Innovative Americans, LLC. HD Media Pack Installation Manual
|
|
- Alan Brian Moody
- 6 years ago
- Views:
Transcription
1 Innovative Americans, LLC HD Media Pack Installation Manual Please read this manual before you begin! Your installation will be EASIER and SAFER if you take a few moments to read this document!! Proudly made in the USA
2 Contents A little about the product... 3 Disclaimer... 3 What s in the Box... 4 What else is in the Box... 5 Tools required for this installation... 6 HD Media Pack TM System... 7 Types of Installations... 8 Pedestal/Stand-alone TV Option:... 8 Wall Mount Option... 9 Installation Instructions HD Media Pack on Free Standing TV Spacers Fasteners HD Media Pack Assembly Viewing Angle Adjustment Wall Mounting Procedure Lock Installation Connections Test Accessories Remote Extenders HD Media Pack Specifications Warranty APPENDIX A VESA Standards APPENDIX B Adapter Assembly
3 A little about the product The intent of the HD Media Pack is to provide the ability to place a component such as a Hi Definition Cable TV box, Satellite Receiver, Wireless Streaming Device, or a Gaming Console behind a flat panel TV. We have spent many hours making this device as compatible as we could with a multitude of Flat Panel TVs, Computer Monitors and the widest range of devices on the market. The result is a diverse product with numerous mounting options. It can function as a wall mount/component container for many different sizes of Flat Panel TVs, or it can be attached to the back of a free standing TV to hide your component(s). With multiple VESA standards supported, you ll find that most TV s from 26 up to 60 will work well with this device. Because of the wide range of TV s available on the market, we have provided spacers and a 90 degree HDMI adapter to accommodate situations where the power cord and video cables are in the way and you need a little additional clearance. Disclaimer THIS PRODUCT HAS BEEN TESTED TO SUPPORT A MAXIMUM WEIGHT OF 120 LBS WHEN LAGGED INTO STRUCTURAL WOODEN STUDS. THIS PRODUCT CANNOT BE ATTACHED SOLELY TO DRYWALL UNDER ANY CIRCUMSTANCES. ANY USE OF ALTERNATE HARDWARE CAN ALSO CREATE A SCENARIO WHERE THE PRODUCT CAN FAIL. THE OWNER AND/OR INSTALLER ASSUME ALL LIABILITY IF NON-SUPPLIED HARDWARE IS USED. 3
4 What s in the Box 4
5 What else is in the Box 5
6 Tools required for this installation Electric Drill Level Phillips Screw Driver M6 Hex Nut Driver Tape Measure Stud Finder M6 Wrench #2 Pencil 6
7 HD Media Pack TM System Missing parts? Replacement parts will be shipped at no charge. Just send an to and let us know what part you re missing. 7
8 Types of Installations Pedestal/Stand-alone TV Option: HD Media Pack mounted behind the TV. Perfect to place a device behind your TV on a dresser or desk. 8
9 Wall Mount Option HD Media Pack contains the component(s) and also mounts the TV to the wall. The illustration below shows a TV mounted parallel to a wall and a TV mounted at one of the available angles. 9
10 Installation Instructions HD Media Pack on Free Standing TV 1. Disconnect the power cord and any other cables attached to the TV. Find a soft, flat surface where you can lay the TV on its front surface without damaging it. (Bed comforters work pretty good!) 2. With the TV face down, you should now be able to identify the VESA pattern (see Appendix A) that the TV supports. You are looking for a 4 - hole square or rectangular pattern on the back of the TV. 3. Take one of the HD Media Pack sides and lay it down on the back of the TV with the three tabs closest to the bottom of the TV. (see image below) 4. Match a bolt pattern on the HD Media Pack with a bolt pattern on the TV. If the Media Pack side panel does not have a matching hole pattern, you will need to use the adapters provided. See Appendix A to determine appropriate adapter arrangement. See Appendix B for proper assembly of adapters to HDMediaPack TM. If none of the bolt patterns match, it may not be a VESA Standard and you will not be able to use the HD Media Pack with this TV. 10
11 Spacers Ensure that all required cables can be plugged into the back of the TV without interference from the HD Media Pack. If the HD Media Pack restricts access to your power or video connections, use the spacers provided to give you clearance to plug them in. We suggest that the spacers only be used when necessary and when mounting the HD Media Pack directly to the TV (without the VESA adapters) as shown below. The VESA adapters included with the HD Media Pack were designed with their own built-in spacers to assist in avoiding any features that may protrude from the back of the TV. 11
