ANT Vandal Resistant 3G/4G/LTE Omni-Directional Antenna

Transcription

1 Applications Kiosks Vending Machines Digital Signage Video Surveillance Point-of-Sale Terminals SCADA / Telemetry / PLCs Product Features Vandal Resistant Low Profile ~ 3 inches Tall Weatherproof Compatible with all 3G & 4G/LTE Networks Compatible with most Cellular Modems/Routers 3 5 dbi Peak Gain Omni-Directional SMA Male Connector on 10 ft Low-Loss Coax Ordering Information Part No. ANT Description Vandal Resistant Low Profile 3G/4G/LTE Omni-Directional Antenna dbi Gain - Fixed Mount - 10 ft Coax Lead General Description This low profile (~ 3 inches tall) fixed screw mount omni-directional antenna provides 3 to 5 dbi of gain and supports all cellular frequency bands for AT&T, Verizon, Sprint, T-Mobile, Bell, Rogers, Telus and other cellular carriers worldwide. Ideal for use in vending machines, meter housings, equipment sheds, NEMA enclosures or other locations requiring a low-profile vandal resistant external antenna. Also suitable for vehicle mounting on buses, vans, trucks or other mobile installations. Permanently mounts via a 5/8 in. (16 mm) hole with locking internal nut. Resists vandalism with no exposed coax cable, high impact ABS radome shell and an extra thick threaded mounting post. Includes 10 ft of low-loss RG58U coax fed through center mounting post. Includes "L" bracket for optional wall mounting. Integrated SMA male plug connector mates with SMA female jack found on most cellular modems and routers. Completely waterproof (IP67) when properly installed with post extending into a water-tight enclosure. Not waterproof when used exclusively with wall bracket. For optimum performance this antenna should be mounted on a flat, horizontal metal surface at least 8 inches in diameter. Proxicast, LLC. All rights reserved. - 1 of 7 -

2 Electrical Specifications Parameter Frequency Range Gain Rating / MHz includes all 2G, 3G, 4G, LTE Bands 3 5 dbi VSWR 2.0:1 Input Impedance 50 Ohm Polarization Max Input Power Ground Plane Vertical 50 W 8 inch (20 cm) diameter min Mechanical Specifications Parameter Connector Type Cable Length Height Diameter Weight Materials Antenna Color Operating Temperature Environmental Rating Rating SMA Male (plug) 10 ft (3 m) of LMR RG58U low-loss coax Radome: 3.2 inches (82 mm) above mounting surface Overall: 4.0 inches (102 mm) Radome: 1.9 inches (48 mm) at base Mounting post: 0.55 inches (14 mm) 6.2 oz (176 g excluding mounting bracket) Radome: UV stabilized ABS plastic Connector: Brass with Nickel plating Mounting Bracket: Aluminum Adhesive Pad: Urethane Foam Black -40 C to +70 C IP67 (waterproof) Operation of this device outside the parameter ranges given above may cause permanent damage. - 2 of 7 -

3 Mechanical Dimensions With Wall Mounting Bracket - 3 of 7 -

4 Radiation Patterns 800 MHz Horizontal (Azimuth) Plane Vertical (Elevation) Plane - 4 of 7 -

5 Radiation Patterns 1850 MHz Horizontal (Azimuth) Plane Vertical (Elevation) Plane - 5 of 7 -

6 Radiation Patterns 2700 MHz Horizontal (Azimuth) Plane Vertical (Elevation) Plane - 6 of 7 -

7 Installation Instructions Position away from: CRT/TVs Lighting fixtures & motors Other antennas & wireless devices Low-E or tinted/coated windows Large vertical metal or concrete objects Drill a 5/8 (16mm) hole in flat horizontal surface Remove mounting nut & washer and feed coax cable through hole Remove bottom plastic liner to expose adhesive Press antenna into hole and tighten nut & washer from underneath Optionally apply a thin bead of silicone caulk around the antenna rim Use 2 identical antennas spaced 22 inches apart if modem supports diversity or MIMO Keep coax lead cable as short as possible & weatherproof all outdoor connectors Contact Information For the latest specifications, additional product information, worldwide sales and distribution and information about Proxicast: Web: Tel: sales@proxicast.com Proxicast 312 Sunnyfield Drive, Suite 200 Glenshaw, PA USA For technical questions and application information: support@proxicast.com Important Notice The information contained herein is believed to be reliable. Proxicast makes no warranties regarding the information contained herein. Proxicast assumes no responsibility or liability whatsoever for any of the information contained herein. Proxicast assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. Proxicast products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. - 7 of 7 -