Product catalogue. going for the highest level in sustainability! -Syncro+ -Office Protection Station

Transcription

1 Product catalogue Syncro+ -Office Protection Station -Mint -Mantis II Tower -Mantis RT -Mantis II RT NP -Logix II Tower NP -Logix RT -Logix II RT NP -Lynx -Lynx II Modular going for the highest level in sustainability!

2 NEXT UPS Systems Overview NEXT UPS Systems is a European based company with over 15 of experience in UPS power products. NEXT UPS Systems is committed to providing high quality products and services to meet diverse customer requirements. In cooperation with some of the best OEM UPS manufacturing plants, NEXT UPS Systems is dedicated to continuously design, manufacture, and introduce a complete line of UPSs and power products to the demanding power market. NEXT UPS Systems guarantees reliable product development and consistent manufacturing quality, from raw materials to finished products. NEXT UPS Systems s team is ready to start a new chapter in the global power market. At NEXT UPS Systems we re committed in providing solutions & services to our customers. It s all about the right solution, at the right place, with the right NEXT product. We believe people make the difference between a good and a great company. Welcome to NEXT, a great company Mission and Vision NEXT UPS Systems s identity is its commitment to customers, partners, distributors, employees, and the earth. We strongly believe that each customer will be the key growth engine for NEXT UPS Systems. All NEXT UPS Systems single-phase products come with a 3-year onsite warranty YEAR O N - S I T E NEXT UPS products - standard 3-year on-site warranty OPTIONAL YEAR ON-SITE NEXT UPS products - optional 5-year on-site warranty NEXT UPS Systems come with a 3 year onsite warranty on single-phase products, electronics & batteries included. As distributed product, we offer a warranty extension to 5 YEAR. 2

3 Index Eurobat partnership in sustainability NEXT UPS SYSTEMS uses Eurobat 6-9 batteries for higher sustainability and less energy/ecological footprint. UPS Technology Off-line, Line-interactie and On-line topology explained. 4 6 Off-line UPS The SYNCRO+/Office Protection Station family offers guaranteed power protection for wireless networks, computers, gaming consoles and other electronics in your home or business. Models supply battery backup during outages and unsafe voltage fluctuations, as well as provide protection from damaging surges and spikes. Line Interactive UPS The MINT/MANTIS II/MANTIS RT/MANTIS II RT family offers guaranteed power protection for medium and high load levels making them ideal for today s multi-core or virtualized servers that have varying load consumption. Available in a variety of form factors (tower, rack mount, rack/tower convertible) there is a model for every application and budget. MINT/MANTIS II/MANTIS RT/ MANTIS II RT feature a display, extended range automatic voltage regulation (AVR), and pure sine wave output on battery. Online UPS LOGIX II/LOGIX RT/LOGIX II RT/LYNX/LYNX II MODULAR family provides high density, true double-conversion on-line power protection for ser-vers, voice / data networks, medical labs, and light industrial applications. Capable of supporting loads from 1 to 10kVA in a rack/tower convertible form, the LOGIX RT is available from 2U to 6U. LOGIX/LYNX Tower family extensions at 10 and 200kVA enable support of blade servers or heavily loaded equipment racks. Accessories NEXT UPS Systems offers a wide range of accessories like : communication cards (SNMP/SNMP WEB/AS400/ModBus), PDU s, apdu s, ipdu s, Maintenance bypass Switch, ATS 16(Automatic Transfer Switch), Rackmount slider etc Software NEXTVision is an advanced UPS management software. It allows remote monitoring and management from one to multiple UPSs in a networked environment, either LAN or INTERNET. It can not only prevent data loss from power outage and safely shutdown systems, but also store programming data and scheduled shutdown UPSs. NEXT Warranty NEXT UPS Systems single phase products come with a standard 3 year onsite warranty. Optional Warranty extensions 5 are available for every model. NEXT Battery Replacement NEXT UPS Systems offers replacement batteries for all uninterruptible power supplies as well as battery replacement services

4 Eurobat EUROBAT EUROBAT Sustainability Perspectives The European Battery industry represented in EUROBAT is continuously developing new ways to ensure that batteries remain a sustainable resource for the economy and the environment. Batteries will continue to contribute to sustainability through the development of new applications for electric vehicles and renewable energy storage. In addition, battery manufacturers continue to ensure that proper developments are undertaken to ensure that battery production remains sustainable and has a minimal impact on the environment and the health of humans. Innovations in carbon capture are also being made to ensure reduced carbon emissions from factories and these will see continuous improvements in the future. Water treatment technologies are also being developed and both these advancements will contribute significantly to continuously cleaner emissions from the production of batteries. Improved recycling methods are also being introduced, resulting in a greater amount of materials being recovered from end-of-life batteries ensuring a further decrease on the demand for untapped resources which will ensure their continued availability in the future. EUROBAT and its members will continue to directly contribute to the sustainability of batteries through the continued implementation of EUROBAT guidelines, monitoring of blood-lead levels in Europe and the formulation of further guidelines for the battery industry in areas such as respect of workers health and safety and the safe transport of batteries. source : Sustainability Report - By: EUROBAT Committee for Environmental Matters (CEM) NEXT UPS SYSTEMS USES EUROBAT 6-9 BATTERIES FOR HIGHER SUSTAINABILITY AND LESS ENERGY/ECOLOGICAL FOOTPRINT. EUROBAT Batteries used in standard UPS <= 10kVA UPS BRAND NEXT UPS Systems OTHER UPS Brands EUROBAT 6-9 Batteries EUROBAT 3-5 Batteries 4

5 Eurobat THE EUROBAT guide for the specification of valve regulated LEAD-ACID stationary celles & batteries Eurobat QUALIFICATIONS - In absence of any other other agreement between the manufacturer and the "User", the following characteristics may be qualified by test methods in the International Specification, IEC EUROBAT 3-5 YEARS STANDARD COMMERCIAL This group of batteries is at the consumer end of standby applications and are popular in small emergency equipment. EUROBAT 6-9 YEARS GENERAL PURPOSE This group of batteries is usually used when an improved life is required in comparison to the Standard Commercial product, and also in cases where operational conditions are more severe. EUROBAT 10/12 YEARS LONG LIFE This group of batteries is used where high power, long life and high reliability are required. EUROBAT > 12 YEARS VERY LONG LIFE This group of batteries is used in applications where longest life and highest reliability are required. MAIN FACTOR AFFECTING SERVICE LIFE : Service life is strongly related to the working conditions of the battery. AMBIENT TEMPERATURE Operation of valve regulated lead acid batteries on float at temperatures higher than 20 C reduces the battery life expectancy, with 50 life reduction per 10 C constant increase of the temperature. However adjustment of the float voltage according to the ambient temperature might reduce this effect. More information should be available in the manufacturers specification or operating guide. 5

6 UPS Technology UPS Technology OFF-LINE TECHNOLOGY 230V VOLTAGE Battery mode +/- 180V Outage = 4-6 m/s 0V Mains input UPS output Passive standby topology (off-line) is the most frequently used UPS topology for protecting PCs against power failure, power sag and power surge. In normal mode, the UPS supplies power to the application directly from the mains, filtered but without active conversion. The battery is charged from the mains. In the event of a power cut or fluctuation, the UPS delivers stable power from the battery. The advantages of this topology are low cost and adequacy for office environments. Passive standby topology is not suitable if the power supply is of low quality (industrial sites) or subject to frequent disruptions. LINE INTERACTIVE TECHNOLOGY VOLTAGE AVR Boost function 230V +/- 210V Battery mode +/- 180V Outage = 4-6 m/s 0V Mains input UPS output Line interactive topology is used for protecting enterprise networks and IT applications against power failure, power sag, power surge, undervoltage and overvoltage. In normal mode, the device is controlled by a microprocessor that monitors the quality of the supply and reacts to fluctuations. A voltage compensation circuit is enabled to boost (Boost) or reduce (Buck) (Automatic Voltage Regulation) the supply voltage to compensate for the fluctuations. The main advantage of this topology is that it enables compensation of under and overvoltage without using the batteries. ON-LINE TECHNOLOGY VOLTAGE 230V Battery mode 0V Mains input UPS output Double conversion topology (on-line) is a basis for UPSs designed for continuous power protection of critical equipment against all nine power problems: power failure, power sag, power surge, undervoltage, overvoltage, switching transient, line noise, frequency variation and harmonic distortion. It ensures a consistent quality of power supply regardless of disturbances in the incoming mains. The output voltage is entirely regenerated by a sequence of AC to DC conversion followed by DC to AC conversion in order to create power supply without any electrical interference. Double conversion UPSs can be used with any type of equipment as there are no transients when changing over to battery power. 6

7 Off-Line UPS Syncro+ built-in batteries 5min MODIFIED SINEWAVE 600VA/800VA standby UPS High frequency design Compact size with stand and mounting flexibility Suitable for active PFC equipped personal computers Auto restart while AC is recovering Simulated sine wave output Cold start function USB communication port NEXTVision shutdown software suite 3 NEXT Onsite warranty Off-Line SYNCRO+ Off-Line UPS Selection Guide MODEL SYNCRO+ 600 SYNCRO+ 800 CAPACITY 600 VA / 360 W 800 VA / 480 W INPUT Voltage 220/230/240 VAC Acceptable Voltage Range VAC Frequency 50Hz (Auto sensing) OUTPUT Output Voltage 220/230/240 VAC Voltage Regulation (Batt. Mode) ± 10 Frequency Range (Batt. Mode) 50Hz ± 1 Hz Transfer Time (Typical) 2-6 ms Waveform (Batt. Mode) Simulated Sinewave BATTERY Battery Type & Number 12 V / 7 Ah x 1 12 V / 9 Ah x 1 Typical Recharge Time 8 hours recover to 90 capacity INDICATORS AC Mode Green lighting Battery Mode Green flashing every 10 seconds Low Battery (Batt. Mode) Green flashing every second and red lighting Fault Red lighting ALARM Battery Mode Sounding every 10 seconds Low Battery (Batt. Mode) Sounding every second Fault Continuously sounding PHYSICAL Dimension, D x W x H (mm) 228 x 82.5 x 207 (vertically stand) Net Weight (kgs) ENVIRONMENT Humidity 0-90 Operating Temperature 0-40 C (non-condensing) MANAGEMENT USB Port Supports Windows, Linux, Unix, and MAC NEXT PARTNUMBERS SYNCRO+ IEC SYNCRO+ BE/FR SYNCRO+ NL/LU NEXT 5+ warranty extension Product specifications are subject to change without further notice 7

