IRENIS HDE-265 HDMI Encoder User s Manual Introduction

Transcription

1 IRENIS HDE-265 HDMI Encoder User s Manual Introduction IRENIS HDE-265 HDMI HD Encoder is used for high-definition video signal (720P / 1080P, etc.) encoding and network transmission, using the latest and high-efficient high-definition digital video compression technology H.265, with the characteristics of reliable, high-definition, low bit rate and low latency. Input the HDMI high-definition video signal to conduct the encoding process, after compression processing of DSP chip, output the standard TS network stream, the launch of product fills the gap in this industry, which is a direct replacement for the traditional capture card or software coding method, using hard-coded, the system is more stable, and image quality is more perfect, which can be used in a wide variety of needs for high-definition video and highresolution and high frame rate acquisition-based IP network transmission, its powerful scalability makes it more easily to respond to the needs of different industries and can be used as live video encoder. Industrial controlled, precision design, small size, easy installation, the power is less than 5W, which is more energy and more stable. Interfaces 1) Power input V / DC input, using 12V1A power supply, if it is 5V input, chose 5V / 2A. 2) Initialization button------it is used to reset the device, when turned on, press and hold for 10 seconds, the device IP will back to factory IP, ) HD video input it is used for HDMI signal input. 4) 1000M network port M Ethernet interface. 5) Status indication if there is internet connection, the display light is on, when there is no network, the light is off. At reset, if the light is not on after 10 seconds, the device is restarted. 6) Power indication--- to indicate if the power is normal 1/16

2 SPECIFICATION Input: Video Resolution Coding Rate Rate Control GOP type Video preprocessing Audio: Encoding format Sampling rate Bit rate HDMI _60i/60P _50i _60p _50p, etc H.264/H Mbps~12Mbps CBR/VBR Adjustable De-interlacing, noise reduction, sharpening AAC MP3 Auto 32K, 44.1K, 48K, 64K, 96K, 128K, 160K, 192K Sampling accuracy 24 bit Code rate 64Kb/s~384Kb/s System: RJ M internet access Head stream HTTP, UTP, RTSP, RTMP,ONVIF protocol Configuration interface WEB operation interface Upgrade The software can be upgraded through internet General: Size (width x length x height) 165*85*24mm Weight Single set 0.3KG Temperature Range -20~60 (working),-20~80 (storage) Power supply 12V/1ADC Power consumption 5W/1 channel 2/16

3 Settings Step 1: Reset & initialization Input the power supply to turn on encoder and hold a pin to press RST on the encoder for 10 seconds, it will be restarted and initialized. The default Route IP of dash board is after initialization. Step 2: Change the administrator s computer IP (example in WIN 7) Set the administrator s computer IP as: * to avoid IP conflicting with dashboard IP (mark * numbers range will be except 31 ) Step 3: Login Dash board in IE Enter in URL address, Default user Name: admin Default password: admin 3/16

4 Step 4. Status Display 4/16

5 Note: Input Status: Display input resolution Mainstream Status: Display mainstream output resolution and access address Secondary flow state: Display secondary stream output resolution and access address Mainstream Live View: First, install the soft of VLC Then you can browse the mainstream video through your PC Secondary Stream Live View: First, install the soft of VLC Then you can browse the secondary stream video through your PC Step 5: Network Settings Changing default dash board IP Note: Default IP is if IP setting is forgotten after changing. You can reset it to default IP follow step 1 above. 5/16

6 Step 6: Mainstream Encoding Setting Main stream setting Enc type: H.264 & H.265 is optional Profile: baseline profile / main profile / high profile Frame rate: 5-60 (when the input resolution is 1080i50, the frame rate will choose 25) Bitrate mode: VBR / CBR Group of picture: 30 Bitrate: K (Network bandwidth setting) Mainstream protocol setting 6/16

7 OSD Setting Image quality settings 7) Step 7. Side stream Encoding Setting Secondary stream Setting Enc type: H.264 & H.265 is optional Profile: baseline profile / main profile / high profile Frame rate: 5-60 (when the input resolution is 1080i50, the frame rate will choose 25) Bitrate mode: VBR / CBR Group of picture: 30 Bitrate: K (Network bandwidth setting) 7/16

8 Sidestream protocol setting 8/16

9 OSD Settings Note: the same with the mainstream setting RTMP(Real Time Streaming Protocol)settings 9/16

10 Sep 1: Set H.264 level: baseline profile Sep 1: Set RTMP protocol: Enable Sep 1: Set RTMP sever IP Sep 4: Set RTMP sever port Sep 5: Set RTMP stream name Sep 6: Sever test: Install software: Flash+Media+Server 3.5 there s no need for serial number when install, both user name and code are 1. Start background software: Open up the file of Flash Player: VideoPlayer.html Type in : rtmp://ip address / rtmp / hdmi,choose live, then can see the image or type in : rtmp:// :1935/live/hdmi choose:live click:play stream 10/16

11 HDMI OSD settings Note: if no need for watermarks, space should be entered in text. VLC decoding configuration 1. How to play video source via VLC VLC software version NO: /16

12 Note: /hdmi can be removed under HTTP protocol streaming. 2. How to streaming video via VLC 12/16

13 13/16

14 Destination Setup Select the streamino Methods and adcl MPEG Transport Stream UDP 0.egacy) V_ d_eo H._2 P3 P4_ Back Next Cancel 14/16

15 8) Audio Setting 9) System settings 15/16

16 16/16