Airplane Propeller. Click Show All from the Zoom Control at the right end of the Timeline.
|
|
- Laura Reynolds
- 6 years ago
- Views:
Transcription
1 Flash Chapter 10 A. Open your "airplane path" file. Step 1. Open your airplane path file. B. Move Propeller Off Fuselage. Airplane Propeller Step 1. Click Edit Symbols Button at the right end of the Timeline, then click airplane, Fig 1. Fig. 1 Click Show All from the Zoom Control at the right end of the Timeline. Click the Arrow Tool in the toolbar. Hold down the Shift key on the keyboard and "Shift click" all parts that make up the prop, Fig 2. Move the prop to the right off the fuselage Fig. 3. Fig. 2 C. Save File As airplane propeller. Step 1. Click File Menu > Save As. Key-in airplane propeller for the filename and press ENTER. Fig. 3 D. Repair Fuselage. Step 1. Use the Pencil Tool, Line Tool and the Arrow Tool to repair the lines. Use the Dropper Tool and Paint Bucket Tool to repair the fuselage color, Fig. 5. E. Create Prop Symbol. Fig. 4 Step 1. Use the Arrow Tool and make a selection around the prop. Fig. 5 Click Modify Menu > Convert to Symbol. Key-in prop for the Name in the Convert To Symbol Panel. FLASH Airplane Propeller Page 10-1 Fig. 6
2 Click Graphic for the Behavior and click OK. F. Delete One Prop Blade. Step 1. Click Edit Symbols Button at the right end of the Timeline, then click prop, Fig 7. Fig. 7 Click Show All from the Zoom Control at the right end of the Timeline. Fig. 8 Delete one of the prop blades, Fig 8. G. Move Hub to New Hub Layer. Step 1. Double click Layer 1's name located just to the left of the Timeline and key-in blades for the new layer name and press ENTER, Fig 9. Fig. 9 Click the Insert Layer button at the bottom of the Timeline, Fig 10. Double click Layer 2's name located just to the left of the Timeline and key-in hub for the new layer name and press ENTER, Fig 10. Fig. 10 Click the Arrow Tool in the toolbar. Shift click all part of the hub to select it, Fig 11. Click Edit Menu > Cut. Fig. 11 Step 7. Click the hub layer to make the layer active, Fig 12. Step 8. Click Edit Menu > Paste in Place. The hub is now on its own layer. Fig. 12 Step 9. Click in the Hide/Show Layer column, the black dot of hub layer to hide the hub layer. The Hide Layer icon will appear, Fig. 12. H. Copy/Paste Matching Blades. Step 1. Click the Arrow Tool in the toolbar. Make a selection around the blade, Fig. 13. Fig. 13 FLASH Airplane Propeller Page 10-2
3 Click Edit Menu > Copy. Click Edit Menu > Paste in Place. Display the Transform Panel, use Ctrl-T. Key-in 180 for Rotate and press ENTER, Fig. 14 and Fig. 15. Fig. 14 Fig. 15 Use the Arrow Tool and align the ends of the two blades. Make sure the + symbol is in the center of the blades, Fig. 16. I. Create Blades Symbol. Step 1. Click Edit Menu > Select All. Fig. 16 Click Modify Menu > Convert to Symbol. Key-in blades for the Name in the Convert To Symbol Panel. Click Graphic for the Behavior and click OK. J. Tween 9 Frames. Step 1. Right click frame number 9 of the blades layer and click Insert Keyframe from the menu, Fig. 17. Fig. 17 Right click frame number 3 of the blades layer, Fig. 18 and click Create Motion Tween from the menu. Right click frame number 3 of the blades layer and click Insert Keyframe from the menu, Fig. 19. Key-in 120 for Rotate in the Transform Panel and press ENTER, Fig. 20 and Fig. 21. Fig. 18 Fig. 19 Fig. 20 FLASH Airplane Propeller Page 10-3 Fig. 21
4 Step 7. Right click frame number 6 of the blades layer and click Insert Keyframe from the menu, Fig. 22. Key-in 240 for Rotate in the Transform and press ENTER, Fig. 23 and Fig. 24. Click Control Menu > Loop Playback. Fig. 22 Step 8. Click the Play Button in the Control toolbar. K. Remove Delay in Rotation. There's a delay at the beginning/end of the animation. That's because both frame 1 and frame 9 are at the same position. Here's the fix. Remove frame 9 but first insert a Keyframe at frame 8. Fig. 23 Fig. 24 Step 1. Right click frame number 8 of the blades layer and click Insert Keyframe, Fig. 25. Right click Keyframe 9 of the blades layer and click Remove Frames Fig. 26. Fig. 25 Click in the Hide Layer Icon of hub layer to unhide the hub layer, Fig. 27. The hub doesn't have any frames so it can't be seen beyond frame 1. Right click frame number 8 of the hub layer and click Insert Frame, Fig. 27. Move the hub to center on the blades. Fig. 26 Click the Play Button in the Control toolbar. Fig. 27 Fig. 28 FLASH Airplane Propeller Page 10-4
5 L. Adjust Prop in Airplane Symbol. Step 1. Click Edit Symbols Button at the right end of the Timeline, then click airplane, Fig 29. Click Show All from the Zoom Control at the right end of the Timeline. Fig. 29 Use the Arrow Tool to move the prop into position, Fig 30. Right click frame number 8 of layer 1 and click Insert Frame, Fig. 31. Click Scene 1 Button at the top left end of the Timeline to return to the scene. (Ctrl-E). Fig. 30 Fig. 31 FLASH Airplane Propeller Page 10-5
Drum Kit A. Setup to Trace Bitmap. Step 1. Click Window Menu > Other Panels > Common Libraries > Drumkit.
