Phantom Series. Operating Instructions. HDMI Switchers with Audio De-Embedder, Coaxial Audio, Optical Digital Audio & Analog L/R.

Transcription

1

2 Rev 0 March 2013 Key Digital, led by digital video pioneer Mike Tsinberg, develops and manufactures high quality, cutting-edge technology solutions for virtually all applications where high quality video imaging is important. Key Digital is at the forefront of the video industry for Home Theater Retailers, Custom Installers, System Integrators, Broadcasters, Manufacturers, and Consumers. Key Digital Systems :: 521 East 3rd Street :: Mount Vernon, NY Phone : Fax : Web :

3 Phantom Series HDMI Switchers with De-Embedder, Coaxial, Optical Digital & Analog L/R Operating Instructions KD-HDSW2x1Pro KD-HDSW3x1Pro KD-HDSW4x1Pro The Experts in Digital Video Technology and Solutions

4 4 Table of Contents Introduction... 1 Quick Setup Guide... 2 Installation and Operation... 3 DVI Applications for KD-HDSW Pro Series IR Remote Control Serial IR & IR Emitter Control... 4 EDID Control Settings... 5 External Outputs... 6 RS-232 Commands and Protocol... 6 Using ias Intelligent Auto Sense... 7 Specifications... 7 Important Product Warnings & Safety Instructions:... 8 How to Contact Key Digital... 9 Warranty Information... 9 Always follow the instructions provided in this Operating Manual Key Digital, Inc. All rights reserved.

5 1 Introduction Key Digital Phantom Series HDMI/DVI switchers are designed and engineered to offer the best in quality, performance, and reliability while providing a cost effective HDMI/DVI switching solution. Phantom Series HDMI switchers are a transparent solution for all digital video/audio switching applications and support all HD and SD video standards, including 1080p/60. In addition, the KD-HDSW line has complete support for the latest 3D technology. KD-HDSWPro switchers feature ias Intelligent Auto Sense signal detection and switching, pushbutton control, IR, RS-232, status-monitoring LEDs, and support for HDMI CEC. The Phantom Series switchers support multiple unit expandability, and are individually addressable. About the KD-HDSW2x1Pro; KD-HDSW3x1Pro; KD-HDSW4x1Pro Digital switching of multiple (2, 3, or 4) HDMI inputs to one (1) HDMI output Supports all SD, HD, and VESA (VGA, SVGA, XGA, WXGA, SXGA, UXGA) resolutions up to 1080p (60Hz & 50Hz) SD & HD: 480i, 480p, 720p, 1080i, 1080p VESA: From 640x480p up to 1920x1200p EDID Control featuring 12 internal library settings or auto EDID detection from display EDID and HDCP Transparency between sources and display Can de-embed audio from the HDMI input and send it to external digital or analog audio outputs Supports signal rates up to 10.2 Gb per second Supports HDMI and DVI-D Supports CEC Compliant with all HDMI versions and HDCP copyright protection Input and Output status indicated by LED lights Firmware upgradable Rack mountable Advanced HDMI Features 3D Capability to pass 3D stereoscopic signal formats Accessories External power supply: 5V 2A HDMI Lacing Clips Rack Ears Operating Instructions Warranty Card

6 2 Quick Setup Guide KD-HDSW4x1Pro Serial IR RS-232 Step 1: Find a safe and convenient location to Optical mount IR or place your KD-HDSW unit Step 2: Begin with the KD-HDSW unit and all input/output devices turned off with power cables removed EDID Control Step 3: Connect your HDMI or DVI-D source devices to the input ports of your KD-HDSW unit Step 4: Connect your HDMI or DVI-D display to the output port of your KD-HDSW unit Step 5: Connect the desired IR or RS-232 control inputs to your KD-HDSW unit Step 6: Be sure the Operation Mode Switch is set to the Normal position *To connect DVI, use HDMI to DVI adapters Step 7: Connect power to the KD-HDSW unit Step 8: Power on input/output devices Satellite Box HDMI/DVI * Cable Box HDMI/DVI * KD-HDSW4x1Pro Serial IR RS-232 DVD Player HDMI/DVI * EDID Control Blu-Ray HDMI/DVI * Rcvr. Plasma TV HDMI/DVI * HDMI/DVI *To connect DVI, use HDMI to DVI adapters Speakers Sub-Woofer Speakers Note: No signal conversion is done on the KD-HDSW2x1Pro; KD-HDSW3x1Pro; KD-HDSW4x1Pro. If input signal is HDMI output signal will be HDMI. If input signal is DVI output signal will be DVI. Laptop KD-HDSW4x1Pro Serial IR RS-232

