Parallelism and Concurrency. Motivation, Challenges, Impact on Software Development CSE 110 Winter 2016

Transcription

1 Parallelism and Concurrency Motivation, Challenges, Impact on Software Development CSE 110 Winter 2016

2 About These Slides Due to the nature of this material, this lecture was delivered via the chalkboard. Every was advised that slides would not be available and that notes should be taken. These slides aren t designed to capture the discussion, just to provide some bullet points.

3 Parallelism vs Concurrency Parallelism: Running at the same time upon parallel resources Concurrency: Running at the same time, whether via parallelism or by turntaking, e.g. interleaved scheduling.

4 Parallelism Wasn t very prevalent until recently. Multi-processor systems were prevalent for servers and in scientific computing But, they weren t commonly used by end user devices, e.g. personal computers, etc. For many years, clock speed was the de facto measure of system performance and increased rapidly. In the mid-2000s we hit the end of Moore s law in some ways. Transistors became less limiting than connections Hot spots. Density limits

5 Multi-Core Became Standard Many cores on same die Many smaller chips less compolex than one big one Out of the box gains from multitasking different tasks on different cores Better for power management. Easier to save energy by turning off a core than by slowing one down Gains can be had by slowing down tractor-trailers. But, idling a tractor-trailer takes more energy than idling a car. Essentially the same idea Workstations, personal computer, phones, tablets, etc.

6 Bigger Gains When Software is Aware Imagine one huge task: Game, CAD, simulation, rendering, etc Not helped by multiple cores if it can only run on one at a time Modern world requires threading: Dividing big tasks into independent parts that can run at the same time on different core. Thread for each player in game, thread for scene, thread for communications, etc. This is as true on a high-performance workstation as phone.

7 Classic Concurrency Problem: Lost Update (0) x=0 (5,6) x=1 Memory (1)%eax=0 (4)%eax=1 (2) %eax=0 (3) %eax=1 Per-Thread Registers // x++ (1) mov addr,%eax (4) inc %eax (5) mov %eax, addr // x++ (2) mov addr,%eax (3) inc %eax (6) mov %eax, addr Code

8 Concurrency Problems Can occur as the result of actual parallelism Can occur just by interleaved execution Need a sharing discipline In other words, all interacting code needs to play nice with others

9 Critical Resources, Critical Sections Critical Resources: Shared resources, whether hardware or abstract, that can t naturally be shared in the intended way Toilets can t be shared. Variables can t be shared if written Sound can be shared. Air can be shared. Variables can be shared if only read. Critical Sections (of code): The code that manipulates the critical resources. This is the code that needs to be disciplined Common technique is some form of locking

10 One Classic Concurrency Solution: Some Form of Locking (0) x=0 (4) x=0 (9) x=1 Memory (1)%eax=0 (3)%eax=1 (6) %eax=1 (8) %eax=1 Per-Thread Registers // x++ (1) lock_aquire(x_lock) (2) mov addr,%eax (3) inc %eax (4) mov %eax, addr (5) loc_release(x_lock) // x++ (6) lock_aquire(x_lock) (7) mov addr,%eax (8) inc %eax (9) mov %eax, addr (10) loc_release(x_lock) Code

11 Concurrency Control Primitives You ll learn more in CSE 120 and/or CSE 160 Semaphores Mutexes Condition variables Etc

12 Higher-Level Constructs Monitor: A higher-level synchronization abstraction: Put related critical resources into a box, i.e. monitor. Only allow them to be accesses by the monitor s entry methods The abstraction is implemented using lower-level primitives to ensure that only one entry method can be active within the monitor at the same time Slightly different semantics are possible when complications, such as blocking (needing to wait for a resource outside of the monitor), are considered, e.g. Mesa semantics, Hoare semantics, etc. This level of detail is for another class.

13 Monitors In Java: Synchronized Methods Essentially turns an instance into a monitor Only one synchronized method can be active upon the instance at a time Just add synchronized qualifier to method that you want to discipline, e.g. synchronized void increment() Still things to watch Constructors cannot be synchronized Unsynchronized methods Also note: Java has many, many more ways of supporting concurrency control: Out of scope for this class

14 Properties of Good Solutions Mutual Exclusion: In many cases, critical resources can not be shared at all. In these cases we want to have mutual exclusion, i.e. the situation where the use by one thread of the critical resource excludes use by the other threads. In some cases, other policies, such as At Most N are appropriate, e.g. only N buffers exist. In these cases, we want to ensure whatever the constraint happens to be. Progress: If the critical resource is available, and a thread wants to use it, it should be able to do that. We don t want a situation where no one can use it Bounded Wait: It is often desirable to ensure that every thread will eventually get a turn. This is called bounded wait. This isn t always desirable, though. In some cases, we want a strict priority system, in which case, if there isn t enough resource time, some threads will starve. But, at the least, the more important things got done.

15 Deadlock: 4 Necessary and Sufficient Conditions Necessary: Deadlock can not occur without any one of these Sufficient: Deadlock will necessarily occur if all of these are true. The Necessary and Sufficient conditions for deadlock: Unsharable resource: If the resource can be shared, there is no reason to wait for it. Hold and wait : It is possible to hold some resources (denying them to other threads), while waiting for other resources, potentially held by other threads Circular wait: The hold and wait forms a cycle, so that it can never be resolved. No pre-emption: No way to take resources from thread holding them to break cycle.

16 Chopstick Example I have the left chopstick and need the right chopstick You have the right chopstick and need the left chopstick We both starve.

17 Deadlock Detection It is possible, but really involved and really intensive Once detected, there are usually no good options Can t really reach into code logic and change it Only real option is usually killing a thread, freeing its resources, breaking the cycle

18 Avoiding Deadlock Unsharable resource: We can t usually change the nature of the resource. Toilets aren t, for example, sharable Hold and wait: We might be able to require that all resources be allocated at once. But, this is very limiting. Consider branching in code. It would take resources off-line that would never be used, etc. We d also need to deal with contention for the basket. No-Premeption: We could do deadlock detection and then kill off one of the threads within a cycle. But, this can waste a lot of work (and annoy whoever the thread was serving) Circular wait: This is the one we usually manage. If we request resources in the same order, and there is no cycle in our ordering, there can be no circular dependency. It is more limiting than allowing resources to be requested in arbitrary order, but much more flexible than an all-at-once policy.

19 Chopstick Example: Fixed Everyone agrees to get left chopstick before right chopstick Now, whoever gets the left chopstick can get the right chopstick Whoever doesn t get the left chopstick will wait The user of the two chopsticks will finish, releasing them for later

20 Last Word Concurrent programming, once the domain only of those working in scientific computing, is now the domain of almost every programmer. It is important to explore and learn Some challenges and solutions can be really complex But, most situations are relatively straight-forward