SonicWALL Security 6.2 Appliance

Transcription

1 Security SonicWALL Security 6.2 Appliance System Compatibility SonicWALL Security 6.2 is supported on the following SonicWALL Security appliances: SonicWALL Security 200 SonicWALL Security 300 SonicWALL Security 400 SonicWALL Security 500 SonicWALL Security 6000 SonicWALL Security 8000 Enhancements The following is a list of enhancements made to features in the SonicWALL Security 6.2 Appliance release: BATV To reduce the number of false bounce messages (NDRs), you can now enable Bounce Address Tag Validation on your outbound messages. This feature is described in the New Features section of this document and in the Administrator s Guide. Performance Monitoring Performance Monitoring allows you to see a visual representation of performance metrics on your SonicWALL Security system. This feature is described in the New Features section of this document and in the Administrator s Guide. Enhanced Licensing MySonicWALL has updated product licensing, including per-user licenses and stackable licenses. For more information on the new licensing model, see the technote New Licensing Model for Security.

2 Known Issues The following is a list of known issues in the SonicWALL Security 6.2 release: Operation 65089: Symptom: After a reboot, the Security Appliance may not properly re-synchronize with the Network Time Protocol server. Using the SonicWALL command-line interface to turn the appliance s NTP connection off and then on again resets the time properly. To ameliorate the issue, be sure you always allow the appliance to power-off gracefully. Condition: Occurs on restart of an ESA, if the ESA is not able to immediately connect to the NTP server : Symptom: When attempting to view or ununk a very large message in the junkbox, users may see the error Sorry, but there was an error. Please click the close button and try again. If you continue to experience problems, contact SonicWALL Support. Condition: Occurs when a user or administrator attempts to view or unjunk a very large message (over 66 MB). Power-down Procedure Your SonicWALL Security Appliance will perform better if you follow the shutdown procedures when you need to power-down. To shut down your appliance, use the web interface, or press the power button on the front of the appliance once. Holding down the power button or unplugging your appliance does not give it time to write all the data in volatile memory to stable memory, and you may lose settings or data. 2

3 Resolved Known Issues The following is a list of resolved known issues in the SonicWALL Security release: 69674: Symptom: Customers who have upgraded all their remote analyzers to 6.2 and licensed them as a cluster on MySonicWALL.com may have experienced licensing problems. Resolution: Fixed the license associations so customers do not experience licensing problems. The following is a list of resolved known issues in the SonicWALL Security 6.2 release: 66412: Symptom: Vulnerability scanners reported that unauthorized access was possible through the RemoteBindAddress. Resolution: Changed the SonicWALL version of Firebird to only accept connections from the localhost : Symptom: Some French-language s were being wrongly identified. Resolution: Improved the language detection by character sets : Symptom: SonicWALL Security returned an SPF fail result if a message had an unknown macro. Messages with a fail result were put in the junk box. Resolution: Changed the SPF handling to return a neutral result, which will result in fewer false positives : Symptom: An earlier version of Apache Tomcat had a vulnerability in the web connector. Resolution: The version of Tomcat distributed with SonicWALL Security has been upgraded : Symptom: When users upgraded to 6.1 or 6.1.1, they sometimes had to rebuild their reporting database and therefore lost some historical reporting data. Resolution: Updated the connection method for the new versions of the software. The following is a list of resolved known issues in the SonicWALL Security release: 65949: Symptom: Unable to log in to the SonicWALL Security management interface, and unable to ping the LAN IP address of the SonicWALL Security appliance. Condition: After upgrading to the SonicWALL Security release, IP address and hostname for the appliance are not retained. 3

4 New Features The following new features have been added to version 6.2. This section contains the technical notes written to introduce the features. BATV SonicWALL has added an option to use Bounce Address Tag Validation (BATV) to reduce the number bounce messages received by users (such as non-delivery receipts (NDR) and delivery status notification (DSN) messages.). Bounce Address Tag Validation SonicWALL Security has added support for Bounce Address Tag Validation (BATV). BATV adds a stamp to the envelope of all outbound mail. If the mail is bounced and does not reach a recipient, the stamp alerts the inbound mail processor that this originated within your organization. False bounce messages, which will not have the stamp, will not be passed through the inbound mail processor. To use BATV, SonicWALL Security must touch all outbound mail. For maximum efficiency of processing inbound bounces, SonicWALL Security should be your first-touch inbound mail processor. SonicWALL Security will read the bounce message envelope, determine whether or not it is legitimate, and only download and pass through legitimate messages. The added BATV tag is removed before the is passed to the users. BATV is not enabled by default. Although BATV is a powerful tool to eliminate false bounce messages, some configurations on other mail servers may cause the BATV system to reject legitimate bounce messages. The user who sent out the message would not know it did not reach the intended recipient. Reasons for false positives might include: LDAP upstream of SonicWALL Security Null reverse paths instead of From fields Divergent SonicWALL Security configuration Incorrect or altered reverse mail paths Users might also get false negatives where they get false bounce messages even though they did not send the originals. False negatives might come from a spambot or zombie infection of the organization. In that case, the spam would be properly stamped as it left the organization. What is a Bounce Message? Bounced messages are also known as non-delivery receipts (NDR) and delivery status notification (DSN). They are an message from a receiving or relaying mail server to notify the sender that their message has not reached the destination. This notification system allows users to assume that messages are successful unless they are otherwise notified. The user receives a message telling them that their was not received by the recipient. Sometimes, the original or a part of it is attached. Sometimes, there is a plain-language explanation of why the failed. Like any other message, there is a header indicating the server that sent the message. Almost always, a legitimate bounced message will contain the headers and envelope of the original message. This allows for troubleshooting. This is also what BATV uses to validate legitimate bounced messages. However, some spammers spoof a legitimate address, and use it to send out spam. When the is recognized as spam and rejected, or when it is rejected for other reasons, the bounce messages come back to the legitimate address, even though that user is not the one who sent them out. These false bounce messages are called backscatter and place a burden on spoofing victim s sever. 4

