ENA SmartVoice User Guide

Size: px
Start display at page:

Download "ENA SmartVoice User Guide"

Transcription

1

2 TABLE OF CONTENTS SECTION 1: INTRODUCTION... 1 SECTION 2: MAKING CALLS... 2 Internally... 2 Externally... 2 Emergency Calls... 2 Speaker Phone... 2 Ending Calls... 2 SECTION 3: ANSWERING CALLS... 3 Using the Handset... 3 Using the Speaker... 3 SECTION 4: CALL FORWARDING... 3 Introduction... 3 Immediate, Busy and No Answer Call Forwarding Using the Handset... 4 Enabling... 4 Disabling... 4 Access codes... 4 SECTION 5: ADVANCED CALL HANDLING... 5 Putting a Call on Hold... 5 Call Waiting... 5 Transferring a Call... 5 Blind Transfer... 5 Consultative Transfer... 6 Transferring Directly to Voic Three Way Conferencing... 7 Parking a Call... 8 Retrieving a Parked Call... 8 Do Not Disturb... 8 SECTION 6: VOIC Accessing Voic Using the Voic System... 9 SECTION 7: OTHER PHONE FEATURES Speed Dials Monitoring Other Lines Paging Account Codes Headset... 11

3 SECTION 8: INTRODUCING ENA SMARTVOICE END USER PORTAL Accessing Logging In Using the ENA SmartVoice End User Portal Getting Help Logging Out SECTION 9: ENA SMARTVOICE END USER PORTAL DASHBOARD Messages Missed Calls Call Back Contacts Calling a Contact Settings SECTION 10: MESSAGES AND CALLS Messages Listen to a Message Deleting a Message Marking a Message as Heard Marking a Message as New Call Back Add Caller to Contacts Missed Dialed Received Rejected Setting Up Call Rejection Deleted Deleting a Single Message Deleting All Messages SECTION 11: CONTACTS Individual Contacts Searching Contacts Adding a New Contact Editing a Contact Deleting a Contact Calling a Contact Group Contacts Searching Within Group Contacts Adding a New Group Speed Dials Adding a Speed Dial Deleting a Speed Dial Extensions Short Codes... 53

4 SECTION 12: REACH ME (PRO PACKAGE) Summary Rules Initial Rule Set Up Adding a New Set of Rules Adding a New Rule Editing a Rule Deleting a Rule Weekly Schedule and Special Days Weekly Schedule Special Days (Holidays) SECTION 13: REACH ME (PLUS PACKAGE) Summary Forwarding Immediately Busy/No Answer Unanswered Calls Busy Calls Selected Callers Forwarding Destinations Follow Me (ENA SmartVoice Plus Package) Sequential Ring Simultaneous Ring Screening SECTION 14: REACH ME (PRIME PACKAGE) Summary Forwarding Immediately No Answer Forwarding Destinations SECTION 15: GROUPS Multi Line Hunt Groups Viewing Multi Line Hunt Groups Using Multi Line Hunt Groups Call Pickup Groups Viewing Call Pickup Groups Using Call Pickup SECTION 16: SETTINGS Account Calls Messages Notifications Reminders Adding Reminders Deleting Reminders

5 SECTION 17: CLICK TO DIAL Calling From Your Regular Phone SECTION 18: CONFIGURING YOUR PHONE'S KEYS Using the Phone Configurator's graphical view APPENDIX A: ACCESS CODES

6 SECTION 1: INTRODUCTION Welcome to your new phone! This document describes the features of your phone, including the ENA SmartVoice End User Portal. This guide will help you get up and running with your new phone as soon as possible. It tells you how to use your phone and the more commonly used features. Sections 3 to 7 outline the most common tasks that you will carry out when using your new desk phone, including making internal and external calls o answering calls using either the handset or speaker o setting up call forwarding using your handset o accessing your messages through the voic system These chapters also describe some more advanced call handling features, such as o putting calls on hold o transferring calls o conferencing a third person into a two-way call o parking calls You should familiarize yourself with these chapters first so that you can begin using your phone as soon as possible. Section 8 describes the more advanced functions and features of your phone system, including using the ENA End User Portal to manage your messages, missed calls, contacts and phone settings. Appendix A contains a quick-reference guide to all of the access codes that you will need when using your new phone. If after referring to this guide you're still having problems with your phone system then please contact your Technology Coordinator or ENA's CTAC. Copyright Education Networks of America, Inc. Page 1

7 SECTION 2: MAKING CALLS Internally To call another person in your organization, lift the handset and dial the other person's extension. This is typically a 4, 5, or 6 digit number. Externally To call a number outside of your organization, lift the handset and dial the phone number. Emergency Calls In an emergency lift the handset and dial 911. Speaker Phone To make a call using your speaker phone, either press the Speaker key or leave the handset on-hook and dial the number of the person you want to call, or the Dial or Send key. Ending Calls To end a call, replace the handset or press the End Call key. Copyright Education Networks of America, Inc. Page 2

8 SECTION 3: ANSWERING CALLS Using the Handset To answer an incoming call, lift your handset and you will be connected to the caller. Using the Speaker To answer a call using the speakerphone, do not lift the handset and instead press the Speaker key, the "answer" soft key, or press the line button next to the line that is ringing. SECTION 4: CALL FORWARDING Introduction Your phone system supports a number of different types of Call Forwarding. Immediate (sometimes called Unconditional) Call Forwarding is where all calls are forwarded to a number of your choice. This can either be to your voic , another extension in your organization or an external number. Busy Call Forwarding forwards all calls that are received when you are already on the phone. No Answer (sometimes called Delay) Call Forwarding forwards all calls when you do not answer them after a certain delay. Selective Call Forwarding forwards calls from certain numbers to another number. The easiest and most flexible way of configuring call forwarding is using the ENA SmartVoice End User Portal. See Section 12: Reach Me for instructions on doing this. This section provides instructions on how to set up Call Forwarding using your handset. Copyright Education Networks of America, Inc. Page 3

9 Immediate, Busy and No Answer Call Forwarding Using the Handset This feature can be enabled or disabled via your handset if you have the ENA SmartVoice Prime or ENA SmartVoice Plus packages. Enabling To use your handset to enable Immediate, Busy or No Answer Call Forwarding dial the access code for the type of call forwarding you want to enable. For example, to use immediate call forwarding to forward all calls, dial *72 and the number you want to forward to. Disabling To disable call forwarding, dial the disable code for that type of call forwarding. Access codes Call Forwarding access codes Copyright Education Networks of America, Inc. Page 4

10 SECTION 5: ADVANCED CALL HANDLING Putting a Call on Hold You can put a call on hold by pressing the Hold key. You may now replace the handset without cutting the caller off. You can also now make another call while the first call is on hold. To retrieve the call, press the Resume key or the Hold key again. Call Waiting If a second call comes in when you are already on the phone, you will hear a tone and the phone screen will display the details of the second caller. To answer this second call you should press the Answer key, or press the line key which is flashing. Answering the second call will automatically put the first call on hold. You can toggle between the calls by placing the current one on hold and retrieving the other call. Transferring a Call There are multiple ways to transfer a call. Blind Transfer Using the Transfer Hard Button 1. Answer the call. 2. Press the Transfer button. 3. Press the Blind soft key. 4. Enter the number you want to transfer to. 5. Press the Send soft key. NOTE: If you have an appearance of the person you want to transfer to on your phone, you can: 1. Press the Transfer button. 2. Press the Blind soft key. 3. Press the button associated with the user you want to transfer to. Copyright Education Networks of America, Inc. Page 5

11 Using the Blindxfer Soft Key 1. Answer the call. 2. Press the Blindxfer soft key. 3. Enter the number you want to transfer to. 4. Press the Enter soft key. NOTE: You may need to press the Send soft key if it appears on your screen. Consultative Transfer 1. Answer the call. 2. Press the Transfer button. 3. Enter the number you want to transfer to. 4. When the person answers, announce the caller (the caller is on hold during this time). NOTE: If the user you are transferring to cannot take the call, press the Cancel soft key to return to the original caller. 5. Press the Transfer button again to complete the transfer. NOTE: If you have an appearance of the person you want to transfer to on your phone, you can: 1. Press the Transfer button. 2. Press the button associated with the user you want to transfer to. 3. When the person answers, announce the caller. 4. Press the Transfer button again to complete the transfer. IMPORTANT: You will not be able to complete the transfer until the user you are transferring to answers the phone. Copyright Education Networks of America, Inc. Page 6

12 Transferring Directly to Voic Using the Transfer Hard Button 1. Answer the call. 2. Press the Transfer button. 3. Press the Blind soft key. 4. Dial *90 and dial the extension. 5. Press the Send softy key. Using the VMxfer Soft Key 1. Answer the call. 2. Press the VMxfer soft key. 3. Enter the number want to transfer to. 4. Press the Enter soft key. NOTE: You may need to press the Send soft key if it appears on your screen. Three Way Conferencing 1. When in a regular call, press the Conference button or soft key. 2. Dial the person you want to join your call. 3. Once this person has answered press the Conference key again to set up the three way call. Copyright Education Networks of America, Inc. Page 7

13 Parking a Call Parking a call places the call on hold in a "park orbit" so that the call can be retrieved from another phone. Based on your phone type, there are two ways of parking a call. 1. If you have keys on your phone for parking calls, when in a call press the key of the park orbit where you want the call parked. The call will now be parked and you may now replace the handset. 2. If your phone doesn't have dedicated call park keys, follow these steps: Initiate call transfer by pressing the Transfer key. Dial the Call Park access code (*98). Listen to the park orbit number where the call will be parked. Complete the call transfer by pressing Transfer again. If you have keys on your phone for parking calls these keys will indicate via a light or icon when a call is parked against that orbit. Retrieving a Parked Call Based on your phone type, there are two ways of retrieving a parked call. 1. If you have keys on your phone for parked calls, pick up the handset and press the key of the park orbit where the call is parked. 2. If you don't have dedicated call park keys lift the handset and dial the Call Retrieve access code (*99) followed by the park orbit number. For example, to retrieve a call parked on orbit 100, you should dial * Do Not Disturb If you don't want any calls to ring your phone, but instead go straight through to your voic , you can enable Do Not Disturb. To enable Do Not Disturb, press the Do Not Disturb button. To disable Do Not Disturb, press the button again. On the Polycom 3XX series phones, press the Menu button, then select Features, then press Do Not Disturb. Copyright Education Networks of America, Inc. Page 8

14 SECTION 6: VOIC Accessing Voic When you have one or more unheard voice messages waiting, your phone will display a flashing light. To listen to your messages press the Messages or Vmail key on your phone. The first time you access your voic box you will be asked to set up your mailbox, and record your name and a greeting to be played by callers. Using the Voic System The voic system is menu driven, so listen to the voice prompts and then press the keys on your phone to select which option you would like. Once you become familiar with the system there is no need to wait until the voice prompts have played before pressing a key you can interrupt the announcements to speed up your experience. For your convenience, the most commonly used mailbox commands are as follows. Mailbox Commands To listen to your voice messages from the main menu: Press 1 To listen to your other messages from the main menu: Press 1 1 To save a message once you've listened to it: Press 2 To delete a message once you've listened to it: Press 3 To change your mailbox settings from the main menu: Press 4 To cancel the current operation: Press * To go back to the previous menu: Press * To finish entering digits, or recording an announcement: Press # Copyright Education Networks of America, Inc. Page 9

