2.4 GHz WIRELESS B&W VIDEO SECURITY SYSTEM MODEL WL5230

Size: px

Start display at page:

Download "2.4 GHz WIRELESS B&W VIDEO SECURITY SYSTEM MODEL WL5230"

Dorthy Golden
5 years ago
Views:

2.4 GHz WIRELESS B&W VIDEO SECURITY SYSTEM MODEL WL5230 FOR MORE INFORMATION WWW.STRATEGICVISTA.

1 2.4 GHz WIRELESS B&W VIDEO SECURITY SYSTEM MODEL WL5230 FOR MORE INFORMATION Before operating the system, please read this manual thoroughly and retain it for future reference!!! This product broadcasts over public airwaves and its video and audio signals may be intercepted without your consent.

2 CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN.! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of two Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.! The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance-(servicing) instructions in the literature accompanying the appliance. THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ON THE BOTTOM OF THE SYSTEM. WARNING: To prevent fire or shock hazard, do not expose this appliance to rain, water, or wet locations. Do not insert any metallic object through the ventilation grills. FCC CLASS B NOTICE Note: This equipment has been tested and found to comply with the limits For a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, Uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help.

3 SAFETY INSTRUCTIONS IMPORTANT SAFEGUARDS All the safety and operating instructions should be read before the appliance is operated and retained for future reference. 1. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 2. FOLLOW INSTRUCTIONS - All operating instructions should be followed. 3. WATER AND MOISTURE - Do not use this video product near water for example, a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement. 4. POWER SOURCES - This product should be operated only from the type of power source indicated on the marking label. 5. OVERLOADING - Do not overload outlets and extension cords, which can result in a risk of fire or electric shock. 6. SERVICING - Do not attempt to service this product yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing or repairs to qualified service personnel. 7. DAMAGE REQUIRING SERVICE - Unplug this product from the wall outlet and refer servicing or repairs to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged. b. If liquid has been spilled or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. e. If the product has been dropped or the cabinet has been damaged. f. When the product exhibits a distinct change in performance. 8. REPLACEMENT PARTS - When replacement parts are required, be sure the service technician has used replacement parts that are specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 9. SAFETY CHECK - Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine if the video product is in proper operating condition. 10. An appliance and cart combination should be moved with care. Do not place this equipment on an unstable cart, stand, or table. The equipment may fall, causing serious injury to a child or adult, and serious damage to the equipment. Wall or shelf mounting should follow the manufacturer's instructions and should be done with a mounting kit approved by the manufacturer.

4 Congratulations on your purchase of the Lorex GHz Wireless 4-Channel B&W Observation System. This system has the capability of connecting up to four cameras, allowing you to view up to four different locations. The wireless camera included with this system provides of up to 300 Ft. of distance (open space). Other features integrated with this system include: listen-in audio, recording the picture to any VCR, selectable auto scanning or full screen option. It is the ideal security solution for protecting your office, home and valuables. To learn more about this product and for a complete listing of Lorex products, please visit us at: CHAPTER TABLE OF CONTENTS PAGE 1. CONTROLS AND FUNCTIONS MONITOR & 5 CAMERA INSTALLATION CAMERA SYSTEM OPERATION CONNECTING MONITOR TO A VCR TROUBLE SHOOTING OPTIONAL ACCESSORIES SPECIFICATIONS SYSTEM INCLUDES