8 Off-Line UPS Office Protection Station PURE SINEWAVE RACK&TOWER VERSATILE (HE Mode) 93 MODIFIED SINEWAVE 97 PURE SINEWAVE 600VA/800VA standby UPS High frequency design Compact size with stand and mounting flexibility Suitable for active PFC equipped personal computers Auto restart while AC is recovering Simulated sine wave output Cold start function 3 NEXT Onsite warranty RACK&TOWER VERSATILE (HE Mode) TOUCH PANEL built-in MODIFIED batteries DISPLAYSINEWAVE Office Protection Station Off-Line UPS Selection Guide rack kit rack kit MODEL Office Protection Station 600 Office up Protection to Station 800 5min 50min 5min CAPACITY 600 VA / 300 W 800 VA / 420 W Frequency N+X 95 REDUNDANT USB HID INPUT OPTIONAL 13 Voltage Acceptable 9 Voltage Range10 APFC LOAD SUPPORT min TOUCH PANEL (Line Mode) DISPLAY /230/ VAC VAC 55Hz (Auto sensing) OUTPUT rack kit Output Power Factor 0,5 0,525 5min 92 USB built-in HID batteries OPTIONAL N+X REDUNDANT 16 APFC LOAD SUPPORT built-in batteries Nominal Output Voltage built-in 230V AC OPTIONAL 13 Voltyage Regulation (Battery Mode) ±10 Frequency Range (Battery Mode) 50Hz ±1Hz Waveform (Batt. Mode) Modified Sinewave Line Mode >95 Bettery Mode >70 BATTERY Battery Type & Number 12 V / 5 Ah x 1 12 V / 9 Ah x 1 Typical Recharge Time 8 hours recover to 90 capacity INDICATORS AC Mode Green lighting Battery Mode Green flashing every 10 seconds Low Battery (Batt. Mode) Green flashing every second and red lighting Fault Red lighting ALARM Battery Mode Sounding every 10 seconds Low Battery (Batt. Mode) Sounding every second Fault Continuously sounding PHYSICAL Dimension, W x H x D (mm) 320 x 125 x x 170 x 92,5 Net Weight (kgs) 3,7 5 ENVIRONMENT Humidity 0-90 Operating Temperature 0-40 C (non-condensing) NEXT PARTNUMBERS Office Protection Station BE/FR Office Protection Station NL/LU NEXT 5+ warranty extension Product specifications are subject to change without further notice batteries 8

9 Line Interactive UPS Mint built-in batteries DISPLAY MODIFIED SINEWAVE 850VA/1500VA/3000VA line interactive UPS Built-in super smart charger, shorten 50 of charging time Excellent microprocessor control guarantees high reliability Boost and buck AVR for voltage stabilization Auto restart while AC is recovering Simulated sine wave output Off-mode charging Cold start function USB communication port and RJ-11/ protection panels for selections NEXTVision shutdown software suite 3 NEXT Onsite warranty 9 1 Mint Line Interactive UPS Selection Guide MODEL Mint 850 Mint 1500 Mint 3000 CAPACITY 850 VA / 480 W 1500 VA / 900 W 3000 VA / 1800 W INPUT Voltage 220/230/240 VAC Voltage Range VAC Frequency Range 50 Hz (auto sensing) OUTPUT Output Voltage 220/230/240 VAC AC Voltage Regulation (Batt. Mode) ±10 Frequency Range (Batt. Mode) 50 Hz ±1 Hz Transfer Time Typical 2-6 ms, 10ms max. Waveform (Batt. Mode) Simulated Sinewave BATTERY Battery Type & Number 12 V / 9 Ah x 1 12 V / 9 Ah x 2 12 V / 9 Ah x 4 Typical Recharge Time 4-6 hours recover to 90 capacity PROTECTION Full Protection Overload, discharge, and overcharge protection INDICATORS Display AC Mode, Battery Mode, Load Level, Battery Level, Input Voltage, Output Voltage, Overload, Fault, and Low Battery ALARM Battery Mode Sounding every 10 seconds Low Battery Sounding every second Overload Sounding every 0.5 second Battery Replacement Alarm Sounding every 2 seconds Fault Continuously sounding PHYSICAL Dimension, D x W x H (mm) 287 x 100 x x 146 x x 150 x 250 Net Weight (kgs) ENVIRONMENT Humidity C (non-condensing) Noise Level Less than 40dB MANAGEMENT USB Port Supports Windows, Linux, Unix, and MAC NEXT PARTNUMBERS MINT IEC MINT BE/FR MINT NL/LU NEXT 5+ warranty extension Line Interactive Product specifications are subject to change without further notice 9

10 Line Interactive UPS Mantis II Tower Display Panel built-in batteries PURE SINEWAVE 13 USB HID DISPLAY 9 5 Ideal for network equipment,nas,atm and Kiosks Line-interactive UPS with sine wave output Cost-efficient solution without compromising the performance High conversion efficiency (>95) results in energy saving Automatic boost and buck voltage regulation graphic display gives comprehensive information at a glance HID-compatible USB port Easy battery replacement 97 Compact design and easy to install CE and UL applicable 6 USB HID Getting tired of installing monitoring software for UPS? With our UPS featured USB port which supports HID (Human Interface Device) Power Device Class, no more software installation is needed Hot-swappable battery design 94 This design ensures clean and uninterruptible power to protected equipment during battery replacement. 92 Computer s Operating systems such as Windows/Linux/ MAC OS comes with an embedded power management and monitoring function. When such computer connects 12 to a UPS with 13this feature, the 14 UPS will be automatically 15 recognized by the OS as a HID UPS Battery. UPSs with this feature is also ideal as a back-up power for NAS (Network Attached Storage). 16 5min 17 rack kit built-in batteries HID UPS Battery supported USB Port User Replaecable Batteries Hot Swappable function User-friendly display Mantis II 500/750 Tower 10

11 Line Interactive UPS Mantis II Tower Line Interactive UPS Selection Guide MODEL MANTIS II 500 Tower MANTIS II 750 Tower MANTIS II 1000 Tower MANTIS II 1500 Tower CAPACITY 500 VA / 350 W 750 VA / 450 W 1000 VA / 700 W 1500 VA / 900 W INPUT Voltage 220/230/240 VAC Acceptable Voltage Range VAC Frequency 55Hz OUTPUT Output Power Factor 0,7 0,6 0,7 0,6 Nominal Output Voltage 220/230/240V AC Voltyage Regulation -10 to +6 Voltyage Regulation (Battery Mode) -10 to +6 Frequency Range (Battery Mode) 50Hz ± 0,1Hz Waveform (Batt. Mode) Pure sine wave Line Mode >94 AVR Mode >90 Bettery Mode >70 BATTERY Battery Type & Number 12 V / 9 Ah x 1 12 V / 9 Ah x 2 Backup Time (@ Typical PC load) 20 min 40 min Typical Recharge Time (to 90) 3 hours TRANSFER Battery mode <-> Line mode <10ms Display AUDIABLE ALARM PHYSICAL Dimension, W x H x D (mm) 150x209x240mm 150x209x340mm Net Weight (kgs) 6,8kg 11,5kg ENVIRONMENT Noise level 1 meter 1 meter Operating Temperature 0-40 C (non-condensing) NEXT PARTNUMBERS MANTIS II Tower NEXT 5+ warranty extension Line Interactive Product specifications are subject to change without further notice 11

12 Line Interactive UPS Mantis RT Display Panel Rack 10 display Tower display 92 PURE MODIFIED MODIFIED built-in RACK&TOWER PURE PURE SINEWAVE SINEWAVE SINEWAVE batteries VERSATILE SINEWAVE SINEWAVE Microprocessor-based line interactive design Mantis RT UPS is designed with microprocessor controller for fast response to power disturbances. 20min 20min Pure sine TOUCH wave TOUCH output REDUNDANT TOUCH PANEL DISPLAY PANEL PANEL RACK&TOWER DISPLAY OPTIONAL (Line VERSATILE Mode) VERSATILE (HE Mode) (Line Mode) (HE Mode) (HE Mode) (Line Mode) DISPLAY DISPLAY With pure sine wave output, Mantis RT series guarantees compatibility for all kinds of loads. It's perfect power protection for versatile applications such as networking, telecom and other mission-critical applications. 50min 50min User-friendly USB OPTIONAL USB HID HID and OPTIONAL easy-shift OPTIONAL display The front 13 panel 13 digital display can be 16easily shifted 17through setting to suit the installation format, vertically stand or flat wall mount. Rack/Tower design Mantis RT series is designed in true 2U universal-mount case. It can be easily installed as floor-standing tower or in 19-inch rackmount bracket. 9 N+X N+X US HID N+X APFC 19" rack-mounting rack kit (Line Mode) APFC APFC LOAD REDUNDANT LOAD LOAD SUPPORT SUPPORT SUPPORT (Line Mode) 5min 6 94 rack kit 5min 5min min 16 rack kit Programmable power management outlets With programmable power management outlets, users can easily and independently control load segments. During power failure, this 94 feature 92 enables 92 users to extend battery time to missioncritical devices by shutting down the non-critical devices. rack rack kit kit built-in batteries (Line Mode) Mantis RT2U 1100/1500/2000 built-in built-in batteries batteries Programmable Outlets (P1) - connect to non-critical devices 17 ECO operation for energy saving (Efficiency Corrective Optimizer) The ECO function allows cost-effective operation of UPS Systems as high as 98. In this operation mode, load is supplied by the mains. In the event of a mains failure, the inverter takes over the load and provides supply continuity to the connected systems. Emergency Power Off Function (EPO) This feature can secure the personnel and equipment in case of fires or other emergencies. EXB Battery extensions available To provide longer backup time, we also offer EXB Battery extensions for Mantis RT series. 17 built-in batteries Floor-standing Tower Built-in boost and buck AVR With built-in voltage regulator, the UPS will maintain regulated nominal output without using battery power during brownouts and overvoltages. Output power factor 0.9 Mantis RT is a high-density UPS with output power factor 0.9 to provide higher performance and efficiency to critical applications. Hot-swappable battery design This design ensures clean and uninterruptible power to protected equipment during battery replacement. Mantis RT2U 1100/1500/2000 Multiple communication available - USB port - RS-232 port - SNMP slot We also offer free monitoring software, NEXTVision, downloaded from the internet. This advanced and networking software supports various operating systems and multiple languages. 12