15 SECTION 7: OTHER PHONE FEATURES Speed Dials Your phone system supports three different sorts of speed dials. 1. Based on your phone model, keys on your phone can be configured to automatically call certain destinations. To configure these keys for speed dials, see Section 16, Configuring Your Phone's Keys. 2. Another sort of speed dial is when you dial a short number (2 digits), which is configured to call a regular extension or phone number. To configure these speed dials, see Section 11: Contacts under Speed Dials. 3. Your phone system also supports Short Codes. These are short (usually 3, 4 or 5 digit) numbers which are speed dials that can be used and are the same on any phone in your organization. They are set up by your Technology Coordinator and you can view them in the ENA SmartVoice End User Portal. See Section 11, Contacts under Short Codes for how to do this. Monitoring Other Lines Some models of phones let you monitor the status of other extensions in your organization. A key and a lamp on your phone will be associated with that other extension. If there is no call in progress on that extension, the lamp will not be lit. If a call is ringing on that extension, the lamp will blink green quickly. If a call is on hold on that extension, the lamp will blink red slowly. If a call is in progress on that extension, the lamp will be lit red solidly. If you want to answer a call that is ringing on the extension you are monitoring, pick up your handset and press the key for that extension. You will be connected to the caller. The ability to answer these lines needs to be enabled by ENA. You can also use these keys as speed dials for the other extension. To call the other extension when there is no call in progress on it, pick up your handset and press the key for that extension. Copyright Education Networks of America, Inc. Page 10

16 Paging Paging is a feature which allows a phone user to press a key on their phone and for whatever they say to automatically come out of another phone's speaker. The user of that other phone doesn't have to answer their phone. Administrators can create up to 25 paging zones per site. Administrators will further decide who can transmit to each zone and will subscribe or listen to each zone. If you have a paging key on your phone, you can page a destination by following these steps: 1. Pick up your handset. 2. Select the zone you want to page to. 3. Press the paging key. 4. Speak into the phone. Your voice will automatically come out of the other phone. To finish paging, hang up the phone or press the End Page soft key. Account Codes If you have account codes configured on your line then once you have dialed a number which requires a code, you will hear a tone. You will then need to dial a special code before the call is connected. Your system may use either validated or non-validated account codes. If your system uses validated account codes then you must enter a specific code that has been configured either by your Technology Coordinator or by you. If your system uses non-validated account codes you can enter any code so long as it is the right length. If you have account codes your Technology Coordinator should have explained this to you and told you what codes to use. Headset Most of the models of phones supported by your phone system allow you to connect a headset. This allows you to make and take calls while keeping your hands free for other tasks. To connect a headset to your phone, turn the phone upside down and connect the headset into the socket marked with the headset icon. To make or answer a call using your headset, press the headset key on your phone. Copyright Education Networks of America, Inc. Page 11

17 SECTION 8: INTRODUCING ENA SMARTVOICE END USER PORTAL The User Portal provides a web interface to your phone settings and allows you to view recent calls view and listen to your voic s set up your contacts change your phone and phone system settings Accessing To access your ENA SmartVoice End User Portal, point a browser to and click User Portal. The ENA SmartVoice User Portal is supported on Windows 2000, Windows XP, Windows 2003 and Windows Vista, using the following browser versions: IE8 or later FF3.5 or later Safari 4 or later Chrome JavaScript must be enabled on your browser. Copyright Education Networks of America, Inc. Page 12

18 Logging In The following shows a sample ENA SmartVoice End User Portal login page. ENA SmartVoice End User Portal login page To log into the ENA SmartVoice End User Portal enter your phone number and your password, and click Login. Copyright Education Networks of America, Inc. Page 13

19 Using the ENA SmartVoice End User Portal Once you have logged in, you will see the Dashboard. This gives you a quick at-a-glance summary of your messages, missed calls, contacts and phone settings. Dashboard Along the top of the window are a series of tabs which you can select to take you to the different pages within the User Portal. Dashboard This is the at-a-glance summary you see when you first log in. Messages & Calls This shows you all of your voice messages, and the calls you've made, answered or missed. Contacts You can add and view all of your contacts and their phone numbers on this tab. Reach Me On this tab, you can configure the services on your phone line, like Call Forwarding and Selective Call Rejection on this tab. Copyright Education Networks of America, Inc. Page 14

20 Groups Here you can view any groups your line is part of in your organization, such as hunt groups. You can also login and logout of groups here. Settings The Settings page gives you access to numerous other options, such as changing your passwords and PINs, and configuring the keys on your phone. Using the functions on each of these pages is described in more detail in the rest of this document. Getting Help If you need assistance with using the ENA SmartVoice End User Portal, click the More Options icon ( ) and select Help. Logging Out If you don't use the User Portal for 30 minutes, you will be automatically logged out. However, if you wish to manually log out, for example because you've been accessing the Portal using a shared computer, you can do so by clicking the More Options icon ( ) and selecting Logout. Copyright Education Networks of America, Inc. Page 15

21 SECTION 9: ENA SMARTVOICE END USER PORTAL DASHBOARD The End User Portal Dashboard is shown when you log into your User Portal and gives you an at-aglance summary of your phone line. In this section we'll examine the Dashboard in more detail. Sample Dashboard Copyright Education Networks of America, Inc. Page 16

22 Messages In the top left hand corner you can see if you have any new voice messages: To view and listen to new messages, click the messages link. This will take you to the Messages & Calls page, which is described in Section 10: Messages and Calls. Copyright Education Networks of America, Inc. Page 17

23 Missed Calls This section shows you the most recent calls which you have missed: Dashboard Missed Calls display To see other types of calls, go the Messages & Calls page, described in Section 10: Messages and Calls. Copyright Education Networks of America, Inc. Page 18

24 Call Back 1. Click the number of the caller. 2. Click one of the Dial options available on the menu that appears to connect your call. Call back pop up Copyright Education Networks of America, Inc. Page 19

25 Contacts The Contacts section displays all of your contacts and allows you to search them: To search, enter the letters you want to search for in the text box. The ENA SmartVoice End User Portal will narrow down the contacts displayed as you type. Search Contacts To cancel the search and view all of your contacts, delete the search text you entered. To add, modify or delete contacts, see Section 11: Contacts. Copyright Education Networks of America, Inc. Page 20

26 Calling a Contact 1. Click the number of the contact you wish to call. 2. Click one of the Dial options available on the menu that appears to connect your call. Click to Dial pop up Copyright Education Networks of America, Inc. Page 21

27 Settings Your main settings will be shown at the bottom right of the dashboard. This shows you the current status of your main phone line settings. Dashboard Settings Display In the example above Call Forwarding Immediate, the Follow Me service and Anonymous Call Rejection are all inactive (disabled). To change one of these settings you can either click the link for that setting, or select the Reach Me page, described in Section 12: Reach Me. Copyright Education Networks of America, Inc. Page 22

28 SECTION 10: MESSAGES AND CALLS The Messages & Calls page has a number of sections which you can select by clicking on the tab. Messages & Calls Page Messages Shows you all of your new and stored voice messages Missed Displays the recent calls you have received and not answered Dialed Displays the recent calls you have made, including those made by Click to Dial as described in Section 15: Click to Dial Received Shows the recent calls you have answered Rejected Displays calls you have set up to be rejected using the Reach Me function Deleted Displays messages that you have deleted Each of these sections is described in more detail below. Copyright Education Networks of America, Inc. Page 23

29 Messages This shows you all stored voice messages, both those you have listened to and those you haven't. Unheard messages are shown in bold: Messages & Calls Messages tab Copyright Education Networks of America, Inc. Page 24

30 Listen to a Message To listen to a message click the Play icon to the left of the message ( ). This will pop up a Voic player which loads and plays the message. Voic Player With this player you can: See when the message was received and how long it is. Pause, rewind and fast forward the message. Mute the player or change the volume. Delete the message, or Save it to disk. Close the player. Deleting a Message To delete a voice message, click the delete icon ( ) to the right of the message. Copyright Education Networks of America, Inc. Page 25

31 Marking a Message as Heard Listening to a voice message will mark it as heard. You can mark it as heard without listening to it. Click the icon ( ) to the right of the message and select Mark as heard from the dropdown. Message options drop down menu Marking a Message as New 1. Click the icon ( ) to the right of the message, as shown in the figure above. 2. Select Mark as new from the dropdown. Copyright Education Networks of America, Inc. Page 26

32 Call Back 1. Click the number or name of the caller. 2. Click the Dial option. Call back message sender Add Caller to Contacts 1. Click the number or name of the caller. 2. Select Add to contacts. 3. This will take you to the Contacts page. Enter the details for your new contact and click Save. See Section 11: Contacts for more information on using the Contacts page. Copyright Education Networks of America, Inc. Page 27

33 Missed The Missed section shows you the recent calls that you have received but did not answer. Messages & Calls Missed tab If a caller is in your Contacts list then their name will be shown instead of their number, and an icon indicating which of that Contact's numbers they used to call you. Copyright Education Networks of America, Inc. Page 28

34 Dialed This page shows you all of the recent calls you have made, including those which you made using Click to Dial (described in Section 15: Click to Dial). Messages & Calls Dialed tab Copyright Education Networks of America, Inc. Page 29

35 Received This page shows you all of the recent calls you have answered. Messages & Calls Received tab Copyright Education Networks of America, Inc. Page 30

36 Rejected This page displays calls you have set up to be rejected using the Reach Me function. Setting Up Call Rejection 1. Click Reach Me at the top of screen. 2. Click the Rules tab. 3. Select the Set of Rules you would like to edit to add the rejection option. 4. Click Add New Rule. Copyright Education Networks of America, Inc. Page 31

37 5. From the screen that displays, select caller or type of caller you would like to reject. 6. Click Next. 7. From the screen that displays, select reject the call. 8. Click Finish. 9. You will return to the ENA SmartVoice End User Portal. Click Apply in the bottom right corner to save your changes. Copyright Education Networks of America, Inc. Page 32

38 Deleted This page displays messages that you have deleted. Copyright Education Networks of America, Inc. Page 33

39 Deleting a Single Message 1. Click Messages & Calls. Your messages will display. 2. Click the icon to the right of the message. Copyright Education Networks of America, Inc. Page 34

40 Deleting All Messages 1. Click Messages & Calls. 2. Click Delete All at the bottom left of the screen. Copyright Education Networks of America, Inc. Page 35

41 SECTION 11: CONTACTS The Contacts page consists of a number of different sections, which you can select by clicking on the tabs. Contacts page Contact List Allows you to manage your personal contact list Speed Dials Is where you configure your numeric speed dials Extensions Shows you the extensions within your organization Short Codes Shows you your organization's numeric speed dials Each of these sections is described in more detail below. Copyright Education Networks of America, Inc. Page 36

42 Individual Contacts The Contact List shows you all of your contacts. Contacts Contact List tab Copyright Education Networks of America, Inc. Page 37

43 Searching Contacts To search, enter the letters you want to search for in the text box. The ENA SmartVoice User Portal will narrow down the contacts displayed as you type. Search contacts To cancel the search and view all of your contacts, delete the search text you entered. Copyright Education Networks of America, Inc. Page 38

44 Adding a New Contact 1. Click New Contact. New contact page 2. Enter the details for your new contact in the text boxes provided. 3. Enter any phone numbers for your contact in the text boxes provided. You can select the radio button to the right of a number to indicate that it is the preferred number for this contact. 4. Enter any addresses for your contact in the text boxes provided. 5. Click Save. Your new contact will now have been added. Copyright Education Networks of America, Inc. Page 39

45 Editing a Contact 1. Select the contact you wish to edit from the list on the left hand side of the screen. 2. Click Edit. 3. Modify or add any details. 4. Click Save. Copyright Education Networks of America, Inc. Page 40

46 Deleting a Contact 1. Select the contact you wish to delete from the list on the left hand side of the screen. 2. Click Delete. Copyright Education Networks of America, Inc. Page 41

