HSIP2 User Manual. ios Application Android Application PC Setup
|
|
- Archibald Wade
- 6 years ago
- Views:
Transcription
1 HSIP2 User Manual ios Application Android Application PC Setup Please read all instructions carefully before use to get the most out of your HSIP2 Wireless Surveillance Camera. The design and features are subject to change without notice.
2 General Description Thank you for purchasing the time2 HSIP2 Rotating Surveillance Camera this device is a great way to monitor any part of your office, home or warehouse making sure all your valuables are safe and secure. Please keep this manual for future reference and ensure all safety instructions have been read carefully before using. Applications and their functions may vary by country and/or hardware specification. Important Safety Information Do not install the product outdoors or in any place where it may become wet. Do not install the product in any place that might be exposed to extreme heat or cold the camera should be kept out of direct sunlight. It is not permitted to open the product yourself or to have it opened, neither is it permitted to repair the product yourself or to have it repaired. This will void the warranty. Only use the original accessories from the manufacturer. Disconnect the device from all power sources before cleaning it. Use a clean, dry cloth to clean the product. Do not use any abrasive agents, corrosive cleaning products or any substances that contain bleach or solvents to clean the product. Disconnect the camera whenever the product will not be used for a long period of time. The camera is not able to view through glass. Keep this in mind when positioning it.
3 What comes in the box? HSIP2 HD IP Camera WiFi Antenna Ethernet (internet) Cable DC Supply (power supply) Wall Mounting Brackets User Manual
4 Camera Features 1. Wireless Antenna 2. Motion Detector 3. Infrared LED 4. Camera Lens 5. Network Indicator LED 6. Microphone 7. Loud Speaker
5 1. Headphone Slot 2. Ethernet / RJ45 Port 3. WiFi Antenna 4. Micro SD Card Slot 5. Power Port
6 Video Setup Guide View our Video setup Guide for a fast and easy setup for your camera. Please ensure the subtitles are switched on in YouTube. Visit - or on our website visit the Support section, product downloads and select the HSIP2 HD Wireless Surveillance Camera. Connecting the Camera 1. Screw the WiFi Antenna into the gold screw at the back of the camera. 2. Plug the power adapter into the port at the back of the camera. 3. Plug one end of the Network>Ethernet cable into camera and the other end into your Wireless Internet Router. It will take approximately 30 seconds for the camera to power up. 4. Once the power cable and Ethernet cable have been connected, the green LED light will come on.
7 Downloading the App ios Application In order to download the ios application, go to the Apple App Store on your iphone/ipad. Search Netcam then download and install the App. Once the App has been installed onto your iphone/ipad, a shortcut icon will appear on your App list. Simply click to open.
8 Camera Setup In Order to setup your camera onto your iphone/ipad, click Add device on the App interface. The following screen will be displayed: You can set the camera up by either scanning the QR Code or Via the LAN Search.
9 LAN Search Click on this which will allow the iphone/ipad to search the WiFi network that it is connected to and detect any Cameras that are also connected the same Wifi network. The following screen will appear: Simply click onto the camera you would like to connect to, the camera details will automatically complete. Click Done in the top right corner and the camera will be ready to control. Or, Scan the QR Code Click on this and the applicatoin will use your phone to scan the code found at the bottom of the camera. Scanning the code will automatically complete the camera details. Click Done in the top right corner and the camera will be ready to control.
10 Once you have successfully added the camera to your software it will appear online with an additional message Empty Password. For extra security you will be required to change the Username and Password before you can access the camera. Click on the camera and the following will appear:
11 Click OK and the application will take you through the User Setting section where you can change your Username and Password. Once you have changed the details for the Administrator click Done in the top right corner. The camera will reboot and will re-establish a connection after a couple of minutes. Click on the camera and live feed will appear.
12 Please note: You may find that once you have changed the Username and Password you see the following: This is because the changes you have made for the security need to be improved further. We recommend using a selection of Uppercase and Lowercase Letters and Numbers to ensure you set a secure Username and Password.
13 Camera Controls Simply swipe in any direction to move the camera. Other actions available are below:
14 Settings To view the Settings, simply click on the settings icon on the device homepage. The following screen will appear: Please note when you apply any settings to the camera ensure it is only online on one device. Having the camera online on multiple devices whilst changing settings may cause complications.
15 Wi-Fi Setting Using this setting you can set the camera to function over your wireless network. Please note: When setting the camera up for the first time, it will need to be wired into the internet router first. Click Manage Wi-Fi network to search for networks your camera can connect to. Click on the network you would like the camera to connect to. Enter your network password then click Done in the top right hand corner and remove the Ethernet Cable. The camera will automatically configure itself with the router. Once this is complete the camera will restart and the connection will be established.
16 Alarm Settings Using this setting you can set the camera to send you notifications once the motion and audio has been detected.
17 Motion Detection Ensure this is turned on to activate the motion detection. Whilst the camera is turned on if any movement is detected, the built in motion detector will trigger an alarm. An alert will be sent to your phone. Motion Detection Sensitivity This can be used to adjust the sensitivity of the camera. Please note the lower the number the more sensitive the camera is. Audio Detection Ensure this is turned on to activate the audio detection. Whilst the camera is turned on if any sound is detected, the built in sound detector will trigger an alarm. Audio Detection Sensitivity This can be used to adjust the sensitivity of the camera. Alarm preset position linkage Click the dropdown box and choose a preset position you would like the camera to move too once the motion is detected. Please note you will need to set a preset position for this setting to work. See preset position for more information. Alarm Mail Notification Ensure this is turned on to activate this feature which allows for an notification to be sent as soon as the motion is triggered. Please note you will need to set this up for this to setting to work. See settings for more information. Upload pictures count Activate this feature to receive images once the motion detection alarm has been triggered. Alarm Video Ensure this is turned on for the camera to record a compressed video onto the Micro SD card once the alarm has been triggered.
