Syringes & accessories Creating superior fluid fluidity and extremely high-precision dispensing equipment

Transcription

1 s & accessories Creating superior fluid fluidity and extremely high-precision dispensing equipment All MUSASHI syringes are specialized to meet the most severe requirements of precision dispensing operations. These are high precision, high quality, highly reliable parts that only MUSASHI can offer backed by MUSASHI s well-researched know-how for fluid dispensing. The most important points of our system that put us far ahead of the competition are: high-precision dispensing (thanks to superior fluid handling characteristics); MUSASHI s unique system dimension drawings for creating smooth piston movement; and our straight A wall design that eliminates jerky plunger movements. C These advantages lets us improve dispensing quality * and dispensing efficiency, while letting our customers save money. *C: Outside dimensions B O-ring for adapter tube Plunger (piston) head cap tip cap Needles & nozzles Clear syringes Ideal dispensing has been achieved thanks to excellent liquid flow characteristics by designing of straight wall inside the syringe This is a small polypropylene container intended exclusively for dispensing. It holds the fluid being dispensed. Its unique shape offers excellent fluid characteristics. The straight shape of the walls inside the syringe eliminates jerky plunger movements and intermittent dispensing. And, the thick walls minimize expansion and contraction. s are available with or without graduated markings for general use or for when you want to check the material level at glance. Select from nine standard sizes (listed in the table below), taking into account your daily dispensing volume. Without graduations With graduations Dimensions (A B Cmm) 1mL PSY-1E2-M φ mL PSY-3E φ Without graduations 5mL PSY-5E PSY-5E-M φ mL PSY-10E PSY-10E-M φ mL PSY-20E PSY-20E-M φ mL PSY-30E PSY-30E-M φ mL PSY-50E PSY-50E-M φ mL PSY-70E φ mL PSY-100E φ With graduations Note: Working pressure: 0.5MPa (5kgf/cm 2 ) maximum at normal temperature UV-block syringes World s First Complete blockage of UV rays and perfect visibility Polypropylene syringe exclusively designed for UV curing liquid. This model is a syringe equipped with epoch-making functions, one of which is complete UV ray blockage and the other of which is manifest visibility of the remaining liquid level provided by improved transmittance in the visible light range. Without graduations With graduations Dimensions (A B Cmm) 3mL PSY-3EU-OR φ mL PSY-5EU-OR PSY-5EU-OR-M φ mL PSY-10EU-OR PSY-10EU-OR-M φ mL PSY-20EU-OR PSY-20EU-OR-M φ Without graduations 30mL PSY-30EU-OR PSY-30EU-OR-M φ mL PSY-50EU-OR PSY-50EU-OR-M φ mL PSY-70EU-OR φ Note: Working pressure: 0.5MPa (5kgf/cm 2 ) maximum at normal temperature With graduations 6

2 Color syringe Best suited for managing products by liquid This syringe is peppermint green, which is best suited for managing products by liquid. peppermint green Without graduations Dimensions (A B Cmm) 5mL PSY-5E-PG φ mL PSY-10E-PG φ mL PSY-20E-PG φ mL PSY-30E-PG φ mL PSY-50E-PG φ Note: Working pressure: 0.5 MPa (5kgf/cm 2 ) maximum at normal temperature Mounter-specific syringe Highly stable dispensing is provided to temporary chip fixing process thanks to this syringe. This syringe can be simply equipped on a chip mounter. Dimensions (A Bmm) 20mL PSY-20P 96.6 φ26 50 A B Antistatic syringe Outstanding antistatic effect! Thorough elimination of static electricity that has a deleterious influence on electronic components! This conductive syringe prevents the buildup of static electricity that is harmful to precision electronic components. The syringe design incorporates features to prevent a buildup of static electricity and prevent static electricity damage. Dimensions (A B Cmm) 10mL PSY-10E-SEP φ mL PSY-30E-SEP φ mL PSY-50E-SEP φ Note: Working pressure: 0.5MPa (5kgf/cm 2 ) maximum, when using a PSY-10E-SEP at normal temperature 0.3MPa (3kgf/cm 2 ) maximum, when using a PSY-30E-SEP or a PSY-50E-SEP at normal temperature Stainless syringe Best suited for dispensing requiring higher pressure or higher temperature These syringes are made of SUS, and are suitable for high pressure dispensing operations at high temperature. Material: SUS303 Dimensions (A B Cmm) 1mL SSY-1B φ mL SSY-3B φ11 1 5mL SSY-5C φ mL SSY-10C φ mL SSY-30C φ mL SSY-50C φ Note: Working pressure: 0.7MPa (7kgf/cm 2 ) maximum, when using a custom-designed SUS adapter tube 0.5MPa (5kgf/cm 2 ) maximum, when using a standard adapter tube 7

3 s & accessories Adapter tube Adapter tube with clamp Thorough elimination of liquid backflow during machine stop One touch connecting! Excellence in liquid stable dispensing with high level of airtightness! This tube is used to carry the compressed air from the dispenser housing to the syringe. Adapter material: Polyacetal (AT-100E: Made of Aluminium) Tube material: Vinyl chloride (for S series dispensers: Polyurethane) O-ring material: fluororubber (nitrile rubber for 1mL type) Adapter tube Adapter tube with clamp Tube length * 1 1mL AT-1E * 2 1m 3mL AT-3E AT-3E-C 1m 5mL AT-5E AT-5E-C 1m 10mL AT-10E AT-10E-C 1m 20-70mL AT-50E AT-50E-C 1m 5mL (for Σ) AT-5E-SIGMA 1m 10mL (for Σ) AT-10E-SIGMA 1m 20-70mL (for Σ) AT-50E-SIGMA 1m 100mL AT-100E 1m Note: When ordering a specified length adapter tube, please order in steps of 0.5meters. E.g.: To order a 1.5m-long tube adapter for a 10 syringe, you would write "AT-10E-1.5M." If you want a special adapter tube used exclusively with the S series that is longer than 1m, please contact our sales office. *1. The tube length cannot be specified regarding an adapter tube with clamp. *2. AT-1E is PSY-1E2-M exclusive use. Adapter tube for plastic connector Adapter material: Polyacetal Tube material: Vinyl chloride O-ring material: Viton OD4mm type tube OD6mm type tube Tube length 3mL AT-3E-P4C AT-3E-P6C 1m 5mL AT-5E-P4C AT-5E-P6C 1m 10mL AT-10E-P4C AT-10E-P6C 1m 20-70mL AT-50E-P4C AT-50E-P6C 1m Note: 1. The tube length cannot be specified regarding an adapter tube for plastic connector. 2. Both OD4 type tube and OD6 type tube are equipped with a clamp. 8

4 Side connection adapter tube Suitable for locations where there is not enough space above the syringe In this tube assembly, the tube comes out of the side of the adapter. This model is suitable when there is not enough space above the syringe. Ex.: Mounting a dispenser on an automatic machine. Adapter material: Polyacetal Tube material: Vinyl chloride O-ring aterial: Viton Tube length 5mL AT-5E-S 1m 10mL AT-10E-S 1m 20-70mL AT-50E-S 1m 20-70mL (for Σ) AT-50E-S-SIGMA 1m Note: When ordering a specified length adapter tube, please order in steps of 0.5meters. E.g.: To order a 1.5m-long side connection adapter tube for a 10 syringe, you would write "AT-10E-S-1.5M." If you want a special adapter tube used exclusively with the S series that is longer than 1m, please contact our sales office. Antistatic adapter tube Outstanding antistatic effect! Eliminates static electricity buildup, thanks to its conductive design This conductive adapter tube prevents the buildup of the static electricity that is harmful to precision electronic components. Use this product together with an antistatic syringe. Adapter material: Polyacetal Tube material: Polyurethane O-ring material:viton Tube length 10mL AT-10E-SEP 1m 20-70mL AT-50E-SEP 1m 20-70mL (for Σ) AT-50E-SEP-SIGMA 1m Note: When ordering an adapter tube, specify the length in 0.5m units. E.g.: To order a 1.5m-long antistatic adapter tube for a 10 syringe, you would write "AT-10E-SEP-1.5M." O-ring for Adapter tube High level of airtighteness by selecting O-rings matching to the fluid materials. This is a spare O-ring for the adapter. You can select a suitable O-ring made from three kinds of material, in order to match the fluid material's dispensing requirements. Material: Fluororubber/Silicone rubber/nitrile rubber/perfluoroelastomer qfluororubber wsilicone rubber (Former model number) (Former model number) 1mL ORG-1.5-V-B-1 AOV-1E ORG-1.5-S-R-1 AOS-1E 20 3mL ORG-6-V-B-1 AOV-3 ORG-6-S-R-1 AOS mL ORG-9-V-B-1 AOV-5E ORG-9-S-R-1 AOS-5E 20 10mL ORG-11-V-B-1 AOV-10E ORG-11-S-R-1 AOS-10E mL ORG-18-V-B-1 AOV-50E ORG-18-S-R-1 AOS-50E mL ORG-24-V-B-1 AOV-100E ORG-24-S-R-1 AOS-100E 20 enitrile rubber rperfluoroelastomer (Former model number) (Former model number) 1mL ORG-1.5-N-B-1 AON-1E ORG-1.5-P-B-1 AOP-1E 20 3mL ORG-6-N-B-1 AON-3 ORG-6-P-B-1 AOP mL ORG-9-N-B-1 AON-5E ORG-9-P-B-1 AOP-5E 20 10mL ORG-11-N-B-2 AON-10E ORG-11-P-B-1 AOP-10E mL ORG-18-N-B-1 AON-50E ORG-18-P-B-1 AOP-50E mL ORG-24-N-B-2 AON-100E ORG-24-P-B-1 AOP-100E 20 Gasket for adapter tube [AT-1BST use] Material 1mL (for AT-1BST) AON-1 Nitrile rubber 9

5 Powered by TCPDF (

6 O-ring for adapter tube head cap Plunger (piston) tip cap Needles & nozzles head cap/ tip cap (former: head cap/needle cap) q r w t e Lock type Use caps to store the material left inside the syringe or to transfer the syringe to a different location These caps are used to seal the head and tail of the syringe. Material: Polyethylene for q, w, e, y, u, and i Polypropylene for r and t head cap (former: head cap) qfor ordinary materials wfor UV materials efor ordinary materials (with hook) 1mL HC-1E HC-1E-H * 50 3mL HC-3E HC-3EU-B 50 5mL HC-5E HC-5EU-B 50 10mL HC-10C HC-10U-B mL HC-50E HC-50EU-B mL HC-100E 50 * HC-1E-H is PSY-1E2-M exclusive use. y u i tip cap (normal type) (former: needle cap) rfor ordinary materials tfor UV materials Common for all sizes NC-3E NC-3EU-B 50 tip cap (knurled type) (former: needle cap) yfor ordinary materials ufor ordinary materials ifor UV materials Common for all sizes HC-5E NC-7E NC-7EU-B 50 Protective cap for syringe tip Protects the end of the syringe while a needle cap is on the other end When storing or moving a syringe containing material, this cap prevents leaks that can occur if the needle cap becomes damaged or dislodged. Protective cap for syringe tip [Type E use] Common for all sizes GC