101 DX561, digital input/output module, 8 DI

More information

Installation Instructions for Eaton Surge Protective Device XXCFXXX10-DIN and XXCFXXX10-DIN2

Installation Instructions for Eaton Surge Protective Device XXCFXXX10-DIN and XXCFXXX10-DIN2 Supersedes 6/2015 Surge Protective Device XXCFXXX10-DIN and XXCFXXX10-DIN2 XXCFXXX10-DIN Contents Description Page 1.0 Setup...2 1.1 Before Installation...2 1.2 Installation...3 For AC Applications...3

More information

SCADAPack 32. Smart RTU

SCADAPack 32. Smart RTU SCADAPack 32 Smart RTU 1 Compared to the SCADAPack 300 platform, the SCADAPack 32 is a higher performance Smart RTU built to meet the demands of larger applications including support for up to 10 gas flow

More information

MINI-PS AC/10-15DC/8

MINI-PS AC/10-15DC/8 Primary-Switched Power Supply, Narrow Design Data Sheet 08/2004 MINI POWER provides: An extra narrow design, with widths of 22.5 mm, 45 mm, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a

More information

Mini Digital Multimeter

Mini Digital Multimeter User Manual Mini Digital Multimeter Model MN15A Additional User Manual Translations available at www.extech.com Introduction Congratulations on your purchase of the Extech MN15A MultiMeter. The MN15A offers

More information

Discrete Output Modules IC697MDL740

Discrete Output Modules IC697MDL740 55 1 IC697MDL740 (IC697MDL740) datasheet Features 16 Points - Four isolated groups of 4 points each 2 amp capacity per point High inrush capacity (10x rated current) Functions The 24/48 Volt DC 2 Amp Output

More information

RM17TG. Main. Product or component type. Product specific application. Relay monitored parameters. Switching capacity in VA

RM17TG. Main. Product or component type. Product specific application. Relay monitored parameters. Switching capacity in VA Characteristics phase control relay RM17-T - range 183..484 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters Switching

More information

Discrete Output Modules IC697MDL750

Discrete Output Modules IC697MDL750 54 IC697MDL750 (IC697MDL750) datasheet Features 32 Points - Four isolated groups of 8 points each a44709 0.5 amp capacity per point High inrush capacity (20x rated current) Functions The 24/48 Volt DC

More information

DC562, digital input/output module,

DC562, digital input/output module, Ordering Data DATA SHEET DC562 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 231 900 R0000 1TNE 968 901 R3101 1TNE 968 901 R3102 1TNE 968 901 R3103 1TNE

More information

Redundancy unit CP-A RU

Redundancy unit CP-A RU 2CDC 271 010 F0t06 Features Decoupling of CP power supply units with 2 inputs, each up to 20 A per input / channel Output up to 40 A True redundancy by 100 % decoupling of two parallel connected power

More information

Model Number Structure

Model Number Structure Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater

More information

EMS467 Monitoring System. Installation and Operations Manual Section 40

EMS467 Monitoring System. Installation and Operations Manual Section 40 EMS467 Monitoring System Installation and Operations Manual 00-02-0672 01-26-10 Section 40 In order to consistently bring you the highest quality, full featured products, we reserve the right to change

More information

See instructions to download and install the latest version of LinkBoxLON and the user's manual at

See instructions to download and install the latest version of LinkBoxLON and the user's manual at Safety Instructions WARNING Follow carefully this safety and installation instructions. Improper work may lead to serious harmful for your health and also may damage seriously the IntesisBox and/or any

More information

G3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend

G3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures

More information

TRC-190 User s Manual

TRC-190 User s Manual User s Manual Edition 3.2, May 2017 www.moxa.com/product 2017 Moxa Inc. All rights reserved. User s Manual The software described in this manual is furnished under a license agreement and may be used only

More information

XPSMCMDI Input expansion module with screw term

XPSMCMDI Input expansion module with screw term Characteristics 16 Input expansion module with screw term Main Range of product Product or component type Device short name Electrical connection [Us] rated supply voltage Number of inputs Number of outputs

More information

RSTI-EP Slice I/O. Analog Input Modules `EP-3164, EP-3264, EP-3124, EP-3368, EP-3468 EP-3704, EP GFK-2960B November 2017

RSTI-EP Slice I/O. Analog Input Modules `EP-3164, EP-3264, EP-3124, EP-3368, EP-3468 EP-3704, EP GFK-2960B November 2017 November 2017 Module Status LED Channel Status LEDs Digital Input Connector Ground 24 V DC FE Analog Input Module RSTI-EP Slice I/O Analog Input Modules `EP-3164, EP-3264, EP-3124, EP-3368, EP-3468 EP-3704,

More information

Series AME25-JZ 25 Watt AC-DC / DC-DC Converter

Series AME25-JZ 25 Watt AC-DC / DC-DC Converter FEATURES: Click on Series name for product info on aimtec.com Series AME-JZ I/O Isolation 000VAC Low Ripple and Noise Operating Temp: -0 C to +70 C Over Voltage Protection Over current Protection Up to

More information

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application 33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection

More information

DM-918 OPERATIONS MANUAL AUTORANGING MULTIMETER

DM-918 OPERATIONS MANUAL AUTORANGING MULTIMETER DM-918 OPERATIONS MANUAL AUTORANGING MULTIMETER SAFETY INFORMATION The following safety information must be observed to ensure maximum personal safety during the operation of this meter: This meter is

More information

QUICK SETUP GUIDE PMC-1000, PMC-1001, PMM-1000, PMB-1960, PMMC-1000 PM Series Power Meter

QUICK SETUP GUIDE PMC-1000, PMC-1001, PMM-1000, PMB-1960, PMMC-1000 PM Series Power Meter QUICK SETUP GUIDE PMC-1000, PMC-1001, PMM-1000, PMB-1960, PMMC-1000 PM Series Power Meter Safety Information DANGER! HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Follow safe electrical work practices.

More information

Clipsal Bus Couplers. Two Channel (SLC5102BCLEDL) and Four Channel (SLC5104BCL) for Use with C-Bus Wired Systems

Clipsal Bus Couplers. Two Channel (SLC5102BCLEDL) and Four Channel (SLC5104BCL) for Use with C-Bus Wired Systems Clipsal Bus Couplers Two Channel (SLC5102BCLEDL) and Four Channel (SLC5104BCL) for Use with C-Bus Wired Systems Instruction Bulletin Retain for future use. Clipsal Bus Couplers 63249-420-236A2 Instruction

More information

Installation Instructions

Installation Instructions Installation Instructions (Cat. No. 1794-TBN) 6 1 5 9 4 2 3 10 6 7 8 Component Identification 1 Female flexbus connector 2 Terminal base unit (1794-TBN) 3 Male flexbus connector 4 Keyswitch Set to the

More information

PGR-4300 MANUAL GENERATOR GROUND-FAULT RELAY

PGR-4300 MANUAL GENERATOR GROUND-FAULT RELAY Tel: +1-800-832-3873 E-mail: techline@littelfuse.com www.littelfuse.com PGR-4300 MANUAL GENERATOR GROUND-FAULT RELAY REVISION 3-B-041318 Copyright 2018 by Littelfuse, Inc. All rights reserved. Document

More information

TM221CE40R controller M IO relay Ethernet

TM221CE40R controller M IO relay Ethernet Characteristics controller M221 40 IO relay Ethernet Main Range of product Product or component type [Us] rated supply voltage Jan 6, 2019 Modicon M221 Logic controller 100...240 V AC Discrete input number

More information