18 Settings Using this setting you can setup your mailbox to receive notifications when motion has been detected. Sender Enter your address. SMTP Server Select the appropriate SMTP server according to your address. SMTP Port This will automatically fill in once the server has been selected. Verifying Please ensure this is always ticked as some mail servers require authentication to receive s.
19 SMTP User Please enter the SMTP user (in most cases it is the first part of your address) SMTP Password Enter the password to your address. Receiver 1 Enter the address you would like the notification to go to. Once the details have been entered correctly you will receive notifications once the motion is detected. Please note: The camera needs to be connected to the internet at all times for this feature to work. If the SMTP server is not available from the dropdown box please enter the information required manually. Some domains require a further setting to be activated to allow applications to interact with an account. For further information please check the settings of your domain.
20 SD Card Settings When first inserting an SD card, you will be required to format the SD card (simply click the format button). Once formatted, you will be able to select conditions such as Record audio or Timer recording etc. The PC software allows you to specify the times you would like the camera to start recording (see below). Once complete, click the Set button to save the changes.
21 Preset Positions You can preset up to 16 positions for the camera to rotate to using the application. Once set all you have to do is select the number and the camera will rotate to that position. Click on the camera to bring up the live feed. Rotate the camera to the position you would like for a preset to be created. Click the Preset position to bring up the following window. Click on Preset a set and choose any number displayed. This will preset that position to the number you chose. To move the camera to your preset positions click on Preset a call. Once you choose a number the camera will rotate to that preset position
22 User Setting The username and password for the Operator and Administrator can be set and changed by clicking on this tab. Device Time Setting Set the date and time according to your time zone or simply synchronise to your Mobile phone time.
23 Downloading the App Android Application In order to download the Android application, go to the Google Playstore on your Android device. Search NetCam then download and install the App. Once the App has been installed onto your Android device, a shortcut icon will appear on your App list. Simply click to open.
24 Camera Setup In order to setup your camera onto your Android device, click Add device on the App interface. The following screen will be displayed: You can set the camera up by either scanning the QR Code or Via LAN Search.
25 LAN Search Click on this which will allow the Android device to search the WiFi network that it is connected to and detect any cameras that are also connected to the same WiFi network. Simply click onto the camera you would like to connect to, the camera detail will automatically complete. Click Done in the top right corner and the camera will be ready to control. Or, Scan the QR Code Click on this and the application will use your phone to scan the code found at the bottom of the camera. Scanning the code will automatically complete the camera details. Click Done in the top right corner and the camera will be ready to control.
26 Once you have successfully added the camera to your software it will appear online with an additional message Empty Password. For extra security you will be required to change the Username and Password before you can access the camera. Click on the camera and the following will appear:
27 Click OK and the application will take you through the User Setting section where you can change your Username and Password. Once you have changed the details for the Administrator click Done in the top right corner. The camera will reboot and will re-establish a connection after a couple of minutes. Click on the camera and live feed will appear.
28 Please note: You may find that once you have changed the Username and Password you see the following: This is because the changes you have made for the security need to be improved further. We recommend using a selection of Uppercase and Lowercase Letters and Numbers to ensure you set a secure Username and Password.
29 Camera Controls Simply swipe in any direction to move the camera. Other actions available are below:
30 Settings To view the Settings, simply click on the settings icon on the Device. The following screen will appear: Please note when you apply any settings to the camera ensure it is only online on one device. Having the camera online on multiple devices whilst changing settings may cause complications.
31 Wi-Fi Setting Using this setting you can set the camera to function over your wireless network. Please note: When setting the camera up for the first time, it will need to be wired into the internet router first. Click WiFi Manager to search for networks your camera can connect to. Click on the network you would like the camera to connect to. Enter your network password in the password box that appears and click Done in the top right hand corner and remove the Ethernet Cable. The camera will automatically configure itself with the router. Once this is complete the camera will restart and the connection will be established.
32 Alarm Setting Using this setting you can set the camera to send you notifications once the motion and audio has been detected.
33 Motion Detect Armed Ensure this is turned on to activate the motion detection. Whilst the camera is turned on if any movement is detected, the built-in motion detector will trigger an alarm. An alert will be sent to your phone. Motion Detect Sensitivity This can be used to adjust the sensitivity of the camera. Please note the lower the number the more sensitive the camera will be. Audio Input Armed Ensure this is turned on to activate the audio detection. Whilst the camera is turned on if any sound is detected, the built-in sound detector will trigger an alarm. Alarm preset linkage Click the dropdown box and choose a preset position you would like the camera to move too once the motion is detected. Please note you will need to set a preset position for this setting to work. See preset position for more information. Notifications Ensure this is turned on to activate this feature which allows for an notification to be sent as soon as the motion is triggered. Please note you will need to set this up for this to setting to work. See settings for more information. Alarm Video Record Ensure this is turned on for the camera to record a compressed video on the Micro SD card once the alarm has been triggered. Upload Image on Alarm Activate this feature to receive images once the motion detection alarm has been triggered.
34 Setting Using this setting you can setup your mailbox to receive notifications when motion has been detected. Sender Enter your address. SMTP Server Select the appropriate SMTP server according to your address.
35 SMTP Port This will automatically fill in once the server has been selected. Need Check Please ensure this is always ticked as some mail servers require authentication to receive s. SMTP User Please enter the SMTP user (in most cases it is the first part of your address). SMTP Password Enter the password to your address. Receiver 1 Enter the address you would like the notification to go to. Once the details have been entered correctly you will receive notifications once the motion is detected. Please note: The camera needs to be connected to the internet at all times for this feature to work. If the SMTP service is not available from the dropdown box please enter the information required manually. Some domains require a further setting to be activated to allow applications to interact with an account. For further information please check the settings of your domain.