Flash Chapter 20 Drum Kit A. Setup to Trace Bitmap. Step 1. Click Window Menu > Other Panels > Common Libraries > Drumkit. Find drum kit.jpg in the list of symbols in the Library Window. Drag the file
More informationMacromedia Flash. ( Macromedia Flash) : - - Flash. Flash. 10. ( Frame ) . Motion Tween. . Flash
Macromedia Flash ( Macromedia Flash).... : 233 - Ram - 16 64 600 - - Flash. Flash... Flash... Flash player Flash.. Flash Flash. Flash. Tweening 10. ( Frame ). Flash (10 1 ). Motion Tween :. Flash. Flash
More informationPropeller. Chapter 13. Airplane. A. Base for Blade. Step 1. Click File Menu > New, click Part and OK.
Chapter 13 Airplane Propeller A. Base for Blade. Step 1. Click File Menu > New, click Part and OK. Step 2. Click Top Plane in the Feature Manager and click Sketch toolbar, Fig. 1. from the Content Step
More information-Remember to always hit Command + S every time you make a change to your project going forward.
-Open Animate -Under Create New - Select ActionScript 3.0 -Choose Classic as the Design type located in the upper right corner -Animate workspace shows a toolbar, timeline, stage, and window tabs -From
More informationFig. 1. Fig. 1. on the Standard Views toolbar. SolidWorks ASSEMBLY AIRPLANE Page 8-1
Chapter 8 Airplane Assembly A. Insert Set of Parts. Step 1. Click File Menu > New, click Assembly and OK. Step 2. Click View Menu > Origins to display the origin. Step 3. Click Keep Visible in the Property
More informationDrawing. Chapter 10. Airplane. A. Insert Right View. Step 1. Click File Menu > New, click Drawing and OK.
Chapter 10 Airplane Drawing A. Insert Right View. Step 1. Click File Menu > New, click Drawing and OK. Step 2. Click Model View on the View Layout toolbar. Step 3. Click Browse in the Property Manager.
More informationAirplane Drawing. Chapter 10. A. Insert Right View. Step 1. Click File Menu > New, click Drawing and OK.
Chapter 10 Airplane Drawing A. Insert Right View. Step 1. Click File Menu > New, click Drawing and OK. Step 2. Click Model View on the View Layout toolbar. Step 3. Click Browse Step 4. Select your AIRPLANE
More informationAnimating Dialogue using the "Mouth Comp" method
Animating Dialogue using the "Mouth Comp" method Always use symbols There are many ways to go about animating dialogue in Flash. The most logical methods all take advantage of reusing symbols of different
More informationAnimating the Page IN THIS CHAPTER. Timelines and Frames
e r ch02.fm Page 41 Friday, September 17, 1999 10:45 AM c h a p t 2 Animating the Page IN THIS CHAPTER Timelines and Frames Movement Tweening Shape Tweening Fading Recap Advanced Projects You have totally
More informationGETTING AROUND STAGE:
ASM FLASH INTRO FLASH CS3 is a 2D software that is used extensively for Internet animation. Its icon appears as a red square with a stylized Fl on it. It requires patience, because (like most computer
More informationAdobe Animate Basics
Adobe Animate Basics What is Adobe Animate? Adobe Animate, formerly known as Adobe Flash, is a multimedia authoring and computer animation program. Animate can be used to design vector graphics and animation,
More informationFuselage and Sharks Tooth
Chapter 4 Glider Fuselage and Sharks Tooth A. Save as "FUSELAGE". Step 1. Open your FUSELAGE BLANK file. Step 2. Click File Menu > Save As. Step 3. Key-in FUSELAGE for the filename and press ENTER. B.
