Troubleshooting Cannot Capture Movies or Still Pictures from DVD CAM

Size: px
Start display at page:

Download "Troubleshooting Cannot Capture Movies or Still Pictures from DVD CAM"

Transcription

1 DVD CAM Software Support Center Troubleshooting Cannot Capture Movies or Still Pictures from DVD CAM DZ-MV238E, 230A/E, 208E, 200A/E Windows 98 Cannot Capture Movies or Still Pictures from DVD CAM (98) Check if the drive icon of DVD CAM appears with My Computer. See "Checking If the Drive Icon of the DVD CAM Appears (98)" on page 2 for the procedures. Check if the DVD CAM is connected with the PC using Device Manager. See "Checking if the DVD CAM Is Connected with the PC Using Device Manager (98)" on page 2 for the procedures. Check the device setting with the program. See "Device Setting with DVD MovieFactory for DVD CAM" on page 2 for the procedures. Check if you are using the correct Source Disc and application that supports the media by referring to the following table. Source Disc Type Software to Use DVD-RAM, DVD-R Movie DVD MovieFactory SE for DVD CAM DVD-RAM Still Picture Any programs that support still pictures files in the JPEG format Check if the UDF driver in the CD-ROM supplied with the PC Kit DZ-WINPC3W has been installed. Before installing the UDF driver in the CD-ROM supplied with the DVD CAM, check to see if another UDF driver or packet-writing software such as the VOB InstantWrite UDF driver has already been installed your PC. If you have installed any other CD/DVD writing software in your PC, another UDF driver or packet-writing software bundled with or comprising the CD/DVD writing software may be installed. If another UDF or packet-writing software has been installed, uninstall it and then install the UDF driver) in the CD-ROM supplied with the DVD CAM. To uninstall the UDF Reader supplied with DZ-MV100A/E and the InstantWrite UDF driver supplied with the DVD CAM PC Kits such as DZ-WINPC3W and DZ-WINPC4W, please do the following: 1. Go to Start > Settings > Control Panel > Add/Remove Programs. 2. Click the Change/Remove button. 3. When you are prompted to confirm deleting shared files with a Remove Shared File? dialog box, click the No to All button. 1

2 Checking If the Drive Icon of the DVD CAM Appears (98) 1. Double-click My Computer from Desktop. 2. When the DVD CAM is turn on to the VIDEO or PHOTO position, check if the drive icon is shown below. If the drive icon does not appear, perform procedures in "No Drive Icon of DVD CAM Appears on PC (98)" on page 4. The driver letter of the DVD CAM varies, depending on the PC hardware configurations. Checking if the DVD CAM Is Connected with the PC Using Device Manager (98) 1. From the Start button, click Settings > Control Panel. 2. Double-click System. 3. Click the Device Manager tab. 4. Under CDROM, check if HITACHI DZMV2 appears. 5. Right-click HITACHI DZMV2, and click Properties. 6. Under Device status in the General tab, check if This device is working properly. appears.. 7. Under SCSI Controllers, check if Hitachi DVD CAMERA SCSI Interface appears. If it does not appear, reinstall the UDB driver by referring to "Uninstalling and Reinstalling the USB Driver" on page Right-click Hitachi DVD CAMERA SCSI Interface, and then click Properties. 9. Under Device status box on the General tab, check if This device is working properly. appears. If it does not appear, reinstall the UDB driver by referring to "Uninstalling and Reinstalling the USB Driver" on page Under Universal Serial Bus controllers, check if Hitachi DVD CAMERA USB Interface appears. If it does not appear, reinstall the UDB driver by referring to "Uninstalling and Reinstalling the USB Driver" on page Right-click Hitachi DVD CAMERA USB Interface, and then click Properties. 12. Under Device status box on the General tab, check if This device is working properly. appears. If it does not appear, reinstall the UDB driver by referring to "Uninstalling and Reinstalling the USB Driver" on page 5. Device Setting with DVD MovieFactory for DVD CAM 1. Before capturing videos, check the capture settings. 2. Start DVD MovieFactory SE, and then click Capture video. 2

3 3. Click the Capture plug-in icon. 4. Make sure if Ulead DVD-VR Plug-in has been selected in the Current capture plug-in box. If not selected, select Ulead DVD-VR Plug-in, and then click OK. 5. Click the Capture settings icon, and then click Video Properties. 6. When capturing video from a DVD-RAM disc, make sure if the DVD-RTAV folder in the DVD CAM drive has been selected. When capturing video from a DVD-R disc, make sure if the VIDEO_TS folder in the DVD CAM drive has been selected. If not selected, select the DVD-RTAV folder in the DVD-RAM disc or the VIDEO_TS folder in the DVD-R disc. 7. Click the Capture video icon to start capturing video. Tip Capturing video may take a long time. To shorten the capture time, create a play list of clips only you want to capture with the DVD CAM, and then select the play list to capture in the Select Playlist dialog box. Capturing Movies How to export programs recorded on a DVD-RAM disc with the DVD CAM into your PC 1. Start DVD MovieFactory SE, and then click Capture video. 2. Click the Capture plug-in icon. 3. In the Current capture plug-in box, select Ulead DVD-VR Plug-in, and then click OK. 4. Click the Capture settings icon, and then click Video Properties. 5. When capturing video from a DVD-RAM disc, select the DVD-RTAV folder in the DVD CAM drive. When capturing video from a DVD-R disc, select the VIDEO_TS folder in the DVD CAM drive. 6. Click the Capture video icon to start capturing video. 7. In the Select Playlist dialog box, select a play list that you want to capture or ALL, and then click Next. 8. In the Select Scenes To Capture dialog box, select one or more thumbnails of scenes that you want to capture. Tip To select two or more successive scenes, click one thumbnail, hold down the Shift key, and then click the hold down the Shift key, and click the end scene of them. To select two or more scenes each, hold down the Ctrl key, and then click any scenes. Capturing video may take a long time. To shorten the capture time, create a play list of clips only you want to capture with the DVD CAM, and then select the play list to capture in the Select Playlist dialog box. Capturing Still Pictures Using any programs that support still picture files in the JPEG format, you can capture still pictures stored in the 100HPNX1 folder under the DCIM folder on a DVD-RAM disc. Note Do not delete any files or folders or change those names on a DVD-RAM disc when capturing. 3

