USER S MANUAL. DAS-G01 The Power of Tomorrow
|
|
- Lucy Reed
- 5 years ago
- Views:
Transcription
1 USER S MANUAL DAS-G01 The Power of Tomorrow Richmond Heights
2 USER S MANUAL DAS-G01 The Power of Tomorrow Richmond Heights 2018 Page 1
3 USER'S MANUAL TABLE OF CONTENTS Page # 1.0 GENERAL INFORMATION System Overview Technical Specifications Dimensions Wiring Diagram Installation... 6,7 & Applications FUNCTION / legend & GETTING STARTED Starting Up DAS-G Setting Page Calendar Clock Wifi RS Brightness Remote Lock USING DAS-G01 (EXAMPLES) On/Off Lighting On/Off Switching Fan Speeds Dimming Lighting Analogue Valve Control Working with different pages TROUBLSHOOTING & 22 Page 2
4 1.0 GENERAL INFORMATION Page 3
5 1.0 GENERAL INFORMATION DAS-G01 is a Capacitive 7 colorful Touch Multi Protocols Wi-Fi Smart Controller, kindly find below the system overview, technical specifications, dimensions, wiring diagram, installation, and applications. 1.1 SYSTEM OVERVIEW - 7 Capacitive touch technology LCD display - 32bit core, 8kB I cache and 8KB D cache - Support Wi-Fi / BACnet, MS/TP BACnet Protocol & MODBUS RTU Protocol - RS-485 Serial Port - Support Android App / IOS App - Support Auto Frame & Alarms - Support 10 individual schedule program (6 events per day) - Non-volatile memory: store all internal settings - 6 Universal Inputs, 6 Relay Output (13A), 4 Universal Analog Outputs - Built-in calibrated Temperature Sensor - Fully programmable system - Mobile Application (Android & IOS), Multi Langue s - Sustainable Green Building Solution & Energy Management solutions - Powerful configurable controller large equipment, small facilities, and supervising of control networks Page 4
6 1.2 TECHNICAL SPECIFICATIONS Ø Operating supply voltage: Ø Relay Power output: Ø Relay Output Current load: VAC ± 10%, 50/60 Hz VAC± 10%, 50/60 Hz <13A (resistive load) Ø Controlling temperature: 5-35 / F, 0.5 / 1 F Ø Temperature Accuracy: ± 0.5 C / 1 F Ø Humidity Accuracy: ± 3% Ø Working Environment: -5 ~50 Ø Storing Environment Temp.: -10 ~60 Ø Programming: Ø Approvals: 5-1-1/5-2/7-days Programmable CE / R & TTE / UL / BTL 1.3 DIMENSIONS v Mechanical dimensions: v Mounting holes: v Mounting: v Wiring: 193(L) X 128(W) X 88.5(T) mm Provided at the back of the cabinet Mounting on wall or in enclosure Screw-fixed 1.4 WIRING DIAGRAM 1.5 INSTALLATION Page 5
7 Align the black line at Back Box with wall surface & arrow upward. Unscrew 4 screws With the Back Box arrow upward, install 4 screws (Screws not included) at Back Box 4 corners. Unscrew 4 screws. Page 6
8 INSTALLATION Removable Terminal Block can be detached from the PCB for wire connection. Power Terminal Block will be fixed on Power PCB so it is suggested to uninstall the PCB-C (3 metal screws & 1 plastic screw to fix the PCB) After wiring on Power Terminal Block, re-install the 4 screws to fix the Power PCB. Terminal block color as below: Power Supply: Red Relay Output: Grey Universal Output: Green Universal Input: Black RS485: Blue Page 7
9 INSTALLATION Align the Front Housing assembly with Back Box to engage the Male pins with Female holder. Fasten the 4 screws at Back Box at Top and bottom side. Page 8
10 1.6 APPLICATIONS Ø Building Management System, Guest Room Management System Ø Home Automation, Lighting Control System Ø Intrusion Alarm System Ø BTU, Water, Gas & Electricity Meters Ø Façade & Landscape Lighting Control System Ø Chilled Water System Monitor & Control Ø Swimming Pools Control Ø Air Quality Control Ø Elevators & Escalators Ø Air Handling Units, Fan Coil Unit s & Package Unit s Control Ø Supply, Exhaust, Pressurization & Ventilation Fan s Ø Heating / Cooling, Irrigation, Fountain, Lifting Pumps Page 9
11 2.0 FUNCTION / LEGEND Page 10
12 2.0 FUNCTION / LEGEND # Legend # Legend # Legend 1 DAS Frame 5 Wi-Fi Icon 9 SD Card/USB Slot 2 Upper Status Bar 6 Logo Example 10 Fan Icon 3 Date 7 On/Off Light Icon 11 Valve Icon 4 Time 8 Switch Icon 12 Dimming Light Icon Page 11
13 3.0 GETTING STARTED Page 12
14 3.0 GETTING STARTED 3.1 STARTING UP DAS-G01 Before powering on the device be sure that the SD card is in the SD card slot and that it contains the desired program. Once you connect the power source to the L & N terminals the DAS-G01 will start up automatically, the DAS-G01 Logo will appear. It will take around 20 seconds in order the DASG01 to be able to retrieve the program stored in the SD Card. Once the DAS-G01 retrieved the program it is ready for operation and will start execute the preset sequence of operation. Page 13
15 3.2 SETTING PAGE For calling the setting page please press on the black status bar and hold for three seconds the system page will appear. The setting page contains the following functions: - Calendar for setting the date. - Clock for setting the time. - Wi-Fi for connecting to LAN network. - RS-485 for setting the BACnet/IP or BACnet MSTP address. (needs to be activated by EULC software) - Brightness for setting the brightness of the display. - Schedule for setting the time schedule. (needs to be activated by EULC software) - Remote Lock for setting the password of the mobile (Android / IOS) application Calendar In order to setting the date please press on the calendar icon in the setting page then the calendar page will appear. Use UP / DOWN arrows for setting the Year / Month / Day then press the Right Icon on the right down corner. Press the undo arrow icon to go back to setting page, you can use the visibility icon on the left down corner to Show / Hide the date in the status bar. Page 14
