CFD with OpenSource software, 2012
|
|
|
- Colleen Joseph
- 5 years ago
- Views:
Transcription
1 CFD with OpenSource software, 2012 Purpose of the course: To give an introduction to OpenSource software for CFD TogiveanintroductiontoOpenFOAMinorderto getstarted To introduce how to modify OpenFOAM for specific purposes To generate, and make available, new tutorials on OpenFOAM usage ToincreasetheuseofOpenFOAMinSweden(andothercountries) Howtolearnmoreafterthiscourse: Learnbydoing Exchange knowledge with other OpenFOAM users at the Forum Manuals and source code are available free from The D oxygen manual at The OpenFOAM Wiki( The OpenFOAM Portal( The OpenFOAM workshop( Håkan Nilsson, Chalmers/ Applied Mechanics/ Fluid Dynamics 1
2 Svenskt VattenkraftCentrum Acknowledgements: Chalmers Centre for Computational Science and Engineering HrvojeJasakatWikkiLtd. The OpenFOAM Foundation, The OpenFOAM user community Håkan Nilsson, Chalmers/ Applied Mechanics/ Fluid Dynamics 2
3 Time schedule First occasion, two days: (For dates, times and location,see course homepage) Homework... Second occasion, two days: (For dates, times and location,see course homepage) Homework... Third occasion, two days: (For dates, times and location,see course homepage) Projectwork... Project presentations, one or two days: (For dates, times and location,see course homepage) Homework: reviews!!! Hand-in of review, response to reviewer, and updated files Remind me to take breaks! Håkan Nilsson, Chalmers/ Applied Mechanics/ Fluid Dynamics 3
4 Preliminary syllabus for the first and second days Get access to computers and software installations. A short general discussion about CFD. An introduction on how to use the standard solvers, utilities and libraries of OpenFOAM. An introduction on how to post-process using parafoam(paraview). Anintroductiontotheorganizationofthecodeandcases. WewillusetheOpenFOAMUserGuideandProgrammersGuide, andinformationthatcanbefoundintheopenfoamwiki(such as the work by the OpenFOAM Turbomachinery working group) but I will add my personal experience. Homework for next occasion! Håkan Nilsson, Chalmers/ Applied Mechanics/ Fluid Dynamics 4
5 Preliminary syllabus for the third and fourth days An introduction on how to modify the standard solvers, utilities and libraries of OpenFOAM. Wewillhaveadeeperlookintothecodeandmakeourownsolvers, utilitiesandlibraries.forthiswemustknowhowtocompileall, orpart,ofthecode.inparticularwewillhavealookatturbulence models and boundary conditions. WewillusetheOpenFOAMUserGuideandProgrammersGuide asreferencematerial. ItisgoodtoinvestinabookinC++,like C++ Direkt by Jan Skansholm(Studentlitteratur). Afterthesedaysyoushouldbeabletoinvestigatethecodeandfind outwhatitdoes.youshouldalsobeabletomakesimplemodificationstothecode. Homework for next occasion! Håkan Nilsson, Chalmers/ Applied Mechanics/ Fluid Dynamics 5
6 Preliminary syllabus for the fifth and sixth days Other useful tools(see schedule). Advanced OpenFOAM usage and development(see schedule). Aprojectworkshouldbechosen.Theprojectworkshouldendup withatutorialthatshouldbepresentedatthefinaloccasion,and peer-reviewed by the other participants. Start thinking about a project already from the beginning! Homework: The project. Håkan Nilsson, Chalmers/ Applied Mechanics/ Fluid Dynamics 6
