WECC Criterion INT-001-WECC-CRT-3
|
|
|
- Lillian May
- 5 years ago
- Views:
Transcription
1 WECC Criterion INT-001-WECC-CRT-3 A. Introduction 1. Title: e-tag Requirements for WECC including Wrongful Denial of Request for Interchange (RFI) 2. Number: INT-001-WECC-CRT-3 3. Purpose: To manage Arranged Interchange and address evaluation errors not explicitly addressed in North American Electricity Reliability Corporation Reliability (NERC) Standards or North American Energy Standards Board (NAESB) Business Practice Standards, but are considered necessary for transactions sinking within the Western Interconnection. 4. Applicability: 4.1. Functional Entities: Balancing Authorities Transmission Service Provider 5. Effective Date: The first day of the second quarter following WECC Board of Director approval. WESTERN ELECTRICITY COORDINATING COUNCIL 155 North 400 West, Suite 200 Salt Lake City, Utah
2 INT-001-WECC-CRT-3 e-tag Requirements for WECC including Wrongful Denial of RFI Page 2 of 6 B. Requirements and Measures WR1. Each Balancing Authority and Transmission Service Provider shall use the e-tag as the primary tool to communicate Reliability Adjustment RFIs, when transmission curtailment on its system is required. WM1. Each Balancing Authority and each Transmission Service Provider will have evidence that it used the e-tag as its primary tool to communicate Reliability Adjustment RFIs, as required in WR1. Evidence may include, but is not limited to, production of the associated e-tag. WR2. Each Balancing Authority and each Transmission Service Provider that receives an ontime Arranged Interchange, an emergency RFI, or a Reliability Adjustment RFI for reliability assessment, shall approve its transition to Confirmed Interchange, unless one of the following occurs: Implementation of the Confirmed Interchange would result in violation of a NERC Reliability Standard, NAESB Business Practice Standard, WECC Regional Criterion, Transmission Service Provider Transmission Tariff or business practice. WM2. In those cases where the interchange transaction was denied, each Balancing Authority and each Transmission Service Provider will have evidence of one of the following, as required in WR2: Acceptance of an Arranged Interchange would have resulted in the violation of any NERC Reliability Standard, NAESB Business Practice Standard, WECC Regional Criterion, Transmission Service Provider Transmission Tariff or business practice. WR3. Each Balancing Authority and each Transmission Service Provider that incorrectly denies the transition of Arranged Interchange to Confirmed Interchange or allows on-time Arranged Interchange, an emergency RFI, or a Reliability Adjustment RFI to transition to EXPIRED, shall take the following corrective action: If the Arranged Interchange has not transitioned to a final composite state, correct its denial by approving the transition from Arranged Interchange to Confirmed Interchange. If the Arranged Interchange has transitioned to a final composite state of DENIED or EXPIRED, contact the submitter of the RFI and request that they re-submit the RFI. Approve or deny the transition of the re-submitted Arranged Interchange to Confirmed Interchange, subject to WR2 above, without consideration to the LATE time classification. Contact those remaining entities that have yet to approve or have denied the transition from Arranged Interchange to Confirmed Interchange and communicate to them that the Arranged Interchange is subject to this document.
3 INT-001-WECC-CRT-3 e-tag Requirements for WECC including Wrongful Denial of RFI Page 3 of 6 WM3. Each Balancing Authority and each Transmission Service Provider will have evidence that corrective action was taken if either the Balancing Authority or the Transmission Service Provider incorrectly allowed on-time Arranged Interchange, an emergency RFI, or a Reliability Adjustment RFI to transition to a final composite state of DENIED or EXPIRED, as required in WR3. Examples of evidence to prove corrective action was taken may include, but is not limited to, voice recordings, dispatcher logs, or other related records. WR4. Each Balancing Authority and each Transmission Service Provider submitting a Reliability Adjustment RFI that sets the reliability limit below the actual available reliability limit shall submit a new Reliability Adjustment RFI with the accurate reliability limit within five minutes after discovering the error. WM4. Each Balancing Authority and each Transmission Service Provider will have evidence that a new Reliability Adjustment RFI was submitted, as required in WR4.
