TECHNICAL DATA SHEET Family code C2424SOLPCORD CAT 6 UTP Solid. version 1 LSNH PATCHCORD date page 1/5

Size: px

Start display at page:

Download "TECHNICAL DATA SHEET Family code C2424SOLPCORD CAT 6 UTP Solid. version 1 LSNH PATCHCORD date page 1/5"

Ashlynn Rogers
5 years ago
Views:

1 page 1/5 Application: High Density Switch & Hub Working area cord and telecommunications equipment cord in Local Area Networking environments Support current and future Category 6 applications, such as: 1000Base-T (Gigabit Ethernet), 100 Base-T, 10 Base-T, FDDI, ATM General standards: ISO/IEC nd edition, 2002 EN , 2002 ANSI/TIA/EIA 568-B.2-1, 2001 IEC , 2009 FCC 47, Part 68, Subpart F IEC 603-7, 1990 (for plug) Construction Figure 1 Belden CAT 6 modular cord assembly 1. Patch cord structure (In figure 1) Cable Jacket: LSNH (Low Smoke Zero Halogen) Plug Housing: Polycarbonate (PC), UL 94V-2 rated Contact Blade: Phosphor bronze plated with 1.27um gold over 2.54um nickel undercoat Assembly: 568B on both sides Boot: PVC (Drawing referred to PX )

2 2. Patch cable structure (Shown in Figure 2) TECHNICAL DATA SHEET Family code C2424SOLPCORD page 2/ Figure 2 CAT 6 solid UTP patch cable 1) Conductor Diameter 2) Insulation Nominal diameter over insulation 3) Cable core Pair Number of pairs Colour code pair 1 Colour code pair 2 Colour code pair 3 Colour code pair 4 Solid bare copper ETP AWG 23 (0.58mm) Polyethylene(PE) 1.03 ± 0.06 mm 2 twisted insulated conductors 4, all twisted together White & Blue / Blue White & Orange / Orange White & Green / Green White & Brown / Brown 4) Jacket LSNH Diameter 6.5± 0.2 mm Color Refer to PS Standard text: BELDEN SOLID UTP CAT 6 LSNH MODULAR CORD 4PR/23 AWG

22 and up with Patch cords test head adapter (Fluke Networks part number DTX-PCU6S) And the test setup is shown in Figure 3.

3 page 3/5 Technical information 1. Electrical characteristics The patch cords are tested on the coils for NEXT and return loss. (>180mm diameter) The equipment is: Fluke DTX1800 (Fluke Networks part number DTX-1800) Firmware revision 2.22 and up with Patch cords test head adapter (Fluke Networks part number DTX-PCU6S) And the test setup is shown in Figure 3. Patch cords under test (coiled in 180mm diameter) Fluke DTX Main Fluke DTX remote Figure 3. NEXT & Return loss Test setup for the patch cords NEXT requirement: 1dB margin compared to TIA/EIA-568-B.2 Limit (See Annex 1) Return loss requirement: 1dB margin compared to TIA/EIA-568-B.2 Limit (See Annex 1) Current Rating: 1.5 A Insulation Resistance: 100 MΩ min. Contact Resistance: 20 mω max. Dielectric Strength: 500 VAC (rms) Voltage: 72 VDC max.

4 page 4/5 2. Mechanical characteristics Insertion Life: 750 mating cycles Temperature rating installation: 0/50 Temperature rating operation and storage: -20/60 Part number structure Packaging Each patch cord is packed in a plastic bag with identification label. Each carton to be filled in line with the defined packaging quantity for the different lengths. Change history: Length in Metres Quantity per carton : First issue of this specification.

environmental regulations EU RoHS (Directive 2002/95/EC, 27 January 2003);

5 page 5/5 Annex 1 Required Electrical performance for the CAT 6 UTP solid patch cord Belden declares this product to be in compliance with the environmental regulations EU RoHS (Directive 2002/95/EC, 27 January 2003); this is valid for all material produced after the RoHS compliant date for this product.

UTP Cat 5e cable (200 MHz) (PVC sheath)

UTP Cat 5e cable (200 MHz) (PVC sheath) JetLan is the only structured cabling system that includes all the passive components required for the installation or adaptation of your data network, as we include all the different types of high performance