7 Preliminary syllabus for the presentation day(s) The tutorials will be presented by all the participants in workshop format, so that all the participants(and the teacher) can follow the instructions on their computers. Slides, written tutorial report, and all needed files must be made available at the course homepage at latest the evening before. Sum-up of the course, and course evaluation. NOTE: Final homework: After this occasion all participants must peer-review the tutorial byanotherparticipantsinordertopassthecourse.anexampleof a good peer-review will be distributen on the course homepage. Each participant should update their tutorial according to the peerreviewsinordertopassthecourse.ashort replytothereviewer, pointing out the changes made, should be attached. Håkan Nilsson, Chalmers/ Applied Mechanics/ Fluid Dynamics 7
8 Learning outcomes Learn how to download, install, compile and run standard OpenFOAM solvers and utilities Learn how to implement solvers and utilities Learn how to implement a turbulence model Learn how to implement a boundary condition LearnthebasicsofC++andobjectorientation LearnhowtodoCFDwithOpenFOAMtogetherwithPython, m4, Gnuplot, Paraview etc. Learn basics of Linux(see link on homepage), Doxygen, Compilation procedures, Debugging, Version Control SystemsandVTK LearnhowtouseOpenFOAMbydoingaprojectwork Also: Help others learn OpenFOAM by writing a tutorial Håkan Nilsson, Chalmers/ Applied Mechanics/ Fluid Dynamics 8
9 References OpenFOAM homepage: OpenFOAM User Guide, Programmers Guide, Doxygen OpenFOAM Wiki: OpenFOAM-extend: and OpenFOAM Forum: OpenFOAM workshop: C++ direkt, Jan Skansholm, Studentlitteratur C genom ett nyckelhål, Håkan Strömberg, Studentlitteratur An introduction to Computational Fluid Dynamics, HKVersteeg&WMalalasekera Computational Methods for Fluid Dynamics, J.H.Ferziger&M.Peric Course homepage: hani/kurser/os_cfd(_year) Håkan Nilsson, Chalmers/ Applied Mechanics/ Fluid Dynamics 9
CFD with OpenSource software
CFD with OpenSource software Purpose of the course: To give an introduction to OpenSource software for CFD To give an introduction to OpenFOAM in order to get started To introduce how to modify OpenFOAM
CFD with OpenSource software
CFD with OpenSource software Purpose of the course: To give an introduction to OpenSource software for CFD To give an introduction to OpenFOAM in order to get started To introduce how to modify OpenFOAM
OpenFOAM directory organization
OpenFOAM directory organization Håkan Nilsson, Chalmers / Mechanics and Maritime Sciences / Fluid Dynamics 1 OpenFOAM directory organization We will first browse the directories graphically in Linux. Below
OpenFOAM directory organization
OpenFOAM directory organization Håkan Nilsson, Chalmers / Mechanics and Maritime Sciences / Fluid Dynamics 1 Prerequisites OpenFOAM directory organization You know how to use OpenFOAM, and how to find
OpenFOAM Turbomachinery Working Group: Progress report
OpenFOAM Turbomachinery Working Group: Progress report Maryse Page and Martin Beaudoin Hydro-Québec, Research Institute Håkan Nilsson Chalmers University of Technology Gothenburg, 21-24 June 2010 About
Debugging OpenFOAM implementations with GDB
Debugging OpenFOAM implementations with GDB (Acknowledgements to Dr. Fabian Peng-Kärrholm) It is impossible to do bug-free programming (trust me!), so you should always verify your implementations. When
Object orientation in C++ and OpenFOAM
Object orientation in C++ and OpenFOAM Håkan Nilsson, Chalmers / Mechanics and Maritime Sciences / Fluid Dynamics 1 Object orientation in C++ and OpenFOAM To begin with: The aim of this part of the course
Basics of C++ in OpenFOAM
Basics of C++ in OpenFOAM Håkan Nilsson, Chalmers / Applied Mechanics / Fluid Dynamics 1 Basics of C++ in OpenFOAM To begin with: The aim of this part of the course is not to teach all of C++, but to give
This offering is not approved or endorsed by OpenCFD Limited, the producer of the OpenFOAM software and owner of the OPENFOAM and OpenCFD trade marks.