4 INT-001-WECC-CRT-3 e-tag Requirements for WECC including Wrongful Denial of RFI Page 4 of 6 Version History Version Date Action Change Tracking 2 1 Initial Tracking INT-BPS September 6, 2007 Requirements change. Change to 3. 1 August 31, 2009 Designation change to Criterion. Developed as WECC INT-BPS Delete WR3.1.2 as e-tag 1.8 TSP no longer allowed in the Scheduling Entity field; deleted the or in WR3.1.1 as there is no or with deletion of 3.1.2; deleted WR4.1 because there never was a 4.1. Renamed: INT-001-WECC-CRT-01 2 October 20, 2010 Standing Committee Approved Approved for Board review as INT-001-WECC-CRT-02 2 December 9, 2010 WECC Board of Directors Approved Updated as part of INT Rewrite Project 2 September 5, 2012 Board changed designation INT-001-WECC-CRT-2 changed to INT-001-WECC-RBP-2 2 June 25, 2014 Board changed designation INT-001-WECC-RBP-2 changed to INT-001-WECC-CRT January 28, 2016 Errata The word of was inserted into the Title line. 2.1 April 1, 2016 No Change Converted to new template 3 June 21, 2017 WECC Standards Committee for approval. Developed as WECC-0121A. Five-year review. Conformed to drafting conventions. Capitalized terms changed to lower case where possible. Disclaimer WECC receives data used in its analyses from a wide variety of sources. WECC strives to source its data from reliable entities and undertakes reasonable efforts to validate the accuracy of the data used. WECC believes the data contained herein and used in its analyses is accurate and reliable. However, WECC disclaims any and all representations, guarantees, warranties, and liability for the information contained herein and any use thereof. Persons who use and rely on the information contained herein do so at their own risk. 1 Previous Tracking System 2 Previous Tracking System
5 INT-001-WECC-CRT-3 e-tag Requirements for WECC including Wrongful Denial of RFI Page 5 of 6 Attachments Not used.
6 INT-001-WECC-CRT-3 e-tag Requirements for WECC including Wrongful Denial of RFI Page 6 of 6 Rationale A Rationale section is optional. If Rationale Boxes were used during the development of this project, the content of those boxes appears below. Rationale Boxes were not developed for this project.
WECC Criterion INT-001-WECC-CRT-2.13
WECC Criterion INT-001-WECC-CRT-2.13 A. Introduction 1. Title: e-tag Requirements for WECC including Wrongful Denial and Loss of Communication ProceduresRequest for Interchange (RFI) 2. Number: INT-001-WECC-CRT-2.13
WECC Criterion MOD-(11 and 13)-WECC-CRT-1.1
WECC Criterion MOD-(11 and 13)-WECC-CRT-1.1 A. Introduction 1. Title: Steady State and Dynamic Data Requirements 2. Number: MOD-(11 and 13)-WECC-CRT-1.1 3. Purpose: To establish the consistent data requirements
WECC Board of Directors. Approved Regional Criteria
Document name Category Document date July 29, 2010 Adopted/approved by WECC Interchange Authority Backup (WIAB) Regional Criterion ( ) Regional Reliability Standard (X) Regional Criterion ( ) Policy (
Standard INT Dynamic Transfers
Standard INT-004-3.1 Dynamic Transfers A. Introduction 1. Title: Dynamic Transfers 2. Number: INT-004-3.1 3. Purpose: To ensure Dynamic Schedules and Pseudo-Ties are communicated and accounted for appropriately
This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective.
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
Standard INT Interchange Authority Distributes Arranged Interchange
Standard INT-005-2 Authority Distributes A. Introduction 1. Title: Authority Distributes 2. Number: INT-005-2 3. Purpose: To ensure that the implementation of between Source and Sink Balancing Authorities
Standard INT Dynamic Transfers
A. Introduction 1. Title: Dynamic Transfers 2. Number: INT-004-3 3. Purpose: To ensure Dynamic Schedules and Pseudo-Ties are communicated and accounted for appropriately in congestion management procedures.
