Operator Interface Enclosures

Transcription

1 Series NEMA 12, 4, 4X External Components Pedestal Maintains NEMA rating of system. Formed 14 gauge steel. Also offered with formed 14 gauge Stiffeners added for solid stability. Open top and bottom provides an unobstructed wireway for pull through cabling. Can be mounted directly on floor or on a plinth. Available in beige, gray and 2CRS 2CPS 2CSS Finish RAL 7032 Beige ASA 61 Gray Stainless Steel Modular Plinth Features removable front and rear panels for easy access to bottom for cabling or transport by forklift. For cable access, features 3 double knockouts on each end. (NOTE: not on stainless steel version) Available in 4" and 8" heights. Available in 24", 36", 48" and 60" widths. Maintains NEMA rating of system. Formed 14 gauge steel. Also offered with formed 14 gauge Available in beige, gray and RAL 7032 Beige ASA 61 Gray Stainless Steel A B1 B2 2CRP CPP CSP CRP CPP CSP CRP CPP CSP CRP CPP CSP CRP CPP CSP CRP CPP CSP CRP CPP CSP CRP CPP CSP

2 Series NEMA 12, 4, 4X External Components Footrest Generally used in combination with plinth. Provides a raised foot support to relieve back stress. Gives the installation a "finished" appearance. Available in 24", 36", 48" and 60" widths. Maintains NEMA rating of system. Formed 14 gauge steel. Also offered with formed 14 gauge Rubber tread for added traction on footrest surface. Available in beige, gray and natural RAL 7032 Beige ASA 61 Gray Stainless Steel B 2CRF24 2CPF24 2CSF CRF36 2CPF36 2CSF CRF48 2CPF48 2CSF CRF60 2CPF60 2CSF60 60 Turret/Terminal Window Door Maintains the NEMA rating of the enclosure. Constructed of 14 gauge steel and lexan window. Easy field installation. Fits Standard Turret, Deep Turret, and Data Terminal. Offered in 24" width only. Available in beige, gray and Finish Data Terminal Extension Ring Formed 14 gauge steel. Adds 6 to Data Terminal Depth. Maintains NEMA rating. Utilizes door from Data Terminal. Fastens flush to back of Data Terminal. Available in beige, gray and natural 2CRD24X 2CPD24X 2CSD24X Finish RAL 7032 Beige ASA 61 Gray Stainless Steel 2CRTW24 2CPTW24 2CSTW24 RAL 7032 Beige ASA 61 Gray Stainless Steel 259

3 Series NEMA 12, 4, 4X External Components Base Cover Should be used to close top opening (of either single or dual access) base when no other components are mounted on the base s top. Constructed of 14 gauge steel. Available beige, gray and stainless steel. Can also be used on the underside of a Standard Desk Unit, Standard Turret and Data Terminal. RAL 7032 Beige ASA 61 Gray Stainless Steel B 2CRBC2436 2CPBC2436 2CSBC CRBC3636 2CPBC3636 2CSBC CRBC4836 2CPBC4836 2CSBC CRBC6036 2CPBC6036 2CSBC Desk Cover For use when no turret is used on top of desk. Provides a hinged, flat, sturdy desk surface. Available for either Standard or Deep desks. Constructed of 14 gauge steel. Features quarter turn latches for easy access into flat desk top. Available in beige, gray and RAL 7032 Beige ASA 61Gray Stainless Steel B1 B2 B3 C Standard Depth Desk Cover 2CRDC2436 2CPDC2436 2CSDC CRDC3636 2CPDC3636 2CSDC CRDC4836 2CPDC4836 2CSDC CRDC6036 2CPDC6036 2CSDC Deep Depth Desk Cover 2CRDC2443 2CPDC2443 2CSDC CRDC3643 2CPDC3643 2CSDC CRDC4843 2CPDC4843 2CSDC CRDC6043 2CPDC6043 2CSDC

