How do I add another Nucleus device to my family?

Transcription

1 How do I add another Nucleus device to my family? Follow 1. Plug Nucleus into power using the included DC adapter or Power over Ethernet (PoE). If you're connecting with standard etherent, plug in the ethernet cable as well the power cord. 2. Nucleus will start up and check for an Internet connection. This may take a while the first time, so give it a few minutes. If you're connecting with etherent or PoE, skip ahead to step 5.

2 3. If you'll be connecting using Wi-Fi, a list of available Wi-Fi Networks will load. Tap on your network.

3 4. If your network is secured with a password, you'll be prompted for it on the next screen. Enter it using the on-screen keyboard. Tap Show to reveal the password as you type it. Tap the white arrow in the blue circle (the Enter key) to proceed. 5. Nucleus will now check for software updates and install them. Depending on your Internet connection speed, this may take a few minutes. Nucleus may reboot during this process as well. Please do not disconnect from power during this process.

4

5 6. Once the updates finish the Welcome Tour screens will load. Check out these screens to get a good overview of Nucleus - you can swipe between them or tap the on-screen arrows to progress though the Tour.

6

7

8

9

10 7. On the Let's Get Started screen choose the second button, Add Device With a Home Code.

11 8. Enter your Home code, then tap the Enter key. Hint: you received your Home code via when you first set up your Nucleus account.

12 9. Enter a Room Name. This will be how this Nucleus device shows up on other devices it's connected to. This can also be anything you'd like, but we suggest using the name of the room it will be in for simplicity. Tap the Enter key to proceed.

13 10. You'll now be asked to take a Room Photo. This is the image other devices will see next to the Room Name. Tap Take a photo. 11. The camera screen will load. Line up the shot, then tap the camera icon to take the photo. It will count down to zero and then take the photo so you've got time to set up the shot. Tap the checkmark on the right to accept the photo, or Retake on the left to get a new photo. You can take a new photo at any time, so don't worry if it's not perfect.

14

15

16 12. You'll see your Room Photo above the Room Name. Tap Next in the upper-right corner to proceed.

17 13. The next step is to set up Alexa, Amazon's voice assistant, if you'd like. Tap Sign in with Amazon to start the process or tap Skip in the upper-right corner to move forward. You can always set up Alexa later in Settings.

18 14. Use the on-screen keyboard to enter the address and password you use for your Amazon account. You can tap on each field to go between them. Tap Sign in when finished.

19 15. As it's your very first time setting up Alexa on a Nucleus device, Amazon will prompt for permissions to let Nucleus use your Amazon account. Tap I agree to proceed. 16. The next two screens show how to use Alexa. We advise downloading the Alexa mobile app to set up additional Alexa features. Tap Next, then Done to finish setup.

20

21 17. The next (and final!) screen in the setup process is a safety stop. An will go to your administrator address to approve the addition of this device as an extra security measure. Check your and click APPROVE in the body of the message we send you. If you don't see the message, check any spam or junk folders. You can send a new verification by

22 tapping RESEND , and you can start the setup process over with a different Home code by tapping START OVER. 18. Congratulations! You've added a Nucleus device to your family! You'll see some callouts on the Home screen walking you through the Do Not Disturb, Privacy, and Settings buttons. Tap through these to learn how they work and to dismiss them. All the Nucleus devices and mobile devices in your family should appear on the Home screen, ready to be called. Now that this Nucleus device is set up and added to a family, you can call and be called by other devices in the family. You can also invite Remote connections as well.