16 3.2.2 Clock In order to setting the time please press on the clock icon in the setting page then the clock page will appear. Use UP / DOWN arrows for setting the Hour / Minute then press the Right Icon on the right down corner. Press the undo arrow icon to go back to setting page, you can use the visibility icon on the left down corner to Show / Hide the time in the status bar Wi-Fi In order to connect the DAS-G01 to Wi-Fi Network please press on the Wi-Fi icon in the setting page then the Wi-Fi page will appear. The DAS will scan the available Wi-Fi networks and will list them. Please press the desired network till the color turned blue then press the Right Icon on the right down corner, after that the DAS-G01 will ask you to enter the Wi-Fi network password, you may use the visual keyboard and press done after entering the password. DAS-G01 will take DHCP IP once it is connected the network if you want to use static IP please check the static IP box. In the same page the DAS-G01 shows the device ID, IP, and MAC address. Press the undo arrow icon to go back to setting page, you may use the scan icon on the left down corner to scan for more networks. Page 15
17 3.2.4 RS-485 In order to setting BACnet/IP or BACnet MSTP address please press on the RS-485 icon in the setting page then the RS-485 page will appear. Use the virtual keyboard numbers to enter the desired address (the address range is ) then press the Right Icon on the right down corner. Note: this function should be enabled first by the programmer by using EULC software tool Brightness In order to setting the brightness of the display please press on the Brightness icon in the setting page then the Brightness page will appear. Use the slider to increase / decrease the brightness of the display then press the Right Icon on the right down corner to go back to setting page. Page 16
18 3.2.6 Remote Lock In order to setting password of the mobile (Android / IOS) application please press on the Remote Lock icon in the setting page then the Remote Lock page will appear. Enter the old password then enter the new password then using the virtual keyboard then press done. Note: for the first use no need for old press, just enter the new password. Page 17
19 4.0 USING DAS-G01 (EXAMPLES) Page 18
20 4.0 GETTING STARTED Once DAS-G01 is ON and loaded the program it will start execute the programmed sequence operation automatically, moreover it will be ready to operate manually by pressing the function (Component) icons on the display. Below are list of some examples of using DAS-G01: 4.1 ON/OFF LIGHTING In order to switch On/Off the desired light circuit please press on the light bulb icon, the icon will change to represent the status of the lighting circuit as shown below: 4.2 ON/OFF SWITCHING In order to switch On/Off the desired either electrical circuit such as light, power outlet, microwave, door contact, iron etc or scenario such as night mode, sleeping mode, master switch etc please press on the switch icon, the icon will change to represent the status of the electrical circuit/scenario as shown below: 4.3 FAN SPEEDS In order to change the AC fan speed circuit please press on the fan icon, the icon will change to represent the current speed of the AC as shown below: Page 19
21 4.4 DIMMING LIGHTING In order to Dim Up/Down the desired light circuit please press and hold on the Up/Down arrows of the dimming light icon, the light will start to dim Up/Down in 5 degrees as long as you still hold the arrows. If you want to fully On/Off the light circuit please click a short press on the Up/Down arrows. The icon will change to represent the status of the lighting circuit as shown below: 4.5 ANALOGUE VALVE CONTROL In order to control Up/Down the desired AC valve actuator please press and hold on the Up/Down arrows of the valve icon, the valve will start to Open/Close in 5 degrees as long as you still hold the arrows. If you want to fully Open/Close the AC valve actuator please click a short press on the Up/Down arrows. The icon will change to represent the status of AC valve actuator as shown below: 4.6 WORKING WITH DIFFERENT PAGES If the program of DAS-G01 has more than one page, you can easily navigate among the different pages by pressing the preset icons / logos / images. Page 20
22 5.0 TROUBLESHOOTING Page 21
23 5.0 TROUBLE SHOOTING # Trouble Potential Reason 1 DAS-G01 doesn t start-up Please be sure that the power source is connected to terminals L & N 2 DAS-G01 started-up and only showing DAS-G01 logo 3 The relay output is working but the light is still OFF 4 DAS-G01 touch screed is not responding Please make sure that the SD card is in the SD card slot Please make sure that the SD card has the two folders (DAS-G01 and SYS) Please make sure that the circuit breaker of the light is ON and the line connected to the digital output terminal and has power Please make sure that the SD card is not removed from the SD card slot Restart DAS-G01 Page 22
