ICP DAS New Members in I/O Cards (May. 2010) 封面 待設計

Transcription

1 ICP DAS New Members in I/O Cards (May. ) 封面 待設計

2 Programmable Device Servers (Serial-to-Ethernet) Overview ICP DAS provides SDK and drivers for I/O cards to support various OS such as Linux, DOS, Windows 98/NT4/00, and -/64-bit Windows XP///Vista/7. The Windows SDK for I/O cards contain DLL (Dynamic Link Library) file, ActiveX (OCX) control components and several sample programs with source code written in Microsoft Visual C++, Visual Basic, Borland C++ Builder, Delphi, VB.NET and C#.NET. By using the SDK and sample programs, no more complex hardware-register-based operations are required at all, and users can develop their application programs easily and quickly. The UniDAQ is the new generation of Windows SDK that supports most I/O cards of ICP DAS, and users can then use the universal software interface to access these cards. The UniDAQ SDK supports -bit and 64-bit Windows, and also provides sample programs with source code for several programming languages. The NI LabVIEW is a graphical programming environment used to develop sophisticated measurement, test, and control systems using intuitive graphical icons and wires that resemble a flowchart. It is scalable across multiple operating systems and offers hundreds of built-in libraries. The ICP DAS UniDAQ SDK also supports a toolkit for LabVIEW platform. Users can develop their I/O card applications quickly and easily in LabVIEW with the UniDAQ LabVIEW toolkit and sample programs. The advantage of supporting most of the ICP DAS PCI I/O cards comes from the UniDAQ SDK also can help users to transfer their applications to different PCI I/O cards smoothly and quickly. Overview -- ICP DAS CO., LTD Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems

3 ICP DAS New Members in I/O Cards PCI Express x, Plug & Play Digital I/O I/O Input Logic Low Power Consumption Storage Temperature PA_0 PA_ PA_2 PA_3 PA_4 PA_5 PA_6 PA_7 PC_0 PC_ PC_2 PC_3 PC_4 PC_5 PC_6 PC_7 Vcc 3 2 PEX-D48 PCI Express, 48-ch OPTO- Compatible DIO Board 48-ch, 5 V TTL compatible 0.8 V max V - ~ +70 C Output Source Current Output Sink Current Input Logic High 2.4 V min. Programmable Interrupts 4 PCI Express x s CN Vcc PB_0 PB_ PB_2 PB_3 PB_4 PB_5 PB_6 PB_7 Connectors Output Sink Current Humidity ma max. 64 ma max. Female DB- x 50-pin Male box header x 0 ~ +60 C 5 ~ 85% RH, non-condensing CN2, CN3, CN4, CN5, CN6 and CN7 Vcc PA_0 PA_ PA_2 PA_3 PA_4 PA_5 PA_6 PA_7 PB_0 PB_ PB_2 PB_3 PB_4 PB_5 PB_6 PB_7 PC_0 PC_ PC_2 PC_3 PC_4 PC_5 PC_6 PC_7 48 buffered TTL digital I/O lines DIO response time is about μs ( MHz max.) Six 8-bit bi-direction I/O ports Emulate two industrial-standard 85 PPI ports (mode 0) D/I with pull-high and pull-low jumpers D/O with higher driving capability One -bit programmable internal timer One -bit event counter 4 Interrupt sources The PEX-D48 is the new generation product that ICP DAS provides to meet RoHS compliance requirement, and is designed as easy replacement for the PIO-D48/PIO-D48U. Users can replace the PIO-D48/PIO-D48U by the PEX-D48 directly without any software/driver modification. The PEX-D48 supports PCI Express bus and provides 48 TTL digital I/O lines. These lines are grouped into six 8-bit bi-direction ports. Every three 8-bit ports are named as port A (PA), port B (PB) and port C (PC) in a connector, and the port C can be split into 2 nibble-wide (4-bit) parts. All ports are configured as inputs upon power-up