5 MONITOR CONTROLS FRONT PANEL 7 BACK PANEL ) Power Button Pushing this button will turn the monitor ON/OFF. (Note: ensure this switch is set to the OFF position prior to plugging into an electrical outlet). 2) Volume Control Adjust switch to control volume sound, turn left/right to adjust volume. 3) Brightness Control Changes brightness of picture, turn left/right to adjust control. 4) Channel Button Push this button to view the desired channel. 5) Auto/Manual Button Use this button to manually rotate between camera locations or automatically switch between the different cameras, of up to 4. If you have fewer than four cameras, you can also set the system to scan between two or three locations: NOTE Your system is defaulted to automatically scan between 4 locations. To change this setting, proceed with the following. a) Auto Scanning: Setting Auto Scan to 3 or 2 locations i) Press and hold the Auto/Manual button for more than 2 seconds. All four LED lights on the front of the monitor will turn ON. ii) Continue to press and hold the Auto/Manual button. The channel 4 Led button will turn off. The system is now set to scan between three camera locations (channels 1-3). iii) Continue to press and hold the Auto/Manual button. The Channel 3 LED button will now be turned off. The system is now set to scan between two camera locations (channel 1-2). iiii) Continue to press and hold the Auto/Manual button to return to the four camera viewing option (all four LED lights will be illuminated). b) Auto and Manual Viewing Options: To manually view a specific camera location, press the Auto/Manual button. Press the Ch. Select key to view the desired camera location. Auto Mode is used when more than 1 camera is connected to the Video Security system. The system is preset to Manual Mode, with a default of 2 seconds. In Auto mode, the LED light will be ON. Press the Auto/Manual button to return to the Auto Mode feature. NOTE: In the event of a power failure, your system will automatically switch back to Channel 1. The user therefore will manually adjust to reflect the previous channel that was set prior to the power failure.

6 MONITOR CONTROLS (CONT D) c) Selectable Dwell Setting: This system provides you the option of three selectable dwell options (2, 5 and 10 seconds) when set to Auto Mode. NOTE Your system is preset to 2 second selection. To change this default setting, proceed with the following. Changing Dwell Mode i) Press and hold the CH select button. The LED button will turn on to indicate that it is set to 2 seconds. ii) Continue to press and hold the CH select button. The LED button will flash at a one second interval to indicate that it is now set to the 5 second interval. iii) Continue to press and hold the CH select button. The LED button will flash three times to indicate it is set to the 10 second interval. 6) Led Indicator Lights Shows system status. 7) 2.4 GHz Antenna High gain dipole antenna receives signal from the wireless camera 8) AC Input Jack Power source to the monitor. Connect one end of the AC Adapter to the monitor; the other end to an electrical outlet. 9) VCR Audio/Video Out Use with A/V cables (supplied) to connect to a recording device (eg. Time Lapse VCR). 10) Contrast Changes contrast of picture, turn left/right to adjust control. CAMERA CONTROLS (one camera included additional camera s sold separately) ) ON/OFF Power Switch Pressing this switch will turn the camera ON/OFF. (Note: ensure this switch is set to the OFF position prior to plugging into an electrical outlet. 2) Camera Lens Displays wide angle camera viewing (3.7mm lens) 3) Microphone Picks up sound around the camera. 4) AC Input Jack Power source to the camera. Connect one end of the AC Adapter to the camera; the other end to an electrical outlet. 5) Led Indicator Lights Shows system status. 6) Bracket Connects to camera for mounting on wall, ceiling or table. 7) 2.4 GHz Antenna High gain dipole antenna sends signal to the monitor. 8) Infra-red Emitters Ideal for low light viewing. 9) Battery Compartment Provides Battery option to the camera. Requires: AA Batteries (not included)

7 AC OR BATTERY OPTION This camera has both AC or Battery option. This will provide the user flexibility to move the camera from room to room. NOTE This camera can only be used with Alkaline AA Batteries. Do not use this system with re-chargeable batteries. 1) Ensure the power switch of the camera is turned OFF. 2) Insert 8 AA Alkaline batteries (not included) into the battery compartment. WARNING: TO PREVENT INJURY AND/OR DAMAGE TO THE UNIT, ENSURE THE BATTERIES ARE ALIGNED PROPERLY AND BATTERY TYPES ARE NOT MIXED. 3) Turn the camera ON. NOTE Ensure the camera s AC Power Adapter is not connected to the camera when utilizing Alkaline Batteries. CAMERA INSTALLATION 1. Attach the camera to the stand and firmly tighten the swivel. 2. Attach the stand base to the wall or ceiling where you want to install the camera. Locate a wall stud or ceiling joist and secure bracket using the supplied mounting screws. IMPORTANT NOTE: Keep camera installed away from direct sunlight. Also avoid places where humidity is high or unable to protect rain. The mounting bracket must be attached to a structural device such as a wall stud or ceiling after using suitable fastener.