Richmond Heights. Smart Wi-Fi Capacitive Touch With Dual Protocols Universal Controller. Go Green
Richmond Heights Smart Wi-Fi Capacitive Touch With Dual Protocols Universal Controller Presentation Agenda 1. Introduction To Richmond Heights 2. Smart Universal Controller Features Of DAS-G01 3. DAS-G01
More informationclarity 3 Programmable Controller
clarity 3 Programmable Controller BACnet General Purpose Controllers (B-AAC) DESCRIPTION Taco Clarity 3 FPC series controllers are designed to control building systems and HVAC equipment. The integrated
More informationTstat8. Bacnet Thermostat
Tstat8 Bacnet Thermostat This full-featured thermostat is designed for cooling and heating systems in residential and commercial buildings. The thermostat can be configured for use with air handlers, fan
More informationAndover ContinuumTM. b3850 Series Terminal Controllers
TM b3850 Series Terminal Controllers The TM b3850 series controllers are native BACnet controllers that communicate on an RS-485 field bus as Master devices using the MS/TP BACnet protocol. 02 Features
More informationMaster Panel. Specifications. Document No. TS-2010 February 15, Product Description. Sample Specification
SCC Inc. Master Panel Product Description February 15, 2017 The Master Panel shall provide lead/lag control and time based, automatic rotation of up to eight (8) boilers, when used in conjunction with
More informationRCF-230CAD. Communicating room controller for fan-coil applications with two analogue V DC outputs
revision 01 2015 RCF-230CAD Communicating room controller for fan-coil applications with two analogue 0...10 V DC outputs RCF-230CAD intended to control heating and/or cooling in 2- or 4-pipe installations.
More informationRCF-230CD. Communicating room thermostat for fan-coil applications with on/off outputs
revision 11 2013 RCF-230CD Communicating room thermostat for fan-coil applications with on/off outputs RCF-230CD intended to control heating and/or cooling in 2- or 4-pipe installations. Setpoint and fan
More informationAIR HANDLING UNIT CONTROLS
AIR HANDLING UNIT CONTROLS STAND ALONE / INDEPENDENT OPERATION BMS INTERFACE (BACnet - B/IP, ETHERNET, MS/TP AND PTP MODBUS) Standalone Panels: CONTROLS OVERVIEW On a standalone panel, a touch screen display
More informationOP10. Pre-programmed, configurable controller for simple applications
revision 10 2013 OP10 Pre-programmed, configurable controller for simple applications The Optigo OP10 range of controllers can be set to handle everything from temperature or humidity control to control
More informationRCF-230CAD. Room controller with communication for fancoil applications with two analogue V DC outputs
revision 04 2016 RCF-230CAD Room controller with communication for fancoil applications with two analogue 0...10 V DC outputs Intended to control heating and/or cooling in 2- or 4-pipe installations. Setpoint
More informationVAT series controller and transmitter. Manual
VAT series controller and transmitter Manual 1. General describe.. 2. Notice for use.. 1 1 3. Panel & connection introduce.. 2 4. Operate introduce.. 5. Application introduce. 6. Communication. 7. Specification..
More informationClimatix Sales Presentation. Kurt Steiner / xxx-x-xxx
Climatix Sales Presentation Siemens Switzerland Ltd 2010 Introduction Climatix HVAC market trends Siemens answer Climatix TM Range Overview Climatix 600 System Topologies and Components Applications and
More informationUC102 basic version with display and knob UC102BL version with display, knob and backlight UC102DK version without knob and display
UC102 Communicative heating controller Summary UC102 is a communicative room heating controller with two inputs and one PWM output for control of a radiator or electrical heater. It can work autonomously,
More informationBACnet. b3810 Series Local Controllers
BACnet b380 Series Local Controllers The Andover Continuum TM b380 series controllers are designed for control of Air Handling Units, Roof Top Units, and other mechanical plant equipment. 0 Features Choose
More informationNetworkable Dual Duct VAV Controller Specification and Installation Instructions
Controller Models EVCBM14NIT2S (Master controller / 2 TRIACs) EVCS14N (Slave controller) TRL Series Thermostat TRL24 (Room Sensor: Temp) TRLH24 (Room Sensor: Temp and %RH) TRLG24 (Room Sensor: Temp and
More informationControl systems. Efficient room control
Control systems Efficient room control AIRCONTROL Efficient room control with X-AIRCONTROL Humidity Occupancy Increasingly demanding requirements on energy efficiency as well as the latest EU regulations
More informationAirTouch 2 Zone Control System
AirTouch 2 Zone Control System User Manual www.polyaire.com.au 2016 Polyaire Pty Ltd Liability Please read the instructions before installing this Zonemaster Zoning Control System. Polyaire Pty Ltd does
More informationDWYER INSTRUMENTS, INC. Series AVUL Air Velocity Transmitter. Specifications - Installation and Operating Instructions.