13 Line Interactive UPS Mantis RT Line Interactive UPS Selection Guide MODEL Mantis 1100 RT2U Mantis 1500 RT2U Mantis 2000 RT2U Mantis 2500 RT2U Mantis 3000 RT2U CAPACITY 1100 VA / 990 W 1500 VA / 1350 W 2000 VA / 1800 W 2500 VA / 2250 W 3000 VA / 2700 W INPUT Voltage 208/220/230/240 VAC Acceptable Voltage Range VAC Frequency Range 50 Hz (auto sensing) OUTPUT Output Voltage 208/220/230/240 VAC Voltage Regulation (Batt. Mode) ± 3 (before battery alarm) Frequency Range (Batt. Mode) 50 Hz ± 1 Hz Current Crest Ratio 3:1 Harmonic Distortion linear load, non-linear load (before alarm) Transfer Time Typical 2-6 ms, 10ms max. Waveform (Batt. Mode) Pure Sinewave AC Mode Buck & Boost Mode Battery Mode BATTERY Type & Number 12 V/9 Ah x 2 12 V/9 Ah x 4 12 V/9 Ah x 4 12 V/9 Ah x 6 12 V/9 Ah x 6 Standard Model Charging Voltage 27.4 VDC ± VDC ± VDC ± 1 Typical Recharge Time 4 hours recover to 90 capacity PROTECTION Full Protection Overload, discharge, and overcharge protection INDICATORS Display AC Mode, Battery Mode, Load Level, Battery Level, Input Voltage, Output Voltage, Overload, Fault, and Low Battery ALARM Battery Mode Sounding every 10 seconds Low Battery Sounding every second Overload Sounding every 0.5 second Fault Continuously sounding PHYSICAL Standard Model Dimension, DxWxH (mm) 380 x 438 x x 438 x x 438 x 88 Net Weight (kgs) ENVIRONMENT Humidity C (non-condensing) Noise Level Less than 45dB MANAGEMENT Smart RS-232/USB Supports Windows, Linux, Unix, and MAC Optional SNMP/Web Interface Power management from SNMP manager and web browser NEXT PARTNUMBERS MANTIS RT MANTIS EXB RT (Battery extension) NEXT 5+ Warranty Extension (UPS) NEXT 5+ Warranty Extension (EXB) SNMP/Web Interface Line Interactive Product specifications are subject to change without further notice 13

14 Line Interactive UPS Mantis II RT NETPACK MODIFIED SINEWAVE PURE SINEWAVE RACK&TOWER VERSATILE (HE Mode) min TOUCH PANEL 20min TOUCH PANEL DISPLAY N+X94 REDUNDANT APFC 92 SNMP WEB Interface II LOAD included SUPPORT min MODIFIED MODIFIED built-in SINEWAVE SINEWAVE batteries PURE USB PURE SINEWAVE SINEWAVE HID RACK&TOWER OPTIONAL VERSATILE VERSATILE Microprocessor-based line interactive design Mantis RT UPS is designed with microprocessor controller for fast response to power disturbances. TOUCH TOUCH Pure sine wave output PANEL PANEL DISPLAY DISPLAY USB HID DISPLAY OPTIONAL (HE Mode) (HE Mode) min 20min 50min 50min N+X N+X REDUNDANT 98 up 98 to 5min With pure sine wave output, Mantis RT series guarantees compatibility for all kinds of loads. It's perfect power protection for versatile applications such as networking, telecom and other mission-critical applications USB USB HID User-friendly HID OPTIONAL OPTIONAL and easy-shift display min The front panel digital display can be easily shifted to suit the installation format, vertically stand or flat wall mount. Rack/Tower design Mantis RT series is designed in true 2U universal-mount case. It can be easily installed as floor-standing tower or in 19-inch rackmount bracket. APFC APFC LOAD LOAD SUPPORT SUPPORT 5min 5min rack kit built-in (Line batteries Mode) Display Panel Programmable power management outlets With programmable power management outlets, users can easily (Line Mode) rack rack kit kit and independently control load segments. During power failure, this feature enables users to extend battery time to missioncritical devices by shutting down the non-critical devices. batteries built-in built-in Mantis II RT2U batteries 3000 NP min (Line Mode) 17 rack kit built-in batteries Programmable Outlets (P1) - connect to non-critical devices ECO operation for energy saving (Efficiency Corrective Optimizer) The ECO function allows cost-effective operation of UPS Systems as high as 98. In this operation mode, load is supplied by the mains. In the event of a mains failure, the inverter takes over the load and provides supply continuity to the connected systems. Emergency Power Off Function (EPO) This feature can secure the personnel and equipment in case of fires or other emergencies. Floor-standing Tower 19" rack-mounting EXB Battery extensions available To provide longer backup time, we also offer EXB Battery extensions for Mantis II RT series. All connections are accessible from the front of the Unit. Built-in boost and buck AVR With built-in voltage regulator, the UPS will maintain regulated nominal output without using battery power during brownouts and overvoltages. Output power factor 0.9 Mantis II RT is a high-density UPS with output power factor 0.9 to provide higher performance and efficiency to critical applications. Hot-swappable battery design This design ensures clean and uninterruptible power to protected equipment during battery replacement. Multiple communication available - USB/HID port - RS-232 port - SNMP/WEB Interface included We also offer free monitoring software, NEXTVision, downloaded from the internet. This advanced and networking software supports various operating systems and multiple languages. 14

15 Line Interactive UPS Mantis II RT NETPACK Line Interactive UPS Selection Guide MODEL Mantis II 1000 RT2U NP Mantis II 1500 RT2U NP Mantis II 2000 RT2U NP Mantis II 3000 RT2U NP CAPACITY 1000 VA / 900 W 1500 VA / 1350 W 2000 VA / 1800 W 3000 VA / 2700 W INPUT Input Voltage Range VAC Frequency Range Hz Input Wiring Single phase with ground Current Distortion (THDi) 10 OUTPUT Output Power Factor 0.9 Nominal Output Voltage 220/230/240 VAC Voltage Regulation Voltage Regulation (Batt. Mode) ± 5 Frequency Range (Batt. Mode) 50 ± 0.1 Hz Voltage Distortion (THDv) < linear load, < non-linear load Output Waveform (Batt. Mode) Pure Sinewave Line Mode 97 AVR Mode Boost mode : 92, Buck mode : 95 Battery Mode > 80 > BATTERY Type & Number 12 V / 9 Ah x 3 12 V / 9 Ah x 4 12 V / 9 Ah x 6 Standard Model Charging Current 1,5 A Typical Recharge Time 4 hours recover to 90 capacity PROTECTION Full Protection Overload, discharge, and overcharge protection INDICATORS Display AC Mode, Battery Mode, Load Level, Battery Level, Input Voltage, Output Voltage, Overload, Fault, and Low Battery ALARM Battery Mode Sounding every 10 seconds Low Battery Sounding every second Overload Sounding every 0.5 second Fault Continuously sounding PHYSICAL Line Interactive Standard Model Dimension, WxHxD (mm) 438 x 86,5 x x 86,5 x x 86,5 x 604 Net Weight (kgs) 16 17, ENVIRONMENT Operating temperature 0-40 C Noise Level < 45dB MANAGEMENT Smart RS-232/USB Supports Windows, Linux, Unix, and MAC SNMP/Web Interface Power management from SNMP manager and web browser NEXT PARTNUMBERS MANTIS II RT NETPACK EXB II RT (Battery extension) NEXT 5+ Warranty Extension (UPS) NEXT 5+ Warranty Extension (EXB) Product specifications are subject to change without further notice 15

16 Online UPS Logix II tower Netpack MODIFIED SINEWAVE PURE SINEWAVE RACK&TOWER VERSATILE (HE Mode) min TOUCH PANEL DISPLAY N+X REDUNDANT APFC LOAD SUPPORT SNMP WEB Interface II included min built-in batteries PURE USB SINEWAVEHID 93 OPTIONAL DISPLAY 97 5min rack kit built-in batteries True double-conversion online UPS 94 A true double conversion UPS will provide clean, high level quality power to fully protect mission-critical devices such as sensitive networks, small computer centers, servers, telecom applications, as well as for industrial applications. 11 Output power factor 0.9 rack Compared to the online UPSs kit in the current market, Logix series provides better 5min output power factor 0.9. It offers higher performance and efficiency for critical applications. built-in batteries USB HID Getting tired of installing monitoring software for UPS? With our UPS featured USB port which supports HID (Human Interface Device) Power Device Class, no more software installation is needed. 50/60 Hz Frequency Converter Mode Lock output frequency at 50Hz or 60Hz to suit power sensitive equipments. ECO mode operation for energy saving Offers efficiency as high as 97 to cut energy usage & cost. UPS power application via static bypass, timely returning to online double conversion when the need arises. Emergency Power Off (EPO) Function This feature can secure the personnel and equipment in case of fires or other emergencies. Wide input voltage range (110 V -300 V) Logix can still provide stable power to connected devices under unstable power environments. Computer s Operating systems such as Windows/Linux/MAC OS comes with an embedded power management and monitoring function. When such computer connects to a UPS with this feature, the UPS will be automatically recognized by the OS as a HID UPS Battery. UPSs with this feature is also ideal as a back-up power for NAS (Network Attached Storage). Display Panel HID UPS Battery supported USB Port Logix II Tower 1000 NP 16

