PEAK TM. SMART Equipment Controllers. Product bulletin

Transcription

1 PEAK TM SMART Equipment Controllers Product bulletin The PEAK family of SMART Equipment Controllers comprises a group of versatile field controllers specifically designed for the HVAC/R market. The controller s communication can be switched between using MS/TP, Modbus, and N2 communications protocols in real time without any controller software downloads. With a simple configuration change through the local display or Mobile Access Portal (MAP) Gateway, the system protocol changes for valid communication. In MS/TP mode, they are BACnet Master-Slave/Token-Passing (MS/TP) network compliant field controllers designed to monitor, control, and integrate a wide variety of HVAC/R and other building equipment. In N2 mode, they can be used to maintain or modernize sites with installed legacy Johnson Controls controllers. In Modbus mode, the controller uses the Modbus RTU slave mode to communicate with any Modbus Master that is properly configured. This family of controllers includes the PEAK 18 and 32 controllers, PEAK Input/Output Module (IOM), which integrate into the web-based Metasys system or any other third-party BACnet system. By utilizing the equipment model technology, all PEAK Series controllers become part of Verasys system (future light commercial system for Johnson Controls). Note: The PEAK IOM modules are not capable, nor required, to work as N2 or Modbus devices as they communicate through the SA bus from a field controller. The PEAK Series models feature an advanced design that provides optimum performance and easy access to power, network, and field terminations. These controllers come with 32-bit microprocessors to meet and exceed demanding industry standards. Some PEAK models include an intuitive user interface with an integral LCD screen and a 4-button navigation touchpad that provides enhanced local monitoring of your controlled field equipment. The PEAK controller family integrates easily with the NS Series Network Sensors. A wide variety of network sensor models provides options for measuring and displaying zone temperature, duct temperature, zone humidity, carbon dioxide level, setpoint adjustments, fan speed control, and discharge air temperatures. The PEAK Series models also feature two dedicated device layer communication buses. Use the traditional Sensor Actuator bus for integrating IOM and any other ancillary released SA bus devices. The second bus is a dedicated Modbus RTU Master bus for any thirdparty Modbus device. These can include, for example, existing off the shelf compressors, variable frequency drives (VFD), sensors, and electronic expansion valves (EEV).

2 Features Configurable controller Eliminates the need for software or programming in the field. Factory commission and programmed. Only configuration of parameters in the field through local display or MAP. Large product family Provides a wide range of point mix to meet application requirements and allows for the addition of one or more IOMs and/or Network Sensors to provide even more I/O capacity. Standard software and application development Uses a common hardware design throughout the family line to support standardized wiring practices and installation workflows. Also uses a common software design to support use of a single tool for ontrol applications, commissioning, and troubleshooting to minimize technical training. Onboard display with real time clock to support local scheduling and trends Provides an onboard display for configuration and commissioning of the equipment, validation of controls, validation of alarms, faults, and control. Optional mobile interface Allow monitoring, servicing, and commissioning of the equipment through the MAP gateway, utilizing any smart mobile devices. Real-time switchable language A single application can support up to four languages on the onboard local display. Equipment model technology Provides a standardized and dynamic way to expose equipment information