QARun Installation and Configuration Guide. Release 4.8

Size: px
Start display at page:

Download "QARun Installation and Configuration Guide. Release 4.8"

Transcription

1 QARun Installation and Configuration Guide Release 4.8

2 Technical support is available from our Technical Support Hotline or via our FrontLine Support web site. Technical Support Hotline: FrontLine Support Web Site: This document and the product referenced in it are subject to the following legends: Access is limited to authorized users.use of this product is subject to the terms and conditions of the user s License Agreement with Compuware Corporation Compuware Corporation. All rights reserved. Unpublished - rights reserved under the Copyright Laws of the United States. U.S. GOVERNMENT RIGHTS Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in Compuware Corporation license agreement and as provided in DFARS (a) and (a) (1995), DFARS (c)(1)(ii)(OCT 1988), FAR (a) (1995), FAR , or FAR (ALT III), as applicable.compuware Corporation. This product contains confidential information and trade secrets of Compuware Corporation.Use, disclosure, or reproduction is prohibited without the prior express written permission of Compuware Corporation. Compuware, ActiveAnalysis, ActiveData, <QA>QA<EQA>Center, <QA>QA<EQA>Director, <QA>QA<EQA>Load, <QA>QA<EQA>Run, Reconcile, TestPartner, TrackRecord, and WebCheck are trademarks or registered trademarks of Compuware Corporation. Acrobat Reader copyright Adobe Systems Incorporated. All rights reserved. Adobe, Acrobat, and Acrobat Reader are trademarks of Adobe Systems Incorporated. All other company or product names are trademarks of their respective owners. Doc. CWQCIXX4K March 7, 2003

3 BETA REVIEW Table of Contents Introduction Who Should Read This Guide Related Publications World Wide Web Information Getting Help Chapter 1 Getting Started Overview of QACenter Installation Types Before Installation Chapter 2 Installing QARun System Requirements Installing QARun Starting QARun and Connecting to a Database Starting QARun and Connecting to a Microsoft Access Database Setting Up QARun To Connect to an ODBC Database Changing Database Maintenance Utility s Administrator Password Chapter 3 Maintaining the Installation Accessing Maintenance Mode Modifying an Installation Repairing an Installation

4 BETA REVIEW Removing a Product Index 4 QACenter Installation and Configuration Guide

5 . Introduction Who Should Read This Guide Related Publications World Wide Web Information Getting Help Who Should Read This Guide This guide is intended for administrators who are installing QACenter products; it does not contain reference or usage information. You can find that information in your product s online help facility and documentation set. Compuware assumes that you are familiar with basic Microsoft Windows navigation. If this is not the case, familiarize yourself with the documentation for Microsoft Windows before reading this guide. Related Publications The QACenter installation documentation set includes: The QACenter Installation and Configuration Guide, which contains system requirements and instructions for installing QACenter products. The License Installation Guide, which contains instructions for licensing your QACenter product. All of these books are provided in PDF format only. You can access the online versions of these books from the installation bookshelf (as described below) or from Compuware s FrontLine technical support Web site at 5

6 Viewing and Printing Online Books To access these online books: 1 Insert the QACenter CD into the CD-ROM drive. If the CD browser does not automatically start, navigate to the CD s root directory and run setup.exe. 2 Click View QACenter Documentation. The documentation bookshelf opens in Acrobat Reader. (If necessary, Acrobat Reader can be installed from the QACenter CD by clicking Install 3rd Party Software, then clicking Install Adobe Acrobat Reader.) 3 From the bookshelf, select the installation guide that you wish to view. Because PDF is based on PostScript, a PostScript printer is the most reliable way to print online books. In most cases, you can also print PDF files to PCL printers. If you cannot print the PDF files to your printer, refer to Adobe s Web site at for troubleshooting information. World Wide Web Information To access Compuware Corporation s site on the World Wide Web, point your browser at The Compuware site provides a variety of product and support information. FrontLine Support Web Site: You can access online technical support for Compuware products via the FrontLine support web site. FrontLine provides fast access to critical information about your QACenter product. You can read or download documentation, frequently asked questions, and product fixes, or your questions or comments. To access FrontLine, follow these steps: 1 Open a web browser and go to: The Welcome to FrontLine page appears. 2 On the right side of the page, enter your login ID and password and click the Login button. Note: If you are a first-time visitor, click the Register button to receive your free password to access FrontLine. After you complete the registration form, your login ID and password will be ed to you and your account will be activated. 3 From the drop-down list in the center of the page, select a product and click the Go button. You will see the product s FrontLine home 6 QACenter Installation and Configuration Guide

7 page, where you can access documentation, technical information, fixes, and other support items. Getting Help At Compuware, we strive to make our products and documentation the best in the industry. Feedback from our customers helps us maintain our quality standards. If you need support services, please obtain the following information before calling Compuware s 24-hour product support hotline: The name, release (version), and build number of the QACenter product. This information is displayed when you select the About command from your product s Help menu. The name and release are also on the covers of the product documentation. Installation information, including installed options, whether the product uses local or network databases, whether it is installed in the default directories, whether it is a standalone or network installation, and whether it is a client or server installation. Environment information, such as the operating system and release on which the product is installed, memory, hardware/network specifications, and the names and releases of other applications that were running. The location of the problem in the QACenter product software, and the actions taken before the problem occurred. The exact product error message, if any. The exact application, licensing, or operating system error messages, if any. Your Compuware client, office, or site number, if available Compuware Technical Support Compuware Corporation Northwestern Highway Farmington Hills, MI Introduction 7

8 8 QACenter Installation and Configuration Guide

9 Chapter 1 Getting Started Overview of QACenter Installation Types Before Installation Overview of QACenter QACenter is a suite of automated software quality products for enterprise and e-business applications. QACenter offers a comprehensive solution for IT organizations concerned with assuring quality and performance, while keeping pace with faster development cycles. QACenter includes: Compuware Central: An HTML-based component that provides a Web framework for managing and performing testing efforts from the beginning to the end of a project. Compuware Central supports a complete, seamless testing process from requirements management to test execution to results analysis and defect tracking. Because it is Web-based, Compuware Central supports remote testing for those organizations whose testing and development teams are not in the same geographic location. Compuware Central s flexibility allows small to large companies to customize it according to their needs. QADirector: Coordinates the entire testing process by organizing, tracking, and executing automated and manual tests. QADirector integrates with Compuware s testing, program analysis, defect tracking, and requirements management tools. QAHiperstation+: Works with mainframe QAHiperstation to test hostbased applications directly from your Windows desktop. This integrated, workstation-based interface tool uses 32-bit code that provides improved performance and better stability on 32-bit Windows platforms. 9

10 QARun: Tests enterprise client/server applications. QARun creates and runs test scripts that support a wide variety of development tools and the diverse components of today's corporate environments. QARun couples advanced verification facilities with error-recovery mechanisms to reliably test local and remote applications. Reconcile: Helps create and control project requirements. It stores the project requirements in a relational database. You can view the requirements through Microsoft Word, a reporting view (grid), and the Web. Reconcile is fully integrated with QADirector and TrackRecord. Working together, these products help you manage project development from conception through delivery. TestPartner: Tests Web- and Windows-based applications that use Microsoft technologies. You can record user sessions with the application, add validation functions, and replay the sessions later to ensure that the application works as expected. TestPartner s scripting language is Visual Basic for Applications (VBA); it supports testing of Java, Visual Basic, and Visual C++ applications; browser-based Web applications; and COM components including both ActiveX controls and automation objects. TrackRecord: Records and reports information about products being developed or supported. Information on team members, testers, schedules, and defect reports is recorded in an object-oriented database; it can be retrieved using TrackRecord's query and reporting features. WebCheck: Checks the quality of even the largest web sites. WebCheck automatically scans a web site for more than 50 potential types of problems and provides 19 HTML reports. WebCheck is integrated with QARun and QADirector and can be used as a stand-alone product. In addition to the QACenter suite of products, the QACenter CD includes Adobe Acrobat Reader, Microsoft Internet Explorer, Java 2 Runtime Environment, and Microsoft Virtual Machine installation programs. To install one or more of these products from the QACenter CD, click Install 3rd Party Software, then click on the product installation you would like to perform. Installation Types Before you begin, determine the type of installation you need to perform: Initial Installation: An initial installation is the first-time installation of a product on your computer. See the installation chapter for each product for instructions. 10 QACenter Installation and Configuration Guide