47 Calling a Contact 1. Click the number of the contact you wish to call. 2. Click the Dial option. Calling a Contact from the Contact List tab Copyright Education Networks of America, Inc. Page 42

48 Group Contacts You can manage your contacts by assigning them to groups. For example you might have a group for Work contacts and another group for Personal contacts. Searching Within Group Contacts 1. Select the group you would like search in under Contacts and Groups. 2. To search, enter the letters you want to search for in the text box under Group Members. The ENA SmartVoice Portal will narrow down the contacts displayed as you type. Copyright Education Networks of America, Inc. Page 43

49 Adding a New Group 1. Click New Group. Copyright Education Networks of America, Inc. Page 44

50 2. Enter a name for the group in Group Name. 3. Enter an ID for the group in Telephone ID. Use any number as the Telephone ID. 4. Select any contacts you want to be in the group from the list on the right hand side. 5. Click Save. Copyright Education Networks of America, Inc. Page 45

51 The new group will now appear in the Contacts & Groups section: Editing a Group 1. Select the group on the left hand side. 2. Click Edit. 3. Change the group settings or members. 4. Click Save. Deleting a Group 1. Select the group on the left hand side. 2. Click Delete. Copyright Education Networks of America, Inc. Page 46

52 Speed Dials The Speed Dials section allows you to configure numeric speed dials. You use these speed dials by dialing a two digit speed dial number from your phone. They are different from speed dials which are assigned to particular keys on your phone. For more information on setting up speed dials on your phone's keys see Section 16: Configuring Your Phone's Keys. Adding a Speed Dial 1. Select the Speed Dials tab. 2. Select the number for the speed dial you'd like to set up from the Speed Dial drop down list. Copyright Education Networks of America, Inc. Page 47

53 3. In the Number field, enter the number this speed dial should call as you would dial it. 4. Click Add. 5. Repeat steps 1 through 4 for any other speed dials you want to set up. 6. Click Apply to save your changes. Copyright Education Networks of America, Inc. Page 48

54 Deleting a Speed Dial 1. Click the icon to the right of the speed dial. 2. Click Apply. Copyright Education Networks of America, Inc. Page 49

55 You can also delete all of your speed dials at once. 1. Click Clear List. 2. Click Apply. Copyright Education Networks of America, Inc. Page 50

56 Extensions The Extensions section lists of all the extensions in your organization. Click Extensions to view them. Contacts Extensions tab Copyright Education Networks of America, Inc. Page 51

57 To use Click to Dial to call any of these extensions, follow these steps: 1. Click the number of the extension you wish to call. 2. Select the Dial option. Using Click to Dial from the Extensions tab Your Technology Coordinator sets up these extensions. Copyright Education Networks of America, Inc. Page 52

58 Short Codes The Short Codes section shows you all of the speed dials set up for all the phones in your organization. Click the Short Codes button to view them. Contacts Short Codes tab You can dial these short codes from any phone in the organization to reach the destination. Your Technology Coordinator sets up these short codes. Copyright Education Networks of America, Inc. Page 53

59 SECTION 12: REACH ME (PRO PACKAGE) Reach Me provides you with a powerful rules based routing services allowing you to configure when, where and which calls are delivered to you. You can use the advanced rules based routing to configure an advanced Set of Rules for your incoming calls. For example, you might want to forward calls from family and friends to a home phone, while forwarding calls from the office directly to voic , or to screen calls from a particular number. To configure Reach Me, follow the steps defined in this section. Summary Gives you a description of how incoming calls will be routed. Rules Allows you to view and change your Call Forwarding settings. Weekly Schedule Allows you to apply different rules to your calls based on the time or day of the week they are received. Special Days Use the Special Days section to create exceptions to your regular weekly schedule. Each of these sections is described in more detail below. Copyright Education Networks of America, Inc. Page 54

60 Summary The Reach Me Summary page provides you with a single view of how your calls are currently routing and is the User Portal interface for changing your forwarding setting. From this page you can quickly change your forwarding settings by selecting any radio button under the When I Receive a Call section. Reach Me summary page Copyright Education Networks of America, Inc. Page 55

61 Rules Rules-based routing allows you to configure how calls are routed based on the number that is calling you. Initial Rule Set Up 1. Select Rules on the Reach Me page. 2. If you are setting up rules for the first time, click an example set of rules. Copyright Education Networks of America, Inc. Page 56

62 3. On the screen that displays, note that three sets of rules were created: Normal Reject Calls Screen Calls 4. View the rules in a set by clicking the rule set's name. 5. Add new sets of rules, edit rule sets or delete rule sets from this screen. See the appropriate sections below for more details. Copyright Education Networks of America, Inc. Page 57

63 Adding a New Set of Rules You may want to add a new rule set to route your calls during a given time. For example, if you want your calls routed to voic during lunch, you can create a new rule to do so. 1. From the Reach Me, Rules screen, click Add New Set of Rules. 2. On the screen that displays, enter a name for the new Set of Rules. 3. Click OK. Copyright Education Networks of America, Inc. Page 58

64 4. On the screen that displays, your new rule will appear under Sets of Rules. 5. To add details to your new rule, click Edit. 6. Follow the steps under Editing a Rule in this section. Copyright Education Networks of America, Inc. Page 59

65 Adding a New Rule You may want to define a new "subrule" within a set of rules. For example, you might want calls from a particular person to be routed directly to your voic during normal business hours. 1. Highlight the set of rules under Sets of Rules. 2. Click Add New Rule at the bottom right corner of the screen. Copyright Education Networks of America, Inc. Page 60

66 3. From the screen that displays, begin configuring your rule by selecting which caller or callers the rule will apply to. This individual contact Apply to individual contact (in your contact directory). This group of contacts Apply to a group of contacts as defined in my contact directory. Anyone in my contact list Apply to all callers for which you have a contact defined. Anyone in my organization group Apply to all other members of your organization, with the ENA SmartVoice service. This phone number Apply to a specific phone number. This can be any number. A withheld number Apply to any caller that has restricted their calling number 4. Click Next. Copyright Education Networks of America, Inc. Page 61

67 5. From the screen that displays, select how you want the call to be routed. 6. Click Finish. Copyright Education Networks of America, Inc. Page 62

68 7. If the routing option that you select does not involve more than one phone being called, click Finish to complete your rule configuration. If the routing option that you select does involve more than one phone being called, click Next and follow the steps below to configure which phones will be called and for how long. a. Add the first phone number to ring by entering it in the Phone Number field b. Enter the start ring time and end ring time for the phone (one ring cycle is 6 seconds, however for mobile phones, you may have to allow more time based on the mobile networks post dial delay) c. Click Add. d. Continue to add numbers as defined in steps 1-3 until all numbers have been added. e. Select the preferred ringtone for your desk phone. f. Select the number to transfer calls to in the event the lines are all busy or not answered. You can choose your voic or any dialable number. g. Click Finish. h. You will be returned to the ENA SmartVoice End User Portal. Click Apply to save your changes. Copyright Education Networks of America, Inc. Page 63

69 Editing a Rule 1. Highlight the rule you want to change. 2. Click Edit. 3. On the screen that displays, make your desired changes. 4. Click Finish. 5. You will be returned to the ENA SmartVoice End User Portal. Click Apply to save your changes. NOTE: All sets of rules also have a default rule. This rule will be used when no other rules have been configured in the set, or if a call is received from a number that is not associated with a rule. For example, if you do not have a rule configured for calls from anonymous numbers, the default rule will be used. To edit a default rule, highlight it by clicking on it, and then click Edit. Copyright Education Networks of America, Inc. Page 64

70 Deleting a Rule 1. Select the rule of set of rules you want to delete. 2. Click the icon to the right of rule. 3. Click Apply to save your changes. Weekly Schedule and Special Days Schedule-based routing allows you to apply different routing rules based on day, time of day, and day of week. Weekly Schedule The Weekly Schedule functionality allows you to apply different routing rules based on time of day and day of week. For instance you may want all calls to ring your desk phone during working hours and ring your mobile phone during lunch or after business hours. When first configuring your weekly schedule, you will be presented with two options. Begin with a sample schedule that you can customize. Begin with a blank schedule that you can set up from scratch. Copyright Education Networks of America, Inc. Page 65

71 For ease of use, select the first option: An example Schedule that you can customize (recommended). Reach Me Weekly Schedule tab 1. Select the period that you want to modify. 2. Using your mouse, point to the day and time you want to change and click the mouse. To change multiple time periods, left click and hold the mouse button and drag across the days and time periods you wish to change. 3. To rename a period, click rename and enter the new name. 4. Click Apply to save your changes. Copyright Education Networks of America, Inc. Page 66

72 Special Days (Holidays) You can define special days such as holidays or days when you are away from the office and would like special call treatments. To configure special days, select the Special Days tab and follow the steps below: Reach Me Special Days tab To select individual special days: 1. Select the month using the key and the year using the key. 2. Click an individual day, or click and drag to select multiple days. 3. Click Apply. To have the system automatically define public holidays: 1. Click Add Public Holidays. 2. Select the holidays you wish to add (US Public Holidays). 3. Click Apply. Copyright Education Networks of America, Inc. Page 67

73 SECTION 13: REACH ME (PLUS PACKAGE) Reach Me provides you with a powerful rules based routing services allowing you to configure when, where and which calls are delivered to you. You can use the advanced rules based routing to configure an advanced Set of Rules for your incoming calls. For example, you might want to forward calls from family and friends to a home phone, while forwarding calls from the office directly to voic , or to screen calls from a particular number. Copyright Education Networks of America, Inc. Page 68

74 To configure Reach Me, follow the steps defined in this section. Summary Gives you a description of how incoming calls will be routed Forwarding Allows you to define how you to forward all incoming calls Follow Me Lets you view and set up an advanced Find Me Follow Me service Screening Lets you screen different types of incoming calls Each of these sections is described in more detail below. Summary The Reach Me Summary page provides you with a single view of how your calls are currently routing and is the User Portal interface for changing your forwarding setting. Reach Me summary page Copyright Education Networks of America, Inc. Page 69

75 Forwarding Forwarding allows you to define how you want all incoming calls forwarded. Immediately This allows you to immediately forward all incoming calls to a specific number. 1. Check the Forward calls immediately box. 2. In the Forward calls to field, enter the phone number you would like calls to be forwarded to. 3. Click Apply to save your changes. Copyright Education Networks of America, Inc. Page 70

76 Busy/No Answer Use the Busy/No Answer option to route your calls if your line is busy or you do not answer. NOTE: If you want to route both busy and unanswered calls the same way, click the Use same call forwarding configuration for both services box. Enter the details of how to forward your calls in the Forward calls when no answer section. See Unanswered Calls below for details on how to set up call forwarding. Copyright Education Networks of America, Inc. Page 71

77 Unanswered Calls NOTE: Make sure the Use same call forwarding configuration for both services box is not checked. 1. Check the Forward calls if you do not answer box. 2. Enter the phone number you want calls forwarded to in the Forward calls to field. 3. Specify the number of seconds before the call is forwarded in the Forward unanswered call after field. 4. Click Apply to save your changes. Copyright Education Networks of America, Inc. Page 72

78 Busy Calls NOTE: Make sure the Use same call forwarding configuration for both services box is not checked. 1. Check the Forward calls if your line is busy box. 2. Enter the phone number you want calls forwarded to in the Forward calls to field. 3. Click Apply to save your changes. Copyright Education Networks of America, Inc. Page 73

79 Selected Callers 1. Check the box to the left of Forward calls immediately if they are from selected callers. 2. Click Edit List. Copyright Education Networks of America, Inc. Page 74