12 Fasteners The next step is to determine what screws are best for this installation. Without Spacers: If you are not using the spacers, use qty. 4 of the shorter (10mm) screws and washers. (Use the screw thread/size that fits your TV, as determined in the Test Fit section below.) With Spacers: If you need to use the spacers, then you will use qty. 4 of the longer (25mm) screws and washers. (Use the screw thread/size that fits your TV, as determined in the Test Fit section below.) You can determine what thread you have by test fitting the screws on your TV first. A finger tight fit is the way to go right now. You have the correct screw if it goes in without being forced and it screws flush to the TV without stopping. If you are using spacers, put the screw through the spacer first, then test fit it to the TV. If the screws do not go all the way into the TV or they stop to soon not allowing for a tight fit, then the screws we have supplied to you may not work. NEVER use a tool to FORCE the screws in. Doing so will DAMAGE YOUR TV!! The HD Media Pack was designed to grow with you as your video needs change. Therefore, we strongly recommend that you save any and all extra parts and/or hardware that may be left over after your installation for future use 12
13 HD Media Pack Assembly Using M6 x 10 Screws and M6 Nuts, attach the 2 nd side of the HD Media Pack to the one that is now on the TV. The enclosure depth and viewing angle can be adjusted by selecting different holes on the extending tabs (see Viewing Angle Adjustment on page 14). Pedestal Mount: You can now pick up the TV and put your device into the HD Media Pack. Test for stability! Make sure the unit is installed in such a way that it will not tip over and damage your TV or other items near your TV. Wall Mount: Continue on to Wall Mounting Procedure (page 15). 13
14 Viewing Angle Adjustment As mentioned earlier, HD Media Pack depth and/or viewing angle can be adjusted by selecting different holes on the tabs extending from the side plates. The angle can be adjusted even further using the Extension Straps (included). The Extension Straps attach using M6 x 10 screws and M6 nuts (included). See the images below. 14
15 Wall Mounting Procedure This section describes how to mount the wall bracket. (If you are using a pedestal mount TV, skip this section.) 1. Determine an approximate location where the mounting bar is going to be secured to the wall. 2. Hold the mounting bar on the wall while using a stud finder underneath, identify two wall studs that are within the length of the mounting bar slots and mark the drywall where they are. Use the tape measure and measure from either the floor or the ceiling to put the two marks at the same level on the wall. 3. Hold the level above the mounting bar and line up the mounting rail slots with the stud locations. If necessary, re-mark one of the holes with the #2 Pencil in such a way that the mounting bar will be level after you lag it into the studs. 4. Pre-drill pilot holes, where the 2 marks are located, using a 1/8 drill bit. 5. Using the two 5/16 Lag bolts and two washers supplied, secure the mounting bar to the wall (and into wall studs). 6. Hang the TV, with the HD Media Pack attached, onto the mounting rail. This may require two people depending on the size and weight of the TV. 15
16 Lock Installation After hanging the assembly on the wall, install the included locks as shown in the illustration below using the #8 x ½ thread forming screws (included). These will help to secure your installation in the event that it gets bumped from below with enough force to lift the installation off of the hooks. Connections Make all required cable connections. Use the 90 degree HDMI adapter (supplied) if necessary. Ensure that all wires/cables exiting the back of the unit are properly protected from being pinched, cut, or otherwise damaged. Test Power everything on and test the remote. Does the remote for the device in the HD Media Pack function properly? If so, you re done! Note: Placing your device in the HD Media Pack sideways instead of face down or face up may eliminate the need for a remote extender. The only way to find out is to try it! 16
17 Accessories We have tried to anticipate every installation situation but the vast, and ever changing, selection of components makes that virtually impossible. Therefore, it is possible that there may be some additional products and/or hardware that may be needed for your HD Media Pack to be installed and/or function properly and completely. One accessory we do not supply are 90 degree RCA style adapters. These are readily available on-line and at stores like Radio Shack 90 Degree Style RCA Adapter Remote Extenders Note that many of the newer cable boxes and satellite receivers require a dual band receiver in the remote extender kit. Always read the owner s manual for the device you are trying to control as sometimes the manufacture offers an accessory to relocate the infrared receiver. Remote Extender Installation TIP: Sometimes the hardest part of installing a remote extender is finding the eye or target on the device you wish to control. One simple way to do this is to use a flashlight and shine it on the face of the device in dim lighting. You will see a circle eye behind the plastic bezel of the device you want to control. It is about the diameter of a pencil eraser. Once you locate this you will place the IR Emitter on this region. 17
