Setting up on an iphone

Transcription

1 Setting up on an iphone This tutorial will show you how to set up your on your iphone. Note: If you are using the recommended Gmail option, you will need to download and use the 'Gmail' app instead. It is free and can be downloaded from the Android Marketplace or the Apple Appstore. 1. If this is the first account you're setting up on the iphone, tap Mail. Otherwise, from the Home screen choose Settings > Mail, Contacts, Calendars > Accounts and choose Add Account 2. Click on Mail, Contact and Calendar on the settings page. 1 / 10

2 3. Click on Add Account. 2 / 10

3 4. Scroll down the page a little and then Click Other 3 / 10

4 5. Click Add Mail Account 4 / 10

5 6. Enter in your information: Name: Type in your name as you wish others receiving s from you to see it. Under , type in your address. For example, if your website (domain) name is and the address is named info you would use Password: Enter your password for the address. Description: Enter a description. Below, the website name has been used. If you are setting up multiple addresses of your website on your phone, name them appropriately so you can identify each. Eg, "info@" or "example@". Below is an example of a setup. You should have something Like the below, but have no references to Magicdust. Any reference to Magicdust should be replaced with your website name. 5 / 10

6 7. Allow your phone some time to connect and verify the details. This may take up to a minute to do or longer depending on the speed of your connection. 6 / 10

7 8. Once it has verified your details, you should see the below page. Here you will need to enter the following information: Under 'Host Name', type in your incoming mail server. This will be in the format of mail.mydomain.com.au where mydomain is your website address. Under 'User Name', please enter your address here. Address and User Name should be identical. Your password should already be filled out from when you entered it in earlier. If not, go ahead and enter in your address password. 7 / 10

8 9. Enter your Outgoing Mail Server under Host Name. Host Name: mail.yoursitename.com.au where YourSiteName is replaced with your actual website name. For example, would be mail.google.com.au User Name: This should be Identical to the address you're setting up. Eg, as shown below. So if you used earlier, you would use that here as well. Password: The password allocated to your address. Click Save. 8 / 10

9 10. You may see the below message show up. If so, just cick 'Continue'. 9 / 10

10 Powered by TCPDF ( Once this is done, you should start receiving s from your account. When you first send an from your account through your website server, instead of through the usual setup through your phone provider internet connection, you may receive the above message again. Click 'Continue' whenever this comes up. This should not happen often, unless you routinely power off your phone (or let it's battery run out completely and requires recharging). This is not impacted by pressing the lock button on the top of your phone. If you have any issues with sending or receiving s through your server, please us at or if your only address is down, call us on (option 3 for support) so we can troubleshoot the issue for you. Article ID: 455 Last updated: 24 Dec, Support -> Setting up on an iphone 10 / 10