or reset. The PEX-D48 adds a Card ID switch for users to recognize the board by the ID via software when using two or more PEX-D48 cards in one computer. The pull-high/low jumpers allow user to predefine the DI status instead of floating when the DI channels are unconnected or broken. DOS Lib and TC/BC/MSC sample program (with source codes) Supports -bit and 64-bit Windows XP//Vista/7 VB/VC/Delphi/BCB/VB.NET/C#.NET sample programs with source codes Supports LabVIEW and Linux PEX-D48 CR PCI Express, 48-ch TTL DIO board (RoHS)?????????????????????????????? Overview Website: service@icpdas.com --2

4 PCI Express x interface Programmable Device Servers (Serial-to-Ethernet) Overview PEX-PRi PCI Express, -ch Isolated Digital Input and -ch Relay Output Board Digital Input Isolation Voltage 50 V (Photo-couple) p g Logic : AC/DC 5 ~ V Without Filter: 50 khz (Typical) Input Voltage (AC 50 ~ khz) Response Speed Programmable Interrupts Logic 0: AC/DC 0 ~ V With Filter: khz (Typical) Relay Output Operating Time ms (typical) Mechanical: 5,000,000 ops. Life Relay Type 8 SPDT, 8 SPST Release Time 7 ms (typical) Electrical: 0,000 ops. Contact Rating Power Consumption AC:0 V@0.5 A; DC: V@ A PCI Express x V Insulation Resistance Card ID Storage Temperature,000 Ω Yes (4-bit) 0 ~ +60 C -ch relay output, -ch isolated digital input 50 V isolated digital input Optional DC input filter Built-in AC (0 V max.) input filter 7 ms relay release time The PEX-PRi is a PCI Express card with programmable digital I/O interface. It provides photo couple digital inputs with 50 V isolation protection, allows the input signals to be completely floated to prevent the ground loops. It is also equipped with relay outputs for controlling ON/OFF of external devices, driving external relays or small power switches, and activating alarms... etc. The PEX-PRi is designed as easy replacement for the PISO-PR/PISO-PRU, and users can replace the PISO-PR/PISO-PRU with the PEX-PRi directly without any software/driver modification. Connectors Female DB- x, 40-pin box header x s Overview NO_0 COM_0 NC_0 NO_ COM_ NC_ NO_2 COM_2 NC_2 NO_7 COM_7 DIA_0 DIA_ DIA_2 DIA_3 DIA_4 DIA_5 DIA_6 DIA_ CON 2 3 NO_3 COM_3 NC_3 NO_4 COM_4 NO_5 COM_5 NO_6 COM_6 DIB_0 DIB_ DIB_2 DIB_3 DIB_4 DIB_5 DIB_6 DIB_7 NO_8 COM_8 NC_8 NO_9 COM_9 NC_9 NO_ COM_ NC_ NO_5 COM_5 DIA_8 DIA_9 DIA_ DIA_ DIA_ DIA_3 DIA_4 DIA_ CON NO_ COM_ NC_ NO_ COM_ NO_3 COM_3 NO_4 COM_4 DIB_8 DIB_9 DIB_ DIB_ DIB_ DIB_3 DIB_4 DIB_5 - - DOS Lib and TC/BC/MSC sample program (with source codes) Supports -bit and 64-bit Windows XP//Vista/7 VB/VC/Delphi/BCB/VB.NET/C#.NET sample programs with source codes Supports LabVIEW and Linux PEX-PRi CR PCI Express, -ch Isolated Digital Input, -ch Relay Output Board. Includes one CA-47W cable and two CA-40 D-Sub connectors. --3 ICP DAS CO., LTD Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems

5 ICP DAS New Members in I/O Cards PCI Express x interface PEX-DA4 / DA8 / DA PCI Express, 4-bit 4-/8-/-ch Analog Output Board Analog Outputs Output Range Digital Inputs Digital Outputs Response Speed s IO_5 IO_4 IO_3 IO_ IO_ IO_ IO_9 IO_8 A. IO_7 IO_6 IO_5 IO_4 A. IO_3 IO_2 IO_ IO_0 3 2 CON VO_5 VO_4 VO_3 VO_ A. VO_ VO_ VO_9 VO_8 A. VO_7 VO_6 VO_5 VO_4 A. VO_3 VO_2 VO_ VO_0 DO 0 DO 2 DO 4 DO 6 DO 8 DO DO DO 4 +5V DI 0 DI 2 DI 4 DI 6 DI 8 DI DI DI 4 +5V CON CON2 4 4 DO DO 3 DO 5 DO 7 DO 9 DO DO 3 DO 5 +V DI DI 3 DI 5 DI 7 DI 9 DI DI 3 DI 5 +V 4-, 8- or -ch 4-bit analog output Voltage output: +/- V Current output: 