80 3. The Select Call Forwarding Screen List box will display. You can add new numbers or numbers from your contact list to the forwarding list. New Numbers o Select List. o Enter the number you would like to have forwarded. o Click Add New. o Add as many numbers to forward as necessary using the same method. o Click OK when you are done. Copyright Education Networks of America, Inc. Page 75

81 Numbers from Your Contact List o From the Selective Call Forwarding Screening List box, select Contacts. o Check the box to the left of the contact(s) to forward. NOTE: You can add multiple contacts at once. o Click OK when you are done. Copyright Education Networks of America, Inc. Page 76

82 4. You will be returned to the Selected Callers screen. Under Options, enter the number you would like your calls forwarded to. 5. Click Apply to save your changes. Copyright Education Networks of America, Inc. Page 77

83 Forwarding Destinations Use the Forwarding Destinations tab to enter numbers you frequently forward calls to. 1. Under New Destination, enter a name for the destination you would like to forward calls to in the Destination field. For example, enter home or cell. 2. In the Number field, enter the appropriate phone number. 3. Click Add. 4. Follow steps 1 through 3 to add as many numbers as necessary. 5. Click Apply to save your changes. Copyright Education Networks of America, Inc. Page 78

84 Follow Me (ENA SmartVoice Plus Package) When forwarding your calls, you can choose to ring multiple phones sequentially or simultaneously. Sequential Ring Follow Me allows you to create a rule that rings multiple phones one after another. Here s an example. You have a meeting at 2:00, but you are expecting an important call between 2:30 and 3:00. Your meeting may have ended by 2:30, and there s a chance you will be back in your office. Just in case your meeting runs long, you can set up your desk phone to ring first for 20 seconds. If you don t answer, the call can be forwarded and ring at another number (like your cell phone). In a situation like this, take the steps below to set up a rule for sequential ring. 1. Click the box to the left of Forward calls you receive to one or more alternate destinations. 2. Click Add Rule. Copyright Education Networks of America, Inc. Page 79

85 3. In the box that displays, leave My Phone selected from the Destination to ring drop down menu. 4. The Telephone Number field will be inactive. 5. Enter the length of time you want your phone to ring in the field after Ring destination for. 6. Select Step 1 from the step drop down menu. 7. Select No to the right of Permit forwarding. 8. Add a brief description of the rule in the Description field (optional). 9. Click OK. 10. The Follow Me screen will display. Click Add Rule in the bottom left corner. Copyright Education Networks of America, Inc. Page 80

86 11. From the Destination to ring drop down menu, select Other. 12. Enter the number you want the call forwarded to in the Telephone Number field. 13. Enter the length of time you want your phone to ring in the field after Ring destination for. 14. Select the next consecutive number that you selected in Step 6. This is what allows one line to ring if the previous line is not answered. For example, if you selected 1 in Step 6, select 2 here. 15. Select No to the right of Permit forwarding. 16. Add a brief description of the rule in the Description field (optional). 17. Click OK. 18. You will return to the Follow Me screen. 19. Click Apply to save your rule. Copyright Education Networks of America, Inc. Page 81

87 Simultaneous Ring You can also use Follow Me to ring multiple phones at once. Here s an example. The departmental secretary has main responsibility for answering calls coming in to the department. If the secretary must step away from the desk, there are two people that cover answering calls. For this situation, a rule can be created to ring the phones of the two people covering for the secretary at the same time. In a situation like this, take the steps below to set up a rule for a simultaneous ring. 1. Click the box to the left of Forward calls you receive to one or more alternate destinations. 2. Click Add Rule. Copyright Education Networks of America, Inc. Page 82

88 3. In the box that displays, leave My Phone selected from the Destination to ring drop down menu. 4. The Telephone Number field will be inactive. 5. Enter the length of time you want the main secretary s phone to ring in the field after Ring destination for. 6. Select 1 from the drop down menu for the step during which you want this phone to ring 7. Select No to the right of Permit Forwarding. 8. Add a brief description of the rule in the Description field (optional). 9. Click OK 10. The Follow Me screen will display. Click Add Rule in the bottom left corner. Copyright Education Networks of America, Inc. Page 83

89 11. In the box that displays, select Other from the Destination to ring drop down menu. 12. Enter the number to ring in the Telephone Number field. 13. Enter the length of time you want that phone to ring in the field after Ring destination for. 14. Select 2 from the step drop down menu. 15. Select No to the right of Permit forwarding. 16. Add a brief description of the rule in the Description field (optional). 17. Click OK. Copyright Education Networks of America, Inc. Page 84

90 18. The Follow Me screen will display. 19. Click Add Rule in the bottom left corner. 20. From the Destination to ring drop down menu, select Other. 21. Enter the other number you want the call forwarded to in the Telephone Number field. 22. Enter the length of time you want that phone to ring in the field after Ring destination for. 23. Select the same step number you selected in Step 14 above. This is what allows both lines to ring at once. For example, if you selected 2 in Step 14, select 2 here. 24. Select No to the right of Permit forwarding. 25. Add a brief description of the rule in the Description field (optional). 26. Click OK. 27. You will return to the Follow Me screen. Click Apply to save your rule. Copyright Education Networks of America, Inc. Page 85

91 Screening You can elect to receive or reject calls from anonymous callers on the Screening tab. 1. The default is to reject all calls from anonymous callers. If you would like to receive anonymous user calls, deselect the box to the left of Reject all calls from anonymous callers. 2. Click Apply to save your changes. Copyright Education Networks of America, Inc. Page 86

92 SECTION 14: REACH ME (PRIME PACKAGE) Reach Me provides you with a powerful rules based routing services allowing you to configure when, where and which calls are delivered to you. You can use the advanced rules based routing to configure an advanced Set of Rules for your incoming calls. For example, you might want to forward calls from family and friends to a home phone, while forwarding calls from the office directly to voic , or to screen calls from a particular number. To configure Reach Me, follow the steps defined in this section. Summary Gives you a description of how incoming calls will be routed. Forwarding Allows you to define how you to forward all incoming calls. Both of these sections are described in more detail below. Copyright Education Networks of America, Inc. Page 87

93 Summary The Reach Me Summary page provides you with a single view of how your calls are currently routing. Reach Me summary page Copyright Education Networks of America, Inc. Page 88

94 Forwarding Forwarding allows you to define how you want all incoming calls forwarded. Immediately This allows you to immediately forward all incoming calls to a specific number. 1. Check the Forward calls immediately box. 2. In the Forward calls to field, enter the phone number you would like calls to be forwarded to. 3. Click Apply to save your changes. Copyright Education Networks of America, Inc. Page 89

95 No Answer Use the No Answer option to route your calls if your line is not answered. 1. Check the Forward calls if you do not answer within a certain period of time box. 2. Enter the phone number you want calls forwarded to in the Forward calls to field. 3. Specify the number of seconds before the call is forwarded in the Forward unanswered call after field. 4. Click Apply to save your changes. Copyright Education Networks of America, Inc. Page 90

96 Forwarding Destinations Use the Forwarding Destinations tab to enter numbers you frequently forward calls to. 1. Under New Destination, enter a name for the destination you would like to forward calls to in the Destination field. For example, enter home or cell. 2. In the Number field, enter the appropriate phone number. 3. Click Add. 4. Follow steps 1 through 3 to add as many numbers as necessary. 5. Click Apply to save your changes. Copyright Education Networks of America, Inc. Page 91

97 SECTION 15: GROUPS The Groups page shows you all of the groups that your phone line is in. If you do not belong to a group, the Groups tab will not appear. Groups page There are two types of groups: Multi Line Hunt Group When a call comes in to a Multi Line Hunt Group, each line in the group will ring in turn until someone answers the call. Based on how your Technology Coordinator has set up your Multi Line Hunt Group, you may be able to log in and out of the Multi Line Hunt Group. When you're logged in, calls to that Multi Line Hunt Group will ring your phone. When you're logged out, they won't. Call Pickup Group If your phone line is in a Call Pickup Group then you can pick up calls that are ringing on any other lines in that group by picking up your phone and dialing the Group Call Pickup code. Copyright Education Networks of America, Inc. Page 92

98 Multi Line Hunt Groups Viewing Multi Line Hunt Groups If your phone line is in a Multi Line Hunt Group (MLHG) then there will be an entry in the Group Membership section for it called MLHG:name. Click this entry to view information for that Multi Line Hunt Group: Groups Multi Line Hunt Groups The following information is shown: The department the Multi Line Hunt Group is in, if any. How many lines are in the group, and how many are logged in. Whether you are currently logged in. Details of each of the lines in this group and whether each line is currently logged in. Your line will be in this list. Copyright Education Networks of America, Inc. Page 93

99 Using Multi Line Hunt Groups Calls that come in to your phone line from a Multi Line Hunt Group will ring your phone as normal, and you can answer the calls as you usually would. If you have permissions to log in and out of the Multi Line Hunt Group, you can either use the User Portal to log in and out, or you can use your phone. Call Pickup Groups Viewing Call Pickup Groups If your phone line is in a Call Pickup Group then there will be an entry in the Group Membership section called CPUG. Click the CPUG entry to view that Call Pickup Group: Groups Call Pickup Groups The following information is shown: The department this Call Pickup Group is in, if any. The number of lines in this Call Pickup Group. The lines which are members of this Call Pickup Group. Your line will be in this list. Copyright Education Networks of America, Inc. Page 94

100 Using Call Pickup To pick up a call that is ringing on another phone in your Call Pickup Group, follow these steps: 1. Pick up your phone handset. 2. Dial the Group Call Pickup access code: *54. Alternatively, if two or more phones are ringing and you want to pick up the call that is ringing on a particular extension number, follow these steps: 1. Pick up your phone handset. 2. Dial the Directed Pickup access code: * Dial the extension number on which the call is ringing. Copyright Education Networks of America, Inc. Page 95

101 SECTION 16: SETTINGS The Settings page consists of a series of tabs allowing you to configure the phone system: ENA SmartVoice End User Portal Settings Page Account Allows you to configure and change some of the settings for your account Calls Allows you to configure your call service options Messages Allows you to configure your messaging settings Notifications Lets you set options for how you wish to receive notifications whenever a new message arrives for you Reminders Lets you manage your reminder calls Copyright Education Networks of America, Inc. Page 96

102 Account The Account tab displays information about your account and allows you to configure or change settings, including your password or PIN. You can also use this tab to configure a SIP desk phone. Settings - Account tab The page is divided into the following panels. Personal Details The Personal Details panel shows you information about your line: Name This shows the name this line is configured as. Your Technology Coordinator can change this if it is incorrect. Department Shows the site with which your line is associated Admin Shows if you are an administrator, and if so, for which department/site Copyright Education Networks of America, Inc. Page 97

103 Security The Security panel allows you to change your Portal password and Voic PIN. Changing Your ENA SmartVoice End User Portal Password 1. Click Change next to Account Password. 2. Enter your current password in the Current password text box. 3. Enter your new password in the Password text box. 4. Enter your new password in the Confirm password text box. 5. Click Confirm. Call Services PIN ENA SmartVoice does not utilize the Call Services PIN. Changing Your ENA SmartVoice End User Portal Voic PIN Use your Voic PIN to access your voic from your phone. 1. Click Change next to the Voic PIN that you want to change. 2. Enter the new PIN in the New PIN text box. 3. Click Confirm. Devices The Devices panel shows you the phones and other devices that you currently have configured for your account. If you have a SIP desk phone, you can use the Devices panel to configure settings for it by clicking set keys next to its number. This will launch the Phone Configurator, which is described in Chapter 16: Configuring Your Phone's Keys. Copyright Education Networks of America, Inc. Page 98

104 Calls The Calls tab allows you to configure your call service options. Settings - Calls tab Copyright Education Networks of America, Inc. Page 99

