Industrial Switches. 9 Industrial. Industrial Switch, 5 Ports 100Base-TX 554 Industrial Switch, 8 Ports 100Base-TX 555

Size: px

Start display at page:

Download "Industrial Switches. 9 Industrial. Industrial Switch, 5 Ports 100Base-TX 554 Industrial Switch, 8 Ports 100Base-TX 555"

Darleen Gibbs
5 years ago
Views:

1 Industrial Switches Industrial Switch, Base- Industrial Switch, Base- Industrial Switch, Base-, Slots Base-FX Industrial Managed Switch, Base-, Slots Base-FX Industrial Eco Switch, Base- Industrial Eco Switch, Base- SFP Module,Base-FX, LC 0 Industrial Switches

-0 -Port BASE- Industrial Switch RPS ALM Primary Power LED Redundant Power LED Alarm LED port Mbps LED port LED ports () -0 -port 0/ Industrial Switch The -0 Industrial Switch is a -port 0/Base-

2 -0 -Port BASE- Industrial Switch RPS ALM Primary Power LED Redundant Power LED Alarm LED port Mbps LED port LED ports () -0 -port 0/ Industrial Switch The -0 Industrial Switch is a -port 0/Base- ETHERNET switch. The switch has a rugged housing, a redundant power supply and function monitoring with relay, making it ideal for a wide range of applications. Redundant DC power supply Wide supply voltage range: V... V DIP switch enables alarm functions Full compliance with IEEE0., 0.u stantards Non-blocking, store-and-forward switching Auto-negotiation on all 0/Base- ports Auto-MDI/MDIX (crossover) on all 0/Base- ports -Port BASE- Industrial Switch -0 x 0/Base- (RJ-) IEEE 0.u Base-; IEEE 0. 0Base-T Maximum length 0/Base-: m Supply voltage V... V DC (line length < m). W Energy consumption typ. ( V). W Operating temperature 0 C C Storage temperature -0 C C Relative air humidity (no condensation) % Dimensions (mm) W x H x L 0 x x 0 Height from upper-edge of DIN rail g Vibration resistance acc. to IEC 00-- Shock resistance acc. to IEC 00-- Degree of protection IP0 EMC -Immunity to interference acc. to EN 0-- (00) EMC -Emission of interference acc. to EN 0-- (00) Conformity marking r UL 0

3 -0 -Port BASE- Industrial Switch RPS ALM Primary Power LED Redundant Power LED Alarm LED port Mbps LED portlnk//act LED -0 0/ -port 0/ Industrial Switch The -0 Industrial Switch is an -port 0/Base- ETHERNET switch. The switch has a rugged housing, a redundant power supply and function monitoring with relay, making it ideal for a wide range of applications. Redundant DC power supply Large supply voltage range: V... V DIP switch enables alarm functions Full compliance with IEEE0., 0.u stantards Non-blocking, store-and-forward switching Auto-negotiation on all 0/Base- ports Auto-MDI/MDIX (crossover) on all 0/Base- ports -Port BASE- Industrial Switch -0 x 0/Base- (RJ-) IEEE 0.u Base-; IEEE 0. 0Base-T Throughputs,0/,00 packets per second (pps) to 0/ Mbps ports Maximum length 0/Base-: m Supply voltage V... V DC (line length < m). W Energy consumption typ. ( V). W Operating temperature 0 C C Storage temperature -0 C C Relative air humidity (no condensation) % Dimensions (mm) W x H x L 0 x x Height from upper-edge of DIN rail 0 g Vibration resistance acc. to IEC 00-- Shock resistance acc. to IEC 00-- Degree of protection IP0 EMC -Immunity to interference acc. to EN 0-- (00) EMC -Emission of interference acc. to EN 0-- (00) Conformity marking r UL 0

-0 -Port BASE- + -Slot BASE-FX Industrial Switch 0 0 RPS ALM OFF LINE -0 Primary Power LED Redundant Power LED Alarm LED port Mbps LED port LED 0/ Base- ports () Base-FX LC Fiber slots (SFP-type) ()

4 -0 -Port BASE- + -Slot BASE-FX Industrial Switch 0 0 RPS ALM OFF LINE -0 Primary Power LED Redundant Power LED Alarm LED port Mbps LED port LED 0/ Base- ports () Base-FX LC Fiber slots (SFP-type) () Fiber port Offline LED () Fiber port LED () 0 Fiber port Mbps LED () 0 0/ -port 0/+-port -FX Industrial Switch The -0 Industrial Switch is an -port 0/Base- with dual SFP Base-FX port (SFP modules are optional) ETHERNET switch. The switch has a rugged housing, a redundant power supply and function monitoring with relay, making it ideal for a wide range of applications. Redundant DC power supply Large supply voltage range: V... V DIP switch enables alarm functions Full compliance with IEEE0., 0.u stantards Non-blocking, store-and-forward switching Auto-negotiation on all 0/Base- ports Auto-MDI/MDIX (crossover) on all 0/Base- ports / Port BASE-/FX Industrial Switch -0 / Port BASE-/FX Industrial Switch T -0/ (Operating temperature -0 C C) Accessories SFP Module : 0nm, Base-FX Multi-mode LC, km SFP Module 0: 0nm, Base-FX Single-mode LC, 0 km SFP Module T: 0nm, Base-FX, Multi-mode, LC, km, (Operating temperature -0 C C) -0/ / /00-00 Conformity marking r UL 0 to 0 C (-0/00-000) ( for product variations upon request) x 0/Base- (RJ-); x SFP Base-FX Fiber IEEE 0.u Base-/FX; IEEE 0. 0Base-T Throughputs,0/,00 packets per second (pps) to 0/ Mbps ports Wavelength (optical fibers) depend on SFP module Maximum length 0/Base-: m; Fiber optic: up to 0 km Supply voltage V... V DC (line length < m).0 W Energy consumption typ. ( V). W Operating temperature 0 C C (-0) -0 C C (-0/00-000) Storage temperature -0 C C (-0) -0 C... + C (-0/00-000) Relative air humidity (no condensation) % Dimensions (mm) W x H x L 0 x x Height from upper-edge of DIN rail g Vibration resistance acc. to IEC 00-- Shock resistance acc. to IEC 00-- Degree of protection IP0 EMC -Immunity to interference acc. to EN 0-- (00) EMC -Emission of interference acc. to EN 0-- (00)

5 -0 -Port BASE- + -Slot BASE-FX Industrial Managed Switch RPS ALM POST OFF LINE -0 LASER ON Reset Primary Power LED Redundant Power LED Alarm LED POST LED LASER ON LED for fiber-optic modules Reset button -port Mbps LED -port LED RS- Console port (RJ-) 0 -ports 0/ Mbps () Base-FX LC Fiber slots (SFP-type) () Fiber port Offline LED () Fiber port LED () Fiber Mbps LED () 0/ 0 CONSOLE -port 0/+-port -FX Managed Switch (RS-) The -0 Industrial Switch is a -port 0/Base- with dual SFP Base-FX port (SFP modules are optional) configurable ETHERNET switch. The switch has a rugged housing, a redundant power supply and function monitoring with relay. These functions along with extensive ETHERNET switch options make it ideal for a wide range of applications. Web-based/SNMP management Redundant DC power supply Large supply voltage range: V... V /-Port BASE-/FX Industrial Managed Switch /-Port BASE-/FX Industrial Managed Switch T (Operating temperature -0 C C) Accessories SFP Module : 0nm, Base-FX Multi-mode LC, km SFP Module 0: 0nm, Base-FX Single-mode LC, 0 km SFP Module T: 0nm, Base-FX, Multi-mode, LC, km, (Operating temperature -0 C C) -0-0/ / / /00-00 Conformity marking r UL 0 to 0 C (-0/00-000) ( for product variations upon request) x 0/Base- (RJ-); x SFP Base-FX Fiber; x RS- (RJ-) DIP switch to enable alarm functions Full compliance with IEEE0., 0.u, 0.x,0.d, 0.q, 0.p standards Xpress Ring (redundant ring recovery < 0 ms) Non-blocking, store-and-forward switching Auto-negotiation on all 0/Base- ports Auto-MDI/MDIX (crossover) on all 0/Base- ports VLAN (0.q) VID IGMP Snooping for multicast filtering Port configuration, status, statistics Port Trunking SNMP v/v and RMON IEEE 0.u Base-/FX; IEEE 0.ad Port Trunking; IEEE 0. 0Base-T; IEEE 0.d Spanning Tree Protocol; IEEE 0.x Flow Control; IEEE 0.p Priority Queues; IEEE 0.q VLAN Tagging MAC table Up to K addresses VLANs Port-based and Tag-based (VIDs) Throughputs,0/,00 packets per second (pps) to 0/ Mbps ports Wavelength (optical fibers) depend on SFP module Maximum length 0/Base-: m; Fiber optic: up to 0 km; RS-: m Supply voltage V... V DC (line length < m) 0.0 W Energy consumption typ. ( V). W Operating temperature 0 C C (-0) -0 C C (-0/00-000) Storage temperature -0 C C (-0) -0 C... + C (-0/00-000) Relative air humidity (no condensation) % Dimensions (mm) W x H x L 0 x x Height from upper-edge of DIN rail g Vibration resistance acc. to IEC 00-- Shock resistance acc. to IEC 00-- Degree of protection IP0 EMC -Immunity to interference acc. to EN 0-- (00) EMC -Emission of interference acc. to EN 0-- (00)