0 ~ ma (sink) Double-buffered D/A latch -ch 5 V TTL D/I, -ch 5 V TTL D/O D/I with pull-high and pull-low jumpers The PEX-DA4 / DA8 / DA series analog output board supports PCI Express interface. It is equipped with 4-bit 4/8/ analog output channels, and each of the D/A channels features double-buffered latch. For the PEX-DA series, its voltage output range is from - V to + V, and the current output range is from 0 to ma. In addition, PEX-DA series also features the following advantages: Accurate and easy-to-use calibration: ICP DAS provides the software calibration, so that no jumpers and trim-pots are required anymore. The calibration data is saved in EEPROM for long-term use. Individual channel configuration: Each channel can be individually configured as voltage output or current output. Card ID: The PEX-DA series adds a Card ID switch for users to recognize the board by the ID via software when using two or more PEX-DA cards in one computer. The PEX-DA series is designed as easy replacement for the PIO-DA series, and users can replace the PIO-DA series by PEX-DA series directly without any software/driver modification. 4/8/-ch +/- V, 0 ~ ma -ch, 5 V/TTL -ch, 5 V/TTL.0 MHz (Typical) PCI Express x Resolution Output Driving Input Voltage Output Voltage 4-bit +/- 5 ma Accuracy Slew Rate Logic 0: 0.8 V max., Logic : 2.0 V min. Logic 0: 0.4 V max., Logic : 2.4 V min. 0.0% of FSR ± 2 C, ± V 0.7 V/μs Response Speed Output Capability DOS Lib and TC/BC/MSC sample program (with source codes) Supports -bit and 64-bit Windows XP//Vista/7 VB/VC/Delphi/BCB/VB.NET/C#.NET sample programs with source codes Supports LabVIEW and Linux PEX-DA4 CR PEX-DA8 CR PEX-DA CR.0 MHz (Typical) Card ID Yes (4-bit) Connectors Female DB- x, -pin box header x 2 Sink: V, Source: V PCI Express, 4-ch Analog Output board (RoHS). Includes one CA-40 D-Sub connector. PCI Express, 8-ch Analog Output board (RoHS). Includes one CA-40 D-Sub connector. PCI Express, -ch Analog Output board (RoHS). Includes one CA-40 D-Sub connector.?????????????????????????????? Overview Website: service@icpdas.com --4

6 -ch S.E./-ch Diff. analog input Programmable Device Servers (Serial-to-Ethernet) Overview Overview PCI-8LU / PCI-8LU Universal PCI, 0 ks/s, /-ch -bit or -bit A/D, 2-ch -bit D/A and -ch Programmable DIO Board Analog Input Sampling Rate Analog Output Output Range Programmable Digital I/O s D. Da2 out AI_3 AI_ AI_ AI_ AI_ AI_ AI_ AI_ AI_ AI_ AI_2 AI_ AI_9 AI_ AI_7 AI_ 3 2 single-ended/ differential 0 ks/s. max. FIFO Size 2 CON3 ±5 V, ± V, 0 ~ V, 0 ~ 5 V 3.3 V/5 V Universal PCI, -bit Ext Trg Da out A. AI_5 AI_4 AI_3 AI_ AI_ AI_ AI_9 AI_8 AI_7 AI_6 AI_5 AI_4 AI_3 AI_2 AI_ AI_0 Resolution Compatibility 892 samples -bit 5 V/TTL Resolution Accuracy Accuracy Slew Rate Output Capability -bit (PCI-8LU) / -bit (PCI-8LU) 0. % of FSR ± C, ± V ± 6 LSB 8. V/μs -bit 0 ks/s high-speed A/D for PCI-8LU -bit 0 ks/s high-speed A/D for PCI-8LU 8K-sample hardware FIFO Supports software-trigger and pacer-trigger Programmable low gain:, 2, 4, 8 Built-in MagicScan controller 2-ch -bit analog output -ch programmable DIO D/I with pull-high and pull-low jumpers DO with status read back function The PCI-8LU/8LU is a multi-function card that providing high-speed analog and digital I/O functions. It features a continuous, 0 ks/s -bit or -bit resolution A/D converter, 8K-sample hardware FIFO, 2-ch -bit D/A converter, and -ch programmable digital I/O with DO read back. The PCI-8LU/8LU provides either -CH