17 Online UPS Logix II Tower Netpack Online UPS Selection Guide MODEL LOGIX II 1000 TOWER NETPACK LOGIX II 2000 TOWER NETPACK LOGIX II 3000 TOWER NETPACK TYPE Online UPS CAPACITY 1000 VA/900 W 2000 VA/1800 W 3000 VA/2700 W OUTPUT POWER FACTOR 0.90 INPUT Input Voltage Range VAC or 80x285 VAC in bypass mode Max THDi <5 Input PF 0.99 at full load Frequency Range 40 Hz ~ 70 Hz Frequency (Synchronized Range) 45Hz - 55Hz or 54Hz - 66Hz OUTPUT Nominal Output Voltage 220/230/240 VAC Pure Sine Wave THDv 2 Full Linear Load; 5 Non-Linear Load Voltage Regulation (Bat. Mod.) ±2 Frequency Reg. (Battery Mode) ±0,05Hz TECHNICAL DETAILS Load Crest Ratio 03:01 Transfer Time [AC to Battery] 0 ms Transfer Time [Inverter to Bypass] 4 ms Generator support Overload Capacity Line: bypass at higher; BAT: cut-off at higher External Battery Connection Charger 1.5A Fan Logic Always ON : Low speed: bypass/eco or line mode with load below 70 High speed: Battery mode or line mode with load above 70 LINE mode full Load BATTERIES & AUTONOMY Battery Type 2x 12V/9Ah 4x 12V/9Ah 6x 12V/9Ah Numbers Standard DC Voltage 2 x 12V 4 x 12V 6 x 12V Model Recharge Time 4h to 90 4h to 90 4h to 90 Full Load Backup Time 3.7 min 3.8 min 3.9 min Half Load Backup Time 10.5 min 11.0 min 11.7 min CONNECTIONS & COMMUNICATION IEC C13 Outlet 4 IEC C19 Outlet Input Software USB port HID Support Winpower RS-232 Port Yes, 1 Extension Slot EPO Port Yes PHYSICAL - LOGISTICS Package Content UPS, Manual, USB Cable, Input Power Cable, 2x IEC Cable, SNMP/WEB Interface Manual Languages EN EAN Width 144 mm 190 mm Height 229 mm 328 mm Depth 356 mm 399 mm Weight 9.3 kg 17.2 kg 22.2 kg BOX - Width 240 mm 324 mm BOX - Height 330 mm 464 mm BOX - Depth 436 mm 500 mm BOX - Weight 11 kg 20 kg 26 kg Pcs. per box 1 Pcs. per pallet NEXT PART NUMBERS LOGIX II Tower NETPACK LOGIX II Tower EXB NEXT 5+ Warranty Extension (UPS) NEXT 5+ Warranty Extension (EXB) Yes Yes Yes Yes Online Product specifications are subject to change without further notice Logix II Tower Netpack Battery Pack Capacity (VA) 1000VA 2000VA 3000VA Battery Type 12 V 9 Ah 12 V 9 Ah 12 V 9 Ah # Batteries 4 pcs 8 pcs 12 pcs Dimension (DxWxH) mm 345 X 144 X X 190 X 330 Net Weight (kgs) Product specifications are subject to change without further notice 17

18 Online UPS Logix RT Logix RT 1000/1500/2000/ VA Logix RT 6000/10000 VA 92 MODIFIED MODIFIED built-in SINEWAVE SINEWAVE batteries PURE PURE SINEWAVE SINEWAVE RACK&TOWER VERSATILE VERSATILE True double-conversion online UPS A true double conversion UPS will provide clean, high level quality power to fully protect mission-critical devices such as sensitive networks, small computer centers servers, telecom applications, APFC APFC 20min as well as for industrial applications. Output power factor DISPLAY OPTIONAL (Line Mode) (HE Mode) (HE Mode) min TOUCH TOUCH PANEL PANEL DISPLAY DISPLAY N+X N+X REDUNDANT Logix RT is a high-density UPS with output power factor 0.9 to provide higher performance and efficiency to critical applications. 50min 50min USB User-friendly HID and easy-shift display USB HID OPTIONAL OPTIONAL The front 13 panel 13 digital display can be easily 15 15shifted through setting to suit the installation format, vertically stand or flat wall mount. rack kit Rack/Tower design Logix RT series is designed in true universal-mount case. It can be easily installed as floor-standing tower or in 19-inch rackmount bracket. LOAD LOAD SUPPORT SUPPORT 5min 5min min (Line Mode) 16 built-in batteries Programmable power management outlets With programmable power management outlets, users can easily and independently control load segments. During power failure, this feature enables users to extend battery time to missioncritical devices by shutting down the non-critical devices. (Line Mode) rack rack kit kit Programmable Outlets (P1) - connect to non-critical devices 50/60 Hz frequency converter mode (Line Mode) built-in built-in batteries batteries Lock output frequency at 50Hz or 60Hz to suit power sensitive equipments. rack kit ECO and advanced ECO mode for energy saving It allows UPS to operate in high efficiency 97 in energysaving ECO mode. In this operation mode, load is supplied by the mains. In the event of a mains failure, the inverter takes over the load and provides supply continuity to the connected systems. Logix RT 1-3kVA even offers advanced ECO mode to allow UPS to operate at higher efficiency 98. Emergency Power Off Function (EPO) This feature can secure the personnel and equipment in case of fires or other emergencies. Hot-swappable battery design for 1-3kVA models only This design ensures clean and uninterruptible power to protected equipment during battery replacement. DSP technology applied for 6kVA and up models A DSP controller provides an improved and cost-effective solution with high performance " rack-mounting Floor-standing Tower 18 Active input power factor correction 0.99 for 6kVA and up models This feature will save more energy and its power factor performance is more stable to meet higher environment standards.

19 Online UPS Logix RT EXB Battery Pack Capacity 1kVA 1.5kVA 2kVA 3kVA 6kVA 10kVA Battery Type 12 V / 9 Ah 12 V / 9 Ah 12 V / 9 Ah 12 V / 9 Ah 12 V / 9 Ah 12 V / 9 Ah # Batteries 4 pcs 6 pcs 8 pcs 12 pcs 20 pcs 20 pcs 1kVA/1.5kVA/2kVA/3kVA Battery Pack Dimension (DxWxH) 480 x 438 x x 438 x x 438 x x 438 x x 438 x x 438 x 133 Net Weight (kgs) Logix RT Online UPS Selection Guide 6kVA/10kVA Battery Pack MODEL LOGIX RT 1000 LOGIX RT 1500 LOGIX RT 2000 LOGIX RT 3000 PHASE CAPACITY INPUT Voltage Range Single phase with ground VA 1000 VA 1500 VA 2000 VA 3000 VA W 900 W 1350 W 1800 W 2700 W Low Line Transfer Low Line Comeback 160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5 (based on load percentage / / / 60-0) 170 VAC / 150 VAC / 130 VAC / 120 VAC ± 5 (based on load percentage / / / 60-0) High Line Transfer 150 VAC ± 5 or 300 VAC ± 5 High Line Comeback 140 VAC ± 5 or 290 VAC ± 5 Frequency Range Power Factor 40Hz ~ 70Hz Nominal Voltage (100 load) OUTPUT Output Voltage 208/220/230/240 VAC AC Voltage Regulation (Batt. Mode) ± 1 Frequency Range (Synchronized Range) Frequency Range (Batt. Mode) Current Crest Ratio Harmonic Distortion Line mode to Battery mode Transfer Time Inverter to Bypass Waveform (Batt. Mode) 47 ~ 53 Hz 50 Hz ± 0.2 Hz 5:1 (max.) 2 THD (Linear Load) ; 8 THD (Non-linear Load) Zero 4 ms (Typical) Pure Sinewave Online AC Mode Battery Mode BATTERY Battery Type 12 V / 9 AH 12 V / 9 AH 12 V / 9 AH 12 V / 9 AH Numbers Typical Recharge Time 4 hours recover to 90 capacity 4 hours recover to 90 capacity 4 hours recover to 90 capacity 4 hours recover to 90 capacity Charging Current (max.) 1.0 A 1.0 A 1.0 A 1.0 A Charging Voltage 27.4 VDC ± VDC ± VDC ± VDC ±1 INDICATORS Display Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicator ALARM Battery Mode Low Battery Overload Fault Sounding every 4 seconds Sounding every second Sounding twice every second Continously sounding PHYSICAL Dimension, D x W x H (mm) 380 x 438 x 88 [2U] 480 x 438 x 88 [2U] 480 x 438 x 88 [2U] 600 x 438 x 88 [2U] Net Weight (kgs) ENVIRONMENT Humidity C (non-condensing) Noise Level Less than 1 Meter MANAGEMENT Smart RS-232 / USB Supports Windows, Linux, Unix, and MAC Optional SNMP/Web Interface Power management from SNMP manager and web browser NEXT PARTNUMBERS LOGIX RT LOGIX RT EXB (Battery Extension) NEXT 5+ Warranty Extension (UPS) NEXT 5+ Warranty Extension (EXB) SNMP/Web Interface Product specifications are subject to change without further notice 19