More informationRAVASMARTSOLUTIONS - TECH TIPS
RAVASMARTSOLUTIONS - TECH TIPS Purpose CS5 - Flash - Build a Banner Animation This Tech Tip will illustrate how to build a basic banner animation using Flash. Please build your Flash Image library before
More informationUsing Flash Animation Basics
Using Flash Contents Using Flash... 1 Animation Basics... 1 Exercise 1. Creating a Symbol... 2 Exercise 2. Working with Layers... 4 Exercise 3. Using the Timeline... 6 Exercise 4. Previewing an animation...
More informationanimation, and what interface elements the Flash editor contains to help you create and control your animation.
e r ch02.fm Page 43 Wednesday, November 15, 2000 8:52 AM c h a p t 2 Animating the Page IN THIS CHAPTER Timelines and Frames Movement Tweening Shape Tweening Fading Recap Advanced Projects You have totally
More informationName: Date: Multimedia Graphics and Web Publishing Mr. Dietzler. Flash Topics TWEENING AND MOTION GUIDES
Name: Date: Multimedia Graphics and Web Publishing Mr. Dietzler Flash Topics TWEENING AND MOTION GUIDES TWEENING: Motion Tweening: The most basic type of tweening is Motion Tweening in which you specify
More informationDelta Dart. Propeller. in the Feature Manager and click Sketch from the Content toolbar, Fig. 1. on the Sketch toolbar.
Chapter 8 Delta Dart Propeller A. Base for Blade. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Top Plane in the Feature Manager and click Sketch from the Content toolbar, Fig.
More informationAirplane Assembly. SolidWorks 10 ASSEMBLY AIRPLANE Page 9-1
Chapter 9 A. Insert Parts. Airplane Assembly Step 1. Click File Menu > New, click Assembly and OK. Step 2. Click Keep Visible in the Property Manager, Fig. 1. Step 3. Click Browse in the Property Manager,
More informationGeneral Directions for Creating a Program with Flash
General Directions for Creating a Program with Flash These directions are meant to serve as a starting point for a project in Flash. With them, you will create four screens or sections: 1) Title screen;
More informationGetting Started. Moving Around in 3D
Getting Started 1 Double-click the SketchUp icon or click: Start All Programs SketchUp 2018 SketchUp 2018 The start screen should look something like this: This person is about 5 5 tall this sets the scale
More informationGetting Started. Double-click the SketchUp icon or click: Start All Programs SketchUp 2018 SketchUp 2018
Getting Started 1 Double-click the SketchUp icon or click: Start All Programs SketchUp 2018 SketchUp 2018 The start screen should look something like this: This person is about 5 5 tall this sets the scale
More informationBASICS OF MOTIONSTUDIO
EXPERIMENT NO: 1 BASICS OF MOTIONSTUDIO User Interface MotionStudio combines draw, paint and animation in one easy easy-to-use program gram to save time and make work easy. Main Window Main Window is the
More informationBasics of Flash Animation
Basics of Flash Animation The Stage is where you do your main design work The timeline is where you animate your objects by setting keyframes The library is where you store all your assets things you use
More informationWebtorial: 2-Point Tracking
This webtorial will show you how to use 2-point tracking to attach a missing arrowhead to its clock hand and track the hand s movement to ensure that the arrowhead stays on its hand as it rotates. You
More informationFlash Tutorial. Working With Text, Tween, Layers, Frames & Key Frames
Flash Tutorial Working With Text, Tween, Layers, Frames & Key Frames Opening the Software Open Adobe Flash CS3 Create a new Document Action Script 3 In the Property Inspector select the size to change
More informationThe playhead, shown as a vertical red beam, passes each frame when a movie plays back, much like movie fi lm passing in front of a projector bulb.
