CA Unified Infrastructure Management

Transcription

1 CA Unified Infrastructure Management clariion Release Notes All series

2 Copyright Notice This online help system (the "System") is for your informational purposes only and is subject to change or withdrawal by CA at any time. This System may not be copied, transferred, reproduced, disclosed, modified or duplicated, in whole or in part, without the prior written consent of CA. This System is confidential and proprietary information of CA and protected by the copyright laws of the United States and international treaties. This System may not be disclosed by you or used for any purpose other than as may be permitted in a separate agreement between you and CA governing your use of the CA software to which the System relates (the CA Software ). Such agreement is not modified in any way by the terms of this notice. Notwithstanding the foregoing, if you are a licensed user of the CA Software you may make one copy of the System for internal use by you and your employees, provided that all CA copyright notices and legends are affixed to the reproduced copy. The right to make a copy of the System is limited to the period during which the license for the CA Software remains in full force and effect. Should the license terminate for any reason, it shall be your responsibility to certify in writing to CA that all copies and partial copies of the System have been destroyed. TO THE EXTENT PERMITTED BY APPLICABLE LAW, CA PROVIDES THIS SYSTEM AS IS WITHOUT WARRANTY OF ANY KIND, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. IN NO EVENT WILL CA BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY LOSS OR DAMAGE, DIRECT OR INDIRECT, FROM THE USE OF THIS SYSTEM, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST INVESTMENT, BUSINESS INTERRUPTION, GOODWILL, OR LOST DATA, EVEN IF CA IS EXPRESSLY ADVISED IN ADVANCE OF THE POSSIBILITY OF SUCH LOSS OR DAMAGE. The manufacturer of this System is CA. Provided with Restricted Rights. Use, duplication or disclosure by the United States Government is subject to the restrictions set forth in FAR Sections , , and (c)(1) - (2) and DFARS Section (b)(3), as applicable, or their successors. Copyright 2014 CA. All rights reserved. All trademarks, trade names, service marks, and logos referenced herein belong to their respective companies. Legal information on third-party and public domain software used in this product is documented in the Third-Party Licenses and Terms of Use (

3 Contact CA Contact CA Support For your convenience, CA Technologies provides one site where you can access the information that you need for your Home Office, Small Business, and Enterprise CA Technologies products. At you can access the following resources: Online and telephone contact information for technical assistance and customer services Information about user communities and forums Product and documentation downloads CA Support policies and guidelines Other helpful resources appropriate for your product Providing Feedback about Product Documentation Send comments or questions about CA Technologies product documentation to To provide feedback about general CA Technologies product documentation, complete our short customer survey which is available on the support website at

4

5 Contents Chapter 1: clariion General Overview 7 Chapter 2: Requirements 9 Hardware Requirements... 9 Software Requirements... 9 Supported Platforms... 9 Chapter 3: Considerations 11 Installation Considerations General Use Considerations Chapter 4: Revision History 11 Contents 5

6

7 Chapter 1: clariion General Overview EMC Clariion storage systems represent a critical infrastructure component. The clariion probe monitors the EMC Clariion CX4 storage systems. Using Navisphere CLI, the probe provides extensive availability and performance metrics. Chapter 1: clariion General Overview 7

8

9 Chapter 2: Requirements This section lists hardware and software requirements for the probe, and supported platforms. This section contains the following topics: Hardware Requirements (see page 9) Software Requirements (see page 9) Supported Platforms (see page 9) Hardware Requirements None. Software Requirements Robot 6.5 or later Java 1.6 or later Navisphere CLI Clariion CX4-480 Supported Platforms Refer to the Compatibility Support Matrix for the latest information about supported platforms. See also the Support Matrix for Probes for more specific information about the probe. Chapter 2: Requirements 9

10

11 Chapter 3: Considerations This section describes installation and general use considerations for the clariion probe. This section contains the following topics: Installation Considerations (see page 11) General Use Considerations (see page 11) Installation Considerations Navisphere CLI must be installed on the same system as the clariion probe. Clariion CX4-480 is a prerequisite. General Use Considerations None. Chapter 4: Revision History Chapter 3: Considerations 11

12 General Use Considerations This section describes the history of the revisions for this probe. Date Description State Version October 2014 Fixed a defect where the Source Override feature was not working properly. (Salesforce Case: ) GA 1.64 Added support for VNX and VNX2. Certified the probe for: VNX Models:VNX5300 and VNX5700 VNX2 Models: VNX5400 and VNX8000 Added three new LUN metrics: LUN Response Time, LUN Service Time and LUN Queue Length. Added five new SP metrics: Utilization, Total IOPs, AverageBusyQueueLength, Service Time and Response Time. Added three new SPE metrics: Management Modules, IOModules and Standby Power Supplies. Added two new DAE metrics: Link Control Cards and Fans. Certain metric names have been changed to achieve consistency in the way CA UIM reports metrics vs. EMC. July 2014 Fixed a defect where the Infrastructure Manager (IM) GUI was not able to fetch and display the profile information when the probe was opened from a remote machine. January 2014 Fixed the defect of not displaying the disk metrics for a LUN. The metrics were available at device itself but not for the LUNs, where are built from a pool. Now, the probe displays all disk metrics for LUN also. December 2012 Fixed the defect of passing the Test button even when the NaviSecCli command fails. Now, the probe fails the subsequent commands and the Test button when the NaviSecCli command fails. Fixed the defect of not reflecting the updated message severity, when the Clariion system is not responding. Now, the probe shows the updated message details when details are updated in the message pool irrespective of the Clariion status. Fixed Disk State for hot spare drives; now reports "Hot Spare Ready". Upgrading the probe to the 1.6 version overwrites the existing (incorrect) Disk State configuration. GA GA clariion Release Notes

13 General Use Considerations Date Description State Version November 2012 Added default templates. Beta 1.60 Added simulation mode using recorded data. Fixed parsing issue with some VNX naviseccli output. Fixed null pointer exception when parsing info about removed drives. Added check to avoid re-sending alarms for old Clariion logs at probe startup. Added metrics for Thin LUN IOPS, Throughput. Fixed incorrect Empty disk status on last non-empty drive. September 2011 Certification on VNX hardware platform. GA 1.50 August 2011 Added usage metering metrics and CIs. Fixed major defects. May 2011 Added code to process CI metrics March 2011 New metric for Disk State. New relay to convert CLARiiON Events to NMS alarms. Use bundled jre package. December 2010 GA version of the probe December 2010 Fixed a problem with enabling monitors using only the checkbox. December 2010 Added support for templates. Added new Thin Pool metrics, including Percent Full, Percent Available, Percent Subscribed, Consumed Capacity, and User Capacity. Added new RAID Group Percent Free metric. Added new LUN metrics, including Currently Trespassed and Trespasses (Past Hour). Added new Mirror View State metric. Added new FAST Cache category with metrics for Mode, Percent Dirty (SP A & SP B), Size, and State. Added a checkbox to enable or disable relaying CLARiiON faults as Alarms Chapter 4: Revision History 13

14 General Use Considerations Date Description State Version November 2010 Added configurable scope to probe GUI Updated thin pool processing for FLARE 30. Made scope configurable for navicli commands. October 2010 Initial version of the probe clariion Release Notes