20 Online UPS Display Panel: Logix RT 1-3kVA Logix RT 6-10 kva Rack display Tower display Logix RT 6KVA/10KVA Online UPS Selection Guide MODEL LOGIX RT 6kVA LOGIX RT 10kVA PHASE Single phase with ground CAPACITY 6000 VA / 5400 W VA / 9000 W INPUT Voltage Range Frequency Range Power Factor OUTPUT Nominal Voltage Low Line Transfer Low Line Comeback High Line Transfer High Line Comeback load 50 load load 50 load 300 VAC 290 VAC 46~54 Hz 100 load 200/208/220/230/240 VAC AC Voltage Regulation ± 1 Frequency Range(Synchronized Range) Frequency Range(Batt. Mode) Current Crest Ratio Harmonic Distortion Transfer Time AC mode to Battery mode Battery mode to AC mode Inverter to Bypass Bypass to Inverter Waveform (Batt. Mode) 46~54 Hz 50 Hz ± 0.1 Hz 3:1 (max.) 2 THD (Linear Load), 4 THD (Non-linear Load) Zero Zero Zero Zero Pure Sinewave Line Mode 90 Battery Mode 88 ECO Mode 96 BATTERY Nominal Voltage 240 VDC Battery Type 12 V / 9 AH 12 V / 9 AH Numbers 20 (18-20 pcs adjustable)* 20 (18-20 pcs adjustable)* Charging Current (max.) 1.0 A 1.0 A Float Charging Voltage 273 VDC (based on battery numbers at 20 pcs) INDICATORS Display ALARM Battery Mode Low Battery Overload Fault PHYSICAL Dimension, D x W x H(mm) Net Weight (kgs) ENVIRONMENT Operation Humidity UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions UPS unit: 580 x 438 x 133 [3U] Battery pack: 580 x 438 x133 [3U] UPS unit: 17 Battery pack: 57 Sounding every 4 seconds Sounding every second Sounding twice every second Continously sounding C (non-condensing) UPS unit: 668 x 438 x 133 [3U] Battery pack: 580 x 438 x133 [3U] UPS unit: 20 Battery pack: 63 Noise Level Less than 1 Meter Less than 1 Meter MANAGEMENT Smart RS-232 / USB Optional SNMP NEXT PARTNUMBERS Supports Windows, Linux, Unix, and MAC Power management from SNMP manager and web browser LOGIX RT LOGIX RT EXB (Battery Extension) NEXT 5+ Warranty Extension (UPS) NEXT 5+ Warranty Extension (EXB) SNMP/WEB Interface *When using internal batteries from 18-19, the unit will de-rate according to below formula: P=PRating x N/20 If the UPS is installed or used in a place where the altitude is above than 1000m, the output power must be derated one percent per 100m. Product specifications are subject to change without further notice 20

21 Online UPS Logix II RT NETPACK min Logix II RT VA SNMP WEB Interface II included MODIFIED MODIFIED built-in SINEWAVE SINEWAVE batteries PURE PURE SINEWAVE SINEWAVE 50min RACK&TOWER VERSATILE VERSATILE rack kit N+X DISPLAY OPTIONAL REDUNDANT (Line Mode) (HE Mode) (HE Mode) up 97 to 5min (Line Mode) rack kit built-in batteries True double-conversion online UPS A true double conversion UPS will provide clean, high level quality up power to to fully protect mission-critical devices such as sensitive APFC APFC 20min 20min networks, small computer centers servers, telecom applications, TOUCH TOUCH LOAD as well as for industrial PANEL applications. DISPLAY REDUNDANT LOAD PANEL DISPLAY SUPPORT SUPPORT Output power factor 0.9 N+X N+X Logix RT is a high-density UPS with output power factor up 0.9 to to provide higher performance and efficiency to critical 5min applications. 50min 50min USB USB HID HID OPTIONAL OPTIONAL SNMP/WEB Interface included min All "NETPACK" verions are delivered with SNMP/WEB Interface which comes in your NEXT UPS Systems product package. Integrated power outlets 94 With power outlets directly on the unit, users can easily install 94 multiple devices. Depending on the power rating, outlets are available in IEC C13 (10A) & IEC C19 (16A) (Line Mode) rack rack kit kit (Line Mode) Logix II RT2U 3000 NP built-in built-in batteries batteries 50/60 Hz frequency converter mode Lock output frequency at 50Hz or 60Hz to suit power sensitive equipments. Online ECO mode for energy saving It allows UPS to operate in high efficiency 97 in energysaving ECO mode. In this operation mode, load is supplied by the mains. In the event of a mains failure, the inverter takes over the load and provides supply continuity to the connected systems. INTELLIGENT Charging Management ICM is a technology to extend the life of lead-acid batteries applying sophisticated logic to the charging management. Rack/Tower design Logix RT series is designed in true universal-mount case. It can be easily installed as floor-standing tower or in 19-inch rackmount bracket. Emergency Power Off Function (EPO) This feature can secure the personnel and equipment in case of fires or other emergencies. Hot-swappable battery design This design ensures clean and uninterruptible power to protected equipment during battery replacement. Programmable power management outlets With programmable power management outlets, users can easily and independently control load segments. During power failure, this feature enables users to extend battery time to missioncritical devices by shutting down the non-critical devices. Logix II RT2U 3000 NP Programmable Outlets (P1) - connect to non-critical devices 19" rack-mounting Floor-standing Tower 21

22 Online UPS Logix II RT NETPACK 1-3KVA Online UPS Selection Guide MODEL LOGIX II RT 1000 NETPACK LOGIX II RT 1500 NETPACK LOGIX II RT 2000 NETPACK LOGIX II RT 3000 NETPACK GENERAL FEATURES TYPE Online UPS POWER CAPACITY 1000VA / 900W 1500VA / 1350W 2000VA / 1800W 3000VA / 2700W OUTPUT POWER FACTOR 0.90 Input Voltage Range VAC Depends on Load Level Frequency Range 45Hz - 55Hz or 54Hz - 66Hz INPUT Frequency (Synchronized Range) 45Hz - 55Hz or 54Hz - 66Hz Max THDi <5 Input PF 0.99 at full load OUTPUT Nominal Output Voltage 208/220/230/240 VAC Pure Sine Wave THDv 2 Full Linear Load; 5 Non-Linear Load Voltage Regulation (Bat. Mod.) ±1 Frequency (Battery Mode) ±0,2Hz TECHNICAL DETAILS Load Crest Ratio 03:01 Transfer Time [AC to Battery] 0 ms Transfer Time [Inverter to Bypass] 0 ms Transfer Time [Inverter to ECO] 1 ms Transfer Time [ECO to Inverter] 10 ms Bypass Before UPS Power-on: Default No Change to Yes via display panel / Overload und UPS Failure: Automatically transfer to bypass / By Setting: Voltage Rang: V ± 3 Generator support Overload Capacity >150 External Battery Connection Charger Fan Logic Indicators 1.5 A Always on, automatic speed control UPS status, Load level, Battery level, Input/Output voltage, AC mode, battery mode, Bypass mode, fault conditions; Display colour : Blue, red, red flashing (depends on UPS status), direction swappable (rack/tower) LINE mode full Load BATTERIES AND AUTONOMY Batteries 3 x 12V / 9Ah 4 x 12V / 9Ah 6 x 12V / 9Ah DC Voltage 3 x 12V 4 x 12V 6 x 12V Recharge Time 3h to 90 Full Load Backup Time 5min 4min 3min 92.5 Half Load Backup Time 16min 13min 10min 92.5 CONNECTIONS & COMMUNICATION IEC C13 Outlet 8 8 IEC C19 Outlet - 1 Programmable Outlets Input C14 C20 Software USB port HID Support RS-232 Port Winpower Extension Slot, 1 Dry Contacts EPO Port ENVIRONMENT Noise Level < 45dB Temperature 0 C - 40 C Humidity LOGISTICS Package Content Manual Languages 0-95 RH (non-condensing) UPS, Manual, USB Cable, Input Power Cable, 2x IEC Cable, RS-232 Cable, Tower holder, Rack Ears, EPO Plug, Dry Contacts Plug, SNMP/WEB Interface EAN Width Height 438 mm 86.5 mm Depth 436 mm 608 mm Weight 16.2 kg 19.7 kg 19.7 kg 28.6 kg Giftbox - Width 535 mm 790 mm Giftbox - Height 215 mm 236 mm Giftbox - Depth 535 mm 590 mm Giftbox - Weight 19.2 kg 22.7 kg 31.2 kg Pcs. per box Pcs. per layer Pcs. per pal NEXT PARTNUMBERS LOGIX II Tower NETPACK LOGIX II Tower EXB NEXT 5+ Warranty Extension (UPS) NEXT 5+ Warranty Extension (EXB) Product specifications are subject to change without further notice 22

23 Online UPS Logix II RT NETPACK U 5 6 3U 20min Logix II RT 6000 VA SNMP WEB Interface II included Logix II RT (Line VA Mode) SNMP WEB Interface II included MODIFIED MODIFIED built-in SINEWAVE SINEWAVE batteries PURE PURE SINEWAVE SINEWAVE 50min RACK&TOWER VERSATILE VERSATILE rack kit N+X DISPLAY OPTIONAL REDUNDANT (Line Mode) (HE Mode) (HE Mode) up 97 to 5min (Line Mode) rack kit built-in batteries True double-conversion online UPS A true double conversion UPS will provide clean, high level quality up power to to fully protect mission-critical devices such as sensitive APFC APFC 20min 20min networks, small computer centers servers, telecom applications, TOUCH TOUCH LOAD as well as for industrial PANEL applications. DISPLAY REDUNDANT LOAD PANEL DISPLAY SUPPORT SUPPORT Output power factor 0.9 N+X N+X Logix RT is a high-density UPS with output power factor up 0.9 to to provide higher performance and efficiency to critical 5min applications. 50min 50min USB USB HID HID OPTIONAL OPTIONAL SNMP/WEB Interface included min All "NETPACK" verions are delivered with SNMP/WEB Interface which comes in your NEXT UPS Systems product package. Integrated power outlets 94 With power outlets directly on the unit, users can easily install 94 multiple devices. Depending on the power rating, outlets are available in IEC C13 (10A) & IEC C19 (16A) (Line Mode) rack rack kit kit (Line Mode) built-in built-in batteries batteries LOGIX II RT3U 6000 NP 50/60 Hz frequency converter mode Lock output frequency at 50Hz or 60Hz to suit power sensitive equipments. Online INTELLIGENT Charging Management ICM is a technology to extend the life of lead-acid batteries applying sophisticated logic to the charging management. Rack/Tower design Logix RT series is designed in true universal-mount case. It can be easily installed as floor-standing tower or in 19-inch rackmount bracket. ECO mode for energy saving It allows UPS to operate in high efficiency 97 in energysaving ECO mode. In this operation mode, load is supplied by the mains. In the event of a mains failure, the inverter takes over the load and provides supply continuity to the connected systems. Emergency Power Off Function (EPO) This feature can secure the personnel and equipment in case of fires or other emergencies. Hot-swappable battery design This design ensures clean and uninterruptible power to protected equipment during battery replacement. Independent input for bypass operation This design ensures a seperate input (when available) Active input power factor correction 0.99 for 6kVA and up models This feature will save more energy and its power factor performance is more stable to meet higher environment standards. 19" rack-mounting Floor-standing Tower 23