105 The page is divided into the following panels. General Enables you to configure call settings, including caller ID options Call Blocking Lets you configure what types of outgoing calls should be blocked from your line: To block certain types of call, follow these steps: 1. Click Call Blocking. 2. Check the type of call you want to block. 3. Click Apply. To unblock a type of call, follow these steps: 1. Click Call Blocking. 2. Uncheck the type of call you want to allow. 3. Click Apply. The remaining panels on this page relate to particular call features. You will only see these panels if you have access to these services. Copyright Education Networks of America, Inc. Page 100

106 Messages The Messages tab lets you change the operation of your voice messaging service. Settings - Messages tab Copyright Education Networks of America, Inc. Page 101

107 This page is divided into the following panels. General Lets you configure some general messaging settings o Incoming calls are forwarded to voic after Configure how many seconds must pass before incoming calls are forwarded to your voic . o Enable live screening Live screening rings your phone with a different ringtone when a caller is being sent to voic . You can pick up the phone and hear the voic as it is being recorded without the caller knowing that you are listening in. This feature is only available with ENA SmartVoice Pro. o Forward messages as s When you receive a voic you will be notified via . Selecting Forward messages as s will attach the voic to the notification . You can add a destination address by clicking the add an address link. You will then be able to manually add an address or choose from your existing contacts. o You can also choose whether you want to leave a copy of any forwarded messages in your inbox or whether they should be deleted. Once you have made any changes, you should click Apply to confirm your choices. Mailbox Access Lets you configure your voice mailbox o Configure your mailbox so that it logs you directly into your mailbox when you collect your messages. o Configure your mailbox so that it automatically plays your new messages when you log in. o Determine the content that is played back when you access your voic (the details, the message or both). Once you have made any changes, you should click Apply to confirm your choices. Copyright Education Networks of America, Inc. Page 102

108 Voic Greeting Lets you configure your default and alternative greetings o Select your default greeting. o Record an extended absence greeting and decide if you want to allow callers to leave a message when you are out on an extended absence. From the Use the greeting drop down menu, select Extended Absence. Click Record. Record your greeting. Click Save. o Decide if you want to play a different message to callers from within your business group/organization. Once your edits are complete, click Apply to save your changes. Copyright Education Networks of America, Inc. Page 103

109 Notifications The Notifications tab allows you to set options for how you wish to receive notifications whenever a new message arrives for you. Settings - Notifications tab Copyright Education Networks of America, Inc. Page 104

110 This page is divided into the following tabs. MWI Tab Use the MWI tab to configure whether your phone should indicate when you have new messages. Messaging Settings MWI Tab To have all new voice messages activate your phone's message waiting indicator, follow these steps: 1. Check All Voic . 2. Click Apply. To have only new urgent voice messages activate your phone's message waiting indicator, follow these steps: 1. Check Urgent Voic . 2. Click Apply. Copyright Education Networks of America, Inc. Page 105

111 Tab The tab allows you to configure notifications, which notify different accounts when different sorts of messages are waiting. Notification settings - tab To add an address to be notified, follow these steps: 1. Check the box to the left of Send notification of incoming messages to the following addresses. 2. Click New Entry. 3. Enter the address. 4. Click Add. 5. Check whether you want notifications for Urgent Voic or All Voic sent to this address. 6. Click Apply. NOTE: This will only send an telling you there are voic s waiting. It will not attach the voic to the . For more information on attaching an incoming voic to the notification , see Messages in this section. Copyright Education Networks of America, Inc. Page 106

112 To delete an address from this list, follow these steps: 1. Click the Cross icon to the right of the address:. 2. Click Apply. To delete all addresses from this list, follow these steps: 1. Click Clear List in the bottom left corner. 2. Click Apply. Outdial Tab The Outdial tab allows you to configure a telephone number that will be called whenever a new message arrives in your account. Outdial Notifications Copyright Education Networks of America, Inc. Page 107

113 Using this tab, you can do the following: Enable or disable the Outdial notifications by clicking the box on the left of Send outdial notification of incoming messages, according to the schedule. When Outdial notifications are disabled, the rest of the screen will be grayed out, and you will not be able to make any changes without enabling Outdial notifications first. Enter or edit a phone number for notifications. Choose which events (Urgent Voic s or All Voic s) will trigger a notification to your chosen number. Control how many times, and at what interval, the system will retry a call if the notification is not acknowledged. Control what you have to do to acknowledge the notification: answer the outdial call or access your voic . Accessing your voic a notification being lost by an outdial call being picked up by an answering machine or by someone else. Configure a schedule containing periods when outdial notifications are sent. During inactive periods (for example overnight) any unheard message will still activate the MWI, but the outdial notification is postponed until the next active period in the schedule. 1. Click the word "schedule" in the sentence Send outdial notification of incoming messages, according to the schedule (at the top of the screen). The Outdial Notification Schedule screen will display. Copyright Education Networks of America, Inc. Page 108

114 2. Select the schedule you want to edit. o Full schedule o Empty schedule o Office hours only 3. Click the days and times you want notifications disabled. Notifications are disabled during time frames displayed in white on your schedule. Notifications are enabled for time frames displayed in gray. NOTE: To enable or disable notifications for a specific time, click the block of time on your schedule. 4. Click Save to save your changes. Copyright Education Networks of America, Inc. Page 109

115 Override Tab The Override tab allows you to override the schedules that you have configured for your pager and outdial notifications and send notifications according to an override profile. Notifications settings - Override tab Using the Override tab, you can do the following: Enable or disable the override profile by clicking the box to the left of Override your outdial and pager notifications, sending them according to schedule. When the override profile is disabled, the rest of the screen will be grayed out and you will not be able to make any changes without enabling the override profile first. Determine what date the override profile will expire. Enter or edit the phone number to send outdial notifications to. Choose which events (Urgent Voic s or All Voic s) will trigger a notification to your chosen number. Copyright Education Networks of America, Inc. Page 110

116 Control what you have to do to acknowledge the notification: answer the outdial call or access your voic . Accessing your voic prevents a notification being lost because the call was picked up by an answering machine or by someone else. Control how many times, and at what interval, the system will retry a call if the notification is not acknowledged. Configure a schedule containing periods when outdial notifications are sent during inactive periods (for example overnight) any unheard message will still activate the MWI, but the outdial notification is postponed until the next active period in the schedule. 1. Click the word "schedule" in the sentence Send outdial notification of incoming messages, according to the schedule (at the top of the screen). 2. The Override Notification Schedule screen will display. 3. Select the schedule you want to edit. o Full schedule o Empty schedule o Office hours only Copyright Education Networks of America, Inc. Page 111

117 4. Click the days and times you want notifications disabled. Notifications are disabled during time frames displayed in white on your schedule. Notifications are enabled for time frames displayed in gray. NOTE: To enable or disable notifications for a specific time, click the block of time on your schedule. 5. Click Save to save your changes. Copyright Education Networks of America, Inc. Page 112

118 Reminders The Reminders tab lets you add and delete reminder calls. Copyright Education Networks of America, Inc. Page 113

119 Adding Reminders 1. To add a new reminder, click New Reminder on the bottom left. 2. The New Reminder screen will display. 3. Enter a description for the reminder in the Description field. 4. Select the phone number to notify from the drop down list. 5. Select when you want the reminder call to happen from the Occurs dropdown list. You can choose for it to happen once on a particular day, every weekday or every day. 6. Enter the time you would like the reminder call using the Time boxes and dropdown list. 7. If you selected Once on from the Occurs drop down menu, select the date for the reminder. 8. Click Add. 9. Click Apply in the bottom right corner of the screen that displays. Copyright Education Networks of America, Inc. Page 114

120 Deleting Reminders 1. Click the cross icon to the right of the reminder in the list:. 2. Click Apply in the bottom right corner. You can also delete all of your reminder calls. 1. Click Clear List in the bottom left corner. 2. Click Apply in the bottom right corner. Copyright Education Networks of America, Inc. Page 115

121 SECTION 17: CLICK TO DIAL You can make a phone call from within the ENA SmartVoice User Portal by clicking Call at the top of the screen. Enter the number you want to dial in the screen that displays. Click to Dial Window Copyright Education Networks of America, Inc. Page 116

122 Calling From Your Regular Phone To make a call from your regular desk phone, enter the phone number you want to call in the Click to Dial window and click Dial. Your phone will ring. When you answer it the number you entered will be called. Click to Dial Call in Progress When the person you called answers, the following will display in the Click to Dial window. Click to Dial Call Connected Copyright Education Networks of America, Inc. Page 117

123 SECTION 18: CONFIGURING YOUR PHONE'S KEYS You configure your phone's keys using the Phone Configurator. 1. Select the Settings page in the ENA SmartVoice End User Portal. 2. Select the Account tab. 3. Under the Devices heading, click set keys. This launches a new browser window for the Phone Configurator. You must have Adobe Flash Player version 9 or later installed to use the Phone Configurator. 4. Click Edit to bring up the configurable view of your phone. Using the Phone Configurator's graphical view Once you have launched the Phone Configurator you will be presented with an image of your phone: Phone Configurator graphical view The examples shown in this document show a Polycom 650. Your phone model may differ from the one shown. Phone Configurator Copyright Education Networks of America, Inc. Page 118

124 You can see whether you can modify a key by hovering your mouse over the key. If the key glows blue you can configure it. If it glows red, you cannot. Configurable key To select a key, click it. This will launch a pop-up allowing you to configure the key: Configuring a key Use the drop-down list to select the operation you would like that key to perform: Configuring a key Copyright Education Networks of America, Inc. Page 119

125 The possible options are as follows (although not all of these options may be enabled on your phone system): Nothing This is used when a key is not assigned a function. Line This key is used for your phone line. Pressing this key will cause the phone to go off-hook and ask you for digits to dial. When calls come into that phone line, this key can be used to answer those calls. Speed Dial This configures the key as a speed dial as described in Section 7: Other Phone Features under Speed Dials. Enter the number you want this Speed Dial to call in the box provided. Monitored Extension This allows you to monitor another line as described in Section 7: Other Phone Features, under Monitoring Other Lines. Enter the number of the extension you want to monitor in the box provided. Enhanced Monitored Extension This allows you to monitor another user s line and see if they are on the phone. This button also allows you to perform a one touch blind transfer to the user. Enhanced Call Park This allows you to push the button to park a call against the designated orbit. The green light will flash to signal a call is parked there. The same button can be used to retrieve the parked call. Park Call This is used to park calls as described in Section 5: Advanced Call Holding under Parking a Call. Retrieve Parked Call This is used to retrieve parked calls as described in Section 5: Advanced Call Holding under Retrieving a Parked Call. Directed Pickup This configures the key as a speed dial to pick up calls ringing on a particular line. Enter the number of the extension you want to pick up calls for in the box provided. Group Pickup This configures the key as a speed dial for the Group Pickup service, described in Section 13: Groups under Call Pickup Groups, Using Call Pickup. Whichever option you chose for your key you may enter a label for the key. If your phone has a display next to the key you configured this label will be shown on the phone display. Copyright Education Networks of America, Inc. Page 120

126 Once you have finished configuring your key click OK. The picture of the phone will be updated with the label you gave your new key assignment. Configured key with label Once you have finished configuring your keys, save your changes by clicking Save changes in the bottom left corner. Your phone will pick up the changes you have made overnight. If you want the phone to apply the changes immediately, reboot it, by unplugging it and plugging it back in. Copyright Education Networks of America, Inc. Page 121

AirePBX End User Guide

AirePBX End User Guide AirePBX End User Guide Third Quarter 2012 Contents 1 Introduction 1-1 2 Making calls 2-1 1. Internally 2-1 2. Externally 2-1 3. Emergency calls 2-1 4. Speaker phone 2-1 5. Ending calls 2-1 3 Answering

More information

End User Guide - Commportal

End User Guide - Commportal End User Guide - Commportal Table of contents Table of contents 3 1 Introducing CommPortal 6 1.1 Accessing 6 1.2 Logging In 6 1.3 Using CommPortal 7 1.4 Getting Help 9 1.5 Refreshing a Page 9 1.6 Logging

More information

Hosted Voice End User Guide Version 1.0 April End User Guide

Hosted Voice End User Guide Version 1.0 April End User Guide Hosted Voice End User Guide Version 1.0 April 2013 End User Guide Contents 1 Introduction... 1 2 Introducing CommPortal... 2 2.1 Accessing and Logging In... 2 2.2 Using CommPortal... 2 2.3 Getting help...

