SKIVING MACHINE MAINTENANCE & INSTRUCTIONS MANUAL ASSK2. Allswage UK. Roebuck Street, West Bromwich, B70 6RB
|
|
- Ilene Stanley
- 5 years ago
- Views:
Transcription
1 SKIVING MACHINE ASSK2 MAINTENANCE & INSTRUCTIONS MANUAL
2 A. WARRANTY AND RESPONSIBILITY Warranty: It's the supplier's responsibility to guarantee the conformity of the product, assuring that it's manufactured without fault and that it meets the agreement settlements between both parts. The warranty is valid for one year, beginning at the date of the sale document. In this warranty are included all the pieces or parts of the components that may come to need replacement. Within the warranty period the supplier is responsible for any lack of conformity found on the equipment, as long as they are reported by written, within a maximum of 8 days from the delivery of the equipment. Where it concerns to lack of conformity duly verified, the manufacturer undertakes the responsibility to, within a reasonable period of time, to repair or replace the components, or parts of these, that are proven to not be within normal standards. The return of defective goods, must always be authorized in written by the supplier. Furthermore the goods need to be returned in it's original packaging. During the term of this warranty, Allswage UK will proceed to the replacement or repair of equipment - according to it's option - assuming the costs that come from it. To this end, it must be informed by the customer, within the 3 days after the malfunction started. All replaced parts are property of The warranty is void when: The products have not be correctly assembled, or used for different purposes that the intended; Have not received proper maintenance, or have been modified or repaired without the authorization of the supplier. The manufacturer is not responsible for the natural consumption of the components. Supplier's Responsibility: the supplier shall be the solely responsible for the proper functioning of the product and, for its characteristics and performances specifically stated by them. However, the manufacturer takes no responsibility as long as it's identified third party interference.
3 B. INSTRUCTIONS MANUAL PURPOSE This manual was developed by the technical department of Its purpose is to establish guidelines, concerning the assembly, installation, maintenance and functioning of the marking machine. Guidelines that are indispensable to assure and proper functioning of the machine, maintaining the safety requirements needed. The marking machine was designed and manufactured following the European Safety Standards Board. As long as it s used properly, it s function, adjustment and maintenance do not present any danger to the operators. B1. SAFETY REGULATIONS DO NOT USE the equipment without reading this manual and UNDERSTANDING ITS CONTENTS. CAUTION! The misuse of this equipment can cause injury. The operator shall never be in contact with the moving pieces or work within their reach. CAUTION! It's absolutely essential that the work operations are performed by one single operator. The owner needs to make sure that the manual is kept in an appropriate manner and that the operator understands the whole content of the manual, along with his/her responsibilities.
4 Shields, protections and safety guards should never be removed. Check if the pressure corresponds to the one mentioned on the characteristics of the equipment. Make sure skiving is always done under safe conditions. Never put your hands in the skiving area while the machine is working. Keep a minimal distance of 200mm between your hands and moving parts. Use gloves and appropriate protective gear. While working, always follow the instructions shown in the machine labels. Always turn the power source off during maintenances that should be done by specialized personal. The skiving machine should only be operated by qualified adults. The moving parts must be kept clean and well lubricated. Original replacement parts must be used in order to maintain it's original characteristics and it's certification and warranty. Keep the power tube away from the work area and make sure that it doesn't make the operations difficult. Our equipment is designed according to the safety technical characteristics in accordance with the EC normative. The operators are advised to follow strictly the instructions supplied in this manual.
5 C. TRANSPORTATION Transportation and work place: Although the machine is easily located, ensure the machine is safely moved and intact. Ensure the machine is placed on a solid, level surface. Always work under safety conditions and with the necessary space around the machine. The Manufacturer is not liable for any damages caused by negligence. Production waste: The production waste is compared to solid waste and can be disposed without difficulty. If the machine is installed in countries where there are specific rules, production waste should be disposed of according to local regulations in force.
6 D. EQUIPMENT CHARACTERISTICS TECHNICAL FILE/DIMENSIONS SKIVING SKM100 SINGLE PHASE SKIVING SKM100 THREE-PHASE SKIVING CAPACITY Internal 1/4>2" External 3/4>2" Internal 1/4>2" External 3/4>2" ENGINE POWER 0.75KW 0.75KW RPM 2 ways 275RPM 2 ways 275RPM DIMENSIONS 804.5mmX560mmX411mm 804.5mmX560mmX411mm VOLTAGE 220V 50-60HZ 230V 400V 50HZ CONTROLS ELECTRICAL ELECTRICAL WEIGHT 46KG 46KG SOUND LEVEL 60dBA 60dBA SAFETY INTERRUPTOR INCLUDED INCLUDED
7 E. MACHINE INSTRUCTIONS Picture 1 Skiving Machine E1. MACHINE DESCRIPTION & PROTECTION SYSTEMS This machine was designed for Hydraulic hose skiving. The machine consists in a rotating blade connected to an electric geared engine, which is used for stripping hydraulic pipes internally and externally. For each situation different tools are used. The equipment was designed with a protection to avoid it from tossing rubber or steel to the operator. This protection is prepared with a sensor that detects any movement and turns off. The start system by pedal allows the machine to work without having to use hands which will in turn avoid having them near the blade.
