Retrieve the Network Configuration of the System Manager Attached to Your Server From an IBM i Command Line

Transcription

1 Retrieve the Network Configuration of the System Manager Attached to Your Server From an IBM i Command Line The following program demonstrates how to use the new selection value X'0206' of the MATMATR instruction to retrieve the machine type/model/serial number plus the TCP/IP configuration of every HMC or SM that is connected to the server BEGIN PGM VAR(&MATMATR) TYPE(*CHAR) LEN(10516) VAR(&BYTESIN) TYPE(*CHAR) STG(*DEFINED) + LEN(4) DEFVAR(&MATMATR) VAR(&BYTESOUT) TYPE(*CHAR) STG(*DEFINED) + LEN(4) DEFVAR(&MATMATR 5) VAR(&ENTRIES) TYPE(*CHAR) STG(*DEFINED) + LEN(4) DEFVAR(&MATMATR 9) VAR(&SMTYPE) TYPE(*CHAR) LEN(2) VAR(&SMINFLEN) TYPE(*CHAR) LEN(2) VAR(&SMDTALEN) TYPE(*CHAR) LEN(2) VAR(&SMDTAUTF8) TYPE(*CHAR) LEN(1034) VAR(&SMDTAASCII) TYPE(*CHAR) LEN(1034) VAR(&SMT) TYPE(*CHAR) LEN(6) VAR(&SMSTATUS) TYPE(*CHAR) LEN(10400) VAR(&RCVR) TYPE(*CHAR) LEN(22) VAR(&RCVRLEN) TYPE(*CHAR) LEN(4) + VALUE(X' ') VAR(&FORMAT) TYPE(*CHAR) LEN(8) + VALUE('PRDR0700') VAR(&PRDINFO) TYPE(*CHAR) LEN(27) + VALUE('*OPSYS *CUR 0000*CODE ') VAR(&EC) TYPE(*CHAR) LEN(8) + VALUE(X' ') VAR(&COUNT) TYPE(*DEC) LEN(4) VAR(&START) TYPE(*DEC) LEN(4) VAR(&END) TYPE(*DEC) LEN(4) VAR(&SIZE) TYPE(*CHAR) LEN(4) VAR(&ERROR) TYPE(*LGL) VALUE('0') VAR(&TYPE) TYPE(*CHAR) LEN(1) VAR(&CCSID1) TYPE(*INT) LEN(4) VALUE(1208) VAR(&ST1) TYPE(*INT) LEN(4) VALUE(1) VAR(&L1) TYPE(*INT) LEN(4) VALUE(1034) VAR(&CCSID2) TYPE(*INT) LEN(4) VAR(&ST2) TYPE(*INT) LEN(4) VALUE(2) VAR(&GCCASN) TYPE(*INT) LEN(4) VALUE(0) Retrieve the Network Configuration of the System Manager Attached to Your Server From an IBM i Command Line 1

2 GETSMDTA VAR(&L2) TYPE(*INT) LEN(4) VALUE(1034) VAR(&L3) TYPE(*INT) LEN(4) VALUE(0) VAR(&L4) TYPE(*INT) LEN(4) VALUE(0) VAR(&FB) TYPE(*CHAR) LEN(12) VAR(&CCSID) TYPE(*DEC) LEN(5 0) VAR(&DFTCCSID) TYPE(*DEC) LEN(5 0) VAR(&MSGID) TYPE(*CHAR) LEN(7) VALUE('CPF9898') VAR(&MSGF) TYPE(*CHAR) LEN(10) VALUE('QCPFMSG') VAR(&MSGFLIB) TYPE(*CHAR) LEN(10) + VALUE('*LIBL') VAR(&MSGDTA) TYPE(*CHAR) LEN(512) VAR(&MSGTYPE) TYPE(*CHAR) LEN(10) + VALUE('*COMP') MONMSG MSGID(CPC0000 CPD0000 CPF0000 MCH0000) + EXEC(GOTO CMDLBL(ERROR)) CALL PGM(QSYS/QSZRTVPR) PARM(&RCVR &RCVRLEN + &FORMAT &PRDINFO &EC) IF COND(%SST(&RCVR 17 6) < 'V6R1M0') THEN(DO) CHGVAR VAR(&MSGDTA) VALUE('This tool requires IBM i + V6R1 at minimum') GOTO CMDLBL(END) ENDDO CHGVAR VAR(%BIN(&BYTESIN)) VALUE(10516) CALLPRC PRC('_MATMATR1') PARM((&MATMATR *BYREF) + (X'0206' *BYREF)) IF COND(%BIN(&ENTRIES) > 0) THEN(DO) CHGVAR VAR(&START) VALUE(17) CHGVAR VAR(&COUNT) VALUE(&COUNT + 1) CHGVAR VAR(%BIN(&SIZE)) VALUE(%BIN(&ENTRIES) * 6) CHGVAR VAR(&SMTYPE) VALUE(%SST(&MATMATR &START 2)) CHGVAR VAR(&START) VALUE(&START + 2) CHGVAR VAR(&SMINFLEN) VALUE(%SST(&MATMATR &START 2)) CHGVAR VAR(&START) VALUE(&START + 2) CHGVAR VAR(&SMDTALEN) VALUE(%SST(&MATMATR &START 2)) CHGVAR VAR(&L1) VALUE(%BIN(&SMDTALEN)) CHGVAR VAR(%BIN(&SIZE)) VALUE(%BIN(&SIZE) + + %BIN(&SMDTALEN)) CHGVAR VAR(&START) VALUE(&START + 12) CHGVAR VAR(&END) VALUE(&START + %BIN(&SMDTALEN)) CHGVAR VAR(&SMDTAUTF8) VALUE(%SST(&MATMATR &START + &END)) RTVJOBA TYPE(&TYPE) CCSID(&CCSID) DFTCCSID(&DFTCCSID) IF COND(&CCSID *EQ 65535) THEN(CHGVAR + VAR(&CCSID2) VALUE(&DFTCCSID)) ELSE CMD(CHGVAR VAR(&CCSID2) VALUE(&CCSID)) CALL PGM(QTQCVRT) PARM(&CCSID1 &ST1 &SMDTAUTF8 + &L1 &CCSID2 &ST2 &GCCASN &L2 &SMDTAASCII + &L3 &L4 &FB) SELECT WHEN COND(%BIN(&SMTYPE) = 1) THEN(CHGVAR + VAR(&SMT) VALUE('{HMC}')) WHEN COND(%BIN(&SMTYPE) = 2) THEN(CHGVAR + VAR(&SMT) VALUE('{IVM}')) WHEN COND(%BIN(&SMTYPE) = 3) THEN(CHGVAR + Retrieve the Network Configuration of the System Manager Attached to Your Server From an IBM i Command Line 2

3 VAR(&SMT) VALUE('{VPM}')) OTHERWISE CMD(CHGVAR VAR(&SMT) VALUE('{N/A}')) ENDSELECT CHGVAR VAR(&SMSTATUS) VALUE(&SMSTATUS < &SMT < + &SMDTAASCII) IF COND(&COUNT = %BIN(&ENTRIES)) THEN(DO) CHGVAR VAR(&ENTRIES) VALUE(%BIN(&ENTRIES)) CHGVAR VAR(&MSGDTA) VALUE('System Managers + (HMC/SDMC, IVM, VPM) ' &ENTRIES) GOTO CMDLBL(END) ENDDO CHGVAR VAR(&START) VALUE(&START + %BIN(&SMINFLEN) ) CHGVAR VAR(&COUNT) VALUE(&COUNT + 1) GOTO CMDLBL(GETSMDTA) ENDDO CHGVAR VAR(%BIN(&SIZE)) VALUE(29) CHGVAR VAR(&SMSTATUS) VALUE('This is a non-managed + Server.') CHGVAR VAR(&ENTRIES) VALUE(%BIN(&ENTRIES)) CHGVAR VAR(&MSGDTA) VALUE('This is a non-managed + Server') GOTO CMDLBL(END) ERROR RCVMSG MSGTYPE(*EXCP) RMV(*YES) MSGDTA(&MSGDTA) + MSGID(&MSGID) MSGF(&MSGF) MSGFLIB(&MSGFLIB) CHGVAR VAR(&MSGTYPE) VALUE('*ESCAPE') CHGVAR VAR(&ERROR) VALUE('1') END IF COND(&TYPE = '1' & &ERROR = '1') THEN(CALL + PGM(QUILNGTX) PARM(&SMSTATUS &SIZE + 'CPF9898' 'QCPFMSG *LIBL ' + X' ')) SNDPGMMSG MSGID(&MSGID) MSGF(&MSGFLIB/&MSGF) + MSGDTA(&MSGDTA) MSGTYPE(&MSGTYPE) ENDPGM Putting it to work Follow these instructions from an IBM i command line STRSEU SRCFILE(QGPL/QCLSRC) SRCMBR(DSPSMDTA) TYPE(CLLE) OPTION(2) TEXT('Display System Manager Data') Paste the CLP code example for program STRWSEM and save the member CRTBN PGM(QGPL/DSPSMDTA) SRCFILE(QGPL/QCLSRC) OUTPUT(*NONE) USRPRF(*OWNER) LOG(*NO) ALWRTVSRC(*NO) REPLACE(*YES) How it works The program DSPSMDTA uses the ILE builtin _MATMATR1 (MATMATR MI instruction) to retrieve the TCP/IP configuration of the machine type/model/serial number plus the TCP/IP configuration of every HMC or SM that is connected to the server where the program is run. It lets you know the current network configuration of every System Manager that is currently acknowledged by your server. The System Manager data is returned as a string containing a set of keywords with information about the Retrieve the Network Configuration of the System Manager Attached to Your Server From an IBM i Command Line 3

4 SM. The System Manager data that is returned is the same for all partitions of a physical machine. The type of System Manager is included at the beginning of the string HMC Hardware Management Console or Systems Director Management Console IVM Integrated Virtualization Manager VPM Virtual Partition Manager N/A Not available For example, a System Manager data string can look like this {HMC}HmcStat=1;HscName=7310C05*10A8C9A;HscHostName=w1212b;HscIPAddr = ; HscAddIPs=;HMCAddIPv6s=fe eeffe933e62; System Manager data keywords are HscName System manager name HscIPAddr IP address of system manager's LAN connection to the partition HscHostName System manager host name HscAddIPs Additional IP addresses HmcStat System manager connection state HMCAddIPv6s Additional V6 IP addresses The values of system manager connection state can be 1 The system manager is connected. 2 The system manager is temporarily disconnected. 3 The system manager is temporarily disconnected. 4 The system manager is not communicating. Retrieve the Network Configuration of the System Manager Attached to Your Server From an IBM i Command Line 4

5 Figure 1 shows an example of what you get after the program completes. MAIN XXXXXXXX Select one of the following IBM i Main Menu System..... {HMC}HmcStat=1;HscName=7042CR5*100127C;HscHostName=hmc770;HscIPAddr = ;HscAddIPs= ;HMCAddIPv6s=;{HMC}HmcStat=4;HscName =V107-f6a*0f4c5cb;HscHostName=ivm2sdmc;HscIPAddr= ;HscAddIPs =;HMCAddIPv6s=; Bottom F12=Cancel Sign off Selection or command ===> call qgpl/dspsmdta F3=Exit F4=Prompt F9=Retrieve F12=Cancel F13=Information Assistant F23=Set initial menu Figure 1. Example of what you will see when program completes. After you press the Enter the following completion message displays System Managers (HMC/SDMC, IVM, VPM) Retrieve the Network Configuration of the System Manager Attached to Your Server From an IBM i Command Line 5

6 For further information about MATMATR MI instructions and the Machine Interace in general, see the IBM i 7.1 Information Center at the following web pages Materialize Machine Attributes (MATMATR) http//publib.boulder.ibm.com/infocenter/iseries/v7r1m0/topic/rzatk/matmatr.htm Machine interface programming http//publib.boulder.ibm.com/infocenter/iseries/v7r1m0/topic/apiref/mipgmg.htm IBM i Machine Interface http//publib.boulder.ibm.com/infocenter/iseries/v7r1m0/topic/rzatk/mitoc.htm Retrieve the Network Configuration of the System Manager Attached to Your Server From an IBM i Command Line 6

7 Notices This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-ibm product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to IBM Director of Licensing, IBM Corporation, North Castle Drive, Armonk, NY U.S.A. The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. Any references in this information to non-ibm Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk.ibm may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Information concerning non-ibm products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-ibm products. Questions on the capabilities of non-ibm products should be addressed to the suppliers of those products. This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. Any performance data contained herein was determined in a controlled environment. Therefore, the results obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurement may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. COPYRIGHT LICENSE This information contains sample application programs in source language, which illustrate programming techniques on various operating platforms. You may copy, modify, and distribute these sample programs in any form without payment to IBM, for the purposes of developing, using, marketing or distributing application programs conforming to the application programming interface for the operating platform for which the sample programs are written. These examples have not been thoroughly tested under all conditions. IBM, therefore, cannot guarantee or imply reliability, serviceability, or function of these programs. Copyright International Business Machines Corporation All rights reserved. Note to U.S. Government Users Restricted Rights -- Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Retrieve the Network Configuration of the System Manager Attached to Your Server From an IBM i Command Line 7

8 This document was created or updated on October 6, Send us your comments in one of the following ways Use the online Contact us review form found at ibm.com/redbooks Send your comments in an to Mail your comments to IBM Corporation, International Technical Support Organization Dept. HYTD Mail Station P South Road Poughkeepsie, NY U.S.A. This document is available online at http// Trademarks IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corporation in the United States, other countries, or both. These and other IBM trademarked terms are marked on their first occurrence in this information with the appropriate symbol ( or ), indicating US registered or common law trademarks owned by IBM at the time this information was published. Such trademarks may also be registered or common law trademarks in other countries. A current list of IBM trademarks is available on the Web at The following terms are trademarks of the International Business Machines Corporation in the United States, other countries, or both AS/400 IBM iseries Power Systems Redbooks (logo) System i The following terms are trademarks of other companies Intel, Intel logo, Intel Inside, Intel Inside logo, Intel Centrino, Intel Centrino logo, Celeron, Intel Xeon, Intel SpeedStep, Itanium, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Other company, product, or service names may be trademarks or service marks of others. Retrieve the Network Configuration of the System Manager Attached to Your Server From an IBM i Command Line 8