Series AVUL Air Velocity Transmitter Specifications - Installation and Operating Instructions Bulletin P-AVUL 3-49/64 [95.71] 2-43/64 [67.92] 1/2 NPS 3-3/16 [80.81] 1-19/32 [40.59] 31/32 24.58 3-33/64
More informationField selectable application type and room module series, via dip-switches on controller
TUC03 Plus Configurable Terminal Unit Controller Product bulletin The TUC03 Plus configurable Terminal Unit Controller is specifically designed to provide an improved BACnet integration. It allows the
More informationViconics VT76x6W Water-source Heat Pump Controllers Engineering Guide Specification
Viconics VT76x6W Water-source Heat Pump Controllers Engineering Guide Specification General The VT76xxW series is designed for single-stage and multi-stage control of water source heat pumps with dedicated
More informationZIPATILE. Quick Start Guide v.1.1
ZIPATILE Quick Start Guide v.1.1 8 screen HD camera 1.0 INSTALLATION Thank you for purchasing ZipaTile. ZipaTile is the complete home control and automation system in a form of a single device. It can
More informationSCC Inc. TS Series. Technical Instructions. Document No. TS-2000 March 15, 2016
SCC Inc. TS-MS Master Lead/Lag Panels for Boiler Management, and Building Management System Interface Technical Instructions March 15, 2016 Description A TS-MS Series Master Lead/Lag Panel sequences and
More informationPRO-HC IRRIGATION CONTROLLER
PRO-HC IRRIGATION CONTROLLER Hydrawise Ready Quick Start Guide hunterindustries.com TABLE OF CONTENTS Installation 3 Connecting AC Power 5 Connecting Station Wires 7 Connecting Sensors or Flow Meters 8
More informationCONTENTS CONTROLLERS room controllers room units control units PRODUAL 3 CATALOGUE
Catalogue 207 CONTENTS CONTROLLERS... 4 room controllers... 5 room units... 29 control units... 24 PRODUAL 3 CATALOGUE T U R KU I C T C ON T R OL L E R S Multifunctional controllers for optimal performance
More informationHotel Room Controller
Full Service & Luxury Guest Room Management Solutions Delivering exceptional guest satisfaction while optimizing energy and operational efficiency Product at a Glance The (HRC) is at the heart of our Full
More informationOperation Manual SuperDry Data Logger (SDDL)
Operation Manual SuperDry Data Logger (SDDL) 1. Description This device has been equipped with custom-programmable logic module, mounted in it s own housing. The respective module serves to measure the
More informationRTD-NET Installation Instructions
LED3 SW1 LED4 RTD-NET Installation Instructions 0V +V POWER 15-24VDC English RTD-NET Installation Instructions 100.00 RTD-NET Control Interface realtime Control Systems REMC P1 P2 RS485 D-BUS DB DA GND
More informationSNAP-IT-1U Installation Guide
Chapter 1 SNAP-IT-1U Installation Guide Introduction The SNAP-IT rack-mount unit is a packaged solution for attaching electrical, electronic, and mechanical devices to an Ethernet network. Once attached
More informationSuitable for a wide range of installations with wall-mount, flush-mount and hand-held remote control options.
TUC03 Configurable Terminal Unit Controller Product Bulletin The TUC03 Configurable Terminal Unit Controller is designed specifically to provide direct digital control of terminal unit applications with
More informationOutput Signal Active Note DC V. Electrical Data Power Supply DC V, ±10%, 1.4 W
Differential Pressure Sensor (Air) Differential pressure transmitter with 8 selectable ranges 0 to 5/10 V, 4 to 20 ma outputs and Modbus functionality. NEMA 4X / IP65 rated enclosure. For monitoring the
More informationControllers / Automation Stations U-DDC
Controllers / Automation Stations U-DDC Andivi U-DDC KNX 1.0 is a freely programmable Automation Station / DDC controller supporting KNX and Modbus. It can be used to control residential and non-residential
More informationHTM F. General Description. Features
Controls by Monodraught HTM F General Description The Smart Screen Controller is a high quality interface that provides a graphical insight into the operation of Monodraught ventilation systems. Through
More informationBACnet Product Overview
BACnet Product Overview Comfort and energy-saving of a HVAC system are all about control. With networking devices, you can monitor and control your equipment via a communication system anywhere and anytime
More informationTracer Controls. Tracer MP501 Controller BAS-PRC008-EN. January 2005
Tracer Controls Tracer MP501 Controller January 2005 BAS-PRC008-EN Introduction The Tracer MP501 controller is a configurable, multi-purpose controller used to provide direct-digital control for heating,
More informationTALON Network Manager- 2 & 6 Express
Technical Specification Sheet October 30, 2010 TALON Network Manager- 2 & 6 Express Description The TALON Network Manager-2 & 6 Express (TNM-2 XPR and TNM-6 XPR) is an embedded controller/server platform
More informationZIPATILE. Quick Start Guide v.1.3
ZIPATILE Quick Start Guide v.1.3 8 screen SD card HD camera 1.0 INSTALLATION Thank you for purchasing ZipaTile. ZipaTile is the complete home control and automation system in a form of a single device.
