Wireless Charging PRODUCT MANUAL

Size: px

Start display at page:

Download "Wireless Charging PRODUCT MANUAL"

Marsha Price
5 years ago
Views:

1 Wireless Charging PRODUCT MANUAL

2 IMPORTANT - PURPOSE OF DOCUMENT THIS DOCUMENT IS FOR USE BY CUSTOMERS WHO PURCHASE THEREFERENCED TESLINK PRODUCTS FROM OFS BRANDS, INCORPORATED OR ITS AFFILIATES. THIS DOCUMENT IS INTENDED TO PROVIDE INSTALLATION AND USE REQUIREMENTS AND GUIDELINES FOR ALL SAFETY AND OPERATING REQUIREMENTS INCLUDING BUT NOT LIMITED TO ELECTRICAL AND RF EXPOSURE. THIS DOCUMENT IS AN INTEGRAL COMPONENT OF THE EQUIPMENT S AUTHORIZATION AND THE INSTRUCTIONS HEREIN ARE MANDATORY IN ORDER TO COMPLY WITH REGULATORY AUTHORIZATION. SAFETY INFORMATION OFSBRANDS REQUIRES THAT THE CUSTOMER WILL INCLUDE APPROPRIATE SAFETY WARNINGS AND INFORMATION FOR END USERS OF ALL PRODUCTS WHICH INCORPORATE TESLINK PRODUCTS. SUCH WARNINGS AND INFORMATION MUST INCLUDE THOSE SET FORTH BELOW AND OTHER WARNINGS AND INFORMATION AS THE CUSTOMER DETERMINES NECESSARY AND APPROPRIATE. DANGER To reduce the risk of electrical shock: Always unplug the appliance from the electrical outlet before removing. Do not reach for an appliance that has fallen into water -unplug it immediately. Do not disassemble or modify any part of this appliance. Do not install this product in any ferrous or non-ferrous electrically conductive surface. WARNING To reduce the risk of burns, fire, eletrcial shock or injury to persons: This product should not be used by children or persons with disabilities that may hinder their ability to understand all product information and use the product safely. Close supervision is necessary when this product is used near children or persons with disabilities. Use this product only for its intended use as described in this manual. Never operate this product if it has a damaged housing, cord, plug cable, or if wet. Keep cord away from heated surfaces and liquid. Do not operate where aerosol products are being used or oxygen is being administered. This product is designed for indoor use only. Wireless Charging by OFS Product Manual Page 2 of 7

3 WARNING..continued Do not install or use this product outdoors. Do not use this appliance with an extension cord or overloaded electrical outlet. Do not place or leave metallic objects between the charging surface and device being charged. This product shall be used strictly in accordance with the installation instructions contained within this document. DO NOT PLACE A RECEIVER DIRECTLY ON THE TRANSMITTER - DAMAGE WILL OCCUR. A minimum of 19mm of space must be present between the transmitter and receiver for the system to work optimally. System damage and failure could occur if warning is ignored. SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions for device that must be followed. MODELS: WCU-CU Before using the device, read all instructions and cautionary markings on the device, power supply and associated product(s) using the device. CAUTION -To reduce damage or risk of injury, charge only Air Fuel Resonant-certified products. FCC & INDUSTRY CANADA COMPLIANCE The customer and installer shall inform end users of the following to the extent applicable: This device complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) exposure rules only when installed according to the requirements in this installation document. Changes or modifications not expressly approved by Gill Electronics could void the user s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules when installed according to the instructions contained within this document. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Wireless Charging by OFS Product Manual Page 3 of 7

4 FCC & INDUSTRY CANADA COMPLIENCE..continued If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna/ device. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. IMD - Stay atleast 36 away from the transmitter. This Class B digital apparatus complies with Canadian ICES-001-V4. EUROPEAN DECLARATION OF CONFORMITY We, Gill Electronics, Incorporated, 5271 Plainfield Ave. NE. Grand Rapids, MI 49525, USA, declare under our sole responsibility that the product Wireless Power Transmitter WPT503CM/GW to which this declaration relates is in conformity with the following standard(s) or other inorma tive document(s): EN (2011) / A1 (2011) EN v ( ) EN V1.9.2 (2011) EN V2.2.1 (2012) EN V1.4.1 (2013) EN EN Following the provisions of Electromagnetic Compatibility, R&TTE Emissions, and Safety directive(s). The Technical Construction File is maintained at: Gill Electronics Inc Plainfield Ave. NE Grand Rapids, Ml USA Wireless Charging by OFS Product Manual Page 4 of 7