though user interfances and to the system level enabling plug and play support on future Verasys connectivity Predefined alarms and trends Based on the application all alarms and trends will be predefined within the controller. Real-time switchable communications protocols Communicates from BACnet MS/TP, N2, or Modbus through the onboard local display or Mobile Access Portal gateway. Standard BACnet Protocol BACnet Testing Laboratories (BTL) Listing Rev 12 provides interoperability with other Building Automation Systems (BAS) products that use the widely accepted BACnet standard. Standard Sensor Actuator (SA) bus Supports interconnection with smart end devices and extension modules minimizing wirings. Dedicated Modbus Integration bus Provides interoperability with other Modbus devices through the dedicated Modbus master port. 2

3 Integration into the Metasys System Supervisory Devices The PEAK family is designed to integrate seamlessly into any Network Automation Engine (NAE) or Network Control Engine (NCE). This seamless integration of field controllers with Metasys supervisory controllers enables building operators to monitor and adjust field controllers directly from the Metasys system UI. In addition, service personnel can view field controller information locally through the integral LCD or through an optional local controller display available for field controllers or through the MAP Gateway. PEAK Topology Integration to the third-party system The PEAK family is designed to integrate seamlessly into any third-party native BACnet system by utilizing BACnet standard methods of integration. Also, any Modbus system can be an option based on the integration methods for this protocol. In the case of Modbus, the PEAK controllers communicate in Modbus Slave mode to the third-party Modbus supervisory. Communications protocols By default, the PEAK family controllers, IOM modules, and network sensors communicate using the standard BACnet protocol, based on the American National Standards Institute (ANSI)/American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE). The BACnet protocol is a standard for ANSI, ASHRAE, and the International Standards Organization (ISO) for building controls. When the controllers are used as MS/TP devices, they are BACnet Advanced Application Controllers (B-AAC). IOM controllers are BTL-tested and listed as BACnet Application Specific Controllers (B-ASCs). PEAK 18 and 32 controllers are BTL-listed as BACnet Advanced Application Controllers (B-AACs) Revision 12. The NS Series Sensors are BTL-listed as BACnet Smart Sensors (B-SSs). Equipment model With the equipment model, customers can create their own user experience for their equipment and application. When the PEAK controllers are provisioned at the factory with the customized package, the onboard local display and the all mobile user experiences follow the customization without additional programming. The equipment model customization becomes part of the firmware download of the controller, which can be either factory commissioned or uploaded in the field through the onboard USB port. 3

4 Hardware and installation PEAK controllers are encased in a durable plastic housing. The plastic housing may eliminate the need for a separate enclosure for plenum-rated construction. Check specific controller documentation and regional, national, and local code requirements for appropriate applications. PEAK controllers feature bright, color-coded LEDs, visible on the controller cover, that indicate the supply power, communications bus, as well as a variety of fault conditions to aid troubleshooting the controller and bus. The field controllers feature removable, color-coded, keyed, and labeled terminal block plugs for the supply power and communications bus terminations. Most models have fixed, color-coded, and labeled terminal blocks or spade connectors for ease of factory mounting for the input and output terminations, which facilitate installing and servicing the controllers. On