8 E2. THREE PHASE ELECTRIC SCHEME
9 F. WORKING INSTRUCTIONS F1. FUNCTIONS OF THE CONTROLS Picture 2 Control Devices Not all the machines commands are at the frontal panel. Besides the frontal panel commands there is also the foot pedal. 1 ON/OFF BUTTON 2 START BUTTON 3 REVERSE BUTTON 4 EMERGENCY BUTTON 5 ON SIGNAL LIGHT 6 FOOT PEDAL
10 F2. HOW TO TURN ON THE MACHINE The skiving machine has an easy to understand control panel where turning on, reversing the direction or turning office the machine can be easily performed. Note: Before start using the machine check if: The machine power cord is plugged The emergency button is unlocked The used tool is the correct for the wanted operation The protection is well in place F3. TURN ON THE MACHINE Rotate the on/off button (1) (right, position 1) and pressing the start button (2) the on signal light (5) will turn on. Afterwards, chose the rotation direction by rotating the reverse button (3) (left/counter clockwise, right/clockwise). The machine will then be ready to work. The foot pedal is the last command to use in order to operate the machine. It should only be used after checking if all the above mentioned actions have been duly taken. F4. SAFETY If any safety mechanism is activated (emergency button or safety sensor) the foot pedal is deactivated, forcing to press again the Start button in order to restart the skiving operation.
11 F5. TURNING OFF THE MACHINE After making all skiving operations rotate the on/off button (1) (left, position 0). AFTER EACH USE, TURN OFF THE SKIVING MACHINE TO AVOID ENERGY WASTE. F6. CUTTING TOOLS Picture 3 External Skiving Set F6A. REPLACE THE GUIDE IRON Loosen the knob (9) until the guide tool comes (8) out. Choose the most adequate tool for the hose on which you wish to perform the skiving. All the tools (8) are duly marked with the hose dimensions. F6B. EXTERNAL TOOL The external tool comprises two parts. One is for guiding the hose (8) and the other is for skiving (7) externally.
12 F6C. INTERNAL TOOL Picture 4 Internal Skiving Set The internal tool has two pieces that are coupled to each other. This tool, apart from guiding the hose (12) also has coupled the skiving tool (13). The internal tool (12) has coupled the following parts: Skiving tool (13) The pin (14) to adjust the skiving tool The stopper (16) of the tube to narrow the depth. The pin (15) for fixing the stopper to the wanted position. Choose the most adequate tool for the hose on which you wish to perform the skiving. All the tools (12) are duly marked with the hose dimensions.
13 F7. ADJUSTING & TUNING F7A. EXTERNAL SKIVING To adjust the skiving the following steps need to be taken: 1 - Lift the protection 2 - Turn it to the desired direction (Right is up and left is down) (knob 10) 3 - Low Protection 4 - Push start (2) 5 - Chose the rotation direction (3) 6 - Push the foot pedal (6) F7B. INTERNAL SKIVING To adjust the skiving the following steps need to be taken: 1. Lift the protection 2. Loosen the pin (14 and 15) 3. Adjust the cutting tool (up or down) (10) 4. Tighten the pin (14) 5. Adjust the wheel that servers as a stopper (16) 6. Tighten the pin (15) 7. Low Protection 8. Push start (2) 9. Chose the rotation direction (3) 10. Push the foot pedal (6)
14 F8. REPLACING EXTERNAL CUTTING TOOL Picture 5 External Skiving Set 1. Open the protection. 2. Loosen the four screws that hold the tool. 3. Insert the new tool. 4. Adjust the tool. 5. Tighten again the four screws. 6. The tool should be set up as shown in the picture (the rounded part of the tool always to the front) F9. REPLACE THE INTERNAL TOOL 1. Remove the complete tool from the tool holder by rotating the knob (9). 2. Loosen the pin (14). 3. Insert the new tool (rounded part always to the front). 4. Adjust the tool. 5. Tighten pin. 6. The removed tool should be placed at the tool holder.
15 F10. EMERGENCY STOP Picture 5 Emergency Stop F9. PROHIBITED WAYS OF USING THE MACHINE It's strictly forbidden to use the skiving machine for other ends besides the already mentioned above. It's forbidden to remove any of its original protection. It's strictly forbidden using this equipment without reading the work instructions. This machine can only be operated by qualified adults, and only after they have read the work instructions.
16 F5. POSSIBLE MALFUNCTIONS AND SOLUTIONS If the engine won t turn on: o o Check the fuses Check if all the cable are correctly plugged in It s not skiving: o o Check the height of the cutting tool Check the edge of the cutting tool (if the edge is worn replace the tool with a new one). F6. INSTRUCTIONS USING PROTECTION EQUIPMENT Work wear Work gloves Under no circumstances can the operator stop using the personal protection equipment mentioned above. Must always follow the basic safety principles in the installation and use of the tools listed.
17 G. INITIAL CHECK UP Place the machine on top of a stable surface which provides a great support. Make sure the power cord is equipped with a differential circuit breaker for security and overload energy cut-out. It is mandatory to connect to earth according to the methods required by safety standards of electrical installations. The manufacturer disclaims any responsibility for any damage to persons or property due to the lack of connection or faulty connection of the ground line. It's mandatory to plug the machine to the power supply. Never connect the machine directly to the electrical framework. The plug to be connected to the power cord and electrical socket should be the same type and comply with the regulations. Verify that the values of voltage and network frequency match those mentioned in the identification label. Avoid the use of adapters or derivations. Never remove the plug by pulling the power cord. After the installation the plug must be accessible. In the case of damage to the power cord, it must be replaced by a qualified technician. After replacing the power cord, make sure that the docking cradle cable is fixed properly. Make sure that the moving parts are clean and lightly lubricated. The engine does not work when the emergency switch is activated: Make sure the wall switch corresponds to the poles of the machine. Check if the wall switch fuse is burned. Never remove the machine protections. THE MANUFACTURER DISCLAIMS ANY LIABILITY FOR DAMAGE TO PERSONS OR PROPERTY, CAUSED BY THE FAILURE TO FOLLOW THE ABOVE MENTIONED REQUIREMENTS OR RESULTING FROM THE CHANGE IN EVEN IF ONLY ONE PIECE OF THE EQUIPMENT AND USE OF SPARE PARTS WHICH ARE NOT ORIGINAL.