More information

EASY. SMART. POWERFUL. Hosted PBX End User Guide

EASY. SMART. POWERFUL. Hosted PBX End User Guide EASY. SMART. POWERFUL. Hosted PBX End User Guide Contents 1 Introduction... 1-1 2 Making calls... 2-1 2.1 Internally... 2-1 2.2 Externally... 2-1 2.3 Emergency calls... 2-1 2.4 Speaker phone... 2-1 2.5

More information

Digital Phone. End User Guide. Version 7.2 Issue 1 30 Sep Document Number VPM

Digital Phone. End User Guide. Version 7.2 Issue 1 30 Sep Document Number VPM Digital Phone End User Guide Version 7.2 Issue 1 30 Sep 2010 Document Number VPM-777-000 Table of contents!"#$%&'(&)'*+%*+,& -!.! /*+0'12)+3'*& 4! 5! 6"73*8&9"$$,& :!!"#! $%&'(%)**+, -!!"!!./&'(%)**+,

More information

Altice Business Hosted Voice. End User Guide. v

Altice Business Hosted Voice. End User Guide. v Altice Business Hosted Voice End User Guide v03-27-18 Contents 1 Introduction... 1-1 1.1 Accessing... 1-1 1.2 Logging into CommPortal BG Admin... 1-2 2 Introducing CommPortal... 2-1 2.1 Accessing... 2-1

More information

ACC-1143 PUG. Polycom 4 and 6-Line Desk Phone Quick Reference Guide

ACC-1143 PUG. Polycom 4 and 6-Line Desk Phone Quick Reference Guide ACC-1143 PUG Polycom 4 and 6-Line Desk Phone Quick Reference Guide Table of Contents INTRODUCTION TO YOUR POLYCOM 4 OR 6-LINE DESK PHONE... 2 WELCOME... 2 DESK PHONE... 2 HOW TO USE YOUR VERTICAL 4-LINE

More information

CommPortal User Guide

CommPortal User Guide CommPortal User Guide Broadband and Voice Applications Turn your web browser into your personal call center CommPortal is an interactive web program that allows you to check your VoiceMail, set preferences

More information

Table of Contents. End User Training Participant Guide. Polycom VVX 300 and 400 Series Phones

Table of Contents. End User Training Participant Guide. Polycom VVX 300 and 400 Series Phones Table of Contents End User Training Participant Guide Overview to your ENA SmartVoice System...1 What is the ENA SmartVoice System?...1 Is ENA SmartVoice difficult to learn?...1 Why is it important to

More information

SIP Communicator Spitfire S300 User Guide

SIP Communicator Spitfire S300 User Guide SIP Communicator Spitfire S300 User Guide 1 TABLE OF CONTENTS Handset Description Page 3 Keypad Lock Page 6 Directory Page 6 Adding an Entry. Page 6 Edit or Delete an Entry Page 7 Black List Page 7 Dialing

More information

Table of Contents. Phone Configuration

Table of Contents. Phone Configuration User Manual 3.60 Table of Contents Phone Configuration... 1-5 Buttons... 1 Placing a Call... 1 Answering a Call... 2 DND... 2 Redial... 2 Call List / Callers... 2 Contacts... 2 Paging... 3 Transferring

More information

SNOM 360 USER GUIDE TABLE OF CONTENTS

SNOM 360 USER GUIDE TABLE OF CONTENTS SNOM 360 USER GUIDE TABLE OF CONTENTS Keypad 2 &3 Dialling a phone number 4 Incoming calls 4 Accepting a call 4 Denying/ Blocking a call 5 Hold and Resume 5 Transfer: 6 Direct Transfer 6 Transfer to voicemail

More information

Vertical 2-Line Desk Phone Quick Reference Guide

Vertical 2-Line Desk Phone Quick Reference Guide Contact your Sales Representative for more information. Table of Contents Introduction to your Xcelerator Desk Phone... 3 How to use your Xcelerator Desk Phone... 3 Answering and making calls... 3 Handling

More information

Polycom Soundpoint 650 IP Phone User Guide

Polycom Soundpoint 650 IP Phone User Guide 20 19 18 17 16 1 2 15 14 13 12 This guide will help you to understand and operate your new IP Phone. Please print this guide and keep it handy! 3 11 For additional information go to: http://www.bullseyetelecom.com/learning-center

More information

Polycom VVX User Guide

Polycom VVX User Guide Polycom VVX 500-600 User Guide Polycom VVX 500-600 Features USB port for external video camera Message waiting indicator Home/Lines key Speaker Dialpad Security slot (on side) Colour touchscreen display

More information

Logging Into the Web Portal

Logging Into the Web Portal V0610 Logging Into the Web Portal Open your Web browser application. In the address field, enter the external WebPortal address, https://lightpathvoice.com Click Go. In the Phone Number field, enter your

More information

Cisco 8841/8851/8861 Dial Plan

Cisco 8841/8851/8861 Dial Plan Cisco 8841/8851/8861 Dial Plan Internal Calls: Dial 5-digit extension External Calls: Site-to Site 5-digit number Domestic: 9+1 Area Code + Number Int l: 9+011+Country Code + Number Emergency External:

More information

1 Page. Digital Voice Services Business User Guide

1 Page. Digital Voice Services Business User Guide 1 Page Digital Voice Services Business User Guide Feature Access Codes *62 Voice Portal *86 Direct Voice Mail Retrieval *77 Anonymous Call Rejection Activation *87 Anonymous Call Rejection Deactivation

More information

Polycom VVX 400 Quick Start Guide

Polycom VVX 400 Quick Start Guide Polycom VVX 400 Quick Start Guide To Answer a call, do any of the following; Lift Handset off cradle Push Speakerphone Key to use speakerphone Push Headset key to use headset (if equipped). If headset

More information

Solutions Reference Guide. IP TalkSM. Voic & Navigator Web Portal

Solutions Reference Guide. IP TalkSM. Voic & Navigator Web Portal IP Talk SM Solutions Reference Guide IP TalkSM Voicemail & Navigator Web Portal Table of Contents Voicemail Accessing Your Voicemail................... 1 Voicemail Main Menu........................ 2

More information

Setting up Polycom VVX phones on the Cloud PBX

Setting up Polycom VVX phones on the Cloud PBX Setting up Polycom VVX phones on the Cloud PBX This document outlines the set-up and use of Polycom VVX termninals on the Cloud PBX Contents List of Polycom phones that are auto provisioned and tightly

More information

vsuite Home Phone Feature Reference

vsuite Home Phone Feature Reference vsuite Home Phone Feature Reference Below is a list of features that are included with you new vsuite telephone service. Should you have any questions or problems with a feature please feel free to contact

More information

TPGBizPhone. Standard T42G IP Phone User Guide

TPGBizPhone. Standard T42G IP Phone User Guide TPGBizPhone Standard T42G IP Phone User Guide Contents Overview... 5 Hardware Component Instructions... 5 Icon Instructions... 6 LED Instructions... 7 Customising Your Phone... 8 General Settings... 8

More information

CommPortal Portal Guide

CommPortal Portal Guide CommPortal Portal Guide The User Portal is available at https://userportal.appiaservices.com. Please contact Appia Support at 877-277-4297, option 3, or support@appiaservices.com if you need login information.

More information

Hosted Phone Quick Start Guide. Get the most out of our Hosted Phone service with these handy instructions for the Polycom VVX phone.

Hosted Phone Quick Start Guide. Get the most out of our Hosted Phone service with these handy instructions for the Polycom VVX phone. Hosted Phone Quick Start Guide Get the most out of our Hosted Phone service with these handy instructions for the Polycom VVX 300-310 phone. 1 Contents Equipment......................................................................

More information

Quickstart Guide. Polycom VVX 500/600

Quickstart Guide. Polycom VVX 500/600 Quickstart Guide Polycom VVX 500/600 Polycom VVX 500/600 Features USB port for external video camera Message waiting indicator Home/Lines key Speaker Dialpad Security slot (on side) Colour touchscreen

More information

TELEPHONE BUTTONS & ICONS TOUCHSCREEN OVERVIEW

TELEPHONE BUTTONS & ICONS TOUCHSCREEN OVERVIEW This Telephone Guide describes the various features available to you. Telephone Buttons and Icons describe the physical buttons and keys on the phone, the Touchscreen Overview outlines basic functions

More information

Network Phone - Polycom VVX311 Phone Quick Reference Card

Network Phone - Polycom VVX311 Phone Quick Reference Card Network Phone - Polycom VVX311 Phone Quick Reference Card Dialing Plan Fill in these important numbers for your dialing plan. Number Description My Direct Dial or Extension Operator / Attendant Off-site

More information

Vox Centrex Yealink T29 UserGuide

Vox Centrex Yealink T29 UserGuide Vox Centrex Yealink T29 UserGuide Monique Verto Supreme November 2015 TABLE OF CONTENTS Handset Description Page 2 Keypad Lock Page 5 Directory Page 5 Adding an Entry. Page 5 Edit or Delete an Entry..

More information

PHONE & VOIC - QUICK GUIDE

PHONE & VOIC - QUICK GUIDE PHONE & VOICEMAIL - QUICK GUIDE INTRODUCTION The following guide is designed as a reference guide for the Cisco Model 7960 phone system. Figure 1 Cisco Model 7960 Phone COMMON PHONE FEATURES General Things

More information

COMMPORTAL. A better way to stay connected. SELF SERVICE GUIDE

COMMPORTAL. A better way to stay connected. SELF SERVICE GUIDE COMMPORTAL A better way to stay connected. SELF SERVICE GUIDE 1 TABLE OF CONTENTS WHAT IS COMMPORTAL... HOME TAB... ACCOUNT PHONE + SETTINGS, NO REPLY + BUSY STATUS, + ADVANCED SETTINGS. MESSAGES TAB...