36 SD Card Settings When first inserting an SD card, you will be required to format the SD card (simply click the format button). Once formatted, you will be able to select conditions such as Record audio or Timer recording etc. The PC software allows you to specify the times you would like the camera to start recording (see below). Once complete, click the Set button to save the changes.
37 Preset Positions You can preset up to 16 positions for the camera to rotate to using the application. Once set all you have to do is select the number and the camera will rotate to that position. Click on the camera to bring up the live feed. Rotate the camera to the position you would like for a preset to be created. Click the Preset position to bring up the following window. Click on Preset a set and choose any number displayed. This will preset that position to the number you chose. To move the camera to your preset positions click on Preset a call. Once you choose a number the camera will rotate to that preset position.
38 User Setting The username and password for the Operator and Administrator can be set and changed by clicking on this tab. Time Setting Set the date and time according to your time zone or simply synchronise to your Mobile phone time.
39 Installing the PC Software Visit the following webpage PC Setup Wireless-Surveillance-Camera.html To download the IP Camera for PC software. (Click to download) During download, your Anti-Virus software may bring up an alert, please ignore it and continue to download the software. Once the software has downloaded, double click on the software icon to open. You will then be asked to choose a language.
40 Follow the onscreen instructions to finish the installation of the software (See below):
41 Please ensure the Create a desktop icon option is ticked (see below) so an icon can be created on your desktop for easy access to the software. Once the software has been successfully installed, double click the icon to launch.
42 Camera Setup Open the application as the administrator and the following screen will appear: By default, there is no password allocated to the camera. To log in, simply enter the username (found at the bottom of the camera) then click Login.
43 In order to set up the software, firstly, ensure the camera and computer are connected to the same Internet Router. Click the Plus icon on the top right hand corner of the screen. This will bring up another window, then click Search. This will bring up any cameras connected to that Internet Network. Simply double click on the camera you would like to setup.
44 This will bring up another window (see below). Check the settings then click OK to add the camera to the device list. Please note the initial log in details can be located at the bottom of the camera. In order to view the camera, simply put your mouse over the camera name and click and drag into one of the 4 black windows for the image to appear. Double click on this image to enlarge.
45 Main Features Click on the live feed to bring up the control bar for the camera.
46
47 To view the Settings, simply click on the settings icon next to the camera name.
48 WiFi Settings The wireless settings can be set and changed by clicking on this tab. Please note: When setting the camera up for the first time, it will need to be wired into the internet router first, before the wireless function is activated. Ensure there is a tick in the use WLAN. Click Search to search for existing wireless networks then select the network you would like to connect to. All the information will be automatically filled in except the password for your router. In the Encryption box enter your router password and click Set. Remove the Ethernet cable, and the camera will automatically configure itself with the router. Close down the window and you will see the camera come online using the wireless function.
49 Device Information This gives you all the information about the device, e.g. Firmware version, serial number, Alarm status etc. Date & Time Set the date and time according to your Time Zone or simply synchronise to your PC time. User Settings The username and password for the visitor, operator and administrator can be set and changed by clicking on this tab.
50 Alarm Settings The motion detection settings can be changed by clicking on this tab. Motion Detect Armed Whilst the camera is on, if any movement is detected the built-in motion detector will trigger an alarm. Tick this option to activate this feature. The dropdown box next to this option is for the sensitivity of the motion detection. Please note the lower the number the more sensitive the camera motion detection will be. Alarm Audio Sensitivity Whilst the camera is on, if any sound is detected, this will also trigger the alarm. You are able to change the sensitivity of this feature according to your requirements.
51 Alarm preset linkage Click the dropdown box and choose a preset position you would like the camera to move too once the motion is detected. Please note you will need to set a preset position for this setting to work. See preset position for more information. Alarm video record When the alarm has been triggered, a 30 a short compressed 30 second video will be recorded and saved onto the Micro SD card. Mail notification after alarm Activate this feature to receive an notification as soon as the alarm has been triggered. You will be required to set up alerts for this to work. Ensure Upload image after alarm is ticked to receive images once the motion detection is triggered. This feature will only work once alerts have been set. Alarm armed time Activate this feature to schedule when the alarm setting is on. Alternatively, you could have the alarm setting on all the time. Once you have changed the settings to suit you click Set and the settings will be updated.
52 Settings This setting will set your to receive notifications when motion has been detected. Sender Enter your address. SMTP server Select the appropriate SMTP server according to your address. SMTP Port This will be automatically filled in once the server has been selected. Need verify Please ensure this is always ticked as some mails servers require authentication to receive s. SMTP Details Please enter the correct SMTP Username (First part of your address) and SMTP password (password used for the address).
53 Receiver Finally enter the addresses you would like the notification to go to. Please note The camera needs to be connected to the internet at all times for this feature to work. If your address provider is not available in the SMTP server settings you can still use your address as long as you have the SMTP settings available. Some domains require a further setting to be activated to allow applications to interact with an account. For further information please check the settings of your domain. SD Card Settings The PC software allows you to specify the times you would like the camera to start recording (see below). Once complete, click the Set button to save the changes.
54 Preset Positions You can preset up to 16 positions for the camera to rotate to using the application. Once set all you have to do is select the number and the camera will rotate to that position. Click on the camera to bring up the live feed. Rotate the camera to the position you would like for a preset to be created. Click the Preset position to bring up the following window. Click on Preset a set and choose any number displayed. This will preset that position to the number you chose. To move the camera to your preset positions click on Preset a call. Once you choose a number the camera will rotate to that preset position.