4 Series NEMA 12, 4, 4X External Components/Internal Accessories Base Window Door Maintains the NEMA rating of the enclosure. Constructed of 14 gauge steel and lexan window. Easy field installation. Available for the 4 base widths. On 2 door units, a window can be installed on one side only. Available in beige, gray and RAL 7032 Beige ASA 61 Gray Stainless Steel Fits Base Width B C 2CRBW24 2CPBW24 2CSBW CRBW36 2CPBW36 2CSBW CRBW48 2CPBW48 2CSBW CRBW60 2CPBW60 2CSBW Base Panel 14 gauge steel panels are finished in white. Used in both single access and dual access bases. Available in 4 widths. Mounts into "C" Channel Mounting Kit (not included.) Fits Base Width Height Width Depth 2CWBP CWBP CWBP CWBP Consolet Panel 12 gauge steel panels. Available in 4 widths. Mounts onto panel mounting studs in consolet. Finished in white. Fits Consolet Width Height Width Depth 2CWCP CWCP CWCP CWCP Hardware required for mounting into "C" channels is included. 261

5 Series NEMA 12, 4, 4X Internal Accessories Desk Inner Panel 12 gauge steel panels. Used in both Standard and Deep desks. Available in 4 widths. Mounts horizontally onto panel mounting studs in bottom of desk. Finished in white. Fits Consolet Width Height Width Depth 2CWDP CWDP CWDP CWDP Terminal Keyboard Shelf Designed specifically for use in Data Terminal. Sloped wrist rest provides comfort for operator. Locks in place when extended. 20" width accommodates standard width keyboards. Slides included. Height Width Depth 2CWDSR Swing Frame Available in 19" and 24" widths. Variable depth feature allows front to rear adjustment. Installs with either left or right hinging. Mounts onto Rail Support Kits (not included)...see page 263. Clip nuts required for mounting to punched rails...see page 271. Fits Console Fits Console Panel Panel Unit Size Width Height A B 2CSFT19 Turrets/Terminal 24,36,48,60 19" 8U CSFT24 Turrets/Terminal 36,48,60 24" 8U CSFB19 Bases 24,36,48,60 19" 12U CSFB24 Bases 36,48,60 24" 12U

6 Series NEMA 12, 4, 4X Internal Accessories C Channel Mounting Kit For use in Turrets, Data Terminals and Bases. Provide adjustable (side to side) mounting support for Base Panels and all Rail Support Kits. Available in 4 widths. Fits Console Width A 2CMC CMC CMC CMC Rail Support Kit Separate kits for Standard Turret/Data Terminal, Deep Turret and Bases. For use with Swing Frame, CRT Mounting Kit and Combination Rails. Mount into "C" channels (not included - see above). 2CTRSK36 2CTRSK43 2CBRSK Fits Console Unit Turret/Terminal Deep Turret Base Combination Rails Provide standard 19"/24" mounting for electronic equipment or other console accessories. Features punched universal EIA spacing. Mounts onto Rail Support Kits (not included - see above). Clip nuts required for mounting to punched rails...see page 271. Finished in black. CRT Mounting Kit Adjustable width allows for mounting of most CRT models. For use in Turrets or Data Terminal. Mounts onto Rail Support Kits (not included - see above). Units Fits Console Unit 2CTRK 9 Turrets/Terminal 2CBRK 13 Base 2CRTK 263

7 Series NEMA 12, 4, 4X Internal Accessories Printer and Paper Stand Provides convenient pullout access and support for printers in bases. Two versions available for high or low applications. Mounts onto Combination Rails (not included)...see page 263. Slides included. Description Height 2CLPS Low Printer Stand CHPS High Printer Stand Low Printer Stand High Printer Stand DIN Rail Support Kit Provide adjustable mounting support for DIN rails (sold separately.) For use in Bases only. Mount into "C" channels (not included)...see page 263. Gas Filled Door Support Provide "lift assist" and door support for rear Turret/Data Terminal doors and Desk lids. Replace standard manual door supports. Finished in black. Sold individually. Recommend 1 for 24"/36" and 2 for 48"/60". 2CDMK 2CDSTP 264