18 HD Media Pack Specifications Model Code: UPC Code: Product Width: Product Height: HD Media Pack HDMEDIAPACK 18.4" / mm 13.4" / mm Product Depth Max: 3.5" / 89 mm Product Depth Min: 2.2" / 56 mm Package Width Package Height Package Depth Package Weight TV Size Range: Maximum TV Weight: 20.25" / mm 14.50" / mm 3.75" / 95.3 mm 7.00 lbs. / 2.27 kg 26.00" " / 660 mm 1524 mm lbs. / 54.4 kg Mounting Patterns: VESA 75 x 75 VESA 400 X 300 VESA 400 X 400 VESA 100 x 100 VESA 500 X 300 VESA 500 X 400 VESA 200 x 100 VESA 600 X 300 VESA 600 X 400 VESA 200 x 200 VESA 700 X 300 VESA 700 X 400 VESA 400 x 200 VESA 800 X 300 VESA 800 X 400 Warranty Innovative Americans warrants this product to be free of defects for a period of 1 year from the date of purchase. If you have a problem with your unit, send an to: We will repair or replace your device promptly! 18
19 APPENDIX A VESA Standards The VESA Mounting Interface Standard (MIS), is a family of standards defined by the Video Electronics Standards Association for mounting flat panel monitors, TVs, and other displays to stands or wall mounts and is implemented on most modern flatpanel monitors and TVs. Note that smaller TV's MAY NOT require the adapters included in this kit and that you should test fit the HD Media Pack to determine if you need to use the adapters or not. The diagrams on the following pages offer a visual guide on how to place the adapters to accommodate the VESA Mounting patterns supported. 19
20 20
21 21
22 22
23 23
24 24
25 APPENDIX B Adapter Assembly 25
Eaton LCD Lift Flat Panel Display System. Installation Guide
Eaton LCD Lift Flat Panel Display System Eaton LCD Lift Flat Panel Display System Installation Guide Copyright 2011 Eaton Corporation, Worcester, MA, USA. All rights reserved. Information in this document
More informationDYNAVISION D2 TM INSTALLATION MANUAL
DYNAVISION D2 TM INSTALLATION MANUAL Rev 12 Dynavision International 8800 Global Way, West Chester, Ohio 45069 USA EMAIL:info@dynavisiond2.com, WEBSITE: www.dynavisiond2.com, FAX: (905) 294-6327 Unpacking
More informationExtra Large Full Motion TV Mount for Televisions
8008981 TV Size Range: 47 ~ 84 Maximum Weight Capacity: 60 kg/132 lbs Maximum Mounting Pattern: 800 mm x 600 mm (31.4 x 23.6 ) Distance to the Wall: 5.5-45 cm Extra Large Full Motion TV Mount for 47-84
More informationFlat Panel Static Wall Mount MSP-SS (GSM-210)
INSTALLATION INSTRUCTIONS Flat Panel Static Wall Mount (GSM-2) The static wall mount fits most 23 to 30 displays. The mount was designed to adapt to the VESA 75mm/0mm, 0mm/0mm, and 200mm/0mm compliant
More informationTitan Media Cart. Installation and Operation Manual
Titan Media Cart Installation and Operation Manual Table of Contents INTRODUCTION SERVICE AND SUPPORT... 1 PRODUCT RETURNS... 1 UNPACKING... 1 TITAN SINGLE MEDIA CART... 2 TITAN DUAL MEDIA CART... 2 BEFORE
More informationTreadmill Integrated LCD Screen Option. Cardio Theater Integrated Bracket Assembly Instructions
Treadmill Integrated LCD Screen Option Cardio Theater Integrated Bracket Assembly Instructions Table of Contents 1 2 3 4 5 6 Before You Begin... 4 Obtaining Service... 4 Unpacking the Equipment... 4 Important
More information7403 K321. Display Wall Mount. Kit Instructions. Issue A
7403 K321 Display Wall Mount Kit Instructions Issue A ii Revision Record Issue Date Remarks A Nov 2008 First issue 1 Introduction This kit is used in to secure a 7403 Display Head on a vertical surface.
More informationMD-BSL15W / SPRING-LOADED TWIN-ARM. For ( cm) LCD desktop computer. User Manual
MD-BSL15W / SPRING-LOADED TWIN-ARM MONITOR mount For 15 27 (38.1 68.6 cm) LCD desktop computer User Manual Thank you for choosing Gabor. The Gabor MD-BSL15W mounts two 15 27 (38.1 68.6 cm) LCD computer
More informationCycles Integrated LCD Screen Option. Cardio Theater Integrated Bracket Assembly Instructions
Recumbent Upright Cycles Integrated LCD Screen Option Cardio Theater Integrated Bracket Assembly Instructions Table of Contents 1 2 3 4 5 6 7 Before You Begin... 4 Obtaining Service... 4 Unpacking the
More informationUniversal Desktop and Monitor Stand
Universal Desktop and Monitor Stand Installation Instructions Kit P/N: 114-6013 Kit Contents Kit Contents: (1) Stand Assembly (1) VESA Monitor Bracket (1) Bottom Bracket (1) Top Bracket (1) Clamp Bracket
More informationInstallation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays Model: DS-VWT955-2X2 EXTENSION COLUMN (SOLD SEPARATELY) COMPATIBILITY Display width must be a minimum of 36"
More informationThe Minimalist, Modular, Wall-Mounted Standing Desk
The StandCrafted Installation Manual Last Update: 03/04/2016 www.standcrafted.com support@standcrafted.com DISCLAIMERS Copyright StandCrafted LLC. All rights reserved. This document is solely intended
More informationV.I.A. - Monitor Shroud
V.I.A. - Monitor Shroud NOTE: Installing slatwall above a monitor shroud requires modification of the upper horizontal rail. See V.I.A. Slatwall assembly direction 939502328 for installation process. V.I.A.