55 Support For further support with setup and if you require any help to make the most of your camera please contact our customer services support team. Connect With Us:
HSIP2 User Manual. ios Application Android Application PC Setup
HSIP2 User Manual ios Application Android Application PC Setup Please read all instructions carefully before use to get the most out of your HSIP2 Wireless Surveillance Camera. The design and features
More informationOutdoor User Manual. ios Application Android Application PC Setup
Outdoor User Manual ios Application Android Application PC Setup Please read all instructions carefully before use to get the most out of your Outdoor Wireless Surveillance Camera. The design and features
More informationIP Camera User Manual
IP Camera User Manual Please read all instructions carefully before use to get the most out of your Wireless Surveillance Camera. The design and features are subject to change without notice. Contents
More informationMIP12 Camera User Manual
MIP12 Camera User Manual Please read all instructions carefully before use to get the most out of your MIP12 Wireless Surveillance Camera. The design and features are subject to change without notice.
More informationSmartwares. User Manual for C723IP, C724IP, C923IP, C924IP
Smartwares User Manual for C723IP, C724IP, C923IP, C924IP Table of contents 1. Preventive measures and safety instructions 2. Intended use 3. Technical specifications 4. Camera installation 5. Managing
More informationOUTDOOR SECURITY CAMERA WITH LED FLOODLIGHT
OUTDOOR SECURITY CAMERA WITH LED FLOODLIGHT Wifi Security Camera With LED Floodlight Features 20W with 1600 Lumens Indoor and Outdoor Wifi IP Camera with LED flood light Passive IR and Motion sensor Support
More informationSmart Home System Kit
Smart Home System Kit IP SECURITY ALARM SERIES More information, please visit the online CD information on the website http//netcam360.com 0 P a g e BRIEF INSTRUCTION 1. Start Infrared box camera a. Install
More informationVersion: DSD0221EN01. Quick Start Guide
Version: DSD0221EN01 Quick Start Guide Table of Contents Quick Installation Guide... 1 What s in the Box... 1 Quick Start Guide... 2 Notes for Installation... 2 Operation Steps for ios Device... 3 Live
More informationUser Manual. Wireless IP Camera
User Manual Wireless IP Camera Introduction Hi. Thank you for purchasing the AUKEY VT-CM1 Wireless Security IP Camera. Please read this user manual carefully and keep it in a safe place for future reference.
More informationDo not place or mount Ocli 1 in an area where it will be exposed to water. Ocli 1 is designed for indoor use.
1 Manual: Ocli 1 with Observeye Viewer App for Android Setting Up Ocli 1 Live Viewing with Ocli 1 Recording Video and Taking Snapshots Using Advanced Features Setting Up Ocli 1 Place or Mount the Camera
More informationUser Guide. For the latest version of the user guide go to
User Guide For the latest version of the user guide go to www.watchbotcamera.com Please visit www.watchbotcamera.com/guide for the most up to date information on the latest features and configuring your
More informationVersion B Wi-Fi IP CAMERA
HD Version B-1.0.0 Wi-Fi IP CAMERA Quick Start Guide Table of Contents Get Started... 1 Hardware Installation... 1 Live Video... 2 Live Video via Wi-Fi... 6 Camera Settings... 8 Change Password... 8 Alarm
More informationSVT-WIFI Video Intercom System C
SVT-WIFI Video Intercom System C User Manual Please read this user manual prior to installing the system, and keep it well for future use. CONTENTS 1. Parts and Functions... 1 2. Terminal Descriptions...
More informationTablet PC User Manual
Tablet PC User Manual Please read all instructions carefully before use to get the most out of your Time2Touch Tablet PC. The design and features are subject to change without notice. Contents Important
More informationJOOAN Wireless Network Camera
JOOAN Wireless Network Camera Quick Installation Guide Dear Customer, we thank you very much for purchasing this product. Please read this manual carefully and keep it for future reference. 1. Installation
More informationIP Camera User Manual
the world through my eyes R IP Camera User Manual EN App Store Google Play Version:TWS20180723 1Product description 1.1Product Feature 1.2Package Contents 1.3IP Camera Overview 1.4Operating System Requirement
More informationFeatures: (no need for QR Code)
The Capp-Sure series brings a revolution in surveillance. Utilising a range of high-quality IP Wireless cameras, Capp-Sure provides stunning video clarity and optional Talk-Back audio over internet via
More informationUser Manual For AT-100BW/200BW
User Manual For AT-100BW/200BW www.alptopsecurity.com support@alptopsecurity.com This manual is written based on the current version of the software and hardware. If there are any inaccuracies or imperfect
More informationIntroduction. Built-in speaker. Infrared lights. Camera lens. Reset button. Indicator light. Micro- USB port for power supply.
Axel USER MANUAL Contents Introduction 4 LED Indicators 5 What s Included 6 Wi-Fi Requirements 7 Mobile Device Requirements 7 Download the Momentum App 8 Pairing 9 Pairing additional Momentum Devices 11
More informationSaviour App User Manual. User Manual to use app. This documents describe the Saviour app functionalities for end user.