The project: AIRPLANE I will show you a completed version of this project.. Introducing keyframes and the Timeline One of the most important panels in the Flash workspace is the Timeline, which is where
More informationAnimation and Mechanization Tutorial
Animation and Mechanization Tutorial Animation v. Mechanization Animation: Allows the operator to move the standard assembly constraints Distance (Mate, Align and Offset) taking periodic snapshots of the
More informationAnimation is the illusion of motion created by the consecutive display of images of static elements. In film and video
Class: Name: Class Number: Date: Computer Animation Basis A. What is Animation? Animation is the illusion of motion created by the consecutive display of images of static elements. In film and video production,
More informationPhotoView 360 Decals
Chapter 10 Glider PhotoView 360 Decals A. Enable PhotoView 360. Step 1. If necessary, open your GLIDER ASSEMBLY file. Step 2. If necessary, turn on PhotoView 360. Click Tools Menu > Add- Ins. Click to
More informationINSRUCTION SHEET. Flash Lab #1
Advanced Web Page Design STANDARD 5 The student will use commercial animation software (for example: Flash, Alice, Anim8, Ulead) to create graphics/web page. Student Learning Objectives: Objective 1: Draw,
More informationDrawing. Chapter 12. Beam. A. Insert Views. Step 1. Click File Menu > New, click Drawing and OK. Step 2. Click Model View. on the View Layout toolbar.
Chapter 12 Beam Drawing A. Insert Views. Step 1. Click File Menu > New, click Drawing and OK. Step 2. Click Model View on the View Layout toolbar. Step 3. Click Browse in the Property Manager. Step 4.
More informationAirplane. Chapter 21. Mastercam A. Create Rectangle. B. Save As AIRPLANE. C. Set Grid and Snap.2. Mastercam 2017 Airplane Page 21-1
Mastercam 2017 Chapter 21 A. Create Rectangle. Airplane Step 1. If necessary start a new Mastercam file, click New on the Quick Access Toolbar QAT (Ctrl-N). Step 2. On the Wireframe tab click Rectangle.
More informationBasic Operation of Flash MX Professional 2004
Basic Operation of Flash MX Professional 2004 (Main Tutorial) This Tutorial provides you Basic Operation for Flash MX Professional 2004. After this training, you will be able to create simple animation.
More informationShape Tweening. Shape tweening requirements:
Shape Tweening Shape Tweening Shape tweening requirements: Vector-based objects No grouped objects No bitmaps No symbols No type, type must be broken apart into a shape Keyframes concept from traditional
More informationSequencing Traditional Lights in ShowTime 5 Originally presented at Christmas Expo 2017
Sequencing Traditional Lights in ShowTime 5 Originally presented at Christmas Expo 2017 1 ShowTime 5: Requirements License levels remain the same as previous Light-O-Rama software versions If your license
More informationAdobe Flash CS4 Part 2: Working with Symbols
CALIFORNIA STATE UNIVERSITY, LOS ANGELES INFORMATION TECHNOLOGY SERVICES Adobe Flash CS4 Part 2: Working with Symbols Fall 2010, Version 1.0 Table of Contents Introduction...2 Downloading the Data Files...2
More informationStep 6: Create the butterfly body Repeat steps 4 and 5 to trace and create a butterfly body Convert the image into a graphic (F8), call it gr_body
Tutorial 10: Tracing An Image And Animating A Butterfly Learn how to - Trace an image to create a realistic drawing - Create an animated and static butterfly Step 1: Set up the page Open Flash and resize
More informationToon Boom Harmony 14.0 Essentials Edition Keyboard Shortcuts
Toon Boom Harmony 14.0 Essentials Edition Keyboard Shortcuts Legal Notices Toon Boom Animation Inc. 4200 Saint-Laurent, Suite 1020 Montreal, Quebec, Canada H2W 2R2 Tel: +1 514 278 8666 Fax: +1 514 278
More informationDigital Documentaries Premiere Elements 8
Premiere Elements 8 Creating a new project Select New Project In the Premiere welcome screen and go to File, New Project on the top menu. Type in a project name and select Browse to locate the Desktop
More information1. Multimedia authoring is the process of creating a multimedia production:
Chapter 8 1. Multimedia authoring is the process of creating a multimedia production: Creating/assembling/sequencing media elements Adding interactivity Testing (Alpha/Beta) Packaging Distributing to end
More informationWheels and Axle. Chapter 7. Simples Machines. A. Save As. Step 1. If necessary, open your Track Assembly 15 file. B. Insert Truck Assembly.
Chapter 7 Simples Machines Wheels and Axle A. Save As. Step 1. If necessary, open your Track Assembly 15 file. Step 2. Click File Menu > Save As. Step 3. Key-in WHEELS AND AXLE ASSEMBLY for the filename
More informationFlow Sim. Chapter 14 P-51. A. Set Up. B. Create Flow Simulation Project. Step 1. Click Flow Simulation. SolidWorks 10 Flow Sim P-51 Page 14-1
Chapter 14 A. Set Up. P-51 Flow Sim Step 1. If necessary, open your ASSEMBLY file. Step 2. Click Tools Menu > Add-Ins. Step 3. In the dialog box, scroll down to Flow Simulation and place a check in the
More informationWalk Cycle with Symbols
Walk Cycle with Symbols STEP 1 Assuming you have your character all rigged and ready to go, double click on the character to get into the master symbol to see all the layers that make up all of the character
More informationToon Boom Harmony Essentials V15.0
Essentials Toon Boom Harmony Essentials V15.0 Keyboard Shortcuts Guide TOON BOOM ANIMATION INC. 4200 Saint-Laurent, Suite 1020 Montreal, Quebec, Canada H2W 2R2 +1 514 278 8666 contact@toonboom.com toonboom.com
More informationLegal Notices. Toon Boom Animation Inc Saint-Laurent, Suite 1020 Montreal, Quebec, Canada H2W 2R2. Tel: Fax:
Storyboard Pro 5.5 Keyboard Shortcuts Guide Legal Notices Toon Boom Animation Inc. 4200 Saint-Laurent, Suite 1020 Montreal, Quebec, Canada H2W 2R2 Tel: +1 514 278 8666 Fax: +1 514 278 2666 toonboom.com
More information2Understanding the. Interface. The Document Window 13. If you are new to Flash 8, don t skip this chapter. Although you might be
2Understanding the Interface The Document Window 13 The Timeline 14 The Layer Controls 15 If you are new to Flash 8, don t skip this chapter. Although you might be tempted to jump right in with the hands-on
More informationMaking ecards Can Be Fun!
Making ecards Can Be Fun! A Macromedia Flash Tutorial By Mike Travis For ETEC 664 University of Hawaii Graduate Program in Educational Technology April 4, 2005 The Goal The goal of this project is to create
More informationTail Hook. Chapter 14. Airplane. A. Construction Rectangle. Step 1. Click File Menu > New, click Part and OK.
Chapter 14 Airplane Tail Hook A. Construction Rectangle. Step 1. Click File Menu > New, click Part and OK. Step 2. Click Right (plane) in the Feature Manager and click Sketch from the Content toolbar,
More informationToon Boom Harmony Essentials 16.0
Essentials Toon Boom Harmony Essentials 16.0 Keyboard Shortcuts TOON BOOM ANIMATION INC. 4200 Saint-Laurent, Suite 1020 Montreal, Quebec, Canada H2W 2R2 +1 514 278 8666 contact@toonboom.com toonboom.com
More informationWorking with the Dope Sheet Editor to speed up animation and reverse time.
Bouncing a Ball Page 1 of 2 Tutorial Bouncing a Ball A bouncing ball is a common first project for new animators. This classic example is an excellent tool for explaining basic animation processes in 3ds
More informationIntroduction to Flash - Creating a Motion Tween
Introduction to Flash - Creating a Motion Tween This tutorial will show you how to create basic motion with Flash, referred to as a motion tween. Download the files to see working examples or start by
More informationIntroduction to Multimedia. Adobe Animate CC. Lab Manual
Introduction to Multimedia Adobe Animate CC Lab Manual 2017-18 Semester 1 Table of Contents A. Introduction p. 1 About Animate Understanding the Workspace of Animate B. Getting Started with Animate....
More informationFruit Snake SECTION 1
Fruit Snake SECTION 1 For the first full Construct 2 game you're going to create a snake game. In this game, you'll have a snake that will "eat" fruit, and grow longer with each object or piece of fruit
More informationCO2 Rail Car. Wheel Rear Px. on the Command Manager toolbar.
Chapter 6 CO2 Rail Car Wheel Rear Px A. Sketch Construction Lines. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Front (plane) in the Feature Manager (left panel), Fig. 1. Step
More informationvinodsrivastava.com FLASH
vinodsrivastava.com FLASH 1. What is a Layer? Layer helps us to organize the artwork in your document. When we create a flash document it contain one layer but we can add more. Objects are placed in layer
More informationFlow Sim. Chapter 16. Airplane. A. Add-In. Step 1. If necessary, open your ASSEMBLY file.
Chapter 16 A. Add-In. Step 1. If necessary, open your ASSEMBLY file. Airplane Flow Sim Step 2. Click Tools Menu > Add-Ins. Step 3. In the dialog box, scroll down to Flow Simulation and place a check in
More informationMotion Creating Animation with Behaviors
Motion Creating Animation with Behaviors Part 1: Basic Motion Behaviors Part 2: Stacking Behaviors upart 3: Using Basic Motion Behaviors in 3Do Part 4: Using Simulation Behaviors Part 5: Applying Parameter
More informationTo familiarize of 3ds Max user interface and adapt a workflow based on preferences of navigating Autodesk 3D Max.
Job No: 01 Duration: 8H Job Title: User interface overview Objective: To familiarize of 3ds Max user interface and adapt a workflow based on preferences of navigating Autodesk 3D Max. Students should be
More informationSpring Assembly. in the Begin Assembly Property. on the Standard toolbar and click Add-Ins.
Chapter 2 Spring Assembly A. Create New Assembly. Step 1. Click File Menu > New, click Assembly and OK. Step 2. Click Cancel Manager. in the Begin Assembly Property B. Enable Toolbox Browser. Step 1. If
More informationAO3. 1. Load Flash. 2. Under Create New click on Flash document a blank screen should appear:
AO3 This is where you use Flash to create your own Pizzalicious advert. Follow the instructions below to create a basic advert however, you ll need to change this to fit your own design! 1. Load Flash
More informationF1 Car. Wheel. in the Feature Manager and click Sketch on the Context toolbar, Fig. 1. (S) on the
Chapter 3 F1 Car Wheel A. Sketch Lines. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Front Plane in the Feature Manager and click Sketch on the Context toolbar, Fig. 1. Step 3.
More informationSpeedway. Motion Study. Step 2. If necessary, turn on SolidWorks Motion. To turn on SolidWorks Motion, click Tools Menu > Add-Ins.
Chapter 8 Speedway Motion Study A. Enable SolidWorks Motion. Step 1. If necessary, open your Speedway Assembly file. Step 2. If necessary, turn on SolidWorks Motion. To turn on SolidWorks Motion, click
More informationGAZIANTEP UNIVERSITY INFORMATICS SECTION SEMETER
GAZIANTEP UNIVERSITY INFORMATICS SECTION 2010-2011-2 SEMETER Microsoft Excel is located in the Microsoft Office paket. in brief Excel is spreadsheet, accounting and graphics program. WHAT CAN WE DO WITH
More informationFirst Animated Model Yellow Submarine
Course: 3D Design Title: First Animated Model Yellow Submarine Blender: Version 2.6X Level: Beginning Author; Neal Hirsig (May 2012) First Animated Model Yellow Submarine Most of you are perhaps too young
More informationThe Macromedia Flash Workspace
Activity 5.1 Worksheet The Macromedia Flash Workspace Student Name: Date: Identify the Stage, workspace, Timeline, layers, panels, Tools panel, and Property inspector. The Macromedia Flash Workspace 5-35
More information1.1 Considering for Choosing Layout in SmartArt Graphics
1. SmartArt A SmartArt graphic is a visual representation of your information that you can quickly and easily create, choosing from among many different layouts, to effectively communicate your message
More informationCOMP : Practical 6 Buttons and First Script Instructions
COMP126-2006: Practical 6 Buttons and First Script Instructions In Flash, we are able to create movies. However, the Flash idea of movie is not quite the usual one. A normal movie is (technically) a series
More informationMicrosoft Excel 2010 Linking Worksheets & Workbooks
Microsoft Excel 2010 Linking Worksheets & Workbooks Email: training@health.ufl.edu Web Page: http://training.health.ufl.edu Microsoft Excel 2010: Linking Worksheets & Workbooks 1.5 hour Topics include
More informationBody. Chapter 2. CO2 Rail Car E. A. Save as "BODY RAIL E". Step 1. Open your BLANK file.
Chapter 2 A. Save as "BODY RAIL E". Step 1. Open your BLANK file. Step 2. Click File Menu > Save As. Step 3. Key-in BODY RAIL E for the filename and press ENTER. CO2 Rail Car E Body B. Appearance. Step
More informationLearning Flash CS4. Module 1 Contents. Chapter 1: Getting Started With Flash. Chapter 2: Drawing Tools
Learning Flash CS4 Module 1 Contents Chapter 1: Getting Started With Flash The Flash Start Page...1-1 The Flash Screen...1-2 The Flash Workspace...1-2 The Properties Panel...1-4 Other Panels...1-5 The
More informationAdobe Flash CS3 Reference Flash CS3 Application Window
Adobe Flash CS3 Reference Flash CS3 Application Window When you load up Flash CS3 and choose to create a new Flash document, the application window should look something like the screenshot below. Layers
More informationDrawing. Chapter 11. Bridge. A. Insert Views. Step 1. Click File Menu > New, click Drawing and OK. on the View Layout toolbar.
Chapter 11 Bridge Drawing A. Insert Views. Step 1. Click File Menu > New, click Drawing and OK. Step 2. Click Model View on the View Layout toolbar. Step 3. Click Browse in the Property Manager. Step 4.
More informationExploring the Flash MX 2004 Workspace
1 Chapter Exploring the Flash MX 2004 Workspace COPYRIGHTED MATERIAL This first chapter is a warm-up to prepare you for your Flash MX 2004 adventure. It provides a quick introduction to Flash, and is a
More informationUsing Frame Hold to create photographic effects
System recommendations Documentation Tips and techniques Register your product Software updates Frequently asked questions Contact customer support Using Frame Hold to create photographic effects In this
More informationAdobe Flash Course Syllabus
Adobe Flash Course Syllabus A Quick Flash Demo Introducing the Flash Interface Adding Elements to the Stage Duplicating Library Items Introducing Keyframes, the Transform Tool & Tweening Creating Animations
More informationObject Manipulation and Basic Animation
Object Manipulation and Basic Animation By Immer Baldos This document is a tutorial on basic modeling and animation using Blender version 2.49b. The goals are to create a Windmill using blender s built-in
More informationGETTING STARTED WITH. chapter
1-4283-1963-8_01_Rev4.qxd 6/27/07 1:39 PM Page 1 chapter 1 GETTING STARTED WITH ADOBE FLASH CS3 1. Understand the Adobe Flash CS3 workspace 2. Open a document and play a movie 3. Create and save a movie
More information8 th Grade Animation Exam Study Guide
Name: Period: What is our class website? What day of the week can you come to class during lunch to make up missed work? What does CPU stand for? What type of files are used for audio? What is hardware?
More informationIntroduction to Microsoft Office PowerPoint 2010
Introduction to Microsoft Office PowerPoint 2010 TABLE OF CONTENTS Open PowerPoint 2010... 1 About the Editing Screen... 1 Create a Title Slide... 6 Save Your Presentation... 6 Create a New Slide... 7
More informationNose Cone. Chapter 4. Rocket 3D Print. A. Revolve. Step 1. Click File Menu > New, click Part and OK. SOLIDWORKS 16 Nose Cone ROCKET 3D PRINT Page 4-1
Chapter 4 Rocket 3D Print Nose Cone A. Revolve. Step 1. Click File Menu > New, click Part and OK. Step 2. Click Front Plane in the Feature Manager and click Sketch on the content toolbar, Fig. 1. Step
More informationPhoenix Keyboard Shortcuts R2. New additions are highlighted. Keyboard Shortcuts
New additions are highlighted Keyboard Shortcuts General File Browser Minimize application + D Refresh file list Ctrl + R or F5 Full screen Toggle Tab Cancel Esc Ok and close Return Viewer Undo (redo)
More informationThis is the opening view of blender.
This is the opening view of blender. Note that interacting with Blender is a little different from other programs that you may be used to. For example, left clicking won t select objects on the scene,
More informationAdobe Flash CS4 Part 3: Animation
CALIFORNIA STATE UNIVERSITY, LOS ANGELES INFORMATION TECHNOLOGY SERVICES Adobe Flash CS4 Part 3: Animation Fall 2010, Version 1.0 Table of Contents Introduction...2 Downloading the Data Files...2 Understanding
More informationUser manual Horus Movie Player 1
User manual Horus Movie Player 1 REVISION HISTORY DATE VERSION AUTHOR October 2013 1.0 Bijwoordbeeld tekst en techniek User manual Horus Movie Player 2 1 WORKING WITH THE INSPECTION AND SURVEY SUITE 5
More informationFall Leaves Andrea Mattina
Fall Leaves Andrea Mattina Before starting this project, we need to make sure we are working in millimeters. To change to millimeters, select View from the menu bar and scroll down to View Preferences.