More information

CBV Support CBV Telephone. User Guide. For Cisco 7900 Series IP Phones

CBV Support CBV Telephone. User Guide. For Cisco 7900 Series IP Phones CBV Support 312-416-5142 CBV Telephone User Guide For Cisco 7900 Series IP Phones Contents INTRODUCING YOUR PHONE...4 Getting to Know Your Phone...4 Using Softkeys...6 Navigating Menus...6 Entering Text

More information

Desktop Reference Guide

Desktop Reference Guide Desktop Reference Guide IP550 Telephone Using Your Telephone Your new telephone is a state of the art IP Telephone instrument. It is manufactured by IPitomy for use with the IPitomy IP PBX System. The

More information

East-Central Vermont Community Fiber-Optic Network

East-Central Vermont Community Fiber-Optic Network East-Central Vermont Community Fiber-Optic Network www.ecfiber.net support@ecfiber.net TELEPHONE SERVICE USER GUIDE Your ECFiber telephone service is an advanced Voice Over Internet Protocol (VOIP) system

More information

Polycom VVX 500/600 Features

Polycom VVX 500/600 Features Polycom VVX 500/600 Features USB port for external video camera Message waiting indicator Home/Lines key Speaker Dialpad Security slot (on side) Colour touchscreen display Headset key Speakerphone key

More information

First Communications Cloud IP PBX User Guide (Polycom)

First Communications Cloud IP PBX User Guide (Polycom) First Communications Cloud IP PBX User Guide (Polycom) 2017 Property of First Communications Contents Introduction... 3 General Phone Operations... 4 Polycom VVX 300 Series... 4 Polycom VVX 300 Series

More information

Yealink BASIC PHONE GUIDE T48G POWERED BY XCHANGE TELECOM

Yealink BASIC PHONE GUIDE T48G POWERED BY XCHANGE TELECOM POWERED BY XCHANGE TELECOM UNDERSTANDING THE KEYS ON YOUR The Hard keys may display a fixed function, may be programmed to display extensions or other frequently used functions like Speed Dial. The Soft

More information

Centrex Phone Instructions

Centrex Phone Instructions Centrex Phone Instructions Making a Call To Make a Call: Using the Handset - Lift the handset and dial Using the Speakerphone- Press the Speaker button and dial. To Dial: An internal extension - Dial the

More information

Cloud Unified Communication Platform User Guide

Cloud Unified Communication Platform User Guide Cloud Unified Communication Platform User Guide ITS - Integrated Telemanagement Services, Inc. 4100 Guardian Street #110 Simi Valley, CA 93063 o 805.520.7020 tf 800.876.4487 f 805.520.7030 www.itstelecom.com

More information

Cisco 504G, 514G, 508G, and 303G Initial Setup

Cisco 504G, 514G, 508G, and 303G Initial Setup Cisco 504G, 514G, 508G, and 303G Initial Setup 1 Handset 2 Message Waiting Indicator 3 LCD Screen 4 Line keys 5 Softkey buttons 6 Navigation button 7 Messages button 8 Hold button 9 Setup button 10 Mute

More information

Cisco 8811 Dial Plan. Place a Call. Answer a Call. Put a Call on Hold. Feature and Session Buttons. Your Phone

Cisco 8811 Dial Plan. Place a Call. Answer a Call. Put a Call on Hold. Feature and Session Buttons. Your Phone Cisco 8811 Dial Plan Internal Calls: Dial 5-digit extension External Calls: Site-to Site 5-digit number Domestic: 9+1+ Area Code + Number Int l: 9+011+Country Code + Number Emergency External: 9+911 or

More information

Enterprise Voice SUBSCRIBER GUIDE

Enterprise Voice SUBSCRIBER GUIDE Enterprise Voice SUBSCRIBER GUIDE Conterra Networks Enterprise Voice SUBSCRIBER GUIDE 3 TABLE OF CONTENTS Table of Contents Introduction... 6 Logging in... 6 Navigation Bar, Sub-Menu and Page Layout...

More information

Reference Guide. IP Phone/Calling Features Voice Mail Personal Assistant Toolbar. Dialing. Your Phone Calling Features.

Reference Guide. IP Phone/Calling Features Voice Mail Personal Assistant Toolbar. Dialing. Your Phone Calling Features. TelNet OfficeEdge Complete Polycom SoundPoint 550 IP Phone. Reference Guide IP Phone/Calling Features Voice Mail Personal Assistant Toolbar Dialing To dial phone number or extension Lift your handset and

More information

Avaya IP Office Phone Manual

Avaya IP Office Phone Manual Avaya IP Office Phone Manual Contents 1 PHONES... 3 1.1 Overview of the 5402... 3 1.2 Overview of the 5410... 5 1.3 Overview of the 5420... 7 1.4 Overview of the 1403 / 1603... 9 1.5 Overview of the 1408

More information

End User Guide. FastFind Links. Using Your Desk Phone. Using the User Web Portal. Voic . Answering Rules and Time Frames. Contacts.

End User Guide. FastFind Links. Using Your Desk Phone. Using the User Web Portal. Voic . Answering Rules and Time Frames. Contacts. End User Guide Using Your Desk Phone FastFind Links Using the User Web Portal Voicemail Answering Rules and Time Frames Contacts Phones Music On Hold Call History Profile CONTENTS Contents... ii Introduction...

More information

Cisco IP Phone 7906G and 7911G Basic User Guide

Cisco IP Phone 7906G and 7911G Basic User Guide CISCO IP PHONE 790G AND 7911G Hold Places the active call on hold, resumes a call on hold, and switches between an active call and an incoming call or an active call and a call on hold. 7 Keypad Works

More information

Dear Valued Customer:

Dear Valued Customer: *Revised 5/08 Dear Valued Customer: We proudly welcome you to the Troy Cable Unlimited calling plan. Your Troy Cable Unlimited Voice plan provides digital quality features and affordability you won t find

More information

Quickstart Guide Polycom VVX 400/410

Quickstart Guide Polycom VVX 400/410 Quickstart Guide Polycom VVX 400/410 Polycom VVX 300/310 Features Message Indicator Line Keys Line Keys Soft Keys Speaker Transfer Messages Hold Dialpad Home/Lines key Navigation keys/ Select key Headset

More information

Avaya 9408 User Guide

Avaya 9408 User Guide Avaya 9408 User Guide UW-IT Quick Reference Guide Contents 9408 Telephone Buttons and Features... 3 Description of Icons on the Display... 4 Making and Receiving Phone Calls... 5 Answering a Call... 5

More information

Hosted IP Phone System Administrator Portal Reference Manual (Polycom)

Hosted IP Phone System Administrator Portal Reference Manual (Polycom) Hosted IP Phone System Administrator Portal Reference Manual (Polycom) POPP.com, Inc. All rights reserved. Service 24x7 @ 763-797-7900 or 1-800-234-POPP Page 1 of 50 9/27/18 Table of Contents 1 Introduction

More information

Digital Voice Services Residential User Guide

Digital Voice Services Residential User Guide Digital Voice Services Residential User Guide 2 P a g e * Feature Access Codes *11 Broadworks Anywhere (pulling call to alternate phone) *62 Access Voicemail *72 Call Forwarding Always Activation *73 Call

More information

Advanced Networking, Inc. Telephone Facsimile

Advanced Networking, Inc. Telephone Facsimile Advanced Networking, Inc. Telephone 302-792-9200 Facsimile 302-792-9294 www.advnetwork.com Basic Instructions for Your Grandstream GXP2160 IP Phone Visual Overview of the Phone Making a call 1. Do not

More information

Network Phone - Polycom VVX410 Phone Quick Reference Card

Network Phone - Polycom VVX410 Phone Quick Reference Card Network Phone - Polycom VVX410 Phone Quick Reference Card Dialing Plan Fill in these important numbers for your dialing plan. Number Description My Direct Dial or Extension Operator / Attendant Off-site

More information

UCx User Guide for Nortel M1/CS1000 Digital Phones

UCx User Guide for Nortel M1/CS1000 Digital Phones UCx User Guide for Nortel M1/CS1000 Digital Phones 1. Introduction This User's Guide provides a description of features for the Aries and Taurus series Meridian digital telephone sets as well as analog

More information

Goodbye Key - Ends an active call. The Goodbye key also exits an open list, such as the Options List, without saving changes

Goodbye Key - Ends an active call. The Goodbye key also exits an open list, such as the Options List, without saving changes Aastra 6869i Key Descriptions Goodbye Key - Ends an active call. The Goodbye key also exits an open list, such as the Options List, without saving changes Hold Key - Places an active call on hold. To retrieve

More information

Hosted IP Phone System End User CommPortal Reference Manual (Polycom)

Hosted IP Phone System End User CommPortal Reference Manual (Polycom) Hosted IP Phone System End User CommPortal Reference Manual (Polycom) POPP.com, Inc. All rights reserved. Service 24x7 @ 763-797-7900 or 1-800-234-POPP Page 1 of 42 8/15/18 Table of Contents 1 Introduction

More information

Reference Guide. IP Phone/Calling Features Voic . Dialing. Your Phone Calling Features. Phone Views. To dial phone number or extension.

Reference Guide. IP Phone/Calling Features Voic . Dialing. Your Phone Calling Features. Phone Views. To dial phone number or extension. TelNet OfficeEdge Complete Polycom VVX400 Series IP Phone. Reference Guide. IP Phone/Calling Features Voicemail Dialing Your Phone Calling Features To dial phone number or extension Lift your handset and

More information

Reference Guide. IP Phone/Calling Features Voic Dialing. Your Phone Calling Features. Phone Views. To dial phone number or extension.

Reference Guide. IP Phone/Calling Features Voic Dialing. Your Phone Calling Features. Phone Views. To dial phone number or extension. TelNet OfficeEdge Complete Polycom VVX300 / 310 IP Phone. Reference Guide. IP Phone/Calling Features Voicemail Dialing Your Phone Calling Features To dial phone number or extension Lift your handset and

More information

ENTERPRISE SUBSCRIBER GUIDE

ENTERPRISE SUBSCRIBER GUIDE ENTERPRISE SUBSCRIBER GUIDE Enterprise Subscriber Guide 880 Montclair Road Suite 400 Birmingham, AL 353 www. TABLE OF CONTENTS Table of Contents Introduction...6 Logging In...6 Navigation Bar, Sub-Menu

More information

User Guide: Panasonic KX-UT113

User Guide: Panasonic KX-UT113 User Guide: Panasonic KX-UT113 User Guide Contents: User Guide Contents:... 2 KX-UT113 Button Diagram... 3 Telephone Feature Overview... 4 KX-UT113 Features... 4 Reading the Display... 4 How to Use your

More information

1. Press the TRAN button on the phone. The call is placed on hold and you are returned to dial tone

1. Press the TRAN button on the phone. The call is placed on hold and you are returned to dial tone NewTel Systems Training Worksheet Please write your name and initial after each section of training. Please hand your training sheet to your trainer so that we can make a copy. Once you have initialed

More information

AVAYA 9608 IP Phone QUICK REFERENCE GUIDE

AVAYA 9608 IP Phone QUICK REFERENCE GUIDE AVAYA 9608 IP Phone QUICK REFERENCE GUIDE The phone supports 24 programmable call appearance/feature buttons. The labels for these are displayed in the main display and can be controlled by the adjacent

More information

UCx Feature Guide for Nortel IP phones - with Feature Key mode disabled

UCx Feature Guide for Nortel IP phones - with Feature Key mode disabled UCx Feature Guide for Nortel IP phones - with Feature Key mode disabled Date: 22 November 2016 System: UCx Release: 5.0 Phone models: Nortel IP Phones i20xx Series, 11xx Series and 12xx Series Page 2 of

More information

5320/5330/5340 IP Phone Quick Reference Guide

5320/5330/5340 IP Phone Quick Reference Guide 5320/5330/5340 IP Phone Quick Reference Guide This guide provides information for frequently used features. For more information about these and other features, refer to the user guide. For voice mail

More information

Icon Instructions LED Instructions Touch Screen Display Navigating Menus and Fields Entering Data and Editing Fields

Icon Instructions LED Instructions Touch Screen Display Navigating Menus and Fields Entering Data and Editing Fields ... 4... 5... 5 Icon Instructions... 6 LED Instructions... 7 Touch Screen Display... 8 Navigating Menus and Fields... 10 Entering Data and Editing Fields... 11... 12 General Settings... 12 Backlight...

More information

ENDING A CALL Press the EndCall soft key. Or depending on the call mode, press the speaker button or hang up the handset.