4 Tip You can copy still pictures to the PC using My Computer. Copying Still Pictures to the PC using My Computer 1. Insert a DVD-RAM disc from which you want capture pictures to the hard drive into the DVDCAM. 2. When you capture still pictures from a DVD-RAM, turn on the DVD CAM to the PHOTO position. 3. Connect the DVD CAM with the PC. 4. Open My Computer, and then double-click the DVD CAM drive icon. 5. Open the 100HPNX1 folder under the DCIM folder on a DVD-RAM disc. 6. Right-click still picture files that you want to capture, and click Copy. Note Do not delete any files or folders or change those names on a DVD-RAM when capturing. 7. Open a folder where you want to save the copied files, right-click the folder, and then click Paste. No Drive Icon of DVD CAM Appears on PC (98) Check that the DVD CAM power is on. Shut down Windows to turn off the PC, and then turn on the PC again. Reinstall the USB driver. See "Reinstalling the USB Driver (98)" below for how to reinstall the USB driver. Shut down Windows, disconnect the PC connection cable with the DVD CAM, and then turn on the PC. After Windows starts, connect the PC connection cable with the DVD CAM. Check that the PC connection cable is completely plugged into the DVD CAM and PC. Uninstall the USB driver, and then reinstall it. See "Uninstalling and Reinstalling the USB Driver (98)" on page 5 Reinstalling the USB Driver (98) 1. Connect the DVD CAM with the PC, and then turn on the DVD CAM. 2. Insert the CD-ROM supplied with the DZ-WINPC3W into the CD-ROM drive. 3. From the Start button, click Settings > Control Panel. 4. Double-click System. 5. Click the Device Manager tab. 6. If any of the following devices under Universal Serial Bus controllers or Other Devices appears with a yellow exclamation (!) or question (?) mark appears under Universal Serial Bus controllers or Other Devices, go to Step 9. If Hitachi DVD CAMERA USB Interface appears without a yellow exclamation (!) or question (?) mark, go to Step 7. USB Device 4

5 Hitachi DVD CAMERA USB Interface Unknown Device DVDCam DZ-MV2xx Series Tip To show devices under Universal Serial Bus controllers or Other Devices, click the + button next to it. 7. Check if any of the following devices appears under SCSI Controllers or Other Devices. If not appears, perform procedures in "No Drive Icon of DVD CAM Appears on PC (98)" on page 4. USB to SCSI Device Hitachi DVD CAMERA SCSI Interface Unknown Device 8. If the a yellow exclamation (!) or question (?) mark appears next to the device that you confirmed in Step 7, go to Step 9. If it does not appear, perform procedures in "No Drive Icon of DVD CAM Appears on PC (98)" on page Right-click the device name that appears with a yellow exclamation (!) or question (?) mark, and then click Properties. 10. Click the Driver tab, and then click the Update Driver button. The Upgrade Device Driver Wizard appears. 11. Click Next. 12. Select Search for the best driver for your device (Recommended), and then click Next. 13. Clear the Floppy disk drives, CD-ROM drive, and Microsoft Windows Update check boxes. 14. Click the Specify a location check box, and click Browse. 15. In the Browse for Folder dialog box, specify the CD-ROM drive into which the DZ-WINPC3W CD-ROM has been inserted, and click OK. If you are installing the USB driver updater downloaded from this web site, specify the \UP0307\USB folder. 16. Click Next. 17. Under a message Windows driver file search for the device:, make sure that the following location of the driver appear. If not appears, click Back, and then re-do Steps 13 to 16 Location of driver: drive-letter:\dzmv100u.inf 18. Click Next. 19. Click Finish. 20. Disconnect the DVD CAM with the PC, and restart Windows. 21. After Windows starts, connect the DVD CAM with the PC, and then turn on the DVD CAM. Check if the drive icon appears in My Computer. Uninstalling and Reinstalling the USB Driver (98) 1. Connect the DVD CAM with the PC, and then turn on the DVD CAM. 2. From the Start button, click Settings > Control Panel. 3. Double-click System. 5