BC Hydro Open Access Transmission Tariff Effective: January 26, 2018 OATT Attachment Q-1 First Revision of Page 1
OATT Attachment Q-1 First Revision of Page 1 ATTACHMENT Q-1 Dynamic Scheduling This attachment contains the eligibility requirements and the terms and conditions for the provision of dynamic scheduling
WON Security Guideline
WON Security Guideline Data Exchange Work Group October 7, 2015 155 rth 400 West, Suite 200 Salt Lake City, Utah 84103-1114 WON Security Guideline 1 Table of Contents Purpose... 1 Background... 1 Security
primary Control Center, for the exchange of Real-time data with its Balancing
A. Introduction 1. Title: Reliability Coordination Monitoring and Analysis 2. Number: IRO-002-5 3. Purpose: To provide System Operators with the capabilities necessary to monitor and analyze data needed
Introduction. ADSTF Report of Lessons Learned from the Implementation of the 2028 ADS Anchor Data Set Task Force February 22, 2019
ADSTF Report of Lessons Learned from the Implementation of the 2028 ADS Anchor Data Set Task Force February 22, 2019 Introduction Throughout 2015 and 2016 the structure of committees in the Western Electricity
WECC Internal Controls Evaluation Process WECC Compliance Oversight Effective date: October 15, 2017
WECC Internal Controls Evaluation Process WECC Compliance Oversight Effective date: October 15, 2017 155 North 400 West, Suite 200 Salt Lake City, Utah 84103-1114 WECC Internal Controls Evaluation Process
History of NERC August 2013
History of NERC August 2013 Timeline Date 1962 1963 November 9, 1965 1967 1967 1968 June 1, 1968 July 13 14, 1977 1979 Description The electricity industry creates an informal, voluntary organization of
NORTH AMERICAN ELECTRIC RELIABILITY CORPORATION
NORTH AMERICAN ELECTRIC RELIABILITY CORPORATION NARUC Energy Regulatory Partnership Program The Public Services Regulatory Commission of Armenia and The Iowa Utilities Board Janet Amick Senior Utility
Standard COM Communication and Coordination
A. Introduction 1. Title: Communication and Coordination 2. Number: COM-002-3 3. Purpose: To ensure Emergency communications between operating personnel are effective. 4. Applicability 4.1. Reliability
History of NERC December 2012
History of NERC December 2012 Timeline Date 1962-1963 November 9, 1965 1967 1967-1968 June 1, 1968 July 13-14, 1977 1979 1980 Description Industry creates an informal, voluntary organization of operating
Unofficial Comment Form Project Operating Personnel Communications Protocols COM-002-4
Project 2007-02 Operating Personnel Communications Protocols COM-002-4 Please DO NOT use this form. Please use the electronic comment form to submit comments on the proposed draft COM 002 4 (Operating
Proposed Convention for Numbering of NERC Reliability Standards Draft September 9, 2004
Proposed Convention for ing of NERC Reliability s Draft September 9, 2004 Introduction The Version 0 Drafting Team proposes to initiate a new convention for numbering NERC reliability standards concurrent
Open Access Transmission Tariff of Southern Companies
Open Access Transmission Tariff of Southern Companies Procedures for Reserving Transmission Capacity for Future Load Growth, Designating/Undesignating Network Resources, and Arranging for Other Related
5. Effective Date: The first day of the first calendar quarter after applicable regulatory approval.
Introduction 1. Title: IROL and SOL Mitigation in the ERCOT Region 2. Number: IRO-006-TRE-1 3. Purpose: To provide and execute transmission loading relief procedures that can be used to mitigate SOL or
bcuc British Columbia Utilities Commission
January 26, 2018 bcuc British Columbia Utilities Commission Patrick Wruck Commission Secretary Commission.Secretary@bcuc.com bcuc.com Suite 410, 900 Howe Street Vancouver, BC Canada V6Z 2N3 P: 604.660.4700
This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective.