5 Enabling BATV on SonicWALL Security To enable BATV, you must turn it on for both your outbound and inbound SonicWALL Security servers, if they are different. If you are running an all-in-one system, you only have to turn it on once. BATV will work best if your SonicWALL portal is the last-touch for outbound mail and the first-touch for inbound mail. NOTE: For the first 4-5 days after you enable BATV, your users may not receive legitimate bounce messages. This is because there are messages which are still trying to reach an invalid destination, and when they come back, they will not have the appropriate stamp. To enable BATV: 1. Log into your Security as an administrator. 2. Choose System from the left navigation bar. 3. Choose Connection Management. 4. Scroll down to the Quality of Service section. 5. Click in the Bounced Address Tag Validation to enable BATV 6. Click Apply Changes. BATV is now enabled. If you have different servers for inbound and outbound mail, make sure that it is enabled on both servers. Troubleshooting BATV This section contains some common problems and solutions for using BATV with SonicWALL Security. Problem: Users are still receiving false bounce messages. Causes: You may not have enabled BATV on your inbound mail server, or it may be that the inbound BATV filtering happens too late in the inbound process. Problem: Users are not receiving valid bounce messages. Causes: Users may be sending out POP3 mail and bypassing the outbound stamp from the servers. BATV may be implemented in one direction and not the other. Other organizations mail servers may not recognize BATV, or may treat it as an attack. Conclusion BATV is a solution to backscatter caused by spoofed addresses. Only messages sent from within your organization will be returned as bounces. This drastically reduces the bounce traffic. BATV must be enabled on both inbound and outbound servers to work. 5

6 Performance Monitoring SonicWALL has added a performance monitoring section to SonicWALL Security. This feature allows administrators to view and compare performance metrics with the Security interface without downloading and formatting CVS files. The performance monitoring section displays data that has always been collected by SonicWALL Security. Performance monitoring allows administrators to monitor a single metric over a period of time, or to compare two metrics. Once an administrator creates a graph, the graph can be saved or ed to share with others who do not have administrator privileges. Reading Performance Monitoring There are two ways of viewing the data: by comparing data from the same day but different process metrics, or by comparing data of the same process metric across several days. The View Multiple metrics for a given date option creates a graph which contains one or two process metrics for a given date. If there are two metrics, a second y-axis scale will appear at the right-hand side of the graph for the interpretation of the second metric. The Compare many data files for a single performance metric option creates a graph for a single process metric across multiple days. Each day s worth of data is a line of a different color. Up to six data files can be displayed. Graphs are shown for a 24-hour period starting and ending at midnight GMT+0. Once a graph is specified, it will not display or redraw until the Refresh Reports button is clicked. To view the raw data files used to build a particular graph, click either the to or the Download buttons and a ZIP file containing the data files and also the bitmap will be provided accordingly. NOTE: When the Security System is processing heavy volume/large attachments the CPU processor time may be higher than normal. This is an expected behavior. CPU processor time can vary widely depending on number of factors and high processor time alone is not an indication of a potential issue, so unless you are noticing very slow processing/delivery coupled with high CPU processor time(~100%) for an extended period of time (typically > 1hour) there is no indication of any functional issue with the product. However if you notice these symptoms and the issue persists for extended periods of time, contact the SonicWALL Support. Creating a Performance Monitoring Graph To create a performance monitoring graph: 1. Log into your Security as an administrator. 2. Choose Reports & Monitoring from the left navigation bar. 3. Choose Monitoring. 4. Choose Performance Monitoring. 6

7 5. You will see the empty performance monitoring graphs. 6. Choose the type of performance graph you want. 7. For the multiple metrics graph: Select the date you want information on from the select data file dropdown box. Click in the first select process box and choose a process. Click in the first select metric box and choose a metric of the selected process. If you want to compare a second metric, repeat the process with the second set of dropdown boxes. 7

8 Click the Refresh button. You will see the performance graph for those metrics on that day. 8. For the multiple days graph: Select the process and metric you want information on. Select your dates from the data file dropdown boxes. 8

9 Click the Refresh button. You will see the performance graph for that metric on those days. Monitored Metrics The following processes are currently monitored and available as data files. These data files have always existed, but the information is now more readily accessible. Monitoring Service Tomcat Service Replicator Service SMTP Server Thumb Updater Service Database Service Operating System MTA Service 9

10 Metrics List These are the process metrics that are being tracked and stored in the data files. Most of these metrics exist in each process. The most common metrics appear in the table below. Metrics not shown in the list are usually System process monitoring. Process Metric Private Bytes(kB) Virtual Bytes(kB) %Disk Time %Processor Time Available Bytes Avg. Disk Bytes/Transfer Avg. Disk Queue Length Buffer Bytes Cache Bytes Committed Bytes Connections Established Connection Failures Connections Reset Handle Count Install Dir Free Space Private Bytes Description The percentage of elapsed time that the selected disk drive was busy servicing read or write requests. The percentage of elapsed time that all of process threads used to execute instructions. An instruction is the basic unit of execution in a computer, a thread is the object that executes instructions, and a process is the object created when a program is run. Code is executed to handle some hardware interrupts and trap conditions The amount of physical memory, in bytes, available to processes running on the computer. This is calculated by adding the amount of space on the Zeroed, Free, and Standby memory lists. Free memory is ready for use; zeroed memory consists of pages of memory filled with zeros to prevent subsequent processes from seeing data used by a previous process; standby memory is memory that has been removed from a process' working set, but is still available to be recalled. This counter displays the last observed value only; it is not an average. The time, in seconds, of the average disk transfer. The average number of read and write requests queued for the selected disk during the sample interval. Used in Linux systems. Buffer Bytes is the number of bytes consumed by the kernel. The sum of the Memory\\System Cache Resident Bytes, Memory\\System Driver Resident Bytes, Memory\\System Code Resident Bytes, and Memory\\Pool Paged Resident Bytes counters. This counter displays the last observed value only; it is not an average. The amount of committed virtual memory, in bytes. Committed memory is the physical memory which has space reserved on the disk paging file(s). There can be one or more paging files on each physical drive. This counter displays the last observed value only; it is not an average. The number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT. The number of times TCP connections have made a direct transition to the CLOSED state from the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state. The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state. The total number of handles this process currently has open. This number is the sum of the handles currently open by each thread in this process. For Windows, the number of bytes remaining free on the installation drive. Private Bytes is the current size, in bytes, of memory that this process has allocated which cannot be shared with other processes. 10

11 Segments Retransmitted/sec Segments/sec Swap Available Bytes Thread Count Virtual Bytes The rate at which segments are retransmitted, that is, segments transmitted containing one or more previously transmitted bytes. The rate at which TCP segments are sent or received using the TCP protocol. Used in Linux systems. Swap Available Bytes is Swap space which is still free to use. The number of threads currently active in this process. An instruction is the basic unit of execution in a processor, and a thread is the object that executes instructions. Every running process has at least one thread. The current size, in bytes, of the virtual address space the process is using. Use of virtual address space does not imply corresponding use of either disk or main memory pages. Virtual space is finite, and the process can limit its ability to load libraries. Conclusion SonicWALL Security has added performance monitoring graphs so that administrators can more easily see performance metrics for their systems. These graphs compliment other graphs already existing in the product. 11

12 Upgrading to Security Firmware 6.2 The following procedures are for upgrading an existing Security firmware to Security 6.2. Downloading SonicWALL Security Firmware Log into your mysonicwall.com account at 2. In the left navigation pane under Downloads, click Download Center. 3. In the Activate Service Software Download dialog box, select a language from the Select Language drop-down list. 4. Select the checkbox to agree to the terms and conditions, and then click Submit. 5. In the Download Center screen, select Security Firmware from the Type drop-down list. If not already on this selection, the screen will refresh to show links to the available Security firmware versions and release notes. 6. Click the link for the version that you want and then select Save in the dialog box to save the download to your local files system. Backing Up Your Existing Environment Before you upgrade your firmware to 6.2, you should back up your existing environment. This will enable you to restore it if you decide to change back for some reason. Your backup should include the setting files, including the per user settings. To back up your existing environment: 1. Login to Security interface using the admin account 2. In the left navigation pane under System, choose Backup/Restore. You will see the Backup/Restore page: 3. In the Manage Backups section, select Settings. 4. Click Take Snapshot Now to create a snapshot. 5. Click Download Snapshot to save the snapshot to your local file system If, after upgrading to 6.2, you need to roll back to a previous version, go back to the Backup/Restore page and use the Manage Restores section to upload the snapshot you have stored. Note: Rollback is allowed to version only. 12

13 Upgrading Your SonicWALL Security Firmware Follow this procedure to upgrade your existing Security to Security Navigate to the System > Advanced page and scroll down to the Upload Patch section. 2. Click Browse to locate the Security Firmware file on your local file system, and then click Apply Patch. 3. As part of the upgrade process, the Security appliance will reboot. The upgrade process could take between min. All the settings and data will be preserved. Document part number: Rev: A Last updated: 8/7/