all PEAK controllers, and PEAK IOM Series Controllers, integral mounting clips and a DIN rail track on the controller back-plate allow you to easily mount the field controller either on a horizontal section of 35 mm DIN rail or directly to a wall or flat vertical surface. Some PEAK models have a backlit user interface display with four- button keypad for navigation. The easy-touse display provides convenient commissioning, local monitoring, and adjusting of key setpoints and control parameters. For the PEAK models without a display, MAP Gateway can be used connected to the SA bus and with utilizing any mobile smart devices provides you with commission, local monitoring, and configuration of any parameters within the controller. PEAK 18 and 32 series point type counts Point types Signals accepted PK-OEM18xx-x PK-OEM32xx-x Universal Input (UI) Analog Input, Voltage Mode, 0 to 10 VDC Analog Input, Current Mode, 4 to 20 ma, resistive or dry contacts 5 6 Binary Input (BI) Dry Contact Maintained Mode Pulse Counter/Accumulator Mode (High Speed) 4 12 * Binary Output (BO) 24 VAC and 240 VAC Triac 2 4 Configurable Output (CO) Analog Output, Voltage Mode, 0 to 10 VDC, or 24 VAC (0.5A) Triac 3 4 Relay Output (RO) 2 double insulated 240VAC SPST 2 SPST 240 VAC (do not require double insulation) 1 SPDT 240 VAC relay (separate from other circuits and 0 5 double insulated) Relay Output (RO) 4 SPST 240 VAC 4 0 Pulse Width Modulation (PWM) PWM 0 to 15 VDC selectable 5 V, 10 V, and 15 V at 10 ma, maximum 100 Hz 0 1 Note * Six are dry contact or Pulse, and six are non-critical 24 VAC BIs. 4

5 PEAK Input/Output Module (IOM) The IOM Series Controllers are BACnet Application Specific Controllers (B-ASCs) with integral RS-485 MS/TP communications. IOM controllers integrate into the PEAK family of controllers, by utilizing the SA bus. IOMs can serve on the SA Bus of the PEAK family of controllers; the IOMs expand the point count of these controllers. A full range of PEAK models combined with the IOM models can be applied to a wide variety of building applications ranging from simple fan coil or heat pump control to advanced central plant management. PEAK IOM series point types counts Point types Universal Input (UI) Binary Input (BI) Analog Output (AO) Binary Output (BO) Universal Output (UO) Configurable Output (CO) Relay Output (RO) (-0 models only) Relay Output (RO) (-1 models only) Relay Output (RO) (-2 models only) Signals accepted Analog Input, Voltage Mode, 0 to 10 VDC Analog Input, Current Mode, 4 to 20 ma Analog Input, Resistive Mode, 0 to 2 K Ohm, RTD (1K N1 [Johnson Controls], 1k PT, A99B SI), NTC (10K Type L, 2.252k Type 2) Binary Input Dry Contact Maintained Mode Dry Contact Maintained Mode Pulse Counter/ Accumulator Mode (High Speed), 100 Hz Analog Output, Voltage Mode, 0 to 10 VDC Analog Output, Current Mode, 4 to 20 ma IOM1711 IOM2711 IOM2721 IOM3711 IOM3721 IOM3731 IOM VAC Triac Analog Output, Voltage Mode, 0 to 10 VDC Binary Output Mode, 24 VAC/DC FET Analog Output, Current Mode, 4 to 20 ma Analog Output, Voltage Mode, 0 to 10 VDC Binary Output Mode, 24 VAC Triac to 240 VAC VAC, SELV VAC

6 Wireless Commissioning Converter The Wireless Commissioning Converter provides a temporary Bluetooth connection between the PEAK family of controllers and the laptop computer used to commission them. It allows application developer to commission and service the controllers over a wireless connection. The Wireless Commissioning Converter provides communication from the BACnet MS/TP FC Bus or the SA Bus to a Bluetooth-enabled computer running the CCT software. Any controller on an FC Bus can be commissioned by connecting to any other controller, any sensor, or any IOM, connected to any controller on the bus. The 2.4 GHz Bluetooth connection allows you to be up to 10 m away while you commission the controller with a laptop computer and the CCT software. Wireless Commissioning Converter Features The Wireless Commissioning Converter provides the following features: Bluetooth wireless communication Provides a secure and reliable untethered connection between the laptop and the PEAK family of controllers. Standard connection jacks On both the PEAK sensors and controllers provide multiple connection points to the system. The Wireless Commissioning Converter Allows online access to controllers while the technician is using the Bluetooth-enabled laptop. Standard Bluetooth technology Allows you to use a Bluetooth-enabled laptop or any laptop with a commercial off-the-shelf Bluetooth adapter. 6