7 EDID Control 3 *To connect DVI, use HDMI to DVI adapters Installation and Operation Before permanently securing the unit for final installation of cabling behind walls or ceilings, test for proper operation of the unit and the cables in your system. It is recommended that you leave enough ventilation space to provide sufficient airflow and cooling, especially if leaving the unit powered at all times. An optional HDMI cable clip (included) allows for a secure HDMI cable connection to be made to the rear of the unit and helps defeat intermittent KD-HDSW4x1Pro or complete Serial signal IR loss due to poor connection. Active Input / Output LED Indicators RS-232 Your KD-HDSW unit may be controlled Optical via IR the pushbutton on the front of the unit. Select your desired input by depressing the Input Select button. The front LED indicators (1, 2, 3, 4) EDID Control correspond to the selected input. Rcvr. Plasma TV DVI Applications for KD-HDSW Pro Series KD-HDSW Pro Distribution Amplifiers can also be used with DVI-D sources and displays. For *To connect DVI, use HDMI to DVI adapters Speakers Sub-Woofer Speakers these applications, use DVI to HDMI adapters. Note that while HDMI supports both video and audio over an HDMI cable, DVI-D supports only video. Desktop PC DVI Video* Laptop DVI Video* KD-HDSW4x1Pro Serial IR Plasma TV RS-232 DVI Video* Desktop PC DVI Video* EDID Control DVI Laptop DVI Video* *To connect DVI, use HDMI to DVI adapters

8 4 IR Remote Control The KD-HDSW can also be operated using the IR remote control provided with your unit. The KD-HDSW switcher features IR sensors on the front and rear of the unit for reception of the IR signals. Power On Power Off Power On Power Off Input Select Auto Input Select Input Select Scroll Down Numeric Keypad Used in addressable mode for specifying unit s address Input Auto Device Select R R2 Input Select Scroll Up R1, R2, R3 Reserved for future use R3 0 Serial IR & IR Emitter Control The Serial IR port requires the use of a Male 3.5mm Mono cable (not included) with the IR command signal being carried on the Tip of the input inserted into the KD-HDSW unit. The location of the IR signal may vary by control system used. Please verify the location of the IR signal with your control system. Ground Signal When using the IR Emitter / IR Extender (sold separately), the IR Emitter must be mounted over the IR Sensor on the KD- HDSW unit. It is recommended that the rear IR sensor of the KD-HDSW unit be utilized for these applications. One end of the cable is connected to the IR Receiver / Master Controller / IR Extender / IR Connecting Block, while the other end is mounted over the IR Sensor of the KD-HDSW unit.

9 5 EDID Control Settings At times, your HDMI sources and display may not synchronize properly. This is when EDID* control should be utilized. KD-HDSW Pro Switchers feature an internal library of EDID settings to ensure your HDMI source s output is compatible with the display devices. Please reset the unit by either unplugging and plugging the HDMI connections, or via a power cycle for the new settings to take effect. Rotary EDID Settings (Default EDID: 0): Rotary EDID Control Switch KD-HDSW2x1Pro EDID Settings 0 Copy EDID from HDMI Output i, 2Ch i, Dolby/DTS i, HD p, 2ch p, Dolby/DTS p, HD 7 3D, 2ch 8 3D, Dolby/DTS D, HD A 1280x1024 DVI B 1920x1080 DVI C 1920x1200 DVI D 1080p, 2Ch E 1080p, 2Ch F 1080p, 2Ch KD-HDSW3x1Pro EDID Settings 0 Copy EDID from HDMI Output i, 2Ch i, Dolby/DTS i, HD p, 2ch p, Dolby/DTS p, HD 7 3D, 2ch 8 3D, Dolby/DTS D, HD A 1280x1024 DVI B 1920x1080 DVI C 1920x1200 DVI D 1080p, 2Ch E 1080p, 2Ch F 1080p, 2Ch KD-HDSW4x1Pro EDID Settings 0 Copy EDID from HDMI Output i, 2Ch i, Dolby/DTS i, HD p, 2ch p, Dolby/DTS p, HD 7 3D, 2ch 8 3D, Dolby/DTS D, HD A 1280x1024 DVI B 1920x1080 DVI C 1920x1200 DVI D 1080p, 2Ch E 1080p, 2Ch F 1080p, 2Ch Example of EDID Auto Select: If one of your system s displays supports 1080p and the second display only supports up to 1080i (does not support 1080p), then the highest common EDID format supported is 1080i. By choosing the Auto Select EDID Setting, your KD-HDSW Pro unit will inform your source device to output 1080i in order to ensure all displays receive a supported signal. * EDID (Extended display identification data) is a data structure provided by a display to describe its capabilities to a source device.