single-ended or -CH differential analog inputs which are jumper selectable, and is equipped with a high speed PGA featuring programmable gain (, 2, 4 or 8). The PCI-8LU/8LU has a Card ID switch for users to recognize the board by the ID via software when using two or more PCI-8LU/8LU cards in one computer. The pull-high/low jumpers of the card allow user to predefine the DI status instead of floating when the DI channels are unconnected or broken. The A/D channel scan function of the PCI-8LU/8LU is so amazing, we call it MagicScan. The MagicScan controller takes out most works of getting A/D value such as selecting channel, setting gain, settling time, triggering ADC and getting data. With the built-in MagicScan and interrupt features, it is effectively off-loading your system CPU from the job. Even in channel scan mode, it can have different gain code for each channel, and the sampling rate can still reach 0 ks/s totally. The PCI-8LU/8LU is suitable for high end applications. DOS Lib and TC/BC/MSC sample program (with source codes) Supports -bit and 64-bit Windows XP//Vista/7 VB/VC/Delphi/BCB/VB.NET/C#.NET sample programs with source codes PCI-8LU CR PCI-8LU CR Output Driving Sink: V; Source: V ± 5 ma Card ID Yes (4-bit) Connectors Female DB- x, -pin box header x 2 PB 0 PB 2 PB 4 PB 6 PB 8 PB PB PB 4 +5V PA 0 PA 2 PA 4 PA 6 PA 8 PA PA PA 4 +5V CON CON2 4 4 PB PB 3 PB 5 PB 7 PB 9 PB PB 3 PB 5 +V PA PA 3 PA 5 PA 7 PA 9 PA PA 3 PA 5 +V Universal PCI, 0 ks/s, /-ch -bit Analog Input, 2-ch -bit Analog Output and -ch Programmable DIO.(RoHS). Includes one CA-40 D-Sub connector. Universal PCI, 0 ks/s, /-ch -bit Analog Input, 2-ch -bit Analog Output and -ch Programmable DIO.(RoHS). Includes one CA-40 D-Sub connector. --5 ICP DAS CO., LTD Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems

7 ICP DAS New Members in I/O Cards Digital Input Compatibility Handshaking Signals I_REQ input, I_ACK output, I_TRG input Digital Output Output Capability Transfer Speed s I_TRG DO_5 DO_4 DO_3 DO_ DO_ DO_ DO_9 DO_8 DO_7 DO_6 DO_5 DO_4 DO_3 DO_2 DO_ DO_0 3 2 PCI-D64HU Universal PCI, 40 MB/s High-Speed -ch D/I and -ch D/O Board The PCI-D64HU is a high-speed digital I/O card consisting of digital input channels and digital output channels. High-performance designs make this card perfect for high-speed data transfer and pattern generation applications. The PCI-D64HU performs high-speed data transfer by bus-mastering DMA via -bit PCI bus. The maximum data transfer rate can be up to 40 MB per second. Several digital I/O transfer modes are supported, such as direct programmed I/O control, timer pacer control, external clock mode and handshaking mode. The PCI-D64HU also features programmable digital filter for all input signals including handshaking and trigger signals. The PCI-D64HU is a reliable and cost-effective connection interface that works on your computer system to control high-speed peripherals. Sink: V; Source: V 40 MB/sec for DI and DO simultaneously (max.) CON I_REQ I_ACK +5V DI_5 DI_4 DI_3 DI_ DI_ DI_ DI_9 DI_8 DI_7 DI_6 DI_5 DI_4 DI_3 DI_2 DI_ DI_0 Compatibility 5 V/TTL 5 V/TTL Input Voltage Output Voltage Handshaking Signals -ch 5 V TTL digital input -ch 5 V TTL digital output 2-ch bus mastering scatter/gather DMA Data transfer rate up to 40 MB/s for each DMA channel Data transfer modes: Direct program control, Internal timer pacer External clock (D/I only), Handshaking On board k/2 k DWORD FIFO for DI/DO respectively DO FIFO supports ring buffer mode No bus loading in repetitive pattern generation application Logic 0: 0.8 V max.; Logic : 2.0 V min. Logic 0: 0.55 V max.; Logic : 2.0 V min. O_REQ output, O_ACK input, O_TRG output On Board FIFO Size k DWORD (-bit) for DI; 2 k DWORD (-bit) for DO Size in Ring Buffer Mode 2 ~ 2 k DWORD (-bit), DO only Type Universal PCI, -bit, MHz Connectors Female DB- x, 40-pin Box header x Power Consumption 0 +5 V typical (output no load) O_TRG DO_3 DO_ DO_ DO_ DO_ DO_ DO_ DO_ DO_ DO_ DO_2 DO_ DO_9 DO_ DO_7 DO_ CON O_REQ O_ACK +5V DI_3 DI_ DI_ DI_ DI_ DI_ DI_ DI_ DI_ DI_ DI_2 DI_ DI_9 DI_ DI_7 DI_ Supports Windows 00/XP//Vista/7 VB/VC/BCB sample programs with source code Universal PCI, 40 MB/s High-speed -ch DI and -ch DO (RoHS). PCI-D64HU CR Includes one CA-47W cable and two CA-40 D-Sub connectors.?????????????????????????????? Overview Website: service@icpdas.com --6

8 Supports 3.3 V/5 V PCI bus, Plug and Play Programmable Device Servers (Serial-to-Ethernet) Overview VXC-AU / VXC-iAU / VXC-42AU / VXC-42iAU Universal PCI, 2-Port RS-2 or RS-4/485 Communication Board Built-in COM-Selector Provides 2 RS-2 ports for VXC-AU/VXC-iAU Provides 2 RS-4/485 ports for VXC-42AU/VXC-42iAU 8-byte Hardware FIFO for Each Port +/-4 kv ESD Protection for VXC-iAU/VXC-42iAU 00 VDC Isolation for VXC-iAU/VXC-42iAU The VXC-AU/VXC-iAU/VXC-42AU/VXC-42iAU communication card provides 2 RS-2 or RS-4/485 serial ports. Each port supports for speed up to 50 bps and can work for full-duplex communication. Users may specify a COM port number manually by setting COM-Selector (DIP switch), or let the driver choose an available number automatically. The driver provides a maximum of 8 KB software buffer for each COM port under Windows. It's practical for large file transmission. In harsh industrial environments, the on board ESD protection component diverts the potentially damaging charge away from sensitive circuit and protects the computer and equipment from being damaged by high potential voltage. The VXC-iAU/VXC-42iAU offers photo isolation to protect your computer and equipment against damages in harsh environment. The built-in photo coupler can help cutting down on ground loops, common mode voltages and block voltage spikes, provide electrical isolation, and offer significant protection from serious over-voltage conditions in one circuit affecting the other. The serial communication card are designed for use with intelligent devices like bar code reader, serial printers, intelligent sensors, instrumentation equipment, computers and almost any device with an RS-2 or RS-4/485 port. Serial Port COM/2 UART Stop Bit ESD Protection Power Consumption 9-Wire RS-2 for VXC-AU/VXC-iAU Selectable 8-Wire RS-4 or 2-Wire RS-485 for VXC-42AU/VXC-42iAU C950 compatible Baud Rate 50 ~ 50 bps Data Bit 5, 6, 7, 8,.5, 2 Parity None, Even, Odd, Mark, Space FIFO Internal 8 bytes +/- 4 kv for VXC-iAU/VXC-42iAU Isolation 00 VDC for VXC-iAU/VXC-42iAU 3.3 V/5 V, MHz, -bit COM-Selector Yes (8-bit DIP switch) Connector Male DB-9 x 2 VXC-AU: 0 5 V ;VXC-iAU: V; VXC-42U: 0 5 V ;VXC-42iU: V s Drivers for -bit Windows 00/XP//Vista/7 Drivers for 64-bit Windows XP//Vista/7 Overview DTR TxD RxD DCD RI CTS RTS DSR 0 RS-2 Male DB-9 Connector /VEE CTS-(A) RxD-(A) CTS+(B) RxD+(B) RTS+(B) TxD+(B)/Data+(B) RTS-(A) TxD-(A)/Data-(A) 0 RS-4/485 Male DB-9 Connector Universal PCI, 2-Port RS-2 Communication VXC-AU CR Board (RoHS) Universal PCI, 2-Port Isolated RS-2 VXC-iAU CR VXC-42AU CR Universal PCI, 2-Port RS-4/485 VXC-42iAU CR Universal PCI, 2-Port Isolated RS-4/ ICP DAS CO., LTD Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems

9 ICP DAS New Members in I/O Cards VXC versions supports 3.3 V/5 V PCI bus VEX-4 / VEX-4i / VXC-4U / VXC-4iAU PCI Express / Universal PCI, 4-Port RS-2 Communication Board UART Stop Bit ESD Protection Power Consumption C950 compatible,.5, 2 +/- 4 kv (VEX-4i/VXC-4iAU) Baud Rate Parity Isolation VEX versions supports PCI Express bus Built-in COM-Selector Provides 4 RS-2 ports 8-byte Hardware FIFO for Each Port +/-4 kv ESD Protection for VEX-4i/VXC-4iAU 00 VDC Isolation for VEX-4i/VXC-4iAU Short Card Design The VEX-4/VEX-4i/VXC-4U/VXC-4iAU communication card provides 4 RS-2 serial ports. Each port supports for speed up to 50 bps and can work for full-duplex communication. Users may specify a COM port number manually by setting COM-Selector (DIP switch), or let the driver choose an available number automatically. The driver provides a maximum of 8 KB software buffer for each COM port under Windows. It's practical for large file transmission. In harsh industrial environments, the on board ESD protection component diverts the potentially damaging charge away from sensitive circuit and protects the computer and equipment from being damaged by high potential voltage. The VEX-4/VXC-4iAU offers photo isolation to protect your computer and equipment against damages in harsh environment. The built-in photo coupler can help cutting down on ground loops, common mode voltages and block voltage spikes, provide electrical isolation, and offer significant protection from serious over-voltage conditions in one circuit affecting the other. The serial communication card are designed for use with intelligent devices like bar code reader, serial printers, intelligent sensors, instrumentation equipment, computers and almost any device with an RS-2 port. Serial Port COM~4 Data Bit FIFO Connector 9-Wire RS-2 5, 6, 7, 8 Internal 8 bytes s VEX versions: PCI Express x; VXC versions: 3.3 V/5 V, MHz, -bit Female DB- x DCD3 CTS3 RxD3 RI4 DTR4 DSR4 RTS4 TxD4 DCD2 RI DTR DSR RTS 0 CTS2 3 RxD TxD 9 RI3 2 DTR3 DSR3 RTS3 TxD3 DCD4 CTS4 RxD4 RI2 DTR2 3 DSR2 RTS2 TxD2 DCD CTS RxD RS-2 Female DB- Connector COM-Selector 50 ~ 50 bps None, Even, Odd, Mark, Space 00 VDC (VEX-4i/VXC-4iAU) VEX-4: 0 5 V; VEX-4i: V; VXC-4U: 0 5 V; VXC-4iAU: V Yes (8-bit DIP switch) Drivers for -bit Windows 00/XP//Vista/7 Drivers for 64-bit Windows XP//Vista/7 PCI Express, 4-Port RS-2 Communication VXC-4 CR Board (RoHS) PCI Express, 4-Port Isolated RS-2 VXC-4i CR Universal PCI, 4-Port RS-2 Communication VXC-4U CR Board (RoHS) Universal PCI, 4-Port Isolated RS-2 VXC-4iAU CR?????????????????????????????? Overview Website: service@icpdas.com --8

10 VXC versions supports 3.3 V/5 V PCI bus Programmable Device Servers (Serial-to-Ethernet) Overview VEX-44 / VEX-44i / VXC-44U / VXC-44iU PCI Express / Universal PCI, 4-Port RS-4/485 Communication Board ESD Protection Power Consumption 5, 6, 7, 8 +/- 4 kv (VEX-44i/VXC-44iU) UART Parity Isolation VEX versions supports PCI Express bus Built-in COM-Selector Provides 4 RS-4/485 ports 8-byte Hardware FIFO for Each Port +/-4 kv ESD Protection for VEX-44i/VXC-44iU 00 VDC Isolation for VEX-44i/VXC-44iU Short Card Design The VEX-44/VEX-44i/VXC-44U/VXC-44iU communication card provides 4 RS-4/485 serial ports. Each port supports for speed up to 50 bps and can work for full-duplex communication. Users may specify a COM port number manually by setting