11 Modify: A modification of the product installation occurs when you add or remove one or more of a product s components, but not all of them. See the maintenance chapter for instructions. Repair: A repair installation may be necessary due to a corruption of a program or the inadvertent deletion of the product. See the maintenance chapter for instructions. Remove: A remove or uninstallation removes all the components of a product. See the maintenance chapter for instructions. Upgrade: Normally, an upgrade to a new release of a product does not require that you uninstall the current release first. If there are special concerns with regard to upgrading a QACenter product, they are explained in the product s installation chapter. Before Installation Before installing any QACenter product, you should carefully review the following information: System Requirements Review the system requirements to ensure that you meet the prerequisites for the successful installation and operation of the product. System requirements are listed in the Release Notes as well as in this book. Release Notes Review the Release Notes for information about new features, technical notes, and known issues that may enhance or impact your product s performance. Release Notes contain recent changes that may not be included in your QACenter product documentation. Release Notes can be viewed from the QACenter CD or on FrontLine, Compuware s product support web site. The Release Notes on FrontLine are periodically updated as new information becomes available. To access the Release Notes from the QACenter CD, follow these steps: 1 Insert the QACenter CD into the CD-ROM drive. If the CD browser does not start automatically, navigate to the CD s root directory and run setup.exe. 2 Click View Release Notes. The Release Notes open in your default web browser. 3 Read the Release Notes online, or print the document. Chapter 1 Getting Started 11

12 4 After reading and/or printing the Release Notes, close the document to return to the CD browser. To access the Release Notes on FrontLine, follow these steps: 1 Open a web browser and go to: The Welcome to FrontLine page appears. 2 On the right side of the page, enter your login ID and password and click the Login button. Note: If you are a first-time visitor, click the Register button to receive your free password to access FrontLine. After you complete the registration form, your login ID and password will be ed to you and your account will be activated. 3 From the drop-down list in the center of the page, select a product and click the Go button. You will see the product s FrontLine home page. 4 On the left side of the product s homepage, select the Documentation link. You will see the product s documentation page, which includes links to Release Notes and other documentation types. 5 Click the HTML or PDF icons to view documents. 12 QACenter Installation and Configuration Guide

13 Chapter 2 Installing QARun System Requirements Installing QARun Starting QARun and Connecting to a Database System Requirements QARun has the following minimum system requirements: Mid-level Pentium III PC with 256 MB of RAM. Minimum of 120 MB of available disk space, maximum of 200MB. Microsoft Windows 98 SE, Windows 2000, Windows XP, or Windows NT 4.0 Workstation/Server with Service Pack 5 or Service Pack 6a. Display with a color depth set to greater than 256 colors. (required for bitmap checks) Microsoft Internet Explorer 4.01 with Service Pack 2 (build ) or later. You can install Internet Explorer from the QACenter CD, or allow QARun to install a minimal version. Netscape Navigator , and Netscape Communicator 4.5, 4.6, and 4.7. For the QARun repository you can use a Microsoft Access 2000 database (supplied with QARun), Oracle and 8.1.7, or SQL Server 7.0 and SQL Server 2000 support requires Service Pack 2. Microsoft Virtual Machine build 3167 (provided on the QACenter CD) or later to test Microsoft Java applications. Adobe Acrobat or Acrobat Reader (provided on the QACenter CD) to view the online books in PDF format. Administrative Rights Installing and Using QARun requires full administrative rights. 13

14 Installing QARun 14 QACenter Installation and Configuration Guide This section explains the installation process for QARun. Please review System Requirements on page 13 to ensure that QARun will install and operate properly on your computer. Before proceeding with the QARun installation, Compuware recommends that you review the QARun Release Notes which includes information about new features, technical notes, and known issues. In addition, it documents recent changes that may not be included in your QARun documentation. Please review this information carefully; the Release Notes document is updated as new product information becomes available. To review the Release Notes prior to installation, refer to the Before Installation on page 11 of the Getting Started chapter. Required: Compuware recommends that you exit all non-essential Windows programs before running this setup program. Some Windows programs may interfere with the installation process. If QARun version or earlier is installed on your computer, or if you have any beta version installed, Compuware recommends that you back up your data and uninstall QARun before installing the new version. Failure to do so may cause problems. To install QARun, follow these steps: 1 If you are installing QARun on Windows NT or Windows 2000, log on as a user with administrator permissions. 2 Insert the QACenter CD into the CD-ROM drive. The QACenter CD browser should automatically appear. If it does not, navigate to the root directory and run the setup.exe file. Required: Client installation only: Navigate to the QARun s Client directory on the server and run the setup.exe file. 3 Click Install QACenter Products. 4 Click Install QARun. The Welcome dialog box appears. 5 Read the welcome screen and click Next. The License Agreement dialog box appears. 6 Read the license agreement and click Yes to accept the terms of the agreement. The Customer Information dialog box appears. 7 Type your name and company in the User Name and Company Name fields. Click Next. The Choose Destination Location dialog box appears.

15 8 Select a location for the QARun installation. By default, QARun installs in the folder x:\program Files\Compuware\QARun where x is the drive where Windows resides on your computer. To specify a different path, click the Browse button and select an existing folder or type the path name in the Path field. Click OK. 9 Click Next. The Select Components dialog box appears. This dialog box allows you to select or clear components for installation. Highlight a component to view a brief description. 10 Select the components you want to install: Active Object Recognition: Lets you define support for Java controls that may not be recognized by QARun out of the box. The Active Object Recognition (AOR) utility includes a collection of core Java classes and lets you add custom Helper classes and metadata based on your application and requirements. If you choose to install the AOR component, the Microsoft Virtual Machine will be installed on your computer. Client Setup Program: Includes the necessary files for other users to perform client installations. A client installation points to a centralized QARun database. This component is not available during a client installation. You might want to choose this option in order to implement subsequent client installations where you can share resources in one repository, centrally manage your QARun system, or move workstations. Demos: Includes sample target applications that can be used in conjunction with QARun s GUI-based and character-based getting started guides to help new users familiarize themselves with QARun. SAP Support: Includes support for testing SAP R/3 applications. This support includes QASAP.exe, which is part of QARun, and is used in place of the standard SAPLogon.exe program. Make your selection(s). Click Next. The Select Program Folder dialog box appears. 11 Specify a location for the QARun program shortcuts. You may type a new folder name, or select one from the existing folders list. Click Next. The Start Copying Files dialog box appears. Chapter 2 Installing QARun 15

16 12 Review the summary of the settings that you specified and click Next to start copying the program files. The Setup Status dialog box displays the progress of the installation. 13 After the installation completes, the Setup Complete dialog box appears. Depending on the circumstances, you will see one of the following dialog boxes: Display Release Notes and/or Register for FrontLine. Display Release Notes: Select this check box to review the information in the ReleaseNotes.htm file. This file contains information about new features, technical notes, and known issues that may enhance or impact QARun s performance. Release Notes contain recent changes that may not be included in your QARun product documentation. Register for FrontLine: Select this check box to register for the FrontLine technical support site. FrontLine provides fast access to critical information such as documentation, frequently asked questions, and product fixes. The first time you access FrontLine, you are required to register and obtain a password. Restart Your Computer: You may be prompted to restart your computer. If you are prompted to restart your computer, you may choose to restart it now (recommended) or to restart it later. 14 Click Finish to complete the installation of QARun. Where To Go Next The evaluation license (CompuLock) supplied with your QACenter product allows you to install the product and run it for a specific time period without first installing a license. During this trial period, you will be informed of how much evaluation time remains. At any time during the evaluation period, you can obtain and install a permanent license. When the evaluation period expires, you must obtain a license and install it before you can successfully run this product. See the License Installation Guide for instructions on installing a license. To access this online book: a b c Insert the QACenter CD into the CD-ROM drive. If the CD browser does not automatically start, navigate to the CD s root directory and run setup.exe. Click View QACenter Documentation. From the bookshelf, select the License Installation Guide. 16 QACenter Installation and Configuration Guide

17 If Adobe Acrobat or Acrobat Reader is not installed on your computer, click Install 3rd Party Software, then Install Adobe Acrobat Reader from QACenter s CD browser. Adobe Acrobat or Acrobat Reader is required to view the online books in PDF format. Compuware Central provides a central location for QARun Site Checks to publish and access reports. See the Compuware Central Installation and Configuration Guide for instructions on installing Compuware Central. If you installed the Client Setup Program component, you must share QARun s directory on your machine so that other users can access it and perform client installations. If you are ready to begin using QARun, proceed to Starting QARun and Connecting to a Database on page 17. For information about modifying, repairing, or removing your QARun installation, refer to the Maintaining the Installation chapter. Starting QARun and Connecting to a Database QARun s architecture is based on a test asset repository, or database. This multi-user repository offers centralized control of users and system access rights. This section provides details on connecting to the appropriate database and changing the Administration password. Before you use QARun, you need to determine the type of database you will be using. Use the following procedures to connect to the appropriate database type: Starting QARun and Connecting to a Microsoft Access Database on page 17. Setting Up QARun To Connect to an ODBC Database on page 18. Starting QARun and Connecting to a Microsoft Access Database If an existing database has not been established, use the following procedure to start QARun and connect to a Microsoft Access database: Required: If a QARun database already exists, the Select Database Connection dialog box will not appear. The Log On dialog box appears instead. If necessary, you can use the Database button on the Log On dialog box to select from existing QARun databases. Chapter 2 Installing QARun 17

18 1 Start QARun: Click the taskbar s Start button and choose Programs>Compuware>QARun. Choose the QARun icon. The Select Database Connection dialog box appears: 2 Select the Access MDB option and click Next. The Select Access MDB dialog box appears. 3 Type a new database path and name or click the Browse button to select from a list of existing databases. 4 Click the Finish button to select the database and continue. The Log On dialog box appears. If this is the first time QARun has been used, type the following information: User Name:Admin Password:Admin If this is an upgrade, the password may have been changed. Type the correct password for the Admin user. 5 Click OK to continue. You should now be successfully logged on as the QARun administrator. To ensure security, you should change the administrator s password (see Changing Database Maintenance Utility s Administrator Password on page 24). Setting Up QARun To Connect to an ODBC Database This section provides information on setting up QARun to connect to an ODBC database server. It provides a basic overview of how QARun communicates with the database server and stores QARun data on the server. It provides the following information: ODBC database server requirements (Oracle and SQL Server, for example). Instructions for running the Database Maintenance utility to create the tables on the database server. Instructions for starting QARun and connecting to the ODBC database. Before using QARun to connect to a database server as a client, you must have the following items already configured at your site: 18 QACenter Installation and Configuration Guide

19 Oracle Server Requirements The following Oracle Server requirements are necessary to connect QARun to an ODBC database server: An existing database server that runs Oracle 7.3 or 8. A database instance set up on the Oracle database server to hold the QARun data. Use the following specifics to configure the database instance: When the Oracle database instance is defined, you must specify the Storage Character Set as 'iso West European'. The NLS_LANGUAGE parameter should be set in the parameter file as: NLS_LANGUAGE = 'AMERICAN' An Oracle userid and password to allow the QARun administrator to set up on the Oracle database server. Access to a valid owner name (also known as a schema) on the Oracle database server. This owner name is the userid that will be associated with all the QARun tables in the database. You must have a unique DSN for each Oracle User ID. The QARun workstation set up as an Oracle client. The workstation should be able to connect and communicate with the Oracle database server. The following components of the Oracle client must be installed and configured on the workstation: Microsoft s MSORCL32.DLL driver provided with the MDAC installation: The ODBC driver establishes the ODBC data source, which identifies an alias to the SQL*Net connect string alias. SQL*Net Easy for Windows 98 SE or SQL*Net Client for Windows NT: The SQL*Net connect string alias establishes the connection to the QARun database instance on the Oracle database server. SQL Server Requirements The following SQL Server requirements are necessary to connect QARun to a SQL Server: An existing database server that runs SQL Server 6.5, 7.0, or Chapter 2 Installing QARun 19

20 A database instance set up on the SQL Server database server to hold the QARun data. Use the following specifics to configure the database instance: When the SQL Server database instance is defined, you must specify the Storage Character Set (also known as ISO ). A SQL Server user ID and password to allow the QARun administrator to set up on the database server. Access to a valid owner name (also known as a schema) on the SQL Server database server. This owner name is the user ID that will be associated with all the QARun tables in the database. You must have a unique DSN for each SQL User ID. The QARun workstation set up as an SQL Server client. The workstation should be able to connect and communicate with the SQL Server database server, and there must be an ODBC DSN configured to use the QARun data. The following components of the SQL Server must be installed and configured on the workstation: The SQLSRV32.DLL driver provided with the MDAC installation. Run QARun s Database Maintenance utility before attempting to connect QARun to the database server (see page 20 for instructions). Note: Running the Database Maintenance utility is only necessary if this is a new QARun ODBC database (both Oracle and SQL Server). If you are upgrading from an existing QARun ODBC database, or if you are converting from a QARun Microsoft Access database to an ODBC database, please refer to the QARun User s Guide for the appropriate database maintenance instructions. After QARun is installed on your workstation, use QARun s Database Maintenance utility to populate the QARun database instance on the database server. The QARun workstation then uses Data Access Objects (DAO) to connect to a local Microsoft Access link file. The link file resides on the local workstation and is used to map QARun s tables to the database server. Running the Database Maintenance Utility The Database Maintenance utility is QARun s database creation, update, repair, and conversion utility. During installation, this utility is also used to create the QARun tables on the different types of supported ODBC database servers and to establish secure logon access to the database server by generating a schema file. 20 QACenter Installation and Configuration Guide

21 Required: Using the Database Maintenance utility to create a new ODBC database will overwrite any QARun information already contained in the specified database instance. You should only use the following procedure to create a new QARun ODBC database. If you are upgrading your QARun ODBC database, or if you are converting from a Microsoft Access database to an ODBC database, please refer to the QARun User s Guide for instructions on using the Database Maintenance utility in this manner. 1 Ensure that QARun is closed and all users are logged off the system before using the Database Maintenance utility program. Note: Before closing QARun, you can choose Users from the Help menu to display the Current Users dialog box. This dialog box displays a list of all active QARun users currently logged on to the QARun database. Ensure that the users are logged off and close QARun. 2 To start the Database Maintenance utility, click the taskbar s Start button and choose Programs>Compuware>QARun>Database Maintenance. 3 From the File menu, choose New Database>Database Type. The applicable Data Source Connection dialog box appears: 4 Type the name of an existing ODBC data source or click the Browse button and select a data source name from the Select ODBC Data Source dialog box. 5 Type the owner name, user ID, and password for the QARun database instance on the database server. This user ID and password will be used to attempt a connection to the QARun database instance on the database server for the owner specified. If this succeeds, this user ID, password, and owner schema Chapter 2 Installing QARun 21

22 will eventually be encrypted and saved to a schema file with a.sch extension. 6 Click the Create button. If the user ID and password are accepted by the database server, the Data Source Creation Status dialog box appears and displays the progress of the database creation. After the QARun database is created on the database server, you are prompted for a location to save the schema file. 7 Click Yes to create the encrypted schema file. The Schema File Generation dialog box appears: 8 Type a name and location for the schema file in the Schema file field or click the Browse button to select an existing schema file. 9 Type the name of an existing ODBC data source or click the Browse button and select a data source name from the Select ODBC Data Source dialog box. 10 Type the owner name, user ID, and password for the QARun database instance on the database server. 11 Click OK. The schema file is saved and the Database Maintenance utility begins populating the QARun database instance with the necessary QARun tables. Starting QARun and Connecting to ODBC Databases Use the following procedure to start QARun and connect to a database server after successfully running the Database Maintenance utility: 22 QACenter Installation and Configuration Guide

23 1 Start QARun: Click the taskbar s Start button and select Programs>Compuware>QARun. Choose the QARun icon. 2 If this is the first time you ve started QARun, the Select Database Connection dialog box appears. If a QARun database already exists, the Select Database Connection dialog box will not appear. The Log On dialog box appears instead. If necessary, you can use the Database button on the Log On dialog box to select from existing QARun databases. 3 Click the Via ODBC option and click Next. The Select ODBC Data Source dialog box appears: 4 Use the New button (to create a new link file) or the Browse button (to select an existing link file) to select a path and name for the link file in the QACenter Link Database field. The link file (.qld) is a Microsoft Access database that resides on the local machine and maps QARun s tables to the database server. If QARun detects a change in the version of the database schema (version), the link file will automatically trigger an update to QARun s tables. Required: Users should each generate their own.qld and store it locally on their PCs. The same.qld should never be shared by multiple users. 5 Enter the name of the ODBC data source alias in the ODBC Data Source field or click the Browse button to view a list of existing ODBC data sources. 6 Enter the path and name of the schema file that was generated by QARun s Database Maintenance utility in the Schema File field (see Chapter 2 Installing QARun 23

24 Running the Database Maintenance Utility on page 20 for more information). 7 Click Finish. The first time you start QARun, or if you ve previously selected a database and QARun detects a change in the version of the database schema, the link file will automatically trigger an update to QARun s tables. QARun will update each internal table, and a status indicator will appear. 8 After the tables are updated, QARun s Log On dialog box appears. If this is the first time QARun has been used, enter the following information: User Name:Admin Password:Admin If this is an upgrade, the password may have been changed. Enter the correct password for the Admin user. 9 Click OK to continue. You should now be successfully logged on as the QARun administrator. To ensure security, you should change the administrator s password (see the following section on Changing Database Maintenance Utility s Administrator Password on page 24). Changing Database Maintenance Utility s Administrator Password When you install QARun for the first time, the Database Maintenance utility contains a single user (Admin). The default password for the Admin user is Admin. You should change the Admin user s password to prevent unauthorized access to this ID in the future. To change the administration password: 1 Start the Database Maintenance utility: Click the Start button and choose Programs>Compuware>QARun. Choose the Database Maintenance Utility icon. The Database Maintenance utility main window appears. 2 From the File menu, select Open Database>Database Type. The applicable Data Source Connection dialog box appears: 24 QACenter Installation and Configuration Guide

25 3 Type the name of the database or click Browse and navigate to the file. 4 If necessary for ODBC databases, enter the owner name, user ID, and password and click Open to log on to the ODBC database. 5 With the database open, choose Tools>User Administration. The Log On dialog box appears prompting you to enter your user name and password to log on to the QARun database. If this is the first time QARun has been used, enter the following information: User Name:Admin Password:Admin If this is an upgrade, the password may have been changed. Enter the correct password for the Admin user. You should now be successfully logged on as the QARun administrator. To ensure security, you should change the administrator s password. 6 Click OK to continue. The Select User dialog box appears: 7 Select Admin from the list of users and click the Edit button. The Edit User dialog box appears: Chapter 2 Installing QARun 25

26 8 Type the new password in the New Password Field. Type it again in the Verify Password field. Click OK. If you are setting up a network installation, you should add user IDs to the database for each end user. If you are using a stand-alone PC, you should add your own user ID. Refer to the section on adding users in the QARun User s Guide for instructions on adding end users. For information on using QARun and the Database Maintenance utility, refer to the QARun User s Guide. You can access this book from the documentation bookshelf by clicking the taskbar s Start button and choosing Programs>Compuware>QARun>Documentation Bookshelf. Select the QARun User s Guide from the list. 26 QACenter Installation and Configuration Guide

27 Chapter 3 Maintaining the Installation Accessing Maintenance Mode Modifying an Installation Repairing an Installation Removing a Product Note: TestPartner versions before do not employ these maintenance procedures. If you need to modify or repair a TestPartner installation on versions before 5.1.0, you must uninstall it, then reinstall it. See the Installing TestPartner chapter for instructions on removing TestPartner from your machine. Accessing Maintenance Mode There are two methods for accessing a QACenter product s maintenance mode: from the QACenter CD or from the Windows Control Panel. Required: Compuware recommends that you exit all non-essential Windows programs before running this setup program. Some Windows programs may interfere with the installation process. Accessing Maintenance Mode from the QACenter CD 1 In the CD-ROM drive, insert the QACenter CD containing the same version of the product that you have installed. The QACenter CD browser should automatically appear. If it does not, navigate to the root directory and run the setup.exe file. 2 Click Install QACenter Products. 27

28 3 Click Install product name (where product name is the name of the product that you want to maintain). You are presented with three maintenance mode options: modify, repair, and remove. Accessing Maintenance Mode from the Windows Control Panel 1 Click the Windows Start button and choose Settings>Control Panel. The Control Panel window appears. 2 Windows 9x/NT: Choose the Add/Remove Programs icon. The Add/Remove Programs Properties dialog box appears. Select the QACenter product to maintain and click Add/Remove. Windows 2000: Choose the Add/Remove Programs icon. The Add/ Remove Programs dialog box appears. Select the QACenter product to maintain and click Change/Remove. You are presented with the three maintenance mode options: modify, repair, and remove. For more information about these options, see the appropriate section in this chapter. Modifying an Installation For products with optional components, you may want to add or remove a component. Rather than uninstall and re-install the product, you can modify your installation. Modifying Products With Optional Components 1 Access maintenance mode using one of the two methods described at the beginning of this chapter. 2 Select the Modify option. Click Next. The Select Components dialog box appears allowing you to add or remove components. 3 Click Next. Setup will add or remove the appropriate components. 4 After modifying, you may be prompted to restart your computer. If you are prompted to restart your computer, you may choose to restart it now (recommended) or to restart it later. 5 Click Finish to complete the maintenance. 28 QACenter Installation and Configuration Guide

29 Repairing an Installation There may be times when you will need to repair a damaged QACenter product installation. This could be due to an inadvertent deletion or corruption of the program. To repair your QACenter product, follow these steps: 1 Access maintenance mode using one of the two methods described in Accessing Maintenance Mode at the beginning of this chapter. 2 Select the Repair option. Click Next. Setup will repair the specified QACenter product. 3 After repairing, you may be prompted to restart your computer. If you are prompted to restart your computer, you may choose to restart it now (recommended) or to restart it later. 4 Click Finish to complete the maintenance. Removing a Product If you want to remove a QACenter product from a PC, follow these steps: 1 Access maintenance mode using one of two methods described at the beginning of this chapter. 2 Select the Remove option. Click Next. The Confirm File Deletion dialog box appears. 3 Click OK. Setup will remove the specified QACenter product from your PC. If your product uses a database repository, you have the option to either save or delete it. Do not delete it if you need to retain the data in the database, as in the case of a product upgrade. 4 After uninstalling, you may be prompted to restart your computer. If you are prompted to restart your computer, you may choose to restart it now (recommended) or to restart it later. 5 Click Finish to complete the maintenance. Chapter 3 Maintaining the Installation 29

30 30 QACenter Installation and Configuration Guide

31 BETA REVIEW Index A access methods maintenance 27 G getting started 9 B before installing 11 H help 7 FrontLine Web site 6 C Compuware World Wide Web sites 6 Compuware technical support FrontLine Web site 6 configuring QARun 17, 18 customer support 7 F FrontLine technical support Web site 6 I installation pre-requisites 11 types 10 installing modify product components 28 QACenter products prerequisites 9 QARun 14 repairing a product installation 29 types of installations 10 introduction 5 M Maintaining the Installation 27 maintenance access methods 27 31

32 modify 28 remove 29 repair 29 modify maintenance 28 O operating requirements QARun 13 BETA REVIEW ODBC driver 19 SQL*NET 19 storage character set 19, 20 Oracle databases 18 passwords, changing 24 SQL Server ODBC driver 20 SQL server databases 18 starting 17 system requirements 13 P pre-installation 11 prerequisites for QACenter product installation 9 R remove maintenance 29 repair maintenance 29 Q QACenter FrontLine Web site 6 help 6 technical support 6 QACenter products descriptions 9 QARun Access databases 17 changing password 24 configuring 17, 18 database maintenance utility 20 databases, connecting to 17, 18 default installation directory 15 installing 14 logging on 18, 24, 25 ODBC drivers 19, 20 Oracle instance 19, 20 NLS_LANGUAGE parameter 19 S support FrontLine Web site 6 system requirements QARun 13 T technical support 7 FrontLine Web site 6 types of installation 10 U upgrading QARun QACenter Installation and Configuration Guide

33 W World Wide Web, Compuware sites 6 BETA REVIEW Index 33

TrackRecord Installation and Configuration Guide Release

TrackRecord Installation and Configuration Guide Release TrackRecord Installation and Configuration Guide Release 06.03.00 Technical support is available from our Technical Support Hotline or via our FrontLine Support Web site. Technical Support Hotline: 1-800-538-7822

More information

QACenter Installation and Configuration Guide. Release 4.6

QACenter Installation and Configuration Guide. Release 4.6 QACenter Installation and Configuration Guide Release 4.6 ii Please direct questions about QACenter or comments on this document to: QACenter Technical Support Compuware Corporation 31440 Northwestern

More information

QARun GUI Testing Getting Started Guide

QARun GUI Testing Getting Started Guide QARun GUI Testing Getting Started Guide Release 4.6 ii Please direct questions about QARun or comments on this document to: QARun Technical Support Compuware Corporation 31440 Northwestern Highway Farmington

More information

QARun GUI Testing Getting Started Guide. Release 04.09

QARun GUI Testing Getting Started Guide. Release 04.09 QARun GUI Testing Getting Started Guide Release 04.09 ii Please direct questions about QARun or comments on this document to: QARun Technical Support Compuware Corporation One Campus Martius Detroit, MI

More information

QALoad. Installation and Configuration Guide. Release 5.9

QALoad. Installation and Configuration Guide. Release 5.9 QALoad Installation and Configuration Guide Release 5.9 Copyright Micro Focus (IP) Limited 1998-2009. All Rights Reserved. The software and information contained herein are proprietary to, and comprise

More information

Relativity Designer Installation Guide

Relativity Designer Installation Guide Liant Software Corporation Relativity Designer Installation Guide Version 5 Copyright 1994-2003 by Liant Software Corporation. All rights reserved. Printed in U.S.A. No part of this publication may be

More information

Mercury WinRunner. Installation Guide Version 9.2. Document Release Date: February 26, 2007

Mercury WinRunner. Installation Guide Version 9.2. Document Release Date: February 26, 2007 Mercury WinRunner Installation Guide Version 9.2 Document Release Date: February 26, 2007 Mercury WinRunner Installation Guide, Version 9.2 This document, and the accompanying software and other documentation,

More information

TestPartner. Active Object Recognition (AOR) Training Guide

TestPartner. Active Object Recognition (AOR) Training Guide TestPartner Active Object Recognition (AOR) Training Guide Customer support is available from our Customer Support Hotline or via our FrontLine Support Web site. Technology Customer Support Compuware Corporation

More information

Topaz for Java Performance Installation Guide. Release 16.03

Topaz for Java Performance Installation Guide. Release 16.03 Topaz for Java Performance Installation Guide Release 16.03 ii Topaz for Java Performance Installation Guide Please direct questions about Topaz for Java Performance or comments on this document to: Topaz

More information

Novell ZENworks Asset Management 7

Novell ZENworks Asset Management 7 Novell ZENworks Asset Management 7 w w w. n o v e l l. c o m July 2006 INSTALLATION GUIDE Table Of Contents 1. Installation Overview... 1 Upgrade/Update Matrix...1 Installation Choices...2 ZENworks Asset

More information

ChromQuest 4.2 Chromatography Data System

ChromQuest 4.2 Chromatography Data System ChromQuest 4.2 Chromatography Data System Installation Guide CHROM-97200 Revision A April 2005 2006 Thermo Electron Corporation. All rights reserved. Surveyor is a registered trademark and ChromQuest is

More information

DesignPro Tools for Xerox Elixir Technologies Corporation. All rights reserved.

DesignPro Tools for Xerox Elixir Technologies Corporation. All rights reserved. Follow the Crop Marks DesignPro Tools for Xerox Getting Started Guide C 1998-2008 Elixir Technologies Corporation. All rights reserved. Elixir Technologies Corporation 721 East Main Street Ventura, CA

More information

Copyright Autodesk, Inc.

Copyright Autodesk, Inc. Customer and Administration Building, Ditzingen, Germany - Design by Barkow Leibinger Architects Copyright 2003-2008 Autodesk, Inc. Table of Contents 1 Introduction... 3 What is Facility Manager?... 3

More information

MapMarker Plus Desktop Installation Guide

MapMarker Plus Desktop Installation Guide MapMarker Plus 11.0 Desktop Installation Guide Information in this document is subject to change without notice and does not represent a commitment on the part of the vendor or its representatives. No

More information

WEBSEWSS SINGLE SERVER INSTALLATION INSTRUCTIONS

WEBSEWSS SINGLE SERVER INSTALLATION INSTRUCTIONS 2300 East 14th Street Tulsa, Oklahoma 74104 USA Phone: (918) 749-1119 Fax: (918) 749-2217 e-mail: info@statsoft.com WEB: http://www.statsoft.com Notes: WEBSEWSS SINGLE SERVER INSTALLATION INSTRUCTIONS

More information

HP QuickTest Professional

HP QuickTest Professional HP QuickTest Professional Software Version: 10.00 Installation Guide Manufacturing Part Number: T6513-90038 Document Release Date: January 2009 Software Release Date: January 2009 Legal Notices Warranty

More information

Reporting for Contact Center Setup and Operations Guide. BCM Contact Center

Reporting for Contact Center Setup and Operations Guide. BCM Contact Center Reporting for Contact Center Setup and Operations Guide BCM Contact Center Document Number: Document Status: Standard Document Version: 05.01 Date: September 2006 Copyright 2005 2006 Nortel Networks, All

More information

Sage X3 Intelligence Financial Reporting. Installation and Upgrade Guide

Sage X3 Intelligence Financial Reporting. Installation and Upgrade Guide Financial Reporting Installation and Upgrade Guide The software described in this document is protected by copyright, and may not be copied on any medium except as specifically authorized in the license

More information

Installing DevPartner Java Edition Release 4.1

Installing DevPartner Java Edition Release 4.1 Installing DevPartner Java Edition Release 4.1 Technical support is available from our Technical Support Hotline or via our FrontLine Support Web site. Technical Support Hotline: 1-888-686-3427 Frontline

More information

EA/Studio Installation Guide

EA/Studio Installation Guide EA/Studio 1.5.2 Installation Guide Copyright 1994-2008 Embarcadero Technologies, Inc. Embarcadero Technologies, Inc. 100 California Street, 12th Floor San Francisco, CA 94111 U.S.A. All rights reserved.

More information

SVA NMP Monitor for Unicenter TNG on Windows NT/2000

SVA NMP Monitor for Unicenter TNG on Windows NT/2000 SVA NMP Monitor for Unicenter TNG on Windows NT/2000 Installation Guide Version 3.1.1 First Edition Proprietary Information Statement The information in this document is confidential and proprietary to

More information

MapMarker Plus Developer Installation Guide

MapMarker Plus Developer Installation Guide MapMarker Plus 11.1 Developer Installation Guide Information in this document is subject to change without notice and does not represent a commitment on the part of the vendor or its representatives. No

More information

Server Software Installation Guide. GlobalScan TM Server Software Installation Guide Ver. 1.4

Server Software Installation Guide. GlobalScan TM Server Software Installation Guide Ver. 1.4 Server Software Installation Guide GlobalScan TM Server Software Copyright 2003 by Ricoh Corporation. All Rights Reserved. Manual Updated 1/4/03. No part of this publication may be reproduced, transmitted,

More information

FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory SQL Server Installation & Administration Guide Version

FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory SQL Server Installation & Administration Guide Version FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory SQL Server Installation & Administration Guide Version 2009.1 2009 Sage Software, Inc. All rights reserved. Published by Sage 2325 Dulles Corner

More information

Installing IPM on Windows

Installing IPM on Windows CHAPTER 5 This chapter describes how to install the IPM server software on Windows NT, Windows 2000 Professional, or Windows 2000 Server system, and how to install the IPM client software on a Windows

More information

Oracle IVR Integrator

Oracle IVR Integrator Oracle IVR Integrator Installing Oracle IVR Integrator Release 11i for Windows NT August 2000 Part No. A86042-01 Installation Overview Installation of Oracle IVR Integrator requires you to follow a sequence

More information

Silk Performance Manager Installation and Setup Help

Silk Performance Manager Installation and Setup Help Silk Performance Manager 18.5 Installation and Setup Help Micro Focus The Lawn 22-30 Old Bath Road Newbury, Berkshire RG14 1QN UK http://www.microfocus.com Copyright 2004-2017 Micro Focus. All rights reserved.

More information

Administrator for Enterprise Clients: User s Guide. Second Edition

Administrator for Enterprise Clients: User s Guide. Second Edition Administrator for Enterprise Clients: User s Guide Second Edition The correct bibliographic citation for this manual is as follows: SAS Institute Inc. 2002. Administrator for Enterprise Clients: User s

More information

Professional Edition on a Server for Network Access & On Thin-Client Workstations Using Client Deployment 5

Professional Edition on a Server for Network Access & On Thin-Client Workstations Using Client Deployment 5 Addendum to the Microsoft Business Solutions for Analytics FRx 6.7 Installation and Configuration Guide FRx 6.7 Solomon Installation Copyright and Trademarks Copyright 2002 Great Plains Software, Inc.

More information

EMC ApplicationXtender Reports Management 6.0

EMC ApplicationXtender Reports Management 6.0 EMC ApplicationXtender Reports Management 6.0 Administrator s Guide 300-008-283 REV A01 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright 1994-2009 EMC

More information

DOCUMENT HISTORY REV. NO. CHANGES DATE. 000 New Document 30 Mar Document Revision:

DOCUMENT HISTORY REV. NO. CHANGES DATE. 000 New Document 30 Mar Document Revision: DOCUMENT HISTORY DOCU-PROOF ENTERPRISE INSTALLATION GUIDE REV. NO. CHANGES DATE 000 New Document 30 Mar. 2010 001 Document Revision: 23 Jun. 2010 Added database support for MS SQL Server and ORACLE. 002

More information

Installation Instructions

Installation Instructions New System Installation Instructions Last updated January 2014 Table of Contents SYSTEM REQUIREMENTS... 3 1. OVERVIEW... 4 1.1 CD ROM CONTENTS... 4 1.2 PRODUCT REGISTRATION NUMBERS... 4 Manual Product

More information

Product Documentation. ER/Studio Portal. Installation Guide. Version 1.5 Published October 8, 2009

Product Documentation. ER/Studio Portal. Installation Guide. Version 1.5 Published October 8, 2009 Product Documentation ER/Studio Portal Installation Guide Version 1.5 Published October 8, 2009 2nd Edition Copyright 1994-2009 Embarcadero Technologies, Inc. Embarcadero Technologies, Inc. 100 California

More information

ER/Studio Enterprise Portal 1.1 Installation Guide

ER/Studio Enterprise Portal 1.1 Installation Guide ER/Studio Enterprise Portal 1.1 Installation Guide 2nd Edition, April 16/2009 Copyright 1994-2009 Embarcadero Technologies, Inc. Embarcadero Technologies, Inc. 100 California Street, 12th Floor San Francisco,

More information

Contents. 1 Introduction... 2 Introduction to Installing and Configuring LEI... 4 Upgrading NotesPump to LEI...

Contents. 1 Introduction... 2 Introduction to Installing and Configuring LEI... 4 Upgrading NotesPump to LEI... Contents 1 Introduction... Organization of this Manual... Related Documentation... LEI and DECS Documentation... Other Documentation... Getting Started with Lotus Enterprise Integrator... 2 Introduction

More information

Upgrading from Call Center Reporting to

Upgrading from Call Center Reporting to Upgrading from Call Center Reporting to Reporting for Call Center Upgrade Document Reporting for Call Center Release 2.2.1xx Document Number: 200-0400-110 Document Status: Standard Document Version: 3.02

More information

SQLBase. Starter Guide

SQLBase. Starter Guide SQLBase Starter Guide 20-2905-1004 Trademarks Centura, Centura net.db, Centura Ranger, the Centura logo, Centura Web Developer, Gupta, the Gupta logo, Gupta Powered, the Gupta Powered logo, Fast Facts,

More information

Oracle8 Enterprise Edition

Oracle8 Enterprise Edition Oracle8 Enterprise Edition Release 8.0.6 for Windows NT Part No. A69522-01 Contents Included Products on page 3 Pre-Installation on page 6 System Requirements on page 7 Products Available for Installation

More information

MapMarker for Windows Installation Guide

MapMarker for Windows Installation Guide MapMarker for Windows 10.0 Installation Guide Information in this document is subject to change without notice and does not represent a commitment on the part of the vendor or its representatives. No part

More information

Inmagic Content Server Enterprise Inmagic Content Server Standard Version 1.3 Installation Notes

Inmagic Content Server Enterprise Inmagic Content Server Standard Version 1.3 Installation Notes Inmagic Content Server Enterprise Inmagic Content Server Standard Version 1.3 Installation Notes Thank you for purchasing Inmagic Content Server. Content Server is an enterprise-wide scalable content management

More information

Upgrading from Call Center Reporting to Reporting for Call Center

Upgrading from Call Center Reporting to Reporting for Call Center Upgrading from Call Center Reporting to Reporting for Call Center www.nortelnetworks.com 2003 Nortel Networks i Table of Contents Table of Contents Change History...1 How to use this guide...2 Introduction...

More information

PlexService 2.5 Installation Guide

PlexService 2.5 Installation Guide PlexService 2.5 Installation Guide Copyright 2000-2003 K-Plex Inc. All rights reserved Page 1 Table of Contents 1 Introduction... 3 2 System Requirements... 4 2.1 Hardware... 4 2.2 Software... 4 3 Installation...

More information

Read Naturally SE Software Guide. Version 2.0

Read Naturally SE Software Guide. Version 2.0 Read Naturally SE Software Guide Version 2.0 Under the terms of the Read Naturally Software Edition License Agreement, you have permission to use only the levels you purchased with the number of users

More information

STATISTICA VERSION 10 STATISTICA MONITORING AND ALERTING SERVER (MAS) INSTALLATION INSTRUCTIONS

STATISTICA VERSION 10 STATISTICA MONITORING AND ALERTING SERVER (MAS) INSTALLATION INSTRUCTIONS Pre-requisites: STATISTICA VERSION 10 STATISTICA MONITORING AND ALERTING SERVER (MAS) INSTALLATION INSTRUCTIONS 1. The installation of the STATISTICA Monitoring And Alerting Server (MAS) network version

More information

Novell ZENworks Asset Management 7.5

Novell ZENworks Asset Management 7.5 Novell ZENworks Asset Management 7.5 w w w. n o v e l l. c o m October 2006 MIGRATING & UPGRADING Table Of Contents 1. Migrating and Upgrading... 3 Upgrading from Earlier Versions...3 Upgrading Client

More information

AccuRoute Web Client v2.0 installation and configuration guide

AccuRoute Web Client v2.0 installation and configuration guide AccuRoute Web Client v2.0 installation and configuration guide July 22, 2009 Omtool, Ltd. 6 Riverside Drive Andover, MA 01810 Phone: +1/1 978 327 5700 Toll-free in the US: +1/1 800 886 7845 Fax: +1/1 978

More information

BLUEPRINT TEAM REPOSITORY. For Requirements Center & Requirements Center Test Definition

BLUEPRINT TEAM REPOSITORY. For Requirements Center & Requirements Center Test Definition BLUEPRINT TEAM REPOSITORY Installation Guide for Windows For Requirements Center & Requirements Center Test Definition Table Of Contents Contents Table of Contents Getting Started... 3 About the Blueprint

More information

Installing DevPartner Java Edition Release 3.3

Installing DevPartner Java Edition Release 3.3 Installing DevPartner Java Edition Release 3.3 Please direct questions about DevPartner Java Edition or comments on this document to: Customer Support Compuware Corporation One Campus Martius Detroit,

More information

Tivoli Decision Support 2.1

Tivoli Decision Support 2.1 ,QVWDOODWLRQ*XLGH Tivoli Decision Support 2.1 Tivoli Decision Support 2.1 Installation Guide (October 1999) Copyright 1999 by Tivoli Systems, an IBM Company, including this documentation and all software.

More information

Mercury QuickTest Professional. Installation Guide Version 9.0

Mercury QuickTest Professional. Installation Guide Version 9.0 Mercury QuickTest Professional Installation Guide Version 9.0 Mercury QuickTest Professional Installation Guide, Version 9.0 This manual, and the accompanying software and other documentation, is protected

More information

Micro Focus. Enterprise View. Installing Enterprise View

Micro Focus. Enterprise View. Installing Enterprise View Micro Focus Enterprise View Installing Enterprise View Copyright 2010 Micro Focus (IP) Ltd. All rights reserved. Micro Focus (IP) Ltd. has made every effort to ensure that this book is correct and accurate,

More information

Sage 100 ERP 2015 Installation and System Administrator s Guide

Sage 100 ERP 2015 Installation and System Administrator s Guide Sage 100 ERP 2015 Installation and System Administrator s Guide This is a publication of Sage Software, Inc. Version 2015 Copyright 2015 Sage Software, Inc. All rights reserved. Sage, the Sage logos, and

More information

Inmagic Content Server Standard Version 9.00 Installation Notes for New and Upgrade Installations

Inmagic Content Server Standard Version 9.00 Installation Notes for New and Upgrade Installations Inmagic Content Server Standard Version 9.00 Installation Notes for New and Upgrade Installations Revision 2 Thank you for purchasing Inmagic Content Server. This document is intended for the following

More information

Installing the Eigner PLM 5.0 Windows Server

Installing the Eigner PLM 5.0 Windows Server Installation Manual Installing the Eigner PLM 5.0 Windows Server for Microsoft SQL Server 2000 Part Number WQ501a 2002 Eigner U.S. Headquarters: European Headquarters: EIGNER U.S. Inc. EIGNER Germany GmbH

More information

ThinkVantage Fingerprint Software

ThinkVantage Fingerprint Software ThinkVantage Fingerprint Software 12 2 1First Edition (February 2006) Copyright Lenovo 2006. Portions Copyright International Business Machines Corporation 2006. All rights reserved. U.S. GOVERNMENT

More information

Sage Installation and System Administrator s Guide. March 2019

Sage Installation and System Administrator s Guide. March 2019 Sage 100 2019 Installation and System Administrator s Guide March 2019 2019 The Sage Group plc or its licensors. All rights reserved. Sage, Sage logos, and Sage product and service names mentioned herein

More information

MDA HMI. Commissioning Guide Edition 04/2005. Machine Data Evaluation. Machine Data Acquisition. Archiving History

MDA HMI. Commissioning Guide Edition 04/2005. Machine Data Evaluation. Machine Data Acquisition. Archiving History MDA HMI Commissioning Guide Edition 04/2005 Machine Data Acquisition Machine Data Evaluation Archiving History Commissioning Guide MDA HMI General 1 Standard Software for Production Automation Installation

More information

System Management Guide Version 7.4a

System Management Guide Version 7.4a Epicor Active Planner Open Integration System Management Guide Version 7.4a Copyright Trademarks Program copyright 1995-2011 Sage Software, Inc. This work and the computer programs to which it relates

More information

IBM i Version 7.2. Connecting to your system Connecting to Your system with IBM Navigator for i IBM

IBM i Version 7.2. Connecting to your system Connecting to Your system with IBM Navigator for i IBM IBM i Version 7.2 Connecting to your system Connecting to Your system with IBM Navigator for i IBM IBM i Version 7.2 Connecting to your system Connecting to Your system with IBM Navigator for i IBM Note

More information

3M Molecular Detection System Software Upgrade/Installation Instructions

3M Molecular Detection System Software Upgrade/Installation Instructions User Manual Supplement Number: TB.342837.03 Effective Date: March 2018 Supersedes: TB.342837.02 Technology Platform: 3M Molecular Detection System Originating Location: St. Paul, MN 3M Molecular Detection

More information

ODBC. Getting Started OpenLink Server Software Using ODBC

ODBC. Getting Started OpenLink Server Software Using ODBC Getting Started OpenLink Server Software Using The documentation in this publication is provided pursuant to a Sales and Licensing Contract for the Prophet 21 System entered into by and between Prophet

More information

FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory Installation & Administration Guide Version

FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory Installation & Administration Guide Version FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory Installation & Administration Guide Version 2011.1 2011 Sage Software, Inc. All rights reserved. Portions Copyrighted 1991-2001 by ianywhere

More information

Workstation Setup Instructions Release 9.5

Workstation Setup Instructions Release 9.5 Workstation Setup Instructions Release 9.5 Copyright 2007 Newmarket International, Inc. All rights reserved. The information in this document is confidential and proprietary to Newmarket International,

More information

Installation Guide. Tivoli Decision Support 2.0

Installation Guide. Tivoli Decision Support 2.0 Installation Guide Tivoli Decision Support 2.0 Tivoli Decision Support 2.0 Installation Guide (August, 1998) Copyright 1998 by Tivoli Systems, an IBM Company, including this documentation and all software.

More information

Installation and System Configuration Version 7.40

Installation and System Configuration Version 7.40 Installation and System Configuration Version 7.40 Sage ERP MAS 500 4AIN1090-0511 1996-2011 Sage Software, Inc. All rights reserved. Sage, the Sage logos, and the Sage product and service names mentioned

More information

Getting Started. Citrix Load Manager. Version 1.0. Citrix Systems, Inc.

Getting Started. Citrix Load Manager. Version 1.0. Citrix Systems, Inc. Getting Started Citrix Load Manager Version 1.0 Citrix Systems, Inc. Information in this document is subject to change without notice. Companies, names, and data used in examples herein are fictitious

More information

Sage Fixed Assets Single User

Sage Fixed Assets Single User Single User 2018.0 Installation guide October 2017 Last updated October 17, 2017 2017 The Sage Group plc or its licensors. All rights reserved. Sage, Sage logos, and Sage product and service names mentioned

More information

Sage Installation and System Administrator s Guide. October 2016

Sage Installation and System Administrator s Guide. October 2016 Sage 100 2017 Installation and System Administrator s Guide October 2016 2016 The Sage Group plc or its licensors. All rights reserved. Sage, Sage logos, and Sage product and service names mentioned herein

More information

ODBC DOCUMENTATION UPDATES

ODBC DOCUMENTATION UPDATES DOCUMENTATION UPDATES Date Description Where Changed 5/16/03 New upgrading instructions have been added to upgrade OpenLink to version 4.1. Getting Started chapter, in the Upgrading OpenLink section (page

More information

Business Insights Dashboard

Business Insights Dashboard Business Insights Dashboard Sage 500 ERP 2000-2013 Sage Software, Inc. All rights reserved. Sage, the Sage logos, and the Sage product and service names mentioned herein are registered trademarks or trademarks

More information

Jonas Activity Management Technical Deployment Guide

Jonas Activity Management Technical Deployment Guide Jonas Activity Management Technical Deployment Guide [] Software for Life Jonas Activity Management Technical Deployment Guide, Jonas, Jonas Software, Software for Life, and Gary Jonas Computing are registered

More information

IBM Client Security Solutions. Client Security Software Version 1.0 Administrator's Guide

IBM Client Security Solutions. Client Security Software Version 1.0 Administrator's Guide IBM Client Security Solutions Client Security Software Version 1.0 Administrator's Guide December 1999 1 Before using this information and the product it supports, be sure to read Appendix A - U.S. export

More information

Installation Instructions. Release Version 14.0 August 15 th, 2008

Installation Instructions. Release Version 14.0 August 15 th, 2008 Release Version 14.0 August 15 th, 2008 ARGUS Software: ARGUS Valuation - DCF The contents of this document are considered proprietary by ARGUS Software, the information enclosed and any portion thereof

More information

Release Notes for Avaya Proactive Contact 5.0 Supervisor. Release Notes for Avaya Proactive Contact 5.0 Supervisor

Release Notes for Avaya Proactive Contact 5.0 Supervisor. Release Notes for Avaya Proactive Contact 5.0 Supervisor Release Notes for Avaya Proactive Contact 5.0 Supervisor Copyright@2011 Notice: While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time

More information

LABEL ARCHIVE Administrator s Guide

LABEL ARCHIVE Administrator s Guide LABEL ARCHIVE Administrator s Guide DOC-LAS2015_25/05/2015 The information in this manual is not binding and may be modified without prior notice. Supply of the software described in this manual is subject

More information

Sage Fixed Assets Premier. Installation guide

Sage Fixed Assets Premier. Installation guide Premier Installation guide Last updated: Monday, January 15, 2019 2019 The Sage Group plc or its licensors. All rights reserved. Sage, Sage logos, and Sage product and service names mentioned herein are

More information

CorpSystem Workpaper Manager

CorpSystem Workpaper Manager CorpSystem Workpaper Manager Networking Best Practices Guide Version 6.5 Summer 2010 Copyright: 2010, CCH, a Wolters Kluwer business. All rights reserved. Material in this publication may not be reproduced

More information

ProteinChip Software Installation and Setup. Data Manager

ProteinChip Software Installation and Setup. Data Manager ProteinChip Software 3.0.7 Installation and Setup Data Manager Page i Bio-Rad Laboratories, Inc. Notice to Purchaser: Limited License Surface Enhanced Laser Desorption/Ionization ( SELDI ) is a patented

More information

Function Point WORKBENCH Release 7.0k INSTALLATION GUIDE TABLE OF CONTENTS

Function Point WORKBENCH Release 7.0k INSTALLATION GUIDE TABLE OF CONTENTS Function Point WORKBENCH Release 7.0k GUIDE TABLE OF CONTENTS FUNCTION POINT WORKBENCH RELEASE 7.0K GUIDE... 1 LICENCE TYPES... 3 Standalone Licence Machine Dependent (Single User)... 3 Network Licence

More information

EventMaster PLUS! Version 4 Installation and Upgrade Guide. Workgroup Deployment Microsoft MSDE 2000

EventMaster PLUS! Version 4 Installation and Upgrade Guide. Workgroup Deployment Microsoft MSDE 2000 EventMaster PLUS! Version 4 Installation and Upgrade Guide Deployment Microsoft MSDE 2000 EventMaster4 PLUS! EventMaster4 PLUS! EventMaster4 PLUS! EventMaster4 PLUS! Please send any comments regarding

More information

Getting Started with Pervasive.SQL Server Edition

Getting Started with Pervasive.SQL Server Edition Getting Started with Pervasive.SQL Server Edition Copyright 1998 Pervasive Software Inc. All rights reserved worldwide. Reproduction, photocopying, or transmittal of this publication, or portions of this

More information

Omtool Server Monitor Administrator Guide

Omtool Server Monitor Administrator Guide Omtool Server Monitor Administrator Guide For AccuRoute and Genifax environments March 19, 2010 (4.0342-AA) Omtool, Ltd. 6 Riverside Drive Andover, MA 01810 Phone: 978-327-5700 Toll-free in the US: 800-886-7845

More information

LifeSize Control Installation Guide

LifeSize Control Installation Guide LifeSize Control Installation Guide January 2009 Copyright Notice 2005-2009 LifeSize Communications Inc, and its licensors. All rights reserved. LifeSize Communications has made every effort to ensure

More information

Mailbox Manager Getting Started Guide. Licensing Installation Options System Requirements Installation Instructions

Mailbox Manager Getting Started Guide. Licensing Installation Options System Requirements Installation Instructions Mailbox Manager Getting Started Guide Licensing Installation Options System Requirements Installation Instructions Mailbox Manager Release 5.4 December 2006 Table of Contents Introduction... 1 Licenses...

More information

P3e/c 4.1: Training Facility Requirements

P3e/c 4.1: Training Facility Requirements I. Workstation Minimum Requirements a. Hardware Pentium 600 MHz 256 MB RAM 100 MB hard disk space Video Card 1. Must have at least 32 MB of onboard video RAM 2. Be able to perform at a minimum of 1024

More information

Installation and Configuration Guide

Installation and Configuration Guide Installation and Configuration Guide 2013 DataNet Quality Systems. All rights reserved. Printed in U.S.A. WinSPC and QualTrend are registered trademarks of DataNet Quality Systems. All other trademarks

More information

Administrator s Guide. Doc ID BZWARE-IN001B-EN-P

Administrator s Guide. Doc ID BZWARE-IN001B-EN-P Administrator s Guide Doc ID BZWARE-IN001B-EN-P Contacting Technical Support Telephone 1-440-646-5800 Rockwell Software Technical Support Fax 1-440-646-5801 World Wide Web www.software.rockwell.com Copyright

More information

Inmagic Content Server Workgroup Version 9.00 Installation Notes for New and Upgrade Installations

Inmagic Content Server Workgroup Version 9.00 Installation Notes for New and Upgrade Installations Inmagic Content Server Workgroup Version 9.00 Installation Notes for New and Upgrade Installations Revision 2 Thank you for purchasing Inmagic Content Server. This document is intended for the following

More information

Kinetica 5.1 Kinetica Installation Guide

Kinetica 5.1 Kinetica Installation Guide Kinetica 5.1 Kinetica Installation Guide 2012 Thermo Fisher Scientific Inc. All rights reserved. The information in this document is subject to change without notice and should not be construed as a commitment

More information

Installation Assistance Windows/Microsoft Updates Updating from Spectra 7.x Upgrading from Spectra 6.x... 7

Installation Assistance Windows/Microsoft Updates Updating from Spectra 7.x Upgrading from Spectra 6.x... 7 Spectra 7.2.1.1 Windows Upgrade Installation Instructions Installation Assistance... 3 Windows/Microsoft Updates... 3 Updating from Spectra 7.x... 4 Important Notices... 4 Downloading the Spectra Update

More information

Quick Update Guide for ComplianceOne Client

Quick Update Guide for ComplianceOne Client Choose a building block. Governance, Risk & Compliance Quick Update Guide for ComplianceOne Client ComplianceOne Solution Governance, Risk & Compliance Quick Update Guide for ComplianceOne Client Date

More information

TIE1.80InstallationGuideUK

TIE1.80InstallationGuideUK Installation Guide 112206 2006 Blackbaud, Inc. This publication, or any part thereof, may not be reproduced or transmitted in any form or by any means, electronic, or mechanical, including photocopying,

More information

Appeon Installation Guide for WebSphere

Appeon Installation Guide for WebSphere Appeon Installation Guide for WebSphere Appeon 6.5 for PowerBuilder WINDOWS DOCUMENT ID: DC00809-01-0650-01 LAST REVISED: November 2010 Copyright 2010 by Appeon Corporation. All rights reserved. This publication

More information

Client Data System. Upgrade Guide. CDS v3.2 to v4.1.1 (Network Version) Client Data System Upgrade Guide 3.2 to (Network) Revised:

Client Data System. Upgrade Guide. CDS v3.2 to v4.1.1 (Network Version) Client Data System Upgrade Guide 3.2 to (Network) Revised: Client Data System Upgrade Guide CDS v3.2 to v4.1.1 (Network Version) Copyright 2003, E-Z Data, Inc. E-Z Data, Inc. 918 East Green Street Pasadena, CA 91106 Telephone: (626) 585-3505 Fax: (626) 440-9097

More information

Installation Guide for Windows

Installation Guide for Windows Installation Guide for Windows IDL Version 5.4 September, 2000 Edition Copyright Research Systems, Inc. All Rights Reserved Restricted Rights Notice The IDL software program and the accompanying procedures,

More information

MapMarker Plus. for Windows v Installation Guide

MapMarker Plus. for Windows v Installation Guide MapMarker Plus for Windows v. 10.2 Installation Guide Information in this document is subject to change without notice and does not represent a commitment on the part of the vendor or its representatives.

More information

SIEBEL ANALYTICS INSTALLATION AND CONFIGURATION GUIDE

SIEBEL ANALYTICS INSTALLATION AND CONFIGURATION GUIDE SIEBEL ANALYTICS INSTALLATION AND CONFIGURATION GUIDE VERSION 7.7, REV. A MARCH 2004 Siebel Systems, Inc., 2207 Bridgepointe Parkway, San Mateo, CA 94404 Copyright 2004 Siebel Systems, Inc. All rights

More information

This product includes software developed by the Apache Software Foundation (

This product includes software developed by the Apache Software Foundation ( The information in this manual is subject to change without prior notice and does not represent a commitment on the part of MSE. MSE makes no representations or warranties with respect to the contents

More information

Sage Abra Suite. Installation Guide

Sage Abra Suite. Installation Guide Sage Abra Suite Installation Guide 2011 Sage Software, Inc. All rights reserved. Sage, the Sage logos, and the Sage product and service names mentioned herein are registered trademarks or trademarks of

More information

eb ProjectWise Connection Services

eb ProjectWise Connection Services eb ProjectWise Connection Services INSTALLATION & ADMIN GUIDE D003483 rev 2.0 TRADEMARK NOTICE Bentley and the "B" Bentley logo are registered or non-registered trademarks of Bentley Systems, Inc. or Bentley

More information