XSP Series XSP1 LED Street/Area Luminaire Single Module Version C
|
|
- Vincent Jordan Dalton
- 5 years ago
- Views:
Transcription
1 XSP Series XSP LED Street/Area Luminaire Single Module Version C Product Description Designed from the ground up as a totally optimized LED street and area lighting system, the XSP Series delivers incredible efficiency without sacrificing application performance. Beyond substantial energy savings and reduced maintenance, Cree achieves greater optical control with our NanoOptic Precision Delivery Grid optic when compared to traditional cobra head luminaires. The XSP Series is the better alternative for traditional street and area lighting with quick payback and improved performance. Applications: Roadway, parking lots, walkways and general area spaces formance Summary NanoOptic Precision Delivery Grid optic 3.7" (6m) Assembled in the U.S.A. of U.S. and imported parts CRI: Minimum 70 CRI CCT: 3000K (+/- 300K); 4000K (+/- 300K); 5700K (+/- 500K) Limited Warranty : 0 years on luminaire/0 years on Colorfast DeltaGuard finish See for warranty terms 5." (9mm) Accessories Field-Installed Backlight Control Shield XA-SPBLS - Provides / mounting height cutoff Bird Spikes XA-SPBRDSPK 9.3" (37mm) Ordering Information Example: BXSP-C-HT-ME-EUL-BZ BXSP C HT E Voltage Weight 0-77V 4.5 lbs. (6.6kg) V 9.5 lbs. (8.8kg) Product Version Mounting Optic CCT Voltage Color Options Options BXSP C HT Horizontal Tenon LG* Type II Long ME* Type II Medium 3ME* Type III Medium 4ME* Type IV Medium E 0W 3000K 40K 4000K 57K 5700K UL Universal 0-77V UH** Universal V BK Black BZ Bronze SV Silver WH White G Small Four Point Mounting Mounts to.5" (3mm) IP,.66" (4mm) O.D. horizontal tenon J Large Four Point Mounting Mounts to " (5mm) IP,.375" (6m) O.D. horizontal tenon N-Q9/Q8/Q7/Q6/Q5/Q4 Utility Label, NEMA 7-Pin Photocell Receptacle & Field Adjustable Output Must select Q9, Q8, Q7, Q6, Q5 or Q4 Settings Q3-Q are not available with N option External wattage label per ANSI C35 based on Q setting selected 7-pin receptacle per ANSI C36.4 Factory connected 0-0V dim leads Photocell and shorting cap by others / may only be adjusted down in the field Refer to page 6 for power and lumen values Q9/Q8/Q7/Q6/Q5/Q4/Q3/Q/Q Field Adjustable Output Must select Q9, Q8, Q7, Q6, Q5, Q4, Q3, Q, or Q / are fully adjustable in the field Refer to page 6 for power and lumen values R NEMA 7-Pin Photocell Receptacle 7-pin receptacle per ANSI C36.4 Factory connected 0-0V dim leads Photocell and shorting cap by others UTL Utility Label Includes exterior wattage label per ANSI C35 that indicates the maximum available wattage of the luminaire * Available with Backlight Shield when ordered with field-installed accessory (see table above) ** V utilizes magnetic step-down transformer. For input power for V, refer to the Electrical Data table Rev. Date: V7 0/9/07 US: lighting.cree.com T (800) F (6) Canada: T (800) F (800)
2 XSP LED Street/Area Luminaire Single Module Version C Product Specifications CONSTRUCTION & MATERIALS Die cast aluminum housing Tool-less entry Mounts on.5" (3mm) IP,.66" (4mm) O.D. or " (5mm) IP,.375" (6m) O.D. horizontal tenon (minimum 8" [03mm] in length) and is adjustable +/- 5 to allow for fixture leveling (includes two axis T-level to aid in leveling) Luminaire secures with two mounting bolts standard; optional four point mounting available Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Black, bronze, silver and white are available Weight: 0-77V: 4.5 lbs. (6.6kg); V: 9.5 lbs. (8.8kg) ELECTRICAL SYSTEM Voltage: 0-77V or V, 50/60Hz Factor: > 0.9 at full load Total Harmonic Distortion: < 0% at full load Class driver Integral 0kV surge suppression protection standard When code dictates fusing, a slow blow fuse or type C/D breaker should be used to address inrush current Designed with 0-0V dimming capabilities. Controls by others 0V Source Current: 0.5mA REGULATORY & VOLUNTARY QUALIFICATIONS culus Listed Suitable for wet locations Certified to ANSI C , 3G bridge and overpass vibration standards Meets CALTrans 6 Vibration testing 0kV surge suppression protection tested in accordance with IEEE/ANSI C6.4. Meets FCC Part 5, Subpart B, Class A standards for conducted and radiated emissions Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 7 Meets Buy American requirements within ARRA RoHS compliant. Consult factory for additional details Dark Sky Friendly, IDA Approved when ordered with CCT. Please refer to for most current information Electrical Data* System Watts 0-77V System Watts V Total Current (A) 0V 08V 40V 77V 347V 480V E * Electrical data at 5 C (77 F). Actual wattage may differ by +/- 0% when operating between 0-480V +/- 0% XSP Series Version C Ambient Adjusted Lumen Maintenance Ambient 5K hr Projected 50K hr Projected 75K hr Calculated 3 5 C (4 F) C (50 F) C (59 F) C (68 F) C (77 F) K hr Calculated 3 Lumen maintenance values at 5 C (77 F) are calculated per TM- based on LM-80 data and in-situ luminaire testing. Luminaire ambient temperature factors (LATF) have been applied to all lumen maintenance factors In accordance with IESNA TM, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) 3 In accordance with IESNA TM, Calculated Values represent time durations that exceed six times (6X) the IESNA LM total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) US: lighting.cree.com T (800) F (6) Canada: T (800) F (800)
3 XSP LED Street/Area Luminaire Single Module Version C Photometry All published luminaire photometric testing performed to IESNA LM standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: LG Type II Long Distribution 3000K 4000K 5700K E 6,86 B U0 G 8,35 B U0 G 8,74 B U0 G 30 horizontal angle CESTL Test Report #: PL BXSP-C-**-LG-EUL Lumens: 6,944 BXSP-C-**-LG-EUL Mounting Height: 5' (7.6m) A.F.G. Lumens: 6,86 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: Type II Long w/bls Distribution 3000K 4000K 5700K E 5,08 B U0 G 6, B U0 G 6,43 B U0 G horizontal angle 30 CESTL Test Report #: PL BXSP-C-**-LG-EUL w/xa-spbls Lumens: 5,30 BXSP-C-**-LG-EUL w/xa-spbls Mounting Height: 5' (7.6m) A.F.G. Lumens: 5,08 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: ME Type II Medium Distribution 3000K 4000K 5700K 30 horizontal angle RESTL Test Report #: PL A BXSP-C-**-ME-E-40K-UL Lumens: 8,740 BXSP-C-**-ME-E-40K-UL Mounting Height: 5' (7.6m) A.F.G. Lumens: 8,407 FC at grade E 6,89 B U0 G 8,407 B U0 G 8,80 B U0 G * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: Type II Medium w/bls Distribution 3000K 4000K 5700K E 5,55 B U0 G 6,750 B U0 G 7,075 B U0 G 30 horizontal angle RESTL Test Report #: PL A BXSP-C-**-ME-E-40K-UL w/xa-spbls Lumens: 6,759 BXSP-C-**-ME-E-40K-UL w/xa-spbls Mounting Height: 5' (7.6m) A.F.G. Lumens: 6,750 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: US: lighting.cree.com T (800) F (6) Canada: T (800) F (800)
4 XSP LED Street/Area Luminaire Single Module Version C Photometry All published luminaire photometric testing performed to IESNA LM standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: 3ME Type III Medium Distribution 3000K 4000K 5700K 30 horizontal angle RESTL Test Report #: PL A BXSP-C-**-3ME-E-40K-UL Lumens: 8,708 BXSP-C-**-3ME-E-40K-UL Mounting Height: 5' (7.6m) A.F.G. Lumens: 8,4 FC at grade E 6,74 B U0 G 8,4 B U0 G 8,68 B U0 G * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: Type III Medium w/bls Distribution 3000K 4000K 5700K 30 horizontal angle RESTL Test Report #: PL A BXSP-C-**-3ME-E-40K-UL w/xa-spbls Lumens: 6,086 BXSP-C-**-3ME-E-40K-UL w/xa-spbls Mounting Height: 5' (7.6m) A.F.G. Lumens: 6,00 FC at grade E 5,000 B U0 G 6,00 B U0 G 6,400 B U0 G * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: 4ME Type IV Medium Distribution 3000K 4000K 5700K E 6,86 B U0 G 8,35 B U0 G 8,74 B U0 G horizontal angle 30 CESTL Test Report #: PL BXSP-C-**-4ME-EUL Lumens: 6,93 BXSP-C-**-4ME-EUL Mounting Height: 5' (7.6m) A.F.G. Lumens: 6,86 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: Type IV Medium w/bls Distribution 3000K 4000K 5700K E 5,38 B U0 G 6,488 B U0 G 6,807 B U0 G horizontal angle 30 CESTL Test Report #: PL BXSP-C-**-4ME-EUL w/xa-spbls Lumens: 5,530 BXSP-C-**-4ME-EUL w/xa-spbls Mounting Height: 5' (7.6m) A.F.G. Lumens: 5,38 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: US: lighting.cree.com T (800) F (6) Canada: T (800) F (800)
5 XSP LED Street/Area Luminaire Single Module Version C Luminaire EPA Horizontal Tenon Mount Weight: 0-77V: 4.5 lbs. (6.6kg); V: 9.5 lbs Tenon Configuration If used with Cree tenons, please add tenon EPA with luminaire EPA PD-H4; PT-H PD-H4(90); PT-H(90) PD-H4(80); PT-H(80) PD-3H4(90); PT-3H(90) PD-4H4(90); PT-4H(90) Tenon EPA Part Number EPA PD Series Tenons 0.09 PT Series Tenons 0.0 WM-L 0.3 XA-TMDA8 0.9 Tenons and Brackets (must specify color) Square Internal Mount Horizontal Tenons (Aluminum) - Mounts to 4" (0mm) square aluminum or steel poles PD-H4 Single PD-3H4(90) Triple PD-H4(90) Twin PD-4H4(90) Quad PD-H4(80) 80 Twin Wall Mount Brackets - Mounts to wall or roof WM-L Extended Horizontal Round External Mount Horizontal Tenons (Aluminum) - Mounts to.375"-3" (60-76mm) O.D. round aluminum or steel poles or tenons - Mounts to 3" (76mm), 5" (7mm), or 6" (5mm) square pole with PB-A* tenon PT-H Single PT-3H(90) Triple PT-H(90) Twin PT-4H(90) Quad PT-H(80) 80 Twin Direct Arm Pole Adaptor Bracket - Mounts to 3-6" (76-5mm) round or square aluminum or steel poles XA-TMDA8 Refer to the Bracket and Tenons spec sheet for more details * Specify pole size: 3 (3"), 5 (5"), or 6 (6") for single, double or triple luminaire orientation or 5 (5") or 6 (6") for quad luminaire orientation US: lighting.cree.com T (800) F (6) Canada: T (800) F (800)
6 XSP LED Street/Area Luminaire Single Module Version C Field Adjustable Output (Q9/Q8/Q7/Q6/Q5/Q4/Q3/Q/Q) Option Description: The Field Adjustable Output option enables luminaires within the XSP Series on this page to be tuned to the exact needs of a particular application through multiple levels of adjustment. When a setting other than Q9 is specified with the N option, that setting becomes the maximum wattage of the luminaire, and a NEMA label reflecting this wattage is affixed to the luminaire. Lumen output and power consumption can only be adjusted downward from the maximum wattage. Q Option & Lumen Data Q Option Setting CCT System Watts Lumen Values 0-77V V LG ME 3ME 4ME LG w/bls ME w/bls 3ME w/bls 4ME w/bls 6,86 6,89 6,74 6,86 5,08 5,55 5,000 5, K ,35 8,407 8,4 8,35 6, 6,750 6,00 6,488 57K 8,74 8,80 8,68 8,74 6,43 7,075 6,400 6,807 6,6 6,684 6,539 6,6 4,867 5,359 4,850 5, K ,066 8,55 7,977 8,066 5,938 6,548 5,97 6,93 57K 8,46 8,555 8,369 8,46 6,30 6,863 6,08 6,603 6,407 6,478 6,337 6,407 4,77 5,94 4,700 4, K ,86 7,903 7,73 7,86 5,755 6,345 5,734 6,099 57K 8,0 8,9 8,0 8,0 6,038 6,65 6,06 6, ,03 6,7 6,34 6,03 4,566 5,08 4,550 4,839 40K ,567 7,650 7,484 7,567 5,57 6,43 5,55 5,904 57K 7,939 8,06 7,85 7,939 5,845 6,438 5,84 6,94 5,86 5,96 5,797 5,86 4,35 4,75 4,300 4,573 40K ,5 7,30 7,073 7,5 5,65 5,805 5,46 5,580 57K 7,503 7,585 7,40 7,503 5,54 6,085 5,504 5,854 5,5 5,58 5,460 5,5 4,065 4,475 4,050 4, K ,735 6,80 6,66 6,735 4,959 5,468 4,94 5,55 57K 7,066 7,44 6,989 7,066 5,03 5,73 5,84 5,54 5,80 5,37 5,3 5,80 3,84 4,99 3,800 4,04 3* 40K ,39 6,389 6,50 6,39 4,653 5,30 4,636 4,93 57K 6,630 6,703 6,557 6,630 4,88 5,377 4,864 5,73 4,567 4,67 4,56 4,567 3,36 3,70 3,350 3,563 * 40K ,57 5,633 5,50 5,57 4,0 4,53 4,087 4,347 57K 5,845 5,909 5,78 5,845 4,303 4,740 4,88 4,56 4,58 4,04 4, 4,58 3,06 3,370 3,050 3,44 * 40K ,07 5,8 5,07 5,07 3,734 4,8 3,7 3,958 57K 5,3 5,380 5,63 5,3 3,98 4,36 3,904 4,5 * Not available with N option Electrical and lumen data at 5 C (77 F). Actual wattage and lumen output may differ by +/-0% when operating between 0-480V +/-0% 07 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. Content is subject to change. Patent Cree, NanoOptic, and Colorfast DeltaGuard are registered trademarks, and the Cree logo, Precision Delivery Grid and XSP are trademarks of Cree, Inc. The UL logo is a registered trademark of UL LLC. NEMA is a registered trademark of the National Electrical Manufacturers Association. US: lighting.cree.com T (800) F (6) T (800) F (800)
7 XSP Series XSPW LED Wall Mount Luminaire Product Description The XSPW LED wall mount luminaire has a slim, low profile design intended for outdoor wall mounted applications. The rugged lightweight aluminum housing and mounting box are designed for installation over standard single gang J-Boxes and mud ring single gang J-Boxes. The luminaire allows for through-wired or conduit entry from the top, bottom, sides and rear. The housing design is intended specifically for LED technology including a weathertight LED driver compartment and thermal management. Optic design features industry-leading NanoOptic Precision Delivery Grid system in multiple distributions. Applications: General area and security lighting formance Summary NanoOptic Precision Delivery Grid optic 9.3" (36mm) Assembled in the U.S.A. of U.S. and imported parts CRI: Minimum 70 CRI CCT : 3000K (+/- 300K); 4000K (+/- 300K); 5700K (+/- 500K) Limited Warranty : 0 years on luminaire/0 years on Colorfast DeltaGuard finish See for warranty terms " (305mm) Accessories Field-Installed Beauty Plate WM-PLT** - " (305mm) Square WM-PLT4** - 4" (356mm) Square - Covers holes left by incumbent wall packs ** Must specify color 4.8" (mm) 3.8" (97mm) Multi-Level Sensor location (ordered as an option) Weight 9.5 lbs. (4.3kg) Ordering Information Example: XSPW-A-0F-C-U-Z XSPW A 0 Product Version Mounting Optic Modules Voltage Color Options Options XSPW A 0 Wall Type II Medium 3 Type III Medium 3000K F 4000K M 5700K C 4W G 5W U Universal 0-77V 0V 08-77V 6* 347V S Silver T Black W White Z Bronze K P Multi-Level Refer to ML spec sheet for details Available with C only Available with U and 6 voltages only Photocell Not available with K option Available with or voltages only * Available in Canada only. 347V utilizes magnetic step-down transformer. For input power for 347V, refer to the Electrical Data table Rev. Date: VersionA V9 0/05/07 US: lighting.cree.com T (800) F (6) Canada: T (800) F (800)
8 XSPW LED Wall Mount Luminaire Product Specifications CONSTRUCTION & MATERIALS Slim, low profile design Luminaire housing specifically designed for LED applications with advanced LED thermal management and driver Luminaire mounting box designed for installation over standard single gang J-Boxes and mud ring single gang J-Boxes Luminaire can also be direct mounted to a wall and surface wired Secures to wall with four 3/6" (5mm) screws (by others) Conduit entry from top, bottom, sides, and rear Designed and UL approved for easy through-wiring Designed for downlight applications only Exclusive Colorfast DeltaGuard finish features an E-coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Silver, black, white and bronze are available Weight: 9.5lbs. (4.3kg) ELECTRICAL SYSTEM Voltage: 0-77V or 347V, 50/60Hz Factor: > 0.9 at full load Total Harmonic Distortion: < 0% at full load Class driver Integral 0kV surge suppression protection standard When code dictates fusing, a slow blow fuse or type C/D breaker should be used to address inrush current C is designed with 0-0V dimming capabilities standard. Controls by others 0V Source Current: 0.5 ma REGULATORY & VOLUNTARY QUALIFICATIONS culus Listed Suitable for wet locations Enclosure rated IP66 per IEC 6059 DLC qualified when ordered with 40K or 57K. Please refer to for most current information 0kV surge suppression protection tested in accordance with IEEE/ANSI C6.4. Meets FCC Part 5, Subpart B, Class A standards for conducted and radiated emissions Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 7 Meets Buy American requirements within ARRA RoHS compliant. Consult factory for additional details Electrical Data* System Watts 0-77V System Watts 347V Total Current (A) 0V 08V 40V 77V 347V C G * Electrical data at 5 C (77 F). Actual wattage may differ by +/- 0% when operating between 0-347V +/- 0% XSPW Series Ambient Adjusted Lumen Maintenance Ambient 5 C (4 F) 0 C (50 F) 5 C (59 F) 0 C (68 F) 5 C (77 F) C G C G C G C G C G 5K hr Projected 50K hr Projected 75K hr Projected K hr Calculated 3 Lumen maintenance values at 5 C (77 F) are calculated per TM- based on LM-80 data and in-situ luminaire testing. Luminaire ambient temperature factors (LATF) have been applied to all lumen maintenance factors In accordance with IESNA TM, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) 3 In accordance with IESNA TM, Calculated Values represent time durations that exceed six times (6X) the IESNA LM total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) US: lighting.cree.com T (800) F (6) Canada: T (800) F (800)
9 XSPW LED Wall Mount Luminaire Photometry All published luminaire photometric testing performed to IESNA LM standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: Type II Medium Distribution 3000K/4000K 5700K C 3,89 B U0 G 4,09 B U0 G 30 horizontal angle CESTL Test Report #: XSPW-A-*F-G-U-S Lumens:,739 XSPW-A-*F-C-U-S Mounting Height: (3.) A.F.G. Lumens: 3,89 FC at grade G,59 B U0 G,7 B U0 G * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: XSPW-A-*F-G-U-S Mounting Height: (3.) A.F.G. Lumens:,59 FC at grade Type III Medium Distribution 3000K/4000K 5700K C 3,89 B U0 G 4,09 B U0 G 30 horizontal angle CESTL Test Report #: XSPW-A-*-3-F-C-U-S Lumens: 4,87 XSPW-A-*-3-F-C-U-S Mounting Height: (3.) A.F.G. Lumens: 3,89 FC at grade G,59 B U0 G,7 B U0 G * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: horizontal angle CESTL Test Report #: XSPW-A-*-3-F-G-U-S Lumens:,69 XSPW-A-*-3-F-G-U-S Mounting Height: (3.) A.F.G. Lumens:,59 FC at grade 07 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. Content is subject to change. Patent Cree, NanoOptic, and Colorfast DeltaGuard are registered trademarks, and the Cree logo, XSPW and Precision Delivery Grid are trademarks of Cree, Inc. The UL logo is a registered trademark of UL LLC. The DLC QPL logo is a registered trademark of Northeast Energy Efficiency Partnerships, Inc. US: lighting.cree.com T (800) F (6) Canada: T (800) F (800)
10 Beta Lantern Project: Type: Qty: _ Series Optics Reflector Mounting Lamping Finish Voltage Options _ Pole Series Height Finish Pole Options Series Optics Reflector Mounting Lamping Finish Voltage Options BLC Beta Lantern L S Flat Glass Lens Sagged Glass Lens R R3 R5 Type II Aluminum Reflector Type III Aluminum Reflector Type V Aluminum Reflector Single Double W Wall Mount Metal Halide H050 50w H070 70w H00 00w H50 50w HPS S050 50w S070 70w S00 00w S50 50w WH White BK Black BZ Bronze SV Silver SP Specify Premium Color Not available for 347V Only for 55v lamp HS House Side Shield QR Quartz Restrike (40w Max) FS Single Fusing PCT Photocell Tenon BLC - S /4" (54m) 36 /4" (9m) 3 /" O.D. (9m) BLC-L 6. Shielding - Specify tempered flat glass lens (L), or tempered sagged glass lens (S). Lenses are secured using a captive ring and are easily removable for access to lamp (no special tools required). Version with tempered Glass Lens (BLC-L) is IDA- Approved TM dark sky friendly. 7. Pole Fitter - Cast aluminum fitter secures to pole with 3 stainless steel Allen head set screws. For 3 / (9m) pole tenon. 8. Socket - 4KV Pulse rated porcelain medium base socket pre-wired to ballast at factory. 9. Ballast - (Not shown) A high efficiency, pulse start, core and coil ballast regulates voltage for H.I.D. lamp. Consult factory for detailed ballast information. Selux utilizes a high quality Polyester Powder Coating. All Selux luminaires and poles are finished in our Tiger Drylac certified facility and undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention. All products are tested in accordance with test specifications for coatings from ASTM and PCI. Standard exterior colors are White (WH), Black (BK), Bronze (BZ), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide. Hot Dip Galvanized finish (GV) on all steel parts also available.. Fixture Cap - Decorative aluminum fixture cap removable for ballast access.. Gasketing - Continuous molded gaskets provide weatherproofing, dust, and insect control. 3. Fixture Hood - Decorative aluminum shade with hinged door for lamp access (no special tools required). 4. Lamp - One clear, ED-7 metal halide or high pressure sodium up to 50w. Horizontal lamp for R and R3 reflectors; base-up vertical lamp for R5 reflector. Lamp provided by others. 5. Reflector - Precision formed aluminum reflector available with a Type II, III, or V distribution. Exterior Luminaire Finish - Selux Corp. 03 TEL (845) FAX (845) BL (ss-v7.0) NRTL Listed (i.e. UL, CSA) Union Made Affiliated with IBEW Local 363 E In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at are the most recent versions and supercede all other printed or electronic versions.
11 Beta Lantern Photometry Closed Version / Tempered Flat Glass Lens / R Reflector / 50w MH Catalog # BLC-L-RH50 Report # SX-9559-A l Precision formed aluminum reflector with specular kick reflectors to precisely control distribution. l Ideal for applications demanding max. spacing. l Maximum candela of 7467 at 7.5 from vertical. l IES classification - Type II Full Cutoff. l IDA-Approved TM dark sky friendly. DOWNLOAD IES FILE: Closed Version / Tempered Flat Glass Lens / R3 Reflector /50w MH Catalog # BLC-L-R3H50 Report # LSI-3535 l Precision formed aluminum reflector with specular kick reflectors to precisely control distribution. l Ideal for applications demanding max. spacing. l Maximum candela of 99 at -.5 from vertical. l IES classification - Type II Full Cutoff. l IDA-Approved TM dark sky friendly. DOWNLOAD IES FILE: Closed Version / Tempered Flat Glass Lens / R5 Reflector / 50w MH Catalog # BLC-L-R5H50 Report # LSI-3593 l Precision formed aluminum reflector with vertical, base-up lamp. l Ideal for applications demanding a uniform symmetric light distribution. l Maximum candela of 464 at.5 and -.5 from vertical. l IES classification - Type V Full Cutoff. l IDA-Approved TM dark sky friendly. DOWNLOAD IES FILE: HID Lamp Prorate Table (ED-7 Clear, Medium-Base Lamp) High Pressure Sodium Metal Halide Wattage Factor Lumens Wattage Factor Lumens Conversion Chart Values based on ' mounting height. Mounting Height 8' ' 4' 6' Multiply Selux Corp. 03 BL (ss-v7.0) In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at are the most recent versions and supercede all other printed or electronic versions.
12 Beta Lantern Mounting Single Die-cast aluminum fitter base secured to pole with three, stainless steel, Allen head set screws. Double Die-cast aluminum double luminaire mounting arm for pole mounted fixtures. Secured to pole with (4) stainless steel Allen head bolts. Wall Die-cast aluminum wall mount arm. Secured to wall with /4" diameter threaded fasteners (by others). /4" (54m) 60 5 /8" (54m) 8 /" (75mm) 40 /" (09mm) 39 3 /8" (00m) 7 5 /6" (455mm) 3 /" (9m) Pole Height ( ft shown) Wall Arm Mounting Detail (Conduits and mounting hardware by others.) 3 5 /6" (0m) 5 /" (4m) 6 /6" (7m) 3 /4" (7m) Selux Corp. 03 BL (ss-v7.0) In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at are the most recent versions and supercede all other printed or electronic versions.
13 Beta Lantern Pole Information Refer to A35, S635, or S35 Pole specification sheets for construction details, anchorage information and additional options. A35 & S35 Round Straight Aluminum & Round Straight Steel Poles S635 Round Stepped Steel Pole Overall Height (8' shown) 44" (8mm) : 4 Scale 4" (6m) 4" (6m) Shown with standard base covers. Base Cover Information Refer to A35, S635, or S35 Pole specification sheets for construction details, anchorage information and additional options. Straight Poles (A35 & S35) BC5 Standard Base Cover Two-piece cast aluminum Stepped Steel Pole (S635) BC6 Standard Base Cover One-piece cast aluminum BC Optional Base Cover (A35 & S35) One-piece cast aluminum 3 /" (89mm) 3 /" (89mm) 5 /4" (34mm) 6 5 /8" (68mm) 4 5 /8" (8mm) 5 /8" (55m) Ø 7 /6" (36mm) Ø5 3 /4" (40m) Ø 5 /8" (3m) Selux Corp. 03 BL (ss-v7.0) In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at are the most recent versions and supercede all other printed or electronic versions.
14 Beta Lantern Pole Data Chart Pole Series Bolt Circle 70 mph EPA Information (ft ) 80 mph 90 mph 00 mph 0 mph Height Finish Options S635 A35 S35 S635 A35 S35 3 /" Diameter Stepped Steel Pole 3 /" Diameter Straight Aluminum Pole 3 /" Diameter Straight Steel Pole 3 /" Diameter Stepped Steel Pole 3 /" Diameter Straight Aluminum Pole 3 /" Diameter Straight Steel Pole Ø9" Ø9" ft. 0 0 ft. WH White BK Black BZ Bronze SV Silver SP Specify Premium Color BC REC Decorative Cast Aluminum Base Cover (for A35 & S35 poles only) GFCI Receptacle with weatherproof cover S635 A35 3 /" Diameter Stepped Steel Pole 3 /" Diameter Straight Aluminum Pole Ø9" ft. For Photocell Tenon option, see p. S35 3 /" Diameter Straight Steel Pole S635 3 /" Diameter Stepped Steel Pole A35 3 /" Diameter Straight Aluminum Pole S35 3 /" Diameter Straight Steel Pole Ø9" ft. Weatherproof cover intended for portable tools or other portable equipment connected to the outlet only when attended. For other requirements please consult factory. S635 3 /" Diameter Stepped Steel Pole Ø9" A35 3 /" Diameter Straight Aluminum Pole ft. S35 3 /" Diameter Straight Steel Pole Other pole configurations available, consult factory. Effective Projected Area of Single Luminaire = 0.9 ft (0.09m ) / Weight of Luminaire = 35.0 lbs (5.9kg) Effective Projected Area of Double Luminaire =.37 ft (0.m ) / Weight of Double Luminaire (includes arms) = 94.0 lbs (4.6kg) Optional Accessories Photo Cell Tenon (PCT) - Button type photocell mounted in cast aluminum pole top tenon. Tenon has integral cast visor to prevent false start/stop cycle and can be oriented for optimum performance. Refer to fixture spec sheet to determine if this option is applicable. GFCI Receptacle (REC) - GFCI duplex receptacle with cast base bolted to pole and gasketed, provided with weather-proof, self-closing cover; located 36" (95mm) from base of pole, inline with handhole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel. 3 /8" (34mm) 3 /6" (7mm) 3 /6" (mm) /" (3mm) 4 5 /8" (7mm) Selux Corp. 03 BL (ss-v7.0) In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at are the most recent versions and supercede all other printed or electronic versions.
15 CPY Series - Version A CPY50 LED Canopy/Soffit Luminaire Product Description The CPY50 LED Canopy/Soffit Luminaire has an extremely thin profile constructed of rugged cast aluminum. It can be surface mounted easily from below the canopy deck and can be pendant mounted. Direct imaging of the LEDs is eliminated with a highly efficient patterned flat or 0.9" (3mm) drop glass lens. Applications: Petroleum canopies, CNG fueling stations, soffits DM Mount formance Summary Made in the U.S.A. of U.S. and imported parts Flat Lens Lumens: Up to 7,470 Efficacy: Up to 5 LPW CRI: Minimum 70 CRI CCT : 4000K (+/- 300K), 5700K (+/- 500K) Standard Limited Warranty : 0 years on luminaire/0 years on Colorfast DeltaGuard finish IP66 Rated (Direct Mount only) Drop Lens Class I, Division Hazardous Location for select models See for warranty terms Accessories Field-Installed Direct Mount Luminaires Canopy Upgrade Kits (8 ga. steel) XA-BXCCMW for use with Jet-Philips,.60" (549mm) square XA-BXCCNW for use with Elsco Franciscan,.06" (56m) square XA-BXCCPW for use with LSI Dakota or Masters,.50" (57mm) square XA-BXCCQW for use with Whiteway Riviera or Rig-A-Lite, 0.60" (53mm) square XA-BXCCRW for use with Elsco Merrit, 8.06" (459mm) square XA-BXCCSW for use with LSI Richmond or Whiteway Civic, 0" (584mm) L x 0" (33m) W Direct Mount Junction Box/Stem Kit XA-BXCCJBOX 6.0" (5mm) H x 3/4" (9mm) NPT Stem - Watertight - Rated for feed through 8 (4 in, 4 out) # AWC conductors Direct Mount Beauty Plates XA-BXCCBPW 7" (665mm) Beauty Plate Only (8 ga. steel) XA-BXCCBPBW 7" (665mm) Beauty Plate (8 ga. steel) w/" (305mm) Backer Plate (6 ga. steel) - For use in canopies where deck opening is larger than what is required for mounting the CPY50 luminaire. Maximum deck opening 0.75" x 5" (83mm x 375mm) XA-BXCCBPB6W 7" (665mm) Beauty Plate (8 ga. steel) w/6" (406mm) Backer Plate (6 ga. steel) - For use in canopies where deck opening is larger than what is required for mounting the CPY50 luminaire. Maximum deck opening " x 5" (305mm x 375mm) * Must specify color Ordering Information Example: CPY50-A-DM-D-D-UL-SV Pendant Mount Luminaires Pendant Mount Kits XA-PSKIT* 5" (7mm) pendant XA-PS8KIT* " (79mm) pendant XA-PSKIT* 5" (38mm) pendant - Includes two conduit fittings and 3/4-4 NPT pipe threaded on two ends Hand-Held Remote XA-SENSREM - For successful implementation of the programmable multi-level option, a minimum of one hand-held remote is required 0.9" (3mm) Drop Lens Gasket to Seal up to 4.5" (08mm) Canopy Cutout Mounts with (4) Supplied Self-Sealing Sheet Metal Screws Weight 7." (83mm).5 lbs. (5.7kg).0" (5m) Flat Glass Lens.0" (79mm) 3/4" (9mm) NPT Conduit Entry 5.0" (38mm) CPY50 A Product Version Mounting Optic Voltage Color Options Options CPY50 A DM Direct PD Pendant D 0.9" (3mm) Drop Lens F Flat Lens A 8W D 40W UL Universal 0-77V UH Universal V BK Black BZ Bronze SV Silver WH White DIM 0-0V Dimming Available with D only Control by others Refer to Dimming spec sheet for details Can't exceed wattage of specified HZ Class I, Div. Hazardous Location Certification Not available with DIM or PML options PML Programmable Multi-Level Available with D only Available with UL voltage only Refer to PML spec sheet for details 40K 4000K Color Temperature Minimum 70 CRI Color temperature per luminaire Rev. Date: V0 //07 US: lighting.cree.com T (800) F (6) Canada: T (800) F (800)
16 CPY50 LED Canopy/Soffit Luminaire - Version A Product Specifications CONSTRUCTION & MATERIALS Slim, low profile design Easy mounting and servicing from below the deck Luminaire housing is constructed of rugged cast aluminum with integral heat sink specifically designed for LED Flat lens is 0.5" tempered Solite glass Drop lens is 0.57" molded borosilicate glass Direct mount is suitable for use in single or double skin canopies with a minimum 4.0" (0mm) wide panels and a minimum gauge, 0.030" (0.7mm) canopy thickness Direct mount luminaire mounts directly to the canopy deck with the drilling of a single " to 4" (5mm to 0mm) round hole, is secured in place with self-sealing screws that provide a weathertight seal and includes 3/4 (9mm) conduit entry for direct wire feed Standard pendant mount includes a mounting bracket and a J-Box for customer wiring and is intended to be mounted by 3/4 IP pendant (by others) Hazardous location pendant mount has a threaded hub which accepts 3/4" NPT conduit (by others) and secures with a /4"-0 set screw Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Black, bronze, silver and white are available Weight:.5 lbs. (5.7kg) ELECTRICAL SYSTEM Voltage: 0-77V or V, 50/60Hz, Class drivers Factor: > 0.9 at full load Total Harmonic Distortion: < 0% at full load Integral 6kV surge suppression protection standard To address inrush current, slow blow fuse or type C/D breaker should be used 0V Source Current: 0.5mA Operating Temperature Range: Applications Requiring Class I, Division Hazardous Location Ratings: -40 C - +5 C; A :-40 C C (direct mount to plywood), -40 C C (direct mount to sheet metal/suspended); D s: -40 C C (sheet metal/suspended only) WARNING: Exceeding maximum operating temperature may result in thermal foldback REGULATORY & VOLUNTARY QUALIFICATIONS culus Listed Suitable for wet locations when ordered with DM mount Suitable for damp locations when ordered with PD mount Suitable for wet locations when ordered with PD mount and HZ option Enclosure rated IP66 per IEC 6059 when ordered with DM mount Consult factory for CE Certified products 6kV surge suppression protection tested in accordance with IEEE/ANSI C6.4. Meets FCC Part 5, Subpart B, Class A standards for conducted and radiated emissions DLC and DLC Premium qualified versions available. Please refer to for most current information Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 7 Meets Buy American requirements within ARRA RoHS compliant. Consult factory for additional details Class I, Division Hazardous Location rated when ordered with the HZ option. Not available with DIM or PML options. Consult factory for additional details Electrical Data* System Watts 0-77V System Watts V Total Current (A) 0V 08V 40V 77V 347V 480V A D * Electrical data at 5 C (77 F). Actual wattage may differ by +/- 0% when operating between 0-480V +/- 0% Recommended CPY Series - Version A Lumen Maintenance Factors () Ambient 5 C (4 F) 0 C (50 F) 5 C (59 F) 0 C (68 F) 5 C (77 F) 30 C (86 F) 5K hr Projected 50K hr Projected 75K hr Projected A D A D A D A D A D A D K hr Projected Lumen maintenance values at 5 C (77 F) are calculated per TM- based on LM-80 data and in-situ luminaire testing on sheet metal In accordance with IESNA TM, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) 3 In accordance with IESNA TM, Calculated Values represent time durations that exceed six times (6X) the IESNA LM total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) US: lighting.cree.com T (800) F (6) Canada: T (800) F (800)
17 CPY50 LED Canopy/Soffit Luminaire - Version A Photometry All published luminaire photometric testing performed to IESNA LM standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: DROP LENS horizontal angle Drop Lens Distribution 4000K 5700K A 7,600 B3 U G 8,000 B3 U G D 6,403 B4 U3 G 7,059 B4 U3 G CESTL Test Report #: 03-0 CPY50-A-**-D-A-UL Lumens: 8,356 CPY50-A-**-D-D-UL Mounting Height: 5' (4.6m) Lumens: 7,059 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: FLAT LENS Flat Lens Distribution horizontal angle K 5700K A 7,600 B3 U0 G 8,000 B3 U0 G D 6,798 B4 U0 G 7,470 B4 U0 G ITL Test Report #: CPY50-A-**-F-A-UL Lumens: 8,8 CPY50-A-**-F-D-UL Mounting Height: 5' (4.6m) Lumens: 7,470 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: PD Mount PD Mount w/hz Option 5.0" (38mm) 5.0" (38mm) 5.0" (383mm) Pendant not included 5.9" (49mm) 8.0" (03mm) Set-Screw 5.0" (38mm) Threaded Hub 3/4" NPT Conduit Supplied By Others Flat Glass Lens " (75.5mm).0" (5m) 07 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. Content is subject to change. Patent Cree, Colorfast DeltaGuard and CPY50 are registered trademarks and the Cree logo is a trademark of Cree, Inc. The UL logo is a registered trademark of UL LLC. The DLC QPL logo and the DLC QPL Premium logo are registered trademarks of Northeast Energy Efficiency Partnerships, Inc. US: lighting.cree.com T (800) F (6) Canada: T (800) F (800)
XSP Series XSP2 LED Street/Area Luminaire Double Module Version C
XSP Series XSP LED Street/Area Luminaire Double Module Version C Product Description Designed from the ground up as a totally optimized LED street and area lighting system, the XSP Series delivers incredible
More informationXSP Series XSP1 LED Street/Area Luminaire Single Module Version C
XSP Series XSP LED Street/Area Luminaire Single Module Version C Product Description Designed from the ground up as a totally optimized LED street and area lighting system, the XSP Series delivers incredible
More informationXSP Series XSP1 LED Street/Area Light Single Module Version B
XSP Series XSP LED Street/Area Light Single Module Version B Product Description Designed from the ground up as a totally optimized LED street and area lighting system, the XSP Series delivers incredible
More informationXSP Series XSP2 LED Street/Area Luminaire Double Module Version B
XSP Series XSP LED Street/Area Luminaire Double Module Version B Product Description Designed from the ground up as a totally optimized LED street and area lighting system, the XSP Series delivers incredible
More informationXSP High Output Series XSP1 High Output LED Street/Area Luminaire Single Module
XSP High Output Series Product Description Designed from the ground up as a totally optimized LED street and area lighting system, the XSP High Output Series delivers incredible efficiency without sacrificing
More informationOSQ Series OSQ LED Area/Flood Luminaire Medium
OSQ Series OSQ LED Area/Flood Luminaire Medium Product Description DA Mount The OSQ Area/Flood luminaire blends extreme optical control, advanced thermal management and modern, clean aesthetics. Built
More informationOSQ Series OSQ LED Area/Flood Luminaire Large
10.6" (7m) OSQ Series OSQ LED Area/Flood Luminaire Large Product Description The OSQ Area/Flood luminaire blends extreme optical control, advanced thermal management and modern, clean aesthetics. Built
More informationOSQ Series OSQ LED Area/Flood Luminaire Medium
OSQ Series OSQ LED Area/Flood Luminaire Medium Product Description The OSQ Area/Flood luminaire blends extreme optical control, advanced thermal management and modern, clean aesthetics. Built to last,
More informationXSP Series XSPR LED Street/Area Luminaire Version A
XSP Series XSPR LED Street/Area Luminaire Version A Product Description In addition to a low initial cost, the XSPR LED Street luminaire maintains the familiar look of the traditional cobrahead design
More informationXSP Series XSPR LED Street/Area Luminaire Version A
XSP Series XSPR LED Street/Area Luminaire Version A Product Description In addition to a low initial cost, the XSPR LED Street luminaire maintains the familiar look of the traditional cobrahead design
More informationPKG-304-5M-DM. 304 Series Parking Structure Luminaire Type V Medium Direct Mount. Product Description. Performance Summary
PKG-304-5M-DM 304 Series Parking Structure Luminaire Type V Medium Direct Mount Product Description Slim, low profile design. Lumianire is constructed from rugged die cast and extruded aluminum components.
More informationLIGHTING EQUIPMENT & LED LAMP WATTAGES. Pre-(billing) 250 or 400W Sodium Cobra Head 300 or 465 W Cree RSWM-A-HT-3ME-9L-30K7-UL-GY-N 83 W
List of equipment/material provided in this efficiency upgrade: Street Lighting LIGHTING EQUIPMENT & LED LAMP WATTAGES Contract Quantities Existing Equipment Pre-(billing) Wattage* New Equipment Proposed
More informationLight Engine. Tilt of. Mounting. Pole Series K. R3W Type III Distribution Wide R3N Type III Distribution Narrow R5 Type V Distribution
Project: AV6 Series Type: Mounting Options Tilt of Mounting Light Series Optics CCT Qty: Power Length (ft.) Height Finish Options Finish Voltage T30 Tilt of Series Mounting Light Power Mounting Optics
More informationCree Edge Street. Mounting 3 for 60mm outside diameter poles/tenon. Product Description. Performance Summary. Accessories
Cree Edge Street Mounting 3 for 60mm outside diameter poles/tenon Product Description Slim, low profile design minimizes wind load requirements. Luminaire sides are rugged cast aluminum with integral,
More informationArca LED 5YEAR LED WARRANTY. Order Code: Pole Order Code: Customer: Date: Project: Qty: Type: ACL ACL. R2 Type II Distribution.
Date: Customer: Project: Type: Qty: Arca LED Order Code: Pole Order Code: ACL - R2 - - - - - - - - - HC - - - - - - - - - Series Height Finish Helicoil Options *Helicoil Locations Pair * Refer to chart
More informationLight Engine 6TL TL mA/60w 500mA/87w
Arc LED Project: Type: Qty: Series Optics Mounting Light Engine CCT Finish Voltage ARCL Arc LED R1 Type I R2 Type II R3 Type III R4 Type IV R5 Type V ARCL Series Series Toltec Arm Series: S1 Single 29"
More informationHeight Finish Option L26 L50 26W 50W 26 3 /16" (665mm)
Quadro LED Series QDL Quadro LED Optics Mounting Light Engine CCT Finish Voltage Options TS Tritec Symmetric TA Tritec Asymmetric Project: Type: QDL Pole Series Single Double W Wall WH White BK Black BZ
More informationQty: AST 2. R5 Type V Distribution. W Wall Mount. LG ma/102w K. SV Silver. SP Specify Premium Color. DM 6,7 Dimming (0-10V)
Date: Customer: Project: Type: Qty: Astro & AST AST Order Code: - - - - - - - - Series AST Astro Pole Order Code: - - - Series Height Finish Options AST Astro Optics R Type I Distribution R Type II Distribution
More informationLEDway Road. Cree Ledway LED Street Light - Adjustable Arm Mount. Product Description. Performance Summary. Accessories
LEDway Road Cree Ledway LED Street Light - djustable rm Mount Product Description Luminaire housing is all aluminum construction. ll components are mercury free and recyclable. Sharp profile for low wind
More informationOSQ SERIES LED SPECIFICATION-GRADE AREA LUMINAIRE. Ready to turn your lighting poles into money trees.
OSQ SERIES LED SPECIFICATION-GRADE AREA LUMINAIRE Ready to turn your lighting poles into money trees. OSQ Series LED Area Luminaire / Benefits OSQ Series LED Area Luminaire / Benefits OSQ Series LED Area
More informationCree Square LED Series
Cree Square LED Series MINI Product Description Conceived with an essential design, this luminaire has a simple square shape which practically integrates in all environments; also its square profile with
More informationHalco AL-Series Area Light
Catalog Number: Type: Project: Comments: Date: YR WARRANTY The Halco AL-Series is one of the most innovative area lighting solutions on the market today. While maintaining a slim, aesthetic design, the
More informationMTR Column LED 5YEAR LED WARRANTY. Order Code: Customer: Date: Project: Qty: Type: MTRTL Tapered Pole. MTRCL Round 8 Straight Pole MTRTL MTRCL 10 12
Date: Customer: Project: Type: Qty: MTR Column LED Order Code: - - - - - - - - Series MTRTL Tapered Pole MTRCL Round 8 Straight Pole Nominal Overall Ht. MTRTL MTRCL 0 0 6 6 6 6 Nominal Ht. of Lit Section
More informationLight Engine. Mounting. Pole Series. Distribution. Wide R3N Type III. Distribution. Narrow R5 Type V. With internal step- down transfomer.
Project: AV6 Series Type: Mounting Options Tilt of Mounting Light Engine Series Optics CCT Qty: Power Length (ft.) Height Finish Options Finish Voltage T30 Tilt of Series Mounting Light Engine Power Mounting
More informationLight Engine. Mounting. Pole Series. R3W Type III Distribution Wide R3N Type III Distribution Narrow R K K. Type V Distribution
Tilt of Series Mounting Light Engine Power Mounting Optics CCT Length (ft.) Finish Voltage AV4 Avanza 450 SA 6 Single Adapter S1 Single Short Arm S2 Double Short Arm @180 Single Long Arm L2 Double Long
More informationProject: Catalog No.: CALCULATED LIFETIME. Fixture Type: 100,000 HOURS. Notes:
AL SERIES AREA LIGHT Finish Color Dark Bronze White AL Series LED Area Light luminaries provide substantial energy savings through efficient delivery of light into all areas of parking lots or other large
More informationNominal. Mounting. Length foot foot RUN Nominal Lengths* Suspension Bracket 1 Studs (Factory installed) Rotating Crossbar
M125 Project: Type: Qty: Series Lamping Mounting Nominal Length Finish Voltage Options Series M125R1 Flanged M125R2 Flanged / Flush Endcaps M125 For Concrete Pour Only Lamping 1T5 2T5 1T8 2T8 1T5HO 2T5HO
More informationNominal Height of Lit Section. Nominal Overall Height. Nominal Height Light Engine CCT Finish Voltage Options CCT
Corral Column LED Project: Type: Qty: Series ominal Overall Height ominal Height of Lit Section CCT Finish Voltage Options Series ominal Overall Height ominal Height of Lit Section CCT Finish Voltage Options
More informationGE Evolve LED L-Series Wall Pack EWLS
The Evolve,, is a designed replacement for 50W to 250W HID, while offering significant energy savings in a long-life LED wall pack. The 's 2-screw housing design enables a fast and simplified installation.
More informationLFS - SAL LED Small Area Light
Description The LFS-SAL small area light is the first of its kind in Lumecon s LED Fire Series. Combining a sleek fixture design with energy efficient performance allows this fixture to be used in parking
More informationLFS - SAL LED Small Area Light
FIRE SERIES Description The LFS-SAL small area light is the first of its kind in Lumecon s LED Fire Series. Combining a sleek fixture design with energy efficient performance allows this fixture to be
More informationLFS - LAL LED Large Area Light
Description The LFS-LAL large area light is the first of its kind in Lumecon s LED Fire Series. Combining a sleek fixture design with energy efficient performance allows this fixture to be used in parking
More informationLFS - SFL LED Small Flood
Technical Specifications Description The LFS-SFL small flood light is the first of its kind in Lumecon s LED Fire Series. Combining a sleek fixture design with energy efficient performance allows this
More information* Optional TLPC shown. Mounting for Square Pole ORDERING INFORMATION 72W 108W 141W 188W 108LED 141LED 188LED. DM 0-10V Dimming. (Std.
Revised: 11.1.16 LED AREA / PARKING / STREET LIGHT LAP-G APPLICATION For all applications in site, area, and general lighting requiring high uniformity, excellent vertical light distribution, reduced offsite
More information24" KittyHawk LED Area Light, Heritage Series
Project Name Fixture Type Catalog # 24" KittyHawk LED Area Light, Heritage Series Advanced light engine technology in a traditional housing design. Wisconsin engineering and craftsmanship utilizing premium
More information24" KittyHawk LED Area Light, Heritage Series
Project Name Fixture Type Catalog # 24" KittyHawk LED Area Light, Heritage Series Advanced light engine technology in a traditional housing design. Wisconsin engineering and craftsmanship utilizing premium
More informationTHE ARIA. LED AREA LIGHT. eran industrial. ARL SERIES
AREA LIGHT eran industrial. ARL SERIES AREA LIGHTS THE SUPERIOR ARL SERIES ARL 460 120W 100W 65W ARL 480 250W 200W 150W ARL 460 380W 300W WE CONTINUE TO BRING ADVANCED TECHNOLOGY TO THE LIGHTING INDUSTRY.
More informationEvolve LED Area Lighting. Canopy Light (ECB)
Evolve LED Area Lighting Canopy Light (ECB) Product Features The GE Evolve LED Canopy Light family provides an energy-efficient and robust means for lighting areas with canopies, such as gas stations,
More informationLFS - SAL LED Small Area Light
Description The LFS-SAL small area light is the first of its kind in Lumecon s LED Fire Series. Combining a sleek fixture design with energy efficient performance allows this fixture to be used in parking
More informationLFS - SAL LED Small Wall Pack
Description The LFS-SAL small wall pack light is the first of its kind in Lumecon s LED Fire Series. Combining a sleek fixture design with energy efficient performance allows this fixture to be used in
More informationLENDA. BBE LED Roadway Lighting Luminaire LENDA TM series V1: LDA-15/01/17. Performance Data:
V1: LDA-15/01/17 BBE LED Roadway Lighting Luminaire LENDA TM series LENDA Performance Data: Input Voltage: 220-240Vac / 120-277Vac 50/60Hz Wattage: 28-215W LED efficiency: >130lm/W @ 700mA Luminaire: >110lm/W
More informationLFS - LAL LED Large Wall Pack
Description The LFS-LAL large wall pack is the first of its kind in Lumecon s LED Fire Series. Combining a sleek fixture design with energy efficient performance allows this fixture to be used in parking
More informationSuitable for applications requiring 3G testing prescribed by
PRODUCT IMAGE(S) SPECIFICATIONS Construction: Stylish vertically finned die-cast solid top housing for maximum heat dissipation; Stops collection of unsightly debris Rugged lower die-cast aluminum heat
More informationAutobahn Series ATBM Roadway
PRODUCT OVERVIEW Features: Autobahn Series ATBM OPTICAL Same Light: Performance is comparable to 150W 250W HPS ODOT ITB 180-17 Group 7 Item 44 Qty. 1 White Light: Correlated color temperature - standard
More information12" LED RoundBack Adjustable Flood Light, Heritage Series
Project Name Fixture Type Catalog # 12" LED RoundBack Adjustable Flood Light, Heritage Series Advanced light engine technology in a traditional housing design. Wisconsin engineering and craftsmanship utilizing
More informationCape Girardeau, MO 43W / 65W / 83W 131W / 165W. StreetSense LED Street Light for roadway and area illumination 190W / 252W.
Cape Girardeau, MO 43W / 65W / 83W 131W / 165W 190W / 252W for roadway and area illumination Patent Pending Features and Benefits Patented Optics Precision optics and unique mechanical design delivers
More informationLineal SPECIFICATIONS: LED Luminaire STRUCTURA INC. FIXTURE TYPE: PROJECT NAME:
LED Luminaire FIXTURE TYPE: PROJECT NAME: Lineal mounted on Structura Tilt pole. SPECIFICATIONS: CONSTRUCTION: Seamless aluminum housing comprised of 6005A- T61 extrusion and 6061-T6 end plates. Gasketed
More informationAREA LIGHT GT SERIES FEATURES & BENEFITS TECHNICAL PARAMETERS
AREA LIGHT GT SERIES The Arcadia GT Series Area Lights are high performance parking lot solution with an updated shoe box design. An efficient modular design combined with the right lens type will provide
More informationItem # Part # Wattage Lumens Kelvin Voltage Type Distribution Custom Options Available*
Product Information The LITELUME Area Light Medium Luminaire (LL-ALM) combines style with performance. Featuring a die-cast aluminum housing with outstanding corrosion protection, and secondary UV resistant
More informationSPECIALTY FLOODLIGHTING. ACP Series LED ACP1 & ACP2 LED Floodlighting
SPECIALTY FLOODLIGHTING ACP Series LED ACP1 & ACP2 LED Floodlighting SPECIALTY FLOODLIGHTING The ACP Series LED ACP1LED & ACP2LED The ACP LED is a sustainable solution for floodlighting applications with
More informationUNIVERSAL STREET LIGHT G4. IP64
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL STREET LIGHT G4 www.trulygreensolutions.com
More informationType. Suitable for applications requiring 3G testing prescribed by
CIMARRON LED CLS Cat.# Job Type Approvals SPECIFICATIONS PRODUCT IMAGE(S) Construction: Stylish vertically finned die-cast solid top housing for maximum heat dissipation; Stops collection of unsightly
More informationPremium Area Light 10 C O N T R O LLE D
Page 1 of 6 QuadroMAX Plus is a modular area lighting system capable of replacing traditional metal halide solutions from 150W to 750W. Up to six LED modules can be interlocked to create lumen packages
More informationLED Shoe Box light ORDERING MATRIX: LED SHOE BOX LIGHT:
This slick and modem luminaire ASD Shoebox has been designed to handle Catalog number any environment with a beautiful slim line design. Optional photocell allows Notes for further energy saving. Save
More informationAutobahn Series ATB2 Roadway Lighting
P R O D U C T O V E R V I E W Applications: Roadways Off ramps Residental streets Parking lots DIMENSIONS Features: OPTICAL Same Light: Performance is comparable to 200-400W HPS roadway luminaires. White
More informationPremium Area Light QMP Unique Fixture
Page 1 of 8 QuadroMAX Plus is a modular area lighting fixture capable of replacing traditional metal halide solutions from 150W to 750W. Up to six LED modules can be interlocked to create lumen packages
More informationAutobahn Series ATBM Roadway
PRODUCT OVERVIEW Features: OPTICAL Autobahn Series ATBM Roadway ODOT ITB 180-18 Group 8 Item 50 Qty. 25 Same Light: Performance is comparable to 150W 250W HPS White Light: Correlated color temperature
More informationTellus 22 LED Area Light
Catalog # : Project : Prepared By : Date : Tellus LED Area Light The Tellus Area Light provides the best solution with the highest return on investment when replacing existing HID area lighting fixtures.
More informationPremium Area Light QMP Unique Fixture
Page 1 of 6 QuadroMAX Plus is a modular area lighting fixture capable of replacing traditional metal halide solutions from 150W to 750W. Up to six LED modules can be interlocked to create lumen packages
More informationwww.greenelectricalsupply.com t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL STREET
More informationUNIVERSAL LIGHT 27-54W. IP64 WARRANTY
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT 27-4W www.trulygreensolutions.com
More informationUNIVERSAL LIGHT 15-24W. IP64 WARRANTY
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT 15-24W www.trulygreensolutions.com
More informationUNIVERSAL LIGHT G4. IP64
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT G4 www.trulygreensolutions.com
More informationScottsdale Vertex - SCV Pendant Mount LED Luminaire
Catalog # : Project : Prepared By : Date : The Scottsdale Vertex is the most feature-rich canopy fixture in the marketplace. Innovations such as combined optical distributions, multiple lumen packages,
More informationPROJECT: PREPARED BY:
SHOEOX.L PRODUCT Product Information The Shoebox.L is a large, efficient, high-output LED lighting fixture. This LED lighting fixture features die-cast aluminum housing, hinged top frame and bronzed powdercoat
More informationLED UFO HIGH BAY PRODUCT DESCRIPTION SPECIFICATION. Project Name Product Code SKU No. Memo Data
CUSTOMIZATION Project Name Product Code SKU No. Memo Data LED UFO HIGH BAY T CONTROLS IMAGE MAY VARY FROM ACTUAL PRODUCT PRODUCT DESCRIPTION LED UFO High Bay Light is for workshop, warehouse, indoor stadium
More informationArea Light Large. Performance Data. Fixture Information. Lumen Output: Lumens Per Watt (typical): CCT: Distribution: Lifespan: Ratings & Certificates
Description The LITELUME Area Light Large Luminaire (LL-ALL) combines style with performance. Featuring a die-cast aluminum housing with outstanding corrosion protection, and secondary UV resistant polycarbonate
More informationLED FLOODS. Round Back VFloods. Benefits and Features. Accessories (Order as separate line items)
LED FLOODS Round Back VFloods Order Lumen Color Lumen Maint. Calc.L7@ C Fixture Amp. Draw (A) Replaces Existing Model Wattage Code Output Temp. CRI @, hours Amb.(hrs) Color V 77V HID Wattages Number W
More informationFFC SERIES CONTRACTORS
FFC SERIES CONTRACTORS Project: Catalog No.: Fixture Type: Notes: Finish Color Dark Bronze White Save time and effort without the unnecessary work. At we ve made your product selection much simple. When
More informationQuadroMAX LED FIXTURE QM SERIES
PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 8 QuadroMAX LED FIXTURE Mounting Options Slipfitter Fixed Slipfitter Knuckle Pole Mount Fixed Surface Mount Canopy Knuckle Surface Mount
More informationSpecification Data Sheet
Specification Indoor Light : T8T Series Standard Standard Specification Data Sheet T8 Series ( Standard ) Product Picture : T8T-4ft Features 3 Years Warranty Specified Beam Angle CE / UL / DLC / RoHS Certificated
More informationwww.greenelectricalsupply.com t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT
More informationArea Light Small. Performance Data. Fixture Information. Lumen Output: Lumens Per Watt (typical): CCT: Distribution: Lifespan: Ratings & Certificates
Description The LITELUME Area Light Small Luminaire (LL-ALS) combines style with performance. Featuring a die-cast aluminum housing with outstanding corrosion protection, and secondary UV resistant polycarbonate
More informationMirada - XALM Outdoor LED Area Light
Catalog # : Project : Prepared By : Date : Mirada - XALM The Mirada s sleek design makes it perfectly-suited for architectural applications, while its cost-effective die-cast aluminum housing makes its
More informationBBE LED Roadway Lighting Luminaire LSI TM series
V2: LSI-15/01/17 BBE LED Roadway Lighting Luminaire LSI TM series Performance Data: Input Voltage: 220-240Vac / 120-277Vac 50/60Hz Power: 30-250W Luminous flux: 3400-25500lm Up to 118LPW@700mA or 100LPW@1050mA
More informationIndustrial Baymaster HL LED Luminaire High Bay for Ordinary Locations
Applications Powerful, efficient weatherproof lighting for applications such as: Warehouses Waste water treatment facilities Production facilities Processing plants Storage areas Locations requiring, Type
More informationCITY OF BOISE SPECIFICATIONS FOR LIGHT EMITTING DIODE (LED) STREET LIGHTING Effective 1 Feb, 2018
CITY OF BOISE SPECIFICATIONS FOR LIGHT EMITTING DIODE (LED) STREET LIGHTING Effective 1 Feb, 2018 1. LIGHT EMITTING DIODE (LED) LUMINAIRES FOR ROADWAY TYPE 3 ILLUMINATION A. Testing and Compliance I Manufacturer
More informationIndustrial Baymaster LED Luminaire High Bay for Ordinary Locations
Applications Powerful, efficient weatherproof lighting for applications such as: Warehouses Waste water treatment facilities Production facilities Processing plants Storage areas Locations requiring, Type
More informationROADWAY & SECURITY LIGHTING. Autobahn Series ATBS LED Roadway & Security
ROADWAY & SECURITY LIGHTING Autobahn Series ATBS LED Roadway & Security ROADWAY & SECURITY LIGHTING ATBS LED Roadway & Security The ATBS is a true multi-use product. Through the use of Field Adjustable
More informationUNIVERSAL LIGHT DS. IP64 WARRANTY
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT DS www.trulygreensolutions.com
More informationPROJECT: PREPARED BY:
SHOEOX.M All products feature Noribachi s exclusive espoke Engineered and Specifically Tailored (EST) PREPARED Y: Product Information The Shoebox.M is a medium sized, efficient, high-output LED lighting
More informationUNIVERSAL LIGHT DS. IP64 WARRANTY
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT DS www.trulygreensolutions.com
More informationLED Shoe Box light FEATURES AND BENEFITS: ORDERING MATRIX: LED SHOE BOX LIGHT:
ASD slim shoe box lights use up to 8% less energy than metal halide or high pressure sodium lights and put out a much nicer light. Lights up instantly, no warm-up period needed, type III distribution,
More informationPRECISION LED HIGH MAST LIGHTING
THE PRECISION LED HIGH MAST LIGHTING SPEC WITH CONFIDENCE 1 TOLL-FREE: 888-410-5337 FAX: 614-868-5344 2017 SpecGradeLED INTRODUCING THE SpecGrade LED s rugged Navigator is engineered to seamlessly integrate
More informationUNIVERSAL LIGHT 15-24W. IP64
view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT 15- www.trulygreensolutions.com 3 MODELS AVAILABLE IN / / EXPECTED LIFE OVER
More informationTalon LED Architectural Area Luminaire
Talon LED Architectural Area Luminaire INNOVATION CENTER INNOVATION IN ACTION BEST IN CLASS DESIGN + RELIABILITY The Cooper name has stood for innovation, service and expertise for over 175 years. Today,
More informationwww.greenelectricalsupply.com Description The medium trapezoidal cutoff wall pack offers a sleek design and cutoff performance with a wide range of uses. It delivers the lighting needed for the exteriors
More informationEfficacy. Dimming: 0-10V standard dimming capability.
Technical Specifications Description The post-top fixture utilizes our patented thermal integrated trim ring for maximize heat dissipation. Available in multiple wattage and distribution versions, this
More informationInput Voltage: V. Efficacy. Dimming: 0-10V standard dimming capability.
Technical Specifications Description The High Bay luminaire delivers the illumination performance to replace up to a 400W HID fixture one-for-one. Lumecon s unique High Bay design makes this fixture an
More informationVentus LED Architectural Area Luminaire
Ventus LED Architectural Area Luminaire INNOVATION CENTER INNOVATION IN ACTION BEST IN CLASS DESIGN + RELIABILITY The Cooper name has stood for innovation, service and expertise for over 175 years. Today,
More informationIndoor/Outdoor Modular Solution for Commercial Applications. series
Indoor/Outdoor Modular Solution for Commercial Applications a g e V RB series Vega RB SERIES Versatile for mounting on walls or ceilings, the Vega RB series is an excellent choice for tunnels or sloped
More informationROADWAY LIGHTING. Autobahn Series ATB0 & ATB2 LED Roadway
ROADWAY LIGHTING Autobahn Series ATB0 & ATB2 LED Roadway ROADWAY LIGHTING The Autobahn LED ATB0 & ATB2 Quality performance with quick payback. The Autobahn LED uses breakthrough LEDs and precision-engineered
More informationDISCONTINUED. Mirada - XALM Outdoor LED Area Light. Features & Specifications IP66. Product Dimensions
Catalog # : Project : Prepared By : Date : Features & Specifications Optical System State-of-the-Art one piece silicone optic sheet delivers industry leading optical control with an integrated gasket to
More informationROADWAY LIGHTING. Autobahn Series ATB0 & ATB2 LED Roadway
ROADWAY LIGHTING Autobahn Series ATB0 & ATB2 LED Roadway ROADWAY LIGHTING The Autobahn LED ATB0 & ATB2 Quality performance with quick payback. The Autobahn LED uses breakthrough LEDs and precision-engineered
More informationCape Girardeau, MO 40W / 60W / 80W 120W / 160W. StreetSense Series LED Street Light for roadway and area illumination 180W / 240W.
Cape Girardeau, MO 40W / 60W / 80W 120W / 160W 180W / 240W StreetSense Series LED Street Light for roadway and area illumination Patent Pending StreetSense LED Street Light Features and Benefits Patented
More informationETC. Source Four XT HID Zoom W. HID Exterior Series ORDERING INFORMATION GENERAL INFORMATION. Source Four XT HID Zoom W FEATURES
Source Four T HID Zoom 15-30 150W GENERAL INFORMATION ETC s Source Four T HID is a Source Four spotlight for all-weather use. Powerful Source Four optics, light output and energy savings in a sleek IP66-rated
More informationAvailable Beam Angles 8, 15, 30, 45, 40 x 9, 60 x 20 Shielding and Glare Control. EasyGlow TM glare reduction technology
FEATURES The LS9142 is a powerful LED fixture with exceptional light output. Available in a wide variety of optical configurations including narrow spot and bi-symetrical distributions, the LS9142 is a
More informationUFLD LED utility floodlight. Streetworks
UFLD LED utility floodlight Streetworks Total performance. Specification and budget. Eaton s UFLD family of LED Floodlights are designed to meet your most challenging specifications while keeping your
More informationFLL.RGBW. Noribachi Product Family Brochure and Specifications. Noribachi.com /
Noribachi Product Family Brochure and Specifications The FLL.RGBW provides vibrant color changing capabilities in a rugged, durable housing. The red, green, blue and white (RGBW) LED array create vibrant
More informationIVR15-SPI 1.5 Solid State Illuminated Rail 2 Post Integral Power Supply
1.5 Solid State Illuminated Rail 2 Post Integral Power Supply 1.50 RECOGNIZED 0.3 90 APERTURE Ends of Illuminated rail field cuttable to a minimum of 2 1/8 in length. Illuminated rail is available with
More information