COM-Selector (DIP switch), or let the driver choose an available number automatically. The driver provides a maximum of 8 KB software buffer for each COM port under Windows. It's practical for large file transmission. In harsh industrial environments, the on board ESD protection component diverts the potentially damaging charge away from sensitive circuit and protects the computer and equipment from being damaged by high potential voltage. The VEX-44/VXC-44iU offers photo isolation to protect your computer and equipment against damages in harsh environment. The built-in photo coupler can help cutting down on ground loops, common mode voltages and block voltage spikes, provide electrical isolation, and offer significant protection from serious over-voltage conditions in one circuit affecting the other. The serial communication card are designed for use with intelligent devices like bar code reader, serial printers, intelligent sensors, instrumentation equipment, computers and almost any device with an RS-4/485 port. Serial Port COM~4 Baud Rate FIFO Connector Selectable 8-Wire RS-4 or 2-Wire RS ~ 50 bps Data Bit Internal 8 bytes VEX versions: PCI Express x; VXC versions: 3.3 V/5 V, MHz, -bit Female DB- x COM-Selector C950 compatible None, Even, Odd, Mark, Space 00 VDC (VEX-44i/VXC-44iU) Yes (8-bit DIP switch) VEX-44: 0 5 V; VEX-44i: V; VXC-44U: 0 5 V; VXC-44iU: V s Drivers for -bit Windows 00/XP//Vista/7 Drivers for 64-bit Windows XP//Vista/7 Overview TxD3-(A)/Data3-(A) /VEE3 CTS3+(B) TxD3+(B)/Data3+(B) CTS4-(A) RxD4-(A) RTS4-(A) RTS4+(B) RxD4+(B) TxD2-(A)/Data2-(A) /VEE CTS3-(A) RxD3-(A) RTS3-(A) RTS3+(B) RxD3+(B) TxD4-(A)/Data4-(A) /VEE4 CTS4+(B) TxD4+(B)/Data+(B) CTS2-(A) RxD2-(A) RTS2-(A) CTS2+(B) 3 RTS2+(B) TxD2+(B)/Data2+(B) 4 RxD2+(B) CTS-(A) 5 TxD-(A)/Data-(A) RxD-(A) /VEE RTS-(A) 7 CTS+(B) RTS+(B) TxD+(B)/Data+(B) RxD+(B) 9 RS-4/485 Female DB- Connector PCI Express, 4-Port RS-4/485 VEX-44 CR PCI Express, 4-Port Isolated RS-4/485 VEX-44i CR Universal PCI, 4-Port RS-4/485 VXC-44U CR Universal PCI, 4-Port Isolated RS-4/485 VXC-44iU CR --9 ICP DAS CO., LTD Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems

11 ICP DAS New Members in I/O Cards Universal PCI I/O Cards PISO-DAU / DA8U / DA4U Universal PCI, 4-bit /8/4-ch -type Isolated Analog Output Board 00 VDC bus-type isolation protection 00 VDC power isolation protection -/8-/4-ch, 4-bit analog output Voltage output: ± V Current output: 0 ~ ma (sink) Double-buffered D/A latch -ch 5 V TTL D/I and -ch 5 V TTL D/O D/I with pull-high and pull-low jumpers Two pacer timer interrupt sources Drop-in replacement for the PIO-DA/DA8/DA4 PCI-M5U Universal PCI, 5 KB Memory Board with DI / DO On-board 5 KB SRAM Two Li-batteries for battery-backup the data of SRAM LED indicators for low- and bad-battery status -ch 5 V TTL D/O -ch 5 V TTL D/I Supports -bit Windows XP/ /Vista/7 Supports VB/VC/Delphi/BCB/ VB.NET and C# Drop-in replacement for the PCI-M5 PCI-U / FU Universal PCI, -ch, -bit, 0 or 0 ks/s Multi-function Board -bit, 0 or 0 ks/s A/D converter S.E./ Diff. analog inputs Built-in MagicScan controller 8K-sample hardware FIFO External: Post-trigger, Pre-trigger and Middle-trigger Internal: -trigger and Pacer-trigger -ch 5 V TTL D/I and -ch 5 V TTL D/O Data transfer rate is up to 2. M words/s (max.) D/I with pull-high and pull-low jumpers Two -bit independent programmable DAC, 2 MHz throughput per channel (max.) Drop-in replacement for the PCI-/F ISO-PSW / PISO-PSWU ISA or Universal