DVR Quick Start Manual

Transcription

1 DVR Quick Start Manual 1 Hard disk installation 1.1 Install hard disk 2 Cable Connection 2.1 Make sure the internet cable connected to the recorder before power on.

2 3 Basic operation After connect with monitor, use the mouse to operate the system. 3.1 Login press ok Login; User Name: Admin Password: (blank) Direct press 3.2 Time zone and language setting Toolbar Guide Next 3.3 Network Test If the Network Test failed, please disconnect power adapter to restart the recorder. If still failed, please go to 5.1 Network Setting for instruction.

3 4 Video Recorder Operation 4.1 Toolbar: Right click the mouse for the toolbar Main Menu 2.Guide 3.Play back 4.Record Mode 5.PTZ Control High Speed PTZ 7. 7.Coaxial Control 8.Color Setting 9.Output Adjust 10.Info 4.2 Language setting General Toolbar Main menu General 4.3 Hard disk format. Toolbar Main menu System System HDD Manage Logout 12.Signal 13.View4 14.View9 15.Hide 14 15

4 4.4 Motion detection Main Menu Alarm Motion Motion Detect A: Choose the camera channel and tick Enable to active motion detection. B: Suggest to set the Interval time to 10 seconds. C: According to the camera channel to choose the Record channel. D: Tick Show Message, the monitoring interface will show an alarm message when motion detected. E: Tick Buzzer, recorder buzzer when motion detected. F: Tick Send , system will send you a notice when motion detected. Setting: Go to Mail Menu Network click Net Service double click

5 G: User Name and Sender :Fill in your address and password, must be the same address. Receiver : Fill in the you want to receive notice . Click Mail Testing to test whether the mail setting is correct. Click Ok to save the setting. H: Attentions: To make sure your account you used to send notice work well, need to have a setting in your mailbox. Takes Gmail for example as follow.

6 Go to Gmail Settings Forwarding Forwarding and POP/IMAP POP/IMAP ->POP >POP Download: Select Enable POP for all mail IMAP IMAP Access:Select Enable IMAP IMAP Save changes 4.5 Video playback Go to Toolbar Playback Select date, camera channel, click search Button.

7 4.6 Video backup Insert a USB storage, Go to Main Menu Menu System Backup. A: Click Detect button to search USB storage. B: Select storage and click Backup Backup button. C: Choose camera channel and date and time,click add button to add the video files. D: Select the video files you need and click start button to start backup. If use USB flash stick for backup, maximum capacity of the USB flash stick should be 32G 4.7 IP camera setup. If need to connect IP camera to the video recorder, please go to Main Menu Switch Switch Channel type. Network is IPC channel. A. Local is analog channel, Network B. Select a channel type accordingly. Please try other channel type if connect failed. C. Finish Channel Type setup,restart the system. Then click + on the monitor interface to add IPC. Any question please contact service infrom@bulwark-security.com for help.

8 5 Network Setting 5.1 Before remote monitor,plcase make sure the recorder connects to the network well. Go to Toolbar Info Version Net Net Status If the network connects well,the"net Status" should show "connected. If network failed, "Net Status"shows" Probing DNS". Try disconnect adapter to restart the recorder. Still failed, goto MainMenu Network Network NetLinkMod,Select and click DHCP. Click "OK" to save the setting.

9 5.2 Mobile Mobile Phone Remote Monitor A: Goodeye Mobile APP download Go to Toolbar Info Version, Version, use your mobile phone to scan"iphone APP"or"Android APP" QR code to download the Goodeye mobile APP. B:Login. Open the Goodeye app. local login login to the directly. 1. Register account or click local 2. Click + to add device.watch the world together. 3. Scan SN QR code.

10 5.3 Livepreview Click Device and then access to the device and show how many channels it have, click channel which you want to display on screen. see as below pictures: Dear buyer, Thank you choose BULWARK security products. If you have any questions, please kindly CONTACT US FIRST. CERTIFI CATE GUARANTEE Bulwark Technology Add: Shenzhen, Guangdong Province, CHINA Support: Website: Signature: GUARANTEE Date: User name Telephone Address Model Serial number Keep the card for guarantee to keep in repair