8 OPERATION CONNECTING MONITOR TO A VCR Monitor VCR AC Adapter RCA Cables Connections Connect the supplied audio/video cable from the back of the monitor to the Audio/Video In of the VCR. Did You Know? You have the option of connecting this system to a Time Lapse VCR. A time lapse VCR provides you multiple recording options allowing you to record up to 40 days using a standard T120 tape. Refer to the optional accessories page for more details. TROUBLE SHOOTING If the system does not function properly, check the following points: CAUSES AND REMIDIES PROBLEM No Power (no picture/sound) Poor Reception Picture Flickering Picture to Bright, or too Dark Picture rolls and jumps or Scrambled picture CAMERA - AC Adapter not plugged in - Power Switch not turned On - AC Adapter not plugged in - Power Switch not turned On - Strong spot light in the field of view - Lighting source in the field of view - Adjust Antenna direction MONITOR - AC Adapter not plugged in - Power Switch not turned On - Monitor not turned On - Adjust Antenna direction - Improper Channel - Adjust Brightness control on monitor - Adjust Antenna direction FOR MORE INFORMATION Because our product is subject to continuous improvement, SVC reserves the right to modify product designs and specifications without notice and without incurring any obligation. E&OE

OPTIONAL ACCESSORIES The following accessories are available to add to

TIME LAPSE VCR NIGHTVISION Used to record key events.

Observation system cameras) 2.4 GHz WIRELESS CAMERA 2.

9 OPTIONAL ACCESSORIES The following accessories are available to add to your existing system. TIME LAPSE VCR NIGHTVISION Used to record key events. Select From a 40 hour real time or 960 Hour time lapse VCR Weatherproof Night vision accessory. Allows you to see in the dark up to distance (for use with Observation system cameras) 2.4 GHz WIRELESS CAMERA 2.4 GHz WIRELESS WEATHER RESISTANT CAMERA Accessory Wireless camera Use indoor/outdoor. 100ft transmission - open field TO ORDER THESE ACCESSORY ITEMS OR FOR A COMPLETE LINE OF ACCESSORIES

10 SPECIFICATIONS WIRELESS CAMERA Image sensor Lens Picture Elements Scanning system Battery Life Current Consumption Resolution Min. illuminations Video Output Gamma characteristics Auto Iris Microphone Operating temperature Power source Dimensions Weight B&W CMOS Camera F mm wide angle lens 320 H X 240 V 2:1 interlace 4 5 Hours (B&W) 230 ma 240 TV Lines 0 F Vp-p/75 Ohm 0.45 Electrical Auto Iris Shutter sensitivity :1/60-1/100,000 Electronic Condenser -14º to + 122º F (-10ºC to + 50 ºC) 12V DC Power Supply (incl.) 3 (W) x 5 (H) x 4 (D) 12 oz MONITOR Screen Size Output level Sensitivity Resolution Sound output Power Source: Output Input Power consumption Operating Temperature Dimensions Weight 5 diagonal 1.0Vp-p/75ohm (Video), 1.0Vp-p (Audio) -25dBm to -80dBm More than 280 lines 0.5 Watt. 13.8V DC 1000mA 120V AC 800 ma -14 to + 122º F (-10ºC to + 50 ºC) 5.5 (W) x 6.2 (H) x 8.5 (D) 3.5 Lbs. SYSTEM INCLUDES (This System may be purchased with one or more Camera s and/or Monitor alone) 5 B&W Monitor B&W Wireless Camera 2 AC Adapters English, French and Spanish Owners Manual Mounting Brackets & Mounting Screws RCA Cables