More informationOne Arm Articulating TV Wall Mount
One Arm Articulating TV Wall Mount Item No: 6360710 MIN:3.07 in / 78 mm MAX:21.65 in / 550 mm MIN: 2.95 x 2.95 in / 75 x 75 mm MAX:3.9 x 3.9 in / 100 x 100 mm 1 Braided HMI 3 Ethernet Cable (6 ft.) Congratulations
More informationEVOLVE1-M MONITOR ARM
EVOLVE1-M MONITOR ARM EVOLVE1-M Rev A 2/17 Model EVOLVE1-M-SLV Model EVOLVE1-M-BLK Model EVOLVE1-M-WHT ASSEMBLY AND ADJUSTMENT EVOLVE1-M MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before
More informationASSEMBLY AND ADJUSTMENT
EDGE-WALL MONITOR ARM EDGE-WALL Rev A 2/17 Model EDGE-WALL-SLV ASSEMBLY AND ADJUSTMENT EDGE-WALL MONITOR ARM PLEASE REVIEW these instructions before beginning the installation. Check that all parts and
More informationFLEXBOX. Installation Guide
FLEXBOX Installation Guide FLEXBOX 1 Important Safety Instructions WEIGHT LIMIT MAXIMUM WEIGHT 50 LBS. THE STRUCTURE TO WHICH THE BOX IS MOUNTED (CEIL- ING, WALL, TABLE, POLE) MUST BE ABLE TO SUPPORT FIVE
More informationDigital Menu Board Wall Mount Installation Instructions
Digital Menu Board Wall Mount Installation MDSWMB2T4249 MDSWMB3T4249 www.microndisplaysolutions.com Table of Contents Important Safety... 3 Models and Specifications... 4 Package Contents... 5 Step 1 Two(2)
More informationMotorized Ceiling TV Mount
Motorized Ceiling TV Mount Instruction Manual SKU: MOUNT-E-FD55 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-e-fd55
More informationINSTALLATION MANUAL DATAVAULT DATAVAULT - BARE JOBSITE STORAGE SOLUTIONS
JOBSITE STORAGE SOLUTIONS ALWAYS ON THE JOB INSTALLATION MANUAL 118-01 DATAVAULT 118-02 DATAVAULT - BARE Werner Co. 724-588-2000 93 Werner Rd. 888-523-3371 toll free/ llamada gratuita Greenville, PA 16125
More informationTABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION
S6 USER S MANUAL TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION SECTION 4 SLIDE CONFIGURATION ACCESSORIES SECTION 5 RACK MOUNT
More informationMD-BD13B / DUAL SEGMENT TWIN-ARM. For (33-69 cm) LCD desktop computer monitors. User Manual
MD-BD13B / DUAL SEGMENT TWIN-ARM MONITOR mount For 13 27 (33-69 cm) LCD desktop computer monitors User Manual Thank you for choosing Gabor. The Gabor MD-BD13B mounts two 13 27 (33 69 cm) LCD computer monitors
More informationInstallation guide. for Cisco TelePresence MX700 Dual Camera mounted on the wall
Installation guide for Cisco TelePresence MX700 Dual Camera mounted on the wall http://www.cisco.com/go/mx-docs This guide covers the MX700 with dual camera, mounted on the wall. Manpower We recommend
More informationInstallation guide. for Cisco TelePresence MX700 Dual Camera on a free standing floor stand or a floor stand secured to the wall
Installation guide for Cisco TelePresence MX700 Dual Camera on a free standing floor stand or a floor stand secured to the wall http://www.cisco.com/go/mx-docs This guide covers the floor stand mounted
More informationInstallation guide. for Cisco TelePresence MX700 Single Camera on a free standing floor stand or a floor stand secured to the wall
Installation guide for Cisco TelePresence MX700 Single Camera on a free standing floor stand or a floor stand secured to the wall https://www.cisco.com/go/mx-docs This guide covers the floor stand mounted
More informationINSTALLATION MANUAL DATAVAULT DATAVAULT - BARE JOBSITE STORAGE SOLUTIONS
JOBSITE STORAGE SOLUTIONS ALWAYS ON THE JOB INSTALLATION MANUAL 118-01 DATAVAULT 118-02 DATAVAULT - BARE Werner Co. 724-588-2000 93 Werner Rd. 888-523-3371 toll free/ llamada gratuita Greenville, PA 16125
More informationDUAL-ARM MONITOR MOUNT For in. ( cm) desktop computer monitors
LeviTouch DM-502 DUAL-ARM MONITOR MOUNT For 15 27 in. (38.1 68.6 cm) desktop computer monitors User Manual Thank you for choosing Gabor. The Gabor Dual-Arm Desktop Mount can securely support two monitors
More informationAssembly and mounting Instructions
PMS-FL Assembly and mounting Instructions Note: Keep your original packaging until assembly is complete. Two persons are required to attach plasma/lcd displays to this mount. If you cannot understand these
More informationVortex Series 2-leg Desk Assembly Guide
ELECTRIC HEIGHT-ADJUSTED SIT TO STAND DESK Vortex Series 2-leg Desk Assembly Guide For desk with underframe Model No. AL4628-XX REV-1509A Table of Contents IMPORTANT SAFETY INSTRUCTIONS... 3 CAUTION, USE
More informationFlex Pro Series Assembly Guide
ELECTRIC HEIGHT-ADJUSTED SIT TO STAND DESK Table of Contents CAUTION, USE & LIABILITY... 2 PARTS & HARDWARE LIST... 3 PARTS / COMPONENT DIAGRAMS... 3 ASSEMBLY INSTRUCTIONS... 5 BLUETOOTH... 10 TROUBLESHOOTING...
