SD250 VARIABLE SPEED DRIVE

Transcription

1 VARIABLE SPEED DRIVE SD250 Ranging from 0.4kW to 22kW, V and Vac Easy programming and monitoring through cursors and digital display, removable up to 5m Wide range of accessories: RFI filter, harmonic filters, dv/dt output filter, Profibus gateway, Ethernet gateway and DeviceNET module Conformally coated electronics, IP20 protection and operation up to 50 C 3 year warranty and 24h service and replacement commitment 32-33

2 05. SD250 SERIES The SD250 series from Power Electronics is a compact and versatile variable speed drive suitable for multiple low power applications, by offering a competitive solution where many units are required. Divided in six frame sizes, this intuitive VSD covers a range from 0.4kW to 22kW and offers a wide range of accessories such as RFI filter, filters dv/dt, input filters and display extension kits that complete its standard features. Our technicians will give you telephonic assistance 24h/7d during installation and commissioning, and if necessary our committment to repair or replace the unit guarantees the success of your operation. THE MOST PROFITABLE SOLUTION TAILORED YOUR FACILITIES

3 Discovering SD250 CONFORMAL COATING Protects the sensitive electronic equipment from moisture, dust and corrosive gases, reducing maintenance and increasing their reliability. EASY LOCAL AND REMOTE USED Thanks to its intuitive programming console the commissioning process becomes simple. By using the Modbus-RTU (RS-485) serial communication, you will be able to check the operating status (voltage, current, frequency, etc) and to modify the running parameters of your system (frequency ramp, max. frequency, PID reference, etc.). DISPLAY EXTENSION KIT SD250 offers the possibility to install the display up to 5m away from the drive. Install SD250 display in the front door of the cabinet and you can safely operate the unit. EASY INSTALLATION AND SERVICING Two holes allow the user to screw the unit to a panel mounted in your cabinet. The rear cooling fans can be easily removable from the bottom part and the front connections reducing wiring complexity. PARAMETER READING, COPYING AND WRITING FUNCTIONS ALLOW A QUICK AND EASY PROGRAMMING OF MULTIPLE UNITS 34-35

4 05. STATUS INDICATION LEDS SD250 SERIES SEGMENTS DISPLAY DISPLAY DESCRIPTION LOCAL STOP/ RESET RUN STOP/ RESET Run command Stop command. Reset faults BUTTON Parameters scrolling Parameters scrolling Groups scrolling Groups scrolling Confirmation and enter FWD Lit during forward run CURSOR LED REV RUN Lit during reverse run Lit during operation INTEGRATED MEMORY SET Lit during parameter RUN APPLICATIONS. The SD250 variable speed drives from Power Electronics are designed to cover a wide range of applications. They are suitable for industries such as water treatment, food and beverage, ventilation systems, material processing, lifting systems, textiles, plastic, wood and chemistry. LOW VOLTAGE / POWER ELECTRONICS

5 Control and precision The SD250 is present in all industries, where motor protection, high accuracy and easy to install are the minimum requirements of system integrators or original equipment manufacturers

6 The open-loop vector control provides excellent control as well as powerful torque. T máx. T arranque Par (%) 05. SD250 SERIES 50% Velocidad (Hz) 1Hz 10Hz 40Hz 50Hz 60Hz BUILT-IN PID CONTROL This function enables the control of a wide variety of system variables: flow, pressure, temperature, etc., without any additional external controller. SYSTEM SET-POINT Feedback signal PID CONTROLS THE SYSTEM Control loop PUMP PRESSURE TRANSDUCER ENERGY SAVING The variable speed drives reduce the energy consumption of the motor according to the demand of the system. They can save up to 70% of the energy consumption and reduce the maintenance task on your facility. ROBUST DESIGN AND EASY INSTALLATION The SD250 series of Power Electronics can operate at temperatures up to 50 C without derating or 150% overload, enabling its use in adverse conditions. It also protects the motor against any grid anomaly. Its compact and book type design, a rear cooling system and its frontal connections enable the user to install easily multiple units in a compact cabinet. LOW VOLTAGE / POWER ELECTRONICS

