Executing Remote Static Checks in Context of HANA Migration

Transcription

1 Executing Remote Static Checks in Context of HANA Migration NOTE This topic does not address the common usage of remote static checks in the Code Inspector. It focuses rather on static checks that are relevant in the context of HANA migration. Usage Scenario Let s imagine that you, as an SAP customer, are faced with the following situation: Within your system landscape, you have access to an SAP system with SAP NetWeaver Release 7.40, SP8 (or higher). You also have older systems (7.00, 7.01, 7.02 or 7.31) with their own custom code base. An upgrade of these systems is not planned so far. However, you would like to execute the latest static checks for your custom code and thus benefit from recent check variants in the Code Inspector tool. For this type of scenario, the remote static check might be a best solution for you. SAP Customer Source System (SAP NW 7.00) Test System (>= SAP NW 7.40, SP8 ) RFC A Code Inspector (SCI) Remote Object Z* code Code Information Extract Download Upload B Local PC Zip File(s) Figure: Executing remote static checks

2 The figure above outlines the components involved and the activities required for the execution of static code inspections based on the current check variants within a test system (AS ABAP 740, SP8 or higher). The source system (AS ABAP 7.00, 7.01, 7.02, or 7.31) includes the custom code (ABAP programs or other development objects) to be checked. The corresponding program data is extracted by means of an extractor utility (ABAP program) from the system and made available, either directly through RFC (A), or by means of a download to your local machine as a set of zip files (B). For the second use case (B), the remote custom code is available as a code information extract in the test system with the help of an upload utility. In the Code Inspector of the test system, the new object set is finally created in the form of a remote object. Target Audience AS ABAP system administrators ABAP developers Prerequisites To perform the download or upload of a code information extract, the display authorization profile for object S_DEVELOP (activity: 03) in the corresponding SAP systems is required as a minimum. You have executed the correction instructions according to SAP NOTE (SAP note for importing the extractor for execution of static checks in remote system). If you decide to use the RFC option for the data export, the communication using RFC is set up correctly (RFC destination for the test system and the users for RFC communications are created). Developer-Relevant Activities a. Preparing data export from the source system b. Downloading data from the source system Non-RFC option c. Uploading data into the test system Non-RFC option d. Executing checks in the test system e. Deleting data Preparing Data Export from the Source System Procedure 1. To initialize the code extractor in your source system ( ), execute the ABAP program RS_ABAP_INIT_ANALYSIS.

3 Figure: Initializing the code extractor in the source system 2. In the initial screen that appears, leave the predefined entries unchanged and choose the Execute icon or press F8. The ABAP program creates several database tables that are required to store the code extract information. 3. In your source system ( ), launch the Code Inspector using the transaction SCI. 4. Create a new object set (programs and other development objects) that comprises the custom code to be checked. See also: Creating and Processing a Set of Objects 5. Create a new check variant. See also: Creating and Processing a Check Variant a. From the list of available checks, select the Export of Program Information check. b. Enter a value for the call level. REMEMBER: Using the call level parameter, you specify the procedure call depth of a program. With the value = 0, for example, you specify that no calls (call method, call function,..) within the program will be considered by the check. With the value = 1, you specify that called programs, too, will be considered by the check. You can derive the appropriate call level value from the maximum level specified by the individual checks in the test system. In particular, the check variant PERFORMANCE_DB contains one SQL performance check with level = 3. Therefore, we recommend value = 3 for the call level when using the PERFORMANCE_DB check variant. Otherwise, you might be faced with a huge number of messages after the check run in the test system that inform you that required data is missing. When using the check variant FUNCTIONAL_DB, we recommend value = 2 for the call level. As an alternative to downloading to a local file, you can use the Export via RFC option. This enables you to analyze data that is exported, using RFC, into the system that is specified by use of an RFC destination.

4 Figure: Specifying a check variant when using the file download option for data export Figure: Specifying a check variant when using the RFC option for data export 6. Create a new inspection and assign the object set and the check variant created in the steps above. See also: Creating Code Inspections 7. Choose Execute or Execute...to execute the Code Inspector check for your object set and the check variant selected. Results The Code Inspector performs the inspection run, converts the source code of the selected ABAP programs into an appropriate format, and stores it in several database tables in the source system.

5 When the Export via RFC option is used, it also transfers the resulting code extract to the remote test system that you specified for the RFC destination. Downloading Data from the Source System This activity is not relevant for you if you use the RFC option for exporting the program information from the source into the test system. Prerequisites The program information has been successfully exported into the database tables for all programs or other development objects included in the object set. Procedure 8. In your source system ( ), execute the ABAP program RS_ABAP_DOWNLOAD_ANALYSIS. 9. In the initial screen of the download program, enter the data for selection. Specify the same object set and the call level as before (see also: Preparing the Data Download from the Source System).

6 Figure: Running the download program 10. Choose Execute or press F Select the download location for the zip file(s) to be generated. Results After you have accepted the statement for the disclaimer displayed on the final dialog window, the download program creates a new subfolder <Analyisis_SystemID_Date_Time> on your local drive. It contains one or multiple zip files that include the code information extract of all selected programs or other development objects. Uploading Data into the Test System This activity is not relevant for you if you use the RFC option for exporting the program information from the source into the test system. You will now upload the code information that is stored on your local drive as a set of zip files into the test system (7.40).

7 Prerequisites The program information for the relevant programs has been successfully downloaded to your local drive. Procedure 1. In your target system, execute the ABAP program RS_ABAP_UPLOAD_ANALYSIS. 2. Select all zip files from your download location and choose Open. Results The upload program imports the program information into the test system. Figure: The system informs you when the upload is completed You can now apply the latest Code Inspector checks to the program code that has originated from the remote system ( ). Executing Checks in the Test System Prerequisites The code information extract from the remote source system has been successfully exported (RFC option) or uploaded into your test system. Procedure 1. In your test system, launch the Code Inspector (transaction SCI). 2. Create a new object set based on the code information extract from the remote source system. a. On the Object Set screen, click the Object Collectors tab. b. Use F4 value help for the Object Collector field.

8 Figure: Selecting the object collector Remote Objects c. In the next screen, click the Select Source Extract button. d. Select the relevant entry in the list that appears and choose Continue. Figure: Selecting the RFC extract when using the RFC option Note that for each individual source system, only a single entry for the RFC extract is created in the target system. For each subsequent export from the same source system using the RFC option, the additional program data is accumulated in the existing RFC extract. Figure: Selecting the remote object entry when using the upload option

9 e. In the next screen, leave the other filter settings unchanged and choose Execute or press F8 to create the object set. Figure: Remote Objects in the Code Inspector tool f. Use the object collector filter to specify the same object set you selected for export from the source system. See also: Preparing Data Export from the Source System Results Using this object set, you can now assign the check variant of your choice to the inspection and then execute the Code Inspector checks. See also: ABAP Test Cockpit and Code Inspector in the Context of HANA Migration

10 Figure: Executing static checks for remote custom ABAP code based on the check variant FUNCTIONAL_DB Deleting Data Assume that you have completed the analysis of your static checks. Both the extracted code information in your source system and the imported data in the test system are no longer needed and can now be deleted. In the source system (7.00), call the ABAP program RS_ABAP_DELETE_ANALYSIS to delete all data that you extracted for export or download as code information extract. In the test system (7.40), call the ABAP program RS_ABAP_DELETE_REMOTE_DATA to delete all data originating from the remote system.