5 SAFETY AND COMPLIANCE CONSIDERATIONS The customer is responsible for taking all steps necessary and appropriate for proper installation of TesLink products to insure their safe operation including RF exposure requirements and all other applicable regulations. For the purpose of this document the installer is referred to as the person who is doing the actual installation of the TesLink product. Safety is dependent on a proper installation of a TesLink product. The Installer shall read and fully understand this document prior to installation. The installer must have a good understanding of electrical procedures and systems. There are no adjustments required at any time to the electrical components within the transmitter. Do not open the transmitter housings or make modifications to the Teslink transmitter or components unless expressly approved in writing by an authorized representative of Gill Electronics. Any changes or modifications will void the product warranty. DURING INSTALLATION DO NOT connect this charger to an electrical outlet until: ALL other electrical connections are made. Mounting of ALL components is complete. VERIFICATION that no short circuit exists in the entire system VERIFICATION that transmitter is mounted in such a location and manner that no animate object, can in a normal manner of contact, come within 4.5 of the bottom of a transmitter. (i.e. the charge area of a transmitter mounted in a desk would be far enough away from the edge that if a person was sitting in a chair their thighs/knees would not be positioned with 4.5 of the bottom of the charge area of the transmitter). This is required to satisfy FCC RF exposure compliance. See ensuing illustrations for more details. VERIFICATION that transmitter is mounted in such a location that charge area is a minimum of 5 away from any edge accessible to bystanders. This is required to satisfy FCC RF exposure compliance. See ensuing illustrations for more details. Install under a horizontal surface only. DO NOT install equipment or route wiring cords in the path of any walkways or moving components. BEFORE drilling into the work surface, make sure that there are no metal objects, beams, or structures within 1.0 around (X,Y) and within 2.0 below (Z) of the transmitter. When drilling into the work surface, DO make sure that both sides of the surface are clear of anything that could be damaged The charging area on top of the work surface/furniture must be indicated in some manner. Wireless Charging by OFS Product Manual Page 5 of 7

6 AFTER INSTALLATION Test the transmitter to ensure that it is working properly File these instructions in a safe place and refer to them if re-installing. WARNING: Failure to follow all safety precautions and instructions may result in death, serious injury, or property damage. The installer assumes responsibility for such installation precautions and instructions and for any failure to follow them. May cause interference with touch screen/pad for some electronic devices. If issue is noted cycle phone device power button to clear and do not use while charging. DISCLAIMER By proceeding with installation ofteslink components in products, the installer agrees that: (i) except to the extent provided in 47 CFR Gill is not liable under any theory of contract, tort law, or otherwise for any loss, damage, death, personal injury, special, incidental, or consequential damages, or any other damage of any nature arising directly or indirectly from or relating to the improper installation or use of Gill products or components in public, residential, or office furniture or any other application; and (ii) the customer will defend, indemnify, protect, and hold harmless Gill and each of its affiliates, officers, directors, agents, and employees from and against any such liability, claims, injuries, losses, and damages. In order to safely install and use Gill products and components, full consideration of the work environment ( e.g., location of electrical wiring, support members, surface thicknesses, and other electrical and structural components) is required. Gill disclaims responsibility for improper use or installation of products or components and use or installation not consistent with the original manufacturer specifications and recommendations for such products or components. Warranty Information Neither this document nor the statements in this document create any warranties, express or implied, regarding TesLink products. All information regarding any warranties made by Gill to the purchaser of components is located in separate documentation provided by Gill to the customer. Gill makes no other warranties and specifically disclaims any express or implied warranties of merchantability or fitness for purpose. No warranty shall extend to any person other than the customer who purchases the TesLink product from Gill. Wireless Charging by OFS Product Manual Page 6 of 7

7 CERTAIN PRE-INSTALLATION CONSIDERATIONS Gill is responsible for ensuring products meet all regulatory requirements and provide instructions to ensure a proper installation. The customer or installer is responsible for taking all steps necessary and appropriate for safe and proper installation of actual TesLink products. If there is the potential for a user s legs to be under a transmitter (i.e. sitting at a desk or table) there are installation requirements that MUST be met as follows: If the top of the seating surface is 22cm ( ) or greater away from the bottom of the surface/ desk/table then the only requirement is to be 2 from the edge. See installation diagrams as follows for critical installation details. INSTALLATION DRAWING FIG. 1 Side view (not to scale) FIG. 2 Expanded view (not to scale) Note: Correct installation according to these guidelines is required in order to satisfy FCC RF exposure compliance. Wireless Charging by OFS Product Manual Page 7 of 7

8 POWER SUPPLY INFORMATION This TesLink through Surface Transmitter is supplied with a power supply having the following specifications: Output Voltage: 36VDC 1.25A Input Voltage: VAC 50-60Hz Operating Temperature: 0 C C Country of Origin: China IMPORTANT - Under no circumstances should the installer use or supply the end user with a power supply that was not originally provided with the TesLink product. Gill Electronics package graphics and other marks are trademarks of Gill Electronics Inc. All other brand names are trademarks of their respective owners. Gill Electronics Inc. is not affiliated with the respective owners of their trademarks. TesLink is a trademark of Gill Electronics Inc. All rights reserved. Wireless Charging by OFS Product Manual Page 8 of 7

9 ww TROUBLESHOOTING PROBLEM My electronic device is not charging. SOLUTION Confirm that you have followed the set-up instructions and that the Wireless Charger is properly plugged into an electrical outlet and the DC plug is inserted in the charger. Verify that your device is properly positioned on the charger. To reestablish a connection, pick up the device from the charger surface and then place your device on the charger surface. Confirm that the charging indicator light on the phone is active. Please note that if the device is not charging, this may indicate that the device has 12 been fully charged and no further charging is needed. PROBLEM The indicator LED is flashing while attempting to charge. SOLUTION Move your device to the center of the charging area to insure connectivity. PROBLEM The indicator light is not lit. SOLUTION Check to see if power adapter is plugged in to the wall and/ or the charger unit. PROBLEM The indicator light is blinking red. SOLUTION Remove all items from the charging surface and recycle the power. ONE YEAR LIMITED WARRANTY Gill Electronics sells its products with the intent that they are free of defects in manufacture and workmanship for one year from the date of original purchase, except as noted below. Gill Electronics warrants that its products will be free of defects in material and workmanship under normal use and service. This warranty extends only to consumers. Wireless Charging by OFS Product Manual Page 9 of 7

10 CUSTOMER SERVICE Contact us via or call and ask for customer service. OFS Brands does not authorize anyone, including, but not limited to, Retailers, the subsequent consumer purchaser of the product from a Retailer or remote purchasers, to obligate OFS Brands or Gill Electronics in any way beyond the terms set forth herein. This warranty does not cover damage caused by misuse or abuse; accident; the attachment of any unauthorized accessory; alteration to the product; improper installation; unauthorized repairs or modifications; improper use of electrical/ power supply; loss of power; dropped product; malfunction or damage of an operating part from failure to provide manufacturer s recommended maintenance; transportation damage; theft; neglect; vandalism; or environmental conditions; loss of use during the period the product is at a repair facility or otherwise awaiting part or repair; or any other conditions whatsoever that are beyond the control of Gill Electronics. This warranty is effective only if the product is purchased and operated in the country in which the product is purchased. A product that requires modifications or adoption to enable it to operate in any other country than the country for which it was designed, manufactured approved and/or authorized, or repair of products damaged by these modifications is not covered under this warranty. THE WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE WARRANTY. THERE SHALL BE NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS OR ANY OTHER OBLIGATION ON THE PART OF THE COMP ANY WITH RESPCT TO PRODUCTS COVERED BY THIS WARRANTY.INCIDENTAL, NEITHER OFSBRANDS OR GILL ELECTRONICS SHALL HAVE NO LIABILITY FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. IN NO EVENT SHALL THIS WARRANTY REQUIRE MORE THAN THE REP AIR OR REPLACEMENT OF ANY PART OR PARTS WHICH ARE FOUND TO BE DEFECTIVE WITHIN THE EFFECTIVE PERIOD OF THE WARRAN1Y. NO REFUNDS WILL BE GIVEN. IF REPLACEMENT PARTS FOR DEFECTIVE MATERIALS ARE NOT AVAILABLE, GILL ELECTRONICS RESERVES THE RIGHT TO MAKE PRODUCT SUBSTITUTIONS IN LIEU OF REPAIR OR REPLACEMENT. This warranty does not extend to the purchase of opened, used, repaired, repackaged, and/ or resealed products, including but not limited to sale of such products on internet auction sites and/ or sales of such products by surplus or bulk resellers. Any and all warranties or guarantees shall immediately cease and terminate as to any products or parts thereof which are repaired, replaced, altered, or modified, without the prior express and written consent of OFS Brands or Gill Electronics. This warranty provides you with specific legal rights. You may have additional rights which may vary from country to country. Because of individual regulations, some of the above limitations and exclusions may not apply to you. For more information regarding our product line visit: LEGAL Distributed and marketed by Gill Electronics under license. TesLink is a trademark of Gill Electronics, registered in the U.S. and other countries. Air Fuel a trademark of the AirFuel Alliance. Wireless Charging by OFS Product Manual Page 10 of 7

11 Wireless Charging PRODCUT MANUAL an OFS Brands company 1204 East Sixth Street Huntingburg, IN ofs.com 10.16

Owner's Manual. For latest instructions please go to

Owner's Manual. For latest instructions please go to mycharge name and logo are registered trademarks of RFA Brands. 2012-2013 RFA Brands. All Rights Reserved. Patent Pending. Made in China. IB-MYC05001RM Owner's Manual For latest instructions please go