7 Technical Characteristics Wiring control INPUT OUTPUT ENVIRONMENTAL CONDITIONS PROTECTIONS COMMUNICATION INPUTS /OUTPUTS Power range Voltage power 0,4kW - 22kW Input frequency 50~60 Hz ±5% EMC/RFI Filter Class 2 Harmonics filter Input rectifier technology Overload capacity Frequency ratings Control Method Vca, Vca (-15% a +10%) (trifásico) Three phase and external dc optional Diode 150% during 60 sec. 400Hz Efficiency >98% Modulation method Modulation frequency V/Hz control, Vector control (Sensorless) Vector space modulation Maximum 15kHz Output cable length USC 50m, SC 25m [1] Dynamic brake Degree of protection Operation temperature Storage temperature Relative humidity Altitude Power altitude derating (> 1000m) Vibration Ventilation Built-in. Optional dynamic braking IP20-10 C to +50 C -20 C to +70 C <90%, non-condensing 1000m (>1000m)-1% per 100m; maximum 3000m 5,9m/sec 2 (=0,6G) Air forced refrigeration Motor thermal model Motor stall warning Low voltage Phases current imbalance Over voltage Ground fault Overload warning Dynamic brake resistor thermal model Torque limit and torque limit time (adjustable) Short-circuit Mean torque 100% of braking during 5s. Communications fault Overtemperature Stall motor protection Input/Output phase loss Standard Hardware RS485 port Standard Protocol Modbus-RTU Optional Hardware Profipower, Ethernet, N2 Metasys Optional Protocols Profibus, Devicenet Analogue inputs 1 input 0-10Vac ±10Vdc / 1 input 0-20mA or 4-20mA Digital inputs 8 configurable inputs Analogue outputs 1 output 0-10Vdc Relay output 1 Changeover programmable relay (250Vac, 1A; 30Vdc, 1A) 1 Programmable open collector transistor output (26VDC, 100mA) CONTROL Display Keypad and digital programming unit. Removable optional REGULATIONS CE, ctick, UL [2], cul [2] NOTES [1] Other configurations, consult Power Electronics. [2] On process. WIRING CONTROL Factory Settings Multi-Func.OpenCollector Output< 26VDC,100mA 24V Output ForwardRun (FX) ReverseRun (RX) Common Emergency Stop(BX) TripReset (RST) JogOperation (JOG) Common Multi-StepFreq.-Low Multi-StepFreq.-Middle Multi-StepFreq.-High 10 PowerSupplyforPotentiometer Voltage Signal Input0-10V Current Signal Input0-20mA Multi-Func.Analogue Output 0-10V RS485 Communication Terminal MF Input Terminals 1-2 MF Input Terminals 3-5 MF Input Terminals 6-8 3A 3C 3B MOMG 24 P1 P2 CM P3 P4 P5 CM P6 P7 P8 VR V1 I AM S+ S- Multi-Func.Relay (< 250Vac, 1A; 30VDC,1A) 24VDC 80mA max. Note: The MO output has been designed for a maximum current of 80mA

8 Topologies Dimensions and Weights 05. TOPOLOGIES B SD250 SERIES P1(+) L 1 L 2 L 3 Optional Optional harmonics RFI filter filter R S T Optional dv/dt filter U V W PE RECTIFIER DC BUS DYNAMIC INVERTER BRAKE N(-) Frames 5 and 6 can optionally integrate DC harmonic filters. DIMENSIONS (mm) AND S ,76 2 1, ,87 4 3, LOW VOLTAGE / POWER ELECTRONICS

9 Standard ratings Accessories CONFIGURATION TABLE SD SD250 series Rated voltage Output current SD V 01 1,25A V A [1] Verifiy the rated current of the motor nameplate to guarantee the compatibility with the selected drive. STANDARD RATINGS 200Vac-230Vac (-15% a 10%) POWER CODE I(A) Rated kw HP SD SD SD SD SD SD SD SD SD SD SD Vac-480Vac (-15% a 10%) POWER CODE I(A) Rated kw HP SD SD SD SD SD SD SD SD SD SD SD ACCESSORIES CODE SD25TCD I001 I002 SD25CF1 ACCESSORIES DESCRIPTION DeviceNet communication module Profibus Ethernet Display extender kit (5 meters) RFI FILTERS CODE CURRENT I (A) LEAKAGE CURRENT I(mA) VOLTAGE (V) DIMENSIONS (mm) Rated Maximum W D H APPLICABLE DRIVES FESD SD25203, SD SD25301, SD25302 D W FESD , SD25208 INPUT FESD , SD25304 FESD , SD25212, SD25217 FESD , SD25306, SD25309 H FESD , SD25224, SD25232 FESD , SD25312, SD25316 FESD SD25246, SD25260 OUTPUT FESD SD25324, SD25330 FESD SD25274, SD25288 FESD SD25339, SD

10 05. INPUT HARMONICS FILTER SD250 SERIES CODE CURRENT I (A) VOLTAGE (V) DIMENSIONS (mm) W D H APPLICABLE DRIVES FHSD SD25301, SD25302, SD25304 FHSD SD25306 FHSD SD25309, SD25312, SD25316 FHSD SD25324 FHSD SD25330 FHSD SD25339, SD25345 W D W D H H OUTPUT dv/dt FILTERS MODEL CODE CURRENT I (A) DIMENSIONS (mm) W D H APPLICABLE DRIVES SD25203, SD25205, SD25208, SD (IP00) 2 (IP23) SD25217, SD25224, SD25232, SD25301 FSDVDT SD25302, SD25304, SD25306, SD25309 SD25312, SD25316, SD25324, SD25330 FSDVDT SD25246, SD25339, SD25345 FSDVDT SD25260 FSDVDT SD25274, SD25288 SD25203, SD25205, SD25208, SD25212 SD25217, SD25224, SD25232, SD25301 FSDVDT SD25302, SD25304, SD25306, SD25309 SD25312, SD25316, SD25324, SD25330 FSDVDT SD25246, SD25339, SD25345 FSDVDT SD25260 FSDVDT SD25274, SD25288 NOTE Consult Power Electronics in case of additional requirements. D W 30 H MODEL 1 (IP00) MODEL 2 (IP20) LOW VOLTAGE / POWER ELECTRONICS