Saviour App User Manual User Manual to use app This documents describe the Saviour app functionalities for end user. Introduction This document describes the Saviour app to use Saviour Indoor, Outdoor
More informationMagnetic base Indicator light Microphone Camera lens Micro SD card slot Infrared light Front Side Pivot connector Built-in speakers
Niro USER MANUAL Contents Introduction 4 Product Features 5 Niro LED Indicators 6 What s Included 7 Wi-Fi Requirements 8 Mobile Device Requirements 8 Garage Door Opener Requirements 8 Download the Momentum
More informationHD Pan Tilt IP Camera
IP Camera User Guide Version 1.0.0.1 HD Pan Tilt IP Camera Page 1 Content 1. Hardware installation... 4 1.1 Hardware connection... 4 1.2 Network connection...5 1.3 WPS setting...5 2. ipad, iphone App introduction...5
More informationQuick Install Guide. Model: PLC-223W, PLC-233W
Quick Install Guide Model: PLC-223W, PLC-233W This installation guide provides basic instructions for installing the PLC-213W/ PLC-223W/PLC-233W indoor wireless IP camera on your network. By following
More informationInstruction Manual. Wi-Fi Full HD 1080p IP Concealed Junction Box Hidden Camera. V 1.3
Instruction Manual Wi-Fi Full HD 1080p IP Concealed Junction Box Hidden Camera After Sales Support techsupport@123anfang.com www.yooseecamera.com V 1.3 Hardware Installation 1. Connect the power supply
More informationMegapixel Wireless IP camera with Night Mode & Audio Support V
Megapixel Wireless IP camera with Night Mode & Audio Support V1.2 2018-06-21 As our products undergo continuous development the specifications are subject to change without prior notice COPYRIGHT Copyright
More informationWI-FI GARAGE DOOR CONTROLLER WITH CAMERA USER MANUAL
WI-FI GARAGE DOOR CONTROLLER WITH CAMERA USER MANUAL Contents Introduction 4 Product Features 5 Garage Door Controller LED Indicators 6 What s Included 7 Wi-Fi Requirements 8 Mobile Device Requirements
More informationAmcrest 650 TVL DVR Quick Start Guide
Amcrest 650 TVL DVR Quick Start Guide Version 1.0.2 Revised May 9 th, 2016 Welcome Thank you for purchasing our Amcrest 650 TVL DVR! This quick start guide will help you become familiar with our DVR in
More informationZivif Security Camera
Zivif Security Camera Quick Installation Guide (RH and RS Series) Support and downloads: www.zivif.com CONNECTION OVERVIEW Wifi / SD onboard storage (supported models only) Wired Camera Router Modem Global
More informationZavio P5111/ P5116/ P5210 Quick Installation Guide
86085M2000010 Zavio P5111/ P5116/ P5210 Quick Installation Guide Installation Steps Please follow the installation steps below to set up your P5111 / P5116/ P5210 Day/Night Pan/Tilt IP Camera. Check the
More information1. NVR Connection Diagram Wizard Setup Access System Using Mobile Device Access System Using PC Client Software 5
1 1. NVR Connection Diagram 2 2. Wizard Setup 3 3. Access System Using Mobile Device 4 4. Access System Using PC Client Software 5 5. Access System Using Internet Explorer 8 6. Recording Setup 9 Motion
More informationQuick Installation Guide
Quick Installation Guide SHENZHEN YELAW TECHNOLOGY CO.,LTD. is the registered trademark of Shenzhen Yelaw Technology CO., Ltd.All the products and product names metioned here are the trademarks or registered
More informationIOS Client. Manual. Tip: To protect your privacy, please modify the machine after landing factory
IOS Client Manual Tip: To protect your privacy, please modify the machine after landing factory password and please keep the user name and password. Manual version: versions date Description V1.0 2013.5.31
More informationWhat s in the Box Get Started Hardware Installation For Mobile Device Set Up Camera... 6
Quick Start Guide Table of Contents What s in the Box... 1 Get Started... 1 Hardware Installation... 2 For Mobile Device... 2 Set Up Camera... 6 Set Up Wi-Fi Without Network Cable... 8 View in Windows
More informationIP Camera Quick Start Guide ==================== H Series V3.1
IP Camera Quick Start Guide ==================== H Series V3.1 1. Package Contents IP Camera 5V Power Adaptor Bracket and Screws Wi-Fi Antenna Network Cable Quick Start Guide 2. Get Started Step-1 Download
More informationQUICK START GUIDE. Wireless Pan&Tilt IP Camera FSC880. Smart Reliable Secure. Faleemi Technologies Ltd.
Wireless Pan&Tilt IP Camera QUICK START GUIDE FSC880 Smart Reliable Secure Faleemi Technologies Ltd www.faleemi.com support@faleemi.com support@faleemi.com www.facebook.com/faleemi Apple, Apple Store,
More informationProHome IPC App. Operating Manual. easy to operate using the "ProHomeIPC" app from Olympia en
ProHome IPC App easy to operate using the "ProHomeIPC" app from Olympia Operating Manual 11.2016 en General Information... 5 Installing the ProHomeIPC App... 5 Connecting the Smartphone/Tablet PC to the
More informationCloud IP Camera Note:
Version:V2.0 Cloud IP Camera User s Manual Note: Due to the continuous updating of the product and software, there may be a discrepancy between the operating guide and the APP interface.all the instructions
More informationIPCAMHD61 User Manual
IPCAMHD61 User Manual TABLE OF CONTENTS: PRODUCT STRUCTURE DIAGRAM SETUP AN ACCOUNT USERNAME ADD CAMERA TO APP CONNECT TO YOUR NETWORK WEB ACCESS PASSWORDS MOBILE APP LAYOUT CAMERA VIEW PAGE CAMERA RECORDINGS
More informationOperation Guide. ismartviewplus V1.0.2 (For windows) July, 2017 Rev1.0
Operation Guide ismartviewplus V1.0.2 (For windows) July, 2017 Rev1.0 Statement If the user manual doesn t help you to resolve the problem, please contact us via our website for technical support. Notice
More informationContents. 1. Verify the package contents
Bullet VERSION 1.3 This installation guide provides basic instructions for installing the PLC-325PW/ PLC-335PW on your network and then configure Android, ios App and PC software to view the camera. For
More informationEverything in your eyes. ismartviewpro. (For iphone) User Manual VER 5.0
IP Cloud Network Camera Everything in your eyes ismartviewpro (For iphone) User Manual 2018-01 VER 5.0 1. ismartviewpro Summary ismartviewpro (iphoneversion) is developed application software based on
More informationQuick Start Guide. WiFi Camera HD Wi-Fi camera with temperature & humidity detection. EU Environmental Protection PL - W0420
PL - W0420 Quick Start Guide EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority
More informationCloud IP Camera Note:
Version:V2.0 Cloud IP Camera User s Manual Note: To protect your privacy, please change the initial password after login. Please keep your user name and password safely. Contents 1. Introduction... 2 1.1
More informationTablet PC User Manual
Tablet PC User Manual Please read all instructions carefully before use to get the most out of your Time2Touch Tablet PC. The design and features are subject to change without notice. Contents Important
More informationIntroduction. See page #6 for device requirements.
W-FI CAMERA USER MANUAL Contents Introduction 4 Camera LED Indicators 5 Wi-Fi Requirements 6 Mobile Device Requirements 6 Download the Momentum App 7 Create an Account 8 Setup 10 Pairing 10 Connecting
More informationHD Pan Tilt IP Camera
IP Camera User Guide Version 1.0.0.1 HD Pan Tilt IP Camera NIP-09L2J NIP-16L2J NIP-22L2J NIP-21L2J Page 1 Content 1. Hardware installation... 4 1.1 Hardware connection... 4 1.2 Network connection...5 1.3
More informationGV-Eye Mobile App. Contents
GV-Eye Mobile App. Contents 1.1 Specifications... 2 1.2 Supported GV-IP Devices and Software... 3 1.2.1 Supported Products for Connection... 3 1.2.2 Supported Products for Enabling Monitoring... 4 1.2.3
More informationAmcrest 960H DVR Quick Start Guide
Amcrest 960H DVR Quick Start Guide Version 2.0.2 Revised July 22, 2015 Welcome Thank you for purchasing our Amcrest 960H DVR! This quick start guide will help you become familiar with our DVR in a very
More informationOnView Mobile Monitoring
User Manual OnView Mobile Monitoring Table of Contents 1. Introduction...2 1.1 Application Description...2 1.2 Phone Compatibility...2 1.3 Where to Download the App...2 2. Application Function...2 2.1
More information1. Product Description
1. Product Description Hardware Description Note: The magnetic base can stick to any metal surface as per below diagram. This allows for better and more solid placement of the camera. 2. Installation 2.1
More informationEM6230 R1 e-camview HD outdoor IP camera
EM6230 R1 e-camview HD outdoor IP camera EM6230 R1 e-camview HD outdoor IP camera 2 ENGLISH Table of contents 1.0 Introduction... 3 1.1 Packing contents... 3 1.2 Requirements to access the camera.... 3
More informationSAS-IPCAM115 SAS-IPCAM116 MANUAL IP CAMERA
SAS-IPCAM115 SAS-IPCAM116 MANUAL IP CAMERA Table of contents Introduction: Safety precautions: Packaging content: System requirements: Product description: User instructions: Maintenance: Warranty: Disclaimer:
More informationSimpli.Fi. App for wifi DK series cameras OWNER'S MANUAL. APP DSE Simpli.Fi for Wi-Fi DK series cameras. Product description. Download DSE Simpli.
Page: 1 Simpli.Fi App for wifi DK series cameras Product description Simpli.Fi is THE app to control all our WIFI hidden cameras to investigate Series DK. Our investigation for cameras are IP cameras to
More informationHIP2P Network Video Camera Client Terminal User Manual
HIP2P Network Video Camera Client Terminal User Manual Document version:5.1 Page 1 of 34 } Preface Thank you for using our company's products. The network video camera client terminal is used to implement
More informationQUICK GUIDE. Camera Installation for iphone, ipad, Android smart phone and tablet
QUICK GUIDE Camera Installation for iphone, ipad, Android smart phone and tablet For Technical questions, please email: info@trivisiontech.com 1 Contents 1.0 Introduction ----------------------------------------------------------------------3
More informationQuick Installation for Luowice Wireless IP Camera.
Quick Installation for Luowice Wireless IP Camera www.youtube.com/watch?v=0jrqpolxqra&feature=youtu.be 1 Camera Panel...01 2 Assemble the Camera...02 3 Configure the Camera with Your Phone...03 3.1 LAN
More information1. Introduction Overview Product Information... 3
1. Introduction... 3 1.1 Overview... 3 1.2 Product Information... 3 2. Device Connection... 3 2.1 Connection Diagram... 3 2.2 Wi-Fi Setting... 4 2.2.1 Set up WiFi by Mobile Phone... 4 2.2.2 WPS/QSS One
More informationGynoii Smart Baby Monitor. User Guide
Gynoii Smart Baby Monitor User Guide 1. Overview of the camera 1. Light sensor 2. Infrared LEDs 3. Lens assembly 4. Built-in microphone 5. Built-in speaker 6. DC 5V power input 7. Reset button 8. LED indicator
More informationPoint of View SmartTV-500 Center - Android 4.2. General notices for use...2 Disclaimer...2 Box Contents...2
Point of View SmartTV-500 Center - Android 4.2 English Table of Contents General notices for use...2 Disclaimer...2 Box Contents...2 1.0 Product basics...3 1.1 Buttons and connections... 3 1.2 Connecting
More informationSmart Wireless WIFI Camera Instructions
Smart Wireless WIFI Camera Instructions Dear users, Thanks for using this product. Please read the users' manual carefully and keep it for future reference. Thank you. 1 Content 1, How to download the
More informationQuick Start Guide. For HD Cameras
Version HD3.0 the world in my eyes Quick Start Guide For HD Cameras NOTE: Certain functions, line drawing and snapshots mentioned in this manual may vary according to camera's model. For example, pan and
More informationWanscam. HW series IP Camera PC Web User Manual
Wanscam HW series IP Camera PC Web User Manual Packing list: IP camera Mounting bracket Antenna Adaptor CD Lan cable Installation guide Screws Note: Some models don t have a separate antenna. Installation
More information1. Install the DANALE app. 2. Create an account
USER S MANUAL EN 1. Install the DANALE app For Android users On your Google Play Store, search for Danale and then install the app on your phone. For ios users Please open your App Store, search for Danale
More informationUser Manual. Microdigital IP-cameras with built-in Ivideon software. Cloud Video Surveillance
User Manual Microdigital IP-cameras with built-in Ivideon software Cloud Video Surveillance Table of Contents Ivideon: basic concepts 3 What is Ivideon? 3 What is an IP camera with built-in Ivideon software?