Disclaimer This offering is not approved or endorsed by OpenCFD Limited, the producer of the OpenFOAM software and owner of the OPENFOAM and OpenCFD trade marks. Introductory OpenFOAM Course From 8 th
More tutorials. Håkan Nilsson, Chalmers/ Applied Mechanics/ Fluid Dynamics 67
More tutorials Wewillnowlearnhowtousea(small)numberofusefulutilitiesandlibraries. Some of them are described in the UserGuide and ProgrammersGuide, and some ofthemhavebeendiscussedintheforum. Inyourhomeassignmentyouwillbeaskedtogothroughallthewrittentutorials
Examples of how to use some utilities and functionobjects
Examples of how to use some utilities and functionobjects (and some Gnuplot, Python, Matplotlib) Håkan Nilsson, Chalmers / Applied Mechanics / Fluid Dynamics 1 Some utilities and functionobjects We will
Introduction to the Computer Exercices Turbulence: Theory and Modelling R.Z. Szasz, Energy Sciences, LTH Lund University
Introduction to the Computer Exercices Turbulence: Theory and Modelling R.Z. Szasz, Energy Sciences, LTH Lund University Outline VERY short CFD introduction Steps of problem solving The software used:
OpenFOAM for CFD in water power and for international collaboration
OpenFOAM for CFD in water power and for international collaboration ASSOCIATE PROFESSOR HÅKAN NILSSON Outline of the presentation: OpenFOAM for CFD in water power - Overview of flow in Hydro Power Stations
The ERCOFTAC centrifugal pump OpenFOAM case study
The ERCOFTAC centrifugal pump OpenFOAM case study Olivier Petit and Håkan Nilsson Chalmers University of Technology, SVC Maryse Page and Martin Beaudoin Hydro Québec, Research Institute 4 th OpenFOAM workshop
How to implement a new boundary condition
How to implement a new boundary condition Håkan Nilsson, Chalmers / Applied Mechanics / Fluid Dynamics 1 How to implement a new boundary condition The implementations of the boundary conditions are located
Studies of the ERCOFTAC Centrifugal Pump with OpenFOAM
Title 1/20 Studies of the ERCOFTAC Centrifugal Pump with OpenFOAM Olivier Petit Håkan Nilsson Outline Outline Geometry Boundary conditions Method and cases Comparison of numerical results with the available
How to implement a new boundary condition
How to implement a new boundary condition The implementations of the boundary conditions are located in $FOAM_SRC/finiteVolume/fields/fvPatchFields/ To add a new boundary condition, start by finding one
Debugging OpenFOAM implementations with GDB
Debugging OpenFOAM implementations with GDB (Acknowledgements to Dr. Fabian Peng-Kärrholm) It is impossible to do bug-free programming(trust me!), so you should always verify your implementations. Whenyourunintoproblems,suchascodecrash,ormysteriousbehaviour,youalsoneed
AERODYNAMIC OPTIMIZATION OF REAR AND FRONT FLAPS ON A CAR
Student: Giannoni Alberto Professor: Ing. Jan Pralits, Advanced Fluid Dynamics Course Co-Professor: Ing. Matteo Colli AERODYNAMIC OPTIMIZATION OF REAR AND FRONT FLAPS ON A CAR ABSTRACT In this work we
How to implement a new boundary condition
How to implement a new boundary condition The implementations of the boundary conditions are located in $FOAM_SRC/finiteVolume/fields/fvPatchFields/ Toaddanewboundarycondition,startbyfindingonethatdoesalmostwhatyouwant.
Modeling the Cooling Air Flow in an Electric Generator
Modeling the Cooling Air Flow in an Electric Generator 6 th OpenFOAMworkshop Pirooz Moradnia, Håkan Nilsson PennState University, USA 2011-06-14 Pirooz Moradnia, Chalmers/ Applied Mechanics/ Fluid Dynamics
How to implement an application
How to implement an application Håkan Nilsson, Chalmers / Mechanics and Maritime Sciences / Fluid Dynamics 1 Prerequisites How to implement an application You are familiar with the directory structure
A look inside icofoam (and pisofoam) Håkan Nilsson, Chalmers / Applied Mechanics / Fluid Dynamics 235
A look inside icofoam (and pisofoam) Håkan Nilsson, Chalmers / Applied Mechanics / Fluid Dynamics 235 A look inside icofoam TheicoFoam directory consists of the following: createfields.h Make/ icofoam.c
Post-processing in parafoam. Håkan Nilsson, Chalmers / Applied Mechanics / Fluid Dynamics 57
Post-processing in parafoam Håkan Nilsson, Chalmers / Applied Mechanics / Fluid Dynamics 57 Post-processing in parafoam parafoam is the main post-processor distributed with OpenFOAM. As previously mentioned,
MSc/PhD course in CFD with OpenSource software, 2011
MSc/PhD course in CFD with OpenSource software, 2011 Implementation of lift and drag coefficinets in transient condition Developed for OpenFOAM-1.7-x Håkan Nilsson, Chalmers/ Applied Mechanics/ Fluid Dynamics