10 6 External Outputs Analog audio output via 3.5mm stereo phone jack 2 channel analog audio output from the selected HDMI input source Converts only 2 ch. PCM audio from the HDMI input to 2 channel analog audio output Only supports 2 ch. PCM audio, not multi-channel PCM, Dolby, DTS, HD audio Digital audio output via Coax/RCA Digital audio output from the selected HDMI input source Uses SPDIF format Supports 2 ch. PCM, Dolby, DTS; does not support multi-channel PCM or HD audio Digital audio output via Optical Digital optical audio output from the HDMI input Uses SPDIF format Supports 2 ch. PCM, Dolby, DTS; does not support multi-channel PCM or HD audio RS-232 Commands and Protocol KD-HDSW Pro units are compatible with all Control Systems, such as Compass Control, AMX, Control4, Crestron, RTI, Universal Connect your Control System s Master Controller to the KD-HDSW Pro unit using the RS-232 port. Follow all instructions provided with your control system. RS-232 Protocol: Baud Rate = bits per second Data Bits = 8 / Stop Bits = 1 Parity = None Flow Control = None All RS-232 commands must be in lower case letters Command must be terminated with a carriage return RS-232 Command Description Azz All Commands may have Prefix System Address zz=[01-99] H Help PF Power Off PN Power ON STA Show Global System Status Video Output Setup Commands: yy = [01-04] (A=All) SPO SIyy Set Output to Video Input yy SPO ON/OFF Set Output ON/OFF Output Setup Commands: [E=Enable, D=Disable] SPO AA E/D Enable/Disable External Analog Output SPO DA E/D Enable/Disable External Digital Output

11 7 System Address Setup Command: xx = [00-99], 00 = Single SPC Axx Set System Address to xx System Control Setup Commands: SPC AS ON/OFF Set Auto Sensing Mode ON/OFF SPC FB E/D Enable/Disable Front Panel Buttons SPC DF Reset to Factory Defaults Using ias Intelligent Auto Sense Intelligent Auto Sense (ias ) automatically switch inputs when Hot Plug Detect signal becomes active on an input. ias can be enabled and disabled via IR or RS-232 control. Please note that many common HDMI sources, such as a cable or satellite boxes, will emit Hot Plug Detect signals when in stand-by mode and may prevent full functionality of ias. When the blue Auto button on the IR remote is pressed or the SPC AS ON RS-232 command is sent, ias will be activated on the KD-HDSW Pro unit. Specifications Inputs 4/3/2 HDMI Connectors Outputs 1 HDMI Connector Bandwidth TMDS bandwidth 10.2 Gb/s HDMI Compliance All HDMI Versions and HDCP. Link Single Link: 1080p/60, 12 bit color depth, 1920x1200 max. Deep Color Support Digital video formats in Deep Color Mode at up to 12 bits/color Lossless Compressed Dolby TrueHD, Dolby Digital Plus and DTS -HD Master Digital DDC Signal (Data) Input DDC Signal: 5 Volts p-p (TTL) HDMI Video/ Signal Input Video Signal: 1.2 Volts p-p HDMI Connector HDMI Connector: Type A, 19 Pin Female I2C Communication EDID and HDCP Bi-Directional Transparency from Display to Source EDID Control Active outputs connected via HDMI, or from internal library of default 12 EDID settings Control For RS-232 Db9 Female connector for Tx, Rx and ground. For IR two optical windows and wired 3.5 mm female mini-stereo connector. Push button and top LED s. Power Source 5 Volt 2 Amp, VAC, Hz Dimensions W=8.5, H=1.75, D=4 Weight 2 Lbs

12 8 Important Product Warnings: 1. Connect all cables before providing power to the unit. 2. Test for proper operation before securing unit behind walls or in hard to access spaces. 3. If installing the unit into wall or mounting bracket into sheet-rock, provide proper screw support with bolts or sheet-rock anchors. Safety Instructions: Please be sure to follow these instructions for safe operation of your unit. 1. Read and follow all instructions. 2. Heed all warnings. 3. Do not use this device near water. 4. Clean only with dry cloth. 5. Install in accordance with the manufacturer s instructions. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 7. Only use attachments/accessories specified by the manufacturer. 8. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way including: Damage to the power supply or power plug Exposure to rain or moisture Power Supply Use: You MUST use the Power Supply provided with your unit or you VOID the Key Digital Warranty and risk damage to your unit and associated equipment.

13 9 How to Contact Key Digital System Design Group (SDG) For system design questions please contact us at: Phone: Key Digital Trainings For questions about Key Digital Trainings please contact us at: Phone: Customer Support For customer support questions please contact us at: Phone: Technical Support For technical questions about using Key Digital products, please contact us at: Phone: Marketing and Public Relations: For marketing and public relations information, please contact us at: Phone: Repairs and Warranty Service Should your product require warranty service or repair, please obtain a Key Digital Return Material Authorization (RMA) number by contacting us at: Phone: rma@keydigital.com Feedback Please any comments/questions about the manual to: customersupport@keydigital.com Warranty Information All Key Digital products are built to high manufacturing standards and should provide years of trouble-free operation. They are backed by a limited three-year parts and labor warranty.