18 H. LIGHTING The equipment does not have its own lighting and so it should be used in areas properly illuminated. If the visibility at the site is not adequate, you should use artificial lighting equipment.
19 . MAINTENANCE INSTRUCTIONS In order to assure the correct operation of the marking machine, as well as its long life, it's essential to carry out a series of maintenance activities. Where such activities are not made, the manufacturer is not liable for damage caused by the machine on their direct or indirect users. I1. MAINTENANCE INSTRUCTIONS The indicated activities must be performed by qualified personnel. The following essential maintenance activities are therefore to take place every three months: Check the tightness of all screws used; Check the levelling of the machine making the necessary adjustments; Clean inside the machine, engine and electrical boxes using compressed air (less than 2 bar) and not products that can cause adverse reactions to materials of the machine; (You must use facial protection mask, safety goggles, gloves and work clothes) Lubricate the joints and moving parts; Check the components of the skiving machine and replace those that are damaged; Check the circuit and electric components; Check the wear of the cutting tool. I3. MAINTENANCE ROUTINE Make sure that the moving parts are always lightly lubricated. Check from time to time the wear of the cutting tools. Check the levelling of the machine.
20 J. REPLACEMENT PARTS Picture 6 Replacement Parts D Picture 8 - Tools Picture 7 Picture 8 D1 - Tool Holder D2 - Protection D3 - Tool Holder D4 - Internal skiving tool D5 - External skiving tool
21 Parts M Picture 9 Replacement Parts M Picture 9 M1 - Tool Holder M5 - Safety Sensor M9 - Drawer M13 - Engine direction button M2 - Drive motor M6 - Side covers M10 - Drawer Knob M14 - Light M3 - Drive motor base M7 - Acrylic protection M11 - Machine base M15 - ON button M4 - Electrical box M8 - Hinges M12 - ON/OFF Button M16 - Mixer
22 J2. PARTS Picture 10 Replacement Parts G Picture 10 G1- Tool holder screw (internal and external skiving) G4 - Cutting door support G7 - Fastening plate G10 - Top Mounting G2 - Slot G5 - Tuning pin G8 - Cutting door G11 - Drive motor coupling G3 - Fastening pin G6 - Tuning screw G9 - Cutting blade G12 - Skiving tools
23 K. MANUFACTURER S RECOMMENDATIONS The marking machines were developed based on principles that ensure no risks to all the users of these machines as long as it's correct use is followed by respecting it's safety rules. The lack knowledge or failure of following these standards may put users and others in dangerous situations likely to cause serious harm to people and objects. It is therefore crucial to understand and respect the rules of usage, as well as performing the maintenance tasks required to ensure the correct functioning of the machines and to safeguard the security of the users. Before using, the operators must be informed about it's correct use by reading carefully the instructions manual provided with this equipment as well as knowing it's characteristics by making sure that: The machine will be exclusively installed by qualified and specialized personnel. The installation of the machine will always be performed on a smooth and stable workbench. The machine is properly installed. The light is sufficient to execute the operations securely, with no obstacles in the work area or personnel not certified. Understand well the work method as well as technical limitations. Under no circumstances, proceed to modify the structure and components of the equipment without authorization from the Manufacturer. Know and respect the available signs on the machine. Do not perform any tasks for which the machine was not designed.