More informationRack Installation Instructions
Rack Installation Instructions For System Storage EXP2512 and EXP2524 Express Storage Enclosures Use the instructions in this document to install an IBM System Storage EXP2512 Express Storage Enclosure
More informationC764i Integrated LCD Screen Option. Cardio Theater Integrated Bracket Assembly Instructions
C764i Integrated LCD Screen Option Cardio Theater Integrated Bracket Assembly Instructions Table of Contents 1 2 3 4 5 6 7 Before You Begin... 3 Obtaining Service... 3 Unpacking the Equipment... 3 Important
More informationArticulating Triple Monitor Desk Mount 13" to 27" Installation Instructions
Articulating Triple Monitor Desk Mount 13" to 27" Installation Instructions 04-0708B 1 Unpacking Carefully remove the contents and lay out on cardboard or other protective surface Check package contents
More informationKRONOS INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS TABLE OF CONTENTS ENCLOSURE AND DONGLE ASSEMBLY 1 LIGHTED ENCLOSURES 2-10 2 SLIM ENCLOSURE 11-17 3 WIRED-ETHERNET DONGLE 18-25 4 REAR-OFFSET MOUNT 26-33 5 SIDE-MOUNT 34-41 6 SURFACE
More informationAssembly and Setup Manual
M-11 Series Copyboard/C-11 Series Captureboard Assembly and Setup Manual This is the installation and assembly manual for the M-11 series/c-11 series. To the Customer Specialized techniques are required
More informationLARGE S URGE-PROTECTOR S HELTER
LARGE S URGE-PROTECTOR S HELTER The weather-resistant Large Surge-Protector Shelter (simply referred to as the shelter in this manual) provides protection from the elements for Surge Protectors (not included)
More informationTASER Axon Dock Installation Manual IMPORTANT SAFETY INSTRUCTIONS
TASER Axon Dock Installation Manual IMPORTANT SAFETY INSTRUCTIONS Read all warnings and instructions. Save these instructions. The most up-to-date warnings and instructions are available at www.taser.com
More informationrooms Conference Room Mac Quickstart Guide
rooms Conference Room Mac Quickstart Guide WARNING: IMPROPER INSTALLATION CAN LEAD TO MOUNT FALLING CAUSING SEVERE PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is the installers responsibility to make certain
More informationQuad Monitor Desk Stand - 13" to 24" Installation Instructions
Quad Monitor Desk Stand - 13" to 24" Installation Instructions 04-0885A 1 Unpacking Carefully remove the contents and lay out on cardboard or other protective surface Check package contents against the
More informationxtablet T1600 Vehicle Holder Installation Guide
This document will step you through setting up the T1600 Vehicle Holder installation and tips for a safe, clean and long lasting installation. Preparing to Mount the Vehicle Holder Warning : Dock mounting
More informationLED Lighting Kit For Elara NanoEdge Fixed Frame. Installation Guide. Attention: Read this guide before assembling your screen.
LED Lighting Kit For Elara NanoEdge Fixed Frame Installation Guide Attention: Read this guide before assembling your screen. INTRODUCTION GETTING STARTED WARNING - Sharp Edges This product may contain
More informationAPC Open Frame Rack Networking Solutions
APC Open Frame Rack Networking Solutions NetShelter 2- and 4 Post Open Frame Racks The NetShelter 2 and 4 Post Open Frame Racks offer a quality solution for the economical installation of rackmountable
More informationG12/G12x USER S MANUAL
G12/G12x USER S MANUAL TABLE OF CONTENTS SECTION 1 SLIDE CONFIGURATION SECTION 2 SLIDE CONFIGURATION ACCESSORIES SECTION 3 TABLETOP CONFIGURATION SECTION 4 TABLETOP CONFIGURATION ACCESSORIES SECTION 5
More informationPracticeWire Installation Manual
PracticeWire Installation Manual Version 5.0 August 28 th, 2013 PCM Help Desk 1-877-233-9114 Page 1 Table of Contents System Overview 3 Tool List 4 Installation Guide Site Notification 5 Install Universal
More informationVertiv VR Rack 1.0 GENERAL
1.1 SUMMARY Vertiv VR Rack Guide Specifications 1.0 GENERAL This specification defines the mechanical characteristics and requirements for the Vertiv VR Rack. A series of adaptive and scalable electronic
More informationSystem Storage EXP3000 Rack Installation Instructions
System Storage EXP3000 Rack Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. When you install the IBM System Storage EXP3000 in a
More informationRittalXpress TS IT Enclosure Assemble-to-Order Program
RittalXpress TS IT Enclosure Assemble-to-Order Program DESIGN YOUR DATA CENTER BY THE NUMBERS. Count down to success: 4, 3, 2, 1... Complete four easy steps, your order can be shipped in three days and
More informationNAV-1 Lens Support. NAV-2 Lens Support BEFORE YOU BEGIN
INSTALLATION Lens Support INSTRUCTIONS The Lens Support is compatible with any RPA projector mount. The readily adapts to the following ScreenStar Conversion Lens from Navitar: SSW08 and SST120. LENS SUPPORT
More informationAdapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout
Installation Instructions Adapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout Catalog Numbers 2711-NR5T, 2711P-RAT12E2 Topic Page About This Publication 1 Important User Information 2 About
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 19 20 21 01 07 22 23 13 10 12 08 17 18 11 02 14 15 04 03 16 WELCOME PARTS LIST Thank you for purchasing this HealthPoint Technology Cabinet from Humanscale! Before you begin installing
More informationBasketball Shot Clock Set LX2180 Manual
Basketball Shot Clock Set LX2180 Manual 72 Industrial Boulevard Wrightsville, GA 31096 Phone: (800) 445-7843 Fax: (800) 864-0212 www.electro-mech.com LX2180 Revision 5 February 8, 2013 Table of Contents
More informationArticulated Freestanding Dual Monitor Desk Stand - 13" to 27" Installation Instructions
Articulated Freestanding Dual Monitor Desk Stand - 13" to 27" Installation Instructions 04-1019A 1 Unpacking Carefully remove the contents and lay them out on cardboard or other protective surface Check
More informationInstallation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit
Installation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter on Arm (page 2). 2.