PCI, -ch Optical-Isolated D/I and -ch Optical-Isolated Open Collector Output Board Universal PCI (3.3 V/5 V) for PISO-PSWU ISA bus for ISO-PSW -ch optical-isolated digital input Input voltage up to VDC -ch optical-isolated open collector output 500 ma (8-ch) high-driving 0 ma (-ch) driving Current Sinking (NPN) Isolation Voltage: 50 V PCI-LU / HU Universal PCI, -ch, -bit, or 40 ks/s Multi-function Board -bit, or 40 ks/s A/D converter S.E./ Diff. analog inputs Built-in MagicScan controller K-sample hardware FIFO External: Post-trigger, Pre-trigger and Middle-trigger Internal: -trigger and Pacer-trigger -ch 5 V TTL D/I and -ch 5 V TTL D/O Data transfer rate is up to 2. M words/s (max.) D/I with pull-high and pull-low function Two -bit independent programmable DAC, 2 MHz throughput per channel (max.) Drop-in replacement for the PCI-L/H PCI-LU / HU Universal PCI, -ch, -bit, or 44 ks/s Multi-function Board -bit, S.E./ Diff. analog inputs or 44 ks/s A/D sampling rate Internal and external trigger -ch 5 V TTL D/I -ch 5 V TTL D/O D/I with pull-high and pull-low function Drop-in replacement for the PCI-L/ H Supports -bit and 64-bit Windows XP//Vista/7 Supports VB/VC/Delphi/BCB/VB.NET/C#.NET sample programs with source code?????????????????????????????? Overview Website: service@icpdas.com --

12 PIO-DAU / DA8U / DA4U Universal PCI, 4-bit /8/4-ch Analog Output Board PISO-DA2U Universal PCI, 2-ch Isolated Analog Output Board Programmable Device Servers (Serial-to-Ethernet) Overview -/8-/4-ch, 4-bit analog output Voltage output: ± V Current output: 0 ~ ma (sink) Two pacer timer interrupt sources Double-buffered D/A latch -ch D/I -ch D/O D/I with pull-high and pull-low function Drop-in replacement for the PIO-DA/DA8/DA4 PIO-D44U / D96U / D64U / D56U / D48U / DU Universal PCI, 44-/96-/64-/56-/48--ch 5 V TTL DIO Board 44-/96-/64-/56-/48-/-ch 5 V TTL DIO Emulate Industrial standard 85 PPI port (mode 0) (PIO-D44U/D96U/D56U/D48U/DU) High output driving capability (PIO-D44U/D96U/D56U/D48U/DU) Interrupt handing capability DIO response time is about 0.77 μs (.3 MHz max.) Drop-in replacement for the PIO-D44/D96/D64/D56/D48/D Two independent -bit analog outputs 00 VDC isolation protection (-Type and CH-CH) Unipolar or bipolar analog output Two pacer timer interrupt sources Double buffered D/A batch calibration The calibration data is fully stored in EEPROM Drop-in replacement for the PISO-DA2 PISO-PCU Universal PCI, -ch Optically Isolated D/I and -ch Optically Isolated Open Collector output Board -ch optically isolated digital input -ch optically isolated open collector output (Current Sinking, NPN type) 00 VDC isolation voltage Supports -bit and 64-bit Windows XP//Vista/7 Supports VB/VC/Delphi/BCB/VB.NET and C# Drop-in replacement for the PISO-PC Overview -bit, 0 or 0 ks/s A/D converter S.E./ Diff. analog inputs Built-in MagicScan controller 8K-sample hardware FIFO External: Post-trigger, Pre-trigger and Middle-trigger Internal: -trigger and Pacer-trigger -ch 5 V TTL D/I and -ch 5 V TTL D/O Data transfer rate is up to 2. M words/s (max.) D/I with pull-high and pull-low jumpers Two -bit independent programmable DAC 2 MHz throughput per channel (max.) Drop-in replacement for the PCI-/F -bit, S.E./ Diff. analog inputs or 44 ks/s A/D sampling rate Internal and external trigger -ch 5 V TTL D/I -ch 5 V TTL D/O D/I with pull-high and pull-low function Drop-in replacement for the PCI-L/H -- ICP DAS CO., LTD Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems