Single Channel FM Video Transmission System 850 nm Multimode Low Profile

Transcription

1 M100 Single Channel FM Transmission System 850 nm Low Profile MTM100 - Mini Module MRM100 - Mini Module FM RRM100 - Rack Card FM RTM100 - Rack Card FM Compatible with NTSC; RS-170A & RS-343A and PAL Diagnostics:, Power and Optical Presence Small Profile PFM Transmission Optical AGC : I/O Impedance...75 Ohms Bandwidth...8 MHz Differential Gain...5% Differential Phase...5 SNR...60 db Wavelength nm Loss Budget (62.5/125µ)...12 db Maximum Transmission Distance Km -20 C to +70 C, non-condensing Module - 12 VDC Rack Card (See Part #: SR20/2) Module - 3 x 2 x Rack Card x 1 x 5 The M100, designed for Panasonic Security System products, transmits one channel of high-quality, FM video on one multimode optical fiber at 850 nm. Designed to be completely transparent to all camera and monitor manufacturers, the system indication of system status. Equipment may be ordered as stand alone modules or rack cards that are mounted in the Card Cage: SR20/2. M100 one fiber M100 Panasonic Digital Communications & Security Company

2 M30 Three Channel FM Transmission System RTM30 - ( Source) is compatible with: M30 and M100 Recievers RRM30 - (Control Site) is compatible with: M30 and M100 s Compatible with NTSC; RS 170A & RS 343A and PAL Diagnostics:, Power and Optical Presence Economical FM Transmission Three Channels Per Card : I/0 Impedance...75 Ohms Bandwidth...10 MHZ Differential Gain... 5% Differential Phase... 3 SNR...60 db Wavelength nm Loss Budget (62.5/125µ)...12 db Maximum Transmission Distance Km The M30, designed for Panasonic Security System products, transmits and receives three channels of high-quality video on three multimode optical fibers using FM transmission. This system is designed to be completely transparent to all camera and monitor manufacturers. Products require no field adjustments at installation or additional maintenance thereafter. Diagnostic Indicators provide a quick visual indication of system status. The M30 are ordered as rack cards and are mounted in the Card Cage: SR20/2. Rack Card (see Part #: SR20/2) Rack Card Requires one rack slot x 1 x RTM30 Three s RRM Panasonic Digital Communications & Security Company

3 M1485 Single Bi-Directional Transceivers Low Profile -Way & Two-Way MTM Module - Field Unit MRM Module - Control Site RTM Rack Card - Field Unit RRM Rack Card - Control Site Diagnostics: Data, Power and Optical Presence Switch Selectable 2 Wire or 4 Wire Switch Selectable Termination and Fail Safe Bias Modules or Rack Cards Single or Dual Alternative : I/O Level...1 Vpp I/O Impedance...75 Ohms Bandwidth...6 MHz Differential Gain...5% Differential Phase...3 SNR...55 db Data: Data Rate...up to 100 Kbps Data Connector...5 pin screw terminal Wavelength...850/1300 nm Loss Budget (62.5/125µ)...12 db Module - 12 VDC: 10 VA Rack Card - (See Part #: SR20/2) Module x x Rack Card requires one rack slot x 1 x 5 The M1485, designed for Panasonic Security System products, is a low cost, low profile video and bi-directional data transceiver system. The system utilizes one or two multimode optical fibers. Designed to be completely transparent, this system indication of system status. Equipment maybe ordered as stand alone modules or rack cards that are mounted in the Card Cage: SR20/2. MTM1485 or Two s RRM1485 Dome Operation PS Data Link Panasonic Digital Communications & Security Company

4 M1600P Single Bi-Directional Transceivers Low Profile -Way With Reverse Panasonic Camera and PTZ Control MTM1600P - Module - Source MRM1600P - Module - Control Site RTM1600P - Rack Card - Source RRM1600P - Rack Card - Control Site with Reverse Panasonic Camera and PTZ Control Over Optical Compatible with NTSC; RS-170A & RS-343A and PAL Diagnostics:, Power and Optical Presence Optical AGC PFM Transmission : I/O Impedance...75 Ohms Bandwidth...8 MHz Differential Gain...5% Differential Phase...5 SNR...60 db System Data Supports: Full function Panasonic Up the Coax control protocol. Wavelength...850/1300 nm Loss Budget (62.5/125µ)...12 db Maximum Transmission Distance Km -20 C to +70 C, non-condensing Module - 12 VDC Rack Card - (See Part #: SR20/2) Module x x Rack Card requires one rack slot x 1 x 5 The M1600P, designed for Panasonic Security System products, transmits high-quality, simultaneous video with reverse Panasonic Control Protocol on one multimode optical fiber. Designed to be used with Panasonic products, these systems require no field adjustments at installation or additional maintenance indication of system status. Equipment may be ordered as stand alone modules or rack cards that are mounted in the Card Cage: SR20/2. Panasonic products provide full function Bi-directional video, camera and PTZ control along with full contact closure and video genlock. Gen Lock Contact Closure Contact Closure Camera & PTZ Control M1600P Transceiver M1600P Transceiver Gen Lock Contact Closure Contact Closure Camera & PTZ Control Up the Coax Control Panasonic Digital Communications & Security Company

5 404 Single Four-Channel FM System MT404 - Module - Source MR404 - Module - Control Site RT404 - Rack Card - Source RR404 - Rack Card - Control Site Compatible with NTSC; RS-170A & RS-343A and PAL Diagnostics:, Power and Optical Presence Real Time Transmission Modules or Rack Cards Compatible with Audio/Data Modulators & Demodulators PFM Transmission Drop & Insert Capability : I/O Impedance...75 Ohms Bandwidth...10 MHz Differential Gain...3% Differential Phase...2 SNR...55 db Connector...BNC Wavelengths nm Maximum Transmission Distance Km Loss Budget (62.5/125µ)...6 db Connector...ST Module - 24 VAC Center Tap Module - 24 VAC Center Tap Module x x Module x x Rack Card requires 2 rack slots - 8 x 5 x 2 Rack Card requires 2 rack slots - 8 x 5 x 2 Maximum 7 Rack Cards per SR20/2 The 404, designed for Panasonic Security System products, transmits four channels of high-quality video on one multimode optical fiber at 1300nm. Designed to be completely transparent to all camera and monitor manufacturers, this system indication of system status. In addition, two sub-carriers can be added to each video channel using the modulators and demodulators. Equipment may be ordered as stand alone modules or rack cards that are mounted in the Card Cage: SR20/ Modulator MT404 Channel VIDEO WITH SERIES 404 A = AUDIO D = DATA CC= CONTACT CLOSURE 404 MR404 Channel Demodulator Channel Panasonic Digital Communications & Security Company

6 440 Single Four-Channel FM System MT440 - Module - Source MR440 - Module - Control Site RT440 - Rack Card - Source RR440 - Rack Card - Control Site Compatible with NTSC; RS-170A & RS-343A and PAL Diagnostics:, Power and Optical Presence Real Time Transmission Modules or Rack Cards Compatible with Audio/Data Modulators & Demodulators PFM Transmission : I/O Impedance...75 Ohms Bandwidth...10 MHz Differential Gain...3% Differential Phase...2 SNR...55 db Connector...BNC Wavelengths nm Maximum Transmission Distance...5 Km Loss Budget (62.5/125µ)...12 db Connector...ST Module - 24 VAC Center Tap Module - 24 VAC Center Tap Module x x Module x x Rack Card requires 2 rack slots - 8 x 5 x 2 Rack Card requires 2 rack slots - 8 x 5 x 2 Maximum 7 Rack Cards per SR20/2 The 440, designed for Panasonic Security System products, transmits four channels of high-quality video on one multimode optical fiber at 1300nm. Designed to be completely transparent to all camera and monitor manufacturers, this system indication of system status. In addition, two sub-carriers can be added to each video channel using the modulators and demodulators. Equipment may be ordered as stand alone modules or rack cards that are mounted in the Card Cage: SR20/ Modulator MT440 Channel VIDEO WITH SERIES 440 A = AUDIO D = DATA CC= CONTACT CLOSURE 440 MT440 Channel Demodulator Channel Panasonic Digital Communications & Security Company

7 880 Single Eight-Channel FM System MRT880 - MRR880 - Compatible with NTSC; RS-170A & RS-343A and PAL Diagnostics:, Power and Optical Presence Real Time Transmission Compatible with Audio/Data Modulators & Demodulators PFM Transmission Wall or Rack Mount : I/O Level... 1 Vpp I/O Impedance Ohms Bandwidth MHz Differential Gain... 3% Differential Phase... 2 SNR db Connector... BNC Wavelength /1550 nm Maximum Transmission Distance... 5 Km Loss Budget (62.5/125µ) db Connector...ST Universal Power Input 85 to 264 VAC, 47 to 63 Hz 40 Watts Max. 1RU High x 19 Wide x 12 Deep The 880, designed for Panasonic Security System products, transmits eight channels of high-quality video on one multimode optical fiber. Designed to be completely transparent to all camera and monitor manufacturers. This system requires no field adjustments at installation or additional maintenance thereafter. Diagnostic indicators provide a quick visual indication of system status. In addition, two sub-carriers can be added to each video channel using the modulators and demodulators. Equipment may be mounted as stand alone modules or rack units by the position of the mounting brackets MRT880 VIDEO WITH SERIES MRR Channel Channel Modulator MRT880 MRR880 Demodulator A = AUDIO D = DATA CC= CONTACT CLOSURE 8-Channel Panasonic Digital Communications & Security Company

8 8485 Single Four-Channel FM System With Bi-Directional or RS422 and RS232 MTX /Data /Data MRX /Data /Data Compatible with NTSC; RS-170A & RS-343A and PAL Diagnostics:, Data, Power and Optical Presence Switch Selectable 2 Wire or 4 Wire Switch Selectable or (1) RS422 and (1) RS232 Real Time Transmission Compatible with Audio/Data Modulators & Demodulators PFM Transmission Wall or Rack Mount : I/O Impedance...75 Ohms Bandwidth...10 MHz Differential Gain...3 % Differential Phase...2 SNR...55 db Data: Data Rate...up to 50 Kbps Data Connector...8 Pin Screw Terminal Optical ( 62.5/125µ): Wavelength...850/1300 nm Loss Budget: /Data (1300 nm)...12 db Loss Budget: Return Data (850 nm)...20 db Maximum Transmission Distance...5 km Universal Power Input 85 to 264 VAC, 47 to 63 Hz 40 Watts Max. 1RU High, 19 Wide, 12 Deep The 8485, designed for Panasonic Security System products, transmits four channels of high-quality video with switch selectable bi-directional data or bi-directional RS422 and RS232 on a single multimode optical fiber. Included in the circuit design is a switch selectable 2 or 4 wire configuration and the ability to select data line termination. Designed to be completely transparent to all camera and monitor manufacturers, this system indication of system status. In addition, two sub-carriers can be added to each video channel using the modulators and demodulators. Equipment may be mounted as stand alone modules or rack units by the position of the mounting brackets. or RS422 RS232 MTX8485 MTX8485 or RS422 RS232 Dome Operation 4 Channel PS Data Link Panasonic Digital Communications & Security Company

9 8885 Single Eight-Channel FM System With Bi-Directional or RS422 and RS232 MTX /Data /Data MRX /Data /Data Compatible with NTSC; RS-170A & RS-343A and PAL Diagnostics:, Data, Power and Optical Presence Switch Selectable 2 Wire or 4 Wire Switch Selectable or (1) RS422 and (1) RS232 Real Time Transmission Compatible with Audio/Data Modulators & Demodulators PFM Transmission Wall or Rack Mount : I/O Impedance...75 Ohms Bandwidth...10 MHz Differential Gain...3 % Differential Phase...2 SNR...55 db Data: Data Rate...up to 50 Kbps Data Connector...8 Pin Screw Terminal Optical ( 62.5/125µ): Wavelength...850/1300/1550 nm Loss Budget: /Data (1300/1550 nm)...12 db Loss Budget: Return Data (850 nm)...20 db Maximum Transmission Distance...5 km Universal Power Input 85 to 264 VAC, 47 to 63 Hz 40 Watts Max. 1RU High, 19 Wide, 12 Deep The 8885, designed for Panasonic Security System products, transmits eight channels of high-quality video with switch selectable bi-directional data or bi-directional RS422 and RS232 on a single multimode optical fiber. Included in the circuit design is a switch selectable 2 or 4 wire configuration and the ability to select data line termination. Designed to be completely transparent to all camera and monitor manufacturers, this system indication of system status. In addition, two sub-carriers can be added to each video channel using the modulators and demodulators. Equipment may be mounted as stand alone modules or rack units by the position of the mounting brackets. or RS422 MTX 8885 MTX 8885 or RS422 RS232 RS232 Dome Operation 8 Channel PS Data Link Panasonic Digital Communications & Security Company

10 SR20/2 Subrack Equipment Rack SR20/2 - Equipment Rack 19 EIA Subrack Frame Rear Power Bus to all plug-in cards Blank panels available for 1, 2, and 4 slots 100W DC Power Supply included The SR20/2, designed for Panasonic Security System products, Equipment Subrack is a system that can be configured with any combination of products including transmitters, receivers or transceivers. POWER SUPPLY Universal Power Input 85 to 264 VAC Detachable AC line cord 100 Watt Switching Power Supply Blank Panels Available for 1, 2 or 4 slots The 100 W power supply features a universal power input of 85 to 264 VAC with no switch selection required, high efficiency and current limiting. MODEL NUMBER NO. OF PLUG-IN CARDS WEIGHT DIMENSIONS W H D SR20/ /5 lbs /4 7 5 /8 Panasonic Digital Communications & Security Company

11 BarcodesInc 200 West Monroe Street Chicago, Illinois Phone: Fax: About BarcodesInc BRANDS Who We Are BarcodesInc is North America's leading provider of p We Owe Our Success To You Why Choose BarcodesInc? Dedicated Account Our Account Managers will not compromise when it comes to providing you top-notch service. Your Account Manager is the primary point of contact for your business and makes it a priority to get to know you, your company and all your needs. Highly-Trained Technical Support Our technical staff has the broadest knowledge and every significant certification in the industry. of our friendly experts is always available to suggest products and solutions for any situation. Incredible Value Our purchasing power means big savings for you. Whatever your project, our team will work hard to deliver a solution that fits your budget. Largest Inventory in the Industry and Same-Day Shipping Whatever your barcoding, mobile computing, or printing needs, we will fill your order and ship it the same Premier Access to Top Manufacturers BarcodesInc maintains strong strategic partnerships with the leading manufacturers in barcoding, mobile computing, printing and RFID. Responsive Customer Service Every phone call and is responded to promptly, completely and accurately by our customer service Easy Returns Damaged, defective or incorrectly ordered goods may be returned without hassle. AND MORE BarcodesInc 200 West Monroe Street, Chicago, IL T: F: