Document Revision CSSIR 03/07

Transcription

1 i-rack User Manual Dcument Revisin CSSIR 03/07

2 Cpyright and Trademark 2004, Cmputer Supprt Systems All rights reserved. N part f the cntents f this manual may be transmitted r reprduced in any frm r by any means withut the written permissin f Cmputer Supprt Systems. Cmputer Supprt Systems reserves the right t make changes and imprvements t its prducts withut prviding ntice. Ethernet is a trademark f XEROX Crpratin. Cmputer Supprt Systems Pty Ltd. Head Office: 373 Jhnstn Street Abbtsfrd VICTORIA 3067 Australia Telephne: Facsimile: Web Address: - sales@csspl.cm.au supprt@csspl.cm.au The i-rack range f prducts are designed and manufactured by Cmputer Supprt Systems Pty Ltd fr Hallam Manufacturing Pty Ltd. i-rack by Cmputer Supprt Systems CSSIR 03/07

3 Disclaimer and Revisins Operatin f this equipment in a residential area may cause interference in which case the user, at his r her wn expense, will be required t take whatever measures may be required t crrect the interference. Date Revisin Cmments 12/02/2006 CSSIR02/06 NK Revisin A 23/11/2006 CSSIR11/06 NK making dcument universal fr all irack mdels 19/12/2006 CSSSIR12/06 NK add SNMP ntes 05/03/2006 CSSSIR03/07 NK added V2 updates. LCD, Traps, Serial Prt & SMTP i-rack by Cmputer Supprt Systems CSSIR 03/07

4 Declaratin f Cnfrmity Manufacturer s Name & Address: Cmputer Supprt Systems Pty Ltd, 373 Jhnstn Street, Abbtsfrd, Victria 3067, Australia. Prduct Name, Mdel & Versin(s): i-rack (20 Way) ZIR1020, ZIR2020 Versin 1.02 Refer t V1.XX dcumentatin i-rack (6 Way) ZIR4006 Versin 1.00 Refer t V1.XX dcumentatin i-rack (8 Way) ZIRXXX8, Versin 2.00 i-rack by Cmputer Supprt Systems CSSIR 03/07

5 Warranty Cmputer Supprt Systems warrants i-rack - If used in accrdance with all applicable instructins - T be free frm defects in material and wrkmanship fr a perid f ne year frm the date f initial purchase. This warranty is vided if the custmer uses i-rack in an unauthrized r imprper way, r in an envirnment fr which it was nt designed. Warranty des nt apply t nrmal wear r t damage resulting frm accident, misuse, abuse r neglect. i-rack by Cmputer Supprt Systems CSSIR 03/07

6 Table f Cntents COPYRIGHT AND TRADEMARK... I DISCLAIMER AND REVISIONS... II DECLARATION OF CONFORMITY... III WARRANTY...IV 1 INTRODUCTION TO I-RACK ASSUMPTIONS ACCESSING I-RACK VIA WEB INTERFACE INTRODUCTION TO USER GROUPS ADMINISTRATOR GROUP USER GROUP SECURITY ON I-RACK Brwser Credentials Frgtten Passwrd CONTROLLING & VIEWING STATUS OF OUTLETS VIEW STATUS & TOTAL CURRENT CONSUMPTION OF OUTLETS TURNING ON OUTLETS TURNING OFF OUTLETS REBOOTING OUTLETS GLOBAL ON GLOBAL OFF GLOBAL REBOOT ALARMS ON I-RACK MESSAGES LCD TEXT IN ALARM CONDITION SNMP TRAP MESSAGE SERIAL PORT CONNECTION ON I-RACK SERIAL COMMAND TABLE CONFIGURING I-RACK I-RACK DEVICE CONFIGURATION OUTLET CONFIGURATION MANAGE USERS ALARM, CONFIGURATION AND EVENT LOGS ON I-RACK SNMP ON I-RACK INTRODUCTION TO SNMP FEATURES ON I-RACK SNMP IMPLEMENTATION SNMP TRAPS SAMPLES COLDSTART TRAP CURRENT WARNING LEVEL TRAP HARDWARE SPECIFICATIONS TROUBLESHOOTING TECHNICAL SUPPORT i-rack by Cmputer Supprt Systems CSSIR 03/07

7 1 Intrductin t i-rack i-rack is a netwrk based 240V pwer cntrl unit fr cmputer server racks. It allws turning pwered devices n r ff n the server rack just by visiting a webpage & cntrlling the pwer utlet f the device cnnected. The Current lad n i-rack can be mnitred via the web page and the LCD screen. In the case f exceeding user set Current lad threshlds i- Rack has the capability f ntifying the incident via r SNMP traps. i-rack allws viewing the status f the server rack pwer n each individual pwer utlet, allws custm cntrlled timed rebts fr each pwer utlet and adding delays n start-up in the case f a pwer failure allwing certain devices t turn n prir t ther devices in a selected sequence. All this is dne by remtely accessing the device via a web interface. i- Rack als allws viewing the current cnsumptin by all the utlets via the web interface. In the case when netwrk cnnectivity is dwn, as an alternative utlet cntrl access methd, i-rack prvides a serial prt cnnectin t perfrm the fundamental cntrl t yur utlets. When in use, i-rack is a netwrk element n the netwrk, thus it will have its wn IP address. i-rack cmprises an embedded web server. With a standard web brwser installed in almst all cmputers tday, yu can easily view i-rack web pages t mnitr status, cntrl pwer utlets remtely & t view the current cnsumptin. i-rack includes SNMP features where each utlet status r the current cnsumptin can be btained via SNMP GET cmmands, thus allwing mnitring systems t clsely mnitr the pwer f attached devices and the current lading. i-rack can als ntify when Current lad threshlds are met via SNMP Traps. Features Up t 20 web cntrlled pwer utlets. Available in 4,6,8,12,16 & 20 pwer utlet versins t suit yur applicatin. Pwerful embedded micrprcessr driven, with netwrking features. Installed n side f the server rack, thus nt taking any f the rack space. Als available in a rack munt versin fr existing server racks. 2 x rw LCD panel displaying Current lad and systems status. LEDs t indicate utlets that are pwered n. LED t indicate when Current lad threshlds are in jepardy. Remte cnfiguratin and mnitring capabilities. Up t 20 entries each in cnfiguratin, event & alarm lgs. Tw level prtectin in cntrlling. Administratin user and up t three nrmal users with limited grants. Each pwer utlet can be cnfigured individually. SNMP fr btaining device details, utlet status & current cnsumptin. SNMP Traps & SMTP enabled fr ntifying alarm cnditins. (Current lading) Clear status view f each pwer utlet n user interface. Serial prt access t cntrl & view status f utlets Applicatins Allws ttal cntrl n pwer utlets n server racks. Cnfigures device start up sequence in a pwer failure ccasins fr cntrlled pwering up devices. Cntrl yur hme appliances remtely frm the Internet. i-rack by Cmputer Supprt Systems CSSIR 03/07

8 2 Assumptins Cnfigured i-rack netwrk parameters accrding t the Quick Install Guide, and that the IP address f the device is knwn. This manual is t explain hw t use i- Rack nce successfully installed n the netwrk. Yu can find infrmatin n hw t get i-rack n the netwrk in the Quick Install Guide fund n the prduct CD. i-rack by Cmputer Supprt Systems CSSIR 03/07

9 3 Accessing i-rack via Web Interface i-rack web interface can be accessed by visiting the URL using its IP address n a web brwser. Eg: if IP address is , pen web brwser and visit The fllwing welcme page shall be laded. i-rack is DHCP enabled when shipped. It will btain a DHCP address if cnnected t a DHCP enabled netwrk. Use the i-rack Finder sftware tl t btain the DHCP address. i-rack by Cmputer Supprt Systems CSSIR 03/07

10 4 Intrductin t User Grups i-rack has tw effective user grups. Administratr (1 user) User (3 users) Each user grup has different level f grants. 4.1 Administratr Grup The prduct is released with the fllwing user credentials fr the Administratr grup. Username admin Passwrd admin This user is respnsible fr cnfiguring the unit, its users & each utlet. An administratr can als cntrl each utlet & view the status f the server rack. Please cnfigure the secret questin & answer fr administratr. In the case f a frgtten passwrd this set f questin & answer is required t reset the administratin passwrd. The administratr shuld als set different usernames and passwrds fr the user grup. The default User grup credentials are described in the User Grup subheading. T lgin as the administratr, click n Lgin as an Administratr frm the main web page. Enter the administratin username & passwrd, and then click OK. i-rack by Cmputer Supprt Systems CSSIR 03/07

11 4.2 User Grup The prduct is released with the fllwing user credentials fr the User grup Username user1 user2 user3 Passwrd pwd1 pwd2 pwd3 These users are respnsible cntrlling each utlet & viewing the status f the server rack T lgin as a user frm the User grup, click n Lgin as a User frm the main web page. Enter the username and passwrd, then click OK. 4.3 Security n i-rack Brwser Credentials Authenticatin is required t view any f i-rack web pages. i-rack uses basic authenticatin. Once clicking Lgut n the interface, i-rack will lad the fllwing page. i-rack by Cmputer Supprt Systems CSSIR 03/07

12 Click n Clse Windw buttn t lgut frm i-rack. This will clse the windw Changing the Passwrd Only the administratr user can change the passwrds fr bth administratr & user grups. Lg in as the administratr and click n Manage Users n the menu. Set the relevant user credentials frm this menu Frgtten Passwrd A frgtten passwrd fr a user cannt be reset. The administratr shuld prvide the crrect passwrd by lgging in and retrieving the passwrd set fr each user. If the administratr passwrd is frgtten the nly methd t reset the passwrd is t answer the secret questin set by the administratr. Answering this questin crrectly will reset the administratin username and passwrd bth t be admin. PS: Nte fr the administratr: Please ensure that the secret questin & answer is updated when the device is cnfigured. i-rack by Cmputer Supprt Systems CSSIR 03/07

13 5 Cntrlling & Viewing Status f Outlets Bth Administratr and User grups can cntrl each individual pwer utlet. Outlets are cntrlled frm the Outlet Cntrl menu. This is the default page laded when a user lgs in t i-rack. The parameter Sequence Timer is an imprtant parameter fr each utlet and is displayed n this page. The Sequence Timer is a value in secnds hw lng it will take fr an utlet t turn n when the rack is pwered. (Nte: the utlet startup preference has t be setup in such a way that it will turn n) The Sequence Timer will als used when the utlet is rebted. Each utlet will turn ff fr duratin f Sequence Timer + Glbal Rebt Delay. Eg: i-rack has a Glbal Rebt Delay f 30 secnds. Outlet 10 has a Sequence Timer value f 14 secnds. Outlet 10 On Pwer Failure Outlet Startup is selected t be Always On i-rack by Cmputer Supprt Systems CSSIR 03/07

14 When server rack is pwered n: Outlet will be pwered n in 14 secnds When utlet 10 is rebted r glbal rebt is selected utlet 10 will be pwered in 44 secnds. 5.1 View Status & Ttal Current Cnsumptin f Outlets Status can be viewed by bth administratr & user grups. Click n Status Display frm the menu. The current cnsumptin is displayed graphically using a slider bject. The slider bject is clur cded fr easy identificatin fr mnitring ttal current cnsumptin by i-rack. The legend describes the status f each utlet. 5.2 Turning On Outlets Select the utlet & select Turn ON frm the cmb bx frm the cntrl actin clumn. Click the Apply buttn. Multiple utlets are als selectable. Outlets will be turned n nly if they were turned ff. Turning n an already n utlet r a rebting utlet will have n affect. i-rack by Cmputer Supprt Systems CSSIR 03/07

15 5.3 Turning Off Outlets Select the utlet & select Turn OFF frm the cmb bx frm the cntrl actin clumn. Click the Apply buttn. Multiple utlets are als selectable. Outlets will be turned ff nly if they were turned n r while rebting. Turning n an already ff utlet will have nt affect. 5.4 Rebting Outlets Select the utlet & select Rebt frm the cmb bx frm the cntrl actin clumn. Click the Apply buttn. Multiple utlets are als selectable. Outlets will be rebted nly if they were turned n. Rebting an already ff utlet r a rebting utlet will have nt affect. Each utlet will rebt with a delay f Sequence Timer + On Pwer Failure Outlet Startup secnds. 5.5 Glbal On All utlets can be turned n by selecting this ptin. Select Glbal ON and click apply. PS: All utlets that are rebting r turned ff status will turn n. 5.6 Glbal Off All utlets can be turned ff by selecting this ptin. Select Glbal OFF and click apply. i-rack by Cmputer Supprt Systems CSSIR 03/07

16 PS: All utlets that are rebting r turned n status will turn ff. 5.7 Glbal Rebt All utlets can be rebted by selecting this ptin. Select Glbal REBOOT and click apply. PS: All utlets that are turned n & ff status will turn rebt. Each utlet will rebt with a delay f Sequence Timer + On Pwer Failure Outlet Startup secnds. i-rack by Cmputer Supprt Systems CSSIR 03/07

17 6 Alarms n i-rack i-rack has the fllwing alarm cnditins Current lad in Warning cnditin Current lad in Alarm cnditin Current lad in Critical cnditin Current lad in Nrmal cnditin ( clearance f an alarm) In the case f any f these cnditins ccur, i-rack can be cnfigured t ntify the user via SNMP traps & via . The frnt panel LCD display shall als indicate if in alarm cnditin. An blinking red LED will als attract attentin Messages Cnfigure Alarm threshlds fr the Current lad by ging int the Alarm Cnfiguratin menu item. Cnfigure the Current Warning, Alarm & Critical levels in milliamperes here. By ticking the Send check bx, the system shall send s t the addresses set under i-rack cnfiguratin. 6.2 LCD Text in Alarm Cnditin i-rack by Cmputer Supprt Systems CSSIR 03/07