More informationControl system. Type FSL-CONTROL II. Modular, stand-alone room control system, specially for decentralised ventilation systems (with bus communication
X X testregistrierung Control system Type Central BMS interface DCP-FSL II-Stand-alone Pressure independent control valve Straight-way valve Modular, stand-alone room control system, specially for decentralised
More informationRTD-W Installation Instructions
RTD-W Installation Instructions 0V +V POWER 15-24VDC 0V S1 S2 S3 0V S4 S5 S6 English RTD-W Installation Instructions 100.00 RTD-W Control Interface realtime Control Systems 24VAC/30VDC, 1A REMC P1 P2 RS485
More informationFeatures and Benefits of XeteX Controls. Other Unit Control Functions. Energy Recovery Functions
Controls Guide for XeteX Units Beyond meeting the typical specification and performance requirements, controlling the equipment is usually the most important success factor for HVAC projects. XeteX provides
More informationMANUAL INSTALLATION. Multi-Variable Monitor. MVM Series. Issue Date: 02/07/ Price Industries Limited. All rights reserved.
MANUAL INSTALLATION Multi-Variable Monitor MVM Series Issue Date: 02/07/18 2018 Price Industries Limited. All rights reserved. TABLE OF CONTENTS Product Overview General...1 MVM Specifications...1 Included
More informationPMX 2.5/10 - Combined High Quality Indoor/Outdoor Monitor
2.5/10 - Combined High Quality 2.5/10 - Wall 2.5/10 - Duct Features Accuracy : Laser scatter method, particles are sized with a resolution of 0.3 μm User defined sampling period prolongs sensor life Fast
More informationSPECIFICATIONS Temperature Setting Range: Ambient Temperature Humidity Display Range: Screen lock & configuration password:
1 FEATURES 5-inch touch & color screen Humanized operator interface Two kinds of display style Schedule setting in simple way Control your device with your cell-phone Compressor protection 12 wiring connections
More informationCONTROLS.COM. Bacnet and Modbus Modules. T3-22i. T3000 Building Automation System Overview. T3-8o. Ethernet MAIN NET1 RS485 SUBNET2 RS485.
TEMCO CONTROLS.COM Bacnet and Modbus Modules T3-22i T3000 Building Automation System Overview Building Operator T3-8o Ethernet Internet T3-BB T3-LB T3-TB T3-8o T3-22i Remote User MAIN NET1 RS485 TSTAT8
More informationOperation Guide CT32 ENGLISH
Operation Guide CT32 The CT32 communicating thermostat operates via a high-quality, easy-to-use touch screen. To set or adjust your CT32, simply touch your finger firmly to the screen. The screen will
More informationBACnet. b3867 Terminal Controllers
BACnet b3867 Terminal Controllers The Andover Continuum TM b3867 is a native BACnet controller that communicates on an RS-485 field bus as a Master device using the MS/TP BACnet protocol. 02 Features Product
More informationInstallation manual CF8-W-Disp-AL
Installation manual CF8-W-Disp-AL CO 2 transmitter with two relays mounted in industrial housing prepared for Modbus communication protocol 4 7 8 8 6 3 2 5 Wall plate 5 Snap-in lid 2 PCB (Factory supplied
More informationEvolution TH. Pre-configured controller with display, clock and communication. Evolution. Applications. TH version. Sensors
Pre-configured controller with display, clock and communication Room controller for thermoregulation applications, equipped with rapid access buttons for the most common functions. Communication via RS485
More informationInterface I-300 / I-300 Pro Technical data sheet
Interface I-300 / I-300 Pro Technical data sheet The Interface I-300 or I-300 Pro are the central control unit for all process parameters of a Rotavapor R-300 system: rotation speed, temperature (heating
More informationMulti-Function Smart Indicator User Manual
Multi-Function Smart Indicator User Manual EC30006 Content 1 Notice... 2 2 Specification... 2 3 Main parameter... 3 4 How to fix... 3 5 Port... 4 6 On/Off... 4 7 Charging... 4 8 Display... 5 9 Screen keypad...
More informationMiG2 CONTROLLERS. 2 & 4 Stage General Purpose Controllers, with Air-conditioning Facilities
MiG2 CONTROLLERS 2 & 4 Stage General Purpose Controllers, with Air-conditioning Facilities The MiG2 controllers incorporate: 2 Inputs (Configurable as Resistive, 0 10V, 0 20mA or 4 20mA) 2 or 4 Relay Outputs
More informationRemoval and Installation8
8 Screw Types 8-4 Top Cover Assembly 8-5 Left Hand Cover 8-6 Right Hand Cover 8-10 Front Panel Assembly 8-14 Left Rear Cover 8-15 Right Rear Cover 8-16 Extension Cover (60" Model only) 8-17 Media Lever
More informationNF760 Batch Controller
NF760 Batch Controller Overview The NF760 Batch Controller is suited to flow applications where precise measurement and control of batch quantities is required. Batch total, flow rate, accumulated total
More informationProduct Catalog. Tracer Controller MP501 BAS-PRC008-EN. May 2012
Product Catalog Tracer Controller MP501 May 2012 BAS-PRC008-EN Copyright 2012 Trane. All rights reserved. This document and the information in it are the property of Trane and may not be used or reproduced
More informationINTRINSICALLY SAFE INSTRUMENTATION FOR HAZARDOUS AREAS
INTRINSICALLY SAFE INSTRUMENTATION FOR HAZARDOUS AREAS SHORT FORM 2002 SERIES D1000 Intrinsically Safe Galvanic Isolators SERIES D1000, for DIN Rail Mounting, provide the most simple and cost effective
More informationUser Guide. For controller on CXAO / RTXB heat pumps CGCM / CXCM 2 circuit units. CNT-SVU005C-GB Original instructions
User Guide For controller on CXAO / RTXB heat pumps CGCM / CXCM 2 circuit units CNT-SVU005C-GB Original instructions Table of contents Advanced electronics... 3 Technical Specifications... 4 Display description...
More informationSupplementary operating instructions for your air curtain system Controller TMC 500
Supplementary operating instructions for your air curtain system Controller TMC 500 (Translation of the original) Serial number: Year: Please quote this number when contacting customer service! Date 08.04.2016
More informationThe IC can be used in new installations or as a replacement for an existing sprinkler control system.
1 Introduction 1 Introduction The IrrigationCaddy IC-W1 (IC) is a WiFi enabled irrigation controller. The IC allows the user to control and schedule an irrigation system from any computer with a web browser.
More information1. Introduction P Package Contents 1.
1 Contents 1. Introduction ------------------------------------------------------------------------------- P. 3-5 1.1 Package Contents 1.2 Tablet Overview 2. Using the Tablet for the first time ---------------------------------------------------
More informationInterface I-300 / I-300 Pro Technical data sheet
Interface I-300 / I-300 Pro Technical data sheet The Interface I-300 or I-300 Pro are the central control unit for all process parameters of a Rotavapor R-300 system: rotation speed, temperature (heating
More informationUser Guide. Multipipe Units CMAA / RTMA CNT-SVU004B-GB
User Guide Multipipe Units CMAA / RTMA CNT-SVU004B-GB USER GUIDE WARNING Supply the unit at least 24 hours before the initial startup to heat the compressor oil. In conditions of low water temperature,
More informationSee instructions to download and install the latest version of LinkBoxMB and the user's manual at
Safety Instructions WARNING Follow carefully this safety and installation instructions. Improper work may lead to serious harmful for your health and also may damage seriously the IntesisBox and/or any
More informationAndover ContinuumTM b3865/866 VAV Controllers with Built-in Actuator
Andover ContinuumTM b3865/866 VAV Controllers The Andover Continuum TM b3865 and b3866 are native BACnet controllers that communicate on an RS-485 field bus as Master devices using the MS/TP BACnet protocol.
More informationINSTALLATION MANUAL for the Application ihc-mirf
INSTALLATION MANUAL for the Application ihc-mirf Contents Introduction 3 Installing the application on a mobile phone 3 Settings 4 Control 12 Introduction The applications ihc-mirf (for mobile phones with
More informationVC3000 Series Line Voltage Switching Relay Pack Controllers Installation Guide
Beyond Comfort VC3000 Series Line Voltage Switching Relay Pack Controllers Installation Guide August 10 th, 2010 (For Commercial and Lodging HVAC Fan Coil Applications) 028-0296-R1-LIT-VC3000-E01 Index
More informationInstallation Manual. Balboa Bluetooth Audio bba 2
Installation Manual Balboa Bluetooth Audio bba 2 WARNING There are no user serviceable parts inside the system pack. All connections must be made by a qualified electrician in accordance with the country
More informationUser Manual. cmt-iv5 Startup Guide
User Manual cmt-iv5 Startup Guide v 2.2 JAN 8, 2016 Table of Contents Chapter1. Overview... 1 1.1. Specification... 1 1.2. Dimensions... 2 1.3. Ethernet port... 3 1.4. CR1225 battery... 3 1.5. Power connection...
More informationFTM84/85 Feature Application. Temperature & Humidity / Flow Measuring Specialist
FTM84/85 Feature Application IP65 protection degree, rugged aluminum case, fit in variety harsh environment Capable of temperature compensation Llinear adjustment air velocity by computer, analogue output
More informationRoom controller STRA-17
Room controller STRA-17 Application example Room 2 Room 3 Room 4 SCADA EXOline alt. RS485 Modbus Transformer STRZ-24 (Required component) STRA-17 is a preprogrammed room controller intended to control
More informationMOD-RI Room Interface Modules with Modbus
Product sheet MOD3.00 Type MOD-RI MOD-RI Room Interface Modules with Modbus The MOD-RI are room interface modules designed to provide room control interface for the building management systems. The MOD-RI
More informationRAIN BIRD RC-4Bi, RC-7Bi, RC-1260Bi SERIES INSTRUCTION MANUAL
RAIN BIRD RC-4Bi, RC-7Bi, RC-1260Bi SERIES INSTRUCTION MANUAL DESCRIPTION OF CONTROLS Refer to Figure 1 Figure 1 A. HOUR DIAL with 23 CYCLE START PINS The HOUR dial contains 23 pins for rescheduling automatic
More informationFeatures BACnet/IP over Wi-Fi, BACnet MS/TP, Delta LINKnet communication. EnOcean wireless for zone-level control, including sensors and outputs
Wireless BACnet Thermostat: ezntw Description The ezntw is a fully programmable thermostat equipped with EnOcean wireless connectivity and onboard Wi-Fi option. Featuring a standard temperature sensor
More informationGarage Door Control Button. What s inside: Quickstart Guide Model No. WGO x Garage Door Control Button
Add-On Device Quickstart Guide 1 Garage Door Control Button Quickstart Guide Model No. WGO2001 What s inside: 1x Garage Door Control Button 1x Power Adapter 2x U-fork Wires Mounting Accessories and Double-sided
More informationNeon pr. ph/ ORP measurement. Applications. Description
Easy handling by graphical menue Fitting for your application by modular setup Simple firmware update and configuration using SD-card Applications Process Water Drinking Water / Beverages Waste Water Treatment
More informationV0STAT51P-2 Programmable Wired Controller
PRODUCT SPECIFICATIONS VARIABLE REFRIGERANT FLOW SYSTEMS VRF V0STAT51P-2 Programmable Wired Controller Bulletin No. 210766 March 2016 Grouping - Controller can control up to 16 indoor units on the same
More information42 Stretched Outdoor Double-Sided Transit VMS, Landscape, 4 ft x 1 ft
NIADM-4949LC-SEA 42 Stretched Outdoor Double-Sided Transit VMS Specification 42 Stretched Outdoor Double-Sided Transit VMS, Landscape, 4 ft x 1 ft Model: NIADM-4949LC-SEA, Landscape, Double-Sided Tamper-proof
More informationHi-Res 8 Wi-Fi Digital Picture Frame with MP3 player Table of Contents
Hi-Res 8 Wi-Fi Digital Picture Frame with MP3 player Table of Contents Before Using the Digital Picture Frame...3 Introduction...3 Features and Specs...3 Package contents...4 Digital Picture Frame Layout...5
More informationAndover ContinuumTM Infinet II
Andover ContinuumTM Infinet II The i80 Series controllers are designed for control of Air Handling Units, Roof Top Units, and other mechanical plant equipment. Features 0 Choose the i80 model with the
More informationWeb server. Simplified.
Web-Enabled Controller Web server. Simplified. Publish your building automation system to the Web quickly and easily with the Reliable Controls. The first 3-in-1 device of its kind, the combines a BTLlisted
More informationBuilt-in features Built-in simplicity Built for fans & pumps
GE Built-in features Built-in simplicity Built for fans & pumps AF-600 FP Fan & Pump Drives imagination at work Built for variable torque Specifically designed for fan and pump applications, the AF-600
More informationEXOcompact. Third generation freely programmable controllers
revision 1 013 EXOcompact Third generation freely programmable controllers Small, compact controller with different types of communication, with or without built-in display. EXOcompact can be used either
More informationSpecification Sheet For electronically commutated motors
SC-VAV-N Specification Sheet For electronically commutated motors Used in constant pressure applications The SC-EFC is designed to control exhaust air in various building applications. The system includes
More informationSee instructions to download and install the latest version of LinkBoxMB and the user's manual at
Safety Instructions WARNING Follow carefully this safety and installation instructions. Improper work may lead to serious harmful for your health and also may damage seriously the IntesisBox and/or any
More informationSafety Instructions WARNING Follow carefully this safety and installation instructions. Improper work may lead to serious harmful for your health and also may damage seriously the IntesisBox and/or any
More informationZONETOUCH DAMPER CONTROL SYSTEM Operation Manual
ZONETOUCH DAMPER CONTROL SYSTEM Operation Manual www.zonemaster.com.au www.polyaire.com.au 2012 Polyaire Pty Ltd TABLE OF CONTENTS 1) Features 2 2) Wall Controller Layout (Touchpad) 2 3) Manual On/Off
More informationDMT340 Series Dewpoint and Temperature Transmitters for Very Dry Conditions
www.vaisala.com DMT340 Series Dewpoint and Temperature Transmitters for Very Dry Conditions The display shows measurement trends, real-time data, and measurement history. Features/Benefits Measures dew
More informationFX 2 Instruction Manual
FX 2 Instruction Manual Climma Compact Version Annapolis MD USA 301 352 6962 info@veco-na.com Introduction: The FX2-DX digital controller operates onboard air conditioning equipment to provide room temperature
More informationIntesisBox. v.0.1. User Manual Issue Date: 12/2017 r1.3 EN
IntesisBox HS-RC-MBS-1 v.0.1 Modbus RTU (EIA-485) Interface for Hisense air conditioners. Compatible with commercial line of air conditioners commercialized by Hisense. User Manual Issue Date: 12/2017
More informationEfficient. Innovative. Sustainable.
Efficient. Innovative. Sustainable. Controlesta RCO System Description On-line, at each time, at each place 1 CONTROLESTA RCO System Description 1. System architecture 2.1 Master Controller 2.2 Network
More informationTECHNICAL REFERENCE MANUAL FOR CAREL CONTROLLERS
TECHNICAL REFERENCE MANUAL FOR CONTROLLERS IOM-02 April 2017 Contents Page FUNCTIONAL LAYOUT... 1 pco5+ DESIGN... 2 SERIAL PORTS... 3 MOUNTING, DIMENSIONS & INSTALLATION... 4 Installation... 5 Environmental
More informationAirTouch 3 Zone Control System
airtouch AirTouch 3 Zone Control System User Manual airtouch.net.au 2017 Polyaire Pty Ltd Liability Please read the instructions before installing this Zone Control System. Polyaire Pty Ltd does not accept
More informationInstallation Guide DEVIlink CC Central Controller
DEVIlink CC Central Controller www.devi.com Table of Contents 1 Introduction.................................... 4 2 Guidelines for installation....................... 5 3 Installation plan.................................
More informationGateway for integration of Modbus RTU slave devices into BACnet IP based systems.
IntesisBox BACnet/IP Server - RTU master Gateway for integration of RTU devices into based systems Integrate any RTU device into your BACnet control system Ethernet RS485 (can be also RS232 for single
More informationclarity 3 VAV Programmable Controller
clarity 3 VAV Programmable Controller BACnet VAV Controller-Actuators (B-AAC) DESCRIPTION Taco Clarity3 series controller-actuators are designed to operate VAV (Variable Air Volume) terminal units. The
More informationPM2.5 Particle Counter
Description The PM2.5/10 Particle Counter is designed for environmental monitoring in industrial, commercial and institutional buildings. The unit provides accurate readings of particle counts in two important
More informationEL7060 Series SERVICE MANUAL
EL7060 Series SERVICE MANUAL 1 TABLE OF CONTENTS 1 General description... 4 1.1 Exploded view... 5 2 ACCESSIBILITY... 5 2.1 Dust Bag Cover.. 7 2.2 Display Cover.8 2.3 PCB Display/Switch..9 2.4 Top Cover..10
More informationSERIES 4600 Ethernet Visual-Pager Display INSTALLATION and SPECIFICATION GUIDE. Manual No. D Revision Date: 08/2016 Control: 1.
SERIES 4600 Ethernet Visual-Pager Display INSTALLATION and SPECIFICATION GUIDE Manual No. D4600-7010 Revision Date: 08/2016 Control: 1.0 Microframe Corporation 604 South 12th Street Local: 918-258-4839
More informationSUPERVISION AND CONTROL FOR HYDRONIC TERMINAL UNITS
SUPERVISION AND CONTROL FOR HYDRONIC TERMINAL UNITS Smart design LCD display Humidity sensor Plug & Play connections Weekly and daily programs Flexible configuration Service tool available MODBUS RTU:
More informationOptions Overview. February 6, Ben Newell
Options Overview February 6, 2018 Ben Newell CERV2 Configuration Unitary All-in-One System Heat pump and dampers Fans same ECM fans as current CERV Fresh air and return filters (nom. 10 x20 ) Integrated
More informationBACnet Controller for General-purpose Building Applications
Specifications BACnet Controller for General-purpose Building Applications General Model WJ-1101 is the BACnet controller to be used for a wide range of building applications such as air-conditioning and
More informationNow available to pre-order from Distech Controls
In this release: A Leading Solution for Your Internet of Things Building 3 ECLYPSE Connected Equipment Controllers (ECY-303 Series) 5 Supporting Software for ECLYPSE Connected Equipment Controllers (ECY-303
More information