More informationPanoramic Talking Camera
Panoramic Talking Camera IPC2201 home8alarm.com 1-844-800-6482 support@home8alarm.com 1 Table of Contents Chapter 1. Introduction... 1 1.1 System Requirement... 1 Chapter 2. Hardware Overview... 2 Chapter
More informationIP Camera KK002 Quick Start Guide
HD 720P Version 1.0.2 EN IP Camera KK002 Quick Start Guide Shenzhen Keekoonvision Technology Co., Ltd Table of Contents What s In the Box...... 1 Get Started... 1 Hardware Installation...... 2 For Mobile
More informationALIBI Witness 2.0 v3 Smartphone App for Apple ios Mobile Devices User Guide
ALIBI Witness 2.0 v3 Smartphone App for Apple ios Mobile Devices User Guide ALIBI Witness 2.0 v3 is a free application (app) for Apple ios (requires ios 7.0 or later). This app is compatible with iphone,
More informationLeFun IP Camera Quick Install Guide
LeFun IP Camera Quick Install Guide Website: www.lefunsmart.com E-mail: support@lefunsmart.com Catalog 1. Introduction... 2 1.1. Thank you for Choosing LeFun IP Camera... 2 1.2. Introducing LeFun IP Camera...2
More informationEnrich and Secure Your Life. User Manual. (G6 Plus Camera) Hunan Gaozhi Science And Technology Co., Ltd.
Enrich and Secure Your Life User Manual (G6 Plus Camera) Hunan Gaozhi Science And Technology Co., Ltd. Content 1. Structure....3 2. Main Parameter... 4 3. Networking Diagram... 5 3.1.1. WIFI Connection...
More informationF3102 / F3107 / F3110 / F3115 / F3210 / F3215 PN: 86085K K
F3102 / F3107 / F3110 / F3115 / F3210 / F3215 0 86085K3000020 PN: 86085K3000020 Zavio F3102/F3107/F3110/F3115/F3210/F3215 Quick Installation Guide Please follow the installation steps below to set up
More informationWELCOME. For customer support or any inquiries, please visit our web site at or contact us at
WELCOME Congratulations on purchasing the GBF Smart Four Wire Intercom System. Our factory engineers were the first to enable multiple security cameras being monitored through a smart mobile device and
More informationNS15WG 1080P Web App User Manual
NS15WG 1080P Web App User Manual Table of Contents 1. Getting Started... 4 Download the Web App...4 2. Web App Top Menu... 5 Live Video...6 Video Playback...6 Settings...6 3. Device Configuration... 6
More informationSotion Wireless Camera. User Manual.
Sotion Wireless Camera User Manual Email: Help@sotiongroup.com App Download & Installation The camera is compatible with Wi-Fi 2.4 GHz only, please connect camera to 2.4 GHz Wi-Fi. Make sure your network
More informationPoint of View Android 2.3 Tablet - User s Manual PlayTab Pro
Contents Contents... 1 1. General notes... 2 2. Box contents... 2 3. Product outlook... 3 4. Startup and shut down... 4 5. Desktop... 4 6. Buttons... 5 7. System Settings... 5 8. HDMI... 7 9. Install,
More informationIntroduction. Package Checklist. Minimum System Requirements. Registering Your Product. More Help
Introduction Keep a watch on your family, pet, home or office 24/7, even when you re not there. Creative Live! Cam IP SmartHD gives you a live update on your phone, wherever you are. Get activity alerts,
More informationQRT-501 IE Operation Manual
QRT-501 IE Operation Manual Contents Log In...5 Main Screen...6 Task Bar...7 Right Panel Control...8 Configure the Camera Settings...9 Device Basic Information... 10 View the Device Information...10 Change
More informationGV-Eye Mobile App. Contents
GV-Eye Mobile App. Contents 1.1 Specifications... 2 1.2 Supported GV-IP Devices and Software... 3 1.2.1 Supported Products... 3 1.2.2 Supported Products for Monitoring Activation... 4 1.2.3 Supported Products
More informationWireless Cloud Camera
Wireless Cloud Camera Quick Installation Guide Website: www.lefunsmart.com E-mail: support@lefunsmart.com Note: Due to the continuous updating of the product and software, there may be a discrepancy between
More informationDCS-8000LH. HW Version FW Version App Name App Version. A1 V Mydlink Lite V3.8.0
DCS-8000LH HW Version FW Version App Name App Version A1 V1.00.05 Mydlink Lite V3.8.0 Contents Q1: How to setup DCS-8000LH using mydlink Lite App?... 2 Q2: How to setup Motion detection?... 7 Q3: How to
More informationSHIELDeye SmartCam USER MANUAL
Limited Warranty Terms & Conditions Rosewill Limited warrants this product against defects in workmanship and material for a period of one (1) year from its original purchase date. You must present your
More informationUser Guide LC4. Before using this product, please read the guide carefully to avoid any damage to the product.