6 - -Port BASE- Industrial Eco Switch +~0V DC + - The - has ports with each port featuring Auto-negotiation and auto MDI/MDI-X detection. Existing 0Mbps networks can now be upgraded effortlessly to higher speed Mbps Fast ETHERNET networks. The - -port density can be used to create multiple segments to alleviate client congestion and provide dedicated bandwidth to each user node. The - is a cost-effective solution to keep up with the constant demands for emerging IP-based industry communication needs. The switch can be easily configured and installed and is also ideally suited for small to medium-sized networks. -port 0/ Mbps Auto-negotiation ETHERNET ports Comprehensive front-panel diagnostic LEDs Supports Auto-MDI/MDI-X Full/half-duplex transfer modes for each port Wire speed reception and transmission Store-and-forward switching method Integrated address Look-Up Engine, supports K absolute MAC addresses Supports surge protection IEEE 0.x flow control for fullduplex Supports DIN rail -Port BASE- Industrial Eco Switch - Topology LED x 0/Base- (RJ-) IEEE 0. 0Base-T; IEEE 0.u Base-/FX; IEEE 0.x Flow Control Star each device: x Power (), green; each port: x Link/Activity (), green; x Speed ( Mbps), green V... 0 V DC W Supply voltage Operating temperature 0 C C Storage temperature -0 C C Relative air humidity (no condensation) % Dimensions (mm) W x H x L. x. x 0. Mounting Height from upper-edge of DIN rail DIN rail 0 g r UL 0

7 - -Port BASE- Industrial Eco Switch - has ports with each port featuring Auto-negotiation and Auto MDI/MDI-X detection. Existing 0Mbps networks can now be upgraded effortlessly to higher speed Mbps Fast ETHERNET networks. The - is a cost-effective solution to keep up with the constant demands for emerging IP-based industry communication needs. The switch can be easily configured and installed and is also ideally suited for small to medium-sized networks. -port 0/ Mbps Auto-negotiation ETHERNET ports Comprehensive front-panel diagnostic LEDs Supports Auto-MDI/MDI-X Full/half-duplex transfer modes for each port Wire speed reception and transmission Store-and-forward switching method Integrated address Look-Up Engine, supports K absolute MAC addresses Supports surge protection IEEE 0.x flow control for fullduplex Supports DIN rail -Port BASE- Industrial Eco Switch - Topology LED x 0/Base- (RJ-) IEEE 0. 0Base-T; IEEE 0.u Base-/FX; IEEE 0.x Flow Control Star each device: x Power (), green; each port: x Link/Activity (), green; x Speed ( Mbps), green V... 0 V DC W Supply voltage Operating temperature 0 C C Storage temperature -0 C C Relative air humidity (no condensation) % Dimensions (mm) W x H x L 0. x. x. Mounting Height from upper-edge of DIN rail DIN rail g r UL 0

0 SFP Modules Base-FX LC ELECTRICAL SUBASSEMBLY DATA DATA/ LASER _DISABLE <, mm > <, mm > _FAULT (0) () () MOD_DEF OPTICAL SUB- ASSEMBLIES < mm > <, > DATA DATA/ _LOS PRE- AMPLIFIER IC Diode ETHERNET

SFP Module : 0nm, Base-FX Multi-mode LC, km SFP Module 0: 0nm, Base-FX Single-mode LC, 0 km SFP Module T: 0nm, Base-FX, Multi-mode, LC, km, (Operating temperature -0 C.

8 0 SFP Modules Base-FX LC ELECTRICAL SUBASSEMBLY DATA DATA/ LASER _DISABLE <, mm > <, mm > _FAULT (0) () () MOD_DEF OPTICAL SUB- ASSEMBLIES < mm > <, > DATA DATA/ _LOS PRE- AMPLIFIER IC Diode ETHERNET via fiber optic cables offers a multitude of advantages for industrial applications. High immunity to interference, electrical isolation, and long ranges are important parameters here. SFP Module : 0nm, Base-FX Multi-mode LC, km SFP Module 0: 0nm, Base-FX Single-mode LC, 0 km SFP Module T: 0nm, Base-FX, Multi-mode, LC, km, (Operating temperature -0 C C) Characteristics: Duplex LC optical connector Industry standard small form pluggable (SFP) package Compliant with Fast ETHERNET standard; Differential LVPECL inputs and outputs; Single.V power supply; TTL signal detect indicator; Hot pluggable capability Connector Duplex LC, Wavelength 0 nm, Fiber type Multi-mode./ μm, 0/ μm, Maximum length 000 m, Operating temperature 0 C C, Storage temperature -0 C C, Dimensions (mm) W x H x D:. x. x.; Laser Class acc. to EN 0- Connector Duplex LC, Wavelength 0 nm, Fiber type Single-mode / μm, Maximum length 0000 m, Operating temperature 0 C C, Storage temperature -0 C C, Dimensions (mm) W x H x D:. x. x.; Laser Class acc. to EN 0- Connector Duplex LC, Wavelength 0 nm, Fiber type Multi-mode./ μm, 0/ μm, Maximum length 000 m, Operating temperature -0 C C, Storage temperature -0 C C, Dimensions (mm) W x H x D:. x. x.; Laser Class acc. to EN 0- -0/ / /00-00

Industrial Switches Industrial Switches

Industrial Switches Industrial Switches Copper cables Fiber optic cable Ring redundancy Industrial Switches Contents 23 General Product Information 2 Interfaces and Configurations 2 Application and Installation