7 Mobile Access Portal Gateway The MAP Gateway is a pocket-sized web server that provides a wireless mobile user interface for Smart Equipment. Small, lightweight, and easy to use, the MAP Gateway joins the rapidly expanding list of Johnson Controls products that leverage the power of mobility and smart devices to improve daily operations. Offering many-to-one, multi-client connectivity, the MAP Gateway gives users access to any Smart Equipment device that is on a connected BACnet Master-Slave/ Token-Passing (MS/TP) fieldbus. The MAP Gateway solution is conveniently sized, has a built-in wireless access point, and allows personnel to use an intuitive, browser-based interface to access advanced features like alarms and point configuration. The wireless connection on the MAP Gateway allows users to be up to 31 m away (line of sight) indoors and up to 91 m away (line of sight) outdoors while using a supported mobile device. Power may be supplied through the Sensor/Actuator (SA) bus, Field Controller (FC) bus, or through the included AC power supply. The MAP Gateway may be used as a portable device that can be moved from site to site, depending on the needs and workflow of field personnel. During use, the MAP Gateway is plugged into an SA bus or FC bus. A stationary version of the MAP Gateway is available that can be permanently mounted and plugged into the SA bus or FC bus of a field controller. The MAP Gateway user interface is accessed either over Wi-Fi or an existing Ethernet network on site. The stationary version is permanently mounted in a mounting bracket that may be clipped onto a DIN rail or attached with screws to a stable, flat surface. Features The MAP Gateway provides the following features: Multi-client support Provides access to all identifiable devices connected to the BACnet MS/TP trunk. Easy-to-use interface Offers a local display replacement solution that allows users to access device information through any supported web browser. Advanced features Allow you to view alarms, set points, view trends, and commission devices. Installation When the MAP Gateway is used as a portable device, it has minimal installation and wiring requirements. During use, the unit should be housed in a supplied silicone shell, and the unit may be hung on nearby equipment using a supplied lanyard. To use the MAP Gateway, the unit is physically connected to a Sensor Actuator (SA) port or Field Controller (FC) port using a field bus adapter. When the MAP Gateway is used as a stationary device, it is housed in a mounting bracket that may be used to mount the unit on a DIN rail or on a flat wall surface. The MAP Gateway mounting bracket is designed so that the unit may be mounted flush or on the side. To use the MAP Gateway, the unit can be physically connected to an existing facilities network through the MAP Gateway Ethernet port. MAP Gateway can also be used as a Wi-Fi access point. For installation instruction of MAP please refer to Mobile Access Portal Gateway Installation Instructions, Part N