Contributions to the Turbomachinery Working Group: Case Study: Single-Channel Pump & Function Object: turboperformance
Contributions to the Turbomachinery Working Group: : & Function Object: M. Auvinen 1, N. Pedersen 2, K. Dahl 2, H. Nilsson 3 1 Department of Applied Mechanics, Fluid Mechanics Aalto University 2 Structural
Presentation slides for the course CFD with OpenSource Software 2015
Presentation slides for the course CFD with OpenSource Software 2015 Sebastian Kohlstädt Applied Mechanics/Fluid Dynamics, Chalmers University of Technology, Gothenburg, Sweden 2015-12-08 Sebastian Kohlstädt
Setting up the watersprinkler case
Setting up the watersprinkler case The modifications should be done using the dambreak case, therefore we should copy it to a new directory run mkdir sprinkler cp -r $FOAM_TUTORIALS/multiphase/interFoam/laminar/damBreak
Introductory OpenFOAM Course From 17th to 21st February, Matteo Bargiacchi
Introductory OpenFOAM Course From 17th to 21st February, 2014 Matteo Bargiacchi bargiacchi@wolfdynamics.com This offering is not approved or endorsed by OpenCFD Limited, the producer of the OpenFOAM software
Ulrich Heck, DHCAE-Tools UG. techniques. CastNet: CAD-based Pre-Processor for OpenFOAM. Attributes: Concept of CAD associated mesh and solution set-up
Ulrich Heck, DHCAE-Tools UG CAD geometry based pre-processing for CFD using abstract modeling techniques CastNet: CAD-based Pre-Processor for OpenFOAM Attributes: Concept of CAD associated mesh and solution
Simulations of the vortex in the Dellenback abrupt expansion, resembling a hydro turbine draft tube operating at part-load
Simulations of the vortex in the Dellenback abrupt expansion, resembling a hydro turbine draft tube operating at part-load H Nilsson Chalmers University of Technology, SE-412 96 Gothenburg, Sweden E-mail:
Introductory OpenFOAM Course From 2 nd to 6 th July, Joel Guerrero University of Genoa, DICAT
Introductory OpenFOAM Course From 2 nd to 6 th July, 2012 Joel Guerrero University of Genoa, DICAT Dipartimento di Ingegneria delle Costruzioni, dell'ambiente e del Territorio Your Lecturer Joel GUERRERO
Linux & OpenFOAM Primer v1.1 AOE 3264 Resistance and Propulsion of Ships
Linux & OpenFOAM Primer v1.1 AOE 3264 Resistance and Propulsion of Ships Prof. E.G. Paterson 3 February 2017 1 Computing options Practical engineering analysis using computational fluid dynamics (CFD)
A modified version of the reactingfoam tutorial for LES
A modified version of the reactingfoam tutorial for LES PhD course in CFD with OpenSource software, december 2009 Outline change the reactingfoam solver from RAS to LES download the original tutorial from
The ERCOFTAC centrifugal pump OpenFOAM case-study
3 rd IAHR International Meeting of the Workgroup on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems, October 14-16, 009, Brno, Czech Republic The ERCOFTAC centrifugal pump OpenFOAM case-study
Open Source Computational Fluid Dynamics
Open Source Computational Fluid Dynamics An MSc course to gain extended knowledge in Computational Fluid Dynamics (CFD) using open source software. Teachers: Miklós Balogh and Zoltán Hernádi Department
CSC 1052 Algorithms & Data Structures II: Introduction
CSC 1052 Algorithms & Data Structures II: Introduction Professor Henry Carter Spring 2018 Programming This course... We will investigate a series of data structures and algorithms designed to solve common
Post-processing in parafoam (ParaView-5.0.1)
Post-processing in parafoam (ParaView-5.0.1) The 2018 installation instructions are for ParaView-5.4.1, and for the native/built-in reader. Differences will be pointed out. Note that in some cases there
Fluid Dynamics Software Lab. Flow past an airfoil
Second Summer School on Embodied Intelligence Simulation and Modelling within Embodied Intelligence 27 June - 1 July 2011, Zürich, Switzerland Dr Asimina Kazakidi Foundation for Research and Technology
OpenFOAM Project: Different ways to treat rotating geometries
/*-------------------------------------------------------------------------------------------------------*\ ======== \\ / F ield OpenFOAM: The Open Source CFD Toolbox \\ / O peration \\ / A nd Copyright
Notes on OpenFOAM cases. Daniel Duque Dep. Ciencias Aplicadas a la Ingeniería Naval ETSIN, UPM
Notes on OpenFOAM cases Daniel Duque Dep. Ciencias Aplicadas a la Ingeniería Naval ETSIN, UPM October 11, 2012 Contents 1 Setup 2 1.1 Installation............................ 2 1.2 Session setup...........................