6 4. Click the Device Manager tab. 5. If any of the following devices under Universal Serial Bus controllers or Other Devices appears under Universal Serial Bus controllers or Other Devices, perform procedures in "No Drive Icon of DVD CAM Appears on PC (98)" on page 4 USB Device Hitachi DVD CAMERA USB Interface Unknown Device DVDCam DZ-MV2xx Series Tip To show devices under Universal Serial Bus controllers or Other Devices, click the + button next to it. 6. Right-click the device that you confirmed in Step 5, click Uninstall. 7. Close the Device Manager. If Windows prompts you to restart Windows, click No. 8. Double-click My Computer from Desktop. 9. In My Computer, click View > Folder Options menu, and then click the View tab. 10. Under the Advanced settings in the Hidden files, select Show all files, and then click OK. 11. Double-click Windows folder in the hard drive. If the contents of the Windows folder do not appear, click Show Files. Note The Windows folders normally exist in the C drive. 12. Under the Windows folder, open the SYSTEM\ IOSUBSYS folder, and delete the DZMVSCSI.MPD file if the file exists. 13. Under the Windows folder, open the System32\drivers folder, and delete the DZMVUSB.SYS file if the file exists. 14. Under the Windows folder, open the INF fonder, and delete the following files if they exist. DZMV100S Hitachi Ltddzmv100u 15. Disconnect the DVD CAM with the PC, and restart Windows. 16. See "Installing the USB Driver (98)" below and reinstall the USB driver. Installing the USB Driver (98) 1. When Windows starts, connect the DVD CAM with the PC, and then turn on the DVD CAM. 2. Insert the CD-ROM supplied with the DZ-WINPC3W into the CD-ROM drive. 3. The Add New Hardware Wizard dialog box appears. Click Next. 4. Click Search for the best driver for your device (Recommended), and then click Next. 5. Clear the Floppy disk drives, CD-ROM drive, and Microsoft Windows Update check boxes. 6. Click the Specify a location check box, and then click Browse. 7. In the Browse for Folder dialog box, specify the CD-ROM drive into which the DZ-WINPC3W 6

7 CD-ROM has been inserted, and then click OK. If you are installing the USB driver updater downloaded from this web site, specify the \UP0307\USB folder. 8. Click Next. 9. Under a message Windows driver file search for the device:, make sure that the following location of the driver appear. If not appears, click Back, and then re-do Steps 5 to 8 Location of driver: drive-letter:\dzmv100u.inf 10. Click Next. 11. Click Finish. 12. Disconnect the DVD CAM with the PC, and restart Windows. 13. After Windows starts, connect the DVD CAM with the PC, and then turn on the DVD CAM. Check if the drive icon appears in My Computer. Tip For how to check the drive icon, see "Checking If the Drive Icon of the DVD CAM Appears" on page 2 7

Troubleshooting No Drive Icon of DVD CAM Appears on PC

Troubleshooting No Drive Icon of DVD CAM Appears on PC DVD CAM Software Support Center Troubleshooting No Drive Icon of DVD CAM Appears on PC DZ-MV238E, 230A/E, 208E, 200A/E Windows 98 No Drive Icon of DVD CAM Appears on PC (98) Check that the DVD CAM power

More information

Troubleshooting No Drive Icon of DVD CAM Appears on PC

Troubleshooting No Drive Icon of DVD CAM Appears on PC DVD CAM Software Support Center Troubleshooting No Drive Icon of DVD CAM Appears on PC DZ-MV238E, 230A/E, 208E, 200A/E Windows XP If the DVD CAM drive icon does not appear in My Computer when the DVD CAM

More information

Troubleshooting No Drive Icon of DVD CAM Appears on PC

Troubleshooting No Drive Icon of DVD CAM Appears on PC DVD CAM Software Support Center Troubleshooting No Drive Icon of DVD CAM Appears on PC DZ-MV100A/E Windows 2000 Download the USB driver updater, and then update the USB driver with the updater. The USB

More information

DZ-MV350/380 Software Tutorials

DZ-MV350/380 Software Tutorials DVD CAM Software Support Center DZ-MV350/380 Software Tutorials How to Remove USB and UDF Drivers Removing the USB Device Driver Windows XP 1. Set the DVDCAM power switch for Video, and connect the DVDCAM

More information

DZ-MV350/380 Software Tutorials

DZ-MV350/380 Software Tutorials DVD CAM Software Support Center DZ-MV350/380 Software Tutorials How to Install the USB Driver Installing the USB Driver 1. Close any running applications. If any anti-virus software is running, deactivate

More information

Registering Your D1 with the System (Windows 2000)

Registering Your D1 with the System (Windows 2000) Registering Your D1 with the System (Windows 2000) Before You Begin Confirm that your OHCI-compliant IEEE 1394 board or card has been correctly recognized by the system. If the board or card has been correctly

More information

Installation of fi-4110cu Scanner under Windows 2000

Installation of fi-4110cu Scanner under Windows 2000 Installation of fi-4110cu Scanner under Windows 2000 Connect the scanner to the PC. Turn on the scanner and then the PC Log into Windows Note: The user must log in with administrator authority. For information

More information

Chapter 2 Playing back Images on a Computer (Pictures/Movies) Section 1 Downloading Images to a Computer (For Windows)

Chapter 2 Playing back Images on a Computer (Pictures/Movies) Section 1 Downloading Images to a Computer (For Windows) Chapter 2 Playing back Images on a Computer (Pictures/Movies) Section 1 Downloading Images to a Computer (For Windows) This section explains displaying still images and movies you have downloaded to your

More information

Quick Guide for BlueSoleil Version 6

Quick Guide for BlueSoleil Version 6 LM540 Bluetooth USB Adapter Quick Guide for BlueSoleil Version 6 1. System Requirements At least 50MB of free disk space is required; Windows 7, Windows Vista or Windows XP operating systems are supported.