18 Cnditin System is OK Current Lad in Warning cnditin Current Lad in Alarm cnditin Current Lad in Critical cnditin LCD Text Lad: X.XXXA All s Well!!! Lad Warning X.XXXA!!! Lad Alarm X.XXXA!!! Lad Critical X.XXXA 6.3 SNMP Trap Message i-rack by Cmputer Supprt Systems CSSIR 03/07

19 7 Serial Prt Cnnectin n i-rack i-rack prvides a RS232 cnnectin (EIA-561 RJ45 type) t cntrl the utlets and t btain the Current lad independent frm the netwrk. The serial prt will perate nly if enabled. The device has the fllwing settings by default. Serial Prt is enabled 9600 Baud rate 8 Data bits N parity 1 stp bit N flw cntrl When cnnected i-rack has the fllwing acceptable cmmands status <utlet# [cmmand]> <cur> utlet# = 1-8 cmmand = 'ON', 'OFF', 'REBOOT' 7.1 Serial Cmmand Table Cmmand Descriptin Pssible Serial Respnse status X status X ON status X OFF status X REBOOT status all ON status all OFF status all REBOOT status CUR Cmmand t retrieve utlet status f utlet X (cnditin: 0<X<8) Cmmand t turn utlet X ON (cnditin: 0<X<8) Cmmand t turn utlet X OFF (cnditin: 0<X<8) Cmmand t rebt utlet X (cnditin: 0<X<8) Cmmand t turn all utlets n Cmmand t turn all utlets ff Cmmand t rebt all utlets Cmmand t btain Current lad Outlet X = ON Outlet X = OFF Outlet X = REBOOTING Outlet X = STARTING UP Current Lad = 3.267A If utlet ID is invalid the system shall prvide with respnse: Errr: Outlet>8. Try again i-rack by Cmputer Supprt Systems CSSIR 03/07

20 8 Cnfiguring i-rack Only the administratin user can cnfigure i-rack. The fllwing can be cnfigured: i-rack device cnfiguratin, includes SNMP, Serial Prt, SMTP & Current Lad threshld cnfiguratin Lading defaults n Outlet cnfiguratin Manage users Clear alarm, cnfiguratin and event lgs Each f the abve shall be described in the fllwing sectins. 8.1 i-rack Device Cnfiguratin The fllwing can be set by clicking n i-rack Cnfiguratin : Device settings Netwrk interface settings SMTP Settings SNMP cmmunity & Netwrk Manager cnfiguratin Serial prt settings Date & time f i-rack Lading factry defaults There is als an ptin that allws rebting the server rack fully. PS: nte that all utlets will be tuned ff and then each utlet will perate as set as each utlets start up preference. Device Settings Allws setting a device name & a lcatin fr i-rack. Enter apprpriately and click Apply. Netwrk Interface Settings Allws setting the netwrk parameters fr i-rack. Allws selecting the bt up preference. I.e.: DHCP r Static. If DHCP is selected the netwrk parameters entered will be ignred. Within 60 secnds (page needs t be requested after 60 secnds) these fields shall be updated with the DHCP btained IP address. Enter apprpriately and click Apply. If a DHCP server is nt detected, i-rack sets in with a fall back IP address as described belw: Fall back IP address: i-rack by Cmputer Supprt Systems CSSIR 03/07

21 Fall back subnet mask: Fall back gateway: SMTP Settings ( Settings) Allws setting the SMPT mail server address and the addresses that messages are sent t when in alarm cnditin. All addresses are sent an when in alarm cnditin. If yur mail server requires authenticatin tick the Enable Authrisatin check bx & prvide the username and passwrd fr SMTP authenticatin. SNMP Settings Allws setting the read/write SNMP cmmunities n i-rack and the Netwrk managers fr receiving trap ntificatins. All Netwrk Manger IP addresses shall be sent with a trap when i-rack is in an alarm cnditin as well as the clearance f the alarm. Lading Factry Defaults The fllwing actin is perfrmed: User accunts, credentials, secret questin & answer are set back t defaults. Device name & lcatin shall be reset. Each utlet name, ID, sequence timer, preference f startup & glbal rebt timer values are reset. SMTP, SNMP, Serial prt settings are set back t default Alarm, cnfiguratin & event lgs shall be cleared. Netwrk settings r present utlet status will nt be affected. Thugh, when server rack is pwered n the next time, the default preference (ALWAYS ON) f utlets shall be used, hence all utlets will be pwered n. i-rack by Cmputer Supprt Systems CSSIR 03/07

