Output Current Input Current Max. capacitive Load

Transcription

1 AB4S/D Series AC/DC Power Module 4W, Industrial & Medical Safety FEATURES Fully encapsulated Plastic Case 3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals - DIN-Rail Mounting Package Dimension 74x54x9.5 mm (PCB Mounting Version) Universal Input 85-64VAC, Hz Protection Class ll Extended Operating Temp.Range -40 C to +60 C at full Load LED Indicator (Chassis Version Models) Industrial Safety to UL/cUL/IEC/EN and UL508 Medical Safety Approval to UL/cUL/IEC/EN rd Edition Over Load and Over Temperature Protection 3 Year Product Warranty The new AB4S/D series is a range of fully encapsulated AC/DC power modules. These high performance products feature an extended operating temperature range of -40 C to +80 C. Universal input voltage 85-64VAC and UL/IEC/EN safety approvals including medical safety and UL508 listing qualify these power supplies modules for applications in products with worldwide markets.emi-filter meets EN550, class B and FCC,part5, class B. The AB4S/D series power modules provide an economical solution for many space critical applications in commercial, medical and industrial electronic equipment. Model Selection Guide Model Number PCB Mounting Voltage Current Input Current Max. capacitive 5VAC, 60Hz 30VAC, 50Hz Load Efficiency (typ.) Load, 5VAC VDC ma ma(typ.) μf % AB4S0500A AB4S0900A AB4S00A AB4S500A AB4S400A AB4DA ± ± # 84 AB4D55A ±5 ± # 84 Input Specifications AC Voltage Input Range # For each output Parameter Model Min. Typ. Max. Unit VAC Input Frequency Range Hz All Models DC Voltage Input Range VDC No-Load Power Consumption W Inrush Current (Cold Start at 5 ) 5VAC A 30VAC A P

2 Specifications Parameter Conditions Min. Typ. Max. Unit Voltage Accuracy --- ± % Line Regulation --- ± % Load Regulation Single Model --- ± % Dual Models --- ± % Min.Load No minimum Load Requirement 5.0VDC Models %VPP of Vo Ripple & Noise 0-0 MHz Bandwidth Other Models %V PP of Vo Over Voltage Protection Zener diode clamp 0 % of Vo Temperature Coefficient --- ± %/ Overshoot % 85VAC, Hiccup Mode, auto-recovery Current Limitation (long term overload condition may cause damage) %Inom. Short Circuit Protection Continous General Specifications Parameter Conditions Min. Typ. Max. Unit I/O Isolation Voltage (reinforced) VACrms Leakage Current μa I/O Isolation Resistance 500 VDC MΩ Switching Frequency KHz Hold-up Time 5VAC, 60Hz ms 30VAC, 50Hz ms MTBF (calculated) MIL-HDBK-7F@5, Ground Benign 400, Hours Protection Class II According IEC/EN Safety Approvals IEC/EN , rd, XMOPP cul/ul , rd, XMOPP, UL 508 listed EMC Specifications Parameter Standards & Level Performance Conducted and radiated EMI EN550, EN550, FCC part 5 Class B ESD EN air ± 8kV, Contact ± 4kV A Radiated immunity EN V/m A Fast transient EN ±kv A Surge EN ±kv A Conducted immunity EN Vrms A PFMF EN A/M A Dips EN % 0ms A Interruptions EN >95% 5000ms B Environmental Specifications Parameter Conditions Min. Max. Temperature Range (operational) Ambient Power Derating (5V Models) Above W / Power Derating (Other Models) Above +65.W / Storage Temperature Range Over Temperature Protection Shutdown at 90 (automatic recovery at approx.67 ) Humidity (non condensing) % rel. H Cooling Free-Air convection P

3 5.0 [0.0] 46.0 [.8] 6.0 [.44] 74.0 [.9].0 [ 0.04] Notes This product is not designed for use in critical life support systems, equipment used in hazardous environment, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. Specifications typical at Ta=+5, resistive load, 5VAC, 60Hz input voltage, after warm-up time rated output current unless otherwise noted. 3 Safety approvals cover frequency Hz. 4 We recommend to protect the converter by a slow blow fuse in the input supply line. 5 Other input and output voltage may be available, please contact factory. 6 To order the module with chassis mount package, please add a suffix C (e.g. AB4S400C). 7 To order the module in chassis mount with DIN-Rail kit, please add a suffix D (e.g. AB4S400D) 8 That natural convection is about 0LFM but is not equal to still air (0 LFM). 9 Specifications are subject to change without notice. Package Specifications PCB Mounting 6.3 [0.5] 8.89 [0.35].43 [0.45] 4.4 [.63].43 [0.45] Mounting M4.0 Thread 8.89 [0.35] [0.5] 6.0 [0.4] 9.5 [0.77] 0.7 [0.03] Pin Connections Pin Single Dual AC (N) AC (N) AC (L) AC (L) 3 No Pin No Pin 4 -Vout -Vout 5 No Pin Common 6 +Vout +Vout 7 No Pin No Pin Bottom View 0.3 [0.80] 54.0 [.3] All dimensions in mm (inches) Tolerance: ±0.5 (±0.0) Pin diameter.0 ±0. (0.04±0.004) Physical Characteristics Case Size : 74.0x54.0x9.5mm (.9x.3x0.77 inches) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate Weight : 37g P3

4 3.0 [0.].0 [0.43] 5.0 [0.0] 6.8 [0.66] 3.3 [0.9] 46.0 [.8] 54.0 [.3] 5.0 [0.0] 6.8 [0.66] 3.3 [0.9] 46.0 [.8] 54.0 [.3] Package Specifications Chassis Mounting (order code suffix C) 4 x 3.5 Connections Pin Single Dual AC (N) AC (N) Indication LED Top view AC (L) AC (L) 3 NC NC 4 -Vout -Vout 5 NC Common POWER"GOOD"INDICATOR DC- ON 86.0 [3.39] 6 +Vout +Vout 7 NC NC 96.0 [3.78] NC: No Connection 76.0 [.99] 0.0 [0.39] All dimensions in mm (inches) Tolerance: ±0.5 (±0.0) Physical Characteristics Case Size : 96.0x54.0x3.3mm (3.78x.3x0.9 inches) Weight : 47g Package Specifications with DIN Rail Mounting Bracket (order code suffix D) 4 x 3.5 Indication LED Top view DC- ON POWER"GOOD"INDICATOR 86.0 [3.39] 96.0 [3.78] 76.0 [.99] 0.0 [0.39] P4

5 Physical Characteristics Case Size : 96.0x54.0x3.3mm (3.78x.3x0.9 inches) Weight : 0g DIN-Rail Mounting Bracket Part Numbering System A B 4 S Product type Family series Watt Number of s Voltage I Voltage II A Option Code AC/DC Power Module Medical application 4-4W S - Single 05-5V 00 - not applicable A - PCB Mount D - Dual 09-9V - V C - Chassis Mount - V 5-5V D - Din Rail Mount 5-5V 4-4V CONTACT: USA: Telephone: East Coast: West Coast: Fax: (978) DCDC@delta-corp.com Europe: Phone: Fax: DCDC@delta-es.com Asia & the rest of world: Telephone: ext 60~64 Fax: DCDC@delta.com.tw WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. P5