Installation manual plugs and connectors with screw connection (16/32 A)
EN Installation manual plugs and connectors with screw connection (16/32 60003213 Issue 04.2016 2016-04-01 Table of contents 1 About this manual 3 1.1 Structure of the warnings 3 1.2 Symbols used 4 1.3
More informationOperating Instructions Wall saw DZ-S2
Operating Instructions Index 001 10987273 EN /25.07.2007 Congratulations! With a Hydrostress unit from TYROLIT, you have chosen a tried and tested piece of equipment which has been designed and built to
More informationMAXIMA+ Series Rotary Level Indicator
MAXIMA+ Series Rotary Level Indicator BinMaster: Division of Garner Industries 7201 N. 98th St., Lincoln, NE 68507 402-434-9102 email: info@binmaster.com www.binmaster.com OPERATING INSTRUCTIONS PLEASE
More informationFUE 10 FUE-M/S 85A FUE-M/S 86A
www.wackergroup.com 0109972en 001 02.2007 Inverter FUE 10 FUE-M/S 85A FUE-M/S 86A Operator's manual 1. Foreword Foreword For your own safety and protection from bodily injuries, carefully read, understand
More informationC-pan arm USERS INSTRUCTIONS
C-pan arm USERS INSTRUCTIONS Designed 1 of 12 and made in Denmark Thanks for purchasing a 9.Solutions product. With great passion, we design our products to be as versatile as possible. We hope that our
More informationPNEUMATIC CRIMPER PC 12-8B OPERATING MANUAL
PNEUMATIC CRIMPER PC 12-8B OPERATING MANUAL CONTENTS www.americanelectrical.com SAFETY BASIC INFORMATION... 1 SYMBOLS.1 OPERATION OF MACHINE & POSSIBLE DANGERS. 1 DESIGNATED USE. 2 DANGERS 2 PLACES FOR
More informationMAXIMA + Series ROTARY LEVEL CONTROL
Price $5.00 MAXIMA + Series ROTARY LEVEL CONTROL OPERATING INSTRUCTIONS PLEASE READ CAREFULLY Division of Garner Industries 7201 North 98th Street Lincoln, NE 68507-9741 (402) 434-9102 925-0268 Rev. A
More informationInstall Motor Controller User Manual
Property of Motion Laboratories, Inc. Install Motor Controller User Manual 2014 Motion Laboratories, Inc. Created By: Michael Shaw Approved By: John Coppolecchia Page: 1 Page: 2 2014 Motion Laboratories,
More informationGobo Projector XP 80W
Gobo Projector XP 80W User Manual Order code: EQLED084 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CARE- FULLY BEFORE YOUR INITIAL START-UP! Before your initial start-up, please
More information3M AEROSPACE & COMMERCIAL TRANSPORTATION DIVISION St. Paul, MN USA or or Made in USA
3M AEROSPACE & COMMERCIAL TRANSPORTATION DIVISION St. Paul, MN 55144-1000 USA www.3m.com/aerospace or 1-800-364-3577 or 1-800-235-2376 Made in USA with US and Globally Sourced Materials 3M 2015. All rights
More informationOPERATING INSTRUCTIONS WCU17
OPERATING INSTRUCTIONS Index 000 Translation of the original instructions 10999826 en / 05.10.2018 Congratulations! You have decided to purchase a tried-and-tested TYROLIT Hydrostress unit and have thus
More informationOperating Instructions Drill rigs DRU400 DRA400
Operating Instructions Drill rigs DRU400 DRA400 Index 001 Original operating instructions 10988838 en / 12.05.2017 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
More informationATV Single Gang Disc Harrow OWNER S MANUAL
ATV Single Gang Disc Harrow OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationRemoval and Installation8
8 Screw Types 8-4 Top Cover Assembly 8-5 Left Hand Cover 8-6 Right Hand Cover 8-10 Front Panel Assembly 8-14 Left Rear Cover 8-15 Right Rear Cover 8-16 Extension Cover (60" Model only) 8-17 Media Lever
More informationDC-D4213RX DC-D4213WRX
Network Camera Quick Guide DC-D4213RX DC-D4213WRX Powered by Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
More informationdv/dt filter compact plus Voltage Peak Limiter SINAMICS SINAMICS G120P dv/dt filter compact plus Voltage Peak Limiter Safety information 1 General 2
dv/dt filter compact plus Voltage Peak Limiter SINAMICS SINAMICS G120P dv/dt filter compact plus Voltage Peak Limiter Operating Instructions Safety information 1 General 2 Mechanical installation 3 Electrical
More informationVector Beam White. User Manual. Order code: LEDJ265
Vector Beam White User Manual Order code: LEDJ265 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Before your initial start-up, please make
More informationCPA 40 Two Channel Amplifier
www.cleveracoustics.co.uk CPA 40 Two Channel Amplifier Order code: CRAM01 USER MANUAL WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this
More information3M Duplex Polishing Machine 6851-E with Universal Dual Holder Instructions
3M Duplex Polishing Machine 6851-E with Universal Dual Holder Instructions Safety Information Read, understand and follow all safety information contained in these user instructions prior to use of the
More informationINSTALLATION SUPPLY DOES NOT INCLUDE THE BRACKETS SUPPORTING THE WINDING TUBE AND ELECTRICAL COMPONENTS.
INSTALLATION 2 3 4 5 6 7 9 8 10 LEGEND: 1. Movement chain 2. Electrical motor 3. Winding tube 4. Strap fastening 5. Central winding roller 6. Side winding roller 7. Terminal chain 8. Winding tube plug
More informationINCLUDED HARDWARE REQUIRED TOOLS GETTING STARTED DISCLAIMERS! 5/32 Allen Wrench (Provided)
UPSIDE INCLUDED HARDWARE 8 x 5/8 Screw M6x16 REQUIRED TOOLS 5/32 Allen Wrench (Provided) GETTING STARTED Assemble on a soft surface to avoid scratching the worksurface. Hardware & tools required may vary
More informationInstallation Guide. QBox-V6. Standalone/Spare V6 SDI QBox. Standalone/Spare V6 SDI QBox. Part No. A
Installation Guide Standalone/Spare V6 SDI QBox QBox-V6 Standalone/Spare V6 SDI QBox Part No. A9009-0004 EN www.autocue.com Copyright 2017 All rights reserved. Original Instructions: English All rights
More informationCrossfire. User Manual. Order code: EQLED061
Crossfire User Manual Order code: EQLED061 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Before your initial start-up, please make sure
More informationPRODUCT MARKING AND BARCODE IDENTIFICATION. up to Serial No Barcode/Label printer MACH4. Service Manual. Edition 11/06
PRODUCT MARKING AND BARCODE IDENTIFICATION up to Serial No. 9999 Barcode/Label printer MACH4 Service Manual Edition 11/06 copyright by cab / 9008553 / Q49 / 1 All specifications about delivery, design,
More informationINSTALLATION INSTRUCTIONS
TS1000C TS700C INSTALLATION INSTRUCTIONS CONTENT: 1. Important safety instructions. 2. Specifications and main dimensions. 3. Parts included. 4. Installation. 5. RF remote system. 6. Feature functions
More informationStarlit Dance Floor. User Manual
Starlit Dance Floor User Manual Order codes: 500W Power Supply - LEDJ405 750W Power Supply - LEDJ427 1000W Power Supply - LEDJ428 1500W Power Supply - LEDJ429 White Remote Control Pack - LEDJ406 White
More informationOperating Instructions
TPS S1 AC in DC out Translation of the original instructions TPS 110-400 Mains pack Operating Instructions PT 0199 BEN/C (1010) EN Table of contents Table of contents 1 About this manual...............................................
More informationDigital Overhead Stirrer
A Geno Technology, Inc. (USA) brand name Digital Overhead Stirrer Cat. No. BT1021 1-800-628-7730 1-314-991-6034 info@btlabsystems.com Thanks for choosing BT1021 Digital Overhead Stirrer. This operation
More informationSliding shutter control Aluminium shutters
Sliding shutter control Aluminium shutters Operating and maintenance instructions FOR THE USER Valid from 09.2011 E 916.3 Notes These operating instructions describe how to operate the EHRET sliding shutter
More informationOperating Instructions Wall saw WSE1217 USA
Operating Instructions Index 000 Original operating instructions 10992859 en / 25.04.2012 Congratulations! With a Hydrostress unit from TYROLIT, you have chosen a tried and tested piece of equipment which
More informationIMPACT Order code: EQLED79
Order code: EQLED77 IMPACT Order code: EQLED79 User manual Safety WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this equipment away from
More informationThe power behind competitiveness. Delta Infrasuite Power Management. Power Distribution Unit. User Manual.
The power behind competitiveness Delta Infrasuite Power Management Power Distribution Unit User Manual www.deltapowersolutions.com Save This Manual This manual contains important instructions and warnings
More informationOperating Manual -ENGLISH- Page 1 KWG-ISO
Page 1 KWG-ISO Operating manual English- Status May 2013 Page 2 Manufacturer address KW-Generator GmbH & Co.KG Bänglesäcker 24 73527 Schwäbisch-Gmünd / Lindach Phone: +49 (0) 7171 104 17 0 Fax: +49 (0)
More informationUV Spectra Batten 12 x 5W UV LEDs
UV Spectra Batten 12 x 5W UV LEDs User Manual Convection cooled, no fan! Optional IR remote Order ref: LEDJ90E Order code: LEDJ98 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
More informationEnglish. Operating manual. Universal transmitter UT125. Save for later reference. Companies / brands of GHM
English Operating manual Universal transmitter UT125 Companies / brands of GHM www.ghm-messtechnik.de Save for later reference. Table of contents page 1. Intended use (areas of application)... 3 1.1 Safety
More informationMX-T6-PRO/S Tube Rollers
MX-T6-PRO/S Tube Rollers User Manual MX-T6-Pro MX-T6-S LCD Digital Tube Roller Classic Tube Roller Please read the User Manual carefully before use, and follow all operating and safety instructions! Technical
More informationNetwork Camera. Quick Guide DC-B1203X. Powered by
Network Camera Quick Guide DC-B1203X Powered by Safety Precautions English WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
More informationCS2 DMX Distribution Splitter
CS2 DMX Distribution Splitter User Manual Order code: BOTE72 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Before your initial start-up,
More informationHST -TZ1 Guard-locking mechanism (Translation of Original Manual)
Installation and Operating Manual for Components HST -TZ1 Guard-locking mechanism (Translation of Original Manual) HST-TZ1 Ident.-No.: 10234 HST-TZ1 Ident.-No.: 10236 HST-TZ1 Ident.-No.: 10235 HST-TZ1
More informationGMH Operating Manual for Digital Quick-Response Thermometer
H58.0.01.6C-02 Operating Manual for Digital Quick-Response Thermometer GMH 1170 WEEE-Reg.-Nr. DE93889386 GHM Messtechnik GmbH Standort Greisinger Hans-Sachs-Str. 26 D-93128 Regenstauf +49 (0) 9402 / 9383-0
More informationDVI Extender over Fiber with EMI Shielding
DVI Extender over Fiber with EMI Shielding Model #: FO-DVI-1000M-EMI 2010 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. ( Avenview ) products.
More informationTable of Contents Quick Install Guide page Introduction Safety Rack System Precautions ESD Precautions...
Table of Contents Quick Install Guide page 1 EN English Table of Contents 1. Introduction... 2 1.1 Safety... 2 1.2 Rack System Precautions... 2-3 1.3 ESD Precautions... 3... 3 1... 3 2 Fitting PSU s...