More information

Table of Contents. Introduction. 1 Installing Creative WebCam Notebook. 2 Using PC-CAM Center. 3 Creative WebCam Notebook Applications

Table of Contents. Introduction. 1 Installing Creative WebCam Notebook. 2 Using PC-CAM Center. 3 Creative WebCam Notebook Applications User s Guide Creative WebCam Notebook Information in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this manual

More information

SOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM

SOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM SOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM CONTENTS ABOUT THE SOFTWARE BEFORE INSTALLATION INSTALLING THE SOFTWARE CONNECTING TO A COMPUTER CONFIGURING THE PRINTER DRIVER TROUBLESHOOTING Page

More information

User s Guide. Creative WebCam NX Ultra

User s Guide. Creative WebCam NX Ultra User s Guide Creative WebCam NX Ultra Information in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this manual

More information

Intermediate Training

Intermediate Training Intermediate Training The material in this handout is taken directly from the Picasa Website. It was decided to add all the information in one place so it could be viewed at one time. However, what is

More information

Before you attempt to upgrade from the Live200 system to LiveLAN 3.1, make sure that you have the following:

Before you attempt to upgrade from the Live200 system to LiveLAN 3.1, make sure that you have the following: Overview This section describes the basic requirements necessary to upgrade your Live200 system to Live LAN 3.1. For more detailed information on the LiveLAN 3.1 system requirements, please refer to the

More information

SANYO Software Pack 9.1 For Digital Movie Camera INSTRUCTION MANUAL

SANYO Software Pack 9.1 For Digital Movie Camera INSTRUCTION MANUAL SANYO Software Pack 9.1 For Digital Movie Camera INSTRUCTION MANUAL Please read these instructions carefully before using. Be sure to keep this manual for later reference. ATTENTION Regarding permission

More information

Procedures to Install Eye Com's ImageMouse and ImageMouse Plus using Windows XP platform

Procedures to Install Eye Com's ImageMouse and ImageMouse Plus using Windows XP platform Procedures to Install Eye Com's ImageMouse and ImageMouse Plus using Windows XP platform 8-08-2005 The ImageMouse runs on the XP platform provided it is set up using NTFS, has the latest XP service pack

More information

NEC Versa TXi Release Notes. New Features. Processors. Serial Transfer Cable

NEC Versa TXi Release Notes. New Features. Processors. Serial Transfer Cable NEC Versa TXi Release Notes Congratulations on purchasing an NEC Versa TXi notebook computer! The NEC Versa TXi provides a high-performance, portable solution for your computing needs. Before using your

More information

MF9300. Software setup guide

MF9300. Software setup guide MF900 Software setup guide 0000 79-0 S INTRODUCTION This manual explains how to install and configure the software that is required for the printer function of the machine. The procedure for viewing the

More information

Version S Cincinnati, Suite 105 Tulsa, OK (918) Fax (918)

Version S Cincinnati, Suite 105 Tulsa, OK (918) Fax (918) Version 1.0 We pride ourselves in producing good stuff. If you have any questions, problems, or suggestions regarding this product, please contact us at: 810 S Cincinnati, Suite 105 Tulsa, OK 74119 (918)

More information

Operating Instructions

Operating Instructions Operating Instructions For Digital Camera PC Connection QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Computer, Inc., used under license. Connection with the PC Offers

More information

Lab 03. Windows Operating Systems (Cont.)

Lab 03. Windows Operating Systems (Cont.) Lab 03 s (Cont.) Objectives Develop a good understanding of 1. The role of an operating system in a computer system 2. Services provided by an operating system and have some hands on experience in 1. Understanding

More information

JUNE 2000 IC136C. USB Card

JUNE 2000 IC136C. USB Card USB Card JUNE 2000 IC136C CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500

More information

USER MANUAL for USB Data Link

USER MANUAL for USB Data Link Driver Installation Under Win 95 OSR2.1 1.Step1: Double click "My Computer" "System Properties" "Device Manager" Step2: While installing USB Data Link Cable under Windows 95 OSR2.1 mode, make sure "Universal

More information

SANYO Software Pack 7.8 For Digital Movie Camera INSTRUCTION MANUAL

SANYO Software Pack 7.8 For Digital Movie Camera INSTRUCTION MANUAL SANYO Software Pack 7.8 For Digital Movie Camera INSTRUCTION MANUAL Please read these instructions carefully before using. Be sure to keep this manual for later reference. ATTENTION Regarding permission

More information

Installation. Installation 1

Installation. Installation 1 Installation 1 Installation The SP35 printer is easy to install and use. It is also flexible; you can connect and use it in many different ways. Most often, one printer is connected to one PC. However,

More information

Operating Instructions

Operating Instructions Operating Instructions Image management/dvd production software VideoCam Suite 2.0 Thank you for using VideoCam Suite. Before use, please read these instructions completely. Panasonic Corporation 2008

More information

Lab Determining Data Storage Capacity

Lab Determining Data Storage Capacity Lab 1.3.2 Determining Data Storage Capacity Objectives Determine the amount of RAM (in MB) installed in a PC. Determine the size of the hard disk drive (in GB) installed in a PC. Determine the used and

More information

Introduction. This manual is divided into seven parts:

Introduction. This manual is divided into seven parts: Introduction The MAGPiX B350 is a digital camera with a specially designed 5x telescopic lens. Combined with its very high-speed shutter, the MAGPiX B350 produces amazing freeze-frame action pictures.

More information

59379 Digital Camera. Owner s Manual

59379 Digital Camera. Owner s Manual 59379 Digital Camera Owner s Manual 2006 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the property

More information

Installing the VS-700 Control Surface Plug-in

Installing the VS-700 Control Surface Plug-in Installing the VS-700 Control Surface Plug-in 1. Close all programs and any open windows. If you are running any antivirus programs the prevent software installation these will need to be disabled. 2.

More information

Digidoc Icon Camera Installation

Digidoc Icon Camera Installation Digidoc Icon Camera Installation 1. Insert the Icon Camera CD. Do not run anything from the cd until prompted. 2. Plug in the Icon Camera into a USB 2.0 port. This port MUST be 2.0. The PC will find the

More information

Samsung Digital Presenter Software User s Guide

Samsung Digital Presenter Software User s Guide Samsung Digital Presenter Software User s Guide Contents (Windows Program) Installing Samsung Digital Presenter Software...5 System requirements...5 Installing software...6 Connecting Samsung Digital

More information

Upgrading Software and Firmware

Upgrading Software and Firmware APPENDIXB This appendix describes how to upgrade or reinstall the Cisco PAM server software, desktop client software, and Gateway module firmware. Contents Upgrade Notes for Release 1.1.0, page B-2 Upgrading

More information

Sound Card Installation for Windows 95/98

Sound Card Installation for Windows 95/98 Sound Card Installation for Windows 95/98 Hardware Installation 1. Shut down Windows and power down system. Unplug power cable from the system. 2. Remove screws and open system enclosure. 3. Remove static

More information

(1) DirectCD. Software Operating Instructions MVC-CD200/CD Sony Corporation

(1) DirectCD. Software Operating Instructions MVC-CD200/CD Sony Corporation 3-067-952-12(1) DirectCD Software Operating Instructions MVC-CD200/CD300 2001 Sony Corporation Notice for users Program Copyright 1999 Adaptec, Inc. All rights reserved./ Documentation 2001 Sony Corporation

More information

User s Guide. Creative WebCam NX

User s Guide. Creative WebCam NX User s Guide Creative WebCam NX Information in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this manual may be

More information

PQA600A and PQASW Picture Quality Analyzer Application Install

PQA600A and PQASW Picture Quality Analyzer Application Install xx ZZZ PQA600A and PQASW Picture Quality Analyzer Application Install *P071312100* 071-3121-00 Copyright Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries

More information

A First-time driver installation for MP3X page 2 B Update MP36/MP35 driver page 5 C Update MP30 driver page 7

A First-time driver installation for MP3X page 2 B Update MP36/MP35 driver page 5 C Update MP30 driver page 7 Doc BSL Driver Guide v9 BSL Driver Guide Administrator Privileges Required 42 Aero Camino, Goleta, CA 93117 Tel (805) 685-0066 Fax (805) 685-0067 info@biopac.com www.biopac.com Select a driver installation

More information

PUB. DIM-823. Version 1

PUB. DIM-823. Version 1 PUB. DIM-823 Version 1 Corel Application Disc - Movie Playback and Editing and Various Disc Operations The Corel Application Disc CD-ROM includes software that will allow you to play back movies (SD or

More information

This is a GENERAL Servant Keeper Network Installation help sheet. If you need further assistance, please contact your network administrator.

This is a GENERAL Servant Keeper Network Installation help sheet. If you need further assistance, please contact your network administrator. SK Help Network Help Sheets - Workstation Installation This is a GENERAL Servant Keeper Network Installation help sheet. If you need further assistance, please contact your network administrator. Due to

More information

Firmware, Database, & PC Application Update Installation Instructions

Firmware, Database, & PC Application Update Installation Instructions Firmware, Database, & PC Application Update Installation Instructions IMPORTANT Please read before you begin the installation. To avoid possible errors, it is recommended to install the updates as described

More information

INTRODUCTION...1. Under Windows 98SE... 2 Under Windows ME... 6 Under Windows Under Windows XP...10

INTRODUCTION...1. Under Windows 98SE... 2 Under Windows ME... 6 Under Windows Under Windows XP...10 CONTENTS INTRODUCTION...1 I. Install the USB-IrDA Adaptor driver... 2 Under Windows 98SE... 2 Under Windows ME... 6 Under Windows 2000... 9 Under Windows XP...10 II. Make sure the USB-IrDA Adaptor installed

More information

User's Manual V 32.0

User's Manual V 32.0 User's Manual V 32.0 Trademark Acknowledgements Ford is a registered trademark of Ford Motor Company. Copyright Information DBS User s Manual. 2003, 2004 Ford Motor Company All rights reserved. The information,

More information

AUA DuoConnect for Notebooks. Installation Guide

AUA DuoConnect for Notebooks. Installation Guide R AUA-1422 DuoConnect for Notebooks Installation Guide In this Booklet What s in the Kit 2 System Requirements 2 Installation Overview 3 Step 1: Inserting the Adapter 3 Step 2: Installing the Device Drivers

More information

1 Introduction. 2 Safety. 2.1 General information TRUST 350 PORTABLE

1 Introduction. 2 Safety. 2.1 General information TRUST 350 PORTABLE 1 Introduction This instruction manual is for the TRUST SPACEC@M 350 PORTABLE. Basic knowledge of computers is necessary to be able to install this product. Please consult one of the Trust Customer Care

More information

Introduction. Basic Troubleshooting Tips. Computer Basics What are some troubleshooting techniques? What are Some Troubleshooting Techniques?

Introduction. Basic Troubleshooting Tips. Computer Basics What are some troubleshooting techniques? What are Some Troubleshooting Techniques? Computer Basics What are some troubleshooting techniues? Introduction What are Some Troubleshooting Techniues? The computer goes blank before the Word document was saved. The browser window freezes for

More information

User s Guide. Creative WebCam NX

User s Guide. Creative WebCam NX User s Guide Creative WebCam NX Information in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this manual may be

More information

Addonics TECHNOLOGIES. Mobile DVD/CDRW Firewire CardBus/PCMCIA USB. Users Guide Revision 2.0. For PC

Addonics TECHNOLOGIES. Mobile DVD/CDRW Firewire CardBus/PCMCIA USB. Users Guide Revision 2.0. For PC Addonics TECHNOLOGIES Mobile DVD/CDRW Firewire CardBus/PCMCIA USB For PC Users Guide Revision 2.0 FCC Warning Statement This equipment has been tested and found to comply with the limits for a class B

More information

2. install windows vista

2. install windows vista 2. install windows vista Windows Vista comes preloaded on many brand-new PCs. If you already have a computer with Windows Vista installed, you can go directly to Chapter 3, Move from another PC. If you

More information

Peerless Drive System User's Manual

Peerless Drive System User's Manual Peerless Drive System User's Manual Copyright 2001 Iomega Corporation Iomega, the stylized "i" logo, Peerless, and the Peerless brand block are either registered trademarks or trademarks of Iomega Corporation

More information

UG MCAP II & ecap II Smartware & USB Drivers Installation

UG MCAP II & ecap II Smartware & USB Drivers Installation MCAP II & ecap II Smartware & USB Drivers Installation Sept 4, 2008 Copyright 2008 by QEI Inc. ALL RIGHTS RESERVED NOTICE The information in this document has been carefully checked and is believed to

More information

To open AOL System Information Click Start, select All Programs or Programs, select AOL or America Online, and then click AOL System Information.

To open AOL System Information Click Start, select All Programs or Programs, select AOL or America Online, and then click AOL System Information. AOL Toolbar Check the system requirements for AOL toolbar Computers that fail to meet the minimum system requirements may experience this issue. Open AOL System Information to check whether it meets the

More information

Operating Instructions

Operating Instructions Operating Instructions High definition Image Management/Easy Editing Software HD Writer AE 1.0 for HDC Thank you for using HD Writer AE. Before use, please read these instructions completely. Panasonic

More information

Installing USB Drivers to Windows System

Installing USB Drivers to Windows System 1/9 Installing USB Drivers to Windows System Noptel Oy, Oulu Finland 1.3.2010 Noptel s USB devices uses USB/Serial Converters made by FTDI Ltd. The drivers for the USB Converter are provided by FTDI (http://www.ftdichip.com/).

More information

RTE for WIN32. Installation Manual (Rev.7.0) Midas lab

RTE for WIN32. Installation Manual (Rev.7.0) Midas lab Midas lab REVISION HISTORY Date Revision Chapter Explanation of revision March 11,2000 4.0 RTE4W32 Ver.5.0 (First edition) January 10,2002 4.1 Add Windows XP support (RTE4W32 Ver.5.05) October 29,2002

More information

Install Manual. P2 Software ENGLISH M0509AT5091 -FJ VQT2G26-4

Install Manual. P2 Software ENGLISH M0509AT5091 -FJ VQT2G26-4 Install Manual P2 Software M0509AT5091 -FJ ENGLISH VQT2G26-4 Contents Operating Precautions When Using Windows 1. Before Installing................................................... 3 2. Precautions in

More information

Driver Installation and Computer Connection Instructions

Driver Installation and Computer Connection Instructions Driver Installation and Computer Connection Instructions The connection between police law-enforcement video and audio recorder and the computer needs to be realized through professional management software.

More information

Contents Targus External PC Card DVD-ROM...1 Introduction... 1 System Requirements... 2 Media Formats... 3

Contents Targus External PC Card DVD-ROM...1 Introduction... 1 System Requirements... 2 Media Formats... 3 Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must

More information

EOS MOVIE Utility Ver. 1.5

EOS MOVIE Utility Ver. 1.5 ENGLISH Software for Playing, Merging and Movies EOS MOVIE Utility Ver. 1.5 Content of this Instruction Manual 1D C 1D X Mk II 1D X 5DS/5DS R 5D Mk III 6D 7D Mk II 70D EMU is used for EOS MOVIE Utility.

More information

USB driver and Software Installation. UPS Monitoring and Management Software

USB driver and Software Installation. UPS Monitoring and Management Software USB driver and Software Installation UPS Monitoring and Management Software LEN.MAN.SOF.143 Rev.1.00/2008 Installing USB driver and Easy-Mon X for LEONICS UPS 1. Installing and uninstalling the USB driver

More information

NEC Versa 500D/550D Windows 98 Upgrade Information

NEC Versa 500D/550D Windows 98 Upgrade Information NEC Versa 500D/550D Windows 98 Upgrade Information Follow the instructions provided in this document to upgrade your NEC Versa 500D/550D system to Microsoft Windows 98. Please read these notes in their

More information

Quick start guide. 8 cm (3z) DVD-R Single sided/ double sided. Single sided/ double sided DVD-RW

Quick start guide. 8 cm (3z) DVD-R Single sided/ double sided. Single sided/ double sided DVD-RW QSG_ENG.fm 1 ページ 2006 年 11 月 20 日 Contents Quick start guide Disc and card information..................................... below Discs that you can use for recording on this unit....................................

More information

USB DRIVER INSTALLATION GUIDE

USB DRIVER INSTALLATION GUIDE USB DRIVER INSTALLATION GUIDE Use these instructions to install the USB and Microsoft ActiveSync synchronization software for your Monarch Pathfinder Ultra Platinum 6039 printer and computer to communicate.

More information

SOFTWARE INSTALLATION AND USB CONNECTION GUIDE

SOFTWARE INSTALLATION AND USB CONNECTION GUIDE SOFTWARE INSTALLATION AND USB CONNECTION GUIDE ENGLISH LYT1197-001A COPYRIGHT 2003 VICTOR COMPANY OF JAPAN, LTD. M4D1 DSC Printed in Malaysia 1003-FO-ID-PJ This document explains the basic information

More information

AUA DuoConnect for Notebooks. Installation Guide

AUA DuoConnect for Notebooks. Installation Guide R AUA-1411 DuoConnect for Notebooks Installation Guide In this Booklet What s in the Kit 2 System Requirements 3 Installation Overview 4 Step 1: Installing the Adaptec USB CardBus Plug-in 4 Step 2: Inserting

More information

READ ME FIRST Windows 98/ME/2000

READ ME FIRST Windows 98/ME/2000 READ ME FIRST Windows 98/ME/2000 *DSL Equipment Installation Guide: Alcatel Speed Touch PC *Digital Subscriber Line Part Number: AlcatelPC9x02A Version 1.2-A Table of Contents Follow Steps 1 through 7

More information

User Manual. DriveStation Power Saving Utility. v2.3

User Manual. DriveStation Power Saving Utility.  v2.3 User Manual DriveStation Power Saving Utility The Power Save Utility is a simple utility that allows a user to schedule shut-down and startup times for the DriveStation disk. This is ideal for computers

More information

KODAK EASYSHARE Software CD V1.X Troubleshooting Guide for Mac OS X

KODAK EASYSHARE Software CD V1.X Troubleshooting Guide for Mac OS X KODAK EASYSHARE Software CD V1.X Troubleshooting Guide for Mac OS X Getting Started Use this information to solve problems installing KODAK EASYSHARE Software or getting KODAK EASYSHARE Software to function

More information

2 Port SATA II - 3Gbps PCI-Express Card

2 Port SATA II - 3Gbps PCI-Express Card 2 Port SATA II - 3Gbps PCI-Express Card User Manual English LINDY No. 51170 www.lindy.com LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (April 2005) 1. Introduction This Low Profile

More information

Hybrid Camera Easy Video Editing

Hybrid Camera Easy Video Editing The intent of this Guide is to assist you with performing the functions using the included Cyberlink software. If this is your first time using the software it is recommended that you follow this Guide

More information

Kinesense Milestone Getting Started

Kinesense Milestone Getting Started Kinesense Milestone Getting Started Install and User Guide Patricia McCabe, Kinesense Ltd Introduction This document contains an Installation Guide and Quick Start User Guide for Kinesense for Milestone.

More information

10ZiG Technology. Thin Desktop Quick Start Guide

10ZiG Technology. Thin Desktop Quick Start Guide 10ZiG Technology Thin Desktop Quick Start Guide 2010 05 20 Introduction This document is intended as a quick start guide for installing Thin Desktop. After reading this document, you will know how to:

More information

FileMaker. Mobile 2.1. User s Guide. For Windows, Mac, Palm OS, and Pocket PC. Companion for Palm OS and Pocket PC

FileMaker. Mobile 2.1. User s Guide. For Windows, Mac, Palm OS, and Pocket PC. Companion for Palm OS and Pocket PC For Windows, Mac, Palm OS, and Pocket PC FileMaker Mobile 2.1 Companion for Palm OS and Pocket PC User s Guide 2000-2002 FileMaker, Inc. All Rights Reserved. FileMaker, Inc. 5201 Patrick Henry Drive Santa

More information

Instruction Guide. Low-Profile 2-port IEEE 1394 FireWire PCI Card with Video Editing Software PCI1394_2LP

Instruction Guide. Low-Profile 2-port IEEE 1394 FireWire PCI Card with Video Editing Software PCI1394_2LP FIREWIRE CARD Low-Profile 2-port IEEE 1394 FireWire PCI Card with Video Editing Software PCI1394_2LP Instruction Guide * Actual product may vary from photo The Professionals Source For Hard-to-Find Computer

More information

USB to Serial Converter User s Guide

USB to Serial Converter User s Guide USB to Serial Converter User s Guide Important Note! In order to minimize possible installation problems and/or resource conflicts: Read Me First! About This User s Guide This User s Guide is designed

More information

TOP10 TV3 User s Manual

TOP10 TV3 User s Manual TOP10 TV3 User s Manual 1 About This Guide This guide describes the installation and basic usage of the TOP10 TV3. This guide will help you get started in using these products. If you require further information

More information

Plug the USB cable into the WebMaster/WebAlert and your computer. You will see this message on your screen

Plug the USB cable into the WebMaster/WebAlert and your computer. You will see this message on your screen QUICK START GUIDE USB DRIVER INSTALLATION Step 1 Plug the USB cable into the WebMaster/WebAlert and your computer. You will see this message on your screen Step 2 Go to Start, Control Panel and Click System

More information

PC Connecting Kit. Operating Instructions

PC Connecting Kit. Operating Instructions 3-859-881-23(1) PC Connecting Kit Operating Instructions For the latest information on this product For Windows: Refer to the readme.txt file on the supplied CD-ROM. For Macintosh: Refer to the ReadMe

More information

Installing the Cisco Unified MeetingPlace Web Server Software

Installing the Cisco Unified MeetingPlace Web Server Software Installing the Cisco Unified MeetingPlace Web Server Software Release 8.5 Revised: 2/19/13 : Install the Application Server (which includes the Software Media Server) : Install the Hardware Media Server

More information

HOW WILL THIS AFFECT OUR PCS?

HOW WILL THIS AFFECT OUR PCS? AccessHHS (Citrix) WHAT IS ACCESSHHS (CITRIX)? Computer users will be given access to the applications they use and need through a central log-in screen called AccessHHS. HOW WILL THIS AFFECT OUR PCS?

More information

Bridge Cable User s Guide

Bridge Cable User s Guide Bridge Cable User s Guide Table of Contents Overview -------------------------------------------------------------------- 2 Driver Installation --------------------------------------------------------

More information

Getting Started. Here's how to get started using your Zip 250 drive: 1. Unpack the Zip 250 drive and accessories.

Getting Started. Here's how to get started using your Zip 250 drive: 1. Unpack the Zip 250 drive and accessories. Getting Started IMPORTANT! Before installing or using your Zip 250 drive, read and follow the USB guidelines to ensure reliable performance of your USB devices. Here's how to get started using your Zip

More information

Operating Instructions

Operating Instructions Operating Instructions For Digital Camera PC Connection QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom. VQT1H07 Connection with the

More information

PropertyBoss Upgrade

PropertyBoss Upgrade Installation Guide EMC128-2013 1998-2013 PropertyBoss Solutions. Introduction This document covers 2 upgrade scenarios. Please determine which is required before beginning. Note: The Release version or

More information

Quick Installation Guide TU-S9

Quick Installation Guide TU-S9 Quick Installation Guide TU-S9 V1 Table of Contents English 1 1. Before You Start 1 2. How to Install 2 Troubleshooting 7 Version 06.24.2010 1. Before You Start Package Contents TU-S9 CD-ROM (Driver) Multi-Language

More information

ESS I-Cap ver 1.0x. ESS I-cap Program Users Manual. clear-cut. Image Capture, Catalog, and Report Generation

ESS I-Cap ver 1.0x. ESS I-cap Program Users Manual. clear-cut. Image Capture, Catalog, and Report Generation ESS I-Cap ver 1.0x clear-cut Image Capture, Catalog, and Report Generation - 1 - Table of Contents System Requirements...3 Hardware Installation:...3 Software installation:...3 Video Source...5 The Video

More information

Appendix B. Install Microsoft Personal Web Server

Appendix B. Install Microsoft Personal Web Server Appendix B Install Microsoft Personal Web Server 2 How to Do Everything with FrontPage 2002 When you construct a Web site, you can either designate the site as disk-based or server-based. A disk-based

More information

Firmware, Database, & PC Application Update Installation Instructions

Firmware, Database, & PC Application Update Installation Instructions Firmware, Database, & PC Application Update Installation Instructions IMPORTANT Please read before you begin the installation. To avoid possible errors, it is recommended to install the updates as described

More information

Install Manual. P2 Software ENGLISH

Install Manual. P2 Software ENGLISH Install Manual P2 Software M0509KT7033 -PS ENGLISH VQT2G25-6 (E) Contents Operating Precautions............................................ 2 When Using Windows............................................

More information

5.2. Click these tabs to jump to the Table of Contents, Index or start of each chapter.

5.2. Click these tabs to jump to the Table of Contents, Index or start of each chapter. 5.2 Click these tabs to jump to the, or start of each chapter. Click this button to advance to the next page. Click this button to return to the previous page. (Since this is the starting page, the [Back]

More information

Section 1: Installation and Activation

Section 1: Installation and Activation Section 1: Installation and Activation System requirements This is the minimal system configuration required to use Readiris: A Mac computer with a 64 bits Intel processor. The operating system Mac OS

More information

Matrox M-Series ENGLISH. M9120 PCIe 16 M9120 Plus LP PCIe 1 or 16 M9125 PCIe 16 M9138 LP PCIe 16 M9140 LP PCIe 16 M9148 LP PCIe 16.

Matrox M-Series ENGLISH. M9120 PCIe 16 M9120 Plus LP PCIe 1 or 16 M9125 PCIe 16 M9138 LP PCIe 16 M9140 LP PCIe 16 M9148 LP PCIe 16. ENGLISH Matrox M-Series M9120 PCIe 16 M9120 Plus LP PCIe 1 or 16 M9125 PCIe 16 M9138 LP PCIe 16 M9140 LP PCIe 16 M9148 LP PCIe 16 User Guide 20070-301-0110 2009.06.10 Contents Contents...2 About this user

More information

Reinstalling the Operating System on the Dell PowerVault 745N

Reinstalling the Operating System on the Dell PowerVault 745N Reinstalling the Operating System on the Dell PowerVault 745N This document details the following steps to reinstall the operating system on a PowerVault 745N system: 1. Install the Reinstallation Console

More information

Agilent IO Libraries L.02.xx or higher

Agilent IO Libraries L.02.xx or higher Installation Instructions for use with the Agilent ChemStation After installing the GPIB 82350A or 82350B board in the computer, it is necessary to install or upgrade the corresponding driver and configuration

More information

Installation Instructions

Installation Instructions Model: EAK0226L40A Okidata B4250 Printer Kit Page: 1 of 17 Installation Instructions INSTALLATION MUST BE PERFORMED BY QUALIFIED EQUISERV PERSONNEL ONLY INSTALLATION OVERVIEW: These instructions are for

More information

PRINTER INSTALLATION GUIDE

PRINTER INSTALLATION GUIDE with OptiEC PRO PRINTER INSTALLATION GUIDE www.mfdigital.com Table Of Contents Subject Page Minimum System Requirements..3 Installing the Firewire Adapter & Software Identifiers...4 Installing the Driver

More information

mce100+ getting started guide Install mce100+ The disc will run and display the below screen: Choose Install mce to continue

mce100+ getting started guide Install mce100+ The disc will run and display the below screen: Choose Install mce to continue content between two the phonebook records of a content from a 1. Insert the mce CD. 2. Choose the Run mce Setup button. The disc will run and display the below screen: Choose mce to continue 5. Ready to

More information

Backpack Help and User's Guide rev

Backpack Help and User's Guide rev Backpack Help and User's Guide rev 03.01.02 Getting Started To get started with backpack, first install the software driver from the diskette. After restarting your computer you will be ready to use the

More information

Windows NT Server Printer Driver Upgrade Instructions

Windows NT Server Printer Driver Upgrade Instructions Windows NT Server Printer Driver Upgrade Instructions The steps detailed below describe the most reliable method to upgrade printer driver versions after v1.6.0227a on a Windows NT 4.0 Server that is shared

More information

VMware Workstation 4 What s New Requirements Installation Guest OS Installation Documentation Troubleshooting Prev Contents Last Next Installing VMware Tools The following sections describe how to install

More information