8 Network Sensors The NS Series Network Sensor offering includes NS Series Network Zone Sensors and NS Series Network Discharge Air Sensors. The NS Series Network Zone Sensors are designed to function directly with PEAK family of controllers, IOMs. Several models of network zone sensors monitor room temperature. Options are available to also monitor zone humidity, carbon dioxide (CO 2 ), local temperature setpoint adjustments, and other variables. This data is transmitted to a field controller on the SA Bus. The NS Series Network Zone Sensors include models with a temperature setpoint dial and LCD that allows occupants to view the zone temperature and view and adjust the zone temperature setpoint. A fan mode push button is included to set the desired fan speed (AUTO-OFF-low-medium-high). An occupancy override function allows the user to signal the controller that the zone is occupied to override the scheduled mode. Some models have DIP switches to set a unique address for applications that require multiple sensors. For communication wiring flexibility, the wires connecting the network zone sensor to a controller can be terminated using a modular jack or screw terminals. Each network zone sensor includes an SA Bus access port to allow accessories to access the SA Bus. This plug allows accessories to service or commission the connected controller or gain access to any other controller on the same FC Bus. The NS Series Network Discharge Air Sensors are electronic duct sensors designed to function directly with the Johnson Controls PEAK family of digital controllers in HVAC/R systems. Models in this series monitor the duct temperature, and transmit this data to a PEAK controllers on the SA Bus using the 305 cm wiring lead included with the unit. The 305 cm wiring lead consists of four 22 AWG tradesize color-coded wires encased in a plenumrated jacket. Each of the wires is stripped and tinned for easy connection to the SA Bus screw terminal block. The NS Series Network Discharge Air Sensors are available with either a 102 or 203 mm temperature probe. All models include DIP switches for applications requiring multiple discharge air sensors, each with a unique DIP switch address. 8

9 Ordering information PEAK series Product code PK-OEM PK-OEM PK-OEM PK-OEM PK-OEM PK-OEM Description PEAK 18, 24 Volts no Display 5 UI, 4 BI, 2 BO, 4 RO, and 3 CO PEAK 18, 24 Volts with Display 5 UI, 4 BI, 2 BO, 4 RO, and 3 CO PEAK 18, 240 Volts no Display 5 UI, 4 BI, 2 BO, 4 RO, and 3 CO PEAK 18, 240 Volts with Display 5 UI, 4 BI, 2 BO, 4 RO, and 3 CO PEAK 32, 24 Volts no Display 6 UI, 12 BI, 4 BO, 5 RO, 4 CO and 1 PWM PEAK 32, 24 Volts with Display 6 UI, 12 BI, 4 BO, 5 RO, 4 CO and 1 PWM PEAK IOM series Product code Description UL and cul (Canada) CE Marked PK-IOM Point IOM with 4 BI, FC Bus, and SA Bus Support PK-IOM Point IOM with 2 UI, 2 UO, 2 BO, FC Bus, and SA Bus Support. --- Relays are rated for 240 VAC. PK-IOM Point IOM with 8 UI, 2 AO, FC Bus, and SA Bus Support PK-IOM Point IOM with 4 UI, 4 UO, 4 BO, FC Bus, and SA Bus Support. --- Relays are rated for 240 VAC. PK-IOM Point IOM with 16 BI, FC Bus, and SA Bus Support PK-IOM Point IOM with 8 BI, 8 BO, FC Bus, and SA Bus Support PK-IOM Point IOM with 6 UI, 2 BI, 3 BO, 2 AO, 4 CO, FC and SA Bus Support Field Equipment Controller family accessories (order separately) Product code PK-KIT PK-KIT PK-KIT NS Series Sensors TL-MAP1810-0PE TL-BRTRP-0 MS-BACEOL-0 Description PEAK 18, 24 Volts removable terminal block kit for all spade connections PEAK 18, 240 Volts removable terminal block kit for all spade connections PEAK 32, 24 Volts removable terminal block kit for all spade connections NS Series Network Sensors Refer to the NS Series Network Sensors Product Bulletin (LIT ) for specific sensor model descriptions. Portable MAP Gateway includes MAP Gateway, RJ-12 cable, protective shell and lanyard. Portable BACnet IP to MS/TP Router Terminator module providing EOL termination on FC Bus and N2 segments 9