More informationBlackout Shutter Kits with Breathable Wall Light Traps
Blackout Shutter Kits with Breathable Wall Light Traps 2018 Growers Supply All Rights Reserved. Reproduction is prohibited without permission. Maintain controlled airflow without sacrificing blackout environments.
More informationShop Fox Fence Kit Installation Instructions:
Shop Fox Fence Kit Installation Instructions: Please note this installation kit is designed solely for installation on a Shop Fox Classic Fence. Accurate Technology manufactures kits for other saw fences
More informationTECHKNOW, INC. Kiosk Order Confirmation System INSTALLATION MANUAL. Revision Date: July 11, 2012 Part # Version 3.2
document Page 1 of 18 TECHKNOW, INC Kiosk Order Confirmation System INSTALLATION MANUAL Revision Date: July 11, 2012 Part # Version 3.2 Techknow, Inc. 393 Mayfield Road Duncan, SC 29334 www.gotechknow.com
More informationGateway Profile 4 service guide
Gateway Profile 4 service guide Customizing Troubleshooting Contents Replacing Components in Your Gateway Profile 4.................. 1 About this guide.....................................................
More informationT R A N S F O R M I N G T E C H N O L O G I E S, L L C O U T S T A N D I N G A L T E R N A T I V E S I N S T A T I C C O N T R O L
T R A N S F O R M I N G T E C H N O L O G I E S, L L C O U T S T A N D I N G A L T E R N A T I V E S I N S T A T I C C O N T R O L Ohm Metrics Combonation Wrist Strap & Footwear Tester Model PDT700 Instruction
More informationA-dec 586 Ceiling Monitor Mount
Installation Guide A-dec 586 Ceiling Monitor Mount Recommended Tools 7/16" wrench Socket set and ratchet with 6" extension Phillips head and standard screwdrivers Diagonal cutters Level 3/8" drill with
More informationInstallation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate
Installation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate The purpose of this guide is to: 1. Describe mounting
More informationWaiting Room Network Installation Manual
Waiting Room Network Installation Manual Version 5.0 March 27 th, 2013 PCM Help Desk 1-877-233-9114 Page 1 Table of Contents System Overview 3 Tool List 4 Installation Guide 5 Site Notification 5 Install
More informationOhm Metrics. Instruction Manual. Dual Footwear Wrist Strap Tester Model PDT800K
T R A N S F O R M I N G T E C H N O L O G I E S, L L C O U T S T A N D I N G A L T E R N A T I V E S I N S T A T I C C O N T R O L Ohm Metrics Dual Footwear Wrist Strap Tester Model PDT800K Instruction
More informationCellular Shades MOTORIZED SKYLIGHT. Simplicity with rechargeable batteries. Installation & Care Instructions
Cellular Shades MOTORIZED SKYLIGHT Simplicity with rechargeable batteries Installation & Care Instructions 152741B 7/2/2018 GETTING STARTED A few simple tools are required: - Measuring tape - Power drill,
More informationAddendum to the Actalyst Interactive Digital Signage Installation and User s Guide
Addendum to the Actalyst Interactive Digital Signage Installation and User s Guide This addendum contains information about the Actalyst Interactive Overlay that has changed since the release of the Actalyst
More informationINSTRUCTIONS PARTITION INSTALLATION.