24 Online UPS Logix II RT 6-10 kva NETPACK Logix II RT NETPACK 6KVA/10KVA Online UPS Selection Guide MODEL LOGIX II 6kVA RT3U NP LOGIX II 10kVA RT5U NP CAPACITY 6000 VA / 5400 W VA / 9000 W Input Voltage Range VAC INPUT Frequency Range 45-55Hz / 54-66Hz OUTPUT Input Wiring Current Distortion (THDi) Single Phase with ground Full Load Output Power Factor 09 Nominal Output Voltage 208/220/230/240 VAC Voltage Regulation +/- 1 Frequency Range(Batt. Mode) 50/60Hz +/-0.1Hz Current Crest Ratio 3:1 Voltage Distortion (THDv) Output Waveform Parallel Operation < 2 THD (Linear Load), < 5 THD (Non-linear Load) Pure Sine Wave Inverter Mode 92 Battery Mode 89 ECO Mode 96 BATTERY Rated Battery Voltage 180 VDC 240 VDC Battery Type 12 V / 5 AH 12 V / 9 AH Number of Internal Battery Charging Current (max.) 1.0 A 1.7 A Recharge Time (to 90) 3 hours 3 hours INDICATORS Display ALARM Battery Mode Low Battery Overload Fault PHYSICAL Dimension, W x H x D(mm) Net Weight (kgs) ENVIRONMENT Operation temperature Noise Level MANAGEMENT Smart RS-232 / USB SNMP/WEB Interface II NEXT PARTNUMBERS YES UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions UPS unit: 438 x 129 x 698 [3U] Battery pack: 580 x 438 x133 [3U] UPS unit: 46 Battery pack: 27 Sounding every 4 seconds Sounding every second Sounding twice every second Continously sounding 0-40 C < 1 Meter Supports Windows, Linux, Unix, and MAC Power management from SNMP manager and web browser UPS unit: 438 x x 704 [5U] Battery pack: 580 x 438 x133 [3U] UPS unit: 82,5 Battery pack: 56,5 LOGIX II RT NP EXB II RT (Battery Extension) NEXT 5+ Warranty Extension (UPS) NEXT 5+ Warranty Extension (EXB) *When using internal batteries from 18-19, the unit will de-rate according to below formula: P=PRating x N/20 If the UPS is installed or used in a place where the altitude is above than 1000m, the output power must be derated one percent per 100m. Product specifications are subject to change without further notice 24

25 Online UPS Lynx LYNX 10/15/20/30/40/60/80/100/120/160/200 kva Online double conversion technology with DSP control Advanced control with Adaptive Feed Forward Cancellation (AFC) technology for very low harmonic distortion Output power factor 0.9 Very low input current distortion (THDi < 1) Input power factor 0.99 at 10 load Output efficiency 95 Space-saving compact design Front access makes maintenance and replacement easily Control designed to withstand all kinds of loads Parallel redundant operation with 4 units Variety of communication options available 5.7" graphic panel design with multiple languates for easy-configuration 2 NEXT Onsite warranty PURE SINEWAVE built-in RACK&TOWER batteries VERSATILE PURE TOUCH SINEWAVE PANEL Online double conversion technology with DSP control Lynx is applied online double conversion technology to APFC effectively 20min insulate against network disturbances and enable TOUCH higher load uptime. TOUCH PANEL REDUNDANT A Digital Signal LOAD Processor (DSP) PANEL DISPLAY SUPPORT control provides an improved solution with high performance USB HID Output power factor 0.9 (HE DISPLAY Mode) rack Lynx is providing output power factor 0.9 with kit higher performance and efficiency. 5min 50min OPTIONAL USB HID 95 N+X 98 OPTIONAL (HE Mode) 12 Advanced 13 control 14 with 16Adaptive Feed 16 Forward Cancellation (AFC) technology for very low harmonic distortion By cancelling input current and output voltage.harmonics, the harmful effects of harmonic injection into the power network is eliminated and it will enhance load integrity Very low input current distortion (THDi < 1) AFC cells are used to achieve extremely low distortion values. Low input current distortion rat THDi < 1 at full load and also THDi < 5 with very small load (10 of load). This will avoid the distortion of the electrical network upstream of the UPS, resulting in savings from the optimal use of the cables and protection devices in the electrical network min 92 built-in batteries 93 6 Space-saving compact design The use of transformerless technology allows a considerable 94 reduction of the weight and volume of the units. (Line Over Mode) 60 (Line materials Mode) recyclable The UPS uses more than 60 recyclable materials for being more respectful of the environment. rack Front kit access makes maintenance and replacement easily built-in batteries An important consideration has been given to allow generous 17 access to the unit s electronic cards and power components. All the boards are accessible by front panel for easily maintenance and replacement. Parallel redundant operation with 4 units Up to 4 units in parallel can be operated without additional hardware, to accommodate increases in power demand as well as to attain power redundancy with high system integrity. Online Input power factor 0.99 at 10 load Lower power losses would result in reduced consumption, lower operation and maintenance costs. Output efficiency 95 Applied with DSP controller and the forth generation IGBT transistors, the UPS can achieve high efficiency of 95. It will save consumed energy due to lower heat losses and make a longer lifespan for the critical components of the unit. 25

26 Online UPS Lynx External Battery Cabinet Battery 9Ah Battery 12Ah Dimensions, D x W x H (mm) 700 x 450 x 1100 Battery Type (2 x 31) 12 V / 9 Ah 12 V / 12 Ah Net Weight (Kg) 180kg 250kg Battery 26Ah Battery 40Ah Dimensions, D x W x H (mm) 805 x x Battery Type (2 x 31) 12 V / 26 Ah 12 V / 40 Ah Net Weight (Kg) 710kg 1020kg LYNX Battery Cabinet MODEL PHASE Lynx 10kVA Lynx 15kVA Lynx 20kVA Lynx 30kVA Lynx 40kVA Lynx 60kVA 3 phase in / 3 phase out Lynx 80kVA Lynx 100kVA Lynx 120kVA Lynx 160kVA Lynx 200kVA CAPACITY 10KVA/ 9KW 15KVA/ 13,5KW 20KVA/ 18KW 30KVA/ 27KW 40KVA/ 36KW 60KVA/ 54KW 80KVA/ 72KW 100KVA/ 90KW 120KVA/ 108KW 160KVA/ 144KW 200KVA/ 180KW INPUT Nominal Voltage 3 x 400V (3Ph + N) Acceptable Voltage Range +15 or -20 Frequency 50 Hz ±5 Voltage Range < 1,5@ 100 load < 50 load < 6,0@ 10 load < 1,0@ 100 load < 50 load < 5,0@ 10 load < 1,5@ 100 load < 50 load < 6,0@ 10 load Current Limitation High overload: PFC limit (discharging batteries) Power Factor 1.0 INVERTER Nominal Voltage 3 x 400V (3Ph + N) Precision Frequency Max. Synchronisation Speed Waveform TotalHarmonic Distortion (THDv) Phase Displacement Dynamic recovery time Admissible Overload Stationary: ± 1, Transitory: ± 2 (load variations ) 50 Hz synchronised ±4,with mains absent ±0,05 ±10 Hz/s Pure Sinewave < 0,5 (Linear Load) ; < 1,5 (Non-linear Load) 120 ±1 (balanced load); 120 ±2 (imbalances 50 of the load) 10 ms. at 98 of the static value Phase Overload: 125 for 10 min., 150 for 60s; Total Overload: 112,5 for 10 min., 135 for 60s Admissible Crest Factor 3.4:1 3.2:1 2.8:1 3.2:1 3.0:1 Admissible Power Factor 0,7 inductive to 0,7 capacitive Imbalance Output 100 Unbalanced load <1 Current Limit High overload, short-circuit: RMS Voltage Limit; High Crest-Factor current: Peak Voltage Limit STATIC BYPASS Type Solid state Voltage 3x400V (3Ph + 0) Frequency 50 Hz Activation Criterion Microprocessor control Transfer Time zero Admissible overload 400 for 10 sec Transfer to bypass Immediate, for overloads above 150 Retransfer Automatic after alarm clear MAINTENANCE BYPASS Type Without interruption Voltage 3x400V (3Ph + 0) Frequency 50 Hz Overall Efficiency BATTERY Standard Model PHYSICAL Standard Model ENVIRONMENT Built-in Battery Type 12 V / 9 Ah - Numbers 62 pcs - Charging Current (max.) 23,5A 47A 70,5A 188A Dimension, D x W x H(mm) 770 x 450 x x 900 x x 900 x 1900 Net Weight (kgs) Humidity C (non-condensing) Noise Level Less than 1 Meter Less than 1 Meter MANAGEMENT Smart RS-232 / USB Supports Windows, Linux, Unix, and MAC SNMP/Web Interface Power management from SNMP manager and web browser NEXT PARTNUMBERS LYNX LOGIX EXB (Battery Extension) Product specifications are subject to change without further notice 26