10 Technical specification PEAK controller series (Part 1 of 2) PK-OEM1810-0: PEAK 18, 24 Volts no Display 5 UI, 4 BI, 2 BO, 4 RO and 3 CO PK-OEM1820-0: PEAK 18, 24 Volts with Display 5 UI, 4 BI, 2 BO, 4 RO and 3 CO PK-OEM1811-0: PEAK 18, 240 Volts no Display 5 UI, 4 BI, 2 BO, 4 RO and 3 CO Product code numbers PK-OEM1821-0: PEAK 18, 240 Volts with Display 5 UI, 4 BI, 2 BO, 4 RO and 3 CO PK-OEM3210-0: PEAK 32, 24 Volts no Display 6 UI, 12 BI, 4 BO, 5 RO, 4 CO and 1 PWM PK-OEM3220-0: PEAK 32, 24 Volts with Display 6 UI, 12 BI, 4 BO, 5 RO, 4 CO and 1 PWM Supply voltage 24 Volts: 24 VAC (nominal, 20 VAC minimum/30 VAC maximum), 50/60 Hz, power supply Class 2 (North PEAK 18 / PEAK 32 America), Safety Extra-Low Voltage (SELV) (Europe) 240 Volts: 90 to 240 VAC, 50/60 Hz, power supply Class 1 (North America), Safety Extra-Low Voltage PEAK 18 (SELV) (Europe) 20 VA Maximum Power consumption VA rating does not include any power supplied to the peripheral devices connected to Binary Outputs (BOs) or Configurable Outputs (COs), which can consume up to 12 VA for each BO or CO; for a possible total consumption of an additional 60 VA (maximum). Ambient conditions Operating -20 to 70 C; 10 to 95% RH noncondensing; Pollution Degree 2 Storage -40 to 85 C; 5 to 95% RH noncondensing BACnet MS/TP: 60 VA; valid field controller device addresses (Device addresses 0 3 and Controller addressing are reserved and not valid field controller addresses.) N2: Valid field controller device addresses 1 to 255 BACnet MS/TP, MODBUS (Master/Slave) and N2 via RS-485: 3-wire FC Bus between the supervisory controller and field controller addresses). Communications Bus 3-wire SA Bus between controller, network sensors, and other sensor/actuator devices, includes a leadto source 15 VDC supply power (from controller) to bus devices. 3-wire one Modbus communication half-duplex (Master RTU port) Processor RX631 Renesas 32-bit microcontroller Memory 16 MB flash memory and 8 MB RAM Input and Output capabilities Five Universal Inputs: User-Configurable, 3 available modes: Voltage Input: 0 to 10 VDC Current Sense Input: 4 to 20 ma Resistive Inputs/Dry Contact Inputs Four Binary Inputs: Defined as Dry Contact maintained or Pulse Counter/Accumulator Mode (High Speed), 100 HZ Three Configurable Outputs: User-Configurable, 2 available modes: PEAK 18 Analog Output: 0 to 10 VDC, 10 ma Triac Output: 24 VAC, 0.5 A (Externally source powered) Four Binary Outputs (Relays): Single-Pole, Single-Throw. Dry Contacts rated 240 VAC. UL: 5 A Resistive, 1.9 FLA/11.1LRA, D300 Pilot Duty, 70 C/158 F (30,000 cycles) IEC: 3 A Resistive, 3 A Inductive, Cos(phi)=0.6, -20 to 70 C (-4 to 158 F) (100,000 cycles) Two Binary Outputs (Triacs): Output: 24 VAC or 240 VAC, 0.5 A (Externally Powered). Note: Reference all triac commons to the same pole of the supply circuit. Utility Output Power Port: Ability to deliver 24 VAC...Continued... 10

11 Technical specification PEAK controller series (Part 2 of 2) Six Universal Inputs: User-Configurable, 3 available modes: Voltage Input: 0 to 10 VDC Current Sense Input: 4 to 20 ma Resistive Inputs/Dry Contact Inputs Twelve Binary Inputs: Defined as Dry Contact maintained or Pulse Counter/Accumulator Mode (High Speed), 100 HZ Four Configurable Outputs: User-Configurable, 2 available modes: Analog Output: 0 to 10 VDC, 10 ma PEAK 32 Triac Output: 24 VAC, 0.5 A (Externally sourced powered) Five Binary Outputs (Relays): 2 Single-Pole, Single-Throw. Dry Contacts rated 240 VAC, 1 SPDT 240 VAC, 2 double insulated SPST, 240 VAC UL: 5 A Resistive, 1.9 FLA/11.1LRA, D300 Pilot Duty, 70 C/158 F (30,000 cycles) IEC: 3 A Resistive, 3 A Inductive, Cos(phi)=0.6, -20 to 70 C (-4 to 158 F) (100,000 cycles) Four Binary Outputs (Triacs): Output: 24 VAC or 240 VAC, 0.5 A (Externally Powered) One Pulse Width Modulation: PWM 0 to 15 VDC at 10 ma maximum 100 HZ Note: Reference all triac commons to the same pole of the supply circuit. Resolution and accuracy Analog Input 15-bit resolution Analog Output 15-bit resolution, +/- 200 mv accuracy in 0 to 10 VDC applications Terminations Input/Output: Fixed spade terminals SA/FC/Modbus: 4-Wire and 3-Wire pluggable screw terminal PEAK 18 / PEAK 32 blocks SA Bus tool port: RJ-12 6-Pin modular jacks Mounting PEAK 18 / PEAK 32 Field install option Housing Dimensions (Height x Width x Depth) Weight Compliance Input/Output: Fixed solder terminals SA/FC/Modbus: 4-Wire and 3-Wire pluggable screw terminal blocks SA Bus tool port: RJ-12 6-Pin modular jacks Horizontal on single 35 mm DIN rail mount (preferred), or screw mount on flat surface with three integral mounting clips on controller Polycarbonate Lexan SABIC EXL Volts: 150 x 164 x 53 mm including terminals and mounting clips PEAK Volts: 150 x 190 x 53 mm including terminals and mounting clips PEAK Volts: 150 x 220 x 53 mm including terminals and mounting clips 0.5 kg United States Canada Europe Australia and New Zealand BACnet International UL Listed, File E107041, CNN PAZL UL 916, Energy Management Equipment, FCC Compliant to CRF47, Part 15, Subpart B, Class A UL Listed, File E107041, CNN PAZX7 CAN/CSA C22.2 No.205, Signal Equipment Industry Canada Compliant, ICES Volt Models: Johnson Controls declares that this product is also in compliance with the essential requirements and other relevant provisions of the EMC Directive and Declared as Electronic Independently mounted control, suitable for DIN rain mounting. Intended to mount in remote panel. Type 1.C (Micro-interruption) for relays, 330 V rated impulse voltage. 125 C ball pressure test. 240 Volt Models: Johnson Controls declares that this product is also in compliance with the essential requirements and other relevant provisions of the EMC Directive and Low Voltage Directive Declared as Electronic Independently mounted control, suitable for DIN rail mounting. Intended to mount in remote panel. Type 1.C (Micro-interruption) for relays, 2,500 V rated impulse voltage. 125 C ball pressure test. RCM Mark, Australia/NZ Emissions Compliant BACnet Testing Laboratories (BTL) Protocol Revision 12 Listed BACnet Application Advanced Controller (B-AAC) 11

12 Technical specification PEAK IOM series (Part 1 of 2) Product code numbers Supply voltage Power consumption Ambient conditions Operating Storage Addressing Communications Bus Processor Memory Input and Output capabilities PK-IOM1711 PK-IOM2711 PK-IOM2721 PK-IOM3711 PK-IOM3721 PK-IOM1711-0: 4-Point IOM with 4 BI, FC Bus and SA Bus Support PK-IOM2711-2: 6-Point IOM with 2 UI, 2 UO, 2 BO, FC Bus, and SA Bus Support. Relays are rated for 240 VAC. PK-IOM2721-0: 10-Point IOM with 8 UI, 2 AO, FC Bus, and SA Bus Support PK-IOM3711-2: 12-Point IOM with 4 UI, 4 UO, 4 BO, FC Bus, and SA Bus Support. Relays are rated for 240 VAC PK-IOM3721-0: 16-Point IOM with 16 BI, FC Bus, and SA Bus Support PK-IOM3731-0: 16-Point IOM with 8 BI, 8 BO, FC Bus, and SA Bus Support PK-IOM4711-0: 17-Point IOM with 6 UI, 2 BI, 3 BO, 2 AO, 4 CO, FC and SA Bus Support 24 VAC (nominal, 20 VAC minimum/30 VAC maximum), 50/60 Hz, Power Supply Class 2 (North America), Safety Extra-Low Voltage (SELV) Europe 14 VA maximum Note: VA ratings do not include any power supplied to the peripheral devices connected to Binary Outputs (BOs) or Configurable Outputs (COs), which can consume up to 12 VA for each BO or CO, for a possible total consumption of an additional 84 VA (maximum), depending on the IOM model. 0 to 50 C; 10 to 90% RH noncondensing -40 to 80 C; 5 to 95% RH noncondensing DIP switch set; valid field controller device addresses (Device addresses 0 3 and are reserved and not valid IOM addresses). BACnet MS/TP, RS-485 wire FC Bus between the supervisory controller and field devices 4-wire SA Bus between field controller, network sensors, and other sensor/actuator devices. Includes a lead source 15 VDC supply power (from field controller) to bus devices. H8SX/166xR Renesas 32-bit microcontroller 512 KB flash memory and 128 KB RAM 4 - Binary Inputs: Defined as Dry Contact Maintained or Pulse Counter/ Accumulator Mode 2 - Universal Inputs: Defined as 0 to 10 VDC, 4 to 20 ma, 0 to 600k ohm, or Binary Dry Contact 2 - Universal Outputs: Analog Output: Voltage Mode, 0-10 VDC; Binary Output Mode: 24 VAC/DC FET; Analog Output: Current Mode, 4 to 20 ma 2 - Relay Outputs: (Single-Pole, Double-Throw); UL 916 (-0 model only): 1/4 hp 120 VAC, 1/2 hp 240 VAC; 360 VA Pilot Duty at 120/240 VAC (B300); 3 A Non-inductive 24 to 240 VAC; EN (-2 model only): 6 (4) A N.O. or N.C. only, 240 VAC 8 - Universal Inputs: Defined as 0 to 10 VDC, 4 to 20 ma, 0 to 600k ohm, or Binary Dry Contact 2 - Analog Outputs: Defined as 0 to 10 VDC or 4 to 20 ma 4 - Universal Inputs: Defined as 0 to 10 VDC, 4 to 20 ma, 0 to 600k ohm, or Binary Dry Contact 4 - Universal Outputs: Analog Output: Voltage Mode, 0 to 10 VDC; Binary Output Mode: 24 VAC/ DC FET; Analog Output: Current Mode, 4 to 20 ma 4 - Relay Outputs: (Single-Pole, Double-Throw); UL 916 (-0 model only): 1/4 hp 120 VAC, 1/2 hp 240 VAC; 360 VA Pilot Duty at 120/240 VAC (B300); 3 A Non-inductive VAC; EN (-2 model only): 6 (4) A N.O. or N.C. only, 240 VAC 16 - Binary Inputs: Defined as Dry Contact Maintained or Pulse Counter/Accumulator Mode...Continued... 12

13 Technical specification PEAK IOM series (Part 1 of 2) Input and Output capabilities 8 - Binary Inputs: Defined as Dry Contact Maintained or Pulse Counter/Accumulator Mode 8 - Binary Outputs: Defined as 24 VAC Triac (Require external low-voltage power source.) PK-IOM3731 Note: Binary Outputs (BOs) on MS-IOM3731-0A controllers do not supply power for the outputs; the BOs require external low-voltage (< 30 VAC) power sources. 6 - Universal Inputs: Defined as 0 10 VDC, 4 20 ma, 0 600k ohm, or Binary Dry Contact 2 - Binary Inputs: Defined as Dry Contact Maintained or Pulse/Counter Accumulator Mode PK-IOM Binary Outputs: Defined as 24 VAC Triac (selectable internal or external source power) 4 - Configurable Outputs: Defined as 0 10 VDC or 24 VAC Triac BO 2 - Analog Outputs: Defined as 0 10 VDC or 4 20 ma Resolution and accuracy Analog Input 16-bit resolution Analog Output 16-bit resolution and ±200 mv in 0 10 VDC applications Input/Output: Fixed Screw Terminal Blocks Terminations SA/FC Bus and Supply Power: 4-wire and 3-wire Pluggable Screw Terminal Blocks SA/FC Bus Port: RJ-12 6-Pin Modular Jacks Horizontal on single 35 mm DIN rail mount (preferred), or screw mount on flat surface with three Mounting integral mounting clips on controller Enclosure material: ABS and polycarbonate UL94 5VB; self-extinguishing, Plenum-rated protection Housing class: IP20 (IEC529) Dimensions (Height x Width x Depth) PK-IOM17 / PK-IOM27 Models PK-IOM2721 / PK-IOM3721 / PK-IOM3731 Models PK-IOM37 / PK-IOM47 Models Weight Compliance United States Canada Europe Australia and New Zealand BACnet International 150 x 120 x 53 mm including terminals and mounting clips 150 x 164 x 53 mm including terminals and mounting clips 150 x 190 x 53 mm including terminals and mounting clips Note: Mounting space for all field controllers requires an additional 50 mm space on top, bottom and front face of controller for easy cover removal, ventilation, and wire terminations. 0.5 kg maximum UL Listed, File E107041, CCN PAZX, UL 916, Energy Management Equipment; FCC Compliant to CFR47, Part 15, Subpart B, Class A Note: Except IOM and IOM UL Listed, File E107041, CCN PAZX7, CAN/CSA C22.2 No. 205, Signal Equipment; Industry Canada Compliant, ICES-003 Note: Except IOM and IOM CE Mark Johnson Controls, Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of the EMC Directive 2004/108/EC. Declared as Independently Mounted, Intended for Panel Mounting, Operating Control Type 1.B, 4kV rated impulse voltage, C ball pressure test. Note: Except IOM and IOM RCM Mark, Australia/NZ Emissions Compliant Note: Except IOM and IOM BACnet Testing Laboratories (BTL) Protocol Revision 4 Listed BACnet Application Specific Controller (B-ASC) The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these specifications, consult the local Johnson Controls office. Johnson Controls shall not be liable for damages resulting from misapplication or misuse of its products. Building Efficiency Headquarters: Milwaukee, Wisconsin, USA Branch Officies: Principal Cities World-wide Metasys and Johnson Controls are registered trademarks of Johnson Controls. All other marks herein are the marks of their respective owners. Copyright 2017 Johnson Controls. All rights reserved. Any unauthorized use or copying is strictly prohibited.