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
Physical Security Reliability Standard Implementation
Physical Security Reliability Standard Implementation Attachment 4b Action Information Background On March 7, 2014, the Commission issued an order directing NERC to submit for approval, within 90 days,
November 9, Revisions to the Violation Risk Factors for Reliability Standards IRO and TOP
!! November 9, 2016 VIA ELECTRONIC FILING Jim Crone Director, Energy Division Manitoba Innovation, Energy and Mines 1200-155 Carlton Street Winnipeg MB R3C 3H8 RE: Revisions to the Violation Risk Factors
Standards Authorization Request Form
Standards Authorization Request Form When completed, email this form to: sarcomm@nerc.com NERC welcomes suggestions to improve the reliability of the bulk power system through improved reliability standards.
Coordinate Interchange
Coordinate Interchange Purpose: The purpose of this standard is to define procedures for market participants to request the implementation of Interchange Transactions. Applicability: This Standard applies
Coordinate Interchange
Coordinate Interchange Purpose: The purpose of this standard is to define procedures for market participants to request the implementation of Interchange Transactions. Applicability: This Standard applies
Bryan Carr PMP, CISA Compliance Auditor Cyber Security. Audit Evidence & Attachment G CIP 101 Salt Lake City, UT September 25, 2013
Bryan Carr PMP, CISA Compliance Auditor Cyber Security Audit Evidence & Attachment G CIP 101 Salt Lake City, UT September 25, 2013 About Me Joined WECC in August 2012 Before WECC CIP Compliance Program
Québec Reliability Standards Compliance Monitoring and Enforcement Program Implementation Plan Annual Implementation Plan
Québec Reliability Standards Compliance Monitoring and Enforcement Program Implementation Plan 2017 Annual Implementation Plan Effective Date: January 1, 2017 Approved by the Régie: December 1, 2016 Table
A. Introduction. B. Requirements and Measures
A. Introduction 1. Title: Communications 2. Number: COM-001-3 3. Purpose: To establish Communication capabilities necessary to maintain reliability. 4. Applicability: 4.1. Functional Entities: 4.1.1. Transmission
NERC CIP Information Protection
NERC CIP Information Protection Eric Ruskamp Manager, Regulatory Compliance September 13, 2017 1 Agenda NERC History NERC Compliance Overview of Reliability Standards Compliance with Reliability Standards
Cyber Security Reliability Standards CIP V5 Transition Guidance:
Cyber Security Reliability Standards CIP V5 Transition Guidance: ERO Compliance and Enforcement Activities during the Transition to the CIP Version 5 Reliability Standards To: Regional Entities and Responsible
Standard Development Timeline
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard is adopted by the NERC Board of Trustees (Board).