ENDING A CALL Press the EndCall soft key. Or depending on the call mode, press the speaker button or hang up the handset. PLACING A CALL Using the Handset: Pick up the handset. Enter the phone number, wait a few seconds and the call will process. Or enter the phone number first, then pick up the handset. Using the hands-free

More information

TPG BizPhone. Premium T48G IP Phone User Guide

TPG BizPhone. Premium T48G IP Phone User Guide TPG BizPhone Premium T48G IP Phone User Guide Contents Overview... 5 Hardware Component Instructions... 5 Icon Instructions... 6 LED Instructions... 7 Touch Screen Display... 8 Navigating Menu and Fields...

More information

CALNET 3: AT&T Voice DNA : Quick reference guide

CALNET 3: AT&T Voice DNA : Quick reference guide CALNET 3: AT&T Voice DNA: Quick reference guide Polycom SoundPoint IP 321 / 331 CALNET 3: AT&T Voice DNA : Quick reference guide Polycom SoundPoint IP 321 / 331 Version 1.2 Page 2 AT&T Voice DNA : Quick

More information

USER GUIDE USER HELLO! How may we help you?

USER GUIDE USER HELLO! How may we help you? USER GUIDE USER HELLO! How may we help you? User Guide topics at a glance Answer a call 3 Dial a call 4 Place a call on hold 5 Transfer 6 Advanced transfers 7 Conference calling/3-way calling 8 Parking

More information

LG Ericsson IP Phone IP 8802A

LG Ericsson IP Phone IP 8802A LG Ericsson IP Phone IP 8802A 1 1 Message LED 2 3 8 4 9 5 6 7 10 11 12 13 Programmable Keys 14 2 Keys 1 Description of keys Navigation Controls: Left: Use to go to the previous menu in the settings menu.

More information

User Guide. Infinite Voice (Polycom VVX 300/400)

User Guide. Infinite Voice (Polycom VVX 300/400) User Guide Infinite Voice (Polycom VVX 300/400) August 2016 Table of Contents 1. Phone Keys and Views... 2 1.1 Phone Keys and Views... 2 1.1.1 Home View... 2 1.1.2 Lines View... 3 1.1.3 Calls View... 3

More information

Yealink 46G. A Complete Overview for Conversation Users

Yealink 46G. A Complete Overview for Conversation Users Yealink 46G A Complete Overview for Conversation Users Contents Hardware... 3 Soft Keys... 4 Answering a Call... 6 Making a Call... 7 Actions Performed While in a Call... 7 Muting a Call... 7 Placing a

More information

Voic Guide. Access internally Access your mailbox by pressing the Messages/Msgs/MSG key or by dialing Enter your password.

Voic Guide. Access internally Access your mailbox by pressing the Messages/Msgs/MSG key or by dialing Enter your password. Voicemail Guide Access internally Access your mailbox by pressing the Messages/Msgs/MSG key or by dialing 1000. Enter your password. Access externally (if configured on your system) i.e. An option on your

More information

IP Office Platform 11.0

IP Office Platform 11.0 9600 Series Telephone User Guide Issue 13a - (Monday, August 20, 2018) Contents 1. Introduction 1.1 Important Safety... Information 6 1.2 Button Modules... 7 1.3 Phone Keys... 8 1.4 Call Soft Key... Options

More information

The guide is divided into sections which describe how to configure and manage different aspects of the Hosted PBX service for your business group.

The guide is divided into sections which describe how to configure and manage different aspects of the Hosted PBX service for your business group. Welcome This guide is intended to help Business Group Administrators of FairPoint Communications Hosted PBX service to perform the various tasks needed to administer the system, such as: Managing lines,

More information

Polycom VVX500 Series IP Phone Reference Guide Dialing Your Phone Calling Features To dial phone number or extension Phone Views Speakerphone

Polycom VVX500 Series IP Phone Reference Guide Dialing Your Phone Calling Features To dial phone number or extension Phone Views Speakerphone TelNet OfficeEdge Complete Polycom VVX500 Series IP Phone. Reference Guide IP Phone/Calling Features Voicemail. Dialing Your Phone Calling Features To dial phone number or extension Lift handset and dial

More information

User Guide: Polycom SoundPoint IP335 Phone

User Guide: Polycom SoundPoint IP335 Phone User Guide: Polycom SoundPoint IP335 Phone User Guide Contents: User Guide Contents:... 2 IP335 Button Diagram... 3 Telephone Feature Overview... 4 IP335 Features... 4 Reading the Display... 4 How to Use

More information

CALNET 3: AT&T Voice DNA Polycom SoundPoint IP 321 / 331

CALNET 3: AT&T Voice DNA Polycom SoundPoint IP 321 / 331 CALNET 3: AT&T Voice DNA Polycom SoundPoint IP 321 / 331 Version 1.2 2018 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo, Mobilizing Your World and DIRECTV are registered trademarks

More information

User Guide. Business Hosted Voice

User Guide. Business Hosted Voice User Guide Business Hosted Voice 1 This User Guide explains how you can benefit from this service. If you have questions about your service, call our customer service team 24 hours a day 7 days a week

More information

SNOM 820 USER GUIDE TABLE OF CONTENTS

SNOM 820 USER GUIDE TABLE OF CONTENTS SNOM 820 USER GUIDE TABLE OF CONTENTS Buttons & LED s 2 Dialling a phone number 5 Redial Incoming calls 5 Accepting a call 5 Denying/ Blocking a call 6 Hold and Resume 6 Transfer: 6 Direct Transfer 6 Transfer

More information

Multibutton Telephone Quick Reference Guide

Multibutton Telephone Quick Reference Guide Multibutton Telephone Quick Reference Guide Using Your Telephone 1 Due to the flexibility built into the system, your Dialing Codes and Feature Capacities may differ from those in this guide. Check with

More information

For customers in Newnan, GA WEB PORTAL GUIDE. NuLink. NuLink_RES_0117

For customers in Newnan, GA WEB PORTAL GUIDE. NuLink. NuLink_RES_0117 WEB PORTAL GUIDE NuLink NuLink_RES_0117 Web Portal Guide Table of Contents Getting Started...3 Dashboard...4 Messages and Calls...5 Messages...5 Missed Calls...5 Dialed Calls...5 Received Calls...5 Contacts...6

More information

IP Office 9611 Quick Reference Guide

IP Office 9611 Quick Reference Guide Answering Calls To quiet the ringing, press the Ignore soft key. The call will still continue alerting visually and can be answered or ignored. To redirect the call to voicemail, press the To VM soft key

More information

User Guide. Business Hosted Voice

User Guide. Business Hosted Voice User Guide Business Hosted Voice Welcome! We want to help your business connect. We re sure you will enjoy the benefits of these services. Plus our plans will save you money. One call. One bill. One company.

More information

IP Office 9504 Telephone Quick Guide

IP Office 9504 Telephone Quick Guide 9504 Telephone Quick Guide Your 9504 Telephone The supports the 9504 telephones. The phone supports 12 programmable call appearance/feature buttons. The labels for these are displayed in the main display

More information

Advanced Networking, Inc. Telephone Facsimile

Advanced Networking, Inc. Telephone Facsimile Advanced Networking, Inc. Telephone 302-792-9200 Facsimile 302-792-9294 www.advnetwork.com Basic Instructions for Your Grandstream GXP2135 IP Phone With Directed Park Feature Enabled Visual Overview of

More information

Polycom VVX 300 Series

Polycom VVX 300 Series wowforbusiness.com Polycom VVX 300 Series Phone User Guide Basic Phone Functions Table of Contents Placing a Call...2 Ending a Call...3 Local Directory...3 Hold and Resume..4 Answering an Incoming Call....4

More information

Quick Reference Guide.

Quick Reference Guide. TelNet OfficeEdge Complete Cisco SPA500 series phone. Quick Reference Guide. IP Phone/Calling Features VoiceMail Personal Assistant Toolbar Dialing Your Phone Calling Features To dial phone number or extension

More information

Easy Attendant User Guide

Easy Attendant User Guide Welcome Easy Attendant will provide your business with a convenient and virtual means to answer your business incoming telephone calls. Easy Attendant is an easy to use solution that combines advanced

More information

Getting Started 3. Using this Guide 3 Connecting Your Phone 4

Getting Started 3. Using this Guide 3 Connecting Your Phone 4 Table of Contents Getting Started 3 Using this Guide 3 Connecting Your Phone 4 Adjusting the Footstand / Handset Rest 5 Signing In to Your Phone 5 Choosing the Proper Headset 5 An Overview of Your Phone

More information

Hosted PBX Administrator Guide

Hosted PBX Administrator Guide Hosted PBX Administrator Guide Table of Contents 1 INTRODUCTION... 1-1 1.1 PURPOSE OF THIS GUIDE... 1-1 1.2 OTHER GUIDES... 1-1 2 COMMPORTAL BUSINESS GROUP ADMINISTRATOR (BG ADMIN)... 2-1 2.1 ACCESSING

More information

5220, 5215 and 5201 IP Phones and Voic Rev. 3/04

5220, 5215 and 5201 IP Phones and Voic Rev. 3/04 USER GUIDE 5220, 5215 and 5201 IP Phones and Voicemail Rev. 3/04 1 FEATURES ANSWER AN INCOMING CALL Lift handset of ringing telephone PLACE AN OUTGOING CALL Dial outside access code [9] Dial number you

More information

Telstra VVX410 Phone Guide

Telstra VVX410 Phone Guide Select Save Config to Save the Config Your phone will automatically reboot Note 1: Restarting the phone may take a few minutes Note 2: If your phone has been preconfigured the QSetup soft key will not

More information

Cisco 8841 & 8851 IP Phone Quick Reference V 1.2

Cisco 8841 & 8851 IP Phone Quick Reference V 1.2 Cisco 8841 & 8851 IP Phone Quick Reference V 1.2 1. Handset Light Strip 2. Line / Session Buttons 3. Phone Screen 4. Soft Key Buttons* 5. Navigation and Select Button 6. Release Button 7. Hold / Resume

More information

Hosted VoIP End User Guide

Hosted VoIP End User Guide Hosted VoIP End User Guide Table of Contents: 1. Online Portal User Guide...pg 1 2. System Dial Codes... pg 6 3. Phone User Guides: a. PolyCom Guide... pg 7 b. Cisco Guide... pg 10 c. Yealink Guide...

More information

Quick Resource for Crexendo Home Office Suite

Quick Resource for Crexendo Home Office Suite Crexendo Business Solutions Inc. Quick Resource for Crexendo Home Office Suite Crexendo QuickStart Guide 1 Crexendo QuickStart Guide Crexendo Business Solutions Inc. Getting Started Adaptor Installation

More information

Setting up & using your IP Telephone

Setting up & using your IP Telephone Setting up & using your IP Telephone Version: 2.2 Last Edited: 17/01/2017 Welcome to your new IP Telephone! In order to help you get acquainted with your new phone this help sheet provides a basic description

More information

Using Your Telephone. The Soft Keys provide quick and easy access to features - just follow the menu on the display (not available on all models).

Using Your Telephone. The Soft Keys provide quick and easy access to features - just follow the menu on the display (not available on all models). Using Your Telephone Due to the flexibility built into the system, your Dialing Codes and Feature Capacities may differ from those in this guide. Check with your Communications Manager and make a note

More information

Telephone Answering: The system answers the telephone for you when you are either on the phone or away from your desk.

Telephone Answering: The system answers the telephone for you when you are either on the phone or away from your desk. Voicemail Manual Last updated: July 31, 2007 There are two parts to this service: Telephone Answering: The system answers the telephone for you when you are either on the phone or away from your desk.

More information

Press the More key at anytime to scroll across if the feature you need is not visible.

Press the More key at anytime to scroll across if the feature you need is not visible. Display Features The display on your phone is very interactive. As you use the phone the information will change and different features and functions will appear on the display. The 6 buttons above the

More information