More informationBS 287 DUAL CHANNEL POWER SUPPLY. User Manual. January 2017 V1.0
BS 287 DUAL CHANNEL POWER SUPPLY User Manual January 2017 V1.0 Table of contents 1.0 SAFETY INSTRUCTIONS... 3 2.0 GENERAL DESCRIPTION PS 289... 4 3.0 MECHANICAL INSTALLATION... 5 4.0 MAINS POWER & SAFETY
More informationSINAMICS. SINAMICS G120P dv/dt filter plus Voltage Peak Limiter. Safety information 1. General. Mechanical installation. Electrical installation 4
Safety information 1 General 2 SINAMICS SINAMICS G120P dv/dt filter plus Voltage Peak Limiter Operating Instructions Mechanical installation 3 Electrical installation 4 Maintenance and servicing 5 Technical
More informationUser & Maintenance Manual (original)
User & Maintenance Manual (original) Type: IMPORTANT Carefully read this User Manual and follow the instructions and warnings before operating the machine. Any modification or change may cause the loss
More informationDiagonal, xx-4. User manual Mounting instruction. Keep this folder with product at all times! PDF 6117 /
Diagonal, 30-409xx-4 User manual Mounting instruction Keep this folder with product at all times! PDF 6117 / 30.09.2014 Page 1 Ropox 2014 Table of Contents TABLE OF CONTENTS... 1 1. INTRODUCTION... 3 2.
More informationUser's Guide. Model High Precision Quad Output DC Power Supply
User's Guide Model 382270 High Precision Quad Output DC Power Supply Introduction Congratulations on your purchase of the Extech 382270 DC Power Supply. The Model 382270 can be used for many applications
More informationOV1000 Part No OV1000 HEIGHT ADJUSTABLE TABLE USER GUIDE
OV1000 Part No. 23624 OV1000 HEIGHT ADJUSTABLE TABLE USER GUIDE PRODUCT OVERVIEW User Guide: OV1000 OV1000 HEIGHT ADJUSTABLE TABLE A healthier work environment starts with the option to sit or stand throughout
More informationOperation Manual. for Micromas ter I Micros copes. T his manual covers catalog numbers : S 11031, S 11033, and S 11035
Operation Manual for Micromas ter I Micros copes T his manual covers catalog numbers : S 11031, S 11033, and S 11035 General Operation Thank you for purchasing a Micromaster I microscope. This instrument
More informationVersion-E Manual PR1a. Photocell. Manual. Page 1
Version-E16-06-02 Photocell Manual Page 1 Important Information General Before using your ALGE-TIMING device read the complete manual carefully. It is part of the device and contains important information
More informationTPC25 active crossover. user manual
TPC25 active crossover user manual Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 25.09.2017,
More informationThe following symbols are used to show dangerous operation or handling. Make sure you understand them before reading the guide.
Safety Instructions Before use Thank you very much for purchasing this product. This product is an interface box called "Connection & Control Box" for EPSON short throw projectors. For your safety, read
More informationAUREOL RECESSED BEAMSHAPER OPERATION MANUAL
AUREOL RECESSED BEAMSHAPER OPERATION MANUAL Thank you for purchasing an Aureol Recessed BeamShaper. We have designed this luminaire to provide superior performance in design and engineering and we are
More informationModel No. ET-JPF200BE
Operating Instructions Floor Stand Kit Commercial Use Model No. ET-JPF200BE ET-JPF200WE ENGLISH FRANÇAIS ESPAÑOL DEUTSCH ITALIANO * The above illustration is of this product mounted to an optional projector.
More informationOmnitron Systems Technology, Inc. 1. iconverter. 19-Module Managed Power Chassis User s Manual
Omnitron Systems Technology, Inc. 1 iconverter 19-Module Managed Power Chassis User s Manual 27 Mauchly, #201, Irvine, CA 92618 Phone: (949) 250-6510; Fax: (949) 250-6514 2 Omnitron Systems Technology,
More informationVariable-Speed Vortex Mixer
Variable-Speed Vortex Mixer User Guide Version 1.1 IEC connector Retort rod fitting Rubber cup Speed control dial Power on/off button Mode button Figure 1: Vortex Mixer Figure 2: Front panel 2 Variable-Speed
More informationBlitzer Strobe. User Manual. Order code: EQLED366
Blitzer Strobe User Manual Order code: EQLED366 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Before your initial start-up, please make
More informationOperation Manual WARNING. Be sure to read this Operation Manual before use. Universal Space Amusement Equipment Ltd.
WARNING Be sure to read this Operation Manual before use. Universal Space Amusement Equipment Ltd. CONTENTS 1. The company..2 2. Specifications.. 3 3. Package Contents..5 4. Installation, Fix and Transport..6
More informationESV3000 ETDRS Illuminated Cabinet INSTRUCTION MANUAL
ESV000 ETDRS Illuminated Cabinet INSTRUCTION MANUAL ACTUAL SIZE LETTER FOOT METER SIZE 0 0 80 24 24M 6 50 40 2 25 20 16 19 15 12 9.5 7.5 6 4.8 Developed by Lea Hyvärinen, M.D. FOR TESTING AT FEET ( METERS)
More informationUV Power Flood. User Manual. Order code: EQLED029
UV Power Flood User Manual Order code: EQLED029 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CARE- FULLY BEFORE YOUR INITIAL START-UP! Before your initial start-up, please make
More informationOMM200 and OMM200T. Metallurgical Microscope
OMM200 and OMM200T Metallurgical Microscope Instruction Manual (Please read the manual carefully before using the microscope) Contents Safety ----------------------------------------------------------------------------
More informationD610H, D610H MKII, D610S, D610T dimmer pack. user manual
D610H, D610H MKII, D610S, D610T dimmer pack user manual Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de
More informationicore Kiosk system Installation Guide
icore Kiosk system Installation Guide The reproduction, transmission or use of this document or its contents is not permitted without express authority. Offenders will be liable for damages. All rights,
More informationTA18 active subwoofer. user manual
TA18 active subwoofer user manual Musikhaus Thomann e.k. Treppendorf 30 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 email: info@thomann.de Internet: www.thomann.de 30.11.2011 Table of contents
More informationLine reactors SINAMICS. SINAMICS G130 Line reactors. Safety information 1. General. Mechanical installation 3. Electrical installation
Safety information 1 General 2 SINAMICS SINAMICS G130 Mechanical installation 3 Electrical installation 4 Technical specifications 5 Operating Instructions Control version V4.7 04/2014 A5E00331462A Legal
More informationB63/ NS MS. EtherNet/IP LINK
3 609 929 B63/ IMenip 2008-09 NS MS EtherNet/IP LINK 3 609 929 B63/2008-09 IMenip Bosch Rexroth AG 15/76 Table of Contents About this document................. 16 General safety instructions............
More informationSlimline CW & WW Series
Slimline CW & WW Series 1 x 20W COB LED User Manual Convection cooled, no fan! Optional IR remote Order ref: LEDJ90E White housing versions Order codes: LEDJ61-1CW20 Black housing LEDJ61A - 1CW20 White
More information2 Port DVI Splitter. Model #: SPLIT-DVI
2 Port DVI Splitter Model #: SPLIT-DVI-2 2010 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. ( Avenview ) products. Avenview makes no representations
More informationPF LED Profile. User Manual
PF LED Profile User Manual Order codes: ELUM094-100W 3200K WW Version ELUM095-100W 6000K CW Version ELUM096-150W 3200K WW Version ELUM097-150W 6000K CW Version Safety advice WARNING FOR YOUR OWN SAFETY,
More informationVortex. User Manual. Order code: EQLED073
Vortex User Manual Order code: EQLED073 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE INITIAL START-UP! Before initial start-up, please make sure that there is
More informationBlue Weapon Laser. User manual UK. Version 1.0
Blue Weapon Laser User manual 152.754UK Version 1.0 CAUTION 15. Disposal : Please disposal of the unserviceable device according to the current statutory requirements. Please read this manual fully before
More informationBK MIKRO. Air Barrier Adapter. Assembly Instructions Issue 1.00 dated
BK MIKRO Air Barrier Adapter Assembly Instructions Issue 1.00 dated 5.6.2008 MSC Tuttlingen GmbH Rudolf-Diesel-Straße 17 78532 Tuttlingen Germany Tel. +49 7461 925-200 Fax +49 7461 925-268 E-Mail sales@msc-tuttlingen.de
More informationDC-V3213XJ-4.3mm DC-V3213XJ-2.5mm
Network Camera Quick Guide DC-V3213XJ-4.3mm DC-V3213XJ-2.5mm Powered by Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
More informationVacuum Tubes Power Supply Unit. for WA7 and WA7d Fireflies. Owner s Manual. Please review this manual before operating your WOO AUDIO product.
WOO AUDIO WA7tp Vacuum Tubes Power Supply Unit for WA7 and WA7d Fireflies Owner s Manual Please review this manual before operating your WOO AUDIO product. Inc. All rights reserved. www.wooaudio.com Rev
More informationAssembly and Operating Instructions Door Control
S10 GB Assembly and Operating Instructions Door Control Important information for: Fitters Electricians Users Please forward accordingly! These instructions must be kept for future reference. Assembly
More informationPSA200 User s Manual
2011 Visionary Solutions, Inc. All rights reserved. Please visit the support section of our website at www.vsicam.com for manuals, other documentation, and software downloads. Visionary Solutions, Inc.
More informationOV1001 Part No OV1001 HEIGHT ADJUSTABLE TABLE USER GUIDE
OV1001 Part No. 23620 OV1001 HEIGHT ADJUSTABLE TABLE USER GUIDE PRODUCT OVERVIEW User Guide: OV1001 OV1001 HEIGHT ADJUSTABLE TABLE A healthier work environment starts with the option to sit or stand throughout
More informationLED FOLDING WORKLIGHT TM
LED FOLDING WORKLIGHT TM LED LIGHT POWERSTRIP USB CHARGING ITM. / ART. 689211 Model: LM55812 CARE & USE INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY For assistance with assembly
More informationDigital Quick-Response Thermometer
H56.0.01.6C-06 Digital Quick-Response Thermometer Operating Manual GTH 1170 WEEE-Reg.-Nr. DE93889386 GHM Messtechnik GmbH Standort Greisinger Hans-Sachs-Str. 26 D-93128 Regenstauf +49 (0) 9402 / 9383-0
More informationOperating and Installation Manual. EASYLAB Expansion modules Type EM-TRF for 230 V AC mains voltage
Operating and Installation Manual EASYLAB Expansion modules Type EM-TRF for 230 V AC mains voltage Type EM-TRF-USV for 230 V AC mains voltage; provides uninterruptible power supply (UPS) The art of handling
More informationOperating Instructions
Operating Instructions Index 000 DME20PU DME20PW Original operating instructions 10992610 en / 10.05.2012 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested piece
More informationSIWAREX JB Aluminum Housing. Instruction Manual Edition 03/2006
s SIWAREX JB Aluminum Housing Instruction Manual Edition 03/2006 Table of Contents Table of Contents... 2 Warning and Safety Terms... 3 General... 4 1 Technical Description... 5 1.1 Area of Application...