8 Series NEMA 12, 4, 4X Internal Accessories DIN Rails Field installable. Includes a set of 3 plated rails. Available in 3 industry standard profiles - DIN 1, DIN 3, and CENELEC. DIN Rail Support Kit required...see page 264. Rails have a 0.28 x 1.25 oblong slot on each end. Asymmetric DIN1 Symmetric DIN 3 Cenelec Profile Profile Profile Length 2D1K12 2D2K12 2DCK D1K16 2D2K16 2DCK D1K20 2D2K20 2DCK D1K24 2D2K24 2DCK D1K30 2D2K30 2DCK For sizing, refer to master selection table...see page 256. Asymmetric DIN 1 Profile Symmetric DIN 3 Profile CENELEC Profile Micro Cell Cable Entry Kit For use in Single or Dual Access Bases. Constructed of 14 gauge steel. Features 2 cutouts for cable access. Underside of cutouts covered with black foam rubber, which when punctured for cable access, still maintains a virtually sealed bottom. Mobile Keyboard Support Installs easily at any location along front of Desks or Consolet. Provides auxiliary or temporary keyboard support. 20" width accommodates standard width keyboards. Requires two drilled holes to permanently mount. 2CMBPK 2CMKS24 265

9 Series NEMA 12, 4, 4X Rack Mount Accessories Flat Steel or Aluminum Panels Economical panels are made from high quality steel or aluminum. Mounting hardware not included, please order separately. Available in beige (CG2), black (BK2) or gray (GY2). Aluminum panels are also available unfinished (UNF). Formed Steel Panel A 0.50 fold top and bottom adds strength without increasing the panel thickness. Mounting hardware not included, please order separately. Available in beige (CG2), black (BK2) or gray (GY2). No. of Panel Height Flat 14 Gauge Flat 0.125" Formed 16 Gauge Slots Inches Units Steel (0.075") Aluminum Steel (0.060") PBPS PBPA PBFS PBPS PBPA PBFS PBPS PBPA PBFS PBPS PBPA PBFS PBPS PBPA PBFS PBPS PBPA PBFS PBPS PBPA PBFS PBPS PBPA PBFS PBPS PBPA PBFS PBPS PBPA PBFS PBPS PBPA PBFS PBPS PBPA PBFS PBPS PBPA PBFS PBPS PBPA PBFS PBPS PBPA PBFS PBPS PBPA PBFS PBPS PBPA PBFS PBPS PBPA PBFS Specify color code. Beige (CG2), Black (BK2) or Gray (GY2). 1 unit = Specify color code. Beige (CG2), Black (BK2) Gray (GY2) or Unfinished (UNF). When unfinished, panels are paper covered on one side. 266

10 Series NEMA 12, 4, 4X Rack Mount Accessories Panel Width Adaptors Used for adapting flat 19" or 23" panels for 24" rack mounting. Mounting hardware not included, please order separately. 19" sold in pairs, 23" sold individually (only 1 required). Available in beige or black. Panel Height For 14 Ga. Steel (0.075") Inches Units 19" Widths PBAS PBAS PBAS PBAS PBAS PBAS PBAS PBAS Specify color code. Beige (CG2) or Black (BK2). 2 23" to 24" adaptors are available in these heights only; substitute "23" for "19" in the part no. Storage Drawer Kit Complete drawer kit with slides and lock. Available in 3 depths. Rear support brackets included for all depths. Available in beige or black. 19" Drawer Kit Part Numbers Panel Height 12" Deep Drawer 16" Deep Drawer 22 Deep Drawer Inches Units RDRW RDRW RDRW RDRW RDRW RDRW RDRW RDRW RDRW RDRW RDRW RDRW Specify 3 digit color code. Beige (CG1) or Black (BK1). 1 unit = 1.75" For 24" panel width versions, substitute 19 with 24 in the part number. Equipment Slides Sold in pairs. Mounts on combination rail front flange (not included). Weight (A) Length Capacity (Pair) RSLIDE lb RSLIDE lb RSLIDE lb 267