CIP Cyber Security Configuration Change Management and Vulnerability Assessments
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
Standard COM-002-2a Communications and Coordination
A. Introduction 1. Title: Communication and Coordination 2. Number: COM-002-2a 3. Purpose: To ensure Balancing Authorities, Transmission Operators, and Generator Operators have adequate communications
NERC Overview and Compliance Update
NERC Overview and Compliance Update Eric Ruskamp Manager, Regulatory Compliance August 17, 2018 1 Agenda NERC Overview History Regulatory Hierarchy Reliability Standards Compliance Enforcement Compliance
Standard CIP Cyber Security Incident Reporting and Response Planning
A. Introduction 1. Title: Cyber Security Incident Reporting and Response Planning 2. Number: CIP-008-4 3. Purpose: Standard CIP-008-4 ensures the identification, classification, response, and reporting
History of NERC January 2018
History of NERC January 2018 Date 1962 1963 The electricity industry created an informal, voluntary organization of operating personnel to facilitate coordination of the bulk power system in the United
Compliance Enforcement Initiative
Compliance Enforcement Initiative Filing and Status Update November 2, 2011 Rebecca Michael Status of the Filings NERC filed several components of the Compliance Enforcement Initiative on September 30,
Rocky Mountain Power Exhibit RMP (RTL-1) Docket No Witness: Rick T. Link BEFORE THE PUBLIC SERVICE COMMISSION OF THE STATE OF UTAH
Exhibit RMP (RTL-1) BEFORE THE PUBLIC SERVICE COMMISSION OF THE STATE OF UTAH ROCKY MOUNTAIN POWER Exhibit Accompanying Direct Testimony of Rick T. Link May 31, 2017 Pre-Issuance Bidders Conference Presentation
Standard CIP 007 4a Cyber Security Systems Security Management
A. Introduction 1. Title: Cyber Security Systems Security Management 2. Number: CIP-007-4a 3. Purpose: Standard CIP-007-4 requires Responsible Entities to define methods, processes, and procedures for
FNM Expansion Training Webinar
FNM Expansion Training Webinar Cynthia Hinman Lead Client Trainer August 11, 2014 The information contained in these materials is provided for general information only and does not constitute legal or
RELIABILITY COMPLIANCE ENFORCEMENT IN ONTARIO
RELIABILITY COMPLIANCE ENFORCEMENT IN ONTARIO June 27, 2016 Training provided for Ontario market participants by the Market Assessment and Compliance Division of the IESO Module 1 A MACD training presentation
Standards Authorization Request Form
Standards Authorization Request Form When completed, email this form to: sarcomm@nerc.com NERC welcomes suggestions to improve the reliability of the bulk power system through improved reliability standards.
Standard CIP Cyber Security Critical Cyber As s et Identification
A. Introduction 1. Title: Cyber Security Critical Cyber Asset Identification 2. Number: CIP-002-4 3. Purpose: NERC Standards CIP-002-4 through CIP-009-4 provide a cyber security framework for the identification
Standard CIP 005 4a Cyber Security Electronic Security Perimeter(s)
A. Introduction 1. Title: Cyber Security Electronic Security Perimeter(s) 2. Number: CIP-005-4a 3. Purpose: Standard CIP-005-4a requires the identification and protection of the Electronic Security Perimeter(s)
This draft standard is being posted for an initial comment and ballot. The draft includes modifications to meet the directives of FERC Order No. 791.
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
Standard CIP Cyber Security Critical Cyber As s et Identification
A. Introduction 1. Title: Cyber Security Critical Cyber Asset Identification 2. Number: CIP-002-4 3. Purpose: NERC Standards CIP-002-4 through CIP-009-4 provide a cyber security framework for the identification
Path Operations post WECC TOP 007 Rob Witham, WAPA RMR TSS Supervisor
Path Operations post WECC TOP 007 Rob Witham, WAPA RMR TSS Supervisor May 10, 2017 ISAS Salt Lake City, UT WECC Standard TOP 007 WECC 1a Title: System Operating Limits Purpose: To limit instances where
This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective.
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Description of Current Draft
Standard Development Timeline
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Description of Current Draft
Standard Authorization Request Form
Standard Authorization Request Form E-mail completed form to rsm@texasre.org Texas RE to Complete SAR No: Title of Proposed Standard IRO-006-TRE-1 IROL and SOL Mitigation in the ERCOT Region Request Date
Proposed Improvements for NERC MOD Standards July 10, 2012
Agenda Item 3.6 Planning Committee Meeting September 18-19, 2012 Proposed Improvements for NERC MOD Standards July 10, 2012 Background This paper outlines proposed improvements for NERC Reliability Standards
Grid Security & NERC. Council of State Governments. Janet Sena, Senior Vice President, Policy and External Affairs September 22, 2016
Grid Security & NERC Council of State Governments The Future of American Electricity Policy Academy Janet Sena, Senior Vice President, Policy and External Affairs September 22, 2016 1965 Northeast blackout
New Brunswick 2018 Annual Implementation Plan Version 1
New Brunswick Energy and Utilities Board Reliability Standards, Compliance and Enforcement Program New Brunswick 2018 Annual Implementation Plan Version 1 December 28, 2017 Table of Contents Version History...
Standard CIP 007 3a Cyber Security Systems Security Management
A. Introduction 1. Title: Cyber Security Systems Security Management 2. Number: CIP-007-3a 3. Purpose: Standard CIP-007-3 requires Responsible Entities to define methods, processes, and procedures for
Enhanced Curtailment Calculator Update
Enhanced Curtailment Calculator Update December 13, 2017 Member Advisory Committee Meeting Brett Wangen Chief Engineering and Technology Officer Jeremy West Manager, Interconnection Reliability Initiatives
Quarter 3, 2007 (2007Q3) Generation Deliverability Assessment Study Plan
Quarter 3, (Q3) Generation Deliverability Assessment Study Plan Background and Purpose of Study Phases I & II Generation and Import Deliverability Studies were completed that established the deliverability
SPP RTO Compliance Forum Western Area Power Administration March 11, 2015
SPP RTO Compliance Forum Western Area Power Administration March 11, 2015 Mark Buchholz WAPA Upper Great Plains Region Compliance Manager What is Western? One of four Power Marketing Administration within
Unofficial Comment Form Project Modifications to CIP Standards Virtualization in the CIP Environment
Unofficial Comment Form Project 2016-02 Modifications to CIP Standards Virtualization in the CIP Environment Do not use this form for submitting comments. Use the electronic form to submit comments on
Unofficial Comment Form Project Operating Personnel Communications Protocols COM Operating Personnel Communications Protocols
Project 2007-02 Operating Personnel Communications Protocols COM-002-4 Operating Personnel Communications Protocols Please DO NOT use this form. Please use the electronic comment form to submit comments
Project Retirement of Reliability Standard Requirements
Project 2013-02 Retirement of Reliability Standard Requirements Unofficial Comment Form for Paragraph 81 (P81) Project Retirement of Reliability Standard Requirements This form is provided in a Word format
Standard CIP-006-4c Cyber Security Physical Security
A. Introduction 1. Title: Cyber Security Physical Security of Critical Cyber Assets 2. Number: CIP-006-4c 3. Purpose: Standard CIP-006-4c is intended to ensure the implementation of a physical security
Standard Development Timeline
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard is adopted by the NERC Board of Trustees (Board).
Standards Authorization Request Justification
Standards Authorization Request Justification Project 2009-02 Real-time Monitoring and Analysis Capabilities NERC Report Title Report Date 1 of 30 3353 Peachtree Road NE Suite 600, North Tower Atlanta,
1. SAR posted for comment on January 15, Standard Drafting Team appointed on January 29, 2014
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
Designation and Termination of Network Resources
Transmission & Reliability Services Business Practice: Designation and Termination of Network Resources Posted: February 8, 2010 Effective: May 3, 2010 Revision No.: 5 1. Purpose The purpose of this business
British Columbia Utilities Commission Reliability Standards with Effective Dates adopted in British Columbia
Page 1 of 15 British Columbia Utilities Reliability Standards with s adopted in British Columbia BAL-001-2 Standard Real Power Balancing Control Performance R-14-16 July 1, 2016 BAL-002-1 1 Disturbance
Standard CIP-006-3c Cyber Security Physical Security
A. Introduction 1. Title: Cyber Security Physical Security of Critical Cyber Assets 2. Number: CIP-006-3c 3. Purpose: Standard CIP-006-3 is intended to ensure the implementation of a physical security
Standard CIP Cyber Security Electronic Security Perimeter(s)
A. Introduction 1. Title: Cyber Security Electronic Security Perimeter(s) 2. Number: CIP-005-2 3. Purpose: Standard CIP-005-2 requires the identification and protection of the Electronic Security Perimeter(s)
TOP-010-1(i) Real-time Reliability Monitoring and Analysis Capabilities
A. Introduction 1. Title: Real-time Reliability Monitoring and Analysis Capabilities 2. Number: TOP-010-1(i) 3. Purpose: Establish requirements for Real-time monitoring and analysis capabilities to support
Standard Authorization Request Form
Standard Authorization Request Form Title of Proposed Standard: Project 2009-02: Real-time Reliability Monitoring and Analysis Capabilities Original Request Date: June 4, 2009 Revised Date: January 15,
Energy Imbalance Market: PacifiCorp Stakeholder and Tariff Revision Plan
Energy Imbalance Market: PacifiCorp Stakeholder and Tariff Revision Plan Document Version 1.9 Date Updated: January 17, 2014 The following document outlines PacifiCorp s Stakeholder and Tariff Revision
Self-Certification Tutorial. Version 1.0 April 2013
Version 1.0 April 2013 The PLAN At the end of this tutorial, you will be able to: 1. Describe the purposes of Self-Certification 2. Identify deadlines 3. Describe the use of the Self-Certification template
Standard TOP Transmission Operations
A. Introduction 1. Title: Transmission Operations 2. Number: TOP-001-34 3. Purpose: To prevent instability, uncontrolled separation, or Cascading outages that adversely impact the reliability of the Interconnection
Analysis of CIP-006 and CIP-007 Violations
Electric Reliability Organization (ERO) Compliance Analysis Report Reliability Standard CIP-006 Physical Security of Critical Cyber Assets Reliability Standard CIP-007 Systems Security Management December
BAL Real Power Ba la ncing Control Performance Standard Background Document
BAL-001-1 Real Power Ba la ncing Control Performance Standard Background Document January 2012 3353 Peachtree Road NE Suite 600, North Tower Atlanta, GA 30326 404-446-2560 www.nerc.com Table of Contents
DRAFT. Cyber Security Communications between Control Centers. March May Technical Rationale and Justification for Reliability Standard CIP-012-1
DRAFT Cyber Security Communications between Control Centers Technical Rationale and Justification for Reliability Standard CIP-012-1 March May 2018 NERC Report Title Report Date I Table of Contents Preface...
Standard Development Timeline
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Description of Current Draft
ATTACHMENT F Form of Service Agreement for Wholesale Network Integration Transmission Service
Improvement and Power District Original Sheet No. F-1 ATTACHMENT F Form of Service Agreement for Wholesale Network Integration Transmission Service 1.0 This Form of Service Agreement for Wholesale Network
CIP Cyber Security Personnel & Training
A. Introduction 1. Title: Cyber Security Personnel & Training 2. Number: CIP-004-6 3. Purpose: To minimize the risk against compromise that could lead to misoperation or instability in the Bulk Electric
Hetch Hetchy Water and Power of the City and County of San Francisco. Joint Transmission Planning Base Case Preparation Process
California Independent System Operator & Hetch Hetchy Water and Power of the City and County of San Francisco Joint Transmission Planning Base Case Preparation Process This is a living document. Please
NERC Relay Loadability Standard Reliability Standards Webinar November 23, 2010
Transmission Relay Loadability FERC Order 733 Project 2010-1313 NERC Relay Loadability Standard Reliability Standards Webinar November 23, 2010 Project Overview 2 Standards Involved PRC-023-2 Transmission
Reliability Standard Audit Worksheet 1
Reliability Standard Audit Worksheet 1 CIP-012-1 Cyber Security Communications between Control Centers This section to be completed by the Compliance Enforcement Authority. Audit ID: Registered Entity:
Standard CIP Cyber Security Security Management Controls
A. Introduction 1. Title: Cyber Security Security Management Controls 2. Number: CIP-003-4 3. Purpose: Standard CIP-003-4 requires that Responsible Entities have minimum security management controls in
Standard CIP Cyber Security Systems Security Management
A. Introduction 1. Title: Cyber Security Systems Security Management 2. Number: CIP-007-4 3. Purpose: Standard CIP-007-4 requires Responsible Entities to define methods, processes, and procedures for securing
MOD Transmission Reliability Margin Implementation Document
Transmission Margin Implementation Document Transmission Margin Implementation Document For NERC Page 1 of 7 Transmission Margin Implementation Document 1.0 Purpose The California Independent System Operator
Misoperation Information Data Analysis System
Misoperation Information Data Analysis System User Guide October, 2017 NERC Report Title Report Date I Table of Contents Preface... iv Overview... v Chapter 1: User Setup... 1-1 Creating an Account...
March 15, 2011 VIA ELECTRONIC FILING
California Independent System Operator Corporation VIA ELECTRONIC FILING The Honorable Kimberly D. Bose Secretary Federal Energy Regulatory Commission 888 First Street, NE Washington, D.C. 20246 Re: California
NERC Notice of Penalty regarding Upper Peninsula Power Company, FERC Docket No. NP09-_-000
May 7, 2009 Ms. Kimberly Bose Secretary Federal Energy Regulatory Commission 888 First Street, N.E. Washington, D.C. 20426 Re: NERC Notice of Penalty regarding, FERC Docket No. NP09-_-000 Dear Ms. Bose:
North American Energy Standards Board
Review of NAESB Formation and the Wholesale Electric Quadrant NPCC General Meeting Albany, NY September 19, 2002 Presented by Karl Tammar New York ISO 1 Background Evolved from Gas Industry Standards Board
Proposed Clean and Redline for Version 2 Implementation Plan
Exhibit A Implementation Plans for CIP-002-2 through CIP-009-2 and CIP-002-3 and CIP-009-3 For Generator Owners and Generator Operators of U.S. Nuclear Power Plants Proposed Clean and Redline for Version
NERC Request for Data or Information: Protection System Misoperation Data Collection August 14, 2014
Request for Data or Information Protection System Misoperation Data Collection August 14, 2014 3353 Peachtree Road NE Suite 600, North Tower Atlanta, GA 30326 404-446-2560 www.nerc.com 1 of 15 Table of
Small Generator Interconnection Facilities Study Report. Completed for. ( Interconnection Customer ) Proposed Interconnection Pavant substation
Small Generator Interconnection Facilities Study Report Completed for ( Interconnection Customer ) Proposed Interconnection Pavant substation Original report dated February 17, 2016 Revised March 11, 2016
Records Retention Policy
June 21, 2017 Table of Contents 1 Introduction...3 1.1 Purpose...3 1.2 Scope...3 1.3 Review Cycle...3 1.4 Document Owner...3 1.5 Definitions...3 2 Policy...4 2.1 Records and Record Storage...4 2.2 Applicable
Standard CIP 004 3a Cyber Security Personnel and Training
A. Introduction 1. Title: Cyber Security Personnel & Training 2. Number: CIP-004-3a 3. Purpose: Standard CIP-004-3 requires that personnel having authorized cyber or authorized unescorted physical access
WIRAB Report to the Peak RC Board of Directors
WIRAB Report to the Peak RC Board of Directors Eric Baran & Holly Taylor WIRAB Staff December 14, 2017 1 WIRAB Activities Peak RC Activities Outline 2 WIRAB Activities Fall 2017 Leadership Delegation to
California Independent System Operator Corporation Fifth Replacement Electronic Tariff
Table of Contents Appendix M... 2 Dynamic Scheduling Protocol (DSP)... 2 1. DYNAMIC SCHEDULES OF IMPORTS TO THE CAISO BALANCING AUTHORITY AREA... 2 1.2 Contractual Relationships... 2 1.3 Communications,
Standard CIP 005 2a Cyber Security Electronic Security Perimeter(s)
A. Introduction 1. Title: Cyber Security Electronic Security Perimeter(s) 2. Number: CIP-005-2a 3. Purpose: Standard CIP-005-2 requires the identification and protection of the Electronic Security Perimeter(s)
Implementation Plan for COM-001-2
Defined Terms in the NERC Glossary The RC SDT proposes the following new definitions: Interpersonal Communication: Any medium that allows two or more individuals interact, consult, or exchange information.