More informationExplosion-Protected Arc-Fault Protection ExAFCI Arc-Fault Circuit Interrupter
Installation, Operation & Maintenance Sheet Explosion-Protected Arc-Fault Protection ExAFCI Arc-Fault Circuit Interrupter > Contents 1 Contents 1 Contents...2 2 General Information...2 2.1 Manufacturer...2
More information1 Channel Strobe Controller ORDERCODE 40226
1 Channel Strobe Controller ORDERCODE 40226 Congratulations! You have bought a great, innovative product from Showtec. The Showtec Strobe Controller brings excitement to any venue. Whether you want simple
More informationIO-AO6X I/O Expansion Module 6 Isolated Analog Outputs
IO-AO6X I/O Expansion Module 6 Isolated Analog Outputs The IO-AO6X is an I/O Expansion Module that can be used in conjunction with specific Unitronics OPLC controllers. The module offers 6 12-bit isolated
More informationSingle Kernel Grain Moisture Tester PQ-520. (type PQ ) Operating Instructions
Single Kernel Grain Moisture Tester PQ-520 (type PQ-5205-1) Operating Instructions Single Kernel Grain Moisture Tester Safety Precautions Not following the safety precautions could cause an accident resulting
More informationTABLE OF CONTENTS. Page 2 14
TABLE OF CONTENTS INTRODUCTION... 3 WARNING SIGNS AND THEIR MEANINGS... 3 1. PRODUCT OVERVIEW... 4 1.1. Basic features and components... 4 1.2. Supply package... 5 1.3. Robot arm specifications... 6 1.4.
More information3-Phase, Dual-Input 6-Slot Power Supply System STARTUP GUIDE
3-Phase, Dual-Input 6-Slot Power Supply System STARTUP GUIDE -ST-01 Page 1 of 10 November 2016 2016 Copyright Lite-On Technology Corporation ALL RIGHTS RESERVED. Lite-On is a trademark of Lite-On Technology
More information5 B&W Rear View System Camera
5 B&W Rear View System Camera Instruction Manual MODEL: CA453 www.lorexcctv.com Copyright 2007 LOREX Technology Inc. Thank you for purchasing the Lorex 5 Black & White Rear View System Camera. This system
More informationBS 181 SINGLE CHANNEL POWER SUPPLY USER MANUAL
BS 181 SINGLE CHANNEL POWER SUPPLY USER MANUAL Issue 2011 ASL Intercom BV DESIGNED & MANUFACTURED BY: ASL Intercom B.V. Zonnebaan 42 3542 EG Utrecht The Netherlands Tel: +31 (0)30 2411901 Fax: +31 (0)30
More informationTRC-190 User s Manual
User s Manual Edition 3.2, May 2017 www.moxa.com/product 2017 Moxa Inc. All rights reserved. User s Manual The software described in this manual is furnished under a license agreement and may be used only
More informationDocumentation ZB8610. Fan cartridge for EtherCAT and Bus Terminals. Version: Date:
Documentation Fan cartridge for EtherCAT and Bus Terminals Version: Date: 1.5 2017-08-07 Table of contents Table of contents 1 Foreword... 5 1.1 Notes on the documentation... 5 1.2 Safety instructions...
More informationOrder code: EQLED53 User manual
www.prolight.co.uk Order code: EQLED53 User manual Safety WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this equipment away from rain,
More informationDMX LED Starcloth Systems
DMX LED Starcloth Systems User Manual Order codes: 3 x 2m with Stand & Bag Set (Black cloth, CW) - STAR01 2.2 x 1m DJ Skirt (Black cloth, CW) - STAR04 3 x 2m (Black cloth, CW) - STAR05 3 x 2m (White cloth,
More informationINSTRUCTION MANUAL. Instruction Manual. Analog Multi-Tube Vortexer Digital Multi-Tube Vortexer
INSTRUCTION MANUAL Instruction Manual Analog Multi-Tube Vortexer Digital Multi-Tube Vortexer Table of Contents Package Contents............ 1 Warranty............ 1 Installation............ 2 Maintenance
More informationHDMI 1.3 Matrix Switch Receiver over CAT5 with IR Pass-Through
HDMI 1.3 Matrix Switch Receiver over CAT5 with IR Pass-Through Model #: HDMI-C5SW-R 20010 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc.
More informationiq 16 Sync Charge Box
USER INSTRUCTIONS iq 16 Sync Charge Box (iq 16 SCB Sync Station ) www.lockncharge.com iq 16 Sync Charge Box Contents Overview...1 Specifications...1 Safety instructions...2 Set up...2 How to charge multiple
More informationRESIDENTIAL OPERATOR MOTOR CONTROL BOARD REPLACEMENT INSTRUCTIONS
READ THIS MANUAL CAREFULLY BEFORE BEGINNING INSTALLATION RESIDENTIAL OPERATOR MOTOR CONTROL BOARD REPLACEMENT INSTRUCTIONS PRODUCT FEATURES MODELS: IIA SPRINT 310/510/710 200/250 2000 SERIES 3000 SERIES
More informationControl Unit KEH-P / Force-1.DIN
Translation of the Original Manual Control Unit KEH-P / Force-1.DIN Assembly and Operating Manual Superior Clamping and Gripping Translation of the Original Manual Imprint: Copyright: This manual remains
More informationCubePro. Main PCB Replacement Guide. Prosumer 3D Printer. Original Instructions
CubePro Prosumer 3D Printer Main PCB Replacement Guide Original Instructions 1 INTRODUCTION COPYRIGHT 2014 by All rights reserved. This document is subject to change without notice. This document is copyrighted
More information