2015 FORD 2015 TRANSIT FORD LOW PARTITION ROOF INSTRUCTIONS PARTITION INSTALLATION INSTRUCTIONS www.sortimo.knapheide.com 1 The following instructions detail the procedure for installing a Sortimo By Knapheide
More informationDual TV/Monitor Desk Mount Stand (Duplex Series) Model: DE9E2S-S
Dual TV/Monitor Desk Mount Stand (Duplex Series) Model: DE9E2S-S Instruction Manual Images may different from actual product Disclaimer It is Dyconn s intention to have all the correct information represented
More informationINSTALLATION INSTRUCTIONS
Design and Assembly Envisor components are designed to function as an Equipment Screening System. Modular by Design allows for a more user-friendly installation. This instruction packet is intended to
More informationFloor Standing Pedestal
2336 K052 Floor Standing Pedestal Kit Instructions Issue C Revision Record Issue Date Remarks A Feb 20021 First issue B June 2007 Added pedestal floor bolting procedure C Mar 2011 Added Universal Mounting
More informationDIGITAL Server Rackmount Installation Guide
DIGITAL Server Rackmount Installation Guide Part Number: ER-PCSRA-IA. E01 Digital Equipment Corporation December 1997 The information in this document is subject to change without notice and should not
More informationUPLIFT 4-Leg Height Adjustable Standing Desk (Version v4.1 Control Box)
UPLIFT -Leg Height Adjustable Standing Desk (Version v. Control Box) DIRECTIONS FOR ASSEMBLY AND USE TABLE OF CONTENTS PAGE Safety and Warnings 2 2 Usage 2 3 Parts List 3 Assembly Instructions 5 Desk Placement
More informationSINGLE, BI-PARTING, BYPASSING UP TO 200LBS (CONTACT US FOR HEAVIER PANELS)
PRODUCT SPECIFICATIONS LOKI TOP MOUNT -/8" MINIMUM UP TO 200LBS (CONTACT US FOR HEAVIER PANELS) /4" = '-0" (:6) 5/7/208 DETAIL A SCALE "=' ( : 4) 4 " REQUIRED 2 5 8 " 4 " OPTIONAL 4 " MIN* 7 6 " MAXIMUM
More informationNBS-2X NIMBUS STABILIZER QUICK-START GUIDE
NBS-2X NIMBUS STABILIZER QUICK-START GUIDE PREC AUTIONS Please read and follow these instructions and keep this manual in a safe place. Keep this product away from children. Make sure everything is secure
More informationArticulated Freestanding Triple Monitor Desk Stand - 13" to 27" Installation Instructions
Articulated Freestanding Triple Monitor Desk Stand - 13" to 27" Installation Instructions 04-1020A 1 Unpacking Carefully remove the contents and lay them out on cardboard or other protective surface Check
More informationPREFACE. Thank you for choosing Zen Space Desks. We hope your desk helps you find your zen when being used. Zen Space Desks Team
INSTRUCTION MANUAL PREFACE We are thrilled that you have chosen Zen Space. Congratulations, you have selected one of the most advanced and sophisticated Power Adjustable Workstations available today. Our
More information7409 K570. Generic Pinpad Mount. Kit Instructions. Issue B
7409 K570 Generic Pinpad Mount Kit Instructions Issue B Revision Record Issue Date Remarks A Jun 2009 First issue B Mar 2011 Added 7409 K060 support 1 Introduction This kit provides an arm that is used
More informationSTANDS Speaker Television. All-Steel Speaker Stand SS7725B (page 82)
STANDS Speaker Television SS8800B+ Power Crank-Up Speaker Stand 80 (page 82) All-Steel Speaker Stand SS7725B 1 2 4 7 1 Cl assic Speaker Stand SS7730B 1 0 6 4 9 Upper Shaft Tubing: 1.375"or 1.5" Upper Shaft
More informationSINGLE, BI-PARTING, BYPASSING UP TO 400LBS (CONTACT US FOR HEAVIER PANELS)
PRODUCT SPECIFICATIONS ODEN TOP MOUNT -/8" MINIMUM UP TO 400LBS (CONTACT US FOR HEAVIER PANELS) /4" = '-0" (:6) 4//208 DETAIL A SCALE "=' ( : 4) 4 " REQUIRED 4 " OPTIONAL 2 5 8 " DETAIL C SCALE "=' ( :
More informationDesk Mount Articulating Dual Monitor Arm with Cable Management & Height Adjust
Desk Mount Articulating Dual Monitor Arm with Cable Management & Height Adjust ARMDUAL *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com
More informationWall Mount Accessory Kit for 6 Device Tub
FTT-ACW / FTT600-W Tech Tub2 Wall Mount Accessory Kit for 6 Device Tub Assembly Guide FTT-ACW / FTT600-W_2017_A Check out our other products online at www.copernicused.com For assistance, please contact
More informationWhisperTrac 3000 installation guide
WhisperTrac 3000 installation guide Table of contents WhisperTrac Installation Guide Elements of the WhisperTrac system.................................................... 3 Section 1: Mounting Mounting
More informationHassle-free equipment installation
12U 36in Knock-Down Server Rack Cabinet with Casters StarTech ID: RK1236BKF This server rack provides 12U of storage space in a sleek secure cabinet for storing EIA-310 compliant 19 rackmount devices such
More informationFormulate 20 Vertical Curve
Formulate 20 Vertical Curve FMLT-WV20-03 Formulate TM is a collection of sophisticated, ergonomically designed exhibit booths. Formulate combines state-of-the-art zipper pillowcase dye-sublimated fabric
More informationInstalling the Cisco MDS 9020 Fabric Switch
CHAPTER 2 This chapter describes how to install the Cisco MDS 9020 Fabric Switch and its components, and it includes the following information: Pre-Installation, page 2-2 Installing the Switch in a Cabinet
More informationSteltronic Universal LCD Mounting Bracket Assembly
Steltronic Universal LCD Mounting Bracket Assembly Components necessary to build the bracket assembly A. Main Plate (1 required per pair of monitors) B. Slide Rails (2 required per pair of monitors) C.