User Guide LC4 Before using this product, please read the guide carefully to avoid any damage to the product. 1. Product Description 1.1 Packing list IP Camera User Manual Before using this product, please
More informationTABLE OF CONTENTS 1 INTRODUCTION Overview of Cameramanager go!... 4
User manual TABLE OF CONTENTS 1 INTRODUCTION... 4 1.1 Overview of Cameramanager go!... 4 2 GETTING STARTED... 5 2.1 Connect and activate Cameramanager go!... 5 2.2 Start the online Java application...
More information300 Series Cube Wireless HD Surveillance Camera with Microphone. Installation Manual. Important! Ensure your NVR has the latest firmware!
300 Series Cube Wireless HD Surveillance Camera with Microphone Installation Manual Important! Ensure your NVR has the latest firmware! Read this page before you go to the job site! 2 For maximum control
More informationQuick Start Guide HGWIP-811
TM TM Quick Start Guide HGWIP-811 GIVES PEACE OF MIND WHEREVER YOU ARE Welcome Thank you for choosing HOMEGUARD. Getting starting is easy. ELDERLY Relatives 2 CHILDREN Sleeping/playing PETS Monitoring
More informationHooToo IP Camera User Manual(part two)
HooToo Inc. HooToo IP Camera User Manual(part two) For Model: HT-IP210P Published by SunvalleyTek Group 2014/9/14 Content 1. IPCamClient (windows software)...3 Set up...3 CAM... 13 Local Setting... 13
More informationFrequently asked questions
Frequently asked questions Overview frequently asked questions 1 QUESTIONS ABOUT THE CAMERA & HARDWARE... 4 1.1 Which Wi-Fi networks are supported for... 4 1.2 Which wireless (Wi-Fi) encryption does Panasonic
More informationPlease Download and install the Wanscam APP before you set up the IP Camera. Search on Google Play store and APP Store for E-View 7
Wanscam User Manual for Mobile Phone APP Download Please Download and install the Wanscam APP before you set up the IP Camera. Search on Google Play store and APP Store for E-View 7 One Key Setting Functionality
More informationQuick Installation Guide
V47.01 Model: FI8909W Quick Installation Guide Indoor Wireless IP Camera Black White For Windows OS ------- Page 1 For MAC OS ------- Page 16 ShenZhen Foscam Intelligent Technology Co., Ltd Quick Installation
More informationWelcome Contents Diagram
Welcome Congratulations on your purchase of our GBF PL960 Series of IP Doorbells. Our factory engineers were the first to enable viewing of multiple security cameras through your handheld smart device,
More informationSmart Business Security System Quick Start Guide
Smart Business Security System Quick Start Guide 1 Getting to know your Business Security System The Zmodo Business Security System provides a full-featured monitoring solution to cover your entire business
More informationHOME SECURITY KIT. USER MANUAL SMART PROTECTION WITH THE ALL-IN-ONE SOLUTION. SMART WINDOW SENSOR SMART POWER SOCKET SMART MOTION SENSOR SMART IP CAM
HOME SECURITY KIT. SMART PROTECTION WITH THE ALL-IN-ONE SOLUTION. SMART WINDOW SENSOR SMART POWER SOCKET SMART IP CAM SMART MOTION SENSOR USER MANUAL SL-900100/900111 HOME SECURITY KIT A/B SHORT INSTRUCTION
More information1. Introduction P Package Contents 1.
1 Contents 1. Introduction ------------------------------------------------------------------------------- P. 3-5 1.1 Package Contents 1.2 Tablet Overview 2. Using the Tablet for the first time ---------------------------------------------------
More informationUser Manual. Microdigital IP cameras with built-in Ivideon software
User Manual Microdigital IP cameras with built-in Ivideon software Table of Contents Introduction to Ivideon... What is Ivideon about?... Why use an IP camera with built-in Ivideon software?... How to
More informationModel: M501W. Indoor Pan/Tilt IP Camera. -Contents- Shenzhen Dericam Technology Co., Limited
User Manual Model: M501W Indoor Pan/Tilt IP Camera -Contents- Chapter 1. Introduction of Camera 2 Chapter 2. Package Contents 2 Chapter 3. Physical Descriptions.3 Chapter 4. Surveillance Software GUI.4
More informationTablet PA752C. User Manual
Tablet PA752C User Manual User Manual Notice Before operating the device, please read the safety precautions and user s guide carefully to ensure safe and proper usage. The descriptions in this user s
More informationQuick Installation Guide
V38.01 IP Wireless / Wired Camera Quick Installation Guide (For Windows OS) ShenZhen Foscam Intelligent Technology Co., Ltd Packing List Quick Installation Guide 1) IP CAMERA X 1 2) Wi-Fi Antenna (only
More informationspoe NVR system Quick Start Guide
spoe NVR system Quick Start Guide 1 HDD Installation If your system does not include a pre-installed HDD, you can purchase your own and follow the steps below for installation. Make sure you purchase a
More informationChapter 1 Introduction of the Camera 4. Chapter 2 Install Reolink App System Requirement Install the App 5
Content Chapter 1 Introduction of the Camera 4 Chapter 2 Install Reolink App 5 2.1 System Requirement 5 2.2 Install the App 5 Chapter 3 Device Management 7 3.1 Add New Device 7 3.2 Modify Camera Login
More informationTHE SMART WAY TO ANSWER YOUR DOOR USER MANUAL
THE SMART WAY TO ANSWER YOUR DOOR USER MANUAL IMPORTANT PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING THE SYSTEM AND RETAIN FOR FUTURE REFERENCE. All devices, with the exception of the External Siren
More informationUser manual.
User manual www.zositech.com 1 Product Overview Thank you for choosing ZOSI IP camera. For more instructions, please visit www.zositech.com. 1 2 3 6 5 4 7 1 Microphone 2 Indicating lamp 3 Lens 4 Micro-SD
More information