11 Series NEMA 12, 4, 4X Rack Mount Accessories Adjustable Support Angles Angles mount on accessory rails with either leg used as support depending on requirements. Slots allow up/down or front/back adjustments. Made of 14 gauge steel, with dimensions of 1.75" x 1.75". Finished in black (BK3). Mounting hardware not included, please order separately. (Pair) Length (Inches) RASA12BK RASA16BK RASA22BK Fixed Chassis/Shelf Can be used as a permanently mounted support shelf between accessory rails or as a pull-out chassis. Accepts optional slides for pull-out application...see page 267. Material is 18 gauge (shelf) and 14 gauge (brackets). Shelf is 16.8" wide x 0.5" high. Refer to table at right for depth. Finished in white. Shelf Bracket Panel Depth Depth Width (In.) (In.) RASC1912WH RASC1916WH RASC1922WH RASC2412WH RASC2416WH RASC2422WH Equipment Shelf This closed utility shelf has 1.5 diameter cord access holes in each bottom corner. Fabricated from 18 gauge steel on top, bottom and sides. Inside dimensions are: 17.2" (wide) x 15.0" (deep). Height is 1" less than panel space. Finished in white. Mounting hardware not included, please order separately. Adjustable Support Bar This 16 gauge steel support fastens between accessory rails for support across rear of equipment. Minor modification required for use with tapped rails. Finished in black. Panel Height Inches Units RASE WH RASE WH RASE WH unit = 1.75 Length (Inches) RASB19BK1 19 RASB24BK

12 Series NEMA 12, 4, 4X General Accessories Optional Locks & Latches Field installable. Interchangeable with standard latches. Maintains NEMA Type 4, 4X,12, 13 rating. 2WKL 2SQI7 2SQK7 2TRI7 2TRK7 2SLI 2QPL Description Wing knob lock, zinc die/black 7mm square insert, black 7mm square key, fits 2SQI7 7mm triangle insert, black 7mm triangle key, fits 2TRI7 Slotted insert, black Padlockable quarter turn latch, black Series 2000 Console Casters Locking and non-locking versions. Mount directly to plinths. Sold in pairs to provide ability to mix locking an non-locking. Recommend 4 casters for 24"/36" and 6 casters for 48"/60". Weight capacity of 500 lbs. per pair. Type No. of Casters 2CCSTL Locking 2 2CCSTN Non-Locking 2 269

13 Series NEMA 12, 4, 4X General Accessories Description 1421 pkg. of 4 screws & 4 washers Nickel plated x 0.63" combo slot, Phillips oval countersunk head screws with steel cup washers. 1421B Description pkg. of 4 screws & 4 washers Nickel plated x 0.5" thumb screws with nylon washers for captivating panels up to 0.09" thick. Head is 0.62" diameter x 0.37" high. 1421A Description pkg. of 4 screws & 4 washers Nickel plated x 0.63" combo slot, Phillips oval countersunk head screws with plastic cup washers. 1421B2 Description pkg. of 2 screws, nuts & washers Polished stainless steel 1/ 4-20 x 0.87" thumb screws with nylon washers and steel nuts for captivating panels up to 0.4" thick. Head is 0.68" diameter x 0.25" high. Description 1421A25B pkg. of A100B pkg. of 100 Nickel plated x 0.63" combo slot, Phillips oval countersunk head screws. Description 1421A25W pkg. of A100W pkg. of 100 Black plastic cup washers for countersunk screws. Description 1421D pkg. of 25 Zinc plated x 0.5 slotted pan head screws. 270

14 Series NEMA 12, 4, 4X General Accessories Description 1421E25W pkg. of E100W pkg. of 100 Nickel plated metal cup washers for countersunk screws. Description 1421N25 pkg. of N100 pkg. of clip nuts for all panel rails and most other mounting positions. Has the holding strength of a standard nut. Description 1421F25 pkg. of 25 Stainless steel x 1.25" Phillips oval countersunk head (the extra length is necessary for raised panels). Description 1421NP25 pkg. of NP100 pkg. of 100 Zinc plated clip nuts clip nuts for all panel rails and most other mounting positions. Has the holding strength of a standard nut. Description 1463S pkg. of 3 3/ 8-16 spring loaded nuts and 3/ 8-16 x 0.75" bolts for "C" channels. Description 1421K25 pkg. of 25 screws & nuts 1421K100 pkg. of 100 screws & nuts Zinc plated 1/ 4-20 x 0.5" slotted round head screws with captive star washer nuts. Supplied with all panel rails and racks. Description 1421S pkg. of 4 1/ 4-20 spring loaded nuts and 1/ 4-20 x 0.62" round head bolts for "C" channels. 271