More informationAV mounting systems Q4-2009
AV mounting systems Q4-2009 Table of content 1 Table of content 1 SmartMetals projector mounts 2 Universal tube sets 3 Separate tube sets 4 Mirror kit & anti-theft set 5 Universal projector housings 6
More informationDaNI Robot Camera. User Guide V0512
DaNI Robot Camera User Guide 60018 V0512 Materials Included Camera (includes hardware that will not be used) Modem (with power supply that will not be used) Power converter 6" Velcro strip Adhesive tab
More informationUser s Guide TURBO Pinewood Derby Finish Line and Timer Release /31/2011 NewBold Products, Atlanta GA
User s Guide TURBO Pinewood Derby Finish Line and Timer Release 2.1 12/31/2011 NewBold Products, Atlanta GA www.newboldproducts.com 2 1. YOUR SHIPMENT Thank you for purchasing the TURBO, Pinewood Derby
More informationUltra short throw lens installation
Ultra short throw lens installation The ultra short throw lens 0.36 UST GS (P/N: 140-133108-XX) allows you to position your projector as close as possible to your screen or display. Unless otherwise indicated,
More informationUPLIFT 2-Leg Height Adjustable Standing Desk (Version v4 Control Box)
UPLIFT 2-Leg Height Adjustable Standing Desk (Version v4 Control Box) DIRECTIONS FOR ASSEMBLY AND USE TABLE OF CONTENTS Also watch our assembly video http://bit.ly/2qvkeuf PAGE 1 Safety and Warnings 2
More informationCharging Cabinet Owner s Manual
by edugear Charging Cabinet Owner s Manual Before using, please read these operating instructions carefully. They contain important advice concerning the use and safety of your Charging Cabinet. The Charging
More informationWINSTON WORKSTATION INSTALLATION INSTRUCTIONS. STEP 1 COLUMN...Page 2
WINSTON WORKSTATION INSTALLATION INSTRUCTIONS STEP COLUMN...Page 2 STEP 2 MOUNTS Free Standing Base...Page 3 Clamp Mount...Page 4 Thru Mount...Page 5 6 STEP 3 WORK SURFACE...Page 6 8 STEP 4 CENTER BEAM...Page
More informationSNOWBOARD RACK KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 25
SNOWBOARD RACK KIT P/N 2881251 APPLICATION Pro Ride RMK 155 and 163, Axys RMK 155, 163, and 174 BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please
More informationSerial No. OWNER S MANUAL. Installation & Operation
Serial No. OWNER S MANUAL Installation & Operation Table of Contents Safety & Warranty Warnings 01 Parts List 02 GhostBed Electronics Quick Reference Guide... 03 Installation Guide 04 GhostBed Remote Control
More information15U Wall-Mount Server Rack Cabinet - 20 in. Deep - Hinged
15U Wall-Mount Server Rack Cabinet - 20 in. Deep - Hinged Product ID: RK1520WALHM This 15U server or network rack cabinet lets you mount your EIA-310 compliant equipment to the wall, in a secure enclosure
More informationN3240 Installation and Setup Instructions
IBM System Storage N3240 Installation and Setup Instructions Covering the N3240 model GA32-2203-01 Notices Mail comments to: IBM Corporation Attention Department GZW 9000 South Rita Road Tucson, AZ 85744-0001
More informationN3150 Installation and Setup Instructions
IBM System Storage N350 Installation and Setup Instructions Covering the N350 model GC27-426-0 Notices Mail comments to: IBM Corporation Attention Department GZW 9000 South Rita Road Tucson, AZ 85744-000
More informationBlackout Shutter Kits with Breathable Wall Light Traps
Blackout Shutter Kits with Breathable Wall Light Traps 2018 Growers Supply All Rights Reserved. Reproduction is prohibited without permission. Revision date: 05.10.18 Maintain controlled airflow without
More informationInstallation Instructions for AV/VC One Screen Mount Kit
Installation Instructions for AV/VC One Screen Mount Kit AVS/021/SMK1 REFER ALSO TO MAIN INSTALLATION INSTRUCTIONS FOR AV/VC ONE For dual screen installations you will require 2x AVS/021/SMK1 PARTS INCLUDED:
More informationMediaWave MW103 Hospital Digital Network (HDN)
The MediaWave MW103 replaced the AOpen and the Seneca 1.3 and 2.8 players as the common media players for Patient Point (WRN) Waiting Room, (HDN) Hospital Digital Network, and (PWR) PracticeWire installations.
More informationTDM To MiniMech conversion ProceDure
TDM To MiniMech conversion ProceDure (Model 9100 ATM) TDN 07102-00079 Apr 1 2009 CorporATe HeAdquArTers: 522 E. Railroad Street Long Beach, MS 39560 PHONE: (228) 868-1317 FAX: (228) 868-0437 COPYRIGHT
More information