22 8.2 Outlet Cnfiguratin Click n Outlet Cnfiguratin : The first utlet cnfiguratin page will be laded. T cnfigure each utlet click n the buttn displayed with the ID s f utlets. Set the name f the pwer utlet, the ID f the utlet (ptinal), sequence timer value in secnds & the startup preference & click Apply. The Glbal Rebt Delay can be set while setting any f the utlets. PS: nte that this is cmmn t all utlets. 8.3 Manage Users Click n Manage Users t cnfigure user credentials. User grup credential fr all three users shall be displayed. The administratr passwrd can nly be changed by entering the present administratr passwrd nly. The secret questin & answer fr administratr shuld be set here. 9 Alarm, Cnfiguratin and Event Lgs n i-rack i-rack stres internal lg entries fr each alarm, event and cnfiguratin change that ccurs. These are three separate lgs with up t 20 entries f each. When the lg reaches mre than 20 entries, the ldest entry is remved and the latest entry is added. Therefre, at any given time it is able t review the last 20 entries f alarms and events. T keep a recrd f the alarms and events, it is recmmended t print f the table r cpy and paste the table t a file (eg: t Ntepad) frequently. Each lg entry cnsist a time stamp and a descriptin f the alarm, event r the cnfiguratin. i-rack by Cmputer Supprt Systems CSSIR 03/07

23 The cnfiguratin lg can be viewed nly by the administratr user grup. The administratr can als clear bth types f lgs by clicking the Clear Lg buttn. A user frm the User grup can nly access the event lg. The cnfiguratin lg will nt be accessible by this user. Sample f the Event Lg Sample f the Cnfiguratin Lg i-rack by Cmputer Supprt Systems CSSIR 03/07

24 10 SNMP n i-rack 10.1 Intrductin t SNMP Features n i-rack i-rack is a SNMP (Simple Management Netwrk Prtcl) agent. The current status f any utlet & the ttal current cnsumptin can be retrieved via SNMP plling techniques. i-rack at has trap sending capability when in alarm cnditin. The exceeding f the Current lad shall sent SNMP traps t the Netwrk Manager IP addresses SNMP Implementatin i-rack supprts the SNMP System grup in the MIB-II Objects SysDescr, sysobjectid, sysuptime, syscntact & sysname. The private MIB (Management Infrmatin Base) implements the fllwing bjects: Object Descriptin devicename i-rack Device Name Parameter devicelcatin i-rack Device Lcatin Parameter ipaddr i-rack IP Address sysdescriptin i-rack Descriptin mdelnumber i-rack Mdel Number utletxx i-rack Outlet XX Status 00 = OUTLET OFF 01 = OUTLET ON 02 = OUTLET REBOOTING 03 = STARTING UP currentcnsumed i-rack ttal current cnsumptin. This value is in ma irackmessagestring Message giving mre detailed infrmatin n alarms/alerts/ntificatins n irack irackcurrentalarm Alarm fr Current Lad Sensr 0 = level OK 1 = level at warning level 2 = level at alarm level 3 = level at critical level Refer t the file CSS.MIB in yur prduct CD-ROM under the flder MIB fr further details n the Management Infrmatin Base. The latest CSS.MIB is als available at i-rack by Cmputer Supprt Systems CSSIR 03/07

25 10.3 SNMP Traps Samples Cldstart Trap Current Warning level Trap i-rack by Cmputer Supprt Systems CSSIR 03/07

26 11 Hardware Specificatins Netwrk Interface RJ45 Ethernet 10Base-T, Realtek Semicnductrs LED indicatin: 10Base-T TX Activity, Full/half duplex. Netwrk Cmpatibility: Ethernet: Versin 2.0/IEEE i-rack Operating Cnditins Temperature range: -20 C t +70 C Humidity range: 5-95%, nn cndensing Pwer Requirements & Specificatins Input pwer: 240V A/C 50-60Hz Current usage: 380 ma Ttal utlet supply: 16A rated. (mdel dependant) LCD Panel Specificatins 2 x 12 char LCD i-rack by Cmputer Supprt Systems CSSIR 03/07

27 12 Trubleshting 12.1 Technical Supprt Fr any technical difficulties cntact CSS technical supprt at: Telephne: Fax: Please have the fllwing details when yu cntact CSS technical staff: Mdel f prduct with sftware versin. Serial number (Label n back panel r frm the main menu display) Date f purchase Clear definitin f prblem Steps taken s far t fix prblem i-rack by Cmputer Supprt Systems CSSIR 03/07