Contact Hours/Week Credit Points L T P Total 1 HU101 English Language & Technical Communication-I PH101 Physics-I
Syllabus to be implemented from the Academic Year 2014-15 First Year First Semester Contact Hours/Week Credit Points 1 HU101 English Language & Technical Communication-I 2 0 0 2 2 2 PH101 Physics-I 3 1
Roll Motion of a Box and Interaction with Free-Surface
CHALMERS UNIVERSITY OF TECHNOLOGY Project work for the PhD course in CFD WITH OPEN SOURCE SOFTWARE Roll Motion of a Box and Interaction with Free-Surface Author: Arash Eslamdoost arash.eslamdoost@chalmers.se
A new hybrid slurry CFD model compared with experimental results
12th OpenFOAM Workshop, University of Exeter 24th-27th July 2017 A new hybrid slurry CFD model compared with experimental results Alasdair Mackenzie 1, Vanja Škurić 2, MT Stickland 1, WM Dempster 1 1.
Second OpenFOAM Workshop: Welcome and Introduction
Second OpenFOAM Workshop: Welcome and Introduction Hrvoje Jasak h.jasak@wikki.co.uk Wikki Ltd, United Kingdom and FSB, University of Zagreb, Croatia 7-9th June 2007 Second OpenFOAM Workshop:Welcome and
Force based motion of a submerged object using immersed boundary method
Cite as: Siggeirsson, E.M.V.: Force based motion of a submerged object using immersed boundary metod. In Proceedings of CFD with OpenSource Software, 2016, http://www.tfd.chalmers.se/~hani/kurser/os_cfd_2016
OpenFOAM. q Open source CFD toolbox, which supplies preconfigured solvers, utilities and libraries.
OpenFOAM q Open source CFD toolbox, which supplies preconfigured solvers, utilities and libraries. q Flexible set of efficient C++ modules---object-oriented. q Use Finite-Volume Method (FVM) to solve systems
Setting up a case for turbomachinery problems. OpenFOAM kurs 2009 Håkan Nilsson Olivier Petit
Setting up a case for turbomachinery problems OpenFOAM kurs 2009 Håkan Nilsson Olivier Petit Outline Pre-processing utilities: import a mesh, mergemesh, stitchmesh, transformpoints, creation of zones and
Pre-compiled applications and utilities in OpenFOAM
Pre-compiled applications and utilities in OpenFOAM Tommaso Lucchini Department of Energy Politecnico di Milano Learning outcome You will learn... the meaning of the words applications, solvers, and utilities
reactingfoam Solver to Calculate Radiative Heat Transfer
reactingfoam Solver Calculate Radiative Heat Transfer By: Sajjad Haider Assignment for the Course CFD with OpenSource software, 2011 Chalmers University of Technology In some combustion devices, involving
Exercise: Implement a rampedfixedvalue boundary condition (for OpenFOAM-2.1.x, and most likely 2.2.x)
Exercise: Implement a rampedfixedvalue boundary condition (for OpenFOAM-2.1.x, and most likely 2.2.x) Håkan Nilsson, Chalmers / Applied Mechanics / Fluid Dynamics 1 Pretend that you are in desperate need
Evoking existing function objects and creating new user-defined function objects for Post- Processing
Cite as: Sankar Raju.N : Evoking existing function objects and creating new user-defined function objects for Post- Processing. In Proceedings of CFD with OpenSource Software, 2017, Edited by Nilsson.
interphasechangefoam
interphasechangefoam This assignment is solved in OpenFOAM 2.0.x. How to apply a heat source to interphasechangefoam to evaporate water. In this presentation will go through the following steps: Short
Adapting chtmultiregionsimplefoam to include the effects of a rotating frame of reference and heat source term
Cite as: Niebles Atencio, B.: Adapting chtmultiregionsimplefoam to include the effects of a rotating frame of reference and heat source term. In Proceedings of CFD with OpenSource Software, 2017, Edited
Organizing Course Content and Information
Organizing Course Content and Information This document includes general overviews for using course organization tools in Canvas. Each tool includes information on reasons to use the tool, instructions
Overview and Recent Developments of Dynamic Mesh Capabilities
Overview and Recent Developments of Dynamic Mesh Capabilities Henrik Rusche and Hrvoje Jasak h.rusche@wikki-gmbh.de and h.jasak@wikki.co.uk Wikki Gmbh, Germany Wikki Ltd, United Kingdom 6th OpenFOAM Workshop,
Efficient use of OpenFOAM in industry
Elmer Technologies: Efficient use of OpenFOAM in industry Author: Oskar Elmgren Elmer Technologies Built on motorsport experience Specializing in product and technology development Simulation and prototype
A look inside icofoam (and pisofoam)
A look inside icofoam (and pisofoam) Håkan Nilsson, Chalmers / Mechanics and Maritime Sciences / Fluid Dynamics 1 A look inside icofoam TheicoFoam directory ($FOAM_SOLVERS/incompressible/icoFoam) consists
DEPARTMENT OF FLUID DYNAMICS CFD SIMULATION OF FLOW OVER A MOCK URBAN SETTING USING OPENFOAM
DEPARTMENT OF FLUID DYNAMICS Budapest University of Technology and Economics CFD SIMULATION OF FLOW OVER A MOCK URBAN SETTING USING OPENFOAM Anikó Rákai Gergely Kristóf, Ph. D. 5th OpenFOAM Workshop Gothenburg
ICMIEE D CFD Analysis of a Straight-bladed Vertical Axis Wind Turbine Using General Grid Interface Method
International Conference on Mechanical, Industrial and Energy Engineering 2018 23-24 December, 2018, Khulna, BANGLADESH ICMIEE18-319 2D CFD Analysis of a Straight-bladed Vertical Axis Wind Turbine Using
SimTK 1.5 Workshop Installation and Components. Jack Middleton September 25, 2008
SimTK 1.5 Workshop Installation and Components Jack Middleton September 25, 2008 SimTKcore Webpage overview Overview of download contents Help with installs and compiling examples during break SimTKcore
Introduction to Abaqus/CFD for Multiphysics Applications
Introduction to Abaqus/CFD for Multiphysics Applications R 6.12 About this Course Course objectives Upon completion of this course you will be able to: Set up and create CFD and FSI models with Abaqus
A FSI tutorial on the axialturbine tutorial case
CFD with OpenSource software A course at Chalmers University of Technology Taught by Håkan Nilsson Project work: A FSI tutorial on the axialturbine tutorial case Developed for FOAM-3.1-ext Case files:
Peer Match Program. Customer
Peer Match Program Customer Slide Content Peer Match Program Summary Roles Defined Become an Advisor Search for Advisors 2 Peer Match Summary What is it? A matchmaking tool in the Customer Community to
Step-by-step guide for the modeling of a simple geometry and solving for its electric field with CAELinux
Step-by-step guide for the modeling of a simple geometry and solving for its electric field with CAELinux 1 Introduction What is CAELinux? CAELinux is a Linux distribution intended to provide a fully functional
How to Use EDpuzzle. 2. On the next screen, click Start tour. This will walk you through a quick tour of what you can do with EDpuzzle.
1 How to Use EDpuzzle 1. Go to edpuzzle.com and click Teacher, start now. 2. On the next screen, click Start tour. This will walk you through a quick tour of what you can do with EDpuzzle. 3. EDpuzzle
An Unsteady-Periodic Flow generated by a Oscillating Moving Mesh
CFD with OpenSource software A course at Chalmers University of Technology Taught by Håkan Nilsson Project work: An Unsteady-Periodic Flow generated by a Oscillating Moving Mesh Developed for OpenFOAM-2.1.x
Click to edit Master title style
Greetings from the Serpent Developer Team 7th International Serpent UGM, Gainesville, FL, Nov. 6 9, 2017 Jaakko Leppänen VTT Technical Research Center of Finland Source code development: Click Jaakko to
VoiceThread Training
VoiceThread Training Contents Introduction... 2 Objectives... 2 Connecting to VoiceThread Initially... 2 Creating a VoiceThread Presentation... 4 Accessing Existing VoiceThread Presentations... 5 Sharing
How many toothpicks are needed for her second pattern? How many toothpicks are needed for her third pattern?
Problem of the Month Tri - Triangles Level A: Lisa is making triangle patterns out of toothpicks all the same length. A triangle is made from three toothpicks. Her first pattern is a single triangle. Her
Tutorial Ten Residence Time Distribution
Residence Time Distribution 4 th edition, Jan. 2018 This offering is not approved or endorsed by ESI Group, ESI-OpenCFD or the OpenFOAM Foundation, the producer of the OpenFOAM software and owner of the
Evaluation of an improved mixing plane interface for OpenFOAM
IOP Conference Series: Earth and Environmental Science OPEN ACCESS Evaluation of an improved mixing plane interface for OpenFOAM To cite this article: M Beaudoin et al 2014 IOP Conf. Ser.: Earth Environ.
Implementation of soot model for aachenbomb tutorial
CFD WITH OPENSOURCE SOFTWARE A COURSE AT CHALMERS UNIVERSITY OF TECHNOLOGY TAUGHT BY HÅKAN NILSSON Project work: Implementation of soot model for aachenbomb tutorial Developed for OpenFOAM-3.0.x Author:
Tutorial Four Discretization Part 1
Discretization Part 1 4 th edition, Jan. 2018 This offering is not approved or endorsed by ESI Group, ESI-OpenCFD or the OpenFOAM Foundation, the producer of the OpenFOAM software and owner of the OpenFOAM
A hybrid slurry CFD model: Euler-Euler to Euler-Lagrange (in development)
MacKenzie, Alasdair (2017) A hybrid slurry CFD model : Euler-Euler to Euler-Lagrange (in development). In: 5th United Kingdom & Éire OpenFOAM User Meeting, 2017-01-16-2017-01-17, University College Dublin.,
A interphasechangefoam tutorial
CFD with OpenSource software A course at Chalmers University of Technology Taught by Håkan Nilsson Project work: A interphasechangefoam tutorial Developed for OpenFOAM-2.0.x Author: Martin Andersen Peer
Turbo Tools and General Grid Interface
Turbo Tools and General Grid Interface Theoretical Basis and Implementation Hrvoje Jasak, Wikki United Kingdom and Germany Turbo Tools and General Grid Interface p. 1 General Grid Interface Objective Present
Find three ordered pair solutions calculator
P ford residence southampton, ny Find three ordered pair solutions calculator Should you actually have guidance with math and in particular with ordered pairs as solutions of linear equations calculator
Summary of the C2.3 test case results
1st International Workshop on High-Order CFD Methods, Nashville, January 7-8, 2012 Institute of Aerodynamics and Flow Technology German Aerospace Center 8. Jan. 2012 1 / 19 Test case C2.3 Compressible
CEE 618 Scientific Parallel Computing (Lecture 10)
1 / 20 CEE 618 Scientific Parallel Computing (Lecture 10) Computational Fluid Mechanics using OpenFOAM: Cavity (2) Albert S. Kim Department of Civil and Environmental Engineering University of Hawai i
Lesson 16: Applying the Properties of Operations to Multiply and Divide Rational Numbers
Lesson 16: Applying the Properties of Operations to Multiply and Divide Rational Student Outcomes Students use properties of operations to multiply and divide rational numbers without the use of a calculator.
This offering is not approved or endorsed by OpenCFD Limited, the producer of the OpenFOAM software and owner of the OPENFOAM and OpenCFD trade marks.