27 Lynx II Modular Modular Online double conversion technology UPS Output power factor 0.9 Hot-Swappable UPS module with wireless design N+X parallel redundant configuration which leaves no SPOF (Single Point Of Failure) Optimized performace with >93 efficiency Space saving compact design Variety of communications options available Flexible battery type configuration 7" graphic panel design with multiple languates for easy-configuration 2 NEXT Onsite warranty LYNX II Power Module 15kVA Online PURE SINEWAVE built-in RACK&TOWER batteries VERSATILE 95 PURE TOUCH SINEWAVE PANEL 98 (HE DISPLAY Mode) LYNX II MODULAR Series feature all benefits of modern UPSs like high power factor 0.9, zero transfer time, three additional up intelligent to slots for N+X extension cards, APFCpure sine wave 94 output 20min with <2 THD with linear load. TOUCH TOUCH PANEL REDUNDANT LOAD PANEL DISPLAY SUPPORT External battery input is flexible allowing selecting from 32 to batteries 8 per set, 10 which 9 you 11 can change 10 with 7 full 11colour panel. USB HID 50min OPTIONAL USB HID 5min OPTIONAL min built-in batteries This series is the best for redundant backup management, system with N+2 modules inserted increases availability of the UPS system over and its MTBF (Mean Time Between Fails) over 10mln hours! Everything is possible without cables and any setup, just pull out failed module and insert replacement, or simply install more modules in free slots. 17 rack kit Modular on-line UPS allows selecting desired power rating in range of 15kVA to 150kVA ( 10 modules of 15kVA). 94 Modules are working in parallel without any need for extra cabling, synchronization or setup. 92 Additionally, modules are hot-swappable, which means you can rack insert another module even when UPS is fully energized kit and working. There are four types of cabinets rated to 60kVA, 90kVA, 120kVA built-in batteries and 150kVA (different cabling, MBS rating etc), all of them are 17 the same size and can fit 10 modules, so for example 90kVA cabinet with 10 modules will work in parallel 6+4 system. Six modules (6x15kVA=90kVA rated) are enough to support the load and additional four are serving as redundant backup. If any module fails, you can easily unplug it and replace without interruption for the operation. The cabinets are top wired and they support dual input. 27

28 Online UPS Lynx II Modular 60KVA-150KVA Online UPS Selection Guide MODEL LYNX II 60 kva MODULAR LYNX II 90 kva MODULAR LYNX II 120 kva MODULAR LYNX II 150 kva MODULAR GENERAL FEATURES Type UPS Online UPS Power Capacity 60000VA / 54000W 90000VA / 81000W VA / W VA / W Output Power Factor 0.90 INPUT Input Voltage Range VAC Dual Input INPUT Max THDi <5 Input PF 0.99 at full load Frequency Range 40Hz - 70Hz (self-adaptive to 50/60Hz) OUTPUT Nominal Output Voltage 353/380/400/415VAC Pure Sine Wave THDv 2 Full Linear Load; 4 Non-Linear Load TECHNICAL DETAILS Transfer Time [AC to Battery] 0ms Generator support Overload Capacity ; ; >150 External Battery Connection Charger 3,5A BATTERY & AUTONOMY Batteries Designed to work with external batteries. Batteries are not included. DC Voltage x 12V CONNECTIONS AND COMMUNICATION Terminal Output 1 Input Terminal Software Winpower USB port Yes RS-232 Port Yes Extension Slot Yes, 3 Dry Contacts Yes EPO Port Yes ENVIRONMENT Noise Level < 75 load Temperature 0-40 C Humidity 5-90 RH (non-condensing) LOGICTICS Smart RS-232 / USB Supports Windows, Linux, Unix, and MAC SNMP/WEB Interface II Power management from SNMP manager and web browser NEXT PARTNUMBERS LYNX II MODULAR BTO BTO LYNX II MODULAR Power Module 15 kva Product specifications are subject to change without further notice 28

29 Accessory NEXT PDU / apdu / ipdu NEXT PDU (Basic PDU) The perfect solution for improving availability and adding flexibility for single phase UPSs. NEXT apdu (Amp/Volt metered PDU) NEXT apdu(amp/volt metered Power Distribution Units (PDUs)) provide active metering to enable energy optimization and circuit protection. Amp/Volt metered PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. NEXT apdu series include local real Amp/Volt monitoring, IEC-lock receptacles. Having the right connectors just where you need them NEXT PDU (Power Distribution Units) are flexible mounting multiway socket blocks for easy connection of multiple loads either as free-standing or on rack-mounted UPSs NEXT PDUs have a large number of sockets (7 French (BE/FR) or 8 Schuko (NL/LU) or 8 IEC-LOCK ) which fit into a very compact unit (1U - 19 ) NEXT PDUs are easy to implement into any type of installation: they can be rack mounted horizontally (1U) or vertically Integrated IEC-LOCK Plug Retention: Prevents accidental disconnect from being bumped or from vibration (IEC version only). Having the right connectors just where you need them Active local Amp/Volt monitoring Technical specifications PDU & apdu Maximum power NEXT PDU 16A Nominal Voltage V INSTALLATION Format INSTALLATION Format Dimensions H x W x D CONNECTION Inputs MONITORING NEXT apdu 1,5U (except BS) 19 rack-mounting with multi-position mountings 19 rack or wall mounting 62 x 490 x 46 mm 1 IEC C20 (16 A) connector and 1 cables (1 IEC LOCK - C19 16 A - IEC 10 A cable) for connection to any UPS Amp (TOTAL) - Voltage (TOTAL) - OUTPUTS BE/FR 7 6 NL/LU 8 7 IEC-LOCK 8 7 NEXT PARTNUMBERS BE/FR OUTLETS NL/LU OUTLETS IEC-LOCK OUTLETS NEXT apdu (Power Distribution Units) are flexible mounting multiway socket blocks for easy connection of multiple loads either as free-standing or on rack-mounted UPSs NEXT apdus have a large number of sockets (6 French (BE/FR) or 7 Schuko (NL/LU) or 7 IEC-LOCK ) which fit into a very compact unit (1U - 19 ) NEXT apdus are easy to implement into any type of installation: they can be rack mounted horizontally (1U) or vertically Integrated IEC-LOCK Plug Retention: Prevents accidental disconnect from being bumped or from vibration (IEC version only). Accessory Product specifications are subject to change without further notice 29

30 Accessory NEXT ipdu (Intelligent PDU) NEXT ipdu s (Power Distribution Units) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment to avoid circuit overload. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. Users can access, configure, and control ipdus through secure Web, SNMP, Command Line Interface, or Telnet Interfaces. New NEXT ipdus include real power monitoring, a temperature/humidity sensor port, and IEC-LOCK receptacles. Easy Configuration: includes central advanced display with menu system (0U ipdu). Central Communication and Alerts: Read Current, Voltage, Power, kwhr and more, Interface allows easy identification of alerts. Easily monitor the status of your power distribution on the (OU ipdu), via the web interface or via your management software. ipdus are available in 0U to fit vertically on the back of a rack, or in 1U to be mounted horizontally in any server rack. Ensure the ipdu, plugs and cables are completely out of the way of equipment with button mount on the rear and sides. Choose to raise or lower the epdu in the rack to suit your installation Active monitoring per outlet NEXT ipdus have a large number of sockets : - 8 IEC-LOCK C13 (1U ipdu) which fit into a very compact unit (1U - 19 ) - 12 IEC-LOCK C13 & 4 IEC-LOCK C19 (0U ipdu) NEXT ipdus are easy to implement into any type of installation: they can be rack mounted horizontally (1U) or vertically (0U) Integrated IEC-LOCK Plug Retention: Prevents accidental disconnect from being bumped or from vibration (IEC version only). Technical specifications ipdu MODEL NEXT ipdu 1U (Horizontal) NEXT ipdu 0U (Vertical) PHYSICAL Dimensions 445x485x x67x76 Mounting style horizontaly / under a surface vertical only INSTALLATION Format INPUT 1,5U (except BS) 19 rack-mounting with multi-position mountings Max kw Plug (1) IEC-320-C20 (1) IEC-309 Cable Length (m) 2 Voltage 230V Current Phase Frequency OUTPUT Grip cable retention PROTECTION & FILTERING Spike/Surge Suppression EMI/RFI Filter OUTLETS Single Phase 50Hz Yes (IEC LOCK) none none IEC-320-C IEC-320-C19-4 Outlet Control CONTROL & INTERFACE Daisy Chain 2 ipdu s 1U 5 ipdu s 0U Yes Operating Temperature 60 C Hot Swap Network & Control - Communication & Protocols Optional Temperature and Humidity probe HTTP, SSL, Telnet, FTP, SNMP, SMTP, DNS, DHCP Termal SENSOR for ipdu Serial Interface no Environmental Interface Ethernet Interface Voltage Monitoring METERING AND SWITCHING Metering Characteristics V, W, A and kwhr, Active power, Apparent Power, Peak Power Metering Accuracy ± 1 Circuit breaker status monitoring Switching Standard Warranty NEXT PARTNUMBERS Outlet and Equipment Switching 2 NEXT ipdu NEXT ipdu Termal Sensor Product specifications are subject to change without further notice 30

31 Accessory NEXT IEC Lock Powercables IEC-C20 (M) -> IEC-C19(F) NEXT Part # IEC-C14 (M) -> IEC-C19(F) NEXT Part # EU PLUG (M) -> IEC-C19(F) NEXT Part # IEC-C20 (M) -> IEC-C13(F) NEXT Part # IEC-C14 (M) -> IEC-C13(F) NEXT Part # Technical specifications IEC Lock Powercables EU PLUG (M) -> IEC-C13(F) NEXT Part # Accessory MODEL CABLE SIZE NEXT IEC LOCK Power Cables 10A NEXT IEC LOCK Power Cables 16A Section 3 x 1.00 mm 2 H05 V V-F 3 x 1.50 mm 2 H05 V V-F CABLE COLOUR Colour CABLE LENGTH Length in meter TEST INFORMATION Test Body BLACK 2 m KEMA, UL, SAA, KC, PSE Test Standard IEC/EN NEXT PARTNUMBERS INPUT OUTPUT NEXT IEC-LOCK Power Cable IEC-C20 (M) IEC-C19 (F) NEXT IEC-LOCK Power Cable IEC-C14 (M) IEC-C19 (F) NEXT IEC-LOCK Power Cable EU PLUG (M) IEC-C19 (F) NEXT IEC-LOCK Power Cable IEC-C20 (M) IEC-C13 (F) NEXT IEC-LOCK Power Cable IEC-C14 (M) IEC-C13 (F) NEXT IEC-LOCK Power Cable EU PLUG (M) IEC-C13 (F) Product specifications are subject to change without further notice 31