More informationBforartists Reference Manual - Copyright - This page is under Public Domain. Editors
Editors Introduction...2 Hidden menus...2 The Header menu...2 Flip to Top...2 Collapse Menus...2 Hide Editortype menu...3 Maximize Area - Tile Area...3 The editor type menu...3 Area Options...3 Split area...3
More informationAdobe Flash CS4 Part 4: Interactivity
CALIFORNIA STATE UNIVERSITY, LOS ANGELES INFORMATION TECHNOLOGY SERVICES Adobe Flash CS4 Part 4: Interactivity Fall 2010, Version 1.0 Table of Contents Introduction... 2 Downloading the Data Files... 2
More informationMicrosoft Photostory 3 for Windows XP
Microsoft Photostory 3 for Windows XP Open the following URL to download Photostory3 and to learn more about using the program. http://www.microsoft.com/windowsxp/using/digitalphotography/photostory/default.mspx
More informationAnimation Action Buttons
Animation Action Buttons You will learn techniques for drawing graphics and how to make an action button to start your movie. Click the Example link to see what your finished movie will look like: Example
More informationMULTIMEDIA WEB DESIGN
CLASS :: 03 02.09 2018 3 Hours THE AGENDA HOMEWORK 2 REVIEW [ Upload to Comm Arts Server ] :: Upload GIF Face assets to Your PSD Folder [ Inside of Folder> Create Gif Face Folder ] GIF ANIMATION :: File
More informationH Stab and V Stab. Chapter 6. Glider. A. Open and Save as "H STAB". Step 1. Open your STABILIZER BLANK file.
Chapter 6 Glider H Stab and V Stab A. Open and Save as "H STAB". Step 1. Open your STABILIZER BLANK file. Step 2. Click File Menu > Save As. Step 3. Key-in H STAB for the filename and press ENTER. B. Sketch
More informationCO2 Shell Car. Axle Retainer. in the Feature Manager and click Sketch from the Content toolbar, Fig. 1. (L) on the Sketch toolbar. Fig.
Chapter 17 CO2 Shell Car Axle Retainer A. Sketch. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Top Plane in the Feature Manager and click Sketch from the Content toolbar, Fig.
More informationDr.Engrave USER'S MANUAL
Dr.Engrave USER'S MANUAL This document is the operation manual for Dr. Engrave for Windows, a program for plate engraving. Contents Introduction... 4 Operating environment... 5 Overview of Dr.Engrave...
More informationToolpaths for Fuselage
Mastercam 2017 Chapter 18 Chapter 22 23 Airplane Toolpaths for Fuselage Finish Blend A. Hide Top Surface. Step 1. If necessary, open your FUSELAGE file from Chapter 17. Step 2. On the Home tab click Hide/Unhide
More informationMagicInfo VideoWall Author
MagicInfo VideoWall Author MagicInfo VideoWall Author User Guide MagicInfo VideoWall Author is a program designed to construct a VideoWall layout and create VideoWall content by adding various elements
More informationVirtual MODELA USER'S MANUAL
Virtual MODELA USER'S MANUAL Virtual MODELA is a program that simulates the movement of the tool on the screen. Contents Contents Part 1 Introduction 1-1 System Requirements... 4 1-2 Overview of Virtual
More informationHow to create an animated face
Adobe Flash CS4 Activity 5.1 guide How to create an animated face This activity walks you step by step through the process of creating a simple animation by using Adobe Flash CS4. You use drawing tools
More informationSample Hands-On-Training Chapter Review Copy Only Contact Information Notice of Rights Notice of Liability Trademarks
Sample Hands-On-Training Chapter Review Copy Only Copyright 2000-2003 by lynda.com, Inc. All Rights Reserved. Reproduction and Distribution Strictly Prohibited. This electronically distributed Hands-On-Training
More informationPATTERN SEQUENCER GUIDE
PATTERN SEQUENCER GUIDE C O N T E N T S CHAPTER 1 1 Patterns 3 OVERVIEW...4 PATTERN LIST...4 PATTERN MANAGEMENT...4 SAVING PATTERNS...5 LOADING PATTERNS...5 CLEAR ALL...6 CHAPTER 2 2 Frames 7 OVERVIEW...8
More informationThe Timeline records the actions in each Frame. It also allows multiple independent images and actions through Layers.
Using Flash to Create Animated Environments Objectives: Understand the capabilities of Flash Gain a general overview of features and tools Understand layers, text, graphics, animation and buttons Import
More information