Disclaimer This offering is not approved or endorsed by OpenCFD Limited, the producer of the OpenFOAM software and owner of the OPENFOAM and OpenCFD trade marks. Introductory OpenFOAM Course From 8 th
Implementing third order compressible flow solver for hexahedral meshes in OpenFoam
Tutorial/Report in OpenFoam Course 8 Implementing third order compressible flow solver for hexahedral meshes in OpenFoam Martin Olausson, Chalmers University of Technology, SE-1 9 Gothenburg, Sweden Abstract
OpenFOAM: Open Platform for Complex Physics Simulations
OpenFOAM: Open Platform for Complex Physics Simulations Hrvoje Jasak h.jasak@wikki.co.uk, hrvoje.jasak@fsb.hr FSB, University of Zagreb, Croatia Wikki Ltd, United Kingdom 18th October 2007 OpenFOAM: Open
Partitioned strongly coupled Fluid-Structure Interaction
Partitioned strongly coupled Fluid-Structure Interaction 7 th OpenFOAM Workshop Darmstadt, Germany Manuel Kosel * 1 and Ulrich Heck 2 1 Center for Computational Engineering Science, RWTH Aachen University,
Description: Learning Outcomes:
Syllabus: GD215 / Web Design For Commercial Projects Course Day/Time Wednesdays 1:30-4:45pm Location CDM Room 623 Office Hours Wednesdays 5-6pm CDM 522 Final Project Day/Time Wednesday 11/14/18 at 1:30pm
Flow Simulation How to Handle a Vortex Across a Pressure Boundary
Flow Simulation How to Handle a Vortex Across a Pressure Boundary Overview This document describes why Flow Simulation will give a warning while solving stating that there is a vortex occurring across
Research and Developments in Modularizing HVAC Elements for CFD Software
Research and Developments in Modularizing HVAC Elements for CFD Software Masashi IMANO The University of Tokyo, Japan The Open CAE Society of Japan 1 Outline 1. Introduction 2. What is CFD parts? 3. CFD
FIFTH GRADE Mathematics Curriculum Map Unit 1
FIFTH GRADE Mathematics Curriculum Map Unit 1 VOCABULARY algorithm area model Associative Property base braces brackets Commutative Property compatible numbers decimal decimal point Distributive Property
CS 4400 Database Systems. Meeting 1: Introduction Brandon Myers University of Iowa
CS 4400 Database Systems Meeting 1: Introduction Brandon Myers University of Iowa One of my research projects select count(*), mass from Particles where x > 0 and x < 10 group by mass/10 http://www.pnl.gov/news/release.aspx?id=908
Web Design Course Syllabus and Course Outline
Web Design Course Syllabus and Course Outline COURSE OVERVIEW AND GOALS In today's world, web pages are the most common medium for sharing ideas and information. Learning to design websites is an incredibly
Coupling OpenFOAM and MBDyn with precice coupling tool
Coupling OpenFOAM and MBDyn with precice coupling tool Mikko Folkersma Faculty of Aerospace Engineering Section of Wind Energy Delft University of Technology Delft, The Netherlands Outline 1. Introduction
Cleveland State University
Cleveland State University CIS 260/500 Introduction to Programming (4 credits). Spring 2015 Section 2/ 50 Class Nbr. 1810/1855 Tue, Thu 12:30 PM 2:20 PM Section 2/ 50 Class Nbr. 1813/1856. Tue, Thu 4:00
Team 194: Aerodynamic Study of Airflow around an Airfoil in the EGI Cloud
Team 194: Aerodynamic Study of Airflow around an Airfoil in the EGI Cloud CFD Support s OpenFOAM and UberCloud Containers enable efficient, effective, and easy access and use of MEET THE TEAM End-User/CFD
Tutorial Two Built in Mesh
Built in Mesh 4 th edition, Jan. 2018 This offering is not approved or endorsed by ESI Group, ESI-OpenCFD or the OpenFOAM Foundation, the producer of the OpenFOAM software and owner of the OpenFOAM trademark.
Convective Heat transfer in a vertical slot for the course CFD with OpenSource Software
for the course CFD with OpenSource Software Applied Mechanics/Fluid Dynamics, Chalmers University of Technology, Gothenburg, Sweden December 10, 2016 December 10, 2016 1 / Contents 1 Introduction 2 buoyantboussinesqsimplefoam
Turbine-99 unsteady simulations Validation
IOP Conference Series: Earth and Environmental Science Turbine-99 unsteady simulations Validation To cite this article: M J Cervantes et al 2010 IOP Conf. Ser.: Earth Environ. Sci. 12 012014 View the article
Computer Programming AAS Spring 2019 Outcomes
Computer Programming AAS Spring 2019 Outcomes 1. Demonstrate professionalism including presentation skills, utilizing research for problem solving, working independently and in teams, being accountable
Getting started with my.acap
Getting started with my.acap A resource for Students, including: 1. Logging in to my.acap 2. Accessing your Classes 3. Participant Profiles a. Updating your own Profile 4. Announcements and Discussion
Marine Hydrodynamics Solver in OpenFOAM
Marine Hydrodynamics Solver in OpenFOAM p. 1/14 Marine Hydrodynamics Solver in OpenFOAM Hrvoje Jasak and Henrik Rusche h.jasak@wikki.co.uk, h.rusche@wikki.co.uk Wikki, United Kingdom and Germany 4 December