32 Accessory NEXT Maintenance Bypass Switch Rack Type Rack Type - HW for 6-10kVA UPS Desktop Type 16A for 208/220/230/240 VAC, 20A for 110/115/120/127 VAC Provides continuous power to connected equipment during UPS maintenance Easy operation with simple rotary switch and indicators Master-slave function for energy saving Provides a large number of sockets for extended usage Provides rack and tower designs to fit into a diverse working environment Simple installation with plug-and-play socket type Suitable for all UPSs 3KVA System Configuration: Master output socket (16 A) IEC 16A socket connecting UPS output Slave output sockets (10 A) Rotary bypass switch IEC 16A socket connecting UPS input IEC 16A input socket Circuit breaker Master/Slave function switch Master output socket (10 A) PDU & Maintenance Bypass Switch Selection Guide MODEL HotSwap MBS-Rack HotSwap MBS-Desktop Current Rating 16 A max. for 208/220/230/240 VAC / 20 A max. for 110/115/120/127 VAC Voltgae Rating Master/Slave Function CONNECTION Input Output PHYSICAL Yes. When power consumption in Master outlet is lower than 20W (± 5W), it will shut off the power for slave outlets. 208/220/230/240 VAC or 110/115/120/127 VAC AC Power 1 x IEC (16 A) connector and 1 x customized plug cable UPS Input 1 x IEC (16 A) connector and 1 x cable (16A - 10A IEC cable for 1K/2K, 16A - 16A IEC cable for 3K) UPS Output 1 x IEC (16 A) connector and 1 x cable ( 16A - 10A IEC cable for 1K/2K, 16A - 16A IEC cable for 3K) IEC 5 x IEC 10A sockets + 1 x IEC 16A socket (with 2 circuit breakers) N/A 8 x IEC 10A sockets + 1 x IEC 16A socket (with 2 circuit breakers) Schuko (NL/LU) 4 x Schuko 16A scokets 4 x Schuko 16A sockets USE (BE/FR) 4 x USE 16A scokets 4 x USE 16A scokets HW HW P+N HW P+N IEC 80 x 438 x x 160 x 50 Dimension, Schuko D x W x H(mm) UK 80 x 438 x x 200 x 50 NEMA 80 x 438 x x 160 x 50 Net Weight (kgs) ENVIRONMENT Operating Temperature NEXT PARTNUMBERS C (non-condensing) HotSwap Bypass IEC HotSwap Bypass BE/FR HotSwap Bypass NL/LU HotSwap Bypass HW (6/10 kva) N/A Product specifications are subject to change without further notice 32

33 Accessory Automatic Transfer Switch (ATS)16A 16A max. input current Powered by two separately independent power sources Dual power supply for redundancy Provides seamless power switch for IT equipment Preferred source selection on front panel Highly reliablity 19" rack design (1U) to fit into a diverse working environment Built-in USB and RS-232 communications System Configuration: Power On/Off switch for input Output breaker for IEC-C13 Source preference selector Priority setting LEDs Output source LEDs Intelligent slot Mute button USB communication port Fault LED RS-232 communication port Input source availability LEDs Automatic Transfer Switch Selection Guide MODEL ATS 16 INPUT Input Voltage Acceptable Input Voltage Input Frequency Maximum Input Current OUTPUT Output Voltage Maximum Output Current CONNECTION Input Output Communication Transfer time PHYSICAL 220/230/240 VAC VAC 50 Hz / 60 Hz 16 A 220/230/240 VAC 10 A for IEC-C13 outlets 16 A for IEC-C19 outlet 2 x IEC-C20 inlets 8 x IEC-C13 1 x IEC-C19 USB/RS ms (Typical) Dimension, D X W X H (mm) 330 X 483 X 44 Net Weight (kgs) 5 Net Weight (including accessories) (kgs) 8 ENVIRONMENT Operating Temperature NEXT PARTNUMBERS C (non-condensing) ATS 16A Accessory * Product specifications are subject to change without further notice 33

34 Software Release v3 NEXT UPS Systems All Rights Reserved Software Release v3 NEXT UPS Systems All Rights Reserved Accessory / Software NEXT Software NEXTVision - UPS Management Software * Allows control and monitoring of multiple UPSs via LAN and INTERNET * User-friendly power analysis graphs * Real-time dynamic graphs of UPS data * Safely OS shutdown and protection from data loss during power failure * Warning notifications via audible alarm, broadcast, mobile messenger, and * Scheduled UPS on/off, battery test, programmable outlet control, and audible alarm control * Password security protection and remote access management * Supports multiple OS and local languages NEXT Accessory Remote Control & Monitoring Agent WEB/SNMP Card (Integrated with NEXTVision Pro) + + SNMP WEB Interface SNMP WEB Interface II * Allows control and monitoring of multiple UPSs through network connection * Real-time dynamic graphs of UPS data (voltage, frequency, load level, battery level) * Warning notifications via audible alarm, broadcast, mobile messenger, and SNMP traps * Historic data log stored in centralized PC database * Simple firmware upgrade with one click * Password security protection and remote access management * Supports optional environmental monitoring detector for temperature, humidity and smoke * 3-year product warranty 9-pin interface EMD RS-232 interface NEXT AS-400 Card * Capable of selecting the status of the dry-contact signal by setting jumper to meet different application requirements. * Suitable applications: IBM Server, Personal PC & Workstations equipments, Auto-controlled industrial equipment & communication applications NEXT EMD * NEXT UPS Systems EMD (environmental monitoring device) for SNMP Manager is a connectivity device to remote monitor temperature and humidity via SNMP manager. It provides four dry contacts to receive signals from 4 compatible devices such as security system or alarm system. Rackmount Slider PDU & Maintenance Bypass Switch External Maintenance Bypass Switch Simple installation for mounting LOGIX RT Rack in your server rack enclosure. *Please see page 23 for detailed spec. 34

35 Accessory / Software NEXT Remote Monitoring & Management SNMP/WEB Card SNMP/WEB Card Allows control and monitoring of multiple UPSs through network connection Real-time dynamic graphs of UPS data (voltage, frequency, load level, battery level) Warning notifications via audible alarm, broadcast, mobile messenger, and SNMP traps Historic data log stored in centralized PC database Simple firmware upgrade with one click Password security protection and remote access management Supports optional environmental monitoring detector for temperature, humidity and smoke 3-year product warranty SNMP WEB Interface II Modbus Card Modbus Card Real-time control and monitoring of multiple UPSs or inverters via RS-485 communication port Supports Modbus RTU protocol Provides MODBUS functions including read Holding Registers and write Registers Provides surge protection Software NEXTVision Pro for UPS Software Accessory NEXTVision Pro is UPS management software which is perfect for home users and enterprises. It can monitor and manage from one to multiple UPSs in a networked environment including LAN, INTERNET and Modbus networks. Integrated with Shutdown Wizard, it can not only prevent data loss from power outage and safely shutdown systems, but also store programming data and scheduled shut down UPSs. All UPS working data and event records can be kept in local database system. Mobile version 35

36 Warranty NEXT UPS Products Warranty OPTIONAL YEAR O N - S I T E NEXT UPS products - standard 2-year on-site warranty YEAR O N - S I T E NEXT UPS products - standard 3-year on-site warranty YEAR ON-SITE NEXT UPS products - optional 5-year on-site warranty NEXT UPS Systems single Phase products come with a standard 3 year onsite warranty. Optional Warranty extensions 5 are available for every single phase model. NEXT UPS Systems Three Phase products come with a standard 2 year onsite warranty. Optional Warranty extensions are available for every model, a tailored made maintenance contract is avalable on simple request. All NEXT UPS Systems single phase products grants your peace of mind for 3 thanks to: UPS standard exchange on site Professional help-line Fast and efficient service wherever you are located The standard warranty on single phase products is 36 months. During this 3 period your single pahse UPS is covered by a standard exchange in the best timing conditions (depending on location, this can be between 48 & 72 hours). Logistic costs for shipping back your old UPS and delivering the new one will be covered by NEXT UPS Systems. You will take advantage of a professional help-line who will grant you support thanks to the intervention of NEXT UPS Systems professionals. NEXT UPS Systems SERVICE OFFERING With the ready-to-use Service Pack (NEXT 5+ ), you receive solutions that are customized and adapted to your needs. Every Service Pack provides you with the best service levels adapted to your needs. NEXT Warranty extension pack (available for single phase products only) DESCRIPTION NEXT STD Warranty NEXT 5+ Warranty STANDARD Warranty 3 (from purchase date) Warranty extended from 3 to 5 Please check our NEXT 5+ Warranty selection guide on our website : 36

37 Battery Replacement NEXT Battery Replacement NEXT UPS Systems offers replacement batteries for all uninterruptible power supplies as well as battery replacement services for NEXT products or other UPS brands. Making sure your IT equipment or application is running 24x7 is important and making sure that your uninterruptible power supply (UPS) system is operating at optimal efficiency is key to keeping your IT equipment or application running. The UPS battery is the most vulnerable part of any UPS, regardless of capacity, topology or brand. The battery is ultimately at the heart of the UPS in terms of reliability. Our NEXT UPS battery replacement philosophy is designed to make a battery replacement easy, fast & cost effective. If you would like more information about NEXT battery replacement, UPS battery installation or any other UPS battery services, please contact us at sales@nextups.eu or visit our website : Try to maintain your batteries in a stable temperature environment (@ 18 c), it will optimize your battery lifetime on any UPS. Please check our battery selector on our website for the right battery! NEXT Battery Replacement DESCRIPTION Standard replacement of old battery Direct on-site delivery of new battery kit 1-year warranty on new battery NEXT Battery Logistic costs for shipping back your NEXT Battery and delivering the new one will be covered by NEXT UPS